Unable to find a medium containing a live file system Attempt interactive netboot from a URL? yes no (default yes): yes Available qeth devices: lszdev: No device was selected! zdev to activate (comma separated, optional): 1100 [ 152.186668] lcs: Loading LCS driver A manual update of the initial RAM-disk is required. QETH device 0.0.1100:0.0.1101:0.0.1102 configured Note: The initial RAM-disk must be updated for these changes to take effect: - QETH device 0.0.1100:0.0.1101:0.0.1102 Two methods available for IP configuration: * static: for static IP configuration * dhcp: for automatic IP configuration static dhcp (default 'dhcp'): static ip: 10.192.192.3 netmask (default 255.255.255.0): gateway (default 10.192.192.192.1): dns (default 10.192.192.192.1): vlan id (optional): 2780 Available interfaces: enc1100 enc1180 enc118a enc11c0 enc1300 enc1340 enc1540 enc1580 enc15c1 enc15ca enc1700 enc1740 device (default enc1100): enc1100 http://cdimage.ubuntu.com/releases/lunar/release/ubuntu-23.04-live-server-s390x.iso (default) url: http://10.192.192.192.2:80/ubuntu-live-server-23.04/ubuntu-23.04-live-server-s390x.iso http_proxy (optional): ... [ 416.960425] 8021q: 802.1Q VLAN Support v1.8 [ 416.960430] 8021q: adding VLAN 0 to HW filter on device enc1100 Configuring networking... QETH device 0.0.1100:0.0.1101:0.0.1102 already configured Begin: Waiting up to 180 secs for enc1100.2780 to become available ... Failure: Network device did not appear in time done. IP-Config: enc1100.2780 hardware address 02:ca:09:00:72:1a mtu 1500 IP-Config: enc1100.2780 guessed broadcast address 10.192.192.192.255 IP-Config: enc1100.2780 complete: address: 10.192.192.3 broadcast: 10.192.192.192.255 netmask: 255.255.255.0 gateway: 10.192.192.192.1 dns0 : 10.192.192.192.1 dns1 : 0.0.0.0 rootserver: 0.0.0.0 rootpath: filename : Begin: Trying netboot from 0.0.0.0: ... Begin: Trying to download and mount http://10.192.192.192.2:80/ubuntu-live-server-23.04/ubuntu-23.04-live-server-s390x.iso ... Connecting to 10.192.192.192.2:80 (10.192.192.192.2:80) saving to 'ubuntu-23.04-live-server-s390x.iso' ubuntu-23.04-live-se 8% |** | 95.1M 0:00:10 ETA ubuntu-23.04-live-se 19% |****** | 207M 0:00:08 ETA ubuntu-23.04-live-se 29% |********* | 319M 0:00:07 ETA ubuntu-23.04-live-se 40% |************ | 431M 0:00:05 ETA ubuntu-23.04-live-se 50% |**************** | 542M 0:00:04 ETA ubuntu-23.04-live-se 60% |******************* | 654M 0:00:03 ETA ubuntu-23.04-live-se 71% |********************** | 766M 0:00:02 ETA ubuntu-23.04-live-se 81% |************************** | 878M 0:00:01 ETA ubuntu-23.04-live-se 92% |***************************** | 990M 0:00:00 ETA [ 426.741259] loop0: detected capacity change from 0 to 2198892 [ 426.833675] loop1: detected capacity change from 0 to 294232 [ 426.853633] loop2: detected capacity change from 0 to 719672 [ 426.873654] loop3: detected capacity change from 0 to 791368 [ 426.893620] loop4: detected capacity change from 0 to 91256 [ 426.895448] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. ubuntu-23.04-live-se 100% |********************************| 1073M 0:00:00 ETA 'ubuntu-23.04-live-server-s390x.iso' saved done. done. Begin: Creating debconf-communicate fifo mechanism ... done. ... Starting [0;1;39msystemd-timedated rvice[0m - Time & Date Service... connecting... - \ | It is possible to connect to the installer over the network, which might allow the use of a more capable terminal and can offer more languages than can be rendered in the Linux console. To connect, SSH to installer@10.192.192.3. The password you should use is "aniscen34rINCOQSS". The host key fingerprints are: RSA SHA256:JSMjqgverrbratbrtbnhhhFZeNnbH3E16tuP3EzPr+o ECDSA SHA256:7HuTgawy4voinoninpomaswmsmww2344so9KkMf3JhA ED25519 SHA256:UCfMso9KkMf3JhAVLIewKsNCpwa5X2HSZy4JVsKHZu4 ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ Network connections [ Help ] ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ Configure at least one interface this server can use to talk to other machines, and which preferably provides sufficient access for updates. NAME TYPE NOTES ▴ [ enc1100 eth - ▸ ] █ 02:ca:09:00:72:1a / Unknown Vendor / Unknown Model [ enc1100.2780 vlan - ▸ ] static 10.192.192.3/24 VLAN 2780 on interface enc1100 [ enc1180 eth - ▸ ] disabled 02:ca:09:00:15:d7 / Unknown Vendor / Unknown Model [ enc118a eth - ▸ ] disabled ▾ [ Done ] [ Back ] ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ Network connections [ Help ] ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ┌─────────────────────────── Info for enc1100 ───────────────────────────┐ │ │ │ addresses: ▴ │ │ - address: fe80::ca:9ff:fe00:721a/64 █ │ │ family: 10 │ │ scope: link │ │ source: static │ │ bond: │ │ is_master: false │ │ is_slave: false │ │ lacp_rate: null │ │ master: null │ │ mode: null │ │ slaves: [] │ │ xmit_hash_policy: null ▾ │ │ │ │ [ Close ] │ │ │ └────────────────────────────────────────────────────────────────────────┘ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ Network connections [ Help ] ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ┌───────────────────────── Info for enc1100.2780 ────────────────────────┐ │ │ │ addresses: ▴ │ │ - address: fe80::ca:9ff:fe00:721a/64 █ │ │ family: 10 │ │ scope: link │ │ source: static │ │ - address: 10.192.192.3/24 │ │ family: 2 │ │ scope: global │ │ source: static │ │ bond: │ │ is_master: false │ │ is_slave: false │ │ lacp_rate: null ▾ │ │ │ │ [ Close ] │ │ │ └────────────────────────────────────────────────────────────────────────┘ fheimes@T570:~$ ssh ubuntu@10.192.192.3 The authenticity of host '10.192.192.3 (10.192.192.3)' can't be established. ECDSA key fingerprint is SHA256:dax0848coewinVyA0GY0tN4hGuIshqUp4qf4oqdFKbA. Are you sure you want to continue connecting (yes/no/[fingerprint])? yes Warning: Permanently added '10.192.192.3' (ECDSA) to the list of known hosts. Welcome to Ubuntu 23.04 (GNU/Linux 6.2.0-20-generic s390x) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage System information as of Mon Jun 5 11:33:03 AM UTC 2023 System load: 0.02 Memory usage: 1% Processes: 221 Usage of /: 0.1% of 6.93TB Swap usage: 0% Users logged in: 0 9 updates can be applied immediately. To see these additional updates run: apt list --upgradable The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. To run a command as administrator (user "root"), use "sudo ". See "man sudo_root" for details. ubuntu@testlpar3:~$ uptime 11:33:18 up 1 min, 1 user, load average: 0.02, 0.12, 0.08 ubuntu@testlpar3:~$ ubuntu@testlpar3:~$ cat /etc/netplan/00-installer-config.yaml # This is the network config written by 'subiquity' network: ethernets: enc1100: {} enc1180: dhcp4: true enc118a: dhcp4: true enc11c0: dhcp4: true enc1300: dhcp4: true enc1340: dhcp4: true enc1540: dhcp4: true enc1580: dhcp4: true enc15c1: dhcp4: true enc15ca: dhcp4: true enc1700: dhcp4: true enc1740: dhcp4: true version: 2 vlans: enc1100.2780: addresses: - 10.192.192.23/24 gateway4: 10.192.192.192.1 id: 2780 link: enc1100 nameservers: addresses: - 10.192.192.192.1 ubuntu@testlpar3:~$