[ 0.000000] dt-cpu-ftrs: setup for ISA 3000 [ 0.000000] dt-cpu-ftrs: final cpu/mmu features = 0x0001f86b8f5fb187 0x3c007041 [ 0.000000] radix-mmu: Page sizes from device-tree: [ 0.000000] radix-mmu: Page size shift = 12 AP=0x0 [ 0.000000] radix-mmu: Page size shift = 16 AP=0x5 [ 0.000000] radix-mmu: Page size shift = 21 AP=0x1 [ 0.000000] radix-mmu: Page size shift = 30 AP=0x2 [ 0.000000] Activating Kernel Userspace Execution Prevention [ 0.000000] Activating Kernel Userspace Access Prevention [ 0.000000] radix-mmu: Mapped 0x0000000000000000-0x0000000040000000 with 1.00 GiB pages (exec) [ 0.000000] radix-mmu: Mapped 0x0000000040000000-0x0000002000000000 with 1.00 GiB pages [ 0.000000] radix-mmu: Initializing Radix MMU [ 0.000000] Linux version 5.11.0-11-generic (buildd@bos02-ppc64el-002) (gcc (Ubuntu 10.2.1-20ubuntu1) 10.2.1 20210220, GNU ld (GNU Binutils for Ubuntu) 2.36.1) #12-Ubuntu SMP Mon Mar 1 19:26:20 UTC 2021 (Ubuntu 5.11.0-11.12-generic 5.11.0) [ 0.000000] Secure boot mode disabled [ 0.000000] Found initrd at 0xc000000004980000:0xc00000000b142011 [ 0.000000] OPAL: Found memory mapped LPC bus on chip 0 [ 0.000000] ISA: Non-PCI bridge is /lpcm-opb@6030000000000/lpc@0 [ 0.000000] Using PowerNV machine description [ 0.000000] CPU maps initialized for 4 threads per core [ 0.000000] (thread shift is 2) [ 0.000000] Allocated 4864 bytes for 32 pacas [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x2000000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x0001f86b8f5fb187 [ 0.000000] possible = 0x000ffbfbcf5fb187 [ 0.000000] always = 0x0000000380008181 [ 0.000000] cpu_user_features = 0xdc0065c2 0xaef00000 [ 0.000000] mmu_features = 0x3c007641 [ 0.000000] firmware_features = 0x0000000110000000 [ 0.000000] vmalloc start = 0xc008000000000000 [ 0.000000] IO start = 0xc00a000000000000 [ 0.000000] vmemmap start = 0xc00c000000000000 [ 0.000000] ----------------------------------------------------- [ 0.000000] kvm_cma_reserve: reserving 6553 MiB for global area [ 0.000000] cma: Reserved 6560 MiB at 0x0000001e62000000 [ 0.000000] numa: NODE_DATA [mem 0x1fff444900-0x1fff44bfff] [ 0.000000] rfi-flush: mttrig type flush available [ 0.000000] rfi-flush: patched 12 locations (mttrig type flush) [ 0.000000] count-cache-flush: flush disabled. [ 0.000000] link-stack-flush: software flush enabled. [ 0.000000] entry-flush: patched 61 locations (mttrig type flush) [ 0.000000] uaccess-flush: patched 1 locations (mttrig type flush) [ 0.000000] stf-barrier: eieio barrier available [ 0.000000] stf-barrier: patched 61 entry locations (eieio barrier) [ 0.000000] stf-barrier: patched 12 exit locations (eieio barrier) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0000000) [ 0.000000] PCI host bridge /pciex@600c3c0000000 (primary) ranges: [ 0.000000] MEM 0x000600c000000000..0x000600c07ffeffff -> 0x0000000080000000 [ 0.000000] ioremap() called early from pnv_pci_init_ioda_phb+0x38c/0x9a8. Use early_ioremap() instead [ 0.000000] MEM 0x0006000000000000..0x0006003fffffffff -> 0x0006000000000000 (M64 #1..31) [ 0.000000] Using M64 #31 as default window [ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000] [ 0.000000] M64: 0x4000000000 [segment=0x20000000] [ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfe000) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0100000) [ 0.000000] PCI host bridge /pciex@600c3c0100000 ranges: [ 0.000000] MEM 0x000600c080000000..0x000600c0fffeffff -> 0x0000000080000000 [ 0.000000] ioremap() called early from pnv_pci_init_ioda_phb+0x38c/0x9a8. Use early_ioremap() instead [ 0.000000] MEM 0x0006004000000000..0x0006007fffffffff -> 0x0006004000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd800) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0200000) [ 0.000000] PCI host bridge /pciex@600c3c0200000 ranges: [ 0.000000] MEM 0x000600c100000000..0x000600c17ffeffff -> 0x0000000080000000 [ 0.000000] ioremap() called early from pnv_pci_init_ioda_phb+0x38c/0x9a8. Use early_ioremap() instead [ 0.000000] MEM 0x0006008000000000..0x000600bfffffffff -> 0x0006008000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd000) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0300000) [ 0.000000] PCI host bridge /pciex@600c3c0300000 ranges: [ 0.000000] MEM 0x000600c180000000..0x000600c1fffeffff -> 0x0000000080000000 [ 0.000000] ioremap() called early from pnv_pci_init_ioda_phb+0x38c/0x9a8. Use early_ioremap() instead [ 0.000000] MEM 0x0006020000000000..0x0006023fffffffff -> 0x0006020000000000 (M64 #1..31) [ 0.000000] Using M64 #31 as default window [ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000] [ 0.000000] M64: 0x4000000000 [segment=0x20000000] [ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfc000) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0400000) [ 0.000000] PCI host bridge /pciex@600c3c0400000 ranges: [ 0.000000] MEM 0x000600c200000000..0x000600c27ffeffff -> 0x0000000080000000 [ 0.000000] ioremap() called early from pnv_pci_init_ioda_phb+0x38c/0x9a8. Use early_ioremap() instead [ 0.000000] MEM 0x0006024000000000..0x0006027fffffffff -> 0x0006024000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb800) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0500000) [ 0.000000] PCI host bridge /pciex@600c3c0500000 ranges: [ 0.000000] MEM 0x000600c280000000..0x000600c2fffeffff -> 0x0000000080000000 [ 0.000000] ioremap() called early from pnv_pci_init_ioda_phb+0x38c/0x9a8. Use early_ioremap() instead [ 0.000000] MEM 0x0006028000000000..0x000602bfffffffff -> 0x0006028000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb000) [ 0.000000] OPAL nvram setup, 589824 bytes [ 0.000000] barrier-nospec: using ORI speculation barrier [ 0.000000] barrier-nospec: patched 418 locations [ 0.000000] Top of RAM: 0x2000000000, Total RAM: 0x2000000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000001fffffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000001fffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000001fffffffff] [ 0.000000] On node 0 totalpages: 2097152 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 2097152 pages, LIFO batch:3 [ 0.000000] percpu: Embedded 11 pages/cpu s628760 r0 d92136 u720896 [ 0.000000] pcpu-alloc: s628760 r0 d92136 u720896 alloc=11*65536 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 [ 0.000000] pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2095104 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=f3d03315-0944-4a02-9c87-09c00eba9fa1 ro [ 0.000000] Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 126658560K/134217728K available (17920K kernel code, 3136K rwdata, 8512K rodata, 6528K init, 2221K bss, 841728K reserved, 6717440K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x3c/0x330 with crng_init=0 [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 0.000000] ftrace: allocating 45335 entries in 17 pages [ 0.000000] ftrace: allocated 17 pages with 2 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=32. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] xive: Interrupt handling initialized with native backend [ 0.000000] xive: Using priority 7 for all interrupts [ 0.000000] xive: Using 64kB queues [ 0.000000] time_init: decrementer frequency = 512.000000 MHz [ 0.000000] time_init: processor frequency = 3000.000000 MHz [ 0.000003] time_init: 56 bit decrementer (max: 7fffffffffffff) [ 0.000006] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns [ 0.000012] clocksource: timebase mult[1f40000] shift[24] registered [ 0.000018] clockevent: decrementer mult[83126f] shift[24] cpu[0] [ 0.000305] Console: colour dummy device 80x25 [ 0.000696] printk: console [tty0] enabled [ 0.000831] pid_max: default: 32768 minimum: 301 [ 0.000955] LSM: Security Framework initializing [ 0.001022] Yama: becoming mindful. [ 0.001062] AppArmor: AppArmor initialized [ 0.001170] Mount-cache hash table entries: 131072 (order: 4, 1048576 bytes, linear) [ 0.001215] Mountpoint-cache hash table entries: 131072 (order: 4, 1048576 bytes, linear) [ 0.002085] POWER9 performance monitor hardware support registered [ 0.002128] rcu: Hierarchical SRCU implementation. [ 0.003472] smp: Bringing up secondary CPUs ... [ 0.015366] smp: Brought up 1 node, 32 CPUs [ 0.015376] numa: Node 0 CPUs: 0-31 [ 0.018507] devtmpfs: initialized [ 0.030477] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.030525] futex hash table entries: 8192 (order: 4, 1048576 bytes, linear) [ 0.033269] pinctrl core: initialized pinctrl subsystem [ 0.033644] NET: Registered protocol family 16 [ 0.033810] audit: initializing netlink subsys (disabled) [ 0.033934] audit: type=2000 audit(1616423434.032:1): state=initialized audit_enabled=0 res=1 [ 0.034148] thermal_sys: Registered thermal governor 'fair_share' [ 0.034152] thermal_sys: Registered thermal governor 'bang_bang' [ 0.034159] thermal_sys: Registered thermal governor 'step_wise' [ 0.034164] thermal_sys: Registered thermal governor 'user_space' [ 0.034170] thermal_sys: Registered thermal governor 'power_allocator' [ 0.034387] cpuidle: using governor ladder [ 0.034521] cpuidle: using governor menu [ 0.034656] pstore: Registered nvram as persistent store backend [ 0.035258] EEH: PowerNV platform initialized [ 0.048542] PCI: Probing PCI hardware [ 0.048702] PCI host bridge to bus 0000:00 [ 0.048710] pci_bus 0000:00: root bus resource [mem 0x600c000000000-0x600c07ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.048722] pci_bus 0000:00: root bus resource [mem 0x6000000000000-0x6003fbfffffff 64bit pref] [ 0.048732] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.048740] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.048795] pci 0000:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.048984] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.051752] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000 [ 0.051799] pci 0000:01:00.0: reg 0x10: [mem 0x6000000000000-0x600000fffffff 64bit pref] [ 0.051832] pci 0000:01:00.0: reg 0x18: [mem 0x600c000000000-0x600c00001ffff 64bit] [ 0.051856] pci 0000:01:00.0: reg 0x20: [io 0x0000-0x00ff] [ 0.051894] pci 0000:01:00.0: reg 0x30: [mem 0x600c000020000-0x600c00003ffff pref] [ 0.052031] pci 0000:01:00.0: supports D1 D2 [ 0.052221] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300 [ 0.052267] pci 0000:01:00.1: reg 0x10: [mem 0x600c000040000-0x600c000043fff 64bit] [ 0.052385] pci 0000:01:00.1: BAR0 [mem size 0x00004000 64bit]: requesting alignment to 0x10000 [ 0.052491] pci 0000:01:00.1: supports D1 D2 [ 0.055094] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.055133] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.055270] PCI host bridge to bus 0001:00 [ 0.055276] pci_bus 0001:00: root bus resource [mem 0x600c080000000-0x600c0fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.055287] pci_bus 0001:00: root bus resource [mem 0x6004000000000-0x6007f7fffffff 64bit pref] [ 0.055296] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.055303] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff [ 0.055348] pci 0001:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.055528] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold [ 0.058261] pci 0001:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.058298] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.058328] pci 0001:01:00.0: reg 0x14: [mem 0x600c0800c0000-0x600c0800c3fff 64bit] [ 0.058359] pci 0001:01:00.0: reg 0x1c: [mem 0x600c080080000-0x600c0800bffff 64bit] [ 0.058397] pci 0001:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.058441] pci 0001:01:00.0: BAR1 [mem size 0x00004000 64bit]: requesting alignment to 0x10000 [ 0.058573] pci 0001:01:00.0: supports D1 D2 [ 0.058646] pci 0001:01:00.0: reg 0x174: [mem 0x00000000-0x0000ffff 64bit] [ 0.058654] pci 0001:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 16 VFs) [ 0.058683] pci 0001:01:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.058691] pci 0001:01:00.0: VF(n) BAR2 space: [mem 0x00000000-0x003fffff 64bit] (contains BAR2 for 16 VFs) [ 0.058887] pci 0001:01:00.0: Don't support SR-IOV with non M64 VF BAR0: [mem 0x00000000-0x000fffff 64bit]. [ 0.061441] pci 0001:00:00.0: PCI bridge to [bus 01] [ 0.061479] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.061619] PCI host bridge to bus 0002:00 [ 0.061625] pci_bus 0002:00: root bus resource [mem 0x600c100000000-0x600c17ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.061636] pci_bus 0002:00: root bus resource [mem 0x6008000000000-0x600bf7fffffff 64bit pref] [ 0.061645] pci_bus 0002:00: root bus resource [bus 00-ff] [ 0.061652] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff [ 0.061696] pci 0002:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.061867] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold [ 0.067010] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 0.067048] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff [ 0.067184] PCI host bridge to bus 0003:00 [ 0.067190] pci_bus 0003:00: root bus resource [mem 0x600c180000000-0x600c1fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.067200] pci_bus 0003:00: root bus resource [mem 0x6020000000000-0x6023fbfffffff 64bit pref] [ 0.067209] pci_bus 0003:00: root bus resource [bus 00-ff] [ 0.067217] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to ff [ 0.067260] pci 0003:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.067440] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold [ 0.070167] pci 0003:01:00.0: [104c:8241] type 00 class 0x0c0330 [ 0.070214] pci 0003:01:00.0: reg 0x10: [mem 0x600c180000000-0x600c18000ffff 64bit] [ 0.070247] pci 0003:01:00.0: reg 0x18: [mem 0x600c180010000-0x600c180011fff 64bit] [ 0.070332] pci 0003:01:00.0: BAR2 [mem size 0x00002000 64bit]: requesting alignment to 0x10000 [ 0.070445] pci 0003:01:00.0: supports D1 D2 [ 0.070452] pci 0003:01:00.0: PME# supported from D0 D1 D2 D3hot [ 0.073081] pci 0003:00:00.0: PCI bridge to [bus 01] [ 0.073119] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.073265] PCI host bridge to bus 0004:00 [ 0.073271] pci_bus 0004:00: root bus resource [mem 0x600c200000000-0x600c27ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.073281] pci_bus 0004:00: root bus resource [mem 0x6024000000000-0x6027f7fffffff 64bit pref] [ 0.073291] pci_bus 0004:00: root bus resource [bus 00-ff] [ 0.073298] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to ff [ 0.073342] pci 0004:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.073522] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 0.076255] pci 0004:01:00.0: [14e4:1657] type 00 class 0x020000 [ 0.076302] pci 0004:01:00.0: reg 0x10: [mem 0x6024000000000-0x602400000ffff 64bit pref] [ 0.076339] pci 0004:01:00.0: reg 0x18: [mem 0x6024000010000-0x602400001ffff 64bit pref] [ 0.076372] pci 0004:01:00.0: reg 0x20: [mem 0x6024000020000-0x602400002ffff 64bit pref] [ 0.076586] pci 0004:01:00.0: PME# supported from D0 D3hot D3cold [ 0.076689] pci 0004:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0004:00:00.0 (capable of 16.000 Gb/s with 5.0 GT/s PCIe x4 link) [ 0.076823] pci 0004:01:00.1: [14e4:1657] type 00 class 0x020000 [ 0.076870] pci 0004:01:00.1: reg 0x10: [mem 0x6024000030000-0x602400003ffff 64bit pref] [ 0.076904] pci 0004:01:00.1: reg 0x18: [mem 0x6024000040000-0x602400004ffff 64bit pref] [ 0.076938] pci 0004:01:00.1: reg 0x20: [mem 0x6024000050000-0x602400005ffff 64bit pref] [ 0.077153] pci 0004:01:00.1: PME# supported from D0 D3hot D3cold [ 0.079772] pci 0004:00:00.0: PCI bridge to [bus 01] [ 0.079809] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.079974] PCI host bridge to bus 0005:00 [ 0.079980] pci_bus 0005:00: root bus resource [mem 0x600c280000000-0x600c2fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.079990] pci_bus 0005:00: root bus resource [mem 0x6028000000000-0x602bf7fffffff 64bit pref] [ 0.080000] pci_bus 0005:00: root bus resource [bus 00-ff] [ 0.080007] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to ff [ 0.080051] pci 0005:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.080232] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 0.082973] pci 0005:01:00.0: [1a03:1150] type 01 class 0x060400 [ 0.083214] pci 0005:01:00.0: supports D1 D2 [ 0.083221] pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.085841] pci 0005:00:00.0: PCI bridge to [bus 01-02] [ 0.085941] pci_bus 0005:02: extended config space not accessible [ 0.086002] pci 0005:02:00.0: [1a03:2000] type 00 class 0x030000 [ 0.086041] pci 0005:02:00.0: reg 0x10: [mem 0x600c280000000-0x600c280ffffff] [ 0.086066] pci 0005:02:00.0: reg 0x14: [mem 0x600c281000000-0x600c28101ffff] [ 0.086091] pci 0005:02:00.0: reg 0x18: [io 0x0000-0x007f] [ 0.086241] pci 0005:02:00.0: supports D1 D2 [ 0.086247] pci 0005:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.088820] pci 0005:01:00.0: PCI bridge to [bus 02] [ 0.088878] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to 02 [ 0.088900] pci 0000:00:00.0: BAR 15: assigned [mem 0x6000000000000-0x600001fffffff 64bit pref] [ 0.088910] pci 0000:00:00.0: BAR 14: assigned [mem 0x600c000000000-0x600c0003fffff] [ 0.088920] pci 0000:00:00.0: BAR 13: no space for [io size 0x1000] [ 0.088928] pci 0000:00:00.0: BAR 13: failed to assign [io size 0x1000] [ 0.088938] pci 0000:01:00.0: BAR 0: assigned [mem 0x6000000000000-0x600000fffffff 64bit pref] [ 0.088964] pci 0000:01:00.0: BAR 2: assigned [mem 0x600c000000000-0x600c00001ffff 64bit] [ 0.088988] pci 0000:01:00.0: BAR 6: assigned [mem 0x600c000020000-0x600c00003ffff pref] [ 0.088998] pci 0000:01:00.1: BAR 0: assigned [mem 0x600c000040000-0x600c000043fff 64bit] [ 0.089022] pci 0000:01:00.0: BAR 4: no space for [io size 0x0100] [ 0.089030] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0100] [ 0.089039] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.089052] pci 0000:00:00.0: bridge window [mem 0x600c000000000-0x600c07fefffff] [ 0.089064] pci 0000:00:00.0: bridge window [mem 0x6000000000000-0x6003fbff0ffff 64bit pref] [ 0.089080] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.089088] pci_bus 0000:00: resource 4 [mem 0x600c000000000-0x600c07ffeffff] [ 0.089096] pci_bus 0000:00: resource 5 [mem 0x6000000000000-0x6003fbfffffff 64bit pref] [ 0.089105] pci_bus 0000:01: resource 1 [mem 0x600c000000000-0x600c07fefffff] [ 0.089112] pci_bus 0000:01: resource 2 [mem 0x6000000000000-0x6003fbff0ffff 64bit pref] [ 0.089124] pci 0001:00:00.0: BAR 14: assigned [mem 0x600c080000000-0x600c0807fffff] [ 0.089133] pci 0001:00:00.0: BAR 13: no space for [io size 0x1000] [ 0.089141] pci 0001:00:00.0: BAR 13: failed to assign [io size 0x1000] [ 0.089150] pci 0001:01:00.0: BAR 6: assigned [mem 0x600c080000000-0x600c08007ffff pref] [ 0.089159] pci 0001:01:00.0: BAR 3: assigned [mem 0x600c080080000-0x600c0800bffff 64bit] [ 0.089183] pci 0001:01:00.0: BAR 1: assigned [mem 0x600c0800c0000-0x600c0800c3fff 64bit] [ 0.089207] pci 0001:01:00.0: BAR 0: no space for [io size 0x0100] [ 0.089214] pci 0001:01:00.0: BAR 0: failed to assign [io size 0x0100] [ 0.089223] pci 0001:00:00.0: PCI bridge to [bus 01] [ 0.089235] pci 0001:00:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff] [ 0.089253] pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.089261] pci_bus 0001:00: resource 4 [mem 0x600c080000000-0x600c0fffeffff] [ 0.089269] pci_bus 0001:00: resource 5 [mem 0x6004000000000-0x6007f7fffffff 64bit pref] [ 0.089278] pci_bus 0001:01: resource 1 [mem 0x600c080000000-0x600c0ffefffff] [ 0.089287] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 0.089309] pci_bus 0002:00: resource 4 [mem 0x600c100000000-0x600c17ffeffff] [ 0.089317] pci_bus 0002:00: resource 5 [mem 0x6008000000000-0x600bf7fffffff 64bit pref] [ 0.089328] pci 0003:00:00.0: BAR 14: assigned [mem 0x600c180000000-0x600c1803fffff] [ 0.089339] pci 0003:01:00.0: BAR 0: assigned [mem 0x600c180000000-0x600c18000ffff 64bit] [ 0.089364] pci 0003:01:00.0: BAR 2: assigned [mem 0x600c180010000-0x600c180011fff 64bit] [ 0.089388] pci 0003:00:00.0: PCI bridge to [bus 01] [ 0.089400] pci 0003:00:00.0: bridge window [mem 0x600c180000000-0x600c1ffefffff] [ 0.089418] pci_bus 0003:00: resource 4 [mem 0x600c180000000-0x600c1fffeffff] [ 0.089426] pci_bus 0003:00: resource 5 [mem 0x6020000000000-0x6023fbfffffff 64bit pref] [ 0.089435] pci_bus 0003:01: resource 1 [mem 0x600c180000000-0x600c1ffefffff] [ 0.089446] pci 0004:00:00.0: BAR 15: assigned [mem 0x6024000000000-0x602403fffffff 64bit pref] [ 0.089457] pci 0004:01:00.0: BAR 0: assigned [mem 0x6024000000000-0x602400000ffff 64bit pref] [ 0.089482] pci 0004:01:00.0: BAR 2: assigned [mem 0x6024000010000-0x602400001ffff 64bit pref] [ 0.089507] pci 0004:01:00.0: BAR 4: assigned [mem 0x6024000020000-0x602400002ffff 64bit pref] [ 0.089532] pci 0004:01:00.1: BAR 0: assigned [mem 0x6024000030000-0x602400003ffff 64bit pref] [ 0.089557] pci 0004:01:00.1: BAR 2: assigned [mem 0x6024000040000-0x602400004ffff 64bit pref] [ 0.089582] pci 0004:01:00.1: BAR 4: assigned [mem 0x6024000050000-0x602400005ffff 64bit pref] [ 0.089607] pci 0004:00:00.0: PCI bridge to [bus 01] [ 0.089622] pci 0004:00:00.0: bridge window [mem 0x6024000000000-0x6027f7fffffff 64bit pref] [ 0.089638] pci_bus 0004:00: resource 4 [mem 0x600c200000000-0x600c27ffeffff] [ 0.089646] pci_bus 0004:00: resource 5 [mem 0x6024000000000-0x6027f7fffffff 64bit pref] [ 0.089654] pci_bus 0004:01: resource 2 [mem 0x6024000000000-0x6027f7fffffff 64bit pref] [ 0.089666] pci 0005:00:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2817fffff] [ 0.089675] pci 0005:00:00.0: BAR 13: no space for [io size 0x1000] [ 0.089683] pci 0005:00:00.0: BAR 13: failed to assign [io size 0x1000] [ 0.089691] pci 0005:01:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2817fffff] [ 0.089700] pci 0005:01:00.0: BAR 13: no space for [io size 0x1000] [ 0.089708] pci 0005:01:00.0: BAR 13: failed to assign [io size 0x1000] [ 0.089717] pci 0005:02:00.0: BAR 0: assigned [mem 0x600c280000000-0x600c280ffffff] [ 0.089731] pci 0005:02:00.0: BAR 1: assigned [mem 0x600c281000000-0x600c28101ffff] [ 0.089745] pci 0005:02:00.0: BAR 2: no space for [io size 0x0080] [ 0.089752] pci 0005:02:00.0: BAR 2: failed to assign [io size 0x0080] [ 0.089760] pci 0005:01:00.0: PCI bridge to [bus 02] [ 0.089773] pci 0005:01:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff] [ 0.089792] pci 0005:00:00.0: PCI bridge to [bus 01-02] [ 0.089804] pci 0005:00:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff] [ 0.089823] pci_bus 0005:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.089831] pci_bus 0005:00: resource 4 [mem 0x600c280000000-0x600c2fffeffff] [ 0.089838] pci_bus 0005:00: resource 5 [mem 0x6028000000000-0x602bf7fffffff 64bit pref] [ 0.089847] pci_bus 0005:01: resource 1 [mem 0x600c280000000-0x600c2ffefffff] [ 0.089855] pci_bus 0005:02: resource 1 [mem 0x600c280000000-0x600c2ffefffff] [ 0.089864] pci_bus 0000:00: Configuring PE for bus [ 0.089872] pci 0000:00 : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe [ 0.090096] pci 0000:00:00.0: Configured PE#1fe [ 0.090144] pci_bus 0000:01: Configuring PE for bus [ 0.090155] pci 0000:01 : [PE# 00] Secondary bus 0x0000000000000001 associated with PE#0 [ 0.090380] pci 0000:01:00.0: Configured PE#0 [ 0.090386] pci 0000:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 [ 0.091282] IOMMU table initialized, virtual merging enabled [ 0.091288] pci 0000:01 : [PE# 00] Setting up window#0 0..1fffffffff pg=10000 [ 0.091303] pci 0000:01 : [PE# 00] Enabling 64-bit DMA bypass [ 0.091323] pci 0000:01:00.0: Adding to iommu group 0 [ 0.091417] pci 0000:01:00.1: Added to existing PE#0 [ 0.091427] pci 0000:01:00.1: Adding to iommu group 0 [ 0.091515] pci_bus 0001:00: Configuring PE for bus [ 0.091521] pci 0001:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe [ 0.091742] pci 0001:00:00.0: Configured PE#fe [ 0.091785] pci_bus 0001:01: Configuring PE for bus [ 0.091794] pci 0001:01 : [PE# fd] Secondary bus 0x0000000000000001 associated with PE#fd [ 0.092018] pci 0001:01:00.0: Configured PE#fd [ 0.092024] pci 0001:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 [ 0.092920] pci 0001:01 : [PE# fd] Setting up window#0 0..1fffffffff pg=10000 [ 0.092933] pci 0001:01 : [PE# fd] Enabling 64-bit DMA bypass [ 0.092952] pci 0001:01:00.0: Adding to iommu group 1 [ 0.093043] pci_bus 0002:00: Configuring PE for bus [ 0.093050] pci 0002:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe [ 0.093270] pci 0002:00:00.0: Configured PE#fe [ 0.093313] pci_bus 0003:00: Configuring PE for bus [ 0.093320] pci 0003:00 : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe [ 0.093540] pci 0003:00:00.0: Configured PE#1fe [ 0.093583] pci_bus 0003:01: Configuring PE for bus [ 0.093592] pci 0003:01 : [PE# 1fd] Secondary bus 0x0000000000000001 associated with PE#1fd [ 0.093815] pci 0003:01:00.0: Configured PE#1fd [ 0.093821] pci 0003:01 : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000 [ 0.094717] pci 0003:01 : [PE# 1fd] Setting up window#0 0..1fffffffff pg=10000 [ 0.094730] pci 0003:01 : [PE# 1fd] Enabling 64-bit DMA bypass [ 0.094748] pci 0003:01:00.0: Adding to iommu group 2 [ 0.094845] pci_bus 0004:00: Configuring PE for bus [ 0.094852] pci 0004:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe [ 0.095072] pci 0004:00:00.0: Configured PE#fe [ 0.095115] pci_bus 0004:01: Configuring PE for bus [ 0.095133] pci 0004:01 : [PE# 00] Secondary bus 0x0000000000000001 associated with PE#0 [ 0.095354] pci 0004:01:00.0: Configured PE#0 [ 0.095360] pci 0004:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 [ 0.096253] pci 0004:01 : [PE# 00] Setting up window#0 0..1fffffffff pg=10000 [ 0.096265] pci 0004:01 : [PE# 00] Enabling 64-bit DMA bypass [ 0.096284] pci 0004:01:00.0: Adding to iommu group 3 [ 0.096395] pci 0004:01:00.1: Added to existing PE#0 [ 0.096404] pci 0004:01:00.1: Adding to iommu group 3 [ 0.096516] pci_bus 0005:00: Configuring PE for bus [ 0.096522] pci 0005:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe [ 0.096743] pci 0005:00:00.0: Configured PE#fe [ 0.096786] pci_bus 0005:01: Configuring PE for bus [ 0.096795] pci 0005:01 : [PE# fd] Secondary bus 0x0000000000000001 associated with PE#fd [ 0.097016] pci 0005:01:00.0: Configured PE#fd [ 0.097111] pci_bus 0005:02: Configuring PE for bus [ 0.097119] pci 0005:02 : [PE# fc] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fc [ 0.097343] pci 0005:02:00.0: Configured PE#fc [ 0.097349] pci 0005:02 : [PE# fc] Setting up 32-bit TCE table at 0..80000000 [ 0.098242] pci 0005:02 : [PE# fc] Setting up window#0 0..1fffffffff pg=10000 [ 0.098254] pci 0005:02 : [PE# fc] Enabling 64-bit DMA bypass [ 0.098272] pci 0005:02:00.0: Adding to iommu group 4 [ 0.098401] pci 0000:00:00.0: enabling device (0101 -> 0103) [ 0.098420] pci 0001:00:00.0: enabling device (0101 -> 0103) [ 0.098439] pci 0003:00:00.0: enabling device (0101 -> 0103) [ 0.098458] pci 0004:00:00.0: enabling device (0101 -> 0103) [ 0.098476] pci 0005:00:00.0: enabling device (0101 -> 0103) [ 0.098496] pci 0005:01:00.0: enabling device (0141 -> 0143) [ 0.098514] EEH: Capable adapter found: recovery enabled. [ 0.098586] PCI: Probing PCI hardware done [ 0.103518] cpuidle-powernv: Default stop: psscr = 0x0000000000000330,mask=0x00000000003003ff [ 0.103526] cpuidle-powernv: Deepest stop: psscr = 0x0000000000300375,mask=0x00000000003003ff [ 0.103532] cpuidle-powernv: First stop level that may lose SPRs = 0x4 [ 0.103536] cpuidle-powernv: First stop level that may lose timebase = 0x10 [ 0.106509] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.106516] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.108913] fbcon: Taking over console [ 0.109174] iommu: Default domain type: Translated [ 0.109514] SCSI subsystem initialized [ 0.109571] libata version 3.00 loaded. [ 0.109641] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.109657] pci 0005:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.109665] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.109670] pci 0005:02:00.0: vgaarb: bridge control possible [ 0.109678] pci 0005:02:00.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 0.109685] vgaarb: loaded [ 0.109736] usbcore: registered new interface driver usbfs [ 0.109753] usbcore: registered new interface driver hub [ 0.109774] usbcore: registered new device driver usb [ 0.109817] pps_core: LinuxPPS API ver. 1 registered [ 0.109821] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.109831] PTP clock support registered [ 0.109908] EDAC MC: Ver: 3.0.0 [ 0.110305] NetLabel: Initializing [ 0.110310] NetLabel: domain hash size = 128 [ 0.110314] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.110340] NetLabel: unlabeled traffic allowed by default [ 0.110509] clocksource: Switched to clocksource timebase [ 0.130950] VFS: Disk quotas dquot_6.6.0 [ 0.130991] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 0.131213] AppArmor: AppArmor Filesystem Enabled [ 0.133746] NET: Registered protocol family 2 [ 0.137844] tcp_listen_portaddr_hash hash table entries: 65536 (order: 4, 1048576 bytes, linear) [ 0.138232] TCP established hash table entries: 524288 (order: 6, 4194304 bytes, linear) [ 0.139359] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes, linear) [ 0.139598] TCP: Hash tables configured (established 524288 bind 65536) [ 0.139782] MPTCP token hash table entries: 65536 (order: 4, 1572864 bytes, linear) [ 0.140090] UDP hash table entries: 65536 (order: 5, 2097152 bytes, linear) [ 0.140645] UDP-Lite hash table entries: 65536 (order: 5, 2097152 bytes, linear) [ 0.141236] NET: Registered protocol family 1 [ 0.141248] NET: Registered protocol family 44 [ 0.141293] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.141326] pci 0003:01:00.0: enabling device (0140 -> 0142) [ 0.141439] PCI: CLS 0 bytes, default 128 [ 0.141505] Trying to unpack rootfs image as initramfs... [ 0.508931] Freeing initrd memory: 106240K [ 0.518174] Initialise system trusted keyrings [ 0.518202] Key type blacklist registered [ 0.518250] workingset: timestamp_bits=38 max_order=21 bucket_order=0 [ 0.520498] zbud: loaded [ 0.521481] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.521796] fuse: init (API version 7.33) [ 0.521995] integrity: Platform Keyring initialized [ 0.549460] Key type asymmetric registered [ 0.549465] Asymmetric key parser 'x509' registered [ 0.549479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.549541] io scheduler mq-deadline registered [ 0.550487] Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized. [ 0.550517] hvc0: raw protocol on /ibm,opal/consoles/serial@0 [ 0.550543] hvc0: No interrupts property, using OPAL event [ 0.550882] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.553638] Non-volatile memory driver v1.3 [ 0.553675] Linux agpgart interface v0.103 [ 0.553712] Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized. [ 0.560179] loop: module loaded [ 0.560607] libphy: Fixed MDIO Bus: probed [ 0.560613] tun: Universal TUN/TAP device driver, 1.6 [ 0.560671] PPP generic driver version 2.4.2 [ 0.560750] VFIO - User Level meta-driver version: 0.3 [ 0.560855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.560875] ehci-pci: EHCI PCI platform driver [ 0.560892] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560899] ohci-pci: OHCI PCI platform driver [ 0.560914] uhci_hcd: USB Universal Host Controller Interface driver [ 0.561305] mousedev: PS/2 mouse device common for all mice [ 0.578559] rtc-opal opal-rtc: registered as rtc0 [ 0.598532] rtc-opal opal-rtc: setting system clock to 2021-03-22T14:30:34 UTC (1616423434) [ 0.598556] i2c /dev entries driver [ 0.599699] device-mapper: uevent: version 1.0.3 [ 0.599777] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 0.599800] powernv-cpufreq: cpufreq pstate min 0x62 nominal 0x30 max 0x0 [ 0.599805] powernv-cpufreq: Workload Optimized Frequency is enabled in the platform [ 0.602595] powernv_idle_driver registered [ 0.602936] ledtrig-cpu: registered to indicate activity on CPUs [ 0.603197] drop_monitor: Initializing network drop monitor service [ 0.603392] NET: Registered protocol family 10 [ 0.612533] Segment Routing with IPv6 [ 0.612568] NET: Registered protocol family 17 [ 0.612619] Key type dns_resolver registered [ 0.612644] secvar-sysfs: secvar: failed to retrieve secvar operations. [ 0.612656] drmem: No dynamic reconfiguration memory found [ 0.612757] registered taskstats version 1 [ 0.612779] Loading compiled-in X.509 certificates [ 0.614329] Loaded X.509 cert 'Build time autogenerated kernel key: 683b02ba676b75e95b5294d16aec1ae904ebcf76' [ 0.615683] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.617032] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.617987] zswap: loaded using pool lzo/zbud [ 0.618172] Key type ._fscrypt registered [ 0.618178] Key type .fscrypt registered [ 0.618183] Key type fscrypt-provisioning registered [ 0.618272] pstore: Using crash dump compression: deflate [ 0.621411] Key type encrypted registered [ 0.621417] AppArmor: AppArmor sha1 policy hashing enabled [ 0.621491] Secure boot mode disabled [ 0.621497] ima: No TPM chip found, activating TPM-bypass! [ 0.621504] ima: Allocated hash algorithm: sha256 [ 0.621588] Secure boot mode disabled [ 0.621652] Trusted boot mode disabled [ 0.621656] ima: No architecture policies found [ 0.621672] evm: Initialising EVM extended attributes: [ 0.621676] evm: security.selinux [ 0.621679] evm: security.SMACK64 [ 0.621682] evm: security.SMACK64EXEC [ 0.621686] evm: security.SMACK64TRANSMUTE [ 0.621689] evm: security.SMACK64MMAP [ 0.621692] evm: security.apparmor [ 0.621695] evm: security.ima [ 0.621698] evm: security.capability [ 0.621701] evm: HMAC attrs: 0x1 [ 0.622268] integrity: Unable to open file: /etc/keys/x509_ima.der (-2) [ 0.622273] integrity: Unable to open file: /etc/keys/x509_evm.der (-2) [ 0.624375] Freeing unused kernel memory: 6528K [ 0.624383] This architecture does not have kernel memory protection. [ 0.624391] Run /init as init process [ 0.624395] with arguments: [ 0.624396] /init [ 0.624398] with environment: [ 0.624400] HOME=/ [ 0.624402] TERM=linux [ 0.725598] tg3 0004:01:00.0: enabling device (0140 -> 0142) [ 0.727711] xhci_hcd 0003:01:00.0: xHCI Host Controller [ 0.727732] xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 1 [ 0.727891] xhci_hcd 0003:01:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x0000000004000000 [ 0.728448] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11 [ 0.728458] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.728468] usb usb1: Product: xHCI Host Controller [ 0.728474] usb usb1: Manufacturer: Linux 5.11.0-11-generic xhci-hcd [ 0.728481] usb usb1: SerialNumber: 0003:01:00.0 [ 0.728683] hub 1-0:1.0: USB hub found [ 0.728705] hub 1-0:1.0: 4 ports detected [ 0.729035] xhci_hcd 0003:01:00.0: xHCI Host Controller [ 0.729044] xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 2 [ 0.729055] xhci_hcd 0003:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.729101] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.729161] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11 [ 0.729172] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.729179] usb usb2: Product: xHCI Host Controller [ 0.729185] usb usb2: Manufacturer: Linux 5.11.0-11-generic xhci-hcd [ 0.729191] usb usb2: SerialNumber: 0003:01:00.0 [ 0.729359] hub 2-0:1.0: USB hub found [ 0.729379] hub 2-0:1.0: 4 ports detected [ 0.743486] mpt3sas version 36.100.00.00 loaded [ 0.743772] mpt3sas 0001:01:00.0: enabling device (0140 -> 0142) [ 0.743795] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (133554688 kB) [ 0.744739] tg3 0004:01:00.0 eth0: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:06:e8 [ 0.744748] tg3 0004:01:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.744755] tg3 0004:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.744761] tg3 0004:01:00.0 eth0: dma_rwctrl[00000000] dma_mask[64-bit] [ 0.744897] tg3 0004:01:00.1: enabling device (0140 -> 0142) [ 0.759629] ast 0005:02:00.0: enabling device (0141 -> 0143) [ 0.759669] ast 0005:02:00.0: [drm] platform has no IO space, trying MMIO [ 0.759676] ast 0005:02:00.0: [drm] Using device-tree for configuration [ 0.759681] ast 0005:02:00.0: [drm] AST 2500 detected [ 0.759688] ast 0005:02:00.0: [drm] Analog VGA only [ 0.759692] ast 0005:02:00.0: [drm] dram MCLK=800 Mhz type=7 bus_width=16 [ 0.759783] [TTM] Zone kernel: Available graphics memory: 66777344 KiB [ 0.759788] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 0.760577] [drm] Initialized ast 0.1.0 20120228 for 0005:02:00.0 on minor 0 [ 0.789656] [drm] radeon kernel modesetting enabled. [ 0.872369] Console: switching to colour frame buffer device 240x67 [ 0.877382] ast 0005:02:00.0: [drm] fb0: astdrmfb frame buffer device [ 0.877441] radeon 0000:01:00.0: enabling device (0140 -> 0142) [ 0.909338] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1787:0x2291 0x00). [ 0.909386] [drm:radeon_device_init [radeon]] *ERROR* Unable to find PCI I/O BAR [ 1.068026] [drm:radeon_atombios_init [radeon]] *ERROR* Unable to find PCI I/O BAR; using MMIO for ATOM IIO [ 1.068102] ATOM BIOS: CEARD [ 1.068196] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 1.068221] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 1.068242] [drm] Detected VRAM RAM=1024M, BAR=256M [ 1.068256] [drm] RAM width 64bits DDR [ 1.068295] [drm] radeon: 1024M of VRAM memory ready [ 1.068308] [drm] radeon: 1024M of GTT memory ready. [ 1.068348] [drm] Loading CEDAR Microcode [ 1.068472] [drm] Internal thermal controller with fan control [ 1.071068] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.071569] [drm] radeon: dpm initialized [ 1.071648] [drm] GART: num cpu pages 16384, num gpu pages 262144 [ 1.091503] [drm] PCIE GART of 1024M enabled (table at 0x0000000000150000). [ 1.091660] radeon 0000:01:00.0: WB enabled [ 1.091672] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 1.091695] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 1.092211] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [ 1.098508] tg3 0004:01:00.1 eth1: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:06:e9 [ 1.098562] tg3 0004:01:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.098609] tg3 0004:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 1.098648] tg3 0004:01:00.1 eth1: dma_rwctrl[00000000] dma_mask[64-bit] [ 1.099952] tg3 0004:01:00.1 enP4p1s0f1: renamed from eth1 [ 1.100259] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 1.100366] radeon 0000:01:00.0: radeon: using MSI. [ 1.100428] [drm] radeon: irq initialized. [ 1.116901] [drm] ring test on 0 succeeded in 1 usecs [ 1.116924] [drm] ring test on 3 succeeded in 6 usecs [ 1.236012] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 1.236054] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.236088] usb 1-2: Product: 4-Port USB 2.0 Hub [ 1.236111] usb 1-2: Manufacturer: Generic [ 1.250817] hub 1-2:1.0: USB hub found [ 1.252387] hub 1-2:1.0: 4 ports detected [ 1.294023] [drm] ring test on 5 succeeded in 2 usecs [ 1.294045] [drm] UVD initialized successfully. [ 1.294215] [drm] ib test on ring 0 succeeded in 0 usecs [ 1.294278] [drm] ib test on ring 3 succeeded in 0 usecs [ 1.302965] tg3 0004:01:00.0 enP4p1s0f0: renamed from eth0 [ 1.355090] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1.392646] usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 1.394002] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.395355] usb 2-2: Product: 4-Port USB 3.0 Hub [ 1.396686] usb 2-2: Manufacturer: Generic [ 1.412909] hub 2-2:1.0: USB hub found [ 1.415643] hub 2-2:1.0: 4 ports detected [ 1.489542] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.490306] mpt2sas_cm0: MSI-X vectors supported: 1 [ 1.491661] no of cores: 32, max_msix_vectors: -1 [ 1.492442] mpt2sas_cm0: 0 1 [ 1.493220] mpt2sas_cm0: High IOPs queues : disabled [ 1.493933] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 24 [ 1.494660] mpt2sas_cm0: iomem(0x000600c0800c0000), mapped(0x(____ptrval____)), size(16384) [ 1.495400] mpt2sas_cm0: ioport(0x0000000000000000), size(0) [ 1.515062] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 1.608611] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.665177] mpt2sas_cm0: scatter gather: sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128), chains_per_io(15) [ 1.666746] mpt2sas_cm0: request pool(0x(____ptrval____)) - dma(0x800000039e80000): depth(3544), frame_size(128), pool_size(443 kB) [ 1.670903] usb 1-3: New USB device found, idVendor=1d6b, idProduct=0107, bcdDevice= 1.00 [ 1.672297] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.673271] mpt2sas_cm0: sense pool(0x(____ptrval____))- dma(0x80000003a680000): depth(3331),element_size(96), pool_size(312 kB) [ 1.673678] usb 1-3: Product: USB Virtual Hub [ 1.675193] mpt2sas_cm0: config page(0x(____ptrval____)) - dma(0x80000003a790000): size(512) [ 1.676499] usb 1-3: Manufacturer: Aspeed [ 1.677921] mpt2sas_cm0: Allocated physical memory: size(2533 kB) [ 1.679348] usb 1-3: SerialNumber: 00000000 [ 1.680761] mpt2sas_cm0: Current Controller Queue Depth(3328),Max Controller Queue Depth(3440) [ 1.683694] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 1.699696] hub 1-3:1.0: USB hub found [ 1.702290] hub 1-3:1.0: 5 ports detected [ 1.746516] usb 1-2.1: new low-speed USB device number 4 using xhci_hcd [ 1.788331] mpt2sas_cm0: LSISAS2008: FWVersion(10.00.08.00), ChipRevision(0x03), BiosVersion(07.19.00.00) [ 1.789292] mpt2sas_cm0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) [ 1.822117] scsi host0: Fusion MPT SAS Host [ 1.853797] mpt2sas_cm0: sending port enable !! [ 1.856258] mpt2sas_cm0: hba_port entry: (____ptrval____), port: 255 is added to hba_port list [ 1.859800] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x500605b00551a1c0), phys(8) [ 1.878561] mpt2sas_cm0: port enable: SUCCESS [ 1.881214] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653G LW02 PQ: 0 ANSI: 0 [ 1.882937] scsi 0:0:0:0: SATA: handle(0x000b), sas_addr(0x4433221107000000), phy(7), device_name(0x0000000000000000) [ 1.884453] scsi 0:0:0:0: enclosure logical id (0x500605b00551a1c0), slot(0) [ 1.886097] scsi 0:0:0:0: atapi(y), ncq(n), asyn_notify(n), smart(n), fua(n), sw_preserve(n) [ 1.887161] scsi 0:0:0:0: qdepth(1), tagged(0), scsi_level(0), cmd_que(0) [ 1.888216] end_device-0:0: add: handle(0x000b), sas_addr(0x4433221107000000) [ 1.892050] scsi 0:0:1:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 6 [ 1.893137] scsi 0:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221102000000), phy(2), device_name(0x50025388a03f461d) [ 1.894223] scsi 0:0:1:0: enclosure logical id (0x500605b00551a1c0), slot(1) [ 1.894301] usb 1-2.1: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00 [ 1.895451] scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 1.895455] random: fast init done [ 1.896894] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.897994] scsi 0:0:1:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 1.899536] usb 1-2.1: Product: USB OPTICAL MOUSE [ 1.901594] end_device-0:1: add: handle(0x0009), sas_addr(0x4433221102000000) [ 1.905786] scsi 0:0:2:0: Direct-Access ATA WDC WD5000LPCX-0 1A01 PQ: 0 ANSI: 6 [ 1.906739] scsi 0:0:2:0: SATA: handle(0x000c), sas_addr(0x4433221104000000), phy(4), device_name(0x50014ee65e2df24e) [ 1.907689] scsi 0:0:2:0: enclosure logical id (0x500605b00551a1c0), slot(3) [ 1.908753] scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 1.909718] scsi 0:0:2:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 1.914781] end_device-0:2: add: handle(0x000c), sas_addr(0x4433221104000000) [ 1.916509] scsi 0:0:3:0: Direct-Access ATA KINGSTON SA400S3 J4.3 PQ: 0 ANSI: 6 [ 1.917932] scsi 0:0:3:0: SATA: handle(0x000a), sas_addr(0x4433221106000000), phy(6), device_name(0x50026b76841c5301) [ 1.919141] scsi 0:0:3:0: enclosure logical id (0x500605b00551a1c0), slot(1) [ 1.920587] scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 1.921916] scsi 0:0:3:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 1.923772] end_device-0:3: add: handle(0x000a), sas_addr(0x4433221106000000) [ 1.927428] sr 0:0:0:0: [sr0] scsi-1 drive [ 1.928567] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.019808] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.020131] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.023397] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 2.026330] scsi 0:0:2:0: Attached scsi generic sg2 type 0 [ 2.028137] sd 0:0:1:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.028324] scsi 0:0:3:0: Attached scsi generic sg3 type 0 [ 2.028504] sd 0:0:2:0: [sdb] physical block alignment offset: 4096 [ 2.030264] sd 0:0:3:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.030353] sd 0:0:3:0: [sdc] Write Protect is off [ 2.030356] sd 0:0:3:0: [sdc] Mode Sense: 7f 00 00 08 [ 2.030523] sd 0:0:3:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.031497] sd 0:0:2:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.034820] sd 0:0:1:0: [sda] Write Protect is off [ 2.042523] usb 1-4: new high-speed USB device number 5 using xhci_hcd [ 2.052376] sd 0:0:2:0: [sdb] 4096-byte physical blocks [ 2.053380] sd 0:0:1:0: [sda] Mode Sense: 7f 00 00 08 [ 2.053709] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.100115] sd 0:0:2:0: [sdb] Write Protect is off [ 2.115224] sd 0:0:2:0: [sdb] Mode Sense: 7f 00 00 08 [ 2.116687] sd 0:0:2:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.180030] sdc: sdc1 [ 2.183863] sd 0:0:3:0: [sdc] Attached SCSI disk [ 2.197425] sda: sda1 sda2 [ 2.202447] usb 1-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.204126] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.205141] sd 0:0:1:0: [sda] Attached SCSI disk [ 2.205692] usb 1-4: Product: USB2.0 Hub [ 2.217851] hub 1-4:1.0: USB hub found [ 2.219814] hub 1-4:1.0: 4 ports detected [ 2.264937] sdb: sdb1 sdb2 [ 2.282533] usb 1-2.2: new full-speed USB device number 6 using xhci_hcd [ 2.286298] sd 0:0:2:0: [sdb] Attached SCSI disk [ 2.398755] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.00 [ 2.400358] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.401930] usb 1-2.2: Product: G513 Carbon Tactile [ 2.403510] usb 1-2.2: Manufacturer: Logitech [ 2.405026] usb 1-2.2: SerialNumber: 0A7837503930 [ 2.462554] [drm:uvd_v1_0_ib_test [radeon]] *ERROR* radeon: fence wait timed out. [ 2.464301] [drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed testing IB on ring 5 (-110). [ 2.494553] usb 1-3.1: new high-speed USB device number 7 using xhci_hcd [ 2.542673] [drm] Radeon Display Connectors [ 2.543775] [drm] Connector 0: [ 2.544688] [drm] HDMI-A-1 [ 2.545587] [drm] HPD2 [ 2.546472] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 2.547396] [drm] Encoders: [ 2.548281] [drm] DFP1: INTERNAL_UNIPHY1 [ 2.549218] [drm] Connector 1: [ 2.550084] [drm] DVI-I-1 [ 2.550942] [drm] HPD4 [ 2.551780] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 2.552627] [drm] Encoders: [ 2.553461] [drm] DFP2: INTERNAL_UNIPHY [ 2.554299] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.555120] [drm] Connector 2: [ 2.555929] [drm] VGA-2 [ 2.556729] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 2.557536] [drm] Encoders: [ 2.558329] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 2.609184] usb 1-3.1: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 1.00 [ 2.611658] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.614122] usb 1-3.1: Product: virtual_input [ 2.616555] usb 1-3.1: Manufacturer: OpenBMC [ 2.618960] usb 1-3.1: SerialNumber: OBMC0001 [ 2.682529] usb 1-4.1: new full-speed USB device number 8 using xhci_hcd [ 2.713129] hid: raw HID events driver (C) Jiri Kosina [ 2.737516] usbcore: registered new interface driver usbhid [ 2.740054] usbhid: USB HID core driver [ 2.746223] [drm] fb mappable at 0x6000000360000 [ 2.747503] [drm] vram apper at 0x6000000000000 [ 2.748791] [drm] size 8323072 [ 2.750885] [drm] fb depth is 24 [ 2.753181] [drm] pitch is 7680 [ 2.753919] input: USB OPTICAL MOUSE as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:093A:2521.0001/input/input0 [ 2.756321] radeon 0000:01:00.0: [drm] fb1: radeondrmfb frame buffer device [ 2.756443] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0003:01:00.0-2.1/input0 [ 2.757791] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1 [ 2.759262] input: Logitech G513 Carbon Tactile as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C33C.0002/input/input1 [ 2.818626] hid-generic 0003:046D:C33C.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0003:01:00.0-2.2/input0 [ 2.820481] input: Logitech G513 Carbon Tactile Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C33C.0003/input/input2 [ 2.879118] input: Logitech G513 Carbon Tactile Consumer Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C33C.0003/input/input3 [ 2.880879] hid-generic 0003:046D:C33C.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0003:01:00.0-2.2/input1 [ 2.882776] input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:1D6B:0104.0004/input/input6 [ 2.942611] hid-generic 0003:1D6B:0104.0004: input,hidraw3: USB HID v1.01 Keyboard [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input0 [ 2.943989] input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:1D6B:0104.0005/input/input7 [ 2.945331] hid-generic 0003:1D6B:0104.0005: input,hidraw4: USB HID v1.01 Mouse [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input1 [ 3.047184] usb 1-4.1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 3.048809] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.050402] usb 1-4.1: Product: USB Receiver [ 3.052017] usb 1-4.1: Manufacturer: Logitech [ 3.110524] usb 1-2.3: new full-speed USB device number 9 using xhci_hcd [ 3.115287] input: Logitech USB Receiver as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:046D:C534.0006/input/input8 [ 3.175836] hid-generic 0003:046D:C534.0006: input,hidraw5: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0003:01:00.0-4.1/input0 [ 3.214641] input: Logitech USB Receiver Mouse as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0007/input/input9 [ 3.246198] input: Logitech USB Receiver Consumer Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0007/input/input10 [ 3.305952] usb 1-2.3: New USB device found, idVendor=0ccd, idProduct=00b1, bcdDevice= 0.10 [ 3.306917] input: Logitech USB Receiver System Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0007/input/input11 [ 3.307899] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.309067] hid-generic 0003:046D:C534.0007: input,hiddev1,hidraw6: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0003:01:00.0-4.1/input1 [ 3.310957] usb 1-2.3: Product: Aureon 7.1 USB [ 3.367916] input: Aureon 7.1 USB as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.3/1-2.3:1.3/0003:0CCD:00B1.0008/input/input14 [ 3.427625] logitech-djreceiver 0003:046D:C534.0006: hidraw5: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0003:01:00.0-4.1/input0 [ 3.467184] hid-generic 0003:0CCD:00B1.0008: input,hidraw7: USB HID v1.00 Device [Aureon 7.1 USB] on usb-0003:01:00.0-2.3/input3 [ 3.623134] logitech-djreceiver 0003:046D:C534.0007: hiddev1,hidraw6: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0003:01:00.0-4.1/input1 [ 3.688579] logitech-djreceiver 0003:046D:C534.0007: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 3.692025] logitech-djreceiver 0003:046D:C534.0007: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 3.722538] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0007/0003:046D:4023.0009/input/input15 [ 3.754115] input: Logitech Wireless Keyboard PID:4023 Consumer Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0007/0003:046D:4023.0009/input/input16 [ 3.754852] input: Logitech Wireless Keyboard PID:4023 System Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0007/0003:046D:4023.0009/input/input17 [ 3.754960] hid-generic 0003:046D:4023.0009: input,hidraw8: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0003:01:00.0-4.1/input1:1 [ 3.762083] input: Logitech Wireless Mouse as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0007/0003:046D:4054.000A/input/input22 [ 3.906507] raid6: vpermxor8 gen() 14607 MB/s [ 3.974504] raid6: vpermxor4 gen() 12580 MB/s [ 4.042529] raid6: vpermxor2 gen() 9925 MB/s [ 4.110512] raid6: vpermxor1 gen() 8097 MB/s [ 4.178523] raid6: altivecx8 gen() 9216 MB/s [ 4.246535] raid6: altivecx4 gen() 8613 MB/s [ 4.314535] raid6: altivecx2 gen() 7089 MB/s [ 4.382542] raid6: altivecx1 gen() 5525 MB/s [ 4.450515] raid6: int64x8 gen() 4974 MB/s [ 4.518537] raid6: int64x8 xor() 2956 MB/s [ 4.586547] raid6: int64x4 gen() 5648 MB/s [ 4.654517] raid6: int64x4 xor() 2762 MB/s [ 4.722504] raid6: int64x2 gen() 4130 MB/s [ 4.790562] raid6: int64x2 xor() 2065 MB/s [ 4.858561] raid6: int64x1 gen() 3257 MB/s [ 4.926592] raid6: int64x1 xor() 1669 MB/s [ 4.928466] raid6: using algorithm vpermxor8 gen() 14607 MB/s [ 4.930343] raid6: using intx1 recovery algorithm [ 4.939379] xor: measuring software checksum speed [ 4.963688] 8regs : 1428 MB/sec [ 4.989216] 8regs_prefetch : 1231 MB/sec [ 5.013286] 32regs : 1446 MB/sec [ 5.038409] 32regs_prefetch : 1255 MB/sec [ 5.060919] altivec : 1819 MB/sec [ 5.077984] xor: using function: altivec (1819 MB/sec) [ 5.102122] async_tx: api initialized (async) [ 5.245065] Btrfs loaded, crc32c=crc32c-vpmsum, zoned=yes [ 5.354823] logitech-hidpp-device 0003:046D:4054.000A: input,hidraw9: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0003:01:00.0-4.1/input1:2 [ 5.396587] BTRFS: device fsid fd3ba80e-dbd6-4f47-9121-7024c9cc07ca devid 1 transid 5177 /dev/sdc1 scanned by btrfs (563) [ 5.484866] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:046D:C534.0007/0003:046D:4023.0009/input/input23 [ 5.487553] logitech-hidpp-device 0003:046D:4023.0009: input,hidraw8: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0003:01:00.0-4.1/input1:1 [ 5.488345] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 7.001666] systemd[1]: Inserted module 'autofs4' [ 7.261854] random: crng init done [ 7.310047] systemd[1]: systemd 247.3-1ubuntu4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.327663] systemd[1]: Detected architecture ppc64-le. [ 7.475053] systemd[1]: Set hostname to . [ 8.017602] systemd-sysv-generator[637]: SysV service '/etc/init.d/hddtemp' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.054845] systemd-sysv-generator[637]: SysV service '/etc/init.d/apport' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 9.739941] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 9.827511] systemd[1]: /lib/systemd/system/rtas_errd.service:12: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 9.830562] systemd[1]: /lib/systemd/system/rtas_errd.service:13: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 9.868143] systemd[1]: /lib/systemd/system/opal_errd.service:10: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 9.870179] systemd[1]: /lib/systemd/system/opal_errd.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 10.095796] systemd[1]: Queued start job for default target Graphical Interface. [ 10.163294] systemd[1]: Created slice system-modprobe.slice. [ 10.191488] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 10.230872] systemd[1]: Created slice User and Session Slice. [ 10.265953] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.302440] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.339039] systemd[1]: Reached target User and Group Name Lookups. [ 10.375401] systemd[1]: Reached target Slices. [ 10.412846] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 10.451222] systemd[1]: Listening on LVM2 poll daemon socket. [ 10.489502] systemd[1]: Listening on multipathd control socket. [ 10.528919] systemd[1]: Listening on Syslog Socket. [ 10.568249] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.609601] systemd[1]: Listening on Journal Audit Socket. [ 10.649658] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.690702] systemd[1]: Listening on Journal Socket. [ 10.732272] systemd[1]: Listening on Network Service Netlink Socket. [ 10.814569] systemd[1]: Listening on udev Control Socket. [ 10.841762] systemd[1]: Listening on udev Kernel Socket. [ 10.866033] systemd[1]: Mounting Huge Pages File System... [ 10.871598] systemd[1]: Mounting POSIX Message Queue File System... [ 10.875137] systemd[1]: Mounting Kernel Debug File System... [ 10.878581] systemd[1]: Mounting Kernel Trace File System... [ 10.882533] systemd[1]: Starting Journal Service... [ 10.895092] systemd[1]: Starting Set the console keyboard layout... [ 10.898736] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 10.902074] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 10.905302] systemd[1]: Starting Load Kernel Module configfs... [ 10.908553] systemd[1]: Starting Load Kernel Module drm... [ 10.911682] systemd[1]: Starting Load Kernel Module fuse... [ 10.914124] systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped. [ 10.942875] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 10.956466] systemd[1]: Starting Load Kernel Modules... [ 10.960702] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.964533] systemd[1]: Starting Coldplug All udev Devices... [ 10.968311] systemd[1]: Starting Uncomplicated firewall... [ 10.972034] systemd[1]: Mounted Huge Pages File System. [ 10.974168] systemd[1]: Mounted POSIX Message Queue File System. [ 10.976290] systemd[1]: Mounted Kernel Debug File System. [ 10.978387] systemd[1]: Mounted Kernel Trace File System. [ 10.981072] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 11.100266] systemd[1]: modprobe@configfs.service: Succeeded. [ 11.108402] systemd[1]: Finished Load Kernel Module configfs. [ 11.143534] systemd[1]: modprobe@drm.service: Succeeded. [ 11.163162] systemd[1]: Finished Load Kernel Module drm. [ 11.195499] systemd[1]: modprobe@fuse.service: Succeeded. [ 11.213544] systemd[1]: Finished Load Kernel Module fuse. [ 11.243721] systemd[1]: Started Journal Service. [ 11.246735] lp: driver loaded but no devices found [ 11.261099] ppdev: user-space parallel port driver [ 11.324260] EXT4-fs (sdb2): re-mounted. Opts: (null). Quota mode: none. [ 11.501552] systemd-journald[661]: Received client request to flush runtime journal. [ 12.026521] Adding 8388544k swap on /swap.img. Priority:-2 extents:7 across:8953792k FS [ 14.155497] at24 0-0050: supply vcc not found, using dummy regulator [ 14.155672] at24 0-0050: 65536 byte 24c512 EEPROM, writable, 1 bytes/write [ 14.155701] at24 1-0050: supply vcc not found, using dummy regulator [ 14.155732] sysfs: cannot create duplicate filename '/bus/nvmem/devices/module-vpd' [ 14.155734] CPU: 9 PID: 723 Comm: systemd-udevd Not tainted 5.11.0-11-generic #12-Ubuntu [ 14.155738] Call Trace: [ 14.155739] [c00000003d2db080] [c00000000098b720] dump_stack+0xc4/0x114 (unreliable) [ 14.155746] [c00000003d2db0d0] [c00000000064c3e8] sysfs_warn_dup+0x88/0xc0 [ 14.155752] [c00000003d2db150] [c00000000064cb0c] sysfs_do_create_link_sd+0x17c/0x190 [ 14.155756] [c00000003d2db1a0] [c000000000b58554] bus_add_device+0x94/0x1d0 [ 14.155761] [c00000003d2db220] [c000000000b54128] device_add+0x3b8/0x6b0 [ 14.155765] [c00000003d2db2f0] [c000000000ea4c48] nvmem_register+0x208/0x660 [ 14.155770] [c00000003d2db390] [c000000000ea50fc] devm_nvmem_register+0x5c/0xc0 [ 14.155774] [c00000003d2db3d0] [c008000001760e4c] at24_probe+0x664/0x8d0 [at24] [ 14.155779] [c00000003d2db650] [c000000000daf920] i2c_device_probe+0x190/0x620 [ 14.155783] [c00000003d2db6f0] [c000000000b5a1fc] really_probe+0x18c/0x6e0 [ 14.155787] [c00000003d2db790] [c000000000b5a89c] driver_probe_device+0x14c/0x1f0 [ 14.155792] [c00000003d2db810] [c000000000b5b2ec] device_driver_attach+0x11c/0x130 [ 14.155796] [c00000003d2db850] [c000000000b5b3e0] __driver_attach+0xe0/0x1e0 [ 14.155800] [c00000003d2db8d0] [c000000000b56698] bus_for_each_dev+0xa8/0x130 [ 14.155804] [c00000003d2db930] [c000000000b59624] driver_attach+0x34/0x50 [ 14.155808] [c00000003d2db950] [c000000000b58b30] bus_add_driver+0x1b0/0x2f0 [ 14.155812] [c00000003d2db9e0] [c000000000b5c514] driver_register+0xb4/0x1c0 [ 14.155816] [c00000003d2dba50] [c000000000daf298] i2c_register_driver+0x78/0x120 [ 14.155820] [c00000003d2dbad0] [c0080000017612d0] at24_init+0x6c/0x88 [at24] [ 14.155825] [c00000003d2dbb30] [c0000000000127b0] do_one_initcall+0x60/0x2d0 [ 14.155829] [c00000003d2dbc00] [c00000000026c00c] do_init_module+0x7c/0x350 [ 14.155833] [c00000003d2dbc90] [c00000000026e034] __do_sys_finit_module+0xd4/0x160 [ 14.155837] [c00000003d2dbdb0] [c000000000036d94] system_call_exception+0xf4/0x200 [ 14.155841] [c00000003d2dbe10] [c00000000000d374] system_call_vectored_common+0xf4/0x26c [ 14.155891] at24: probe of 1-0050 failed with error -17 [ 14.155905] at24 2-0050: supply vcc not found, using dummy regulator [ 14.155935] sysfs: cannot create duplicate filename '/bus/nvmem/devices/module-vpd' [ 14.155937] CPU: 9 PID: 723 Comm: systemd-udevd Not tainted 5.11.0-11-generic #12-Ubuntu [ 14.155939] Call Trace: [ 14.155940] [c00000003d2db080] [c00000000098b720] dump_stack+0xc4/0x114 (unreliable) [ 14.155945] [c00000003d2db0d0] [c00000000064c3e8] sysfs_warn_dup+0x88/0xc0 [ 14.155949] [c00000003d2db150] [c00000000064cb0c] sysfs_do_create_link_sd+0x17c/0x190 [ 14.155953] [c00000003d2db1a0] [c000000000b58554] bus_add_device+0x94/0x1d0 [ 14.155957] [c00000003d2db220] [c000000000b54128] device_add+0x3b8/0x6b0 [ 14.155961] [c00000003d2db2f0] [c000000000ea4c48] nvmem_register+0x208/0x660 [ 14.155965] [c00000003d2db390] [c000000000ea50fc] devm_nvmem_register+0x5c/0xc0 [ 14.155969] [c00000003d2db3d0] [c008000001760e4c] at24_probe+0x664/0x8d0 [at24] [ 14.155974] [c00000003d2db650] [c000000000daf920] i2c_device_probe+0x190/0x620 [ 14.155977] [c00000003d2db6f0] [c000000000b5a1fc] really_probe+0x18c/0x6e0 [ 14.155981] [c00000003d2db790] [c000000000b5a89c] driver_probe_device+0x14c/0x1f0 [ 14.155985] [c00000003d2db810] [c000000000b5b2ec] device_driver_attach+0x11c/0x130 [ 14.155990] [c00000003d2db850] [c000000000b5b3e0] __driver_attach+0xe0/0x1e0 [ 14.155994] [c00000003d2db8d0] [c000000000b56698] bus_for_each_dev+0xa8/0x130 [ 14.155997] [c00000003d2db930] [c000000000b59624] driver_attach+0x34/0x50 [ 14.156001] [c00000003d2db950] [c000000000b58b30] bus_add_driver+0x1b0/0x2f0 [ 14.156005] [c00000003d2db9e0] [c000000000b5c514] driver_register+0xb4/0x1c0 [ 14.156009] [c00000003d2dba50] [c000000000daf298] i2c_register_driver+0x78/0x120 [ 14.156013] [c00000003d2dbad0] [c0080000017612d0] at24_init+0x6c/0x88 [at24] [ 14.156017] [c00000003d2dbb30] [c0000000000127b0] do_one_initcall+0x60/0x2d0 [ 14.156021] [c00000003d2dbc00] [c00000000026c00c] do_init_module+0x7c/0x350 [ 14.156024] [c00000003d2dbc90] [c00000000026e034] __do_sys_finit_module+0xd4/0x160 [ 14.156028] [c00000003d2dbdb0] [c000000000036d94] system_call_exception+0xf4/0x200 [ 14.156032] [c00000003d2dbe10] [c00000000000d374] system_call_vectored_common+0xf4/0x26c [ 14.156074] at24: probe of 2-0050 failed with error -17 [ 14.156086] at24 3-0050: supply vcc not found, using dummy regulator [ 14.158207] at24 3-0050: 256 byte spd EEPROM, read-only [ 14.158234] at24 3-0051: supply vcc not found, using dummy regulator [ 14.158267] sysfs: cannot create duplicate filename '/bus/nvmem/devices/dimm-spd' [ 14.158269] CPU: 9 PID: 723 Comm: systemd-udevd Not tainted 5.11.0-11-generic #12-Ubuntu [ 14.158272] Call Trace: [ 14.158273] [c00000003d2db080] [c00000000098b720] dump_stack+0xc4/0x114 (unreliable) [ 14.158279] [c00000003d2db0d0] [c00000000064c3e8] sysfs_warn_dup+0x88/0xc0 [ 14.158283] [c00000003d2db150] [c00000000064cb0c] sysfs_do_create_link_sd+0x17c/0x190 [ 14.158288] [c00000003d2db1a0] [c000000000b58554] bus_add_device+0x94/0x1d0 [ 14.158292] [c00000003d2db220] [c000000000b54128] device_add+0x3b8/0x6b0 [ 14.158296] [c00000003d2db2f0] [c000000000ea4c48] nvmem_register+0x208/0x660 [ 14.158300] [c00000003d2db390] [c000000000ea50fc] devm_nvmem_register+0x5c/0xc0 [ 14.158305] [c00000003d2db3d0] [c008000001760e4c] at24_probe+0x664/0x8d0 [at24] [ 14.158310] [c00000003d2db650] [c000000000daf920] i2c_device_probe+0x190/0x620 [ 14.158314] [c00000003d2db6f0] [c000000000b5a1fc] really_probe+0x18c/0x6e0 [ 14.158319] [c00000003d2db790] [c000000000b5a89c] driver_probe_device+0x14c/0x1f0 [ 14.158323] [c00000003d2db810] [c000000000b5b2ec] device_driver_attach+0x11c/0x130 [ 14.158328] [c00000003d2db850] [c000000000b5b3e0] __driver_attach+0xe0/0x1e0 [ 14.158332] [c00000003d2db8d0] [c000000000b56698] bus_for_each_dev+0xa8/0x130 [ 14.158337] [c00000003d2db930] [c000000000b59624] driver_attach+0x34/0x50 [ 14.158341] [c00000003d2db950] [c000000000b58b30] bus_add_driver+0x1b0/0x2f0 [ 14.158345] [c00000003d2db9e0] [c000000000b5c514] driver_register+0xb4/0x1c0 [ 14.158350] [c00000003d2dba50] [c000000000daf298] i2c_register_driver+0x78/0x120 [ 14.158353] [c00000003d2dbad0] [c0080000017612d0] at24_init+0x6c/0x88 [at24] [ 14.158358] [c00000003d2dbb30] [c0000000000127b0] do_one_initcall+0x60/0x2d0 [ 14.158362] [c00000003d2dbc00] [c00000000026c00c] do_init_module+0x7c/0x350 [ 14.158367] [c00000003d2dbc90] [c00000000026e034] __do_sys_finit_module+0xd4/0x160 [ 14.158371] [c00000003d2dbdb0] [c000000000036d94] system_call_exception+0xf4/0x200 [ 14.158375] [c00000003d2dbe10] [c00000000000d374] system_call_vectored_common+0xf4/0x26c [ 14.158417] at24: probe of 3-0051 failed with error -17 [ 14.158430] at24 3-0052: supply vcc not found, using dummy regulator [ 14.158462] sysfs: cannot create duplicate filename '/bus/nvmem/devices/dimm-spd' [ 14.158464] CPU: 9 PID: 723 Comm: systemd-udevd Not tainted 5.11.0-11-generic #12-Ubuntu [ 14.158467] Call Trace: [ 14.158467] [c00000003d2db080] [c00000000098b720] dump_stack+0xc4/0x114 (unreliable) [ 14.158473] [c00000003d2db0d0] [c00000000064c3e8] sysfs_warn_dup+0x88/0xc0 [ 14.158477] [c00000003d2db150] [c00000000064cb0c] sysfs_do_create_link_sd+0x17c/0x190 [ 14.158481] [c00000003d2db1a0] [c000000000b58554] bus_add_device+0x94/0x1d0 [ 14.158486] [c00000003d2db220] [c000000000b54128] device_add+0x3b8/0x6b0 [ 14.158490] [c00000003d2db2f0] [c000000000ea4c48] nvmem_register+0x208/0x660 [ 14.158494] [c00000003d2db390] [c000000000ea50fc] devm_nvmem_register+0x5c/0xc0 [ 14.158501] [c00000003d2db3d0] [c008000001760e4c] at24_probe+0x664/0x8d0 [at24] [ 14.158509] [c00000003d2db650] [c000000000daf920] i2c_device_probe+0x190/0x620 [ 14.158513] [c00000003d2db6f0] [c000000000b5a1fc] really_probe+0x18c/0x6e0 [ 14.158518] [c00000003d2db790] [c000000000b5a89c] driver_probe_device+0x14c/0x1f0 [ 14.158522] [c00000003d2db810] [c000000000b5b2ec] device_driver_attach+0x11c/0x130 [ 14.158527] [c00000003d2db850] [c000000000b5b3e0] __driver_attach+0xe0/0x1e0 [ 14.158531] [c00000003d2db8d0] [c000000000b56698] bus_for_each_dev+0xa8/0x130 [ 14.158536] [c00000003d2db930] [c000000000b59624] driver_attach+0x34/0x50 [ 14.158540] [c00000003d2db950] [c000000000b58b30] bus_add_driver+0x1b0/0x2f0 [ 14.158544] [c00000003d2db9e0] [c000000000b5c514] driver_register+0xb4/0x1c0 [ 14.158549] [c00000003d2dba50] [c000000000daf298] i2c_register_driver+0x78/0x120 [ 14.158553] [c00000003d2dbad0] [c0080000017612d0] at24_init+0x6c/0x88 [at24] [ 14.158558] [c00000003d2dbb30] [c0000000000127b0] do_one_initcall+0x60/0x2d0 [ 14.158562] [c00000003d2dbc00] [c00000000026c00c] do_init_module+0x7c/0x350 [ 14.158566] [c00000003d2dbc90] [c00000000026e034] __do_sys_finit_module+0xd4/0x160 [ 14.158570] [c00000003d2dbdb0] [c000000000036d94] system_call_exception+0xf4/0x200 [ 14.158575] [c00000003d2dbe10] [c00000000000d374] system_call_vectored_common+0xf4/0x26c [ 14.158648] at24: probe of 3-0052 failed with error -17 [ 14.158661] at24 3-0053: supply vcc not found, using dummy regulator [ 14.158692] sysfs: cannot create duplicate filename '/bus/nvmem/devices/dimm-spd' [ 14.158694] CPU: 9 PID: 723 Comm: systemd-udevd Not tainted 5.11.0-11-generic #12-Ubuntu [ 14.158696] Call Trace: [ 14.158697] [c00000003d2db080] [c00000000098b720] dump_stack+0xc4/0x114 (unreliable) [ 14.158703] [c00000003d2db0d0] [c00000000064c3e8] sysfs_warn_dup+0x88/0xc0 [ 14.158707] [c00000003d2db150] [c00000000064cb0c] sysfs_do_create_link_sd+0x17c/0x190 [ 14.158711] [c00000003d2db1a0] [c000000000b58554] bus_add_device+0x94/0x1d0 [ 14.158716] [c00000003d2db220] [c000000000b54128] device_add+0x3b8/0x6b0 [ 14.158720] [c00000003d2db2f0] [c000000000ea4c48] nvmem_register+0x208/0x660 [ 14.158724] [c00000003d2db390] [c000000000ea50fc] devm_nvmem_register+0x5c/0xc0 [ 14.158728] [c00000003d2db3d0] [c008000001760e4c] at24_probe+0x664/0x8d0 [at24] [ 14.158734] [c00000003d2db650] [c000000000daf920] i2c_device_probe+0x190/0x620 [ 14.158738] [c00000003d2db6f0] [c000000000b5a1fc] really_probe+0x18c/0x6e0 [ 14.158742] [c00000003d2db790] [c000000000b5a89c] driver_probe_device+0x14c/0x1f0 [ 14.158747] [c00000003d2db810] [c000000000b5b2ec] device_driver_attach+0x11c/0x130 [ 14.158751] [c00000003d2db850] [c000000000b5b3e0] __driver_attach+0xe0/0x1e0 [ 14.158755] [c00000003d2db8d0] [c000000000b56698] bus_for_each_dev+0xa8/0x130 [ 14.158760] [c00000003d2db930] [c000000000b59624] driver_attach+0x34/0x50 [ 14.158764] [c00000003d2db950] [c000000000b58b30] bus_add_driver+0x1b0/0x2f0 [ 14.158768] [c00000003d2db9e0] [c000000000b5c514] driver_register+0xb4/0x1c0 [ 14.158773] [c00000003d2dba50] [c000000000daf298] i2c_register_driver+0x78/0x120 [ 14.158776] [c00000003d2dbad0] [c0080000017612d0] at24_init+0x6c/0x88 [at24] [ 14.158781] [c00000003d2dbb30] [c0000000000127b0] do_one_initcall+0x60/0x2d0 [ 14.158785] [c00000003d2dbc00] [c00000000026c00c] do_init_module+0x7c/0x350 [ 14.158789] [c00000003d2dbc90] [c00000000026e034] __do_sys_finit_module+0xd4/0x160 [ 14.158794] [c00000003d2dbdb0] [c000000000036d94] system_call_exception+0xf4/0x200 [ 14.158798] [c00000003d2dbe10] [c00000000000d374] system_call_vectored_common+0xf4/0x26c [ 14.158844] at24: probe of 3-0053 failed with error -17 [ 14.158859] at24 4-0054: supply vcc not found, using dummy regulator [ 14.158891] sysfs: cannot create duplicate filename '/bus/nvmem/devices/dimm-spd' [ 14.158893] CPU: 9 PID: 723 Comm: systemd-udevd Not tainted 5.11.0-11-generic #12-Ubuntu [ 14.158896] Call Trace: [ 14.158897] [c00000003d2db080] [c00000000098b720] dump_stack+0xc4/0x114 (unreliable) [ 14.158902] [c00000003d2db0d0] [c00000000064c3e8] sysfs_warn_dup+0x88/0xc0 [ 14.158906] [c00000003d2db150] [c00000000064cb0c] sysfs_do_create_link_sd+0x17c/0x190 [ 14.158911] [c00000003d2db1a0] [c000000000b58554] bus_add_device+0x94/0x1d0 [ 14.158915] [c00000003d2db220] [c000000000b54128] device_add+0x3b8/0x6b0 [ 14.158920] [c00000003d2db2f0] [c000000000ea4c48] nvmem_register+0x208/0x660 [ 14.158925] [c00000003d2db390] [c000000000ea50fc] devm_nvmem_register+0x5c/0xc0 [ 14.158929] [c00000003d2db3d0] [c008000001760e4c] at24_probe+0x664/0x8d0 [at24] [ 14.158934] [c00000003d2db650] [c000000000daf920] i2c_device_probe+0x190/0x620 [ 14.158938] [c00000003d2db6f0] [c000000000b5a1fc] really_probe+0x18c/0x6e0 [ 14.158942] [c00000003d2db790] [c000000000b5a89c] driver_probe_device+0x14c/0x1f0 [ 14.158947] [c00000003d2db810] [c000000000b5b2ec] device_driver_attach+0x11c/0x130 [ 14.158951] [c00000003d2db850] [c000000000b5b3e0] __driver_attach+0xe0/0x1e0 [ 14.158956] [c00000003d2db8d0] [c000000000b56698] bus_for_each_dev+0xa8/0x130 [ 14.158960] [c00000003d2db930] [c000000000b59624] driver_attach+0x34/0x50 [ 14.158964] [c00000003d2db950] [c000000000b58b30] bus_add_driver+0x1b0/0x2f0 [ 14.158968] [c00000003d2db9e0] [c000000000b5c514] driver_register+0xb4/0x1c0 [ 14.158972] [c00000003d2dba50] [c000000000daf298] i2c_register_driver+0x78/0x120 [ 14.158976] [c00000003d2dbad0] [c0080000017612d0] at24_init+0x6c/0x88 [at24] [ 14.158981] [c00000003d2dbb30] [c0000000000127b0] do_one_initcall+0x60/0x2d0 [ 14.158985] [c00000003d2dbc00] [c00000000026c00c] do_init_module+0x7c/0x350 [ 14.158989] [c00000003d2dbc90] [c00000000026e034] __do_sys_finit_module+0xd4/0x160 [ 14.158993] [c00000003d2dbdb0] [c000000000036d94] system_call_exception+0xf4/0x200 [ 14.158998] [c00000003d2dbe10] [c00000000000d374] system_call_vectored_common+0xf4/0x26c [ 14.159041] at24: probe of 4-0054 failed with error -17 [ 14.159053] at24 4-0055: supply vcc not found, using dummy regulator [ 14.159084] sysfs: cannot create duplicate filename '/bus/nvmem/devices/dimm-spd' [ 14.159085] CPU: 9 PID: 723 Comm: systemd-udevd Not tainted 5.11.0-11-generic #12-Ubuntu [ 14.159088] Call Trace: [ 14.159089] [c00000003d2db080] [c00000000098b720] dump_stack+0xc4/0x114 (unreliable) [ 14.159094] [c00000003d2db0d0] [c00000000064c3e8] sysfs_warn_dup+0x88/0xc0 [ 14.159098] [c00000003d2db150] [c00000000064cb0c] sysfs_do_create_link_sd+0x17c/0x190 [ 14.159103] [c00000003d2db1a0] [c000000000b58554] bus_add_device+0x94/0x1d0 [ 14.159107] [c00000003d2db220] [c000000000b54128] device_add+0x3b8/0x6b0 [ 14.159111] [c00000003d2db2f0] [c000000000ea4c48] nvmem_register+0x208/0x660 [ 14.159115] [c00000003d2db390] [c000000000ea50fc] devm_nvmem_register+0x5c/0xc0 [ 14.159119] [c00000003d2db3d0] [c008000001760e4c] at24_probe+0x664/0x8d0 [at24] [ 14.159124] [c00000003d2db650] [c000000000daf920] i2c_device_probe+0x190/0x620 [ 14.159129] [c00000003d2db6f0] [c000000000b5a1fc] really_probe+0x18c/0x6e0 [ 14.159133] [c00000003d2db790] [c000000000b5a89c] driver_probe_device+0x14c/0x1f0 [ 14.159138] [c00000003d2db810] [c000000000b5b2ec] device_driver_attach+0x11c/0x130 [ 14.159142] [c00000003d2db850] [c000000000b5b3e0] __driver_attach+0xe0/0x1e0 [ 14.159147] [c00000003d2db8d0] [c000000000b56698] bus_for_each_dev+0xa8/0x130 [ 14.159151] [c00000003d2db930] [c000000000b59624] driver_attach+0x34/0x50 [ 14.159155] [c00000003d2db950] [c000000000b58b30] bus_add_driver+0x1b0/0x2f0 [ 14.159160] [c00000003d2db9e0] [c000000000b5c514] driver_register+0xb4/0x1c0 [ 14.159164] [c00000003d2dba50] [c000000000daf298] i2c_register_driver+0x78/0x120 [ 14.159168] [c00000003d2dbad0] [c0080000017612d0] at24_init+0x6c/0x88 [at24] [ 14.159173] [c00000003d2dbb30] [c0000000000127b0] do_one_initcall+0x60/0x2d0 [ 14.159177] [c00000003d2dbc00] [c00000000026c00c] do_init_module+0x7c/0x350 [ 14.159181] [c00000003d2dbc90] [c00000000026e034] __do_sys_finit_module+0xd4/0x160 [ 14.159185] [c00000003d2dbdb0] [c000000000036d94] system_call_exception+0xf4/0x200 [ 14.159190] [c00000003d2dbe10] [c00000000000d374] system_call_vectored_common+0xf4/0x26c [ 14.159233] at24: probe of 4-0055 failed with error -17 [ 14.159245] at24 4-0056: supply vcc not found, using dummy regulator [ 14.159277] sysfs: cannot create duplicate filename '/bus/nvmem/devices/dimm-spd' [ 14.159278] CPU: 9 PID: 723 Comm: systemd-udevd Not tainted 5.11.0-11-generic #12-Ubuntu [ 14.159281] Call Trace: [ 14.159282] [c00000003d2db080] [c00000000098b720] dump_stack+0xc4/0x114 (unreliable) [ 14.159287] [c00000003d2db0d0] [c00000000064c3e8] sysfs_warn_dup+0x88/0xc0 [ 14.159292] [c00000003d2db150] [c00000000064cb0c] sysfs_do_create_link_sd+0x17c/0x190 [ 14.159296] [c00000003d2db1a0] [c000000000b58554] bus_add_device+0x94/0x1d0 [ 14.159301] [c00000003d2db220] [c000000000b54128] device_add+0x3b8/0x6b0 [ 14.159304] [c00000003d2db2f0] [c000000000ea4c48] nvmem_register+0x208/0x660 [ 14.159309] [c00000003d2db390] [c000000000ea50fc] devm_nvmem_register+0x5c/0xc0 [ 14.159313] [c00000003d2db3d0] [c008000001760e4c] at24_probe+0x664/0x8d0 [at24] [ 14.159318] [c00000003d2db650] [c000000000daf920] i2c_device_probe+0x190/0x620 [ 14.159322] [c00000003d2db6f0] [c000000000b5a1fc] really_probe+0x18c/0x6e0 [ 14.159327] [c00000003d2db790] [c000000000b5a89c] driver_probe_device+0x14c/0x1f0 [ 14.159332] [c00000003d2db810] [c000000000b5b2ec] device_driver_attach+0x11c/0x130 [ 14.159337] [c00000003d2db850] [c000000000b5b3e0] __driver_attach+0xe0/0x1e0 [ 14.159341] [c00000003d2db8d0] [c000000000b56698] bus_for_each_dev+0xa8/0x130 [ 14.159345] [c00000003d2db930] [c000000000b59624] driver_attach+0x34/0x50 [ 14.159349] [c00000003d2db950] [c000000000b58b30] bus_add_driver+0x1b0/0x2f0 [ 14.159354] [c00000003d2db9e0] [c000000000b5c514] driver_register+0xb4/0x1c0 [ 14.159358] [c00000003d2dba50] [c000000000daf298] i2c_register_driver+0x78/0x120 [ 14.159362] [c00000003d2dbad0] [c0080000017612d0] at24_init+0x6c/0x88 [at24] [ 14.159367] [c00000003d2dbb30] [c0000000000127b0] do_one_initcall+0x60/0x2d0 [ 14.159371] [c00000003d2dbc00] [c00000000026c00c] do_init_module+0x7c/0x350 [ 14.159375] [c00000003d2dbc90] [c00000000026e034] __do_sys_finit_module+0xd4/0x160 [ 14.159379] [c00000003d2dbdb0] [c000000000036d94] system_call_exception+0xf4/0x200 [ 14.159383] [c00000003d2dbe10] [c00000000000d374] system_call_vectored_common+0xf4/0x26c [ 14.159424] at24: probe of 4-0056 failed with error -17 [ 14.159436] at24 4-0057: supply vcc not found, using dummy regulator [ 14.159470] sysfs: cannot create duplicate filename '/bus/nvmem/devices/dimm-spd' [ 14.159471] CPU: 9 PID: 723 Comm: systemd-udevd Not tainted 5.11.0-11-generic #12-Ubuntu [ 14.159474] Call Trace: [ 14.159475] [c00000003d2db080] [c00000000098b720] dump_stack+0xc4/0x114 (unreliable) [ 14.159480] [c00000003d2db0d0] [c00000000064c3e8] sysfs_warn_dup+0x88/0xc0 [ 14.159484] [c00000003d2db150] [c00000000064cb0c] sysfs_do_create_link_sd+0x17c/0x190 [ 14.159489] [c00000003d2db1a0] [c000000000b58554] bus_add_device+0x94/0x1d0 [ 14.159493] [c00000003d2db220] [c000000000b54128] device_add+0x3b8/0x6b0 [ 14.159497] [c00000003d2db2f0] [c000000000ea4c48] nvmem_register+0x208/0x660 [ 14.159501] [c00000003d2db390] [c000000000ea50fc] devm_nvmem_register+0x5c/0xc0 [ 14.159505] [c00000003d2db3d0] [c008000001760e4c] at24_probe+0x664/0x8d0 [at24] [ 14.159510] [c00000003d2db650] [c000000000daf920] i2c_device_probe+0x190/0x620 [ 14.159514] [c00000003d2db6f0] [c000000000b5a1fc] really_probe+0x18c/0x6e0 [ 14.159519] [c00000003d2db790] [c000000000b5a89c] driver_probe_device+0x14c/0x1f0 [ 14.159523] [c00000003d2db810] [c000000000b5b2ec] device_driver_attach+0x11c/0x130 [ 14.159528] [c00000003d2db850] [c000000000b5b3e0] __driver_attach+0xe0/0x1e0 [ 14.159532] [c00000003d2db8d0] [c000000000b56698] bus_for_each_dev+0xa8/0x130 [ 14.159536] [c00000003d2db930] [c000000000b59624] driver_attach+0x34/0x50 [ 14.159541] [c00000003d2db950] [c000000000b58b30] bus_add_driver+0x1b0/0x2f0 [ 14.159545] [c00000003d2db9e0] [c000000000b5c514] driver_register+0xb4/0x1c0 [ 14.159549] [c00000003d2dba50] [c000000000daf298] i2c_register_driver+0x78/0x120 [ 14.159553] [c00000003d2dbad0] [c0080000017612d0] at24_init+0x6c/0x88 [at24] [ 14.159558] [c00000003d2dbb30] [c0000000000127b0] do_one_initcall+0x60/0x2d0 [ 14.159562] [c00000003d2dbc00] [c00000000026c00c] do_init_module+0x7c/0x350 [ 14.159566] [c00000003d2dbc90] [c00000000026e034] __do_sys_finit_module+0xd4/0x160 [ 14.159570] [c00000003d2dbdb0] [c000000000036d94] system_call_exception+0xf4/0x200 [ 14.159574] [c00000003d2dbe10] [c00000000000d374] system_call_vectored_common+0xf4/0x26c [ 14.159614] at24: probe of 4-0057 failed with error -17 [ 14.202554] IPMI message handler: version 39.2 [ 14.340077] ipmi device interface [ 14.366040] ipmi-powernv ibm,opal:ipmi: IPMI message handler: The GUID response from the BMC was too short, it was 1 but should have been 17. Assuming GUID is not available. [ 14.387906] ipmi-powernv ibm,opal:ipmi: IPMI message handler: Found new BMC (man_id: 0x00cb06, prod_id: 0x0001, dev_id: 0x00) [ 14.398433] 5 fixed-partitions partitions found on MTD device flash@0 [ 14.398437] Creating 5 MTD partitions on "flash@0": [ 14.398439] 0x000000000000-0x000004000000 : "PNOR" [ 14.398617] 0x0000022a1000-0x000003821000 : "BOOTKERNEL" [ 14.398790] 0x000003944000-0x000003946000 : "VERSION" [ 14.398924] 0x000003989000-0x0000039c9000 : "IMA_CATALOG" [ 14.399050] 0x000003e10000-0x000003ff0000 : "BOOTKERNFW" [ 15.091676] mc: Linux media interface: v0.10 [ 15.334516] usb 1-2.3: current rate 30464 is different from the runtime rate 96000 [ 15.356722] snd_hda_intel 0000:01:00.1: enabling device (0540 -> 0542) [ 15.356734] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option [ 15.371011] usb 1-2.3: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 15.371016] usb 1-2.3: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1 [ 15.377005] usb 1-2.3: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 15.377010] usb 1-2.3: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1 [ 15.380129] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card0/input24 [ 15.394521] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 15.394526] usb 1-2.3: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1 [ 15.400529] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 15.400533] usb 1-2.3: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1 [ 15.406530] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 15.406535] usb 1-2.3: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1 [ 15.406810] usbcore: registered new interface driver snd-usb-audio [ 16.986526] alua: device handler registered [ 16.988100] emc: device handler registered [ 16.989727] rdac: device handler registered [ 17.482403] loop0: detected capacity change from 110680 to 0 [ 17.539281] loop1: detected capacity change from 60496 to 0 [ 17.563319] loop2: detected capacity change from 128784 to 0 [ 18.621379] KVMPPC-UVMEM: No support for secure guests [ 18.631002] audit: type=1400 audit(1616423452.528:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1448 comm="apparmor_parser" [ 18.631906] audit: type=1400 audit(1616423452.528:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1443 comm="apparmor_parser" [ 18.632499] audit: type=1400 audit(1616423452.528:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1440 comm="apparmor_parser" [ 18.633025] audit: type=1400 audit(1616423452.528:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1438 comm="apparmor_parser" [ 18.633029] audit: type=1400 audit(1616423452.528:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1438 comm="apparmor_parser" [ 18.634479] audit: type=1400 audit(1616423452.528:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1447 comm="apparmor_parser" [ 18.634483] audit: type=1400 audit(1616423452.528:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1447 comm="apparmor_parser" [ 18.634486] audit: type=1400 audit(1616423452.528:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1447 comm="apparmor_parser" [ 18.662621] audit: type=1400 audit(1616423452.564:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1446 comm="apparmor_parser" [ 18.662628] audit: type=1400 audit(1616423452.564:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1446 comm="apparmor_parser" [ 24.359459] tg3 0004:01:00.1 enP4p1s0f1: Link is up at 1000 Mbps, full duplex [ 24.359464] tg3 0004:01:00.1 enP4p1s0f1: Flow control is on for TX and on for RX [ 24.359467] tg3 0004:01:00.1 enP4p1s0f1: EEE is disabled [ 24.367288] IPv6: ADDRCONF(NETDEV_CHANGE): enP4p1s0f1: link becomes ready [ 24.451086] tg3 0004:01:00.0 enP4p1s0f0: Link is up at 1000 Mbps, full duplex [ 24.451089] tg3 0004:01:00.0 enP4p1s0f0: Flow control is on for TX and on for RX [ 24.451092] tg3 0004:01:00.0 enP4p1s0f0: EEE is disabled [ 25.375010] IPv6: ADDRCONF(NETDEV_CHANGE): enP4p1s0f0: link becomes ready [ 148.972764] loop3: detected capacity change from 8 to 0 [ 153.843601] kauditd_printk_skb: 34 callbacks suppressed [ 153.843608] audit: type=1400 audit(1616423588.014:46): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1658 comm="cupsd" capability=12 capname="net_admin" [ 154.251872] audit: type=1400 audit(1616423588.426:47): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1828 comm="cups-browsed" capability=23 capname="sys_nice" [ 156.116720] radeon 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none [ 399.696135] Facility 'SCV' unavailable (12), exception at 0x7fea27aa88a0, MSR=900000000280f033 [ 399.696144] qemu-system-ppc[3817]: illegal instruction (4) at 7fea27aa88a0 nip 7fea27aa88a0 lr 7fea27a9c218 code 1 in libpthread-2.33.so[7fea27a90000+30000] [ 399.696158] qemu-system-ppc[3817]: code: 3c62fffd 38636a38 4bfedaa9 e8410018 38210030 e8010010 ebc1fff0 ebe1fff8 [ 399.696162] qemu-system-ppc[3817]: code: 7c0803a6 4e800020 60000000 60420000 <44000001> 4bffffa4 00000000 01000000 [ 441.880261] Facility 'SCV' unavailable (12), exception at 0x7545fc134c0c, MSR=900000000280f033 [ 441.880270] qemu-system-ppc[4119]: illegal instruction (4) at 7545fc134c0c nip 7545fc134c0c lr 7545fc134be8 code 1 in libc-2.33.so[7545fbff0000+220000] [ 441.880283] qemu-system-ppc[4119]: code: 7c7e1b78 7cbf2b78 4bf667b5 60000000 7fa4eb78 7fe5fb78 38000092 e92d8f98 [ 441.880287] qemu-system-ppc[4119]: code: 7c7d1b78 7fc3f378 75290010 41820068 <44000001> 7c7f1b78 3920f000 7c3f4840 [ 470.546937] Facility 'SCV' unavailable (12), exception at 0x7624f8134c0c, MSR=900000000280f033 [ 470.546966] qemu-system-ppc[4262]: illegal instruction (4) at 7624f8134c0c nip 7624f8134c0c lr 7624f8134be8 code 1 in libc-2.33.so[7624f7ff0000+220000] [ 470.546980] qemu-system-ppc[4262]: code: 7c7e1b78 7cbf2b78 4bf667b5 60000000 7fa4eb78 7fe5fb78 38000092 e92d8f98 [ 470.546984] qemu-system-ppc[4262]: code: 7c7d1b78 7fc3f378 75290010 41820068 <44000001> 7c7f1b78 3920f000 7c3f4840 [ 480.583317] logitech-hidpp-device 0003:046D:4054.000A: HID++ 4.5 device connected. [ 483.587961] usb 1-2.1: USB disconnect, device number 4 [ 483.588612] usb 1-2: USB disconnect, device number 2 [ 483.657234] usb 1-2.2: USB disconnect, device number 6 [ 483.781612] usb 2-2: USB disconnect, device number 2 [ 483.961350] usb 1-2.3: USB disconnect, device number 9 [ 564.528798] logitech-hidpp-device 0003:046D:4023.0009: HID++ 2.0 device connected. [ 588.630516] Facility 'SCV' unavailable (12), exception at 0x7a23ce0f4c0c, MSR=900000000280f033 [ 588.630529] qemu-system-ppc[4382]: illegal instruction (4) at 7a23ce0f4c0c nip 7a23ce0f4c0c lr 7a23ce0f4be8 code 1 in libc-2.33.so[7a23cdfb0000+220000] [ 588.630546] qemu-system-ppc[4382]: code: 7c7e1b78 7cbf2b78 4bf667b5 60000000 7fa4eb78 7fe5fb78 38000092 e92d8f98 [ 588.630551] qemu-system-ppc[4382]: code: 7c7d1b78 7fc3f378 75290010 41820068 <44000001> 7c7f1b78 3920f000 7c3f4840 [ 926.689111] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 926.727683] usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 926.727689] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 926.727693] usb 2-2: Product: 4-Port USB 3.0 Hub [ 926.727696] usb 2-2: Manufacturer: Generic [ 926.748149] hub 2-2:1.0: USB hub found [ 926.749606] hub 2-2:1.0: 4 ports detected [ 926.844531] usb 1-2: new high-speed USB device number 10 using xhci_hcd [ 927.005959] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 927.005965] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 927.005969] usb 1-2: Product: 4-Port USB 2.0 Hub [ 927.005972] usb 1-2: Manufacturer: Generic [ 927.017614] hub 1-2:1.0: USB hub found [ 927.018795] hub 1-2:1.0: 4 ports detected [ 927.320704] usb 1-2.1: new low-speed USB device number 11 using xhci_hcd [ 927.431267] usb 1-2.1: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00 [ 927.431273] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 927.431277] usb 1-2.1: Product: USB OPTICAL MOUSE [ 927.448193] input: USB OPTICAL MOUSE as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:093A:2521.000B/input/input25 [ 927.448400] hid-generic 0003:093A:2521.000B: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0003:01:00.0-2.1/input0 [ 927.528729] usb 1-2.2: new full-speed USB device number 12 using xhci_hcd [ 927.635439] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.00 [ 927.635447] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 927.635451] usb 1-2.2: Product: G513 Carbon Tactile [ 927.635454] usb 1-2.2: Manufacturer: Logitech [ 927.635456] usb 1-2.2: SerialNumber: 0A7837503930 [ 927.659953] input: Logitech G513 Carbon Tactile as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C33C.000C/input/input26 [ 927.716711] hid-generic 0003:046D:C33C.000C: input,hidraw1: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0003:01:00.0-2.2/input0 [ 927.719936] input: Logitech G513 Carbon Tactile Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C33C.000D/input/input27 [ 927.776899] input: Logitech G513 Carbon Tactile Consumer Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C33C.000D/input/input28 [ 927.777082] hid-generic 0003:046D:C33C.000D: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0003:01:00.0-2.2/input1 [ 927.856891] usb 1-2.3: new full-speed USB device number 13 using xhci_hcd [ 927.979515] usb 1-2.3: New USB device found, idVendor=0ccd, idProduct=00b1, bcdDevice= 0.10 [ 927.979524] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 927.979530] usb 1-2.3: Product: Aureon 7.1 USB [ 928.066163] usb 1-2.3: current rate 30464 is different from the runtime rate 96000 [ 928.102672] usb 1-2.3: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 928.102676] usb 1-2.3: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1 [ 928.108673] usb 1-2.3: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 928.108677] usb 1-2.3: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1 [ 928.125926] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 928.125930] usb 1-2.3: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1 [ 928.131928] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 928.131931] usb 1-2.3: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1 [ 928.137929] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 928.137933] usb 1-2.3: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1 [ 928.141571] input: Aureon 7.1 USB as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.3/1-2.3:1.3/0003:0CCD:00B1.000E/input/input31 [ 928.201122] hid-generic 0003:0CCD:00B1.000E: input,hidraw7: USB HID v1.00 Device [Aureon 7.1 USB] on usb-0003:01:00.0-2.3/input3 [ 940.221229] usb 1-2.1: USB disconnect, device number 11 [ 940.222881] usb 1-2: USB disconnect, device number 10 [ 940.267143] usb 1-2.2: USB disconnect, device number 12 [ 940.372838] usb 2-2: USB disconnect, device number 3 [ 940.499174] usb 1-2.3: USB disconnect, device number 13 [ 952.566400] usb 2-2: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [ 952.602976] usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 952.602982] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 952.602986] usb 2-2: Product: 4-Port USB 3.0 Hub [ 952.602989] usb 2-2: Manufacturer: Generic [ 952.617639] hub 2-2:1.0: USB hub found [ 952.619121] hub 2-2:1.0: 4 ports detected [ 952.725298] usb 1-2: new high-speed USB device number 14 using xhci_hcd [ 952.885650] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 952.885657] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 952.885660] usb 1-2: Product: 4-Port USB 2.0 Hub [ 952.885663] usb 1-2: Manufacturer: Generic [ 952.903152] hub 1-2:1.0: USB hub found [ 952.904542] hub 1-2:1.0: 4 ports detected [ 953.205508] usb 1-2.1: new low-speed USB device number 15 using xhci_hcd [ 953.312420] usb 1-2.1: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00 [ 953.312426] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 953.312430] usb 1-2.1: Product: USB OPTICAL MOUSE [ 953.337108] input: USB OPTICAL MOUSE as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:093A:2521.000F/input/input32 [ 953.337326] hid-generic 0003:093A:2521.000F: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0003:01:00.0-2.1/input0 [ 953.421034] usb 1-2.2: new full-speed USB device number 16 using xhci_hcd [ 953.534790] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.00 [ 953.534796] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 953.534800] usb 1-2.2: Product: G513 Carbon Tactile [ 953.534803] usb 1-2.2: Manufacturer: Logitech [ 953.534806] usb 1-2.2: SerialNumber: 0A7837503930 [ 953.563702] input: Logitech G513 Carbon Tactile as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C33C.0010/input/input33 [ 953.625485] hid-generic 0003:046D:C33C.0010: input,hidraw1: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0003:01:00.0-2.2/input0 [ 953.628658] input: Logitech G513 Carbon Tactile Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C33C.0011/input/input34 [ 953.685731] input: Logitech G513 Carbon Tactile Consumer Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C33C.0011/input/input35 [ 953.685934] hid-generic 0003:046D:C33C.0011: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0003:01:00.0-2.2/input1 [ 953.765618] usb 1-2.3: new full-speed USB device number 17 using xhci_hcd [ 953.890877] usb 1-2.3: New USB device found, idVendor=0ccd, idProduct=00b1, bcdDevice= 0.10 [ 953.890883] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 953.890887] usb 1-2.3: Product: Aureon 7.1 USB [ 953.976164] usb 1-2.3: current rate 30464 is different from the runtime rate 96000 [ 954.012673] usb 1-2.3: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 954.012677] usb 1-2.3: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1 [ 954.018674] usb 1-2.3: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 954.018678] usb 1-2.3: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1 [ 954.038929] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 954.038933] usb 1-2.3: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1 [ 954.044930] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 954.044934] usb 1-2.3: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1 [ 954.050931] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 954.050934] usb 1-2.3: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1 [ 954.054572] input: Aureon 7.1 USB as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.3/1-2.3:1.3/0003:0CCD:00B1.0012/input/input38 [ 954.113867] hid-generic 0003:0CCD:00B1.0012: input,hidraw7: USB HID v1.00 Device [Aureon 7.1 USB] on usb-0003:01:00.0-2.3/input3 [ 999.530367] usb 1-2: USB disconnect, device number 14 [ 999.530591] usb 1-2.1: USB disconnect, device number 15 [ 999.584965] usb 1-2.2: USB disconnect, device number 16 [ 999.683849] usb 2-2: USB disconnect, device number 4 [ 999.904941] usb 1-2.3: USB disconnect, device number 17 [ 1049.865610] usb 2-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [ 1049.900750] usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 1049.900755] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1049.900758] usb 2-2: Product: 4-Port USB 3.0 Hub [ 1049.900760] usb 2-2: Manufacturer: Generic [ 1049.921085] hub 2-2:1.0: USB hub found [ 1049.923142] hub 2-2:1.0: 4 ports detected [ 1050.020168] usb 1-2: new high-speed USB device number 18 using xhci_hcd [ 1050.181976] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 1050.181982] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1050.181986] usb 1-2: Product: 4-Port USB 2.0 Hub [ 1050.181989] usb 1-2: Manufacturer: Generic [ 1050.198154] hub 1-2:1.0: USB hub found [ 1050.199444] hub 1-2:1.0: 4 ports detected [ 1050.508575] usb 1-2.1: new low-speed USB device number 19 using xhci_hcd [ 1050.621195] usb 1-2.1: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00 [ 1050.621202] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1050.621205] usb 1-2.1: Product: USB OPTICAL MOUSE [ 1050.649518] input: USB OPTICAL MOUSE as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:093A:2521.0013/input/input39 [ 1050.651399] hid-generic 0003:093A:2521.0013: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0003:01:00.0-2.1/input0 [ 1050.736587] usb 1-2.2: new full-speed USB device number 20 using xhci_hcd [ 1050.849965] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c33c, bcdDevice=19.00 [ 1050.849970] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1050.849974] usb 1-2.2: Product: G513 Carbon Tactile [ 1050.849976] usb 1-2.2: Manufacturer: Logitech [ 1050.849978] usb 1-2.2: SerialNumber: 0A7837503930 [ 1050.876266] input: Logitech G513 Carbon Tactile as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C33C.0014/input/input40 [ 1050.937849] hid-generic 0003:046D:C33C.0014: input,hidraw1: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0003:01:00.0-2.2/input0 [ 1050.943194] input: Logitech G513 Carbon Tactile Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C33C.0015/input/input41 [ 1051.001152] input: Logitech G513 Carbon Tactile Consumer Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C33C.0015/input/input42 [ 1051.003200] hid-generic 0003:046D:C33C.0015: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech G513 Carbon Tactile] on usb-0003:01:00.0-2.2/input1 [ 1051.084534] usb 1-2.3: new full-speed USB device number 21 using xhci_hcd [ 1051.211707] usb 1-2.3: New USB device found, idVendor=0ccd, idProduct=00b1, bcdDevice= 0.10 [ 1051.211713] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1051.211717] usb 1-2.3: Product: Aureon 7.1 USB [ 1051.313002] usb 1-2.3: current rate 30464 is different from the runtime rate 96000 [ 1051.353258] usb 1-2.3: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 1051.353262] usb 1-2.3: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1 [ 1051.367931] usb 1-2.3: Warning! Unlikely big volume range (=8065), cval->res is probably wrong. [ 1051.367935] usb 1-2.3: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1 [ 1051.407251] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 1051.407255] usb 1-2.3: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1 [ 1051.420759] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 1051.420763] usb 1-2.3: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1 [ 1051.433254] usb 1-2.3: Warning! Unlikely big volume range (=6928), cval->res is probably wrong. [ 1051.433258] usb 1-2.3: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1 [ 1051.439937] input: Aureon 7.1 USB as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2.3/1-2.3:1.3/0003:0CCD:00B1.0016/input/input45 [ 1051.501753] hid-generic 0003:0CCD:00B1.0016: input,hidraw7: USB HID v1.00 Device [Aureon 7.1 USB] on usb-0003:01:00.0-2.3/input3