[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=c3dfcdb6-b1db-49a5-885a-d15bf429f6db ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffb7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bffb8000-0x00000000bffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M4N68T-M LE, BIOS 1102 06/12/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000240000000 aka 9216M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE [ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff] [ 0.000000] [mem 0x23fe00000-0x23fffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff] [ 0.000000] [mem 0x23c000000-0x23fdfffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] [ 0.000000] [mem 0x200000000-0x23bffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M [ 0.000000] [mem 0xbfe00000-0xbff9ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x35b9e000-0x36dc6fff] [ 0.000000] ACPI: RSDP 00000000000fb6d0 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bffa0100 00005C (v01 061210 XSDT1416 20100612 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bffa0290 0000F4 (v03 061210 FACP1416 20100612 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bffa0460 0079CA (v01 A1556 A1556000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bffb8000 000040 [ 0.000000] ACPI: APIC 00000000bffa0390 000090 (v01 061210 APIC1416 20100612 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bffa0420 00003C (v01 061210 OEMMCFG 20100612 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bffb8040 000071 (v01 061210 OEMB1416 20100612 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bffa7e30 0000C8 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000bffa7f00 000038 (v01 061210 OEMHPET0 20100612 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bffa7f40 000458 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x23fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x23fffffff] -> [mem 0x00000000-0x23fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x23fff9000-0x23fffdfff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0xbff9ffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] On node 0 totalpages: 2096954 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12223 pages used for memmap [ 0.000000] DMA32 zone: 782240 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbffb7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffb8000-0xbffdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbffedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffee000-0xbffeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023fc00000 s86336 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064166 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=c3dfcdb6-b1db-49a5-885a-d15bf429f6db ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ b7de000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 8089236K/8387816K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 298580K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-5. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2913.484 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5826.96 BogoMIPS (lpj=11653936) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000028] Security Framework initialized [ 0.000044] AppArmor: AppArmor initialized [ 0.000045] Yama: becoming mindful. [ 0.000731] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.003654] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004804] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004817] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.005056] Initializing cgroup subsys memory [ 0.005062] Initializing cgroup subsys devices [ 0.005064] Initializing cgroup subsys freezer [ 0.005066] Initializing cgroup subsys blkio [ 0.005067] Initializing cgroup subsys perf_event [ 0.005069] Initializing cgroup subsys hugetlb [ 0.005086] tseg: 0000000000 [ 0.005092] CPU: Physical Processor ID: 0 [ 0.005093] CPU: Processor Core ID: 0 [ 0.005095] mce: CPU supports 6 MCE banks [ 0.005100] LVT offset 0 assigned for vector 0xf9 [ 0.005104] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.005104] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.005104] tlb_flushall_shift: 4 [ 0.005189] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000) [ 0.005893] ACPI: Core revision 20131115 [ 0.008257] ACPI: All ACPI Tables successfully acquired [ 0.008636] ftrace: allocating 28408 entries in 111 pages [ 0.019818] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.059452] smpboot: CPU0: AMD Athlon(tm) II X2 245 Processor (fam: 10, model: 06, stepping: 02) [ 0.166972] Performance Events: AMD PMU driver. [ 0.166976] ... version: 0 [ 0.166977] ... bit width: 48 [ 0.166978] ... generic registers: 4 [ 0.166979] ... value mask: 0000ffffffffffff [ 0.166980] ... max period: 00007fffffffffff [ 0.166981] ... fixed-purpose events: 0 [ 0.166982] ... event mask: 000000000000000f [ 0.168411] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.168492] x86: Booting SMP configuration: [ 0.168493] .... node #0, CPUs: #1 [ 0.181529] x86: Booted up 1 node, 2 CPUs [ 0.181531] smpboot: Total of 2 processors activated (11653.93 BogoMIPS) [ 0.182183] devtmpfs: initialized [ 0.185321] EVM: security.selinux [ 0.185323] EVM: security.SMACK64 [ 0.185324] EVM: security.ima [ 0.185324] EVM: security.capability [ 0.185381] PM: Registering ACPI NVS region [mem 0xbffb8000-0xbffdffff] (163840 bytes) [ 0.186244] pinctrl core: initialized pinctrl subsystem [ 0.186317] regulator-dummy: no parameters [ 0.186353] RTC time: 19:41:10, date: 04/23/14 [ 0.186391] NET: Registered protocol family 16 [ 0.186490] cpuidle: using governor ladder [ 0.186491] cpuidle: using governor menu [ 0.186495] node 0 link 0: io port [1000, ffffff] [ 0.186497] TOM: 00000000c0000000 aka 3072M [ 0.186499] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.186501] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.186504] node 0 link 0: mmio [a0000, bffff] [ 0.186505] node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff] and [f0000000, fe0bffff] [ 0.186508] TOM2: 0000000240000000 aka 9216M [ 0.186510] bus: [bus 00-07] on node 0 link 0 [ 0.186511] bus: 00 [io 0x0000-0xffff] [ 0.186512] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.186513] bus: 00 [mem 0xc0000000-0xdfffffff] [ 0.186515] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.186516] bus: 00 [mem 0x240000000-0xfcffffffff] [ 0.186554] ACPI: bus type PCI registered [ 0.186556] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.186606] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.186609] PCI: not using MMCONFIG [ 0.186610] PCI: Using configuration type 1 for base access [ 0.186611] PCI: Using configuration type 1 for extended access [ 0.186770] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.186771] mtrr: probably your BIOS does not setup all CPUs. [ 0.186771] mtrr: corrected configuration. [ 0.187512] bio: create slab at 0 [ 0.187682] ACPI: Added _OSI(Module Device) [ 0.187684] ACPI: Added _OSI(Processor Device) [ 0.187685] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.187686] ACPI: Added _OSI(Processor Aggregator Device) [ 0.190032] ACPI: Executed 1 blocks of module-level executable AML code [ 0.257755] ACPI: Interpreter enabled [ 0.257766] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.257778] ACPI: (supports S0 S1 S3 S4 S5) [ 0.257780] ACPI: Using IOAPIC for interrupt routing [ 0.257798] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.258968] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.266910] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.267002] ACPI: No dock devices found. [ 0.272551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.272556] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.272677] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability] [ 0.272732] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.272735] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.272737] acpi PNP0A03:00: _OSC: platform willing to grant [PME AER] [ 0.272738] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.272934] PCI host bridge to bus 0000:00 [ 0.272937] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.272939] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.272941] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.272942] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.272944] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.272946] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 0.272947] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.272967] pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000 [ 0.273168] pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100 [ 0.273174] pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff] [ 0.273242] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500 [ 0.273252] pci 0000:00:01.1: reg 0x10: [io 0x0e00-0x0e3f] [ 0.273266] pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f] [ 0.273271] pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f] [ 0.273297] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.273329] pci 0000:00:01.1: System wakeup disabled by ACPI [ 0.273351] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000 [ 0.273414] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310 [ 0.273423] pci 0000:00:02.0: reg 0x10: [mem 0xdbffb000-0xdbffbfff] [ 0.273454] pci 0000:00:02.0: supports D1 D2 [ 0.273456] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.273480] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.273504] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320 [ 0.273514] pci 0000:00:02.1: reg 0x10: [mem 0xdbffac00-0xdbffacff] [ 0.273552] pci 0000:00:02.1: supports D1 D2 [ 0.273554] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.273581] pci 0000:00:02.1: System wakeup disabled by ACPI [ 0.273612] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401 [ 0.273661] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.273687] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300 [ 0.273697] pci 0000:00:05.0: reg 0x10: [mem 0xdbff4000-0xdbff7fff] [ 0.273735] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.273761] pci 0000:00:05.0: System wakeup disabled by ACPI [ 0.273789] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a [ 0.273809] pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf] [ 0.273868] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000 [ 0.273876] pci 0000:00:07.0: reg 0x10: [mem 0xdbff9000-0xdbff9fff] [ 0.273880] pci 0000:00:07.0: reg 0x14: [io 0xd480-0xd487] [ 0.273912] pci 0000:00:07.0: supports D1 D2 [ 0.273913] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.273940] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.273963] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185 [ 0.273970] pci 0000:00:08.0: reg 0x10: [io 0xd400-0xd407] [ 0.273974] pci 0000:00:08.0: reg 0x14: [io 0xd080-0xd083] [ 0.273977] pci 0000:00:08.0: reg 0x18: [io 0xd000-0xd007] [ 0.273981] pci 0000:00:08.0: reg 0x1c: [io 0xcc00-0xcc03] [ 0.273985] pci 0000:00:08.0: reg 0x20: [io 0xc880-0xc88f] [ 0.273989] pci 0000:00:08.0: reg 0x24: [mem 0xdbff8000-0xdbff8fff] [ 0.274044] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185 [ 0.274052] pci 0000:00:08.1: reg 0x10: [io 0xc800-0xc807] [ 0.274055] pci 0000:00:08.1: reg 0x14: [io 0xc480-0xc483] [ 0.274059] pci 0000:00:08.1: reg 0x18: [io 0xc400-0xc407] [ 0.274063] pci 0000:00:08.1: reg 0x1c: [io 0xc080-0xc083] [ 0.274066] pci 0000:00:08.1: reg 0x20: [io 0xc000-0xc00f] [ 0.274070] pci 0000:00:08.1: reg 0x24: [mem 0xdbfef000-0xdbfeffff] [ 0.274132] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400 [ 0.274156] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.274181] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.274206] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400 [ 0.274228] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.274252] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 0.274276] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400 [ 0.274298] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.274324] pci 0000:00:0c.0: System wakeup disabled by ACPI [ 0.274355] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.274400] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.274442] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.274483] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.274527] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.274623] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode) [ 0.274627] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.274629] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.274631] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.274632] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.274634] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.274636] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.274667] pci 0000:02:00.0: [10de:0640] type 00 class 0x030000 [ 0.274675] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff] [ 0.274683] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.274691] pci 0000:02:00.0: reg 0x1c: [mem 0xdc000000-0xddffffff 64bit] [ 0.274697] pci 0000:02:00.0: reg 0x24: [io 0xec00-0xec7f] [ 0.274702] pci 0000:02:00.0: reg 0x30: [mem 0xdef80000-0xdeffffff pref] [ 0.281213] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.281220] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.281223] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff] [ 0.281226] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.281278] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.281306] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.282023] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.282101] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.282176] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.282250] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.282324] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.282397] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.282471] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.282546] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11 [ 0.282621] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.282696] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.282771] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5 [ 0.282848] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.282922] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 0.282997] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.283071] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.283147] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 0.283221] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11 [ 0.283305] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.283400] ACPI: Enabled 1 GPEs in block 20 to 5F [ 0.283405] ACPI: \_SB_.PCI0: notify handler is installed [ 0.283439] Found 1 acpi root devices [ 0.283572] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.283574] vgaarb: loaded [ 0.283575] vgaarb: bridge control possible 0000:02:00.0 [ 0.283726] SCSI subsystem initialized [ 0.283790] libata version 3.00 loaded. [ 0.283807] ACPI: bus type USB registered [ 0.283821] usbcore: registered new interface driver usbfs [ 0.283828] usbcore: registered new interface driver hub [ 0.283879] usbcore: registered new device driver usb [ 0.284000] PCI: Using ACPI for IRQ routing [ 0.290021] PCI: pci_cache_line_size set to 64 bytes [ 0.290053] e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff] [ 0.290055] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff] [ 0.290143] NetLabel: Initializing [ 0.290144] NetLabel: domain hash size = 128 [ 0.290145] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.290154] NetLabel: unlabeled traffic allowed by default [ 0.290242] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.290247] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.290251] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.292411] Switched to clocksource hpet [ 0.297219] AppArmor: AppArmor Filesystem Enabled [ 0.297246] pnp: PnP ACPI init [ 0.297258] ACPI: bus type PNP registered [ 0.297311] pnp 00:00: [dma 4] [ 0.297333] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.297364] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.297381] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.297404] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.297883] pnp 00:04: [dma 0 disabled] [ 0.298041] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.298321] pnp 00:05: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff] [ 0.298323] pnp 00:05: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff] [ 0.298381] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.298383] system 00:05: [io 0x0800-0x080f] has been reserved [ 0.298386] system 00:05: [io 0x0500-0x057f] could not be reserved [ 0.298387] system 00:05: [io 0x0580-0x05ff] has been reserved [ 0.298389] system 00:05: [io 0x0800-0x087f] could not be reserved [ 0.298391] system 00:05: [io 0x0880-0x08ff] has been reserved [ 0.298393] system 00:05: [io 0x0d00-0x0d7f] has been reserved [ 0.298395] system 00:05: [io 0x0d80-0x0dff] has been reserved [ 0.298397] system 00:05: [io 0x1100-0x117f] has been reserved [ 0.298399] system 00:05: [io 0x1180-0x11ff] has been reserved [ 0.298401] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.298403] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.298405] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved [ 0.298407] system 00:05: [mem 0xfec80000-0x1fd93ffff] could not be reserved [ 0.298409] system 00:05: [mem 0xfefe0000-0xfefe01ff] has been reserved [ 0.298411] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved [ 0.298413] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.298416] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.298478] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.298540] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.298542] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.298544] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.298584] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.298714] system 00:09: [io 0x0230-0x023f] has been reserved [ 0.298717] system 00:09: [io 0x0290-0x029f] has been reserved [ 0.298719] system 00:09: [io 0x0a00-0x0a0f] has been reserved [ 0.298721] system 00:09: [io 0x0a30-0x0a3f] has been reserved [ 0.298723] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.299049] pnp 00:0a: [dma 0 disabled] [ 0.299107] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.299159] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.299162] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.299281] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.299284] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.299286] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.299288] system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.299290] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.299292] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.299480] pnp: PnP ACPI: found 13 devices [ 0.299481] ACPI: bus type PNP unregistered [ 0.305750] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.305756] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.305758] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.305761] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff] [ 0.305763] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.305766] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.305770] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.305775] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.305777] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.305779] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.305780] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.305782] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.305784] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.305786] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.305787] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.305789] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.305791] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.305793] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.305794] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.305796] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.305798] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdfffffff] [ 0.305800] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.305828] NET: Registered protocol family 2 [ 0.305973] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.306160] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.306425] TCP: Hash tables configured (established 65536 bind 65536) [ 0.306469] TCP: reno registered [ 0.306480] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.306529] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.306635] NET: Registered protocol family 1 [ 0.306873] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 0.376564] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.376671] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.376716] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.376770] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.376822] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.376874] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.376929] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.376988] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.377051] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.377069] pci 0000:02:00.0: Boot video device [ 0.377071] PCI: CLS 64 bytes, default 64 [ 0.377141] Trying to unpack rootfs image as initramfs... [ 0.648673] Freeing initrd memory: 18596K (ffff880035b9e000 - ffff880036dc7000) [ 0.648872] PCI-DMA: Disabling AGP. [ 0.650302] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.650303] PCI-DMA: using GART IOMMU. [ 0.650305] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.653167] LVT offset 1 assigned for vector 0x400 [ 0.653176] IBS: LVT offset 1 assigned [ 0.653199] perf: AMD IBS detected (0x0000001f) [ 0.653239] microcode: CPU0: patch_level=0x010000b7 [ 0.653252] microcode: CPU1: patch_level=0x010000b7 [ 0.653318] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.653319] Scanning for low memory corruption every 60 seconds [ 0.653555] Initialise system trusted keyring [ 0.653596] audit: initializing netlink socket (disabled) [ 0.653607] type=2000 audit(1398282070.548:1): initialized [ 0.676182] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.677651] VFS: Disk quotas dquot_6.5.2 [ 0.677700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.678173] fuse init (API version 7.22) [ 0.678290] msgmni has been set to 15964 [ 0.678345] Key type big_key registered [ 0.678713] Key type asymmetric registered [ 0.678715] Asymmetric key parser 'x509' registered [ 0.678742] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.678770] io scheduler noop registered [ 0.678771] io scheduler deadline registered (default) [ 0.678793] io scheduler cfq registered [ 0.678882] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.678919] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X [ 0.678953] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X [ 0.678991] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.679002] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.679034] vesafb: mode is 1600x900x32, linelength=6400, pages=0 [ 0.679035] vesafb: scrolling: redraw [ 0.679037] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.679235] vesafb: framebuffer at 0xdd000000, mapped to 0xffffc90010e80000, using 5632k, total 5632k [ 0.693454] Console: switching to colour frame buffer device 200x56 [ 0.707513] fb0: VESA VGA frame buffer device [ 0.707589] ipmi message handler version 39.2 [ 0.707674] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.707677] ACPI: Power Button [PWRB] [ 0.707710] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.707712] ACPI: Power Button [PWRF] [ 0.708213] GHES: HEST is not enabled! [ 0.708296] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.728622] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.729793] Linux agpgart interface v0.103 [ 0.731046] brd: module loaded [ 0.731854] loop: module loaded [ 0.732175] libphy: Fixed MDIO Bus: probed [ 0.732248] tun: Universal TUN/TAP device driver, 1.6 [ 0.732249] tun: (C) 1999-2004 Max Krasnyansky [ 0.732315] PPP generic driver version 2.4.2 [ 0.732353] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.732356] ehci-pci: EHCI PCI platform driver [ 0.732450] ehci-pci 0000:00:02.1: EHCI Host Controller [ 0.732455] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.732463] ehci-pci 0000:00:02.1: debug port 1 [ 0.732494] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 0.732514] ehci-pci 0000:00:02.1: irq 22, io mem 0xdbffac00 [ 0.743813] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.743889] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.743891] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.743893] usb usb1: Product: EHCI Host Controller [ 0.743894] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd [ 0.743896] usb usb1: SerialNumber: 0000:00:02.1 [ 0.744022] hub 1-0:1.0: USB hub found [ 0.744028] hub 1-0:1.0: 10 ports detected [ 0.744175] ehci-platform: EHCI generic platform driver [ 0.744185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.744186] ohci-pci: OHCI PCI platform driver [ 0.744277] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 0.744281] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.744307] ohci-pci 0000:00:02.0: irq 23, io mem 0xdbffb000 [ 0.801752] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.801756] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.801758] usb usb2: Product: OHCI PCI host controller [ 0.801759] usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd [ 0.801760] usb usb2: SerialNumber: 0000:00:02.0 [ 0.801902] hub 2-0:1.0: USB hub found [ 0.801909] hub 2-0:1.0: 10 ports detected [ 0.802055] ohci-platform: OHCI generic platform driver [ 0.802066] uhci_hcd: USB Universal Host Controller Interface driver [ 0.802126] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.802127] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.802277] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.802395] mousedev: PS/2 mouse device common for all mice [ 0.802502] rtc_cmos 00:01: RTC can wake from S4 [ 0.802671] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.802707] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.802760] device-mapper: uevent: version 1.0.3 [ 0.802845] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.802851] ledtrig-cpu: registered to indicate activity on CPUs [ 0.802934] TCP: cubic registered [ 0.803006] NET: Registered protocol family 10 [ 0.803157] NET: Registered protocol family 17 [ 0.803164] Key type dns_resolver registered [ 0.803396] Loading compiled-in X.509 certificates [ 0.804349] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431' [ 0.804362] registered taskstats version 1 [ 0.806655] Key type trusted registered [ 0.808501] Key type encrypted registered [ 0.810082] AppArmor: AppArmor sha1 policy hashing enabled [ 0.810085] IMA: No TPM chip found, activating TPM-bypass! [ 0.810258] regulator-dummy: disabling [ 0.810301] Magic number: 10:863:698 [ 0.810414] rtc_cmos 00:01: setting system clock to 2014-04-23 19:41:11 UTC (1398282071) [ 0.810502] acpi-cpufreq: overriding BIOS provided _PSD data [ 0.810754] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.810756] EDD information not available. [ 0.810783] PM: Hibernation image not present or could not be loaded. [ 0.812109] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000) [ 0.812113] Write protecting the kernel read-only data: 12288k [ 0.814321] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000) [ 0.816080] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000) [ 0.825221] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.832794] systemd-udevd[106]: starting version 204 [ 0.849821] pata_amd 0000:00:06.0: version 0.4.1 [ 0.851781] scsi0 : pata_amd [ 0.853259] scsi1 : pata_amd [ 0.853300] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.853302] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.857136] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.857342] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 0.920573] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 20:cf:30:e0:71:48 [ 0.920578] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 [ 0.920652] sata_nv 0000:00:08.0: version 3.5 [ 0.920868] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20 [ 0.921162] scsi2 : sata_nv [ 0.921216] scsi3 : sata_nv [ 0.921242] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20 [ 0.921244] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20 [ 0.921421] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23 [ 0.921641] scsi4 : sata_nv [ 0.921892] scsi5 : sata_nv [ 0.921931] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23 [ 0.921933] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23 [ 1.015772] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66 [ 1.015780] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11) [ 1.031694] ata1.00: configured for UDMA/66 [ 1.034022] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.00 PQ: 0 ANSI: 5 [ 1.036185] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.036190] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.036314] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.036369] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.036495] ata2: port disabled--ignoring [ 1.111329] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 1.243711] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101 [ 1.243715] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.243717] usb 1-3: Product: USB 2.0 Hub [MTT] [ 1.244006] hub 1-3:1.0: USB hub found [ 1.244059] hub 1-3:1.0: 4 ports detected [ 1.354980] usb 1-4: new high-speed USB device number 4 using ehci-pci [ 1.386928] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.386932] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.395114] ata5.00: ATA-7: SAMSUNG HD322HJ, 1AG01118, max UDMA7 [ 1.395117] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.403102] ata5.00: configured for UDMA/133 [ 1.441137] ata3.00: ATA-7: MAXTOR STM3160211AS, 3.AAE, max UDMA/133 [ 1.441141] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.503860] usb 1-4: New USB device found, idVendor=07d1, idProduct=3c16 [ 1.503864] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.503866] usb 1-4: Product: 11n Adapter [ 1.503868] usb 1-4: Manufacturer: Ralink [ 1.503869] usb 1-4: SerialNumber: 1.0 [ 1.507668] ata3.00: configured for UDMA/133 [ 1.507861] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5 [ 1.508023] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.508083] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.508152] sd 2:0:0:0: [sda] Write Protect is off [ 1.508154] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.508187] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.582689] sda: sda1 sda2 < sda5 > [ 1.583001] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.614591] usb 1-7: new high-speed USB device number 5 using ehci-pci [ 1.650528] tsc: Refined TSC clocksource calibration: 2913.248 MHz [ 1.747623] usb 1-7: New USB device found, idVendor=14cd, idProduct=8168 [ 1.747626] usb 1-7: New USB device strings: Mfr=1, Product=3, SerialNumber=2 [ 1.747628] usb 1-7: Product: USB Mass Storage Device [ 1.747629] usb 1-7: Manufacturer: USB Reader [ 1.747631] usb 1-7: SerialNumber: 816820090724 [ 1.750695] usb-storage 1-7:1.0: USB Mass Storage device detected [ 1.750893] scsi6 : usb-storage 1-7:1.0 [ 1.750971] usbcore: registered new interface driver usb-storage [ 1.974089] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.982421] ata4.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133 [ 1.982425] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.014359] ata4.00: configured for UDMA/133 [ 2.014546] scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5 [ 2.014691] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2.014762] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.014767] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 2.014789] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AG0 PQ: 0 ANSI: 5 [ 2.014811] sd 3:0:0:0: [sdb] Write Protect is off [ 2.014813] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.014830] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.014868] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.014881] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 2.014908] sd 4:0:0:0: [sdc] Write Protect is off [ 2.014910] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.014926] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.017504] sdc: sdc1 sdc2 [ 2.017790] sd 4:0:0:0: [sdc] Attached SCSI disk [ 2.043150] sdb: sdb1 [ 2.043410] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.049969] usb 2-1: new low-speed USB device number 2 using ohci-pci [ 2.259732] usb 2-1: New USB device found, idVendor=045e, idProduct=0797 [ 2.259737] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.259739] usb 2-1: Product: USB Optical Mouse [ 2.265784] hidraw: raw HID events driver (C) Jiri Kosina [ 2.273962] usbcore: registered new interface driver usbhid [ 2.273966] usbhid: USB HID core driver [ 2.276645] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input3 [ 2.276777] hid-generic 0003:045E:0797.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-1/input0 [ 2.333685] usb 1-3.1: new full-speed USB device number 6 using ehci-pci [ 2.426799] usb 1-3.1: New USB device found, idVendor=07b3, idProduct=040b [ 2.426803] usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.426806] usb 1-3.1: Product: 600DPI USB Scanner [ 2.485363] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.493453] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN00, max UDMA/133 [ 2.497446] usb 1-3.2: new full-speed USB device number 7 using ehci-pci [ 2.509428] ata6.00: configured for UDMA/133 [ 2.517160] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LN00 PQ: 0 ANSI: 5 [ 2.526741] sr1: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.526881] sr 5:0:0:0: Attached scsi CD-ROM sr1 [ 2.527012] sr 5:0:0:0: Attached scsi generic sg4 type 5 [ 2.591940] usb 1-3.2: New USB device found, idVendor=093a, idProduct=2620 [ 2.591945] usb 1-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.649178] Switched to clocksource tsc [ 2.749865] scsi 6:0:0:0: Direct-Access USB Mass Storage Device PQ: 0 ANSI: 0 CCS [ 2.750128] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 2.751730] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 3.222920] random: nonblocking pool is initialized [ 3.403495] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 14.772674] Adding 8386556k swap on /dev/sda5. Priority:-1 extents:1 across:8386556k FS [ 14.888433] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.982667] systemd-udevd[286]: starting version 204 [ 15.216299] lp: driver loaded but no devices found [ 15.228805] ppdev: user-space parallel port driver [ 15.232395] parport_pc 00:04: reported by Plug and Play ACPI [ 15.232441] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 15.258133] ACPI Warning: 0x0000000000000600-0x000000000000063f SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20131115/utaddress-251) [ 15.258140] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.258184] i2c i2c-0: nForce2 SMBus adapter at 0x700 [ 15.289942] [drm] Initialized drm 1.1.0 20060810 [ 15.314349] MCE: In-kernel MCE decoding enabled. [ 15.317545] EDAC MC: Ver: 3.0.0 [ 15.324588] AMD64 EDAC driver v3.4.0 [ 15.324626] EDAC amd64: DRAM ECC disabled. [ 15.324631] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 15.324631] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 15.324631] (Note that use of the override may cause unknown side effects.) [ 15.331301] lp0: using parport0 (interrupt-driven). [ 15.339615] wmi: Mapper loaded [ 15.374001] checking generic (dd000000 580000) vs hw (c0000000 10000000) [ 15.374006] checking generic (dd000000 580000) vs hw (dc000000 2000000) [ 15.374007] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver [ 15.374027] Console: switching to colour dummy device 80x25 [ 15.374404] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 [ 15.374553] [drm] hdmi device not found 2 0 1 [ 15.374612] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x096000c1 [ 15.374614] nouveau [ DEVICE][0000:02:00.0] Chipset: G96 (NV96) [ 15.374616] nouveau [ DEVICE][0000:02:00.0] Family : NV50 [ 15.377362] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image... [ 15.430009] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid [ 15.430011] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN [ 15.430138] nouveau [ VBIOS][0000:02:00.0] BIT signature found [ 15.430140] nouveau [ VBIOS][0000:02:00.0] version 62.94.90.00.00 [ 15.450781] nouveau 0000:02:00.0: irq 43 for MSI/MSI-X [ 15.450799] nouveau [ PMC][0000:02:00.0] MSI interrupts enabled [ 15.450827] nouveau [ PFB][0000:02:00.0] RAM type: DDR2 [ 15.450828] nouveau [ PFB][0000:02:00.0] RAM size: 1024 MiB [ 15.450830] nouveau [ PFB][0000:02:00.0] ZCOMP: 2048 tags [ 15.453787] nouveau [ VOLT][0000:02:00.0] GPU voltage: 1100000uv [ 15.487522] kvm: Nested Virtualization enabled [ 15.487528] kvm: Nested Paging enabled [ 15.504405] nouveau [ PTHERM][0000:02:00.0] FAN control: none / external [ 15.504417] nouveau [ PTHERM][0000:02:00.0] fan management: automatic [ 15.504482] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes [ 15.504900] nouveau [ CLK][0000:02:00.0] 0f: core 550 MHz shader 1375 MHz memory 400 MHz [ 15.504991] nouveau [ CLK][0000:02:00.0] --: core 400 MHz shader 800 MHz memory 399 MHz [ 15.507476] [TTM] Zone kernel: Available graphics memory: 4088350 kiB [ 15.507480] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 15.507481] [TTM] Initializing pool allocator [ 15.507487] [TTM] Initializing DMA pool allocator [ 15.507501] nouveau [ DRM] VRAM: 1024 MiB [ 15.507503] nouveau [ DRM] GART: 1048576 MiB [ 15.507507] nouveau [ DRM] TMDS table version 2.0 [ 15.507508] nouveau [ DRM] DCB version 4.0 [ 15.507510] nouveau [ DRM] DCB outp 00: 02000300 00000028 [ 15.507513] nouveau [ DRM] DCB outp 01: 02000302 00020030 [ 15.507514] nouveau [ DRM] DCB outp 02: 04011310 00000028 [ 15.507516] nouveau [ DRM] DCB outp 03: 01022332 00020010 [ 15.507526] nouveau [ DRM] DCB conn 00: 00002030 [ 15.507528] nouveau [ DRM] DCB conn 01: 00000100 [ 15.507529] nouveau [ DRM] DCB conn 02: 00001261 [ 15.514444] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 15.514446] [drm] No driver support for vblank timestamp query. [ 15.523292] nouveau [ DRM] MM: using CRYPT for buffer copies [ 15.565960] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 15.565971] hda_intel: Disabling MSI [ 15.565992] hda-intel 0000:00:05.0: Disabling 64bit DMA [ 15.582887] hda-intel 0000:00:05.0: Enable delay in RIRB handling [ 15.582917] nouveau [ DRM] allocated 1600x900 fb: 0x70000, bo ffff880035a6a000 [ 15.584089] fbcon: nouveaufb (fb0) is primary device [ 15.620810] WARNING! power/level is deprecated; use power/control instead [ 15.623653] type=1400 audit(1398292886.332:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=357 comm="apparmor_parser" [ 15.623658] type=1400 audit(1398292886.332:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=357 comm="apparmor_parser" [ 15.623660] type=1400 audit(1398292886.332:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=357 comm="apparmor_parser" [ 15.624083] type=1400 audit(1398292886.332:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=357 comm="apparmor_parser" [ 15.624086] type=1400 audit(1398292886.332:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=357 comm="apparmor_parser" [ 15.624305] type=1400 audit(1398292886.332:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=357 comm="apparmor_parser" [ 15.626132] type=1400 audit(1398292886.332:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=414 comm="apparmor_parser" [ 15.626137] type=1400 audit(1398292886.332:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=414 comm="apparmor_parser" [ 15.626141] type=1400 audit(1398292886.332:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=414 comm="apparmor_parser" [ 15.626565] type=1400 audit(1398292886.332:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=414 comm="apparmor_parser" [ 15.642636] Console: switching to colour frame buffer device 200x56 [ 15.643812] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device [ 15.643813] nouveau 0000:02:00.0: registered panic notifier [ 15.645814] [drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 0 [ 16.110026] autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line [ 16.110030] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 16.110032] hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 16.110033] mono: mono_out=0x0 [ 16.110034] dig-out=0x20/0x0 [ 16.110035] inputs: [ 16.110036] Rear Mic=0x1a [ 16.110037] Front Mic=0x1e [ 16.110038] Line=0x1b [ 16.275264] cfg80211: Calling CRDA to update world regulatory domain [ 16.285603] Linux video capture interface: v2.00 [ 16.289807] gspca_main: v2.14.0 registered [ 16.292205] gspca_main: gspca_pac7302-2.14.0 probing 093a:2620 [ 16.294456] input: gspca_pac7302 as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.2/input/input4 [ 16.294615] usbcore: registered new interface driver gspca_pac7302 [ 16.313236] usbcore: registered new interface driver snd-usb-audio [ 16.413618] usb 1-4: reset high-speed USB device number 4 using ehci-pci [ 16.555866] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 16.583965] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 16.589290] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 16.589814] usbcore: registered new interface driver rt2800usb [ 16.801285] cfg80211: World regulatory domain updated: [ 16.801290] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 16.801292] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.801294] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.801295] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.801296] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.801298] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.853071] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9 [ 16.853176] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input8 [ 16.853234] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7 [ 16.853294] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6 [ 16.853347] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input5 [ 20.818549] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 21.293805] init: failsafe main process (714) killed by TERM signal [ 21.540128] Bluetooth: Core ver 2.17 [ 21.540148] NET: Registered protocol family 31 [ 21.540150] Bluetooth: HCI device and connection manager initialized [ 21.540157] Bluetooth: HCI socket layer initialized [ 21.540159] Bluetooth: L2CAP socket layer initialized [ 21.540163] Bluetooth: SCO socket layer initialized [ 21.553376] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.553380] Bluetooth: BNEP filters: protocol multicast [ 21.553390] Bluetooth: BNEP socket layer initialized [ 21.567049] Bluetooth: RFCOMM TTY layer initialized [ 21.567061] Bluetooth: RFCOMM socket layer initialized [ 21.567068] Bluetooth: RFCOMM ver 1.11 [ 21.630400] audit_printk_skb: 6 callbacks suppressed [ 21.630404] type=1400 audit(1398292892.348:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=840 comm="apparmor_parser" [ 21.630410] type=1400 audit(1398292892.348:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=840 comm="apparmor_parser" [ 21.630826] type=1400 audit(1398292892.348:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=840 comm="apparmor_parser" [ 21.792494] type=1400 audit(1398292892.508:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=856 comm="apparmor_parser" [ 21.792503] type=1400 audit(1398292892.508:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=856 comm="apparmor_parser" [ 21.792507] type=1400 audit(1398292892.508:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=856 comm="apparmor_parser" [ 21.792923] type=1400 audit(1398292892.508:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=856 comm="apparmor_parser" [ 21.792927] type=1400 audit(1398292892.508:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=856 comm="apparmor_parser" [ 21.793149] type=1400 audit(1398292892.508:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=856 comm="apparmor_parser" [ 21.796690] type=1400 audit(1398292892.512:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=855 comm="apparmor_parser" [ 22.247946] init: cups main process (841) killed by HUP signal [ 22.247958] init: cups main process ended, respawning [ 24.377772] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 24.381805] vboxdrv: Found 2 processor cores. [ 24.383605] vboxdrv: fAsync=0 offMin=0x344 offMax=0xc28 [ 24.383698] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 24.383700] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). [ 24.401081] vboxpci: IOMMU not found (not registered) [ 25.175032] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 25.518916] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 25.855277] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.855662] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.857891] forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X [ 25.857919] forcedeth 0000:00:07.0 eth0: MSI enabled [ 25.858134] forcedeth 0000:00:07.0 eth0: no link during initialization [ 25.858560] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.858973] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.932254] init: samba-ad-dc main process (1138) terminated with status 1 [ 26.264707] init: plymouth-upstart-bridge main process ended, respawning [ 26.269838] init: plymouth-upstart-bridge main process (1178) terminated with status 1 [ 26.269852] init: plymouth-upstart-bridge main process ended, respawning [ 28.549796] wlan0: authenticate with 00:1d:0f:cd:1c:22 [ 28.597747] wlan0: send auth to 00:1d:0f:cd:1c:22 (try 1/3) [ 28.599344] wlan0: authenticated [ 28.599607] rt2800usb 1-4:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 28.599610] rt2800usb 1-4:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 28.599611] rt2800usb 1-4:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 28.600444] wlan0: associate with 00:1d:0f:cd:1c:22 (try 1/3) [ 28.602327] wlan0: RX AssocResp from 00:1d:0f:cd:1c:22 (capab=0x31 status=0 aid=3) [ 28.608810] wlan0: associated [ 28.608850] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 28.608905] cfg80211: Calling CRDA for country: CA [ 28.612709] cfg80211: Regulatory domain changed to country: CA [ 28.612713] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 28.612715] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 28.612716] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 28.612717] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.612719] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.612720] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 28.614477] wlan0: deauthenticating from 00:1d:0f:cd:1c:22 by local choice (reason=2) [ 28.643682] cfg80211: Calling CRDA to update world regulatory domain [ 28.643931] wlan0: authenticate with 00:1d:0f:cd:1c:22 [ 28.647425] wlan0: send auth to 00:1d:0f:cd:1c:22 (try 1/3) [ 28.647603] cfg80211: World regulatory domain updated: [ 28.647608] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 28.647610] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.647612] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.647613] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.647614] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.647616] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.649135] wlan0: authenticated [ 28.649299] rt2800usb 1-4:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 28.649304] rt2800usb 1-4:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 28.649306] rt2800usb 1-4:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 28.652252] wlan0: associate with 00:1d:0f:cd:1c:22 (try 1/3) [ 28.654383] wlan0: RX AssocResp from 00:1d:0f:cd:1c:22 (capab=0x31 status=0 aid=3) [ 28.664713] wlan0: associated [ 28.664765] cfg80211: Calling CRDA for country: CA [ 28.667228] cfg80211: Regulatory domain changed to country: CA [ 28.667232] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 28.667234] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 28.667235] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 28.667237] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.667238] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.667239] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 32.445485] audit_printk_skb: 132 callbacks suppressed [ 32.445489] type=1400 audit(1398292903.176:68): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/etc/dconf/profile/gdm" pid=1441 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=115 ouid=0 [ 38.653844] wlan0: deauthenticating from 00:1d:0f:cd:1c:22 by local choice (reason=3) [ 38.680510] cfg80211: Calling CRDA to update world regulatory domain [ 38.683338] cfg80211: World regulatory domain updated: [ 38.683342] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 38.683344] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 38.683346] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 38.683347] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 38.683348] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 38.683350] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 40.061122] wlan0: authenticate with 00:1d:0f:cd:1c:22 [ 40.093675] wlan0: send auth to 00:1d:0f:cd:1c:22 (try 1/3) [ 40.095802] wlan0: authenticated [ 40.095969] rt2800usb 1-4:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 40.095990] rt2800usb 1-4:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 40.095995] rt2800usb 1-4:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 40.100019] wlan0: associate with 00:1d:0f:cd:1c:22 (try 1/3) [ 40.101785] wlan0: RX AssocResp from 00:1d:0f:cd:1c:22 (capab=0x31 status=0 aid=3) [ 40.108109] wlan0: associated [ 40.108171] cfg80211: Calling CRDA for country: CA [ 40.110733] cfg80211: Regulatory domain changed to country: CA [ 40.110737] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 40.110739] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 40.110740] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 40.110742] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 40.110743] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 40.110744] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 51.658081] type=1400 audit(1398292921.746:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1667 comm="apparmor_parser" [ 51.658090] type=1400 audit(1398292921.746:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1667 comm="apparmor_parser" [ 51.658525] type=1400 audit(1398292921.746:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1667 comm="apparmor_parser" [ 1071.420554] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 1071.601833] ISOFS: changing to secondary root [ 1181.618539] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2 [ 1181.618581] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2 [ 1181.618595] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2 [ 1181.618616] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2 [ 1181.618625] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2 [ 1181.618633] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2 [ 1181.629555] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping [ 1181.715713] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping [ 1181.715801] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping [ 1181.715909] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping