Debian Etch 2.6.25 kernel compile error
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
truecrypt-installer |
Fix Released
|
Medium
|
Jari Aalto |
Bug Description
On behalf
http://
by Anonymous (79.97.xx.xx) on Tue 12 Aug 2008 at 22:40
--------------
Hi, am having problems compiling this on Etch 2.6.25
Here are the last few lines and the errors messages I am getting:
if [ -d /usr/src/
if [ ! -f /usr/src/
echo "" >&2; \
echo "******
echo "[NOTE] Kernel has no .config file." >&2; \
echo "******
echo "Press RETURN to continue and for" \
"all subsequent questions."; >&2; \
if [ -f /boot/config-
cp /boot/config-
else \
make -C /usr/src/
fi; \
if ! grep -qE 'CONFIG_BLK_DEV_DM' /usr/src/
echo "[WARN] CONFIG_BLK_DEV_DM is not enabled." \
" Trying to fix." >&2; \
echo "CONFIG_
fi; \
cp /usr/src/
fi; \
if [ ! -h /usr/src/
echo "[NOTE] Kernel sources not prepared; doing it now." ; \
make -C /usr/src/
fi; \
fi
[NOTE] Kernel sources not prepared; doing it now.
make[1]: Entering directory `/usr/src/
scripts/
*
* Restart config...
*
*
* SCSI low-level drivers
*
SCSI low-level drivers (SCSI_LOWLEVEL) [Y/n] y
iSCSI Initiator over TCP/IP (ISCSI_TCP) [M/n/?] m
3ware 5/6/7/8xxx ATA-RAID support (BLK_DEV_
3ware 9xxx SATA-RAID support (SCSI_3W_9XXX) [M/n/?] m
ACARD SCSI support (SCSI_ACARD) [N/m/?] (NEW) aborted!
Console input/output is redirected. Run 'make oldconfig' to update configuration.
make[3]: *** [silentoldconfig] Error 1
make[2]: *** [silentoldconfig] Error 2
make[1]: *** No rule to make target `include/
make[1]: Leaving directory `/usr/src/
make: *** [kernel-prepare] Error 2
debuild: fatal error at line 1228:
Any advice?
debian/rules build failed
At the kernel preparation phase:
3ware 9xxx SATA-RAID support (SCSI_3W_9XXX) [M/n/?] m
ACARD SCSI support (SCSI_ACARD) [N/m/?] (NEW) aborted!
It looks like from the message "aborted!" that Control-C was pressed by user to cancel the
kernel configuration. To verify this, further information is needed from the original submitter.
POSSIBLE REMEDY
Press ENTER/RETURN key on every question the Kernel configuration needs.
This phase is not controlled by tc-installer, but it calls the kernel scripts,
which prepares the needed things.