cherry pick https://review.opendev.org/c/starlingx/rook-ceph/+/783584/ build and deploy failed

[Yong Fu]

Brief Description
-----------------
After cherry pick https://review.opendev.org/c/starlingx/rook-ceph/+/783584/, build angd deploying mutil-node(2+2+2 virtual) failed.

engineer build issue.

stx-openstack apply failed.

Reproducibility
---------------
100% reproducible

[chen haochuan (martin1982)]

In the attachment, there is no lablel openstack-control-plane on controller-0, which makes openstack apply fail.

Please ensure the host deployment correct. And use "fm alarm-list" to ensure there is no alarm, and host-list to ensure hosts are all available, before apply openstack

[Yong Fu (fuyong)]

I'm sure, configure label 'openstack-control-plane'
step by step
https://docs.starlingx.io/deploy_install_guides/r5_release/virtual/dedicated_storage_install_kubernetes.html

[chen haochuan (martin1982)]

Please check the snapshot in attachment

[Weiyuan.Wang-Neu (weiyuan-wang)]

I tried to deploy using the base code from master, and found a problem when config data network for work nodes:

The the names of devices for data network are generally eth1000 and eth1001, but they changed to eth0 and eth1 on work-0 and eth1 and eth2 on work-1 when using the iso built by the base.

So I modified the auto-deploy script and deployed the cherry-pick version ( https://review.opendev.org/c/starlingx/rook-ceph/+/783584/) again.

The result is OK.

I think the reason for the previous failure was that the network device name was incorrect and failed to config the data network.

[zhao.shuai (zhao.shuai.neusoft)]

Maybe this is the test method issue, If not see this problem anymore.
Please close this LP ticket. @FuYong. @WangWeiyuan