Reviewed:  https://review.opendev.org/716148
Committed: https://git.openstack.org/cgit/starlingx/metal/commit/?id=5d064c51333cc8acebbb5c837b6df2cf767e5d3f
Submitter: Zuul
Branch:    f/centos8

commit 041049063e81c17d9c513a10dca9f073139a979b
Author: Don Penney <email address hidden>
Date:   Wed Feb 5 14:36:43 2020 -0500

    Update pxeboot kickstart to allow for hybrid install
    
    The generated pxeboot kickstart templates that are included in the
    installation ISO will be used by the gen-bootloader-iso.sh in setting
    up a hybrid ISO/network installation, where the kernel and initrd are
    loaded from ISO, but the rootfs, kickstart, and software repositories
    are accessed via http/https. In order to support this installation,
    the pxeboot kickstart is updated to allow for the case where the
    BOOTIF cmdline parameter is not set (ie. node booted from ISO rather
    than network).
    
    This update also adds a check to the pxeboot kickstart to mount the
    installation media if in this scenario. In the case where a controller
    has been booted from an ISO with installation media accessed from the
    network, dracut does not mount the ISO. This results in the 'reboot
    --eject' in the kickstart being ignored, and when the newly installed
    node is rebooted, it may just boot the ISO again. By mounting the
    media in this case, Anaconda will eject it as expected.
    
    Story: 2006980
    Task: 38466
    
    Change-Id: I9330a2d50b8966a2b3f2b59cabec20f084372d8c
    Signed-off-by: Don Penney <email address hidden>

commit da7b2e94f136fa9faf7ff691f175b2ca9b1605b1
Author: Eric MacDonald <email address hidden>
Date:   Mon Feb 10 10:15:56 2020 -0500

    Modify Mtce Reinstall FSM to first power-off BMC provisioned hosts
    
    This update only applies to servers that support and are provisioned
    for Board Management Control (BMC).
    
    The BMC of some servers silently reject the 'set next boot device',
    a command while it is executing BIOS.
    
    The current reinstall algorithm when the BMC is provisioned starts by
    detecting the power state of the target server. If the power is off
    it will 'first power it on' and then proceed to 'set next boot device'
    to pxe followed by a reset. For the initial power off state case, the
    timing of these operations is such that the server is in BIOS when the
    'set next boot device' command is issued.
    
    This update modifies the host reinstall algorithm to first power-off
    a server followed by setting the next boot device while the server is
    confirmed to be powered off, then powered on. This ensures the server
    gets and handles the set next boot device command operation properly.
    
    This update also fixes a race condition between the bmc_handler and
    power_handler by moving the final power state update in the power
    handler to the power done phase.
    
    Test Plan:
    
    Verify all new reinstall failure path handling via fault insertion testing
    Verify reinstall of powered off host
    Verify reinstall of powered on host
    Verify reinstall of Wildcat server with ipmi
    Verify reinstall of Supermicro server with ipmi and redfish
    Verify reinstall of Ironpass server with ipmi
    Verify reinstall of WolfPass server with redfish and ipmi
    Verify reinstall of Dell server with ipmi
    
    Over 30 reinstalls were performed across all server types, with initial
    power on and off using both ipmi and redfish (where supported).
    
    Change-Id: Iefb17e9aa76c45f2ceadf83f23b1231ae82f000f
    Closes-Bug: 1862065
    Signed-off-by: Eric MacDonald <email address hidden>

commit d75d427c11db3ec2f225a8dd1e3a2ec5a008e96f
Author: Kristal Dale <email address hidden>
Date:   Wed Jan 15 13:35:52 2020 -0800

    Update landing pages for docs, api-ref, and release notes:
    
    - Use updated project name in titles/text
    - Correct text for link to Storyboard (docs)
    - Correct capitalization in section headings
    - Correct formatting for section headings
    - Update project name in link to release notes, api-ref
    - Update project name in config for docs/releasenotes/api-ref
    
    patch 5: Update to use 'Metal' instead of 'Bare Metal' per comments
    
    Story:2007193
    Task:38340
    
    Change-Id: I22aa2f15850d4b5ecf01fd78c015b772b87a4932
    Signed-off-by: Kristal Dale <email address hidden>

commit 932d7df90ac5a393355025d1477b118f4b3a8c0d
Author: Bin Qian <email address hidden>
Date:   Thu Feb 6 11:33:54 2020 -0500

    Adding job to upload commits to GitHub
    
    Add job to publish metal repo to GitHub
    
    Change-Id: Ic122ad2490ae5d13dfd7a0b937d854ca46d861b3
    Story: 2007252
    Task: 38685
    Signed-off-by: Bin Qian <email address hidden>