[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-13-server (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #22-Ubuntu SMP Wed Nov 2 15:09:08 UTC 2011 (Ubuntu 3.0.0-13.22-server 3.0.6) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-server root=UUID=338f05b6-6307-4f1a-a8b6-9b12a0edc5ee ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afcf1000 (usable) [ 0.000000] BIOS-e820: 00000000afcf1000 - 00000000afdcf000 (reserved) [ 0.000000] BIOS-e820: 00000000afdcf000 - 00000000afecf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afecf000 - 00000000afeff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afeff000 - 00000000aff00000 (usable) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP 625/1475, BIOS 68DVA Ver. F.06 12/07/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back [ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 4 base 000200000000 mask FFFFC0000000 write-back [ 0.000000] 5 base 0000FFE00000 mask FFFFFFE00000 write-protect [ 0.000000] 6 base 0000FFF40000 mask FFFFFFFF0000 write-protect [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000240000000 aka 9216M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000aff00000 [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00aff00000 page 4k [ 0.000000] kernel direct mapping tables up to aff00000 @ afcee000-afcf1000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] 0100000000 - 0240000000 page 1G [ 0.000000] kernel direct mapping tables up to 240000000 @ 23ffff000-240000000 [ 0.000000] RAMDISK: 35b22000 - 36d89000 [ 0.000000] ACPI: RSDP 00000000000f2a70 00014 (v00 HPQOEM) [ 0.000000] ACPI: RSDT 00000000afefe038 00038 (v01 HPQOEM SLIC-MPC 00000003 01000013) [ 0.000000] ACPI: FACP 00000000afefd000 00074 (v01 HPQOEM 307E 00000003 HP 00000001) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560) [ 0.000000] ACPI: DSDT 00000000afede000 1B628 (v01 HPQOEM SB700 00000001 INTL 20060912) [ 0.000000] ACPI: FACS 00000000afe8f000 00040 [ 0.000000] ACPI: APIC 00000000afefc000 00084 (v01 HPQOEM 307E 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 00000000afefb000 0003C (v01 HPQOEM 307E 00000001 HP 00000001) [ 0.000000] ACPI: HPET 00000000afedb000 00038 (v01 HPQOEM 307E 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 00000000afeda000 00386 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237a00000-ffff88023e7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000afcf1 [ 0.000000] 0: 0x000afeff -> 0x000aff00 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2030721 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 701738 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000afcf1000 - 00000000afdcf000 [ 0.000000] PM: Registered nosave memory: 00000000afdcf000 - 00000000afecf000 [ 0.000000] PM: Registered nosave memory: 00000000afecf000 - 00000000afeff000 [ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:30100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fc00000 s79616 r8192 d22784 u524288 [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998460 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-server root=UUID=338f05b6-6307-4f1a-a8b6-9b12a0edc5ee ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 9300000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ a4000000 [ 0.000000] PM: Registered nosave memory: 00000000a4000000 - 00000000a8000000 [ 0.000000] Memory: 7843652k/9437184k available (6187k kernel code, 1314300k absent, 279232k reserved, 6935k data, 904k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 65011712 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: PIT calibration matches HPET. 1 loops [ 0.000000] Detected 2294.189 MHz processor. [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.37 BogoMIPS (lpj=9176756) [ 0.008008] pid_max: default: 32768 minimum: 301 [ 0.008030] Security Framework initialized [ 0.008044] AppArmor: AppArmor initialized [ 0.008046] Yama: becoming mindful. [ 0.008833] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.013202] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.020563] Mount-cache hash table entries: 256 [ 0.020688] Initializing cgroup subsys cpuacct [ 0.020693] Initializing cgroup subsys memory [ 0.020701] Initializing cgroup subsys devices [ 0.020703] Initializing cgroup subsys freezer [ 0.020705] Initializing cgroup subsys net_cls [ 0.020707] Initializing cgroup subsys blkio [ 0.020713] Initializing cgroup subsys perf_event [ 0.020740] tseg: 00aff00000 [ 0.020742] CPU: Physical Processor ID: 0 [ 0.020744] CPU: Processor Core ID: 0 [ 0.020746] mce: CPU supports 6 MCE banks [ 0.020756] using AMD E400 aware idle routine [ 0.022231] ACPI: Core revision 20110413 [ 0.028012] ftrace: allocating 26005 entries in 102 pages [ 0.036387] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079030] CPU0: AMD Athlon(tm) II P360 Dual-Core Processor stepping 03 [ 0.080004] Performance Events: AMD PMU driver. [ 0.080004] ... version: 0 [ 0.080004] ... bit width: 48 [ 0.080004] ... generic registers: 4 [ 0.080004] ... value mask: 0000ffffffffffff [ 0.080004] ... max period: 00007fffffffffff [ 0.080004] ... fixed-purpose events: 0 [ 0.080004] ... event mask: 000000000000000f [ 0.080004] Booting Node 0, Processors #1 [ 0.080004] smpboot cpu 1: start_ip = 9a000 [ 0.168020] Brought up 2 CPUs [ 0.168022] Total of 2 processors activated (9176.92 BogoMIPS). [ 0.168022] System has AMD C1E enabled [ 0.168053] Switch to broadcast mode on CPU1 [ 0.168442] Switch to broadcast mode on CPU0 [ 0.168442] devtmpfs: initialized [ 0.169580] PM: Registering ACPI NVS region at afdcf000 (1048576 bytes) [ 0.169580] print_constraints: dummy: [ 0.169580] Time: 15:48:08 Date: 11/22/11 [ 0.169580] NET: Registered protocol family 16 [ 0.169595] node 0 link 0: io port [0, ffffff] [ 0.169598] TOM: 00000000c0000000 aka 3072M [ 0.169600] Fam 10h mmconf [e0000000, efffffff] [ 0.169602] node 0 link 0: mmio [c0000000, cfffffff] [ 0.169605] node 0 link 0: mmio [d0000000, d42fffff] [ 0.169607] node 0 link 0: mmio [d4300000, d44fffff] [ 0.169610] node 0 link 0: mmio [d4500000, dfffffff] [ 0.169612] node 0 link 0: mmio [e0000000, e0ffffff] ==> none [ 0.169615] node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff] [ 0.169618] node 0 link 0: mmio [fec00000, fffeffff] [ 0.169620] node 0 link 0: mmio [ffff0000, ffffffff] [ 0.169622] TOM2: 0000000240000000 aka 9216M [ 0.169625] bus: [00, 1f] on node 0 link 0 [ 0.169627] bus: 00 index 0 [io 0x0000-0xffff] [ 0.169630] bus: 00 index 1 [mem 0xc0000000-0xdfffffff] [ 0.169632] bus: 00 index 2 [mem 0xf0000000-0xffffffff] [ 0.169633] bus: 00 index 3 [mem 0x240000000-0xfcffffffff] [ 0.169580] Trying to unpack rootfs image as initramfs... [ 0.169678] Extended Config Space enabled on 1 nodes [ 0.169695] ACPI: bus type pci registered [ 0.169762] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.169766] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.197414] PCI: Using configuration type 1 for base access [ 0.197567] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.197569] mtrr: probably your BIOS does not setup all CPUs. [ 0.197570] mtrr: corrected configuration. [ 0.198301] bio: create slab at 0 [ 0.199666] ACPI: EC: Look up EC in DSDT [ 0.284108] ACPI Error: No handler for Region [ECRM] (ffff88023364fa68) [EmbeddedControl] (20110413/evregion-373) [ 0.284117] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110413/exfldio-292) [ 0.284122] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88023364e438), AE_NOT_EXIST (20110413/psparse-536) [ 0.284131] ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88023364e438), AE_NOT_EXIST (20110413/uteval-103) [ 0.308134] ACPI: Interpreter enabled [ 0.308140] ACPI: (supports S0 S3 S4 S5) [ 0.308163] ACPI: Using IOAPIC for interrupt routing [ 0.316473] ACPI: Power Resource [APPR] (off) [ 0.497114] ACPI: Power Resource [PFN0] (off) [ 0.497153] ACPI: Power Resource [PFN1] (off) [ 0.497188] ACPI: Power Resource [PFN2] (off) [ 0.497225] ACPI: Power Resource [PFN3] (off) [ 0.497260] ACPI: Power Resource [PFN4] (off) [ 0.497742] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.497908] ACPI: No dock devices found. [ 0.497911] HEST: Table not found. [ 0.497914] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.497999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.498149] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.498151] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.498154] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.498156] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff] [ 0.498159] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] [ 0.498161] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] [ 0.498163] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] [ 0.498165] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.498167] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.498170] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.498172] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.498174] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 0.498176] pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff] [ 0.498178] pci_root PNP0A03:00: host bridge window [mem 0x000e8000-0x000ebfff] [ 0.498180] pci_root PNP0A03:00: host bridge window [mem 0x000ec000-0x000effff] [ 0.498183] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 0.498185] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfffdffff] [ 0.498187] pci_root PNP0A03:00: host bridge window [mem 0xffe00000-0xffffffff] [ 0.498192] pci_root PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xffe00000-0xffffffff] ignored [ 0.498197] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000cedff] [ 0.498215] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 [ 0.498260] pci 0000:00:01.0: [103c:9602] type 1 class 0x000604 [ 0.498329] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604 [ 0.498357] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.498360] pci 0000:00:04.0: PME# disabled [ 0.498380] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604 [ 0.498406] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.498409] pci 0000:00:07.0: PME# disabled [ 0.498428] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604 [ 0.498454] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.498457] pci 0000:00:09.0: PME# disabled [ 0.498488] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.498506] pci 0000:00:11.0: reg 10: [io 0x7018-0x701f] [ 0.498516] pci 0000:00:11.0: reg 14: [io 0x7024-0x7027] [ 0.498525] pci 0000:00:11.0: reg 18: [io 0x7010-0x7017] [ 0.498535] pci 0000:00:11.0: reg 1c: [io 0x7020-0x7023] [ 0.498544] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f] [ 0.498554] pci 0000:00:11.0: reg 24: [mem 0xd450b000-0xd450b3ff] [ 0.498600] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.498613] pci 0000:00:12.0: reg 10: [mem 0xd450a000-0xd450afff] [ 0.498679] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.498698] pci 0000:00:12.2: reg 10: [mem 0xd4509000-0xd45090ff] [ 0.498763] pci 0000:00:12.2: supports D1 D2 [ 0.498765] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.498769] pci 0000:00:12.2: PME# disabled [ 0.498789] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.498802] pci 0000:00:13.0: reg 10: [mem 0xd4508000-0xd4508fff] [ 0.498868] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.498887] pci 0000:00:13.2: reg 10: [mem 0xd4507000-0xd45070ff] [ 0.498953] pci 0000:00:13.2: supports D1 D2 [ 0.498955] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.498959] pci 0000:00:13.2: PME# disabled [ 0.498978] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.499051] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.499072] pci 0000:00:14.2: reg 10: [mem 0xd4500000-0xd4503fff 64bit] [ 0.499126] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.499130] pci 0000:00:14.2: PME# disabled [ 0.499143] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.499213] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.499253] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.499266] pci 0000:00:14.5: reg 10: [mem 0xd4506000-0xd4506fff] [ 0.499329] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 0.499342] pci 0000:00:16.0: reg 10: [mem 0xd4505000-0xd4505fff] [ 0.499409] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 0.499427] pci 0000:00:16.2: reg 10: [mem 0xd4504000-0xd45040ff] [ 0.499493] pci 0000:00:16.2: supports D1 D2 [ 0.499495] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.499499] pci 0000:00:16.2: PME# disabled [ 0.499517] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.499533] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.499546] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.499559] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.499575] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.499625] pci 0000:01:05.0: [1002:9712] type 0 class 0x000300 [ 0.499634] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.499639] pci 0000:01:05.0: reg 14: [io 0x6000-0x60ff] [ 0.499644] pci 0000:01:05.0: reg 18: [mem 0xd4400000-0xd440ffff] [ 0.499655] pci 0000:01:05.0: reg 24: [mem 0xd4300000-0xd43fffff] [ 0.499668] pci 0000:01:05.0: supports D1 D2 [ 0.499678] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403 [ 0.499686] pci 0000:01:05.1: reg 10: [mem 0xd4410000-0xd4413fff] [ 0.499713] pci 0000:01:05.1: supports D1 D2 [ 0.499753] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.499756] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] [ 0.499759] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd44fffff] [ 0.499763] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.499804] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200 [ 0.499817] pci 0000:02:00.0: reg 10: [io 0x4000-0x40ff] [ 0.499838] pci 0000:02:00.0: reg 18: [mem 0xd0010000-0xd0010fff 64bit pref] [ 0.499852] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd000ffff 64bit pref] [ 0.499862] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.499891] pci 0000:02:00.0: supports D1 D2 [ 0.499893] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.499897] pci 0000:02:00.0: PME# disabled [ 0.504070] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 0.504077] pci 0000:00:04.0: bridge window [io 0x4000-0x5fff] [ 0.504081] pci 0000:00:04.0: bridge window [mem 0xd3300000-0xd42fffff] [ 0.504085] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref] [ 0.504137] pci 0000:03:00.0: [1095:3132] type 0 class 0x000180 [ 0.504165] pci 0000:03:00.0: reg 10: [mem 0xd2204000-0xd220407f 64bit] [ 0.504187] pci 0000:03:00.0: reg 18: [mem 0xd2200000-0xd2203fff 64bit] [ 0.504202] pci 0000:03:00.0: reg 20: [io 0x2000-0x207f] [ 0.504229] pci 0000:03:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.504272] pci 0000:03:00.0: supports D1 D2 [ 0.504295] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.504304] pci 0000:00:07.0: PCI bridge to [bus 03-05] [ 0.504308] pci 0000:00:07.0: bridge window [io 0x2000-0x3fff] [ 0.504311] pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd32fffff] [ 0.504315] pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref] [ 0.504356] pci 0000:06:00.0: [14e4:4727] type 0 class 0x000280 [ 0.504374] pci 0000:06:00.0: reg 10: [mem 0xd2100000-0xd2103fff 64bit] [ 0.504446] pci 0000:06:00.0: supports D1 D2 [ 0.512070] pci 0000:00:09.0: PCI bridge to [bus 06-06] [ 0.512076] pci 0000:00:09.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) [ 0.512080] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff] [ 0.512084] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.512152] pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode) [ 0.512156] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.512161] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.512165] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.512168] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.512171] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.512173] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.512176] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.512178] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.512181] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.512183] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.512186] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.512188] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.512191] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.512193] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.512196] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.512198] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.512201] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.512203] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.512206] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.512232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.512414] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.512453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.512493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB9_._PRT] [ 0.512528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 0.512613] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.512616] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.512618] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.516289] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.516337] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.516399] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.516459] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.516506] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.516542] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.516578] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.516613] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.516714] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.516718] vgaarb: loaded [ 0.516720] vgaarb: bridge control possible 0000:01:05.0 [ 0.516879] SCSI subsystem initialized [ 0.516934] libata version 3.00 loaded. [ 0.516970] usbcore: registered new interface driver usbfs [ 0.516979] usbcore: registered new interface driver hub [ 0.517004] usbcore: registered new device driver usb [ 0.517079] PCI: Using ACPI for IRQ routing [ 0.526798] PCI: pci_cache_line_size set to 64 bytes [ 0.526905] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.526907] reserve RAM buffer: 00000000afcf1000 - 00000000afffffff [ 0.526910] reserve RAM buffer: 00000000aff00000 - 00000000afffffff [ 0.526992] NetLabel: Initializing [ 0.526994] NetLabel: domain hash size = 128 [ 0.526995] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.527007] NetLabel: unlabeled traffic allowed by default [ 0.527052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.527057] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.529067] Switching to clocksource hpet [ 0.534559] Freeing initrd memory: 18844k freed [ 0.542796] Switched to NOHz mode on CPU #1 [ 0.542804] Switched to NOHz mode on CPU #0 [ 0.546053] AppArmor: AppArmor Filesystem Enabled [ 0.546085] pnp: PnP ACPI init [ 0.546102] ACPI: bus type pnp registered [ 0.546229] pnp 00:00: [bus 00-ff] [ 0.546232] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.546234] pnp 00:00: [io 0x0d00-0xffff window] [ 0.546236] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.546238] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.546240] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.546242] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.546244] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.546246] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.546248] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.546251] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.546253] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.546255] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.546257] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.546259] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.546261] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.546263] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 0.546265] pnp 00:00: [mem 0xf0000000-0xfffdffff window] [ 0.546267] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.546269] pnp 00:00: [mem 0xffe00000-0xffffffff] [ 0.546346] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.548346] pnp 00:01: [io 0x0000-0x000f] [ 0.548350] pnp 00:01: [io 0x0081-0x008f] [ 0.548352] pnp 00:01: [io 0x00c0-0x00df] [ 0.548355] pnp 00:01: [dma 4] [ 0.548422] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.548431] pnp 00:02: [io 0x00f0-0x00fe] [ 0.548475] pnp 00:02: [irq 13] [ 0.548503] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.548510] pnp 00:03: [io 0x0061] [ 0.548536] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.548578] pnp 00:04: [io 0x0010-0x001f] [ 0.548580] pnp 00:04: [io 0x002e-0x002f] [ 0.548581] pnp 00:04: [io 0x004e-0x004f] [ 0.548583] pnp 00:04: [io 0x0072-0x0073] [ 0.548585] pnp 00:04: [io 0x0080] [ 0.548586] pnp 00:04: [io 0x00b0-0x00b1] [ 0.548588] pnp 00:04: [io 0x0092] [ 0.548590] pnp 00:04: [io 0x0400-0x04cf] [ 0.548592] pnp 00:04: [io 0x04d0-0x04d1] [ 0.548593] pnp 00:04: [io 0x04d6] [ 0.548595] pnp 00:04: [io 0x0680-0x06ff] [ 0.548596] pnp 00:04: [io 0x077a] [ 0.548598] pnp 00:04: [io 0x0c00-0x0c01] [ 0.548600] pnp 00:04: [io 0x0c14] [ 0.548601] pnp 00:04: [io 0x0c50-0x0c52] [ 0.548605] pnp 00:04: [io 0x0c6c] [ 0.548606] pnp 00:04: [io 0x0c6f] [ 0.548608] pnp 00:04: [io 0x0cd0-0x0cdb] [ 0.548610] pnp 00:04: [io 0x0220-0x0227] [ 0.548611] pnp 00:04: [io 0x0260-0x0273] [ 0.548613] pnp 00:04: [io 0x0800] [ 0.548615] pnp 00:04: [io 0x0804] [ 0.548616] pnp 00:04: [io 0x087f] [ 0.548618] pnp 00:04: [io 0x0cdc-0x0cdf] [ 0.548620] pnp 00:04: [io 0x00b8] [ 0.548621] pnp 00:04: [io 0x0022-0x0023] [ 0.548623] pnp 00:04: [io 0x0b00-0x0b0f] [ 0.548625] pnp 00:04: [io 0x0b20-0x0b3f] [ 0.548626] pnp 00:04: [io 0x0200-0x027f] [ 0.548702] system 00:04: [io 0x0400-0x04cf] has been reserved [ 0.548705] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.548707] system 00:04: [io 0x04d6] has been reserved [ 0.548709] system 00:04: [io 0x0680-0x06ff] has been reserved [ 0.548712] system 00:04: [io 0x077a] has been reserved [ 0.548714] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.548716] system 00:04: [io 0x0c14] has been reserved [ 0.548719] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.548721] system 00:04: [io 0x0c6c] has been reserved [ 0.548723] system 00:04: [io 0x0c6f] has been reserved [ 0.548725] system 00:04: [io 0x0cd0-0x0cdb] has been reserved [ 0.548728] system 00:04: [io 0x0220-0x0227] has been reserved [ 0.548730] system 00:04: [io 0x0260-0x0273] has been reserved [ 0.548732] system 00:04: [io 0x0800] has been reserved [ 0.548735] system 00:04: [io 0x0804] has been reserved [ 0.548737] system 00:04: [io 0x087f] has been reserved [ 0.548739] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.548742] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.548744] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.548746] system 00:04: [io 0x0200-0x027f] could not be reserved [ 0.548750] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.548789] pnp 00:05: [mem 0x00000000-0x0009ffff] [ 0.548791] pnp 00:05: [mem 0x000ec000-0x000fffff] [ 0.548793] pnp 00:05: [mem 0x00100000-0xbfffffff] [ 0.548795] pnp 00:05: [mem 0xe0000000-0xefffffff] [ 0.548796] pnp 00:05: [mem 0xfeb00000-0xfeb00fff] [ 0.548798] pnp 00:05: [mem 0xfec00000-0xfec00fff] [ 0.548800] pnp 00:05: [mem 0xfee00000-0xfee00fff] [ 0.548802] pnp 00:05: [mem 0xffe00000-0xffffffff] [ 0.548853] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.548856] system 00:05: [mem 0x000ec000-0x000fffff] could not be reserved [ 0.548858] system 00:05: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.548861] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.548864] system 00:05: [mem 0xfeb00000-0xfeb00fff] has been reserved [ 0.548866] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.548869] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.548872] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved [ 0.548875] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.548938] pnp 00:06: [io 0x0070-0x0071] [ 0.548943] pnp 00:06: [irq 8] [ 0.548971] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.549039] pnp 00:07: [mem 0x3ed00000-0x3ed003ff] [ 0.549068] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.549092] pnp 00:08: [io 0x0060] [ 0.549093] pnp 00:08: [io 0x0064] [ 0.549102] pnp 00:08: [irq 1] [ 0.549132] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.549142] pnp 00:09: [irq 12] [ 0.549174] pnp 00:09: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active) [ 0.552781] pnp: PnP ACPI: found 10 devices [ 0.552785] ACPI: ACPI bus type pnp unregistered [ 0.558756] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.558761] pci 0000:03:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.558767] PCI: max bus depth: 1 pci_try_num: 2 [ 0.558797] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.558800] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] [ 0.558803] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd44fffff] [ 0.558806] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.558813] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref] [ 0.558816] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 0.558818] pci 0000:00:04.0: bridge window [io 0x4000-0x5fff] [ 0.558822] pci 0000:00:04.0: bridge window [mem 0xd3300000-0xd42fffff] [ 0.558825] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref] [ 0.558830] pci 0000:03:00.0: BAR 6: assigned [mem 0xd1100000-0xd117ffff pref] [ 0.558832] pci 0000:00:07.0: PCI bridge to [bus 03-05] [ 0.558835] pci 0000:00:07.0: bridge window [io 0x2000-0x3fff] [ 0.558838] pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd32fffff] [ 0.558841] pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref] [ 0.558845] pci 0000:00:09.0: PCI bridge to [bus 06-06] [ 0.558847] pci 0000:00:09.0: bridge window [io disabled] [ 0.558850] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff] [ 0.558853] pci 0000:00:09.0: bridge window [mem pref disabled] [ 0.558857] pci 0000:00:14.4: PCI bridge to [bus 07-07] [ 0.558864] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.558868] pci 0000:00:14.4: bridge window [mem disabled] [ 0.558872] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.558884] pci 0000:00:01.0: setting latency timer to 64 [ 0.558900] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.558903] pci 0000:00:04.0: setting latency timer to 64 [ 0.558912] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.558915] pci 0000:00:07.0: setting latency timer to 64 [ 0.558923] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.558926] pci 0000:00:09.0: setting latency timer to 64 [ 0.558933] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.558935] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.558938] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.558940] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.558942] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.558945] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.558947] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.558949] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.558951] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.558954] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.558956] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.558958] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.558961] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.558963] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.558965] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff] [ 0.558967] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xffffffff] [ 0.558970] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 0.558972] pci_bus 0000:01: resource 1 [mem 0xd4300000-0xd44fffff] [ 0.558975] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.558977] pci_bus 0000:02: resource 0 [io 0x4000-0x5fff] [ 0.558979] pci_bus 0000:02: resource 1 [mem 0xd3300000-0xd42fffff] [ 0.558982] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref] [ 0.558984] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff] [ 0.558986] pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd32fffff] [ 0.558989] pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref] [ 0.558991] pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff] [ 0.558994] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 0.558996] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] [ 0.558998] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] [ 0.559001] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] [ 0.559003] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.559005] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.559007] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.559009] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.559012] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.559014] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.559016] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff] [ 0.559018] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.559021] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.559023] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.559025] pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff] [ 0.559027] pci_bus 0000:07: resource 18 [mem 0xc0000000-0xdfffffff] [ 0.559030] pci_bus 0000:07: resource 19 [mem 0xf0000000-0xffffffff] [ 0.559068] NET: Registered protocol family 2 [ 0.559295] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.560766] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.563514] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.563850] TCP: Hash tables configured (established 524288 bind 65536) [ 0.563853] TCP reno registered [ 0.563873] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.563936] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.564146] NET: Registered protocol family 1 [ 0.564157] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.564266] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.564320] pci 0000:01:05.0: Boot video device [ 0.565692] PCI-DMA: Disabling AGP. [ 0.568988] PCI-DMA: aperture base @ a4000000 size 65536 KB [ 0.568990] PCI-DMA: using GART IOMMU. [ 0.568993] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.572366] audit: initializing netlink socket (disabled) [ 0.572377] type=2000 audit(1321976887.568:1): initialized [ 0.610776] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.646105] VFS: Disk quotas dquot_6.5.2 [ 0.646160] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.646816] fuse init (API version 7.16) [ 0.646931] msgmni has been set to 15485 [ 0.647515] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.647592] io scheduler noop registered [ 0.647596] io scheduler deadline registered (default) [ 0.647675] io scheduler cfq registered [ 0.647945] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.647978] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X [ 0.648110] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.648135] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X [ 0.648250] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.648273] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X [ 0.648388] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.648425] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.652288] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.652396] ACPI: AC Adapter [AC] (on-line) [ 0.652470] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.652475] ACPI: Sleep Button [SLPB] [ 0.652508] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.652662] ACPI: Lid Switch [LID] [ 0.652739] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.652745] ACPI: Power Button [PWRF] [ 0.652853] ACPI: Fan [FAN0] (off) [ 0.652887] ACPI: Fan [FAN1] (off) [ 0.652921] ACPI: Fan [FAN2] (off) [ 0.652952] ACPI: Fan [FAN3] (off) [ 0.652981] ACPI: Fan [FAN4] (off) [ 0.652987] ACPI: acpi_idle registered with cpuidle [ 0.653007] ACPI: processor limited to max C-state 1 [ 0.693317] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.693321] ACPI: Thermal Zone [CPUZ] (66 C) [ 0.703456] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.703460] ACPI: Thermal Zone [TZ3] (27 C) [ 0.703505] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.703532] ERST: Table is not found! [ 0.703634] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.756358] ACPI: Battery Slot [BAT0] (battery present) [ 0.763832] hpet_acpi_add: no address or irqs in _CRS [ 0.763852] Linux agpgart interface v0.103 [ 0.764735] brd: module loaded [ 0.765117] loop: module loaded [ 0.765541] Fixed MDIO Bus: probed [ 0.765559] PPP generic driver version 2.4.2 [ 0.765597] tun: Universal TUN/TAP device driver, 1.6 [ 0.765599] tun: (C) 1999-2004 Max Krasnyansky [ 0.765666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.765832] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.765858] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 0.765862] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.765956] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.765969] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.765988] QUIRK: Enable AMD PLL fix [ 0.765999] ehci_hcd 0000:00:12.2: debug port 1 [ 0.766025] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd4509000 [ 0.776115] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.776257] hub 1-0:1.0: USB hub found [ 0.776261] hub 1-0:1.0: 5 ports detected [ 0.776423] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.776447] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 0.776451] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.776487] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.776496] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.776516] ehci_hcd 0000:00:13.2: debug port 1 [ 0.776531] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd4507000 [ 0.788110] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.788250] hub 2-0:1.0: USB hub found [ 0.788254] hub 2-0:1.0: 5 ports detected [ 0.788418] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.788441] ehci_hcd 0000:00:16.2: setting latency timer to 64 [ 0.788445] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 0.788488] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 0.788496] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.788519] ehci_hcd 0000:00:16.2: debug port 1 [ 0.788534] ehci_hcd 0000:00:16.2: irq 17, io mem 0xd4504000 [ 0.800110] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 0.800248] hub 3-0:1.0: USB hub found [ 0.800252] hub 3-0:1.0: 4 ports detected [ 0.800381] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.800486] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.800513] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 0.800517] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.800569] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 0.800602] ohci_hcd 0000:00:12.0: irq 18, io mem 0xd450a000 [ 0.860230] hub 4-0:1.0: USB hub found [ 0.860242] hub 4-0:1.0: 5 ports detected [ 0.860401] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.860429] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 0.860432] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.860468] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.860487] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd4508000 [ 0.920230] hub 5-0:1.0: USB hub found [ 0.920242] hub 5-0:1.0: 5 ports detected [ 0.920406] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.920430] ohci_hcd 0000:00:14.5: setting latency timer to 64 [ 0.920434] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 0.920476] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 0.920497] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd4506000 [ 0.980240] hub 6-0:1.0: USB hub found [ 0.980251] hub 6-0:1.0: 2 ports detected [ 0.980406] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.980431] ohci_hcd 0000:00:16.0: setting latency timer to 64 [ 0.980435] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 0.980471] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 0.980491] ohci_hcd 0000:00:16.0: irq 18, io mem 0xd4505000 [ 1.040227] hub 7-0:1.0: USB hub found [ 1.040238] hub 7-0:1.0: 4 ports detected [ 1.040360] uhci_hcd: USB Universal Host Controller Interface driver [ 1.040440] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.042109] i8042: Detected active multiplexing controller, rev 1.1 [ 1.042831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.042839] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.042842] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.042844] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.042847] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.042927] mousedev: PS/2 mouse device common for all mice [ 1.043065] rtc_cmos 00:06: RTC can wake from S4 [ 1.043143] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.043166] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.043256] device-mapper: uevent: version 1.0.3 [ 1.043310] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 1.043322] cpuidle: using governor ladder [ 1.043324] cpuidle: using governor menu [ 1.043325] EFI Variables Facility v0.08 2004-May-17 [ 1.043522] TCP cubic registered [ 1.043624] NET: Registered protocol family 10 [ 1.044102] NET: Registered protocol family 17 [ 1.044119] Registering the dns_resolver key type [ 1.044202] PM: Hibernation image not present or could not be loaded. [ 1.044215] registered taskstats version 1 [ 1.067758] Magic number: 3:64:842 [ 1.067875] rtc_cmos 00:06: setting system clock to 2011-11-22 15:48:09 UTC (1321976889) [ 1.067885] powernow-k8: Found 1 AMD Athlon(tm) II P360 Dual-Core Processor (2 cpu cores) (version 2.20.00) [ 1.067913] powernow-k8: 0 : pstate 0 (2300 MHz) [ 1.067915] powernow-k8: 1 : pstate 1 (1700 MHz) [ 1.067917] powernow-k8: 2 : pstate 2 (800 MHz) [ 1.068061] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.068064] EDD information not available. [ 1.069610] Freeing unused kernel memory: 904k freed [ 1.069860] Write protecting the kernel read-only data: 12288k [ 1.076893] Freeing unused kernel memory: 1984k freed [ 1.082281] Freeing unused kernel memory: 1372k freed [ 1.088081] usb 1-5: new high speed USB device number 2 using ehci_hcd [ 1.091819] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.107961] udevd[120]: starting version 173 [ 1.168069] sata_sil24 0000:03:00.0: version 1.1 [ 1.168088] sata_sil24 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.168166] sata_sil24 0000:03:00.0: setting latency timer to 64 [ 1.169982] scsi0 : sata_sil24 [ 1.171825] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.171856] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.171932] r8169 0000:02:00.0: setting latency timer to 64 [ 1.171978] r8169 0000:02:00.0: irq 43 for MSI/MSI-X [ 1.172472] r8169 0000:02:00.0: eth0: RTL8102e at 0xffffc90000c74000, 64:31:50:81:37:0d, XID 04e00000 IRQ 43 [ 1.172502] scsi1 : sata_sil24 [ 1.172553] ata1: SATA max UDMA/100 host m128@0xd2204000 port 0xd2200000 irq 19 [ 1.172557] ata2: SATA max UDMA/100 host m128@0xd2204000 port 0xd2202000 irq 19 [ 1.173656] ahci 0000:00:11.0: version 3.0 [ 1.173677] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.173771] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.173774] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.175963] scsi2 : ahci [ 1.177928] scsi3 : ahci [ 1.178039] ata3: SATA max UDMA/133 abar m1024@0xd450b000 port 0xd450b100 irq 19 [ 1.178043] ata4: SATA max UDMA/133 abar m1024@0xd450b000 port 0xd450b180 irq 19 [ 1.185345] wmi: Mapper loaded [ 1.213980] acpi device:02: registered as cooling_device7 [ 1.214474] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input4 [ 1.214534] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no) [ 1.592069] Refined TSC clocksource calibration: 2294.254 MHz. [ 1.592081] Switching to clocksource tsc [ 1.668070] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.669289] ata3.00: ATA-8: WDC WD3200BEVT-60A23T0, 02.01A02, max UDMA/100 [ 1.669294] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.670587] ata3.00: configured for UDMA/100 [ 1.672074] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.682906] ata4.00: ATAPI: hp DVD RW AD-7586H, KH04, max UDMA/100 [ 1.692969] ata4.00: configured for UDMA/100 [ 2.524100] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 2.658271] hub 2-1:1.0: USB hub found [ 2.658573] hub 2-1:1.0: 4 ports detected [ 2.933059] usb 2-1.1: new high speed USB device number 3 using ehci_hcd [ 3.026851] hub 2-1.1:1.0: USB hub found [ 3.027154] hub 2-1.1:1.0: 4 ports detected [ 3.105038] usb 2-1.2: new low speed USB device number 4 using ehci_hcd [ 3.241738] input: daskeyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.2/2-1.2:1.0/input/input5 [ 3.241839] generic-usb 0003:04D9:2013.0001: input,hidraw0: USB HID v1.10 Keyboard [daskeyboard] on usb-0000:00:13.2-1.2/input0 [ 3.264720] input: daskeyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.2/2-1.2:1.1/input/input6 [ 3.264814] generic-usb 0003:04D9:2013.0002: input,hidraw1: USB HID v1.10 Device [daskeyboard] on usb-0000:00:13.2-1.2/input1 [ 3.264831] usbcore: registered new interface driver usbhid [ 3.264833] usbhid: USB HID core driver [ 3.292888] usb 2-1.4: new full speed USB device number 5 using ehci_hcd [ 3.380109] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 0) [ 3.389851] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133 [ 3.389856] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.393659] input: Samson Technologies Samson GoMic as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.4/2-1.4:1.3/input/input7 [ 3.393764] generic-usb 0003:17A0:0302.0003: input,hidraw2: USB HID v1.00 Device [Samson Technologies Samson GoMic] on usb-0000:00:13.2-1.4/input3 [ 3.399715] ata1.00: configured for UDMA/100 [ 3.399863] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5 [ 3.400046] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.400138] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.400175] sd 0:0:0:0: [sda] Write Protect is off [ 3.400177] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.400193] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.465119] usb 2-1.1.1: new low speed USB device number 6 using ehci_hcd [ 3.562803] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input8 [ 3.562916] generic-usb 0003:192F:0416.0004: input,hidraw3: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.2-1.1.1/input0 [ 3.894945] sda: sda1 sda2 < sda5 > [ 3.895239] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.480077] ata2: SATA link down (SStatus 0 SControl 0) [ 5.480259] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 02.0 PQ: 0 ANSI: 5 [ 5.480394] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 5.480420] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 5.480434] sd 2:0:0:0: [sdb] Write Protect is off [ 5.480438] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.480455] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.482933] scsi 3:0:0:0: CD-ROM hp DVD RW AD-7586H KH04 PQ: 0 ANSI: 5 [ 5.490345] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.490350] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.490480] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 5.490547] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 5.537089] sdb: sdb1 sdb2 < sdb5 > [ 5.537375] sd 2:0:0:0: [sdb] Attached SCSI disk [ 6.890933] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 6.890937] vesafb: scrolling: redraw [ 6.890940] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 6.891630] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011800000, using 4160k, total 4160k [ 6.891772] Console: switching to colour frame buffer device 170x48 [ 6.891795] fb0: VESA VGA frame buffer device [ 7.105369] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem [ 7.105374] EXT4-fs (sdb1): write access will be enabled during recovery [ 9.925628] EXT4-fs (sdb1): recovery complete [ 9.926794] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 29.695689] udevd[433]: starting version 173 [ 29.732661] lp: driver loaded but no devices found [ 29.739504] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.753926] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 29.753933] Disabling lock debugging due to kernel taint [ 29.881548] cfg80211: Calling CRDA to update world regulatory domain [ 29.883065] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 29.884311] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 29.884426] SP5100 TCO timer: mmio address 0xb8fe00 already in use [ 29.904469] brcmutil: module is from the staging directory, the quality is unknown, you have been warned. [ 29.905527] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned. [ 29.938258] brcmsmac 0000:06:00.0: bus 6 slot 0 func 0 irq 5 [ 29.938274] brcmsmac 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 29.938281] brcmsmac 0000:06:00.0: setting latency timer to 64 [ 29.944982] [fglrx] Maximum main memory to use for locked dma buffers: 7517 MBytes. [ 29.945057] [fglrx] vendor: 1002 device: 9712 count: 1 [ 29.945523] [fglrx] ioport: bar 1, base 0x6000, size: 0x100 [ 29.945538] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 29.945542] pci 0000:01:05.0: setting latency timer to 64 [ 29.945961] [fglrx] Kernel PAT support is enabled [ 29.945984] [fglrx] module loaded - fglrx 8.90.5 [Oct 12 2011] with 1 minors [ 29.948883] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 29.948897] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 29.948908] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 29.964112] MCE: In-kernel MCE decoding enabled. [ 29.965285] EDAC MC: Ver: 2.1.0 [ 29.968102] AMD64 EDAC driver v3.4.0 [ 30.016190] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 30.016270] input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 30.021261] EDAC amd64: DRAM ECC disabled. [ 30.021270] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 30.021272] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 30.021273] (Note that use of the override may cause unknown side effects.) [ 30.025815] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 30.025872] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 30.095625] type=1400 audit(1321976918.520:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=599 comm="apparmor_parser" [ 30.096142] type=1400 audit(1321976918.524:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=599 comm="apparmor_parser" [ 30.096442] type=1400 audit(1321976918.524:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=599 comm="apparmor_parser" [ 30.128871] device-mapper: multipath: version 1.3.0 loaded [ 30.314463] Linux video capture interface: v2.00 [ 30.315064] uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Fixed] (05c8:0403) [ 30.365154] input: HP Webcam [2 MP Fixed] as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input11 [ 30.365229] usbcore: registered new interface driver uvcvideo [ 30.365231] USB Video Class driver (v1.1.0) [ 30.380424] cfg80211: World regulatory domain updated: [ 30.380428] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 30.380431] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.380434] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 30.380436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 30.380439] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.380441] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.385492] usbcore: registered new interface driver snd-usb-audio [ 30.424400] input: HP WMI hotkeys as /devices/virtual/input/input12 [ 30.433489] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 30.433494] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433496] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 30.433499] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433501] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 30.433504] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433506] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 30.433508] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433510] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 30.433513] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433515] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 30.433518] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433520] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 30.433522] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433524] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 30.433527] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433529] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 30.433531] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433534] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 30.433536] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433538] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 30.433541] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433543] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 30.433545] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433547] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 30.433550] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.433552] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 30.433555] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 30.436595] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 30.437108] cfg80211: Calling CRDA for country: US [ 30.438214] lib80211: common routines for IEEE802.11 drivers [ 30.438218] lib80211_crypt: registered algorithm 'NULL' [ 30.442299] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 30.442305] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442307] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 30.442310] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442312] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 30.442315] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442317] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 30.442320] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442322] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 30.442324] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442326] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 30.442329] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442331] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 30.442334] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442336] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 30.442338] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442340] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 30.442343] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442345] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 30.442347] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442349] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 30.442352] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) [ 30.442354] cfg80211: Disabling freq 2467 MHz [ 30.442355] cfg80211: Disabling freq 2472 MHz [ 30.442356] cfg80211: Disabling freq 2484 MHz [ 30.442359] cfg80211: Regulatory domain changed to country: US [ 30.442361] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 30.442364] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 30.442366] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 30.442368] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.442371] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.442373] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.442376] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 30.781158] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400 [ 30.823995] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13 [ 35.526712] Adding 11852796k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:11852796k [ 86.933786] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 87.088452] ppdev: user-space parallel port driver [ 87.104338] type=1400 audit(1321976975.532:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1284 comm="apparmor_parser" [ 87.106025] type=1400 audit(1321976975.532:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1284 comm="apparmor_parser" [ 87.153591] NET: Registered protocol family 15 [ 87.233135] r8169 0000:02:00.0: eth0: link down [ 87.233147] r8169 0000:02:00.0: eth0: link down [ 87.235013] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 87.333824] Loading iSCSI transport class v2.0-870. [ 87.335673] iscsi: registered transport (tcp) [ 87.344495] iscsi: registered transport (iser) [ 87.347818] iscsid (1533): /proc/1533/oom_adj is deprecated, please use /proc/1533/oom_score_adj instead. [ 87.407864] type=1400 audit(1321976975.832:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1650 comm="apparmor_parser" [ 87.410759] type=1400 audit(1321976975.836:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1655 comm="apparmor_parser" [ 87.411209] type=1400 audit(1321976975.836:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1655 comm="apparmor_parser" [ 87.411480] type=1400 audit(1321976975.836:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1655 comm="apparmor_parser" [ 87.413102] type=1400 audit(1321976975.840:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1651 comm="apparmor_parser" [ 87.420939] type=1400 audit(1321976975.848:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1661 comm="apparmor_parser" [ 87.425333] type=1400 audit(1321976975.852:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1685 comm="apparmor_parser" [ 87.425421] type=1400 audit(1321976975.852:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1657 comm="apparmor_parser" [ 87.573344] init: failsafe main process (1181) killed by TERM signal [ 87.577361] init: apport pre-start process (1792) terminated with status 1 [ 87.605090] kvm: Nested Virtualization enabled [ 87.605095] kvm: Nested Paging enabled [ 87.625407] init: apport post-stop process (1871) terminated with status 1 [ 87.644256] init: gdm main process (1865) killed by TERM signal