Devices should be IDd by subsystem ID
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
Checkbox Provider - Resource |
Fix Released
|
Medium
|
Sylvain Pineau |
Bug Description
19:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] [1000:005d] (rev 02)
Subsystem: Dell PERC H730P Adapter [1028:1f42]
Devices are currently IDd using the primary PCI ID, which is not entirely accurate. The primary PCI ID does list the IHV make and model, but often the subsystem ID indentifies the actual OEM/Vendor make/model.
So using the example above, the RAID card is displayed in the certificate as a "LSI MegaRAID SAS-3 3108 [Invader]", but as this cert is for a Dell system, the displayed name SHOULD be "Dell PERC H730P Adapter"
Is this done in the resource and then fed into the Submission? Or is this something that needs to be changed on the website side in the parser?
The above came from this system:
https:/
Here's a similar one:
01:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS-3 3008 [Fury] [1000:005f] (rev 02)
Subsystem: Dell PERC H330 Adapter [1028:1f44]
From this system:
https:/
https:/
tags: | added: hwcert-server |
description: | updated |
Changed in plainbox-provider-resource: | |
status: | Fix Committed → Fix Released |
This would be helpful. Please make the necessary changes. This request was made by other OEM as well but went into back burner. But it is good time to list that now that later.