pcb

gcode exports only one line in each drill.gcode file

Bug #1419543 reported by Ferenc Mayer on 2015-02-08
6
This bug affects 1 person
Affects Status Importance Assigned to Milestone
gEDA project
High
Unassigned
pcb
High
Unassigned

Bug Description

I made a double side simple test pcb file using 2 top lines 2 bottom lines and connect them by 2+2=4 vias.
If I use g-code export the drill files created well but only added 1 drill hole parameter to each drill.gcode file.

In the pcb file contains 4 Vias:
...
Via[1600.00mil 1640.00mil 36.00mil 20.00mil 0.0000 25.00mil "" ""]
Via[1600.00mil 2010.00mil 36.00mil 20.00mil 0.0000 20.00mil "" ""]
Via[2320.00mil 1640.00mil 36.00mil 20.00mil 0.0000 25.00mil "" ""]
Via[2320.00mil 2010.00mil 36.00mil 20.00mil 0.0000 20.00mil "" ""]
...

After export files created:

test-0.5080.drill.gcode
(Created by G-code exporter)
(Sun Feb 8 22:39:32 2015)
(Units: mm)
(Board size: 152.40 x 127.00 mm)
(Drill file: 1 drills)
(Drill diameter: 0.508000 mm)
#100=2.000000 (safe Z)
#104=-2.000000 (drill depth)
(---------------------------------)
G17 G21 G90 G64 P0.003 M3 S3000 M7 F50.000000
G0 Z#100
G81 X111.760000 Y75.946000 Z#104 R#100 #ONLY THIS ONE LINE IS ADDED
M5 M9 M2
(end, total distance 0.00mm = 0.00in)

test-0.6350.drill.gcode
(Created by G-code exporter)
(Sun Feb 8 22:39:32 2015)
(Units: mm)
(Board size: 152.40 x 127.00 mm)
(Drill file: 1 drills)
(Drill diameter: 0.635000 mm)
#100=2.000000 (safe Z)
#104=-2.000000 (drill depth)
(---------------------------------)
G17 G21 G90 G64 P0.003 M3 S3000 M7 F50.000000
G0 Z#100
G81 X111.760000 Y85.344000 Z#104 R#100 #ONLY THIS ONE LINE IS ADDED
M5 M9 M2
(end, total distance 0.00mm = 0.00in)

the end of the test-bottom.gcode
(predrilling)
F#102
G81 X0.000000 Y0.000000 Z#101 R#100 #X AND Y VALUES = 0!
G81 X0.000000 Y0.000000 Z#101 R#100 #X AND Y VALUES = 0!
G81 X0.000000 Y0.000000 Z#101 R#100 #X AND Y VALUES = 0!
G81 X111.760000 Y85.344000 Z#101 R#100
(4 predrills)
(milling distance 45.39mm = 1.79in)
M5 M9 M2

Thank You

affects: geda → pcb
tags: added: gcode-export
Changed in pcb:
status: New → Confirmed
importance: Undecided → High
milestone: none → next-bug-release
Bert Timmerman (bert-timmerman) wrote :

I get two drill files for 0.508 mm and 0.635 mm drills with two lines each, with different X,Y pairs, only the Y-coordinates differ.

Bert Timmerman (bert-timmerman) wrote :
Bert Timmerman (bert-timmerman) wrote :
Traumflug (mah-jump-ing) on 2015-09-27
Changed in geda-project:
importance: Undecided → High
status: New → Confirmed
Ferenc Mayer (mayerf) wrote :

The above failure occur only if PCB runing on Oracle Virtualbox (ubuntu 14.01).
Without Virtualbox export ok!

Changed in pcb:
milestone: next-bug-release → future-bug-release
To post a comment you must log in.
This report contains Public information  Edit
Everyone can see this information.

Other bug subscribers