This is what I tried earlier 1.Create vn. 2.Changed the port group settings to trunk 0-4094 3.Launced vms in that port group without triggering any change in the port group after step 2. The above did not work.I did not trigger the port group for every vm launched. Regards Sandip From: Ram Yadav <>> Date: Wednesday, August 22, 2018 at 12:31 AM To: Sandip Dey <>>, Aswani Kumar Gaddam <>>, Sudheendra Rao <>> Cc: Sachchidanand Vaidya <>>, Marcin Orkiszewski <>>, Adrian Szczepański <>>, Amudha R <>> Subject: Re: steps to run sanity on vCenter local setup's Hi Sandip, "3.CVM also changes the vlan config of the port group from vlan 0 to trunk 0-4094.This is the trigger which is causing the scenario to work in master.” Above is what I requested you to try in your setup as requested by Vmware, and you tried and reported that it doesn’t solve the issue. What is the difference between what you tried then and what the CVM is doing now? Thanks, Ram From: Sandip Dey <>> Date: Tuesday, August 21, 2018 at 3:31 AM To: Ram Yadav <>>, Aswani Kumar Gaddam <>>, Sudheendra Rao <>> Cc: Sachchidanand Vaidya <>>, Marcin Orkiszewski <>>, Adrian Szczepański <>>, Amudha R <>> Subject: Re: steps to run sanity on vCenter local setup's I tried master-ocata-235 in my setup.The test passed.Below is the reason it passed R5.0 steps 1.Create vn.java plugin creates the port group with vlan 0. 2.Cretae vm.CVM creates a port in port group with vlan xxx and vlan override. 3.VM does not get ip Master 235 steps 1.Create vn.java plugin creates the port group with vlan 0. 2.Cretae vm.CVM creates a port in port group with vlan xxx and vlan override. 3.CVM also changes the vlan config of the port group from vlan 0 to trunk 0-4094.This is the trigger which is causing the scenario to work in master. 4.VM gets ip Aswani ran R5.0 build 168 and able to see the same problem(With master , he could not reproduce on the same setup). Regards Sandip From: Ram Yadav <>> Date: Tuesday, August 21, 2018 at 1:26 AM To: Aswani Kumar Gaddam <>>, Sudheendra Rao <>> Cc: Sandip Dey <>>, Sachchidanand Vaidya <>>, Marcin Orkiszewski <>>, Adrian Szczepański <>>, Amudha R <>> Subject: Re: steps to run sanity on vCenter local setup's Can we try similar setup to where the problem was recreated on 5.0 ? From: Aswani Kumar Gaddam <>> Date: Monday, August 20, 2018 at 12:41 PM To: Ram Yadav <>>, Sudheendra Rao <>> Cc: Sandip Dey <>>, Sachchidanand Vaidya <>>, Marcin Orkiszewski <>>, Adrian Szczepański <>>, Amudha R <>> Subject: Re: steps to run sanity on vCenter local setup's Ram, Tried mainline-ocata-235 single interface Not able to reproduce the problem Launched like 8 vms manually and through script all of them got ip. Thanks, Aswani Kumar From: Ram Yadav <>> Date: Monday, 20 August 2018 at 11:49 PM To: Madhava Rao Sudheendra Rao <>> Cc: Sandip Dey <>>, Aswani Kumar Gaddam <>>, Sachchidanand Vaidya <>>, Marcin Orkiszewski <>>, Adrian Szczepański <>>, Amudha R <>> Subject: Re: steps to run sanity on vCenter local setup's Sudhee, Let us know when this fix is checked-in, lot of people will start using the test containers and we don’t want this to be the first issue to be looked at. Thanks, Ram From: Sudheendra Rao <>> Date: Saturday, August 18, 2018 at 8:26 PM To: Ram Yadav <>> Cc: Sandip Dey <>>, Aswani Kumar Gaddam <>>, Sachchidanand Vaidya <>>, Marcin Orkiszewski <>>, Adrian Szczepański <>>, Amudha R <>> Subject: Re: steps to run sanity on vCenter local setup's Hi Ram, The error is same as that we saw earlier and we can make out that it’s not fixed. Anyways we will fix this, but is there a requirement that you have to use SRV1 only and not server1? If there is no requirement then it just a matter of changing the name in your vcenter_vars.yaml and you are not blocked from testing. Thanks, Sudhee. Sent from my iPhone On 19-Aug-2018, at 3:38 AM, Ram Yadav <>> wrote: Hi Sudhee, I picked the latest master test container from master 241, I thought Sandip removed the dependency and checked in the fix. Can you have him check-in the fix? Regards, Ram From: Sudheendra Rao <>> Date: Saturday, August 18, 2018 at 4:15 AM To: Ram Yadav <>>, Sandip Dey <>>, Aswani Kumar Gaddam <>> Cc: Sachchidanand Vaidya <>>, Marcin Orkiszewski <>>, Adrian Szczepański <>>, Amudha R <>> Subject: Re: steps to run sanity on vCenter local setup's Hi Ram, Sandip had already mentioned that automation code expects that vcenter_vars.yaml has ‘server1’ only under ‘vcenter_servers’, anything else will result in error. Change all occurrence of SRV1 in vcenter_vars.yaml to server1 and launch new test container using test_runner.sh I tried and it got past that stage, but seeing below error, I don’t understand this, please check – the test container is ab0e1c12eb88 [root@ab0e1c12eb88 contrail-test]# python -m testtools.run scripts.vm_regression.test_vm_basic.TestBasicVMVN.test_ping_within_vn : : [root@10.84.16.10] out: Created symlink from /etc/systemd/system/multi-user.target.wants/nfs-server.service to /usr/lib/systemd/system/nfs-server.service. [root@10.84.16.10] out: [root@10.84.16.10] sudo: systemctl start nfs-server.service ====================================================================== ERROR: setUpClass (scripts.vm_regression.test_vm_basic.TestBasicVMVN) ---------------------------------------------------------------------- Traceback (most recent call last): File "scripts/vm_regression/test_vm_basic.py", line 27, in setUpClass super(TestBasicVMVN, cls).setUpClass() File "scripts/vm_regression/base.py", line 12, in setUpClass super(BaseVnVmTest, cls).setUpClass() File "test_v1.py", line 38, in setUpClass cls.admin_isolated_creds.setUp() File "common/isolated_creds.py", line 132, in setUp password=self.password) File "common/connections.py", line 68, in __init__ self.vnc_lib = self.get_vnc_lib_h() File "common/connections.py", line 167, in get_vnc_lib_h env[attr].setUp() File "/contrail-test/fixtures/vnc_api_test.py", line 113, in setUp if self.orch: File "/contrail-test/fixtures/vnc_api_test.py", line 178, in orch self._orch = self.get_orch_h() File "/contrail-test/fixtures/vnc_api_test.py", line 201, in get_orch_h logger=self.logger) File "/contrail-test/fixtures/vcenter.py", line 144, in __init__ self._nfs_ds = NFSDatastore(self._inputs, self) File "tcutils/util.py", line 997, in __call__ Singleton, cls).__call__(*args, **kwargs) File "/contrail-test/fixtures/vcenter.py", line 92, in __init__ host.configManager.datastoreSystem.CreateNasDatastore(spec) File "/usr/lib/python2.7/site-packages/pyVmomi/VmomiSupport.py", line 580, in self.f(*(self.args + (obj,) + args), **kwargs) File "/usr/lib/python2.7/site-packages/pyVmomi/VmomiSupport.py", line 386, in _InvokeMethod return self._stub.InvokeMethod(self, info, args) File "/usr/lib/python2.7/site-packages/pyVmomi/SoapAdapter.py", line 1366, in InvokeMethod raise obj # pylint: disable-msg=E0702 vim.fault.DuplicateName: (vim.fault.DuplicateName) { dynamicType = , dynamicProperty = (vmodl.DynamicProperty) [], msg = "The name 'nfs-ds' already exists.", faultCause = , faultMessage = (vmodl.LocalizableMessage) [], name = 'nfs-ds', object = 'vim.Datastore:10.84.16.10:/nfs' } Ran 0 tests in 25.285s FAILED (failures=1) Thanks, Sudhee. From: Ram Yadav <>> Date: Saturday, 18 August 2018 at 6:21 AM To: Sandip Dey <>> Cc: Sachchidanand Vaidya <>>, Sandip Dey <>>, Marcin Orkiszewski <>>, Sudheendra Rao <>>, Adrian Szczepański <>>, Amudha R <>> Subject: Re: steps to run sanity on vCenter local setup's Hi Sandip, I pulled in the docker image: contrail-test-test:master-221 And followed the steps for single sanity test case run. I’m getting the following error: ERROR: setUpClass (scripts.vm_regression.test_vm_basic.TestBasicVMVN) ---------------------------------------------------------------------- Traceback (most recent call last): File "scripts/vm_regression/test_vm_basic.py", line 27, in setUpClass super(TestBasicVMVN, cls).setUpClass() File "scripts/vm_regression/base.py", line 12, in setUpClass super(BaseVnVmTest, cls).setUpClass() File "test_v1.py", line 13, in setUpClass super(BaseTestCase_v1, cls).setUpClass() File "test.py", line 79, in setUpClass cls.inputs = ContrailTestInit(cls.input_file,logger = cls.logger) File "common/contrail_test_init.py", line 853, in __init__ self.inputs = TestInputs(input_file, self.logger) File "tcutils/util.py", line 997, in __call__ Singleton, cls).__call__(*args, **kwargs) File "common/contrail_test_init.py", line 102, in __init__ self.parse_yml_file() File "common/contrail_test_init.py", line 589, in parse_yml_file self.vcenter_dc = _parse_vcenter.vcenter_dc File "common/contrail_test_init.py", line 1466, in vcenter_dc Test container is spawned on 10.84.16.10. /root/contrail-ansible-deployer has the contrail_test_input.yml and vcenter_vars.yml Thanks, Ram From: Ram Yadav <