[  124.133367] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw
[  124.173756] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed.
[  124.173765] b43legacy-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3).
[  124.703516] lp: driver loaded but no devices found
[  124.816193] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[  124.816587] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  124.865759] ppdev: user-space parallel port driver
[  125.505083] [drm] DAC-6: set mode 640x480 0
[  127.332440] [drm] DAC-6: set mode 640x480 0
[  129.403221] [drm] DAC-6: set mode 640x480 0
[  129.899611] [drm] DAC-6: set mode 640x480 0
[  133.091573] [drm] DAC-6: set mode 640x480 0
[  133.588197] [drm] DAC-6: set mode 640x480 0
[  134.289645] [drm] DAC-6: set mode 640x480 0
[  134.817911] [drm] DAC-6: set mode 640x480 0
[  135.300021] eth0: no IPv6 routers present
[  135.477946] [drm] DAC-6: set mode 640x480 0
[  135.985164] [drm] DAC-6: set mode 640x480 0
[  150.816311] ata1: lost interrupt (Status 0x58)
[  150.820016] ata1: drained 32768 bytes to clear DRQ.
[  150.875755] ata1.00: limiting speed to UDMA/44:PIO4
[  150.875762] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  150.875776] ata1.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 0 dma 131072 in
[  150.875778]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  150.875783] ata1.00: status: { DRDY }
[  150.875815] ata1: soft resetting link
[  151.028951] ata1.00: configured for UDMA/44
[  151.028965] ata1.00: device reported invalid CHS sector 0
[  151.028992] ata1: EH complete
[  461.521722] [drm] DAC-6: set mode 640x480 0
[  462.019335] [drm] DAC-6: set mode 640x480 0