[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #45-Ubuntu SMP Sat Oct 16 19:52:42 UTC 2010 (Ubuntu 2.6.32-25.45-generic 2.6.32.21+drm33.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7b7c795a-86d2-483c-addb-15a93e169bf9 ro splash crashkernel=384M-2G:64M,2G-:128M quiet splash hpet=disable hdpvr_debug=7 video_nr=0 default_video_input=2 default_audio_input=2 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098800 (usable) [ 0.000000] BIOS-e820: 0000000000098800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf454000 (usable) [ 0.000000] BIOS-e820: 00000000bf454000 - 00000000bf497000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf497000 - 00000000bf50b000 (reserved) [ 0.000000] BIOS-e820: 00000000bf50b000 - 00000000bf50d000 (usable) [ 0.000000] BIOS-e820: 00000000bf50d000 - 00000000bf613000 (reserved) [ 0.000000] BIOS-e820: 00000000bf613000 - 00000000bf614000 (usable) [ 0.000000] BIOS-e820: 00000000bf614000 - 00000000bf615000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf615000 - 00000000bf61d000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf61d000 - 00000000bf61e000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf61e000 - 00000000bf620000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf620000 - 00000000bf628000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf628000 - 00000000bf649000 (reserved) [ 0.000000] BIOS-e820: 00000000bf649000 - 00000000bf68c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf68c000 - 00000000bf800000 (usable) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable) [ 0.000000] DMI 2.6 present. [ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 base 138000000 mask FF8000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000098800 (usable) [ 0.000000] modified: 0000000000098800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf454000 (usable) [ 0.000000] modified: 00000000bf454000 - 00000000bf497000 (ACPI NVS) [ 0.000000] modified: 00000000bf497000 - 00000000bf50b000 (reserved) [ 0.000000] modified: 00000000bf50b000 - 00000000bf50d000 (usable) [ 0.000000] modified: 00000000bf50d000 - 00000000bf613000 (reserved) [ 0.000000] modified: 00000000bf613000 - 00000000bf614000 (usable) [ 0.000000] modified: 00000000bf614000 - 00000000bf615000 (ACPI NVS) [ 0.000000] modified: 00000000bf615000 - 00000000bf61d000 (ACPI data) [ 0.000000] modified: 00000000bf61d000 - 00000000bf61e000 (ACPI NVS) [ 0.000000] modified: 00000000bf61e000 - 00000000bf620000 (ACPI data) [ 0.000000] modified: 00000000bf620000 - 00000000bf628000 (ACPI NVS) [ 0.000000] modified: 00000000bf628000 - 00000000bf649000 (reserved) [ 0.000000] modified: 00000000bf649000 - 00000000bf68c000 (ACPI NVS) [ 0.000000] modified: 00000000bf68c000 - 00000000bf800000 (usable) [ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000138000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bf800000 page 2M [ 0.000000] kernel direct mapping tables up to bf800000 @ 8000-c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0138000000 page 2M [ 0.000000] kernel direct mapping tables up to 138000000 @ a000-10000 [ 0.000000] RAMDISK: 3779d000 - 37fef964 [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000bf61ee18 00054 (v01 INTEL DH55HC 01072009 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bf61cd98 000F4 (v04 INTEL DH55HC 01072009 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - BF61DF40/00000000BF61DE40, using 32 (20090903/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000bf615018 06B88 (v01 INTEL DH55HC 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf61df40 00040 [ 0.000000] ACPI: APIC 00000000bf61cf18 000CC (v02 INTEL DH55HC 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 00000000bf61cc18 00102 (v01 INTEL DH55HC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000bf61ff18 0003C (v01 INTEL DH55HC 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf61fe98 00038 (v01 INTEL DH55HC 01072009 AMI. 00000003) [ 0.000000] ACPI: ASF! 00000000bf61ec18 000A0 (v32 INTEL DH55HC 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000138000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000138000000 [ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 0000000000036fff] pages 27 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0138000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2ca64] TEXT DATA BSS ==> [0001000000 - 0001a2ca64] [ 0.000000] #3 [003779d000 - 0037fef964] RAMDISK ==> [003779d000 - 0037fef964] [ 0.000000] #4 [0000098800 - 0000100000] BIOS reserved ==> [0000098800 - 0000100000] [ 0.000000] #5 [0001a2d000 - 0001a2d185] BRK ==> [0001a2d000 - 0001a2d185] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000fcd40] fcd40 [ 0.000000] Reserving 128MB of memory at 32MB for crashkernel (System RAM: 4992MB) [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00138000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x00000098 [ 0.000000] 0: 0x00000100 -> 0x000bf454 [ 0.000000] 0: 0x000bf50b -> 0x000bf50d [ 0.000000] 0: 0x000bf613 -> 0x000bf614 [ 0.000000] 0: 0x000bf68c -> 0x000bf800 [ 0.000000] 0: 0x00100000 -> 0x00138000 [ 0.000000] On node 0 totalpages: 1013086 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 109 pages reserved [ 0.000000] DMA zone: 3822 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765443 pages, LIFO batch:31 [ 0.000000] Normal zone: 3136 pages used for memmap [ 0.000000] Normal zone: 226240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 0000000000099000 [ 0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf454000 - 00000000bf497000 [ 0.000000] PM: Registered nosave memory: 00000000bf497000 - 00000000bf50b000 [ 0.000000] PM: Registered nosave memory: 00000000bf50d000 - 00000000bf613000 [ 0.000000] PM: Registered nosave memory: 00000000bf614000 - 00000000bf615000 [ 0.000000] PM: Registered nosave memory: 00000000bf615000 - 00000000bf61d000 [ 0.000000] PM: Registered nosave memory: 00000000bf61d000 - 00000000bf61e000 [ 0.000000] PM: Registered nosave memory: 00000000bf61e000 - 00000000bf620000 [ 0.000000] PM: Registered nosave memory: 00000000bf620000 - 00000000bf628000 [ 0.000000] PM: Registered nosave memory: 00000000bf628000 - 00000000bf649000 [ 0.000000] PM: Registered nosave memory: 00000000bf649000 - 00000000bf68c000 [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000 [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bf800000 (gap: bf800000:20800000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u131072 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995505 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7b7c795a-86d2-483c-addb-15a93e169bf9 ro splash crashkernel=384M-2G:64M,2G-:128M quiet splash hpet=disable hdpvr_debug=7 video_nr=0 default_video_input=2 default_audio_input=2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3776852k/5111808k available (5420k kernel code, 1059464k absent, 275492k reserved, 2974k data, 872k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:536 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 40632320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] Fast TSC calibration using PIT [ 0.020000] Detected 3059.159 MHz processor. [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6118.31 BogoMIPS (lpj=30591590) [ 0.000022] Security Framework initialized [ 0.000037] AppArmor: AppArmor initialized [ 0.000307] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001141] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001485] Mount-cache hash table entries: 256 [ 0.001583] Initializing cgroup subsys ns [ 0.001587] Initializing cgroup subsys cpuacct [ 0.001590] Initializing cgroup subsys memory [ 0.001595] Initializing cgroup subsys devices [ 0.001597] Initializing cgroup subsys freezer [ 0.001599] Initializing cgroup subsys net_cls [ 0.001614] CPU: Physical Processor ID: 0 [ 0.001615] CPU: Processor Core ID: 0 [ 0.001618] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001619] CPU: L2 cache: 256K [ 0.001620] CPU: L3 cache: 4096K [ 0.001623] CPU 0/0x0 -> Node 0 [ 0.001625] mce: CPU supports 9 MCE banks [ 0.001635] CPU0: Thermal monitoring enabled (TM1) [ 0.001638] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 [ 0.001646] using mwait in idle threads. [ 0.001647] Performance Events: Westmere events, Intel PMU driver. [ 0.001652] ... version: 3 [ 0.001653] ... bit width: 48 [ 0.001654] ... generic registers: 4 [ 0.001655] ... value mask: 0000ffffffffffff [ 0.001656] ... max period: 000000007fffffff [ 0.001657] ... fixed-purpose events: 3 [ 0.001658] ... event mask: 000000070000000f [ 0.003526] ACPI: Core revision 20090903 [ 0.013285] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.013289] ftrace: allocating 22538 entries in 89 pages [ 0.019292] Setting APIC routing to physical flat [ 0.019683] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.119470] CPU0: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 02 [ 0.233241] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.243539] Initializing CPU#1 [ 0.392784] CPU: Physical Processor ID: 0 [ 0.392785] CPU: Processor Core ID: 0 [ 0.392788] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.392789] CPU: L2 cache: 256K [ 0.392790] CPU: L3 cache: 4096K [ 0.392792] CPU 1/0x1 -> Node 0 [ 0.392803] CPU1: Thermal monitoring enabled (TM1) [ 0.392806] CPU 1 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 [ 0.392872] CPU1: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 02 [ 0.392881] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.412926] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.423149] Initializing CPU#2 [ 0.572383] CPU: Physical Processor ID: 0 [ 0.572384] CPU: Processor Core ID: 2 [ 0.572386] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.572387] CPU: L2 cache: 256K [ 0.572388] CPU: L3 cache: 4096K [ 0.572390] CPU 2/0x4 -> Node 0 [ 0.572401] CPU2: Thermal monitoring enabled (TM1) [ 0.572404] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 [ 0.572449] CPU2: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 02 [ 0.572457] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.592500] Booting processor 3 APIC 0x5 ip 0x6000 [ 0.602722] Initializing CPU#3 [ 0.751981] CPU: Physical Processor ID: 0 [ 0.751982] CPU: Processor Core ID: 2 [ 0.751984] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.751985] CPU: L2 cache: 256K [ 0.751986] CPU: L3 cache: 4096K [ 0.751987] CPU 3/0x5 -> Node 0 [ 0.751997] CPU3: Thermal monitoring enabled (TM1) [ 0.751999] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 [ 0.752017] CPU3: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 02 [ 0.752025] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.772003] Brought up 4 CPUs [ 0.772005] Total of 4 processors activated (24472.65 BogoMIPS). [ 0.773318] CPU0 attaching sched-domain: [ 0.773322] domain 0: span 0-1 level SIBLING [ 0.773324] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.773327] domain 1: span 0-3 level MC [ 0.773329] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 0.773334] CPU1 attaching sched-domain: [ 0.773335] domain 0: span 0-1 level SIBLING [ 0.773337] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.773340] domain 1: span 0-3 level MC [ 0.773341] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 0.773344] CPU2 attaching sched-domain: [ 0.773346] domain 0: span 2-3 level SIBLING [ 0.773347] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 0.773350] domain 1: span 0-3 level MC [ 0.773351] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.773354] CPU3 attaching sched-domain: [ 0.773355] domain 0: span 2-3 level SIBLING [ 0.773357] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 0.773360] domain 1: span 0-3 level MC [ 0.773361] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.773566] devtmpfs: initialized [ 0.773801] regulator: core version 0.5 [ 0.773834] Time: 21:34:02 Date: 11/13/10 [ 0.773867] NET: Registered protocol family 16 [ 0.773934] Trying to unpack rootfs image as initramfs... [ 0.773956] ACPI: bus type pci registered [ 0.774017] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.774019] PCI: MCFG area at e0000000 reserved in E820 [ 0.775428] PCI: Using MMCONFIG at e0000000 - e3ffffff [ 0.775429] PCI: Using configuration type 1 for base access [ 0.775916] bio: create slab at 0 [ 0.776538] ACPI: EC: Look up EC in DSDT [ 0.778494] ACPI: Executed 1 blocks of module-level executable AML code [ 0.783576] ACPI: Interpreter enabled [ 0.783579] ACPI: (supports S0 S1 S3 S4 S5) [ 0.783595] ACPI: Using IOAPIC for interrupt routing [ 0.783772] ACPI: BIOS _OSI(Linux) query ignored [ 0.789564] ACPI: No dock devices found. [ 0.789752] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.789823] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.789825] pci 0000:00:01.0: PME# disabled [ 0.789906] pci 0000:00:16.0: reg 10 64bit mmio: [0xfb22a000-0xfb22a00f] [ 0.789971] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.789975] pci 0000:00:16.0: PME# disabled [ 0.790019] pci 0000:00:16.2: reg 10 io port: [0xf0f0-0xf0f7] [ 0.790025] pci 0000:00:16.2: reg 14 io port: [0xf0e0-0xf0e3] [ 0.790032] pci 0000:00:16.2: reg 18 io port: [0xf0d0-0xf0d7] [ 0.790040] pci 0000:00:16.2: reg 1c io port: [0xf0c0-0xf0c3] [ 0.790047] pci 0000:00:16.2: reg 20 io port: [0xf0b0-0xf0bf] [ 0.790128] pci 0000:00:16.3: reg 10 io port: [0xf0a0-0xf0a7] [ 0.790136] pci 0000:00:16.3: reg 14 32bit mmio: [0xfb229000-0xfb229fff] [ 0.790241] pci 0000:00:19.0: reg 10 32bit mmio: [0xfb200000-0xfb21ffff] [ 0.790247] pci 0000:00:19.0: reg 14 32bit mmio: [0xfb228000-0xfb228fff] [ 0.790255] pci 0000:00:19.0: reg 18 io port: [0xf040-0xf05f] [ 0.790301] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.790305] pci 0000:00:19.0: PME# disabled [ 0.790356] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb227000-0xfb2273ff] [ 0.790413] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.790417] pci 0000:00:1a.0: PME# disabled [ 0.790464] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfb220000-0xfb223fff] [ 0.790514] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.790518] pci 0000:00:1b.0: PME# disabled [ 0.790594] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.790598] pci 0000:00:1c.0: PME# disabled [ 0.790680] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.790683] pci 0000:00:1c.4: PME# disabled [ 0.790741] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb226000-0xfb2263ff] [ 0.790797] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.790801] pci 0000:00:1d.0: PME# disabled [ 0.790995] pci 0000:00:1f.2: reg 10 io port: [0xf090-0xf097] [ 0.791002] pci 0000:00:1f.2: reg 14 io port: [0xf080-0xf083] [ 0.791008] pci 0000:00:1f.2: reg 18 io port: [0xf070-0xf077] [ 0.791014] pci 0000:00:1f.2: reg 1c io port: [0xf060-0xf063] [ 0.791021] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f] [ 0.791027] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb225000-0xfb2257ff] [ 0.791066] pci 0000:00:1f.2: PME# supported from D3hot [ 0.791070] pci 0000:00:1f.2: PME# disabled [ 0.791104] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb224000-0xfb2240ff] [ 0.791119] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f] [ 0.791161] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.791168] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.791174] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xd0000000-0xd1ffffff] [ 0.791178] pci 0000:01:00.0: reg 24 io port: [0xe000-0xe07f] [ 0.791182] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfb000000-0xfb07ffff] [ 0.791223] pci 0000:01:00.1: reg 10 32bit mmio: [0xfb080000-0xfb083fff] [ 0.791298] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] [ 0.791300] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfb0fffff] [ 0.791303] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xd1ffffff] [ 0.791429] pci 0000:03:00.0: reg 10 64bit mmio: [0xfb184000-0xfb18407f] [ 0.791448] pci 0000:03:00.0: reg 18 64bit mmio: [0xfb180000-0xfb183fff] [ 0.791458] pci 0000:03:00.0: reg 20 io port: [0xd000-0xd07f] [ 0.791477] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfb100000-0xfb17ffff] [ 0.791524] pci 0000:03:00.0: supports D1 D2 [ 0.791585] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 0.791589] pci 0000:00:1c.4: bridge 32bit mmio: [0xfb100000-0xfb1fffff] [ 0.791638] pci 0000:00:1e.0: transparent bridge [ 0.791667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.791816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.791857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.791915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 0.904485] Freeing initrd memory: 8522k freed [ 1.291381] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.291467] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.291552] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 1.291635] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 1.291717] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 1.291799] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 1.291882] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.291965] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.292055] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.292058] vgaarb: loaded [ 1.292129] SCSI subsystem initialized [ 1.292204] libata version 3.00 loaded. [ 1.292251] usbcore: registered new interface driver usbfs [ 1.292258] usbcore: registered new interface driver hub [ 1.292275] usbcore: registered new device driver usb [ 1.292350] ACPI: WMI: Mapper loaded [ 1.292351] PCI: Using ACPI for IRQ routing [ 1.292477] NetLabel: Initializing [ 1.292478] NetLabel: domain hash size = 128 [ 1.292479] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.292489] NetLabel: unlabeled traffic allowed by default [ 1.292518] Switching to clocksource tsc [ 1.293627] AppArmor: AppArmor Filesystem Enabled [ 1.293636] pnp: PnP ACPI init [ 1.293646] ACPI: bus type pnp registered [ 1.790318] pnp: PnP ACPI: found 12 devices [ 1.790319] ACPI: ACPI bus type pnp unregistered [ 1.790326] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 1.790328] system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved [ 1.790330] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved [ 1.790332] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 1.790334] system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved [ 1.790340] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 1.790343] system 00:0a: ioport range 0x400-0x47f has been reserved [ 1.790345] system 00:0a: ioport range 0x1180-0x119f has been reserved [ 1.790346] system 00:0a: ioport range 0x500-0x57f has been reserved [ 1.790348] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.790350] system 00:0a: iomem range 0xfec00000-0xfecfffff could not be reserved [ 1.790352] system 00:0a: iomem range 0xfed08000-0xfed08fff has been reserved [ 1.790354] system 00:0a: iomem range 0xff000000-0xffffffff has been reserved [ 1.794997] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.794999] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 1.795001] pci 0000:00:01.0: MEM window: 0xfa000000-0xfb0fffff [ 1.795004] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000d1ffffff [ 1.795007] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.795008] pci 0000:00:1c.0: IO window: disabled [ 1.795013] pci 0000:00:1c.0: MEM window: disabled [ 1.795016] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.795023] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 1.795025] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 1.795031] pci 0000:00:1c.4: MEM window: 0xfb100000-0xfb1fffff [ 1.795034] pci 0000:00:1c.4: PREFETCH window: disabled [ 1.795041] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 1.795042] pci 0000:00:1e.0: IO window: disabled [ 1.795046] pci 0000:00:1e.0: MEM window: disabled [ 1.795050] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.795061] alloc irq_desc for 16 on node -1 [ 1.795062] alloc kstat_irqs on node -1 [ 1.795066] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.795069] pci 0000:00:01.0: setting latency timer to 64 [ 1.795077] alloc irq_desc for 17 on node -1 [ 1.795078] alloc kstat_irqs on node -1 [ 1.795080] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.795084] pci 0000:00:1c.0: setting latency timer to 64 [ 1.795092] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.795096] pci 0000:00:1c.4: setting latency timer to 64 [ 1.795102] pci 0000:00:1e.0: setting latency timer to 64 [ 1.795106] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.795107] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.795109] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 1.795110] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfb0fffff] [ 1.795112] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xd1ffffff] [ 1.795113] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 1.795115] pci_bus 0000:03: resource 1 mem: [0xfb100000-0xfb1fffff] [ 1.795116] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 1.795118] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.795138] NET: Registered protocol family 2 [ 1.795255] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.795952] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.797980] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.798224] TCP: Hash tables configured (established 524288 bind 65536) [ 1.798226] TCP reno registered [ 1.798328] NET: Registered protocol family 1 [ 1.849682] pci 0000:01:00.0: Boot video device [ 1.849917] Scanning for low memory corruption every 60 seconds [ 1.850000] audit: initializing netlink socket (disabled) [ 1.850008] type=2000 audit(1289684043.728:1): initialized [ 1.856931] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.857828] VFS: Disk quotas dquot_6.5.2 [ 1.857863] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.858254] fuse init (API version 7.13) [ 1.858310] msgmni has been set to 7393 [ 1.858464] alg: No test for stdrng (krng) [ 1.858503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.858505] io scheduler noop registered [ 1.858506] io scheduler anticipatory registered [ 1.858508] io scheduler deadline registered [ 1.858531] io scheduler cfq registered (default) [ 1.858606] alloc irq_desc for 24 on node -1 [ 1.858608] alloc kstat_irqs on node -1 [ 1.858614] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 1.858618] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.858702] alloc irq_desc for 25 on node -1 [ 1.858703] alloc kstat_irqs on node -1 [ 1.858710] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 1.858718] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.858824] alloc irq_desc for 26 on node -1 [ 1.858825] alloc kstat_irqs on node -1 [ 1.858831] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X [ 1.858840] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.858901] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.858915] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.858982] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.858985] ACPI: Power Button [PWRB] [ 1.859012] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.859014] ACPI: Power Button [PWRF] [ 1.859541] ACPI: SSDT 00000000bf614c18 0038C (v01 AMI IST 00000001 MSFT 03000001) [ 1.859748] ACPI Warning: Incorrect checksum in table [SSDT] - 3F, should be 1F (20090903/tbutils-314) [ 1.859752] ACPI: SSDT 00000000bf61dd18 00084 (v01 AMI CST 00000001 MSFT 03000001) [ 1.860175] Monitor-Mwait will be used to enter C-2 state [ 1.860190] Monitor-Mwait will be used to enter C-3 state [ 1.860219] processor LNXCPU:00: registered as cooling_device0 [ 1.860708] processor LNXCPU:01: registered as cooling_device1 [ 1.861215] processor LNXCPU:02: registered as cooling_device2 [ 1.861714] processor LNXCPU:03: registered as cooling_device3 [ 1.864350] hpet_acpi_add: no address or irqs in _CRS [ 1.864358] Linux agpgart interface v0.103 [ 1.864382] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.864502] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.864739] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.864823] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.864906] 0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 17) is a 16550A [ 1.865485] brd: module loaded [ 1.865762] loop: module loaded [ 1.865807] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.865880] alloc irq_desc for 18 on node -1 [ 1.865882] alloc kstat_irqs on node -1 [ 1.865885] pata_acpi 0000:00:16.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.865905] pata_acpi 0000:00:16.2: setting latency timer to 64 [ 1.865916] pata_acpi 0000:00:16.2: PCI INT C disabled [ 1.866074] Fixed MDIO Bus: probed [ 1.866093] PPP generic driver version 2.4.2 [ 1.866114] tun: Universal TUN/TAP device driver, 1.6 [ 1.866115] tun: (C) 1999-2004 Max Krasnyansky [ 1.866157] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.866171] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.866180] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.866183] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.866205] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.866231] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.870182] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 1.870207] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfb227000 [ 1.889509] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.889569] usb usb1: configuration #1 chosen from 1 choice [ 1.889586] hub 1-0:1.0: USB hub found [ 1.889591] hub 1-0:1.0: 2 ports detected [ 1.889624] alloc irq_desc for 23 on node -1 [ 1.889625] alloc kstat_irqs on node -1 [ 1.889628] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.889637] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.889640] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.889658] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.889679] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.893632] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 1.893642] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb226000 [ 1.909464] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.909518] usb usb2: configuration #1 chosen from 1 choice [ 1.909533] hub 2-0:1.0: USB hub found [ 1.909536] hub 2-0:1.0: 2 ports detected [ 1.909564] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.909571] uhci_hcd: USB Universal Host Controller Interface driver [ 1.909606] PNP: No PS/2 controller found. Probing ports directly. [ 1.912567] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.912571] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.912635] mice: PS/2 mouse device common for all mice [ 1.912707] rtc_cmos 00:06: RTC can wake from S4 [ 1.912728] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.912760] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 1.912832] device-mapper: uevent: version 1.0.3 [ 1.912885] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.912936] device-mapper: multipath: version 1.1.0 loaded [ 1.912938] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.913126] cpuidle: using governor ladder [ 1.913241] cpuidle: using governor menu [ 1.913480] TCP cubic registered [ 1.913571] NET: Registered protocol family 10 [ 1.913891] lo: Disabled Privacy Extensions [ 1.914065] NET: Registered protocol family 17 [ 1.914772] PM: Resume from disk failed. [ 1.914786] registered taskstats version 1 [ 1.915223] Magic number: 2:266:601 [ 1.915291] rtc_cmos 00:06: setting system clock to 2010-11-13 21:34:04 UTC (1289684044) [ 1.915294] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.915295] EDD information not available. [ 1.915361] Freeing unused kernel memory: 872k freed [ 1.915502] Write protecting the kernel read-only data: 7692k [ 1.925909] udev: starting version 151 [ 1.943579] sata_sil24 0000:03:00.0: version 1.1 [ 1.943602] sata_sil24 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.943690] sata_sil24 0000:03:00.0: setting latency timer to 64 [ 1.947547] ahci 0000:00:1f.2: version 3.0 [ 1.947565] alloc irq_desc for 19 on node -1 [ 1.947567] alloc kstat_irqs on node -1 [ 1.947573] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.947624] alloc irq_desc for 27 on node -1 [ 1.947626] alloc kstat_irqs on node -1 [ 1.947636] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 1.954861] scsi0 : sata_sil24 [ 1.955113] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.955115] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.959773] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.959777] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst [ 1.959783] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.959927] scsi1 : sata_sil24 [ 1.959992] ata1: SATA max UDMA/100 host m128@0xfb184000 port 0xfb180000 irq 16 [ 1.959997] ata2: SATA max UDMA/100 host m128@0xfb184000 port 0xfb182000 irq 16 [ 2.059179] scsi2 : ahci [ 2.059248] scsi3 : ahci [ 2.059293] scsi4 : ahci [ 2.059335] scsi5 : ahci [ 2.059379] scsi6 : ahci [ 2.059423] scsi7 : ahci [ 2.059560] ata3: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225100 irq 27 [ 2.059563] ata4: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225180 irq 27 [ 2.059567] ata5: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225200 irq 27 [ 2.059570] ata6: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225280 irq 27 [ 2.059573] ata7: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225300 irq 27 [ 2.059577] ata8: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225380 irq 27 [ 2.059641] alloc irq_desc for 20 on node -1 [ 2.059644] alloc kstat_irqs on node -1 [ 2.059650] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.059661] e1000e 0000:00:19.0: setting latency timer to 64 [ 2.059782] alloc irq_desc for 28 on node -1 [ 2.059783] alloc kstat_irqs on node -1 [ 2.059793] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 2.208794] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.358892] usb 1-1: configuration #1 chosen from 1 choice [ 2.358981] hub 1-1:1.0: USB hub found [ 2.359080] hub 1-1:1.0: 6 ports detected [ 2.408361] ata7: SATA link down (SStatus 0 SControl 300) [ 2.408395] ata5: SATA link down (SStatus 0 SControl 300) [ 2.408416] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.408435] ata8: SATA link down (SStatus 0 SControl 300) [ 2.408452] ata6: SATA link down (SStatus 0 SControl 300) [ 2.409455] ata4.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133 [ 2.409457] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.410575] ata4.00: configured for UDMA/133 [ 2.478192] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.509239] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 70:71:bc:0e:70:62 [ 2.509242] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 2.509292] 0000:00:19.0: eth0: MAC: 9, PHY: 9, PBA No: ffffff-0ff [ 2.628269] usb 2-1: configuration #1 chosen from 1 choice [ 2.628372] hub 2-1:1.0: USB hub found [ 2.628478] hub 2-1:1.0: 6 ports detected [ 2.647880] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.651537] ata3.00: ATAPI: HL-DT-ST BDDVDRW GGC-H20L, 1.03, max UDMA/133 [ 2.656518] ata3.00: configured for UDMA/133 [ 2.707679] usb 1-1.3: new high speed USB device using ehci_hcd and address 3 [ 2.846710] usb 1-1.3: configuration #1 chosen from 1 choice [ 2.919315] usb 1-1.5: new full speed USB device using ehci_hcd and address 4 [ 3.029734] usb 1-1.5: configuration #1 chosen from 1 choice [ 3.029931] hub 1-1.5:1.0: USB hub found [ 3.030140] hub 1-1.5:1.0: 4 ports detected [ 3.108861] usb 2-1.6: new full speed USB device using ehci_hcd and address 3 [ 3.223015] usb 2-1.6: configuration #1 chosen from 1 choice [ 3.318420] usb 1-1.5.1: new low speed USB device using ehci_hcd and address 5 [ 3.471333] usb 1-1.5.1: configuration #1 chosen from 1 choice [ 3.478628] usbcore: registered new interface driver hiddev [ 3.495402] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/input/input3 [ 3.495456] generic-usb 0003:06A3:8020.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:1a.0-1.5.1/input0 [ 3.534729] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.1/input/input4 [ 3.534840] generic-usb 0003:06A3:8020.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:1a.0-1.5.1/input1 [ 3.534852] usbcore: registered new interface driver usbhid [ 3.534853] usbhid: v2.6:USB HID core driver [ 3.557886] usb 1-1.5.4: new full speed USB device using ehci_hcd and address 6 [ 3.683398] usb 1-1.5.4: configuration #1 chosen from 1 choice [ 3.687907] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input5 [ 3.687953] generic-usb 0003:046D:C041.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input0 [ 3.694600] generic-usb 0003:046D:C041.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input1 [ 4.176356] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 4.177763] ata1.15: Port Multiplier 1.1, 0x1095:0x5734 r33, 3 ports, feat 0x1/0x9 [ 4.178320] ata1.00: hard resetting link [ 4.546594] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 4.546738] ata1.01: hard resetting link [ 4.915578] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 4.915724] ata1.02: hard resetting link [ 5.264719] ata1.02: SATA link down (SStatus 0 SControl 320) [ 5.265681] ata1.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133 [ 5.265685] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.266595] ata1.00: configured for UDMA/100 [ 5.267391] ata1.01: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133 [ 5.267395] ata1.01: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.269154] ata1.01: configured for UDMA/100 [ 5.269253] ata1: EH complete [ 5.269328] scsi 0:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5 [ 5.269434] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.269460] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 5.269497] sd 0:0:0:0: [sda] Write Protect is off [ 5.269499] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.269518] scsi 0:1:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5 [ 5.269521] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.269628] sd 0:1:0:0: Attached scsi generic sg1 type 0 [ 5.269640] sda: [ 5.269711] sd 0:1:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 5.269734] sd 0:1:0:0: [sdb] Write Protect is off [ 5.269736] sd 0:1:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.269748] sd 0:1:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.269816] sdb: sda1 [ 5.279300] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.286577] sdb1 [ 5.286808] sd 0:1:0:0: [sdb] Attached SCSI disk [ 7.479116] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 7.480434] ata2.15: Port Multiplier 1.1, 0x197b:0x2352 r0, 2 ports, feat 0x0/0x0 [ 7.480438] ata2.15: Asynchronous notification not supported, hotplug won't [ 7.480440] work on fan-out ports. Use warm-plug instead. [ 7.480839] ata2.00: hard resetting link [ 7.849365] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 7.849431] ata2.01: hard resetting link [ 8.217855] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 8.218680] ata2.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133 [ 8.218685] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 8.219597] ata2.00: configured for UDMA/100 [ 8.221223] ata2.01: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133 [ 8.221227] ata2.01: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.222139] ata2.01: configured for UDMA/100 [ 8.222210] ata2: EH complete [ 8.222271] scsi 1:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5 [ 8.222341] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 8.222368] sd 1:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 8.222396] scsi 1:1:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5 [ 8.222400] sd 1:0:0:0: [sdc] Write Protect is off [ 8.222401] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 8.222416] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.222468] sd 1:1:0:0: Attached scsi generic sg3 type 0 [ 8.222516] sd 1:1:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 8.222539] sd 1:1:0:0: [sdd] Write Protect is off [ 8.222541] sd 1:1:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 8.222554] sd 1:1:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.222563] sdc: [ 8.222620] sdd: [ 8.225749] scsi 2:0:0:0: CD-ROM HL-DT-ST BDDVDRW GGC-H20L 1.03 PQ: 0 ANSI: 5 [ 8.229822] sdd1 [ 8.230072] sd 1:1:0:0: [sdd] Attached SCSI disk [ 8.237402] sdc1 [ 8.237691] sd 1:0:0:0: [sdc] Attached SCSI disk [ 8.557636] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 8.557642] Uniform CD-ROM driver Revision: 3.20 [ 8.557757] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 8.557786] sr 2:0:0:0: Attached scsi generic sg4 type 5 [ 8.557872] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5 [ 8.557975] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 8.557979] sd 3:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 8.558018] sd 3:0:0:0: [sde] Write Protect is off [ 8.558020] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 8.558040] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.558130] sde: sde1 sde2 < sde5 > [ 8.588358] sd 3:0:0:0: [sde] Attached SCSI disk [ 8.810640] EXT4-fs (sde1): mounted filesystem with ordered data mode [ 10.795396] Adding 11133004k swap on /dev/sde5. Priority:-1 extents:1 across:11133004k [ 11.455204] udev: starting version 151 [ 11.729059] udev: renamed network interface eth0 to eth2 [ 12.468966] lp: driver loaded but no devices found [ 12.481489] parport_pc 00:04: reported by Plug and Play ACPI [ 12.481647] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 12.578786] lp0: using parport0 (interrupt-driven). [ 12.733699] type=1505 audit(1289684055.336:2): operation="profile_load" pid=648 name="/sbin/dhclient3" [ 12.734040] type=1505 audit(1289684055.336:3): operation="profile_load" pid=648 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.734224] type=1505 audit(1289684055.336:4): operation="profile_load" pid=648 name="/usr/lib/connman/scripts/dhclient-script" [ 12.764098] usbcore: registered new interface driver usbserial [ 12.764151] USB Serial support registered for generic [ 12.764433] usbcore: registered new interface driver usbserial_generic [ 12.764434] usbserial: USB Serial Driver core [ 12.783386] ppdev: user-space parallel port driver [ 12.787186] USB Serial support registered for FTDI USB Serial Device [ 12.787249] ftdi_sio 2-1.6:1.0: FTDI USB Serial Device converter detected [ 12.787308] usb 2-1.6: Detected FT232RL [ 12.787310] usb 2-1.6: Number of endpoints 2 [ 12.787312] usb 2-1.6: Endpoint 1 MaxPacketSize 64 [ 12.787314] usb 2-1.6: Endpoint 2 MaxPacketSize 64 [ 12.787315] usb 2-1.6: Setting MaxPacketSize 64 [ 12.787638] usb 2-1.6: FTDI USB Serial Device converter now attached to ttyUSB0 [ 12.787668] usbcore: registered new interface driver ftdi_sio [ 12.787669] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver [ 12.857694] Linux video capture interface: v2.00 [ 12.868445] hdpvr 1-1.3:1.0: untested firmware version 0x12, the driver might not work [ 12.922711] type=1505 audit(1289684055.525:5): operation="profile_load" pid=776 name="/usr/sbin/ntpd" [ 12.979939] vga16fb: initializing [ 12.979945] vga16fb: mapped to 0xffff8800000a0000 [ 12.980001] fb0: VGA16 VGA frame buffer device [ 13.237333] hdpvr 1-1.3:1.0: device now attached to /dev/video0 [ 13.237358] usbcore: registered new interface driver hdpvr [ 13.400716] Console: switching to colour frame buffer device 80x30 [ 13.596747] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 13.616266] nvidia: module license 'NVIDIA' taints kernel. [ 13.616270] Disabling lock debugging due to kernel taint [ 13.656489] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 13.656848] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 14.104505] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.104513] nvidia 0000:01:00.0: setting latency timer to 64 [ 14.104518] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 14.104666] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010 [ 14.139416] alloc irq_desc for 22 on node -1 [ 14.139419] alloc kstat_irqs on node -1 [ 14.139426] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 14.139475] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.438559] hda_codec: ALC888: BIOS auto-probing. [ 14.440537] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 14.447206] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 14.447209] hda_intel: Disable MSI for Nvidia chipset [ 14.447286] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 16.968918] type=1505 audit(1289684059.576:6): operation="profile_replace" pid=1084 name="/sbin/dhclient3" [ 16.969278] type=1505 audit(1289684059.586:7): operation="profile_replace" pid=1084 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.969467] type=1505 audit(1289684059.586:8): operation="profile_replace" pid=1084 name="/usr/lib/connman/scripts/dhclient-script" [ 17.159676] e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 17.161512] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 17.325234] type=1505 audit(1289684059.935:9): operation="profile_load" pid=1086 name="/usr/bin/evince" [ 17.330090] type=1505 audit(1289684059.945:10): operation="profile_load" pid=1086 name="/usr/bin/evince-previewer" [ 17.332787] type=1505 audit(1289684059.945:11): operation="profile_load" pid=1086 name="/usr/bin/evince-thumbnailer" [ 19.528733] __ratelimit: 9 callbacks suppressed [ 19.528735] type=1505 audit(1289684062.145:15): operation="profile_replace" pid=1176 name="/usr/sbin/mysqld" [ 27.425623] eth2: no IPv6 routers present [ 27.748093] CPU0 attaching NULL sched-domain. [ 27.748096] CPU1 attaching NULL sched-domain. [ 27.748098] CPU2 attaching NULL sched-domain. [ 27.748099] CPU3 attaching NULL sched-domain. [ 27.844865] CPU0 attaching sched-domain: [ 27.844868] domain 0: span 0-1 level SIBLING [ 27.844870] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 27.844873] domain 1: span 0-3 level MC [ 27.844875] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 27.844880] CPU1 attaching sched-domain: [ 27.844881] domain 0: span 0-1 level SIBLING [ 27.844882] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 27.844885] domain 1: span 0-3 level MC [ 27.844886] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 27.844890] CPU2 attaching sched-domain: [ 27.844891] domain 0: span 2-3 level SIBLING [ 27.844892] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 27.844895] domain 1: span 0-3 level MC [ 27.844896] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 27.844899] CPU3 attaching sched-domain: [ 27.844900] domain 0: span 2-3 level SIBLING [ 27.844902] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 27.844904] domain 1: span 0-3 level MC [ 27.844906] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 27.845215] CPU0 attaching NULL sched-domain. [ 27.845217] CPU1 attaching NULL sched-domain. [ 27.845218] CPU2 attaching NULL sched-domain. [ 27.845219] CPU3 attaching NULL sched-domain. [ 27.974574] CPU0 attaching sched-domain: [ 27.974577] domain 0: span 0-1 level SIBLING [ 27.974579] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 27.974582] domain 1: span 0-3 level MC [ 27.974584] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 27.974588] CPU1 attaching sched-domain: [ 27.974590] domain 0: span 0-1 level SIBLING [ 27.974591] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 27.974594] domain 1: span 0-3 level MC [ 27.974595] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 27.974598] CPU2 attaching sched-domain: [ 27.974599] domain 0: span 2-3 level SIBLING [ 27.974601] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 27.974603] domain 1: span 0-3 level MC [ 27.974605] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 27.974608] CPU3 attaching sched-domain: [ 27.974609] domain 0: span 2-3 level SIBLING [ 27.974611] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 27.974613] domain 1: span 0-3 level MC [ 27.974615] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 30.782196] CPU0 attaching NULL sched-domain. [ 30.782200] CPU1 attaching NULL sched-domain. [ 30.782202] CPU2 attaching NULL sched-domain. [ 30.782203] CPU3 attaching NULL sched-domain. [ 30.858772] CPU0 attaching sched-domain: [ 30.858775] domain 0: span 0-1 level SIBLING [ 30.858777] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 30.858782] domain 1: span 0-3 level MC [ 30.858784] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 30.858789] CPU1 attaching sched-domain: [ 30.858791] domain 0: span 0-1 level SIBLING [ 30.858793] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 30.858797] domain 1: span 0-3 level MC [ 30.858798] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 30.858803] CPU2 attaching sched-domain: [ 30.858804] domain 0: span 2-3 level SIBLING [ 30.858806] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 30.858810] domain 1: span 0-3 level MC [ 30.858811] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 30.858816] CPU3 attaching sched-domain: [ 30.858817] domain 0: span 2-3 level SIBLING [ 30.858819] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 30.858823] domain 1: span 0-3 level MC [ 30.858825] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 30.859243] CPU0 attaching NULL sched-domain. [ 30.859246] CPU1 attaching NULL sched-domain. [ 30.859247] CPU2 attaching NULL sched-domain. [ 30.859249] CPU3 attaching NULL sched-domain. [ 30.988507] CPU0 attaching sched-domain: [ 30.988510] domain 0: span 0-1 level SIBLING [ 30.988512] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 30.988515] domain 1: span 0-3 level MC [ 30.988517] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 30.988522] CPU1 attaching sched-domain: [ 30.988523] domain 0: span 0-1 level SIBLING [ 30.988524] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 30.988527] domain 1: span 0-3 level MC [ 30.988528] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 30.988531] CPU2 attaching sched-domain: [ 30.988533] domain 0: span 2-3 level SIBLING [ 30.988534] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 30.988537] domain 1: span 0-3 level MC [ 30.988538] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 30.988541] CPU3 attaching sched-domain: [ 30.988542] domain 0: span 2-3 level SIBLING [ 30.988544] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 30.988546] domain 1: span 0-3 level MC [ 30.988548] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 789.101163] usb 1-1.5.4: USB disconnect, address 6 [ 1039.654252] usb 1-1.5.4: new full speed USB device using ehci_hcd and address 7 [ 1039.781020] usb 1-1.5.4: configuration #1 chosen from 1 choice [ 1039.785867] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input7 [ 1039.785992] generic-usb 0003:046D:C041.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input0 [ 1039.791604] generic-usb 0003:046D:C041.0006: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input1 [ 1054.745042] usb 1-1.5.4: USB disconnect, address 7 [21862.273748] usb 1-1.5.4: new full speed USB device using ehci_hcd and address 8 [21862.397982] usb 1-1.5.4: configuration #1 chosen from 1 choice [21862.401019] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input8 [21862.401144] generic-usb 0003:046D:C041.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input0 [21862.408918] generic-usb 0003:046D:C041.0008: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input1 [21878.773421] usb 1-1.5.4: USB disconnect, address 8 [21891.777168] usb 1-1.5.4: new full speed USB device using ehci_hcd and address 9 [21891.901755] usb 1-1.5.4: configuration #1 chosen from 1 choice [21891.906803] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input9 [21891.906998] generic-usb 0003:046D:C041.0009: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input0 [21891.911014] generic-usb 0003:046D:C041.000A: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input1 [22233.036638] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [22523.342214] usb 1-1.5.4: USB disconnect, address 9 [101675.903285] usb 1-1.5.4: new full speed USB device using ehci_hcd and address 10 [101676.037254] usb 1-1.5.4: configuration #1 chosen from 1 choice [101676.042187] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input10 [101676.042313] generic-usb 0003:046D:C041.000B: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input0 [101676.046553] generic-usb 0003:046D:C041.000C: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input1 [102068.744075] npviewer.bin[32034]: segfault at f24cd054 ip 00000000f622dda3 sp 00000000ff9a8100 error 4 in libflashplayer.so[f5e8f000+b2c000] [103111.940167] npviewer.bin[32071]: segfault at eb1f504c ip 00000000f61d2dc7 sp 00000000ffe1ce90 error 4 in libflashplayer.so[f5e34000+b2c000] [103136.026188] npviewer.bin[416]: segfault at f58b104c ip 00000000f6226dc7 sp 00000000ffe081f0 error 4 in libflashplayer.so[f5e88000+b2c000] [103160.848132] npviewer.bin[462]: segfault at f586c04c ip 00000000f61e1dc7 sp 00000000ffeb4fe0 error 4 in libflashplayer.so[f5e43000+b2c000] [103737.730577] usb 1-1.5.4: USB disconnect, address 10 [278072.813734] usb 1-1.5.4: new full speed USB device using ehci_hcd and address 11 [278072.937637] usb 1-1.5.4: configuration #1 chosen from 1 choice [278072.941651] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input11 [278072.941768] generic-usb 0003:046D:C041.000D: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input0 [278072.947703] generic-usb 0003:046D:C041.000E: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input1 [278164.655753] usb 1-1.5.4: USB disconnect, address 11 [278851.350040] usb 1-1.5.4: new full speed USB device using ehci_hcd and address 12 [278851.484435] usb 1-1.5.4: configuration #1 chosen from 1 choice [278851.489093] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input12 [278851.489195] generic-usb 0003:046D:C041.000F: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input0 [278851.495562] generic-usb 0003:046D:C041.0010: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input1 [279086.745542] usb 1-1.5.4: USB disconnect, address 12 [360474.297926] usb 1-1.5.4: new full speed USB device using ehci_hcd and address 13 [360474.422376] usb 1-1.5.4: configuration #1 chosen from 1 choice [360474.427545] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input13 [360474.427668] generic-usb 0003:046D:C041.0011: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input0 [360474.431733] generic-usb 0003:046D:C041.0012: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input1 [361197.297576] usb 1-1.5.4: USB disconnect, address 13 [361369.054911] usb 1-1.5.4: new full speed USB device using ehci_hcd and address 14 [361369.178423] usb 1-1.5.4: configuration #1 chosen from 1 choice [361369.183897] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input14 [361369.184094] generic-usb 0003:046D:C041.0013: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input0 [361369.190629] generic-usb 0003:046D:C041.0014: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1.5.4/input1