[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-30-generic (buildd@aatxe) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 (Ubuntu 3.2.0-30.48-generic 3.2.27) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. M61PME-S2/M61PME-S2, BIOS F2 03/07/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f4880] f4880 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 36d18000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 35a40000 - 36d17940 [ 0.000000] Move RAMDISK from 0000000036d18000 - 0000000037fef93f to 35a40000 - 36d1793f [ 0.000000] ACPI: RSDP 000f6250 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 7fff3000 00034 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: FACP 7fff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: DSDT 7fff30c0 043ED (v01 GBT NVDAACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 7fff0000 00040 [ 0.000000] ACPI: HPET 7fff7580 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098) [ 0.000000] ACPI: MCFG 7fff75c0 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: APIC 7fff74c0 00098 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524159 [ 0.000000] free_area_init_node: node 0, pgdat c1822ec0, node_mem_map f4a40200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f77bd000 s31616 r0 d21632 u53248 [ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063 [ 0.000000] Kernel command line: root=UUID=f126ed66-b716-4006-8bc1-7af495b8d913 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 8388096 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0) [ 0.000000] Memory: 2041688k/2097088k available (5618k kernel code, 54948k reserved, 2762k data, 712k init, 1187784k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1830000 - 0xc18e2000 ( 712 kB) [ 0.000000] .data : 0xc157cac4 - 0xc182f5c0 (2762 kB) [ 0.000000] .text : 0xc1000000 - 0xc157cac4 (5618 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f440a000 soft=f440c000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2310.430 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4620.86 BogoMIPS (lpj=9241720) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004038] Security Framework initialized [ 0.004059] AppArmor: AppArmor initialized [ 0.004062] Yama: becoming mindful. [ 0.004128] Mount-cache hash table entries: 512 [ 0.004282] Initializing cgroup subsys cpuacct [ 0.004289] Initializing cgroup subsys memory [ 0.004299] Initializing cgroup subsys devices [ 0.004302] Initializing cgroup subsys freezer [ 0.004305] Initializing cgroup subsys blkio [ 0.004313] Initializing cgroup subsys perf_event [ 0.004337] CPU: Physical Processor ID: 0 [ 0.004340] CPU: Processor Core ID: 0 [ 0.004344] mce: CPU supports 5 MCE banks [ 0.004354] using AMD E400 aware idle routine [ 0.008577] ACPI: Core revision 20110623 [ 0.013595] ftrace: allocating 25901 entries in 51 pages [ 0.016078] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.016534] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057243] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02 [ 0.060003] Performance Events: AMD PMU driver. [ 0.060003] ... version: 0 [ 0.060003] ... bit width: 48 [ 0.060003] ... generic registers: 4 [ 0.060003] ... value mask: 0000ffffffffffff [ 0.060003] ... max period: 00007fffffffffff [ 0.060003] ... fixed-purpose events: 0 [ 0.060003] ... event mask: 000000000000000f [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.060003] CPU 1 irqstacks, hard=f44b2000 soft=f44b4000 [ 0.060003] Booting Node 0, Processors #1 [ 0.060003] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.144121] NMI watchdog enabled, takes one hw-pmu counter. [ 0.144145] Brought up 2 CPUs [ 0.144148] Total of 2 processors activated (9241.80 BogoMIPS). [ 0.144668] devtmpfs: initialized [ 0.144668] EVM: security.selinux [ 0.144668] EVM: security.SMACK64 [ 0.144668] EVM: security.capability [ 0.144668] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes) [ 0.145142] print_constraints: dummy: [ 0.145181] RTC time: 16:36:06, date: 09/21/12 [ 0.145224] NET: Registered protocol family 16 [ 0.145253] Trying to unpack rootfs image as initramfs... [ 0.145368] EISA bus registered [ 0.145373] node 0 link 0: io port [1000, fffff] [ 0.145376] TOM: 0000000080000000 aka 2048M [ 0.145379] node 0 link 0: mmio [e0000000, e7ffffff] [ 0.145383] node 0 link 0: mmio [a0000, bffff] [ 0.145386] node 0 link 0: mmio [80000000, ffb7ffff] [ 0.145389] bus: [00, ff] on node 0 link 0 [ 0.145392] bus: 00 index 0 [io 0x0000-0xffff] [ 0.145394] bus: 00 index 1 [mem 0x80000000-0xffffffff] [ 0.145397] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.145428] ACPI: bus type pci registered [ 0.145495] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xe0000000-0xe7ffffff] (base 0xe0000000) [ 0.145499] PCI: MMCONFIG at [mem 0xe0000000-0xe7ffffff] reserved in E820 [ 0.145501] PCI: Using MMCONFIG for extended config space [ 0.145503] PCI: Using configuration type 1 for base access [ 0.146847] bio: create slab at 0 [ 0.146940] ACPI: Added _OSI(Module Device) [ 0.146942] ACPI: Added _OSI(Processor Device) [ 0.146944] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.146947] ACPI: Added _OSI(Processor Aggregator Device) [ 0.149052] ACPI: EC: Look up EC in DSDT [ 0.152327] ACPI: Interpreter enabled [ 0.152337] ACPI: (supports S0 S1 S4 S5) [ 0.152355] ACPI: Using IOAPIC for interrupt routing [ 0.158134] ACPI: No dock devices found. [ 0.158137] HEST: Table not found. [ 0.158142] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.158194] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.158308] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.158311] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.158314] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.158317] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.158320] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.158347] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500 [ 0.158520] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601 [ 0.158560] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05 [ 0.158572] pci 0000:00:01.1: reg 10: [io 0xe000-0xe03f] [ 0.158588] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] [ 0.158593] pci 0000:00:01.1: reg 24: [io 0xc400-0xc43f] [ 0.158622] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.158628] pci 0000:00:01.1: PME# disabled [ 0.158639] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500 [ 0.158681] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03 [ 0.158690] pci 0000:00:02.0: reg 10: [mem 0xf0107000-0xf0107fff] [ 0.158724] pci 0000:00:02.0: supports D1 D2 [ 0.158727] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.158730] pci 0000:00:02.0: PME# disabled [ 0.158742] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03 [ 0.158753] pci 0000:00:02.1: reg 10: [mem 0xf0106000-0xf01060ff] [ 0.158794] pci 0000:00:02.1: supports D1 D2 [ 0.158796] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.158799] pci 0000:00:02.1: PME# disabled [ 0.158818] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604 [ 0.158858] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403 [ 0.158870] pci 0000:00:05.0: reg 10: [mem 0xf0100000-0xf0103fff] [ 0.158911] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.158914] pci 0000:00:05.0: PME# disabled [ 0.158933] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101 [ 0.158954] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] [ 0.158986] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680 [ 0.158996] pci 0000:00:07.0: reg 10: [mem 0xf0104000-0xf0104fff] [ 0.159001] pci 0000:00:07.0: reg 14: [io 0xc800-0xc807] [ 0.159035] pci 0000:00:07.0: supports D1 D2 [ 0.159037] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.159042] pci 0000:00:07.0: PME# disabled [ 0.159054] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101 [ 0.159063] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7] [ 0.159068] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.159073] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977] [ 0.159078] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73] [ 0.159083] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f] [ 0.159087] pci 0000:00:08.0: reg 24: [mem 0xf0105000-0xf0105fff] [ 0.159123] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604 [ 0.159151] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.159154] pci 0000:00:09.0: PME# disabled [ 0.159177] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.159198] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.159214] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.159230] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.159279] pci 0000:01:06.0: [1131:7146] type 0 class 0x000480 [ 0.159289] pci 0000:01:06.0: reg 10: [mem 0xf0000000-0xf00001ff] [ 0.159338] pci 0000:01:07.0: [4444:0016] type 0 class 0x000400 [ 0.159352] pci 0000:01:07.0: reg 10: [mem 0xe8000000-0xebffffff pref] [ 0.159431] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.159436] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff] [ 0.159439] pci 0000:00:04.0: bridge window [mem 0xe8000000-0xebffffff pref] [ 0.159442] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.159445] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.159448] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.159451] pci 0000:00:04.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.159454] pci 0000:00:04.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.159484] pci 0000:02:00.0: [10de:0421] type 0 class 0x000300 [ 0.159493] pci 0000:02:00.0: reg 10: [mem 0xee000000-0xeeffffff] [ 0.159502] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.159512] pci 0000:02:00.0: reg 1c: [mem 0xec000000-0xedffffff 64bit] [ 0.159518] pci 0000:02:00.0: reg 24: [io 0xb000-0xb07f] [ 0.159525] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.164022] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.164025] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] [ 0.164029] pci 0000:00:09.0: bridge window [mem 0xec000000-0xefffffff] [ 0.164033] pci 0000:00:09.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.164039] pci_bus 0000:00: on NUMA node 0 [ 0.164043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.164183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.164273] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.164277] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.164279] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.179400] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15) [ 0.179447] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 *7 9 10 11 14 15) [ 0.179495] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179540] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179585] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179630] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179675] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179721] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179769] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179814] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179860] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 0.179913] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.179959] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.180003] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.180057] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15) [ 0.180107] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) [ 0.180155] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.180203] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.180255] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.180336] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.180410] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.180486] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.180560] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.180635] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.180710] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.180788] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.180863] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.180938] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled. [ 0.181014] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.181090] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.181166] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.181241] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.181317] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.181394] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.181469] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.181545] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.181621] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.181697] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 0.181818] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.181820] vgaarb: loaded [ 0.181822] vgaarb: bridge control possible 0000:02:00.0 [ 0.181964] i2c-core: driver [aat2870] using legacy suspend method [ 0.181966] i2c-core: driver [aat2870] using legacy resume method [ 0.182057] SCSI subsystem initialized [ 0.182123] libata version 3.00 loaded. [ 0.182180] usbcore: registered new interface driver usbfs [ 0.182193] usbcore: registered new interface driver hub [ 0.182221] usbcore: registered new device driver usb [ 0.182326] PCI: Using ACPI for IRQ routing [ 0.185367] PCI: pci_cache_line_size set to 64 bytes [ 0.185419] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.185422] reserve RAM buffer: 000000007fff0000 - 000000007fffffff [ 0.185538] NetLabel: Initializing [ 0.185540] NetLabel: domain hash size = 128 [ 0.185541] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.185553] NetLabel: unlabeled traffic allowed by default [ 0.185601] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.185608] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.185613] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.192070] Switching to clocksource hpet [ 0.199839] AppArmor: AppArmor Filesystem Enabled [ 0.199880] pnp: PnP ACPI init [ 0.199902] ACPI: bus type pnp registered [ 0.199999] pnp 00:00: [bus 00-ff] [ 0.200038] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.200040] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.200043] pnp 00:00: [io 0x0d00-0xffff window] [ 0.200045] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.200048] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.200051] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.200119] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.200169] pnp 00:01: [io 0x1000-0x107f] [ 0.200172] pnp 00:01: [io 0x1080-0x10ff] [ 0.200174] pnp 00:01: [io 0x1400-0x147f] [ 0.200176] pnp 00:01: [io 0x1480-0x14ff] [ 0.200179] pnp 00:01: [io 0x1800-0x187f] [ 0.200181] pnp 00:01: [io 0x1880-0x18ff] [ 0.200183] pnp 00:01: [mem 0xfefe0000-0xfefe01ff] [ 0.200186] pnp 00:01: [mem 0xfefe1000-0xfefe10ff] [ 0.200188] pnp 00:01: [mem 0x00000000-0xffffffff disabled] [ 0.200244] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.200247] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.200250] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.200253] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.200256] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.200259] system 00:01: [io 0x1880-0x18ff] has been reserved [ 0.200263] system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved [ 0.200266] system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved [ 0.200270] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.200318] pnp 00:02: [io 0x0010-0x001f] [ 0.200321] pnp 00:02: [io 0x0022-0x003f] [ 0.200323] pnp 00:02: [io 0x0044-0x005f] [ 0.200325] pnp 00:02: [io 0x0062-0x0063] [ 0.200327] pnp 00:02: [io 0x0065-0x006f] [ 0.200330] pnp 00:02: [io 0x0074-0x007f] [ 0.200332] pnp 00:02: [io 0x0091-0x0093] [ 0.200334] pnp 00:02: [io 0x00a2-0x00bf] [ 0.200336] pnp 00:02: [io 0x00e0-0x00ef] [ 0.200339] pnp 00:02: [io 0x04d0-0x04d1] [ 0.200341] pnp 00:02: [io 0x0800-0x087f] [ 0.200343] pnp 00:02: [io 0x0295-0x0314] [ 0.200345] pnp 00:02: [io 0x0290-0x0294] [ 0.200400] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.200403] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.200406] system 00:02: [io 0x0295-0x0314] has been reserved [ 0.200409] system 00:02: [io 0x0290-0x0294] has been reserved [ 0.200413] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.200424] pnp 00:03: [dma 4] [ 0.200426] pnp 00:03: [io 0x0000-0x000f] [ 0.200428] pnp 00:03: [io 0x0080-0x0090] [ 0.200430] pnp 00:03: [io 0x0094-0x009f] [ 0.200433] pnp 00:03: [io 0x00c0-0x00df] [ 0.200463] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.200509] pnp 00:04: [irq 0 disabled] [ 0.200520] pnp 00:04: [irq 8] [ 0.200523] pnp 00:04: [mem 0xfeff0000-0xfeff03ff] [ 0.200558] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.200584] pnp 00:05: [io 0x0070-0x0073] [ 0.200617] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.200625] pnp 00:06: [io 0x0061] [ 0.200657] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.200665] pnp 00:07: [io 0x00f0-0x00ff] [ 0.200671] pnp 00:07: [irq 13] [ 0.200706] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.201548] pnp 00:08: [mem 0xe0000000-0xe7ffffff] [ 0.201608] system 00:08: [mem 0xe0000000-0xe7ffffff] has been reserved [ 0.201612] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.201742] pnp 00:09: [mem 0x000d0000-0x000d3fff] [ 0.201745] pnp 00:09: [mem 0x000f0000-0x000f7fff] [ 0.201747] pnp 00:09: [mem 0x000f8000-0x000fbfff] [ 0.201749] pnp 00:09: [mem 0x000fc000-0x000fffff] [ 0.201752] pnp 00:09: [mem 0x7fff0000-0x7fffffff] [ 0.201754] pnp 00:09: [mem 0xffff0000-0xffffffff] [ 0.201756] pnp 00:09: [mem 0x00000000-0x0009ffff] [ 0.201759] pnp 00:09: [mem 0x00100000-0x7ffeffff] [ 0.201761] pnp 00:09: [mem 0x00000000-0xffffffff disabled] [ 0.201764] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.201766] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.201832] system 00:09: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.201835] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.201839] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.201842] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.201845] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved [ 0.201848] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved [ 0.201851] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.201854] system 00:09: [mem 0x00100000-0x7ffeffff] could not be reserved [ 0.201857] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.201861] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.201864] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.201881] pnp: PnP ACPI: found 10 devices [ 0.201882] ACPI: ACPI bus type pnp unregistered [ 0.201886] PnPBIOS: Disabled by ACPI PNP [ 0.238368] PCI: max bus depth: 1 pci_try_num: 2 [ 0.238381] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.238385] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff] [ 0.238389] pci 0000:00:04.0: bridge window [mem 0xe8000000-0xebffffff pref] [ 0.238396] pci 0000:02:00.0: BAR 6: assigned [mem 0xef000000-0xef01ffff pref] [ 0.238400] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.238402] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] [ 0.238406] pci 0000:00:09.0: bridge window [mem 0xec000000-0xefffffff] [ 0.238409] pci 0000:00:09.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.238418] pci 0000:00:04.0: setting latency timer to 64 [ 0.238423] pci 0000:00:09.0: setting latency timer to 64 [ 0.238427] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.238429] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.238432] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.238435] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.238437] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff] [ 0.238440] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf00fffff] [ 0.238443] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xebffffff pref] [ 0.238446] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.238448] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.238451] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.238454] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff] [ 0.238456] pci_bus 0000:01: resource 8 [mem 0x80000000-0xfebfffff] [ 0.238459] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.238462] pci_bus 0000:02: resource 1 [mem 0xec000000-0xefffffff] [ 0.238465] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.238510] NET: Registered protocol family 2 [ 0.238579] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.238846] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.239419] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.239686] TCP: Hash tables configured (established 131072 bind 65536) [ 0.239689] TCP reno registered [ 0.239694] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.239704] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.239799] NET: Registered protocol family 1 [ 0.240052] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.240067] pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.320026] pci 0000:00:02.0: PCI INT A disabled [ 0.320164] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.320173] pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.320183] pci 0000:00:02.1: PCI INT B disabled [ 0.320226] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320275] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320332] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320388] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320449] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.320468] pci 0000:02:00.0: Boot video device [ 0.320471] PCI: CLS 32 bytes, default 64 [ 0.320876] audit: initializing netlink socket (disabled) [ 0.320886] type=2000 audit(1348245366.316:1): initialized [ 0.343010] highmem bounce pool size: 64 pages [ 0.343016] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.345235] VFS: Disk quotas dquot_6.5.2 [ 0.345304] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.345920] fuse init (API version 7.17) [ 0.346031] msgmni has been set to 1667 [ 0.346361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.346389] io scheduler noop registered [ 0.346391] io scheduler deadline registered [ 0.346398] io scheduler cfq registered (default) [ 0.346529] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.346556] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.346625] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.346654] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.346815] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.346821] ACPI: Power Button [PWRB] [ 0.346885] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.346888] ACPI: Power Button [PWRF] [ 0.348810] ERST: Table is not found! [ 0.348812] GHES: HEST is not enabled! [ 0.348925] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.349187] isapnp: Scanning for PnP cards... [ 0.621352] Freeing initrd memory: 19296k freed [ 0.701881] isapnp: No Plug & Play device found [ 0.756515] Linux agpgart interface v0.103 [ 0.758519] brd: module loaded [ 0.759474] loop: module loaded [ 0.759718] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.759932] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 0.759948] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 [ 0.759966] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.759973] pata_acpi 0000:00:08.0: PCI INT A disabled [ 0.760435] Fixed MDIO Bus: probed [ 0.760464] tun: Universal TUN/TAP device driver, 1.6 [ 0.760466] tun: (C) 1999-2004 Max Krasnyansky [ 0.760523] PPP generic driver version 2.4.2 [ 0.760646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.760660] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.760675] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.760678] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.760734] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.760758] ehci_hcd 0000:00:02.1: debug port 1 [ 0.760766] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported [ 0.760785] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf0106000 [ 0.772019] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.772183] hub 1-0:1.0: USB hub found [ 0.772188] hub 1-0:1.0: 10 ports detected [ 0.772275] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.772288] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.772297] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.772300] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.772350] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.772372] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf0107000 [ 0.830130] hub 2-0:1.0: USB hub found [ 0.830135] hub 2-0:1.0: 10 ports detected [ 0.830214] uhci_hcd: USB Universal Host Controller Interface driver [ 0.830279] usbcore: registered new interface driver libusual [ 0.830330] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.830750] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.830757] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.830913] mousedev: PS/2 mouse device common for all mice [ 0.831095] rtc_cmos 00:05: RTC can wake from S4 [ 0.831243] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.831278] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.831352] device-mapper: uevent: version 1.0.3 [ 0.831437] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.831472] EISA: Probing bus 0 at eisa.0 [ 0.831475] EISA: Cannot allocate resource for mainboard [ 0.831478] Cannot allocate resource for EISA slot 1 [ 0.831480] Cannot allocate resource for EISA slot 2 [ 0.831482] Cannot allocate resource for EISA slot 3 [ 0.831485] Cannot allocate resource for EISA slot 4 [ 0.831487] Cannot allocate resource for EISA slot 5 [ 0.831489] Cannot allocate resource for EISA slot 6 [ 0.831492] Cannot allocate resource for EISA slot 7 [ 0.831494] Cannot allocate resource for EISA slot 8 [ 0.831496] EISA: Detected 0 cards. [ 0.831506] cpufreq-nforce2: No nForce2 chipset. [ 0.831509] cpuidle: using governor ladder [ 0.831511] cpuidle: using governor menu [ 0.831513] EFI Variables Facility v0.08 2004-May-17 [ 0.831764] TCP cubic registered [ 0.831900] NET: Registered protocol family 10 [ 0.832481] NET: Registered protocol family 17 [ 0.832486] Registering the dns_resolver key type [ 0.832517] Using IPI No-Shortcut mode [ 0.832655] PM: Hibernation image not present or could not be loaded. [ 0.832667] registered taskstats version 1 [ 0.840183] Magic number: 12:873:641 [ 0.840284] rtc_cmos 00:05: setting system clock to 2012-09-21 16:36:07 UTC (1348245367) [ 0.840292] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2 cpu cores) (version 2.20.00) [ 0.840300] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 0.840301] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 0.840318] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.840320] EDD information not available. [ 0.840461] Freeing unused kernel memory: 712k freed [ 0.840862] Write protecting the kernel text: 5620k [ 0.840905] Write protecting the kernel read-only data: 2324k [ 0.860914] udevd[88]: starting version 175 [ 0.935978] pata_amd 0000:00:06.0: version 0.4.1 [ 0.936058] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.937784] scsi0 : pata_amd [ 0.942689] scsi1 : pata_amd [ 0.943214] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.943218] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.945011] sata_nv 0000:00:08.0: version 3.5 [ 0.945026] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 [ 0.945070] sata_nv 0000:00:08.0: setting latency timer to 64 [ 0.947155] scsi2 : sata_nv [ 0.949291] scsi3 : sata_nv [ 0.949461] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21 [ 0.949464] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21 [ 0.954440] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.954624] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 0.954639] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 [ 0.954644] forcedeth 0000:00:07.0: setting latency timer to 64 [ 1.084019] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.104407] ata1.00: HPA detected: current 586070255, native 586072368 [ 1.104412] ata1.00: ATA-7: SAMSUNG HD300LD, WK100-12, max UDMA/100 [ 1.104415] ata1.00: 586070255 sectors, multi 16: LBA48 [ 1.104424] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13) [ 1.112323] ata1.00: configured for UDMA/100 [ 1.112500] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD300LD WK10 PQ: 0 ANSI: 5 [ 1.112702] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.112740] sd 0:0:0:0: [sda] 586070255 512-byte logical blocks: (300 GB/279 GiB) [ 1.112794] sd 0:0:0:0: [sda] Write Protect is off [ 1.112798] ata2: port disabled--ignoring [ 1.112803] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.112831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.165251] sda: sda1 sda2 < sda5 sda6 > [ 1.165712] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.217743] hub 1-1:1.0: USB hub found [ 1.218059] hub 1-1:1.0: 4 ports detected [ 1.328019] usb 1-2: new high-speed USB device number 3 using ehci_hcd [ 1.416042] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.424123] ata3.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100 [ 1.440122] ata3.00: configured for UDMA/100 [ 1.445411] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5 [ 1.450535] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.450538] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.450674] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.450805] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.464846] Initializing USB Mass Storage driver... [ 1.464972] scsi4 : usb-storage 1-2:1.0 [ 1.465053] usbcore: registered new interface driver usb-storage [ 1.465055] USB Mass Storage support registered. [ 1.476908] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:d0:40:3b:a4 [ 1.476912] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 1.572018] usb 1-4: new high-speed USB device number 4 using ehci_hcd [ 1.888313] usb 1-1.1: new high-speed USB device number 6 using ehci_hcd [ 1.916039] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.924223] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 [ 1.924227] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.932212] ata4.00: configured for UDMA/133 [ 1.932370] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 1.932519] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.932551] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.932570] sd 3:0:0:0: [sdb] Write Protect is off [ 1.932573] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.932595] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.934382] sdb: sdb1 [ 1.934698] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.981459] scsi5 : usb-storage 1-1.1:1.0 [ 2.052320] usb 1-1.2: new high-speed USB device number 7 using ehci_hcd [ 2.147005] scsi6 : usb-storage 1-1.2:1.0 [ 2.216324] usb 1-1.3: new high-speed USB device number 8 using ehci_hcd [ 2.309675] scsi7 : usb-storage 1-1.3:1.0 [ 2.464963] scsi 4:0:0:0: Direct-Access ST350083 0AS E PQ: 0 ANSI: 2 CCS [ 2.465623] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 2.467075] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.467816] sd 4:0:0:0: [sdc] Write Protect is off [ 2.467819] sd 4:0:0:0: [sdc] Mode Sense: 00 38 00 00 [ 2.468565] sd 4:0:0:0: [sdc] Asking for cache data failed [ 2.468568] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 2.470814] sd 4:0:0:0: [sdc] Asking for cache data failed [ 2.470817] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 2.475238] sdc: sdc1 [ 2.478317] sd 4:0:0:0: [sdc] Asking for cache data failed [ 2.478321] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 2.478325] sd 4:0:0:0: [sdc] Attached SCSI disk [ 2.612028] usb 2-5: new full-speed USB device number 2 using ohci_hcd [ 2.828069] hub 2-5:1.0: USB hub found [ 2.831025] hub 2-5:1.0: 4 ports detected [ 2.980716] scsi 5:0:0:0: Direct-Access Generic External 1.13 PQ: 0 ANSI: 4 [ 2.981352] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 2.982496] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.983069] sd 5:0:0:0: [sdd] Write Protect is off [ 2.983072] sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00 [ 2.983566] sd 5:0:0:0: [sdd] No Caching mode page present [ 2.983568] sd 5:0:0:0: [sdd] Assuming drive cache: write through [ 2.985315] sd 5:0:0:0: [sdd] No Caching mode page present [ 2.985318] sd 5:0:0:0: [sdd] Assuming drive cache: write through [ 2.985863] sdd: sdd1 [ 2.987823] sd 5:0:0:0: [sdd] No Caching mode page present [ 2.987826] sd 5:0:0:0: [sdd] Assuming drive cache: write through [ 2.987829] sd 5:0:0:0: [sdd] Attached SCSI disk [ 3.144961] scsi 6:0:0:0: Direct-Access SAMSUNG HD103UI 1113 PQ: 0 ANSI: 2 CCS [ 3.145566] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 3.146033] usb 2-5.1: new low-speed USB device number 3 using ohci_hcd [ 3.146859] sd 6:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.147571] sd 6:0:0:0: [sde] Write Protect is off [ 3.147576] sd 6:0:0:0: [sde] Mode Sense: 00 38 00 00 [ 3.148316] sd 6:0:0:0: [sde] Asking for cache data failed [ 3.148318] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 3.150564] sd 6:0:0:0: [sde] Asking for cache data failed [ 3.150567] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 3.151237] sde: sde1 [ 3.154314] sd 6:0:0:0: [sde] Asking for cache data failed [ 3.154317] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 3.154320] sd 6:0:0:0: [sde] Attached SCSI disk [ 3.275520] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.1/2-5.1:1.0/input/input2 [ 3.275660] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-5.1/input0 [ 3.275685] usbcore: registered new interface driver usbhid [ 3.275687] usbhid: USB HID core driver [ 3.308711] scsi 7:0:0:0: Direct-Access ST350083 0AS PQ: 0 ANSI: 2 CCS [ 3.309310] sd 7:0:0:0: Attached scsi generic sg6 type 0 [ 3.310364] sd 7:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.311071] sd 7:0:0:0: [sdf] Write Protect is off [ 3.311074] sd 7:0:0:0: [sdf] Mode Sense: 28 00 00 00 [ 3.311815] sd 7:0:0:0: [sdf] No Caching mode page present [ 3.311818] sd 7:0:0:0: [sdf] Assuming drive cache: write through [ 3.314065] sd 7:0:0:0: [sdf] No Caching mode page present [ 3.314067] sd 7:0:0:0: [sdf] Assuming drive cache: write through [ 3.342038] usb 2-5.3: new full-speed USB device number 4 using ohci_hcd [ 3.354984] sdf: sdf1 [ 3.361573] sd 7:0:0:0: [sdf] No Caching mode page present [ 3.361577] sd 7:0:0:0: [sdf] Assuming drive cache: write through [ 3.361580] sd 7:0:0:0: [sdf] Attached SCSI disk [ 3.443025] usb 2-5.3: not running at top speed; connect to a high speed hub [ 3.444697] kjournald starting. Commit interval 5 seconds [ 3.444738] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 3.476150] scsi8 : usb-storage 2-5.3:1.0 [ 3.554027] usb 2-5.4: new low-speed USB device number 5 using ohci_hcd [ 3.681499] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.4/2-5.4:1.0/input/input3 [ 3.681614] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.0-5.4/input0 [ 3.695078] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.4/2-5.4:1.1/input/input4 [ 3.695166] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.0-5.4/input1 [ 4.492060] scsi 8:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [ 4.492667] sd 8:0:0:0: Attached scsi generic sg7 type 0 [ 4.527040] sd 8:0:0:0: [sdg] Attached SCSI removable disk [ 30.097768] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.129673] udevd[424]: starting version 175 [ 30.161408] lp: driver loaded but no devices found [ 30.165110] it87: Found IT8716F chip at 0x290, revision 3 [ 30.165134] it87: Beeping is supported [ 30.201950] Adding 1951860k swap on /dev/sda5. Priority:-1 extents:1 across:1951860k [ 30.223414] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 30.223467] i2c i2c-1: nForce2 SMBus adapter at 0xc400 [ 30.498892] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 30.516316] Linux video capture interface: v2.00 [ 30.520597] type=1400 audit(1348238197.176:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=567 comm="apparmor_parser" [ 30.521054] type=1400 audit(1348238197.176:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=567 comm="apparmor_parser" [ 30.521317] type=1400 audit(1348238197.176:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=567 comm="apparmor_parser" [ 30.552294] IR NEC protocol handler initialized [ 30.584660] saa7146: register extension 'budget_ci dvb' [ 30.584865] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 30.584883] budget_ci dvb 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 30.584926] saa7146: found saa7146 @ mem f800e000 (revision 1, irq 16) (0x13c2,0x101a) [ 30.584931] saa7146 (0): dma buffer size 192512 [ 30.584934] DVB: registering new adapter (TT-Budget C-1501 PCI) [ 30.585045] IR RC5(x) protocol handler initialized [ 30.587784] nvidia: module license 'NVIDIA' taints kernel. [ 30.587789] Disabling lock debugging due to kernel taint [ 30.619821] ivtv: Start initialization, version 1.4.3 [ 30.620444] IR RC6 protocol handler initialized [ 30.667064] IR JVC protocol handler initialized [ 30.669160] adapter has MAC addr = 00:d0:5c:c6:5d:a5 [ 30.671057] dvb-usb: found a 'Technotrend TT-connect CT-3650' in warm state. [ 30.682439] IR Sony protocol handler initialized [ 30.695648] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 30.695652] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 30.698004] DVB: registering new adapter (Technotrend TT-connect CT-3650) [ 30.699321] IR MCE Keyboard/mouse protocol handler initialized [ 30.715297] lirc_dev: IR Remote Control driver registered, major 250 [ 30.724062] IR LIRC bridge handler initialized [ 30.724808] Registered IR keymap rc-tt-1500 [ 30.725003] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:04.0/0000:01:06.0/rc/rc0/input5 [ 30.725090] rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:04.0/0000:01:06.0/rc/rc0 [ 30.731086] budget_ci: CI interface initialised [ 30.958705] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... [ 30.958911] ivtv0: Initializing card 0 [ 30.958915] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 30.976225] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 30.976243] ivtv 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 30.976251] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 31.036112] tveeprom 4-0050: Hauppauge model 26154, rev F1B3, serial# 10655560 [ 31.036116] tveeprom 4-0050: tuner model is TCL M2523_3DB_E (idx 113, type 55) [ 31.036120] tveeprom 4-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44) [ 31.036123] tveeprom 4-0050: audio processor is CX25843 (idx 37) [ 31.036125] tveeprom 4-0050: decoder processor is CX25843 (idx 30) [ 31.036128] tveeprom 4-0050: has no radio, has IR receiver, has IR transmitter [ 31.036131] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 31.036133] ivtv0: Reopen i2c bus for IR-blaster support [ 31.067381] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 31.067390] nvidia 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 31.067399] nvidia 0000:02:00.0: setting latency timer to 64 [ 31.067404] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 31.068453] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012 [ 31.070229] ttusb2: CI initialized. [ 31.070236] DVB: registering adapter 1 frontend 0 (Philips TDA10023 DVB-C)... [ 31.071849] type=1400 audit(1348238197.724:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=574 comm="apparmor_parser" [ 31.100191] DVB: registering adapter 1 frontend 1 (NXP TDA10048HN DVB-T)... [ 31.100709] Registered IR keymap rc-tt-1500 [ 31.101031] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-4/rc/rc1/input6 [ 31.101109] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-4/rc/rc1 [ 31.101113] dvb-usb: schedule remote query interval to 150 msecs. [ 31.102186] forcedeth 0000:00:07.0: irq 41 for MSI/MSI-X [ 31.102655] dvb-usb: Technotrend TT-connect CT-3650 successfully initialized and connected. [ 31.102745] usbcore: registered new interface driver dvb_usb_ttusb2 [ 31.416227] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 31.416234] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 31.416239] hda_intel: Disabling MSI [ 31.416264] snd_hda_intel 0000:00:05.0: setting latency timer to 64 [ 31.453204] cx25840 4-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) [ 31.471354] i2c-core: driver [tuner] using legacy suspend method [ 31.471359] i2c-core: driver [tuner] using legacy resume method [ 31.486414] tuner 4-0061: Tuner -1 found with type(s) Radio TV. [ 31.489933] wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 31.525707] tuner-simple 4-0061: creating new instance [ 31.525712] tuner-simple 4-0061: type set to 55 (TCL 2002MB) [ 31.529243] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 31.529367] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 31.530449] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 31.530571] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 31.530574] ivtv0: Initialized card: Hauppauge WinTV PVR-150 [ 31.532119] ivtv: End initialization [ 32.186296] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 32.311169] EXT3-fs (sda1): using internal journal [ 32.384152] ivtv0: Encoder revision: 0x02060039 [ 32.888352] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7 [ 32.896264] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8 [ 32.905444] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9 [ 32.914755] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input10 [ 32.924075] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input11 [ 33.293626] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 34.001790] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 34.053341] kjournald starting. Commit interval 5 seconds [ 34.053771] EXT3-fs (sda6): using internal journal [ 34.053776] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 34.283894] JFS: nTxBlock = 8192, nTxLock = 65536 [ 34.923972] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null) [ 35.115806] init: statd-mounting main process (1106) killed by TERM signal [ 35.132727] RPC: Registered named UNIX socket transport module. [ 35.132731] RPC: Registered udp transport module. [ 35.132734] RPC: Registered tcp transport module. [ 35.132736] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 35.137252] FS-Cache: Loaded [ 35.148229] FS-Cache: Netfs 'nfs' registered for caching [ 35.708559] cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 35.948814] init: udev-fallback-graphics main process (1202) terminated with status 1 [ 41.544013] eth0: no IPv6 routers present [ 235.212440] kjournald starting. Commit interval 5 seconds [ 235.212975] EXT3-fs (sde1): warning: maximal mount count reached, running e2fsck is recommended [ 235.213879] EXT3-fs (sde1): using internal journal [ 235.213884] EXT3-fs (sde1): mounted filesystem with ordered data mode [ 253.355522] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 253.372415] init: screen-cleanup main process (1342) terminated with status 1 [ 253.373329] init: failsafe main process (1347) killed by TERM signal [ 257.523545] ppdev: user-space parallel port driver [ 258.233452] type=1400 audit(1348238424.890:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1430 comm="apparmor_parser" [ 258.233906] type=1400 audit(1348238424.890:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1430 comm="apparmor_parser" [ 258.234170] type=1400 audit(1348238424.890:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1430 comm="apparmor_parser" [ 258.504460] Bluetooth: Core ver 2.16 [ 258.504490] NET: Registered protocol family 31 [ 258.504492] Bluetooth: HCI device and connection manager initialized [ 258.504496] Bluetooth: HCI socket layer initialized [ 258.504498] Bluetooth: L2CAP socket layer initialized [ 258.504505] Bluetooth: SCO socket layer initialized [ 258.543744] Bluetooth: RFCOMM TTY layer initialized [ 258.543750] Bluetooth: RFCOMM socket layer initialized [ 258.543753] Bluetooth: RFCOMM ver 1.11 [ 258.635510] type=1400 audit(1348238425.290:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1429 comm="apparmor_parser" [ 259.145072] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 259.145076] Bluetooth: BNEP filters: protocol multicast [ 259.154399] type=1400 audit(1348238425.810:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1503 comm="apparmor_parser" [ 259.154420] type=1400 audit(1348238425.810:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1481 comm="apparmor_parser" [ 259.154935] type=1400 audit(1348238425.810:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1503 comm="apparmor_parser" [ 259.154963] type=1400 audit(1348238425.810:13): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1481 comm="apparmor_parser" [ 259.248629] type=1400 audit(1348238425.906:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dhcpd" pid=1509 comm="apparmor_parser" [ 259.298525] type=1400 audit(1348238425.954:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dhcpd3" pid=1513 comm="apparmor_parser" [ 261.738528] ttyS0: LSR safety check engaged! [ 261.739326] ttyS0: LSR safety check engaged! [ 263.723705] init: gdm main process (1646) killed by TERM signal [ 272.646365] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 272.661341] NFSD: starting 90-second grace period [ 284.093245] init: mythtv-backend main process (1816) terminated with status 162 [ 284.093281] init: mythtv-backend main process ended, respawning [ 284.492583] init: lightdm main process (1696) terminated with status 1 [ 294.268018] saa7146: saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 295.807133] init: plymouth-stop pre-start process (3102) terminated with status 1 [ 352.007786] init: lightdm main process (3560) terminated with status 1 [ 578.428638] usb 2-5.1: USB disconnect, device number 3 [25745.893586] usb 2-5.1: new low-speed USB device number 6 using ohci_hcd [25746.018093] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.1/2-5.1:1.0/input/input12 [25746.018336] generic-usb 0003:046D:C050.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-5.1/input0 [26139.409400] usb 2-5.1: USB disconnect, device number 6 [35026.465075] usb 2-5.1: new low-speed USB device number 7 using ohci_hcd [35026.590604] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.1/2-5.1:1.0/input/input13 [35026.590862] generic-usb 0003:046D:C050.0005: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-5.1/input0 [63405.222855] init: mythtv-backend main process (2161) killed by TERM signal