| 2021-10-24 10:28:49 |
Marzena Ziomalka |
description |
Tried all of the microphone monitoring settings.
After clicking apply, I never hear sound from microphones,
and from auxiliary on the master channel.
I use the talkover switch and the volume is set correctly.
Because the sound of microphones and auxiliary recorded and broadcast well.
I just can't hear this sound (mics and auxiliary) when my headphone / master balance is set to 100% master channel.
I can only hear the sound when I have 100% preview and use the PFL switch for the microphone and the auxiliary.
I have the latest stable version of Mixxx 2.3 and all the latest operating system updates:
Microsoft Windows 10 Home X64 Version 10.0.19043 Build 19043.
My audio card is built in:
The name Realtek High Definition Audio
Device ID PNP INTELAUDIO \ FUNC_01 & VEN_10EC & DEV_0256 & SUBSYS_19E5320F & REV_1000 \ 4 & 24CA62FF & 0 & 0001
Driver C: \ WINDOWS \ SYSTEM32 \ DRIVERS \ RTKVHD64.SYS (6.0.1.8678,6.50 MB (6,811,424 bytes), 07/04/2021 20:40)
I tried on connected external USB cards and it is exactly the same.
Mic input 1 is set to the built-in realtek microphone,
auxiliary input to virtual cable.
for all microphone monitoring modes I cannot hear its sound to the master channel.
Unfortunately, it was the same in the previous version of Mixxx before the update.
Best regards. |
Tried all microphone monitoring settings.
After clicking apply, I never hear sound from microphones,
and from auxiliary on the master channel.
I use the talkover switch and the volume is set correctly.
Because the sound of microphones and auxiliary recorded and broadcast well.
I just can't hear this sound (mics and auxiliary) when my headphone / master balance is set to 100% master channel.
I can only hear the sound when I have 100% preview and use the PFL switch for the microphone and the auxiliary.
I have the latest stable version of Mixxx 2.3.1 and all the latest operating system updates:
Microsoft Windows 10 Home X64 Version 10.0.19043 Build 19043.
My audio card is built in:
The name Realtek High Definition Audio
Device ID PNP INTELAUDIO \ FUNC_01 & VEN_10EC & DEV_0256 & SUBSYS_19E5320F & REV_1000 \ 4 & 24CA62FF & 0 & 0001
Driver C: \ WINDOWS \ SYSTEM32 \ DRIVERS \ RTKVHD64.SYS (6.0.1.8678,6.50 MB (6,811,424 bytes), 07/04/2021 20:40)
processor Intel (R) Core (TM) i7-8565U
I tried on connected external USB cards and it is exactly the same.
Mic input 1 is set to the built-in realtek microphone,
auxiliary input to virtual cable.
for all microphone monitoring modes I cannot hear its sound to the master channel.
Unfortunately, it was the same in the previous version of Mixxx before the update.
Best regards. |
|
