#************************************************************ #* MadGraph5_aMC@NLO/MadEvent * #* * #* * * * #* * * * * * #* * * * * 5 * * * * * #* * * * * * #* * * * #* * #* * #* VERSION 2.6.3.2 2018-06-22 * #* * #* The MadGraph5_aMC@NLO Development Team - Find us at * #* https://server06.fynu.ucl.ac.be/projects/madgraph * #* * #************************************************************ #* * #* Command File for MadEvent * #* * #* run as ./bin/madevent.py filename * #* * #************************************************************ generate_events run_02 Traceback (most recent call last): File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/extended_cmd.py", line 1501, in onecmd return self.onecmd_orig(line, **opt) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/extended_cmd.py", line 1450, in onecmd_orig return func(arg, **opt) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/madevent_interface.py", line 2469, in do_generate_events self.run_generate_events(switch_mode, args) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/common_run_interface.py", line 6711, in new_fct original_fct(obj, *args, **opts) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/madevent_interface.py", line 2573, in run_generate_events self.exec_cmd('shower --no_default', postcmd=False, printcmd=False) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/extended_cmd.py", line 1528, in exec_cmd stop = Cmd.onecmd_orig(current_interface, line, **opt) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/extended_cmd.py", line 1450, in onecmd_orig return func(arg, **opt) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/madevent_interface.py", line 3806, in do_shower postcmd=False, printcmd=False) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/extended_cmd.py", line 1528, in exec_cmd stop = Cmd.onecmd_orig(current_interface, line, **opt) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/extended_cmd.py", line 1450, in onecmd_orig return func(arg, **opt) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/interface/madevent_interface.py", line 4472, in do_pythia8 self.cluster.wait(parallelization_dir,wait_monitoring) File "/scratch/mbeekveld/MG5_aMC_v2_6_3_2/madgraph/various/cluster.py", line 822, in wait raise Exception, self.fail_msg Exception: program /scratch/mbeekveld/MG5_aMC_v2_6_3_2/bin/Wene_jets/Events/run_02/PY8_parallelization/run_PY8.sh 26 launch ends with non zero status: 139. Stop all computation Run Options ----------- stdout_level : 20 (user set) MadEvent Options ---------------- automatic_html_opening : False (user set) notification_center : True cluster_temp_path : None cluster_memory : None (user set) cluster_size : 100 cluster_queue : None (user set) nb_core : 40 (user set) cluster_time : 40 (user set) run_mode : 2 Configuration Options --------------------- text_editor : None cluster_local_path : None cluster_status_update : (600, 30) pythia8_path : /scratch/mbeekveld/MG5_aMC_v2_6_3_2/HEPTools/pythia8 (user set) hwpp_path : None (user set) pythia-pgs_path : None (user set) td_path : None (user set) delphes_path : /scratch/mbeekveld/MG5_aMC_v2_6_3_2/Delphes (user set) thepeg_path : None (user set) cluster_type : condor madanalysis5_path : None (user set) cluster_nb_retry : 1 eps_viewer : None web_browser : None syscalc_path : None (user set) madanalysis_path : None (user set) lhapdf : lhapdf-config f2py_compiler : None hepmc_path : None (user set) cluster_retry_wait : 300 fortran_compiler : None auto_update : 7 (user set) exrootanalysis_path : None (user set) timeout : 60 cpp_compiler : None #************************************************************ #* MadGraph5_aMC@NLO * #* * #* * * * #* * * * * * #* * * * * 5 * * * * * #* * * * * * #* * * * #* * #* * #* VERSION 2.6.3.2 2018-06-22 * #* * #* The MadGraph5_aMC@NLO Development Team - Find us at * #* https://server06.fynu.ucl.ac.be/projects/madgraph * #* * #************************************************************ #* * #* Command File for MadGraph5_aMC@NLO * #* * #* run as ./bin/mg5_aMC filename * #* * #************************************************************ set default_unset_couplings 99 set group_subprocesses Auto set ignore_six_quark_processes False set loop_optimized_output True set loop_color_flows False set gauge unitary set complex_mass_scheme False set max_npoint_for_channel 0 import model sm define p = g u c d s u~ c~ d~ s~ define j = g u c d s u~ c~ d~ s~ define l+ = e+ mu+ define l- = e- mu- define vl = ve vm vt define vl~ = ve~ vm~ vt~ define eall = e+ e- define veall = ve ve~ define muall = mu+ mu- define vmall = vm vm~ define taall = ta+ ta- define vtall = vt vt~ define w = w+ w- define tall = t t~ define ball = b b~ define p = g u c d s b u~ c~ d~ s~ b~ define j = g u c d s b u~ c~ d~ s~ b~ generate p p > eall veall @0 add process p p > eall veall j @1 add process p p > eall veall j j @2 output Wene_jets ###################################################################### ## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL #### ###################################################################### ## ## ## Width set on Auto will be computed following the information ## ## present in the decay.py files of the model. ## ## See arXiv:1402.1178 for more details. ## ## ## ###################################################################### ################################### ## INFORMATION FOR MASS ################################### Block mass 5 4.700000e+00 # MB 6 1.730000e+02 # MT 15 1.777000e+00 # MTA 23 9.118800e+01 # MZ 25 1.250000e+02 # MH ## Dependent parameters, given by model restrictions. ## Those values should be edited following the ## analytical expression. MG5 ignores those values ## but they are important for interfacing the output of MG5 ## to external program such as Pythia. 1 0.000000 # d : 0.0 2 0.000000 # u : 0.0 3 0.000000 # s : 0.0 4 0.000000 # c : 0.0 11 0.000000 # e- : 0.0 12 0.000000 # ve : 0.0 13 0.000000 # mu- : 0.0 14 0.000000 # vm : 0.0 16 0.000000 # vt : 0.0 21 0.000000 # g : 0.0 22 0.000000 # a : 0.0 24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4. - (aEW*cmath.pi*MZ__exp__2)/(Gf*sqrt__2))) ################################### ## INFORMATION FOR SMINPUTS ################################### Block sminputs 1 1.325070e+02 # aEWM1 2 1.166390e-05 # Gf 3 1.180000e-01 # aS ################################### ## INFORMATION FOR YUKAWA ################################### Block yukawa 5 4.700000e+00 # ymb 6 1.730000e+02 # ymt 15 1.777000e+00 # ymtau ################################### ## INFORMATION FOR DECAY ################################### DECAY 6 1.491500e+00 # WT DECAY 23 2.441404e+00 # WZ DECAY 24 2.047600e+00 # WW DECAY 25 6.382339e-03 # WH ## Dependent parameters, given by model restrictions. ## Those values should be edited following the ## analytical expression. MG5 ignores those values ## but they are important for interfacing the output of MG5 ## to external program such as Pythia. DECAY 1 0.000000 # d : 0.0 DECAY 2 0.000000 # u : 0.0 DECAY 3 0.000000 # s : 0.0 DECAY 4 0.000000 # c : 0.0 DECAY 5 0.000000 # b : 0.0 DECAY 11 0.000000 # e- : 0.0 DECAY 12 0.000000 # ve : 0.0 DECAY 13 0.000000 # mu- : 0.0 DECAY 14 0.000000 # vm : 0.0 DECAY 15 0.000000 # ta- : 0.0 DECAY 16 0.000000 # vt : 0.0 DECAY 21 0.000000 # g : 0.0 DECAY 22 0.000000 # a : 0.0 #********************************************************************* # MadGraph5_aMC@NLO * # * # run_card.dat MadEvent * # * # This file is used to set the parameters of the run. * # * # Some notation/conventions: * # * # Lines starting with a '# ' are info or comments * # * # mind the format: value = variable ! comment * #********************************************************************* # #******************* # Running parameters #******************* # #********************************************************************* # Tag name for the run (one word) * #********************************************************************* tag_1 = run_tag ! name of the run #********************************************************************* # Number of events and rnd seed * # Warning: Do not generate more than 1M events in a single run * # If you want to run Pythia, avoid more than 50k events in a run. * #********************************************************************* 10000 = nevents ! Number of unweighted events requested 0 = iseed ! rnd seed (0=assigned automatically=default)) #********************************************************************* # Collider type and energy * # lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton, * # 3=photon from electron * #********************************************************************* 1 = lpp1 ! beam 1 type 1 = lpp2 ! beam 2 type 6500.0 = ebeam1 ! beam 1 total energy in GeV 6500.0 = ebeam2 ! beam 2 total energy in GeV #********************************************************************* # Beam polarization from -100 (left-handed) to 100 (right-handed) * #********************************************************************* 0.0 = polbeam1 ! beam polarization for beam 1 0.0 = polbeam2 ! beam polarization for beam 2 #********************************************************************* # PDF CHOICE: this automatically fixes also alpha_s and its evol. * #********************************************************************* nn23lo1 = pdlabel ! PDF set 230000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number #********************************************************************* # Renormalization and factorization scales * #********************************************************************* False = fixed_ren_scale ! if .true. use fixed ren scale False = fixed_fac_scale ! if .true. use fixed fac scale 91.188 = scale ! fixed ren scale 91.188 = dsqrt_q2fact1 ! fixed fact scale for pdf1 91.188 = dsqrt_q2fact2 ! fixed fact scale for pdf2 -1 = dynamical_scale_choice ! Choose one of the preselected dynamical choices 1.0 = scalefact ! scale factor for event-by-event scales #********************************************************************* # Type and output format #********************************************************************* False = gridpack !True = setting up the grid pack -1.0 = time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written) 3.0 = lhe_version ! Change the way clustering information pass to shower. True = clusinfo ! include clustering tag in output average = event_norm ! average/sum. Normalization of the weight in the LHEF #********************************************************************* # Matching parameter (MLM only) #********************************************************************* 0 = ickkw ! 0 no matching, 1 MLM 1.0 = alpsfact ! scale factor for QCD emission vx False = chcluster ! cluster only according to channel diag 5 = asrwgtflavor ! highest quark flavor for a_s reweight False = auto_ptj_mjj ! Automatic setting of ptj and mjj if xqcut >0 ! (turn off for VBF and single top processes) 0 = xqcut ! minimum kt jet measure between partons #********************************************************************* # #********************************************************************* # handling of the helicities: # 0: sum over all helicities # 1: importance sampling over helicities #********************************************************************* 0 = nhel ! using helicities importance sampling or not. #********************************************************************* # Generation bias, check the wiki page below for more information: * # 'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' * #********************************************************************* None = bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-] {} = bias_parameters ! Specifies the parameters of the module. # #******************************* # Parton level cuts definition * #******************************* # # #********************************************************************* # BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay #********************************************************************* 15.0 = bwcutoff ! (M+/-bwcutoff*Gamma) #********************************************************************* # Apply pt/E/eta/dr/mij/kt_durham cuts on decay products or not # (note that etmiss/ptll/ptheavy/ht/sorted cuts always apply) #********************************************************************* False = cut_decays ! Cut decay products #********************************************************************* # Standard Cuts * #********************************************************************* # Minimum and maximum pt's (for max, -1 means no cut) * #********************************************************************* 20.0 = ptj ! minimum pt for the jets 20.0 = ptb ! minimum pt for the b 20.0 = pta ! minimum pt for the photons 15.0 = ptl ! minimum pt for the charged leptons 0.0 = misset ! minimum missing Et (sum of neutrino's momenta) -1.0 = ptjmax ! maximum pt for the jets -1.0 = ptbmax ! maximum pt for the b -1.0 = ptamax ! maximum pt for the photons -1.0 = ptlmax ! maximum pt for the charged leptons -1.0 = missetmax ! maximum missing Et (sum of neutrino's momenta) {} = pt_min_pdg ! pt cut for other particles (use pdg code). Applied on particle and anti-particle {} = pt_max_pdg ! pt cut for other particles (syntax e.g. {6: 100, 25: 50}) #********************************************************************* # Minimum and maximum E's (in the center of mass frame) * #********************************************************************* 0.0 = ej ! minimum E for the jets 0.0 = eb ! minimum E for the b 0.0 = ea ! minimum E for the photons 0.0 = el ! minimum E for the charged leptons -1.0 = ejmax ! maximum E for the jets -1.0 = ebmax ! maximum E for the b -1.0 = eamax ! maximum E for the photons -1.0 = elmax ! maximum E for the charged leptons {} = e_min_pdg ! E cut for other particles (use pdg code). Applied on particle and anti-particle {} = e_max_pdg ! E cut for other particles (syntax e.g. {6: 100, 25: 50}) #********************************************************************* # Maximum and minimum absolute rapidity (for max, -1 means no cut) * #********************************************************************* 2.8 = etaj ! max rap for the jets 2.5 = etab ! max rap for the b 2.37 = etaa ! max rap for the photons 2.7 = etal ! max rap for the charged leptons 0.0 = etajmin ! min rap for the jets 0.0 = etabmin ! min rap for the b 0.0 = etaamin ! min rap for the photons 0.0 = etalmin ! main rap for the charged leptons {} = eta_min_pdg ! rap cut for other particles (use pdg code). Applied on particle and anti-particle {} = eta_max_pdg ! rap cut for other particles (syntax e.g. {6: 2.5, 23: 5}) #********************************************************************* # Minimum and maximum DeltaR distance * #********************************************************************* 0.4 = drjj ! min distance between jets 0.4 = drbb ! min distance between b's 0.4 = drll ! min distance between leptons 0.4 = draa ! min distance between gammas 0.4 = drbj ! min distance between b and jet 0.4 = draj ! min distance between gamma and jet 0.2 = drjl ! min distance between jet and lepton 0.4 = drab ! min distance between gamma and b 0.4 = drbl ! min distance between b and lepton 0.4 = dral ! min distance between gamma and lepton -1.0 = drjjmax ! max distance between jets -1.0 = drbbmax ! max distance between b's -1.0 = drllmax ! max distance between leptons -1.0 = draamax ! max distance between gammas -1.0 = drbjmax ! max distance between b and jet -1.0 = drajmax ! max distance between gamma and jet -1.0 = drjlmax ! max distance between jet and lepton -1.0 = drabmax ! max distance between gamma and b -1.0 = drblmax ! max distance between b and lepton -1.0 = dralmax ! maxdistance between gamma and lepton #********************************************************************* # Minimum and maximum invariant mass for pairs * # WARNING: for four lepton final state mmll cut require to have * # different lepton masses for each flavor! * #********************************************************************* 0.0 = mmjj ! min invariant mass of a jet pair 0.0 = mmbb ! min invariant mass of a b pair 0.0 = mmaa ! min invariant mass of gamma gamma pair 0.0 = mmll ! min invariant mass of l+l- (same flavour) lepton pair -1.0 = mmjjmax ! max invariant mass of a jet pair -1.0 = mmbbmax ! max invariant mass of a b pair -1.0 = mmaamax ! max invariant mass of gamma gamma pair -1.0 = mmllmax ! max invariant mass of l+l- (same flavour) lepton pair {} = mxx_min_pdg ! min invariant mass of a pair of particles X/X~ (e.g. {6:250}) {'default': False} = mxx_only_part_antipart ! if True the invariant mass is applied only ! to pairs of particle/antiparticle and not to pairs of the same pdg codes. #********************************************************************* # Minimum and maximum invariant mass for all letpons * #********************************************************************* 0.0 = mmnl ! min invariant mass for all letpons (l+- and vl) -1.0 = mmnlmax ! max invariant mass for all letpons (l+- and vl) #********************************************************************* # Minimum and maximum pt for 4-momenta sum of leptons * #********************************************************************* 0.0 = ptllmin ! Minimum pt for 4-momenta sum of leptons(l and vl) -1.0 = ptllmax ! Maximum pt for 4-momenta sum of leptons(l and vl) #********************************************************************* # Inclusive cuts * #********************************************************************* 0.0 = ptheavy ! minimum pt for at least one heavy final state 0.0 = xptj ! minimum pt for at least one jet 0.0 = xptb ! minimum pt for at least one b 0.0 = xpta ! minimum pt for at least one photon 0.0 = xptl ! minimum pt for at least one charged lepton #********************************************************************* # Control the pt's of the jets sorted by pt * #********************************************************************* 0.0 = ptj1min ! minimum pt for the leading jet in pt 0.0 = ptj2min ! minimum pt for the second jet in pt 0.0 = ptj3min ! minimum pt for the third jet in pt 0.0 = ptj4min ! minimum pt for the fourth jet in pt -1.0 = ptj1max ! maximum pt for the leading jet in pt -1.0 = ptj2max ! maximum pt for the second jet in pt -1.0 = ptj3max ! maximum pt for the third jet in pt -1.0 = ptj4max ! maximum pt for the fourth jet in pt 0 = cutuse ! reject event if fails any (0) / all (1) jet pt cuts #********************************************************************* # Control the pt's of leptons sorted by pt * #********************************************************************* 0.0 = ptl1min ! minimum pt for the leading lepton in pt 0.0 = ptl2min ! minimum pt for the second lepton in pt 0.0 = ptl3min ! minimum pt for the third lepton in pt 0.0 = ptl4min ! minimum pt for the fourth lepton in pt -1.0 = ptl1max ! maximum pt for the leading lepton in pt -1.0 = ptl2max ! maximum pt for the second lepton in pt -1.0 = ptl3max ! maximum pt for the third lepton in pt -1.0 = ptl4max ! maximum pt for the fourth lepton in pt #********************************************************************* # Control the Ht(k)=Sum of k leading jets * #********************************************************************* 0.0 = htjmin ! minimum jet HT=Sum(jet pt) -1.0 = htjmax ! maximum jet HT=Sum(jet pt) 0.0 = ihtmin !inclusive Ht for all partons (including b) -1.0 = ihtmax !inclusive Ht for all partons (including b) 0.0 = ht2min ! minimum Ht for the two leading jets 0.0 = ht3min ! minimum Ht for the three leading jets 0.0 = ht4min ! minimum Ht for the four leading jets -1.0 = ht2max ! maximum Ht for the two leading jets -1.0 = ht3max ! maximum Ht for the three leading jets -1.0 = ht4max ! maximum Ht for the four leading jets #*********************************************************************** # Photon-isolation cuts, according to hep-ph/9801442 * # When ptgmin=0, all the other parameters are ignored * # When ptgmin>0, pta and draj are not going to be used * #*********************************************************************** 0.0 = ptgmin ! Min photon transverse momentum 0.4 = R0gamma ! Radius of isolation code 1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442 1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/9801442 True = isoEM ! isolate photons from EM energy (photons and leptons) #********************************************************************* # WBF cuts * #********************************************************************* 0.0 = xetamin ! minimum rapidity for two jets in the WBF case 0.0 = deltaeta ! minimum rapidity for two jets in the WBF case #*********************************************************************** # Turn on either the ktdurham or ptlund cut to activate * # CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829] * #*********************************************************************** 100 = ktdurham 0.4 = dparameter -1.0 = ptlund 1, 2, 3, 4, 5, 6, 21 = pdgs_for_merging_cut ! PDGs for two cuts above #********************************************************************* # maximal pdg code for quark to be considered as a light jet * # (otherwise b cuts are applied) * #********************************************************************* 5 = maxjetflavor ! Maximum jet pdg code #********************************************************************* # #********************************************************************* # Store info for systematics studies * # WARNING: Do not use for interference type of computation * #********************************************************************* True = use_syst ! Enable systematics studies # #************************************** # Parameter of the systematics study # will be used by SysCalc (if installed) #************************************** # 0.5 1 2 = sys_scalefact # factorization/renormalization scale factor None = sys_alpsfact # \alpha_s emission scale factors auto = sys_matchscale # variation of merging scale # PDF sets and number of members (0 or none for all members). NNPDF23_lo_as_0130_qed = sys_pdf # list of pdf sets # MSTW2008nlo68cl.LHgrid 1 = sys_pdf #