[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf50000 (usable) [ 0.000000] BIOS-e820: 000000007bf50000 - 000000007bf65000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bf65000 - 000000007bf66000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bf66000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 1087MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f8220 [ 0.000000] Entering add_active_range(0, 0, 507728) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 507728 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 507728 [ 0.000000] On node 0 totalpages: 507728 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2174 pages used for memmap [ 0.000000] HighMem zone: 276178 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F8250 checksum 0 [ 0.000000] ACPI: RSDP 000F8250, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7BF5C0FB, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 7BF649BA, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 7BF5C167, 87DF (r1 NVIDIA MCP67 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 7BF65FC0, 0040 [ 0.000000] ACPI: TCPA 7BF64AAE, 0032 (r1 Phoeni x 6040000 TL 0) [ 0.000000] ACPI: SRAT 7BF64AE0, 00A0 (r1 AMD HAMMER 6040000 AMD 1) [ 0.000000] ACPI: SSDT 7BF64B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG 7BF64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 7BF64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC 7BF64DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7BF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7BF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503762 [ 0.000000] Kernel command line: root=UUID=6c1d1f33-b7c8-4c7c-9170-ad39bf061cef ro apic=debug [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2000.335 MHz processor. [ 30.561514] spurious 8259A interrupt: IRQ7. [ 30.564802] Console: colour VGA+ 80x25 [ 30.564804] console [tty0] enabled [ 30.569095] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 30.569501] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 30.649001] Memory: 2001480k/2030912k available (2177k kernel code, 28188k reserved, 1006k data, 368k init, 1113408k highmem) [ 30.649085] virtual kernel memory layout: [ 30.649086] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 30.649088] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 30.649089] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 30.649090] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 30.649091] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 30.649092] .data : 0xc0320474 - 0xc041bdc4 (1006 kB) [ 30.649093] .text : 0xc0100000 - 0xc0320474 (2177 kB) [ 30.649570] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 30.649717] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 30.649920] hpet clockevent registered [ 30.729776] Calibrating delay using timer specific routine.. 4004.47 BogoMIPS (lpj=8008948) [ 30.729911] Security Framework initialized [ 30.729973] SELinux: Disabled at boot. [ 30.730042] AppArmor: AppArmor initialized [ 30.730103] Failure registering capabilities with primary security module. [ 30.730172] Mount-cache hash table entries: 512 [ 30.730327] Initializing cgroup subsys ns [ 30.730389] Initializing cgroup subsys cpuacct [ 30.730455] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 30.730464] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 30.730527] CPU: L2 Cache: 512K (64 bytes/line) [ 30.730588] CPU 0(2) -> Core 0 [ 30.730646] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 30.730655] Compat vDSO mapped to ffffe000. [ 30.730722] Checking 'hlt' instruction... OK. [ 30.746040] SMP alternatives: switching to UP code [ 30.747160] Early unpacking initramfs... done [ 31.050966] ACPI: Core revision 20070126 [ 31.051091] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 31.459775] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 31.459930] Getting VERSION: 80050010 [ 31.459988] Getting VERSION: 80050010 [ 31.460047] Getting ID: 0 [ 31.460104] Getting LVT0: 10000 [ 31.460161] Getting LVT1: 10000 [ 31.460221] masked ExtINT on CPU#0 [ 31.460287] SMP alternatives: switching to SMP code [ 31.460747] Booting processor 1/1 eip 3000 [ 31.470042] Initializing CPU#1 [ 31.470968] masked ExtINT on CPU#1 [ 31.547485] Calibrating delay using timer specific routine.. 4000.39 BogoMIPS (lpj=8000781) [ 31.547491] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 31.547497] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 31.547500] CPU: L2 Cache: 512K (64 bytes/line) [ 31.547502] CPU 1(2) -> Core 1 [ 31.547503] AMD C1E detected late. Force timer broadcast. [ 31.547505] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 31.548387] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 31.548968] Total of 2 processors activated (8004.86 BogoMIPS). [ 31.549266] ENABLING IO-APIC IRQs [ 31.549324] init IO_APIC IRQs [ 31.549326] IO-APIC (apicid-pin) 2-0 not connected. [ 31.549412] IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. [ 31.549561] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 31.589377] Brought up 2 CPUs [ 31.589477] CPU0 attaching sched-domain: [ 31.589479] domain 0: span 03 [ 31.589481] groups: 01 02 [ 31.589484] CPU1 attaching sched-domain: [ 31.589485] domain 0: span 03 [ 31.589487] groups: 02 01 [ 31.589664] net_namespace: 64 bytes [ 31.589728] Booting paravirtualized kernel on bare hardware [ 31.590216] Time: 10:15:17 Date: 08/04/08 [ 31.590296] NET: Registered protocol family 16 [ 31.590523] EISA bus registered [ 31.590586] ACPI: bus type pci registered [ 31.611634] PCI: PCI BIOS revision 3.00 entry at 0xfddad, last bus=5 [ 31.611697] PCI: Using configuration type 1 [ 31.611762] Setting up standard PCI resources [ 31.613453] ACPI: EC: Look up EC in DSDT [ 31.615099] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 31.615702] ACPI: Interpreter enabled [ 31.615762] ACPI: (supports S0 S3 S4 S5) [ 31.616007] ACPI: Using IOAPIC for interrupt routing [ 31.615794] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 31.622885] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 31.622950] ACPI: EC: driver started in interrupt mode [ 31.623063] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 31.623999] PCI: Transparent bridge - 0000:00:08.0 [ 31.624232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 31.624311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 31.624330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 31.624358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 31.653933] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 [ 31.654356] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 31.654774] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 31.655236] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 31.655699] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 31.656161] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 31.656623] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 31.657085] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 31.657513] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 31.657885] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 31.658302] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 31.658719] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 31.659137] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 31.659554] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 31.659972] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 31.660434] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 31.660852] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 31.661275] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 31.661693] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 31.662009] Linux Plug and Play Support v0.97 (c) Adam Belay [ 31.662095] pnp: PnP ACPI init [ 31.662160] ACPI: bus type pnp registered [ 31.662513] IOAPIC[0]: Set PCI routing entry (2-8 -> 0x69 -> IRQ 8 Mode:0 Active:0) [ 31.663064] IOAPIC[0]: Set PCI routing entry (2-13 -> 0x91 -> IRQ 13 Mode:0 Active:0) [ 31.663122] IOAPIC[0]: Set PCI routing entry (2-1 -> 0x39 -> IRQ 1 Mode:0 Active:0) [ 31.663178] IOAPIC[0]: Set PCI routing entry (2-12 -> 0x89 -> IRQ 12 Mode:0 Active:0) [ 31.664371] pnp: PnP ACPI: found 12 devices [ 31.664439] ACPI: ACPI bus type pnp unregistered [ 31.664500] PnPBIOS: Disabled by ACPI PNP [ 31.664779] PCI: Using ACPI for IRQ routing [ 31.664840] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 31.664915] number of MP IRQ sources: 15. [ 31.664916] number of IO-APIC #2 registers: 24. [ 31.664918] testing the IO APIC....................... [ 31.664983] IO APIC #2...... [ 31.664985] .... register #00: 02000000 [ 31.664986] ....... : physical APIC id: 02 [ 31.664988] ....... : Delivery Type: 0 [ 31.664989] ....... : LTS : 0 [ 31.664990] .... register #01: 00170011 [ 31.664992] ....... : max redirection entries: 0017 [ 31.664993] ....... : PRQ implemented: 0 [ 31.664995] ....... : IO APIC version: 0011 [ 31.664996] .... register #02: 02000000 [ 31.664998] ....... : arbitration: 02 [ 31.664999] .... IRQ redirection table: [ 31.665001] NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: [ 31.665006] 00 000 00 1 0 0 0 0 0 0 00 [ 31.665012] 01 003 03 1 0 0 0 0 1 1 39 [ 31.665018] 02 003 03 0 0 0 0 0 1 1 31 [ 31.665024] 03 003 03 0 0 0 0 0 1 1 41 [ 31.665030] 04 003 03 0 0 0 0 0 1 1 49 [ 31.665036] 05 003 03 1 0 0 0 0 1 1 51 [ 31.665042] 06 003 03 0 0 0 0 0 1 1 59 [ 31.665048] 07 003 03 1 0 0 0 0 1 1 61 [ 31.665054] 08 003 03 1 0 0 0 0 1 1 69 [ 31.665059] 09 003 03 0 1 0 1 0 1 1 71 [ 31.665065] 0a 003 03 1 0 0 0 0 1 1 79 [ 31.665071] 0b 003 03 1 0 0 0 0 1 1 81 [ 31.665078] 0c 003 03 1 0 0 0 0 1 1 89 [ 31.665084] 0d 003 03 1 0 0 0 0 1 1 91 [ 31.665090] 0e 003 03 0 0 0 0 0 1 1 99 [ 31.665096] 0f 003 03 0 0 0 0 0 1 1 A1 [ 31.665102] 10 000 00 1 0 0 0 0 0 0 00 [ 31.665108] 11 000 00 1 0 0 0 0 0 0 00 [ 31.665114] 12 000 00 1 0 0 0 0 0 0 00 [ 31.665120] 13 000 00 1 0 0 0 0 0 0 00 [ 31.665126] 14 000 00 1 0 0 0 0 0 0 00 [ 31.665131] 15 000 00 1 0 0 0 0 0 0 00 [ 31.665137] 16 000 00 1 0 0 0 0 0 0 00 [ 31.665143] 17 000 00 1 0 0 0 0 0 0 00 [ 31.665146] IRQ to pin mappings: [ 31.665147] IRQ0 -> 0:2 [ 31.665149] IRQ1 -> 0:1 [ 31.665150] IRQ3 -> 0:3 [ 31.665152] IRQ4 -> 0:4 [ 31.665154] IRQ5 -> 0:5 [ 31.665155] IRQ6 -> 0:6 [ 31.665157] IRQ7 -> 0:7 [ 31.665158] IRQ8 -> 0:8 [ 31.665160] IRQ9 -> 0:9 [ 31.665162] IRQ10 -> 0:10 [ 31.665163] IRQ11 -> 0:11 [ 31.665165] IRQ12 -> 0:12 [ 31.665167] IRQ13 -> 0:13 [ 31.665168] IRQ14 -> 0:14 [ 31.665170] IRQ15 -> 0:15 [ 31.665173] .................................... done. [ 31.696336] NET: Registered protocol family 8 [ 31.696396] NET: Registered protocol family 20 [ 31.696486] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 31.696724] hpet0: 3 32-bit timers, 25000000 Hz [ 31.697819] AppArmor: AppArmor Filesystem Enabled [ 31.701082] Time: hpet clocksource has been installed. [ 31.701145] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 31.701264] Could not switch to high resolution mode on CPU 0 [ 31.704317] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 31.706911] Could not switch to high resolution mode on CPU 1 [ 31.712336] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 31.712412] system 00:03: ioport range 0x1000-0x107f has been reserved [ 31.712475] system 00:03: ioport range 0x1080-0x10ff has been reserved [ 31.712538] system 00:03: ioport range 0x1400-0x147f has been reserved [ 31.712601] system 00:03: ioport range 0x1480-0x14ff has been reserved [ 31.712664] system 00:03: ioport range 0x1800-0x187f has been reserved [ 31.712727] system 00:03: ioport range 0x1880-0x18ff has been reserved [ 31.712792] system 00:04: ioport range 0x360-0x361 has been reserved [ 31.712854] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 31.712922] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved [ 31.712996] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 31.713070] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 31.713143] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved [ 31.713209] system 00:0b: iomem range 0x0-0x0 could not be reserved [ 31.713271] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved [ 31.743673] PCI: Bridge: 0000:00:08.0 [ 31.743732] IO window: disabled. [ 31.743794] MEM window: f6100000-f61fffff [ 31.743854] PREFETCH window: disabled. [ 31.743914] PCI: Bridge: 0000:00:0c.0 [ 31.743973] IO window: 4000-4fff [ 31.744032] MEM window: f2000000-f3ffffff [ 31.744091] PREFETCH window: f0000000-f1ffffff [ 31.744152] PCI: Bridge: 0000:00:0d.0 [ 31.744210] IO window: disabled. [ 31.744275] MEM window: f6000000-f60fffff [ 31.744334] PREFETCH window: disabled. [ 31.744401] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 31.744410] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 31.744416] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 31.744428] NET: Registered protocol family 2 [ 31.784229] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 31.784530] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 31.785241] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 31.785629] TCP: Hash tables configured (established 131072 bind 65536) [ 31.785693] TCP reno registered [ 31.800266] checking if image is initramfs... it is [ 32.387778] Freeing initrd memory: 7319k freed [ 32.387930] Simple Boot Flag at 0x36 set to 0x1 [ 32.388570] audit: initializing netlink socket (disabled) [ 32.388639] audit(1217844917.340:1): initialized [ 32.388859] highmem bounce pool size: 64 pages [ 32.390663] VFS: Disk quotas dquot_6.5.1 [ 32.390791] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 32.390961] io scheduler noop registered [ 32.391020] io scheduler anticipatory registered [ 32.391090] io scheduler deadline registered [ 32.391157] io scheduler cfq registered (default) [ 32.391245] pci 0000:00:00.0: Enabling HT MSI Mapping [ 32.391436] pci 0000:00:07.0: Enabling HT MSI Mapping [ 32.391508] pci 0000:00:08.0: Enabling HT MSI Mapping [ 32.391581] pci 0000:00:09.0: Enabling HT MSI Mapping [ 32.391654] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 32.391726] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 32.391799] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 32.391871] Boot video device is 0000:00:12.0 [ 32.391974] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 32.391996] assign_interrupt_mode Found MSI capability [ 32.392074] Allocate Port Service[0000:00:0c.0:pcie00] [ 32.392133] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 32.392154] assign_interrupt_mode Found MSI capability [ 32.392229] Allocate Port Service[0000:00:0d.0:pcie00] [ 32.392430] isapnp: Scanning for PnP cards... [ 32.744395] isapnp: No Plug & Play device found [ 32.770068] Real Time Clock Driver v1.12ac [ 32.770298] hpet_resources: 0xfed00000 is busy [ 32.770341] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 32.771795] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 32.771924] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 32.772080] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 32.799602] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 32.799666] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 32.814297] mice: PS/2 mouse device common for all mice [ 32.814465] EISA: Probing bus 0 at eisa.0 [ 32.814528] Cannot allocate resource for EISA slot 1 [ 32.814591] Cannot allocate resource for EISA slot 3 [ 32.814652] Cannot allocate resource for EISA slot 4 [ 32.814723] EISA: Detected 0 cards. [ 32.814782] cpuidle: using governor ladder [ 32.814842] cpuidle: using governor menu [ 32.814971] NET: Registered protocol family 1 [ 32.815051] Using IPI No-Shortcut mode [ 32.815135] registered taskstats version 1 [ 32.815300] Magic number: 4:91:274 [ 32.815378] hash matches device ttyy2 [ 32.815515] hash matches device tty11 [ 32.815602] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 32.815664] EDD information not available. [ 32.815917] Freeing unused kernel memory: 368k freed [ 32.832444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 33.034327] fuse init (API version 7.9) [ 33.056354] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 33.056598] ACPI: Processor [CPU0] (supports 8 throttling states) [ 33.056116] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 33.056361] ACPI: Processor [CPU1] (supports 8 throttling states) [ 33.057692] ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126] [ 33.500573] usbcore: registered new interface driver usbfs [ 33.500656] usbcore: registered new interface driver hub [ 33.500739] usbcore: registered new device driver usb [ 33.501716] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 33.502045] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 33.502110] IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 16 Mode:1 Active:1) [ 33.502117] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 16 [ 33.502286] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 33.502289] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 33.502589] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 33.502677] ohci_hcd 0000:00:02.0: irq 16, io mem 0xf6486000 [ 33.541274] SCSI subsystem initialized [ 33.558200] libata version 3.00 loaded. [ 33.558957] usb usb1: configuration #1 chosen from 1 choice [ 33.559044] hub 1-0:1.0: USB hub found [ 33.559110] hub 1-0:1.0: 7 ports detected [ 33.665055] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 33.665122] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z018] -> GSI 18 (level, low) -> IRQ 16 [ 33.665294] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 33.665297] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 33.665378] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 33.665460] ohci_hcd 0000:00:04.0: irq 16, io mem 0xf6487000 [ 33.726625] usb usb2: configuration #1 chosen from 1 choice [ 33.726710] hub 2-0:1.0: USB hub found [ 33.726774] hub 2-0:1.0: 2 ports detected [ 33.829565] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 33.829633] IOAPIC[0]: Set PCI routing entry (2-22 -> 0xc1 -> IRQ 17 Mode:1 Active:1) [ 33.829640] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 17 [ 33.829810] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 33.829813] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 33.829896] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 33.829995] ehci_hcd 0000:00:02.1: debug port 1 [ 33.830057] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 33.830067] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf6489000 [ 33.841032] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.841186] usb usb3: configuration #1 chosen from 1 choice [ 33.841268] hub 3-0:1.0: USB hub found [ 33.841331] hub 3-0:1.0: 7 ports detected [ 33.945249] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 33.945317] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z019] -> GSI 22 (level, low) -> IRQ 17 [ 33.945488] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 33.945491] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 33.945572] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 33.945668] ehci_hcd 0000:00:04.1: debug port 1 [ 33.945730] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 33.945736] ehci_hcd 0000:00:04.1: irq 17, io mem 0xf6489400 [ 33.956845] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.957023] usb usb4: configuration #1 chosen from 1 choice [ 33.957104] hub 4-0:1.0: USB hub found [ 33.957167] hub 4-0:1.0: 2 ports detected [ 34.060791] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 34.061177] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 34.061241] IOAPIC[0]: Set PCI routing entry (2-20 -> 0xc9 -> IRQ 18 Mode:1 Active:1) [ 34.061248] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 18 [ 34.061413] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 34.580090] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:1e:68:09:25:f6 [ 34.580170] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 34.580815] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 34.580882] IOAPIC[0]: Set PCI routing entry (2-5 -> 0x51 -> IRQ 5 Mode:1 Active:1) [ 34.580891] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 34.590904] pata_amd 0000:00:06.0: version 0.3.10 [ 34.590952] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 34.591862] scsi0 : pata_amd [ 34.592220] scsi1 : pata_amd [ 34.592543] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 34.592607] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 34.632717] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 34.726653] usb 4-2: new high speed USB device using ehci_hcd and address 3 [ 34.890138] usb 4-2: configuration #1 chosen from 1 choice [ 34.938523] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2 [ 35.134062] ata1.00: configured for MWDMA2 [ 35.134151] ata2: port disabled. ignoring. [ 35.136393] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632N 0503 PQ: 0 ANSI: 5 [ 35.138348] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 35.138415] IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd1 -> IRQ 19 Mode:1 Active:1) [ 35.138422] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 19 [ 35.138614] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 35.138623] ACPI: PCI interrupt for device 0000:00:09.0 disabled [ 35.145626] ahci 0000:00:09.0: version 3.0 [ 35.145638] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 19 [ 35.154336] Driver 'sr' needs updating - please use bus_type methods [ 35.171582] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 35.171658] Uniform CD-ROM driver Revision: 3.20 [ 35.171758] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 35.176820] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 35.201723] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 35.435404] usb 2-1: configuration #1 chosen from 1 choice [ 35.916480] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00964cac00] [ 36.147951] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 36.148031] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part [ 36.148096] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 36.148369] scsi2 : ahci [ 36.148670] scsi3 : ahci [ 36.148855] scsi4 : ahci [ 36.149039] scsi5 : ahci [ 36.149164] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 221 [ 36.149239] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 221 [ 36.149312] ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 221 [ 36.149386] ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 221 [ 36.794731] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 36.795566] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100 [ 36.795630] ata3.00: 488397168 sectors, multi 16: LBA48 [ 36.796644] ata3.00: configured for UDMA/100 [ 37.122115] ata4: SATA link down (SStatus 0 SControl 300) [ 37.449502] ata5: SATA link down (SStatus 0 SControl 300) [ 37.776887] ata6: SATA link down (SStatus 0 SControl 300) [ 37.777034] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5 [ 37.777181] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 37.785883] Driver 'sd' needs updating - please use bus_type methods [ 37.786036] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 37.786109] sd 2:0:0:0: [sda] Write Protect is off [ 37.786169] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 37.786184] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.786297] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 37.786367] sd 2:0:0:0: [sda] Write Protect is off [ 37.786427] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 37.786440] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.786516] sda: sda1 sda2 sda3 < sda5 sda6 > [ 38.151646] sd 2:0:0:0: [sda] Attached SCSI disk [ 38.550428] Attempting manual resume [ 38.550489] swsusp: Resume From Partition 8:6 [ 38.550491] PM: Checking swsusp image. [ 38.550633] PM: Resume from disk failed. [ 38.575486] kjournald starting. Commit interval 5 seconds [ 38.575564] EXT3-fs: mounted filesystem with ordered data mode. [ 47.260157] input: Power Button (FF) as /devices/virtual/input/input2 [ 47.279069] ACPI: Power Button (FF) [PWRF] [ 47.279828] input: Sleep Button (CM) as /devices/virtual/input/input3 [ 47.314988] ACPI: Sleep Button (CM) [SLPB] [ 47.315126] input: Lid Switch as /devices/virtual/input/input4 [ 47.317047] ACPI: Lid Switch [LID] [ 47.317185] input: Power Button (CM) as /devices/virtual/input/input5 [ 47.350920] ACPI: Power Button (CM) [PWRB] [ 47.420077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 47.446880] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 47.484115] ACPI: AC Adapter [ACAD] (on-line) [ 47.518836] Linux agpgart interface v0.102 [ 47.533062] nvidia: module license 'NVIDIA' taints kernel. [ 47.793330] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 47.793399] IOAPIC[0]: Set PCI routing entry (2-16 -> 0xe1 -> IRQ 20 Mode:1 Active:1) [ 47.793406] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 16 (level, low) -> IRQ 20 [ 47.793578] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 47.794383] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05 Tue Jan 22 19:36:58 PST 2008 [ 48.046000] ACPI: Battery Slot [BAT0] (battery present) [ 48.046875] ACPI: WMI-Acer: Mapper loaded [ 48.288073] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 48.309133] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 48.377055] ricoh-mmc: Ricoh MMC Controller disabling driver [ 48.377120] ricoh-mmc: Copyright(c) Philip Langdale [ 48.377217] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12) [ 48.377296] ricoh-mmc: Controller is now disabled. [ 48.397012] sdhci: Secure Digital Host Controller Interface driver [ 48.397079] sdhci: Copyright(c) Pierre Ossman [ 48.397173] sdhci: SDHCI controller found at 0000:02:05.1 [1180:0822] (rev 22) [ 48.397550] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 48.397614] IOAPIC[0]: Set PCI routing entry (2-7 -> 0x61 -> IRQ 7 Mode:1 Active:1) [ 48.397623] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 48.397794] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 48.397908] mmc0: SDHCI at 0xf6100800 irq 7 DMA [ 48.780295] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 48.860854] wlan: 0.9.4 [ 48.909579] ath_pci: 0.9.4 [ 48.909987] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 48.910052] IOAPIC[0]: Set PCI routing entry (2-19 -> 0xe9 -> IRQ 21 Mode:1 Active:1) [ 48.910059] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 21 [ 48.910226] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 48.938021] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13) [ 48.938110] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 49.148054] Bluetooth: Core ver 2.11 [ 49.152895] NET: Registered protocol family 31 [ 49.152959] Bluetooth: HCI device and connection manager initialized [ 49.153022] Bluetooth: HCI socket layer initialized [ 49.320349] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 49.356526] Bluetooth: HCI USB driver ver 2.9 [ 49.358540] usbcore: registered new interface driver hci_usb [ 49.380151] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 49.380219] IOAPIC[0]: Set PCI routing entry (2-21 -> 0x32 -> IRQ 22 Mode:1 Active:1) [ 49.380227] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 22 [ 49.380406] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 49.406493] Linux video capture interface: v2.00 [ 49.456914] uvcvideo: Found UVC 1.00 device HP Webcam (0408:030c) [ 49.460677] usbcore: registered new interface driver uvcvideo [ 49.460743] USB Video Class driver (v0.1.0) [ 50.068969] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 50.146919] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 50.876352] lp: driver loaded but no devices found [ 51.011609] Adding 5887780k swap on /dev/sda6. Priority:-1 extents:1 across:5887780k [ 51.459270] EXT3 FS on sda5, internal journal [ 52.403875] ip_tables: (C) 2000-2006 Netfilter Core Team [ 54.673686] No dock devices found. [ 54.903893] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) [ 54.904608] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x11 [ 54.904613] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12 [ 54.904615] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13 [ 54.904618] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 56.111583] NET: Registered protocol family 10 [ 56.111795] lo: Disabled Privacy Extensions [ 56.410127] apm: BIOS not found. [ 56.625202] ppdev: user-space parallel port driver [ 56.776927] audit(1217862942.087:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5743 profile="/usr/sbin/cupsd" namespace="default" [ 57.426312] Clocksource tsc unstable (delta = -98399745 ns) [ 58.115665] eth0: no link during initialization. [ 58.116850] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 58.183622] Bluetooth: L2CAP ver 2.9 [ 58.183627] Bluetooth: L2CAP socket layer initialized [ 58.225949] Bluetooth: RFCOMM socket layer initialized [ 58.228209] Bluetooth: RFCOMM TTY layer initialized [ 58.228215] Bluetooth: RFCOMM ver 1.8 [ 58.974612] NVRM: API mismatch: the client has the version 169.12, but [ 58.974614] NVRM: this kernel module has the version 96.43.05. Please [ 58.974616] NVRM: make sure that this kernel module and all NVIDIA driver [ 58.974617] NVRM: components have the same version. [ 61.136191] NVRM: API mismatch: the client has the version 169.12, but [ 61.136193] NVRM: this kernel module has the version 96.43.05. Please [ 61.136194] NVRM: make sure that this kernel module and all NVIDIA driver [ 61.136196] NVRM: components have the same version. [ 63.298526] NVRM: API mismatch: the client has the version 169.12, but [ 63.298528] NVRM: this kernel module has the version 96.43.05. Please [ 63.298530] NVRM: make sure that this kernel module and all NVIDIA driver [ 63.298531] NVRM: components have the same version. [ 83.140932] CPU0 attaching NULL sched-domain. [ 83.140939] CPU1 attaching NULL sched-domain. [ 83.150378] CPU0 attaching sched-domain: [ 83.150385] domain 0: span 03 [ 83.150387] groups: 01 02 [ 83.150390] CPU1 attaching sched-domain: [ 83.150392] domain 0: span 03 [ 83.150394] groups: 02 01 [ 89.276357] usb 1-6: new full speed USB device using ohci_hcd and address 2 [ 89.367521] usb 1-6: configuration #1 chosen from 1 choice [ 89.478206] usbcore: registered new interface driver usbserial [ 89.478225] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 89.478263] usbcore: registered new interface driver usbserial_generic [ 89.478265] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 89.485129] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port) [ 89.485159] option 1-6:1.0: GSM modem (1-port) converter detected [ 89.485281] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0 [ 89.485290] option 1-6:1.1: GSM modem (1-port) converter detected [ 89.485364] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1 [ 89.485372] usbcore: registered new interface driver option [ 89.485375] /build/buildd/linux-2.6.24/drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 [ 143.903833] PPP generic driver version 2.4.2 [ 144.017916] PPP BSD Compression module registered [ 144.071186] PPP Deflate Compression module registered [ 181.504180] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)