[ 0.000000] Linux version 2.6.24-11-generic (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu1)) #1 SMP Fri Feb 29 22:08:31 UTC 2008 (Ubuntu 2.6.24-11.17-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680400 (usable) [ 0.000000] BIOS-e820: 000000007f680400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 521856) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521856 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521856 [ 0.000000] On node 0 totalpages: 521856 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290195 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FBB00 checksum 0 [ 0.000000] ACPI: RSDP 000FBB00, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 7F681E00, 0064 (r1 DELL M08 27D70717 ASL 61) [ 0.000000] ACPI: FACP 7F681C9C, 00F4 (r4 DELL M08 27D70717 ASL 61) [ 0.000000] ACPI: DSDT 7F682400, 613B (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7F690C00, 0040 [ 0.000000] ACPI: HPET 7F681F00, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC 7F682000, 0068 (r1 DELL M08 27D70717 ASL 47) [ 0.000000] ACPI: ASF! 7F681C00, 007E (r32 DELL M08 27D70717 ASL 61) [ 0.000000] ACPI: MCFG 7F681FC0, 003E (r16 DELL M08 27D70717 ASL 61) [ 0.000000] ACPI: SLIC 7F68209C, 0176 (r1 DELL M08 27D70717 ASL 61) [ 0.000000] ACPI: TCPA 7F682300, 0032 (r1 0 ASL 0) [ 0.000000] ACPI: SSDT 7F6806EF, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517779 [ 0.000000] Kernel command line: root=UUID=b6c863a3-f68c-4b7f-a7b7-07e19d671903 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1994.470 MHz processor. [ 6.465114] Console: colour VGA+ 80x25 [ 6.465117] console [tty0] enabled [ 6.465416] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 6.465702] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 6.544802] Memory: 2057544k/2087424k available (2164k kernel code, 28644k reserved, 1003k data, 364k init, 1169920k highmem) [ 6.544808] virtual kernel memory layout: [ 6.544809] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 6.544810] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 6.544811] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 6.544812] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 6.544813] .init : 0xc041d000 - 0xc0478000 ( 364 kB) [ 6.544813] .data : 0xc031d12d - 0xc0417dc4 (1003 kB) [ 6.544814] .text : 0xc0100000 - 0xc031d12d (2164 kB) [ 6.544817] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 6.544853] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 6.544983] hpet clockevent registered [ 6.624922] Calibrating delay using timer specific routine.. 3993.51 BogoMIPS (lpj=7987020) [ 6.624942] Security Framework initialized [ 6.624947] SELinux: Disabled at boot. [ 6.624960] AppArmor: AppArmor initialized [ 6.624963] Failure registering capabilities with primary security module. [ 6.624970] Mount-cache hash table entries: 512 [ 6.625083] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 [ 6.625090] monitor/mwait feature present. [ 6.625091] using mwait in idle threads. [ 6.625095] CPU: L1 I cache: 32K, L1 D cache: 32K [ 6.625097] CPU: L2 cache: 4096K [ 6.625099] CPU: Physical Processor ID: 0 [ 6.625100] CPU: Processor Core ID: 0 [ 6.625102] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001 [ 6.625110] Compat vDSO mapped to ffffe000. [ 6.625121] Checking 'hlt' instruction... OK. [ 6.641246] SMP alternatives: switching to UP code [ 6.642649] Early unpacking initramfs... done [ 6.928609] ACPI: Core revision 20070126 [ 6.928649] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 6.933292] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 6.933306] SMP alternatives: switching to SMP code [ 6.933886] Booting processor 1/1 eip 3000 [ 6.944293] Initializing CPU#1 [ 7.024579] Calibrating delay using timer specific routine.. 3988.81 BogoMIPS (lpj=7977628) [ 7.024586] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 [ 7.024591] monitor/mwait feature present. [ 7.024593] CPU: L1 I cache: 32K, L1 D cache: 32K [ 7.024595] CPU: L2 cache: 4096K [ 7.024596] CPU: Physical Processor ID: 0 [ 7.024597] CPU: Processor Core ID: 1 [ 7.024599] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001 [ 7.025261] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 7.025283] Total of 2 processors activated (7982.32 BogoMIPS). [ 7.025484] ENABLING IO-APIC IRQs [ 7.025678] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 7.172553] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 7.192548] Brought up 2 CPUs [ 7.192570] CPU0 attaching sched-domain: [ 7.192572] domain 0: span 03 [ 7.192573] groups: 01 02 [ 7.192576] CPU1 attaching sched-domain: [ 7.192577] domain 0: span 03 [ 7.192579] groups: 02 01 [ 7.192758] net_namespace: 64 bytes [ 7.192767] Booting paravirtualized kernel on bare hardware [ 7.193191] Time: 23:05:48 Date: 03/04/08 [ 7.193234] NET: Registered protocol family 16 [ 7.193384] EISA bus registered [ 7.193388] ACPI: bus type pci registered [ 7.204976] PCI: PCI BIOS revision 2.10 entry at 0xfa8a6, last bus=12 [ 7.204978] PCI: Using configuration type 1 [ 7.204979] Setting up standard PCI resources [ 7.212484] ACPI: EC: Look up EC in DSDT [ 7.270131] ACPI: SSDT 7F690C80, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 7.270292] ACPI: Interpreter enabled [ 7.270295] ACPI: (supports S0 S3 S4 S5) [ 7.270306] ACPI: Using IOAPIC for interrupt routing [ 7.314019] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 7.315009] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 7.315013] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 7.316134] PCI: Transparent bridge - 0000:00:1e.0 [ 7.316219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 7.316619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 7.316773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 7.316880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 7.316989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 7.333299] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 7.333404] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 7.333497] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled. [ 7.333600] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 7.333703] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 7.333807] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 7.333911] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 7.334006] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 7.334132] Linux Plug and Play Support v0.97 (c) Adam Belay [ 7.334157] pnp: PnP ACPI init [ 7.334164] ACPI: bus type pnp registered [ 7.392332] pnpacpi: exceeded the max number of mem resources: 12 [ 7.392488] pnp: PnP ACPI: found 14 devices [ 7.392490] ACPI: ACPI bus type pnp unregistered [ 7.392493] PnPBIOS: Disabled by ACPI PNP [ 7.392666] PCI: Using ACPI for IRQ routing [ 7.392668] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 7.472214] NET: Registered protocol family 8 [ 7.472215] NET: Registered protocol family 20 [ 7.472243] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 7.472246] hpet0: 3 64-bit timers, 14318180 Hz [ 7.473275] AppArmor: AppArmor Filesystem Enabled [ 7.476205] Time: tsc clocksource has been installed. [ 7.476212] Switched to high resolution mode on CPU 0 [ 7.476304] Switched to high resolution mode on CPU 1 [ 7.492175] system 00:05: ioport range 0xc80-0xcaf has been reserved [ 7.492178] system 00:05: ioport range 0xcc0-0xcff could not be reserved [ 7.492184] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 7.492190] system 00:0a: ioport range 0xcb0-0xcbb has been reserved [ 7.492192] system 00:0a: iomem range 0xfed40000-0xfed44fff could not be reserved [ 7.492197] system 00:0b: ioport range 0x900-0x97f has been reserved [ 7.492199] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 7.492201] system 00:0b: ioport range 0x1000-0x1005 has been reserved [ 7.492204] system 00:0b: ioport range 0x1008-0x100f has been reserved [ 7.492209] system 00:0c: ioport range 0xf400-0xf4fe has been reserved [ 7.492211] system 00:0c: ioport range 0x1006-0x1007 has been reserved [ 7.492213] system 00:0c: ioport range 0x100a-0x1059 could not be reserved [ 7.492215] system 00:0c: ioport range 0x1060-0x107f has been reserved [ 7.492218] system 00:0c: ioport range 0x1080-0x10bf has been reserved [ 7.492220] system 00:0c: ioport range 0x10c0-0x10df has been reserved [ 7.492222] system 00:0c: ioport range 0x1010-0x102f has been reserved [ 7.492224] system 00:0c: ioport range 0x809-0x809 has been reserved [ 7.492231] system 00:0d: iomem range 0x0-0x9efff could not be reserved [ 7.492233] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved [ 7.492235] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 7.492238] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 7.492240] system 00:0d: iomem range 0x100000-0x7f6803ff could not be reserved [ 7.492242] system 00:0d: iomem range 0x7f680400-0x7f6fffff could not be reserved [ 7.492245] system 00:0d: iomem range 0x7f700000-0x7f7fffff could not be reserved [ 7.492247] system 00:0d: iomem range 0x7f700000-0x7fefffff could not be reserved [ 7.492250] system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved [ 7.492252] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved [ 7.492254] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 7.492257] system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 7.522584] PCI: Bridge: 0000:00:1c.0 [ 7.522586] IO window: disabled. [ 7.522591] MEM window: disabled. [ 7.522596] PREFETCH window: disabled. [ 7.522601] PCI: Bridge: 0000:00:1c.1 [ 7.522602] IO window: disabled. [ 7.522608] MEM window: fe800000-fe8fffff [ 7.522612] PREFETCH window: disabled. [ 7.522618] PCI: Bridge: 0000:00:1c.5 [ 7.522619] IO window: disabled. [ 7.522625] MEM window: fe700000-fe7fffff [ 7.522629] PREFETCH window: disabled. [ 7.522642] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 7.522644] IO window: 00001400-000014ff [ 7.522649] IO window: 00001800-000018ff [ 7.522653] PREFETCH window: 88000000-8bffffff [ 7.522658] MEM window: 8c000000-8fffffff [ 7.522663] PCI: Bridge: 0000:00:1e.0 [ 7.522664] IO window: disabled. [ 7.522669] MEM window: fe600000-fe6fffff [ 7.522673] PREFETCH window: disabled. [ 7.522703] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.522710] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 7.522734] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 7.522740] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 7.522764] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 7.522769] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 7.522783] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 7.522801] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 7.522805] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 7.522819] NET: Registered protocol family 2 [ 7.560132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 7.560320] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 7.560675] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 7.560833] TCP: Hash tables configured (established 131072 bind 65536) [ 7.560835] TCP reno registered [ 7.572183] checking if image is initramfs... it is [ 8.135235] Freeing initrd memory: 7350k freed [ 8.135873] audit: initializing netlink socket (disabled) [ 8.135888] audit(1204671948.465:1): initialized [ 8.136074] highmem bounce pool size: 64 pages [ 8.137674] VFS: Disk quotas dquot_6.5.1 [ 8.137740] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.137847] io scheduler noop registered [ 8.137849] io scheduler anticipatory registered [ 8.137851] io scheduler deadline registered [ 8.137860] io scheduler cfq registered (default) [ 8.137870] Boot video device is 0000:00:02.0 [ 8.138087] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 8.138148] assign_interrupt_mode Found MSI capability [ 8.138200] Allocate Port Service[0000:00:1c.0:pcie00] [ 8.138227] Allocate Port Service[0000:00:1c.0:pcie02] [ 8.138325] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 8.138385] assign_interrupt_mode Found MSI capability [ 8.138433] Allocate Port Service[0000:00:1c.1:pcie00] [ 8.138457] Allocate Port Service[0000:00:1c.1:pcie02] [ 8.138554] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 8.138614] assign_interrupt_mode Found MSI capability [ 8.138662] Allocate Port Service[0000:00:1c.5:pcie00] [ 8.138687] Allocate Port Service[0000:00:1c.5:pcie02] [ 8.138905] isapnp: Scanning for PnP cards... [ 8.493031] isapnp: No Plug & Play device found [ 8.513233] Real Time Clock Driver v1.12ac [ 8.513359] hpet_resources: 0xfed00000 is busy [ 8.513416] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 8.513560] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.514113] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.514680] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 8.514735] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 8.514812] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 8.518237] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.518241] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.535313] mice: PS/2 mouse device common for all mice [ 8.535401] EISA: Probing bus 0 at eisa.0 [ 8.535403] EISA: Cannot allocate resource for mainboard [ 8.535405] Cannot allocate resource for EISA slot 1 [ 8.535435] EISA: Detected 0 cards. [ 8.535438] cpuidle: using governor ladder [ 8.535439] cpuidle: using governor menu [ 8.535507] NET: Registered protocol family 1 [ 8.535531] Using IPI No-Shortcut mode [ 8.535561] registered taskstats version 1 [ 8.535662] Magic number: 0:235:99 [ 8.535699] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 8.535700] EDD information not available. [ 8.535879] Freeing unused kernel memory: 364k freed [ 8.538117] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 9.698705] fuse init (API version 7.9) [ 9.709225] ACPI: SSDT 7F6810F6, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 9.709404] ACPI: SSDT 7F680BBB, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 9.709894] Monitor-Mwait will be used to enter C-1 state [ 9.709896] Monitor-Mwait will be used to enter C-2 state [ 9.709898] Monitor-Mwait will be used to enter C-3 state [ 9.709993] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 9.709997] ACPI: Processor [CPU0] (supports 8 throttling states) [ 9.710175] ACPI: SSDT 7F68137C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 9.710344] ACPI: SSDT 7F681071, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 9.711026] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 9.711031] ACPI: Processor [CPU1] (supports 8 throttling states) [ 9.715581] ACPI: Thermal Zone [THM] (48 C) [ 9.826561] usbcore: registered new interface driver usbfs [ 9.826580] usbcore: registered new interface driver hub [ 9.826612] usbcore: registered new device driver usb [ 9.827843] USB Universal Host Controller Interface driver v3.0 [ 9.827887] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 9.827897] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 9.827901] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 9.828064] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 9.828094] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20 [ 9.828195] usb usb1: configuration #1 chosen from 1 choice [ 9.828216] hub 1-0:1.0: USB hub found [ 9.828220] hub 1-0:1.0: 2 ports detected [ 9.930126] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 9.930136] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 9.930140] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 9.930159] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 9.930190] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00 [ 9.930284] usb usb2: configuration #1 chosen from 1 choice [ 9.930302] hub 2-0:1.0: USB hub found [ 9.930306] hub 2-0:1.0: 2 ports detected [ 10.034029] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 10.034040] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 10.034044] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 10.034063] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 10.034091] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80 [ 10.034187] usb usb3: configuration #1 chosen from 1 choice [ 10.034207] hub 3-0:1.0: USB hub found [ 10.034211] hub 3-0:1.0: 2 ports detected [ 10.089991] SCSI subsystem initialized [ 10.117897] libata version 3.00 loaded. [ 10.137944] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 10.137955] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 10.137959] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 10.137978] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 10.138006] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60 [ 10.138102] usb usb4: configuration #1 chosen from 1 choice [ 10.138123] hub 4-0:1.0: USB hub found [ 10.138128] hub 4-0:1.0: 2 ports detected [ 10.241857] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 10.241868] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 10.241873] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 10.241892] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 10.241923] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40 [ 10.242023] usb usb5: configuration #1 chosen from 1 choice [ 10.242043] hub 5-0:1.0: USB hub found [ 10.242047] hub 5-0:1.0: 2 ports detected [ 10.345809] tg3.c:v3.86 (November 9, 2007) [ 10.345839] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 10.345849] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 10.345887] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21 [ 10.345899] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 10.345903] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 10.345922] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 10.349846] ehci_hcd 0000:00:1a.7: debug port 1 [ 10.349852] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 10.349857] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400 [ 10.367435] eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:0d:79:58 [ 10.367441] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 10.367444] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 10.368010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 10.368090] usb usb6: configuration #1 chosen from 1 choice [ 10.368112] hub 6-0:1.0: USB hub found [ 10.368117] hub 6-0:1.0: 4 ports detected [ 10.469670] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 10.469681] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 10.469685] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 10.469706] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 10.473611] ehci_hcd 0000:00:1d.7: debug port 1 [ 10.473618] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 10.473622] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000 [ 10.585514] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 10.597502] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 10.597676] usb usb7: configuration #1 chosen from 1 choice [ 10.597711] hub 7-0:1.0: USB hub found [ 10.597718] hub 7-0:1.0: 6 ports detected [ 10.665436] Clocksource tsc unstable (delta = -1967379566 ns) [ 10.669469] Time: hpet clocksource has been installed. [ 10.670641] ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 18 [ 10.721338] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fe6ff000-fe6ff7ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 10.724459] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 10.724492] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 10.724504] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 10.724530] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 10.724550] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 10.724560] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 10.727802] ata_piix 0000:00:1f.1: version 2.12 [ 10.727813] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 10.727836] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 10.727906] scsi0 : ata_piix [ 10.727943] scsi1 : ata_piix [ 10.730118] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 10.730120] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 10.753539] ata1.00: ATAPI: Optiarc DVD+/-RW AD-5540A, 103C, max UDMA/33 [ 10.765761] ata1.00: configured for UDMA/33 [ 10.765854] ata2: port disabled. ignoring. [ 10.766763] scsi 0:0:0:0: CD-ROM Optiarc DVD+-RW AD-5540A 103C PQ: 0 ANSI: 5 [ 10.766843] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 10.769118] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 10.777004] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 10.777043] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 10.777526] scsi2 : ata_piix [ 10.777647] scsi3 : ata_piix [ 10.779712] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17 [ 10.779714] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17 [ 10.782763] usb 5-1: configuration #1 chosen from 1 choice [ 10.783983] hub 5-1:1.0: USB hub found [ 10.785911] hub 5-1:1.0: 4 ports detected [ 10.825872] ata3.00: ATA-7: ST980813AS, 3.ADB, max UDMA/133 [ 10.825878] ata3.00: 156301488 sectors, multi 8: LBA48 NCQ (not used) [ 10.838724] ata3.00: configured for UDMA/133 [ 10.894018] usb 5-1.2: new full speed USB device using uhci_hcd and address 4 [ 10.939314] usb 5-1.2: configuration #1 chosen from 1 choice [ 10.966060] ieee1394: Host added: ID:BUS[0-00:1023] GUID[434fc0001bb4dc38] [ 10.991182] scsi 2:0:0:0: Direct-Access ATA ST980813AS 3.AD PQ: 0 ANSI: 5 [ 10.999149] Driver 'sd' needs updating - please use bus_type methods [ 10.999204] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 10.999214] sd 2:0:0:0: [sda] Write Protect is off [ 10.999216] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 10.999230] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.999268] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 10.999277] sd 2:0:0:0: [sda] Write Protect is off [ 10.999279] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 10.999292] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.999295] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 11.006532] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 11.006536] Uniform CD-ROM driver Revision: 3.20 [ 11.006591] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 11.012810] sda1 sda2 sda3 sda4 < sda5 > [ 11.038266] sd 2:0:0:0: [sda] Attached SCSI disk [ 11.042061] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 11.042077] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 11.314027] Attempting manual resume [ 11.314030] swsusp: Resume From Partition 8:5 [ 11.314031] PM: Checking swsusp image. [ 11.314175] PM: Resume from disk failed. [ 11.351055] kjournald starting. Commit interval 5 seconds [ 11.351094] EXT3-fs: mounted filesystem with ordered data mode. [ 19.663748] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 19.688126] iTCO_vendor_support: vendor-support=0 [ 19.707505] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 19.751564] Linux agpgart interface v0.102 [ 19.890436] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.911247] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.948543] ACPI: AC Adapter [AC] (on-line) [ 19.995566] ACPI: Battery Slot [BAT0] (battery present) [ 19.995614] ACPI: Battery Slot [BAT1] (battery absent) [ 19.995831] input: Lid Switch as /devices/virtual/input/input3 [ 20.057321] ACPI: Lid Switch [LID] [ 20.057368] input: Power Button (CM) as /devices/virtual/input/input4 [ 20.103299] agpgart: Detected an Intel 965GM Chipset. [ 20.105020] agpgart: Detected 7676K stolen memory. [ 20.117901] agpgart: AGP aperture is 256M @ 0xe0000000 [ 20.123222] ACPI: Power Button (CM) [PBTN] [ 20.123273] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 20.187162] ACPI: Sleep Button (CM) [SBTN] [ 20.187245] ACPI: WMI-Acer: Mapper loaded [ 20.194295] input: PS/2 Mouse as /devices/virtual/input/input6 [ 20.267149] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01f9] [ 20.267177] Yenta O2: res at 0x94/0xD4: 00/ea [ 20.267179] Yenta O2: enabling read prefetch/write burst [ 20.278245] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 [ 20.342146] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 20.342186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 20.342219] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 20.395899] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 [ 20.395903] Socket status: 30000006 [ 20.395905] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 20.395910] pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff [ 20.404100] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input8 [ 20.458926] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 20.459057] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input9 [ 20.526857] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 20.790644] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 20.790647] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 20.790784] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 20.790799] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 20.790818] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 21.014500] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 21.014519] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 21.749624] iwl3945: Radio Frequency Kill Switch is On: [ 21.749627] Kill switch must be turned off for wireless networking to work. [ 21.751823] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 21.761880] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 21.781859] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 21.809398] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 21.829352] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 21.856692] cs: IO port probe 0x100-0x3af: clean. [ 21.858715] cs: IO port probe 0x3e0-0x4ff: clean. [ 21.859553] cs: IO port probe 0x820-0x8ff: clean. [ 21.860244] cs: IO port probe 0xc00-0xcf7: clean. [ 21.860902] cs: IO port probe 0xa00-0xaff: clean. [ 21.944946] lp: driver loaded but no devices found [ 22.106492] Adding 779112k swap on /dev/sda5. Priority:-1 extents:1 across:779112k [ 22.372745] EXT3 FS on sda3, internal journal [ 23.151332] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.673096] ACPI: ACPI Dock Station Driver [ 23.674278] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 23.674282] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 23.674301] ACPI: Error installing bay notify handler [ 23.674304] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 23.674315] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay [ 23.674319] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler [ 23.674334] ACPI: Error installing bay notify handler [ 23.674336] ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added [ 23.693755] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 28.074628] NET: Registered protocol family 10 [ 28.074820] lo: Disabled Privacy Extensions [ 28.075126] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.339992] ppdev: user-space parallel port driver [ 28.671087] audit(1204632374.568:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5262 profile="/usr/sbin/cupsd" namespace="default" [ 28.779024] apm: BIOS not found. [ 29.192537] [drm] Initialized drm 1.1.0 20060810 [ 29.202120] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 29.202126] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 29.202176] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 30.149086] Bluetooth: Core ver 2.11 [ 30.149163] NET: Registered protocol family 31 [ 30.149164] Bluetooth: HCI device and connection manager initialized [ 30.149167] Bluetooth: HCI socket layer initialized [ 30.281964] Bluetooth: L2CAP ver 2.9 [ 30.281968] Bluetooth: L2CAP socket layer initialized [ 30.333135] Bluetooth: RFCOMM socket layer initialized [ 30.333146] Bluetooth: RFCOMM TTY layer initialized [ 30.333148] Bluetooth: RFCOMM ver 1.8 [ 58.829140] CPU0 attaching NULL sched-domain. [ 58.829146] CPU1 attaching NULL sched-domain. [ 58.845992] CPU0 attaching sched-domain: [ 58.845997] domain 0: span 03 [ 58.845998] groups: 01 02 [ 58.846001] CPU1 attaching sched-domain: [ 58.846003] domain 0: span 03 [ 58.846004] groups: 02 01 [ 62.762245] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 62.854918] udev: renamed network interface wmaster0 to eth1