[   34.247276] tg3 0000:07:00.0 eth0: renamed from eno1
[   35.025824] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   35.027455] bonding: eth1 is being created...
[   35.085068] eth1: Setting xmit hash policy to encap3+4 (4)
[   35.085126] eth1: Setting MII monitoring interval to 100
[   35.088612] eth1: Setting LACP rate to fast (1)
[   35.089171] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   35.134768] eth1: Adding slave enp5s0f0
[   35.385182] eth1: Enslaving enp5s0f0 as a backup interface with a down link
[   35.438653] 8021q: 802.1Q VLAN Support v1.8
[   35.580894] igb 0000:05:00.0: changing MTU from 1500 to 9000
[   35.621122] 8021q: adding VLAN 0 to HW filter on device enp5s0f0
[   35.621138] 8021q: adding VLAN 0 to HW filter on device eth1
[   35.728247] eth1: Adding slave enp5s0f1
[   35.728274] igb 0000:05:00.1: changing MTU from 1500 to 9000
[   36.160938] 8021q: adding VLAN 0 to HW filter on device enp5s0f1
[   36.161226] eth1: Enslaving enp5s0f1 as a backup interface with a down link
[   36.177611] IPv6: ADDRCONF(NETDEV_UP): eth1.110: link is not ready
[   36.209744] eth1: Adding slave enp6s0f0
[   36.209780] igb 0000:06:00.0: changing MTU from 1500 to 9000
[   36.641168] 8021q: adding VLAN 0 to HW filter on device enp6s0f0
[   36.641442] eth1: Enslaving enp6s0f0 as a backup interface with a down link
[   36.649176] IPv6: ADDRCONF(NETDEV_UP): eth1.50: link is not ready
[   36.687359] eth1: Adding slave enp6s0f1
[   36.687386] igb 0000:06:00.1: changing MTU from 1500 to 9000
[   37.121010] 8021q: adding VLAN 0 to HW filter on device enp6s0f1
[   37.121287] eth1: Enslaving enp6s0f1 as a backup interface with a down link
[   37.230330] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   38.130593] igb 0000:05:00.0 enp5s0f0: igb: enp5s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   38.190060] eth1: link status definitely up for interface enp5s0f0, 1000 Mbps full duplex
[   38.190064] eth1: Warning: No 802.3ad response from the link partner for any adapters in the bond
[   38.190070] eth1: first active interface up!
[   38.190080] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   38.190708] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.50: link becomes ready
[   38.190746] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.110: link becomes ready
[   38.658603] igb 0000:05:00.1 enp5s0f1: igb: enp5s0f1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   38.690076] eth1: link status definitely up for interface enp5s0f1, 1000 Mbps full duplex
[   39.122613] igb 0000:06:00.0 enp6s0f0: igb: enp6s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   39.190136] eth1: link status definitely up for interface enp6s0f0, 1000 Mbps full duplex
[   39.595439] tg3 0000:07:00.0 eth0: Link is up at 1000 Mbps, full duplex
[   39.595444] tg3 0000:07:00.0 eth0: Flow control is on for TX and on for RX
[   39.595454] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   39.626669] igb 0000:06:00.1 enp6s0f1: igb: enp6s0f1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   39.690148] eth1: link status definitely up for interface enp6s0f1, 1000 Mbps full duplex