w w w . d e l l . c o m PowerEdge R210 II Testing Memory... BIOS Revision 2.4.3 Copyright (C) 2000-2012 Broadcom Corporation Copyright (C) 1997-2000 Intel Corporation CLIENT MAC ADDR: D4 AE 52 CB C3 B8 GUID: 44454C4C 5700 1044 8033 B7C04F385931 CLIENT IP: 10.245.40.176 MASK: 255.255.192.0 DHCP IP: 10.245.0.10 GATEWAY IP: 10.245.0.1 !PXE entry point found (we hope) at 98B1:00D6 via plan A UNDI code segment at 98B1 len 4D60 UNDI data segment at 92EA len 5C70 Getting cached packet 01 02 03 My IP address seems to be 0AF528B0 10.245.40.176 ip=10.245.40.176:10.245.0.10:10.245.0.1:255.255.192.0 BOOTIF=01-d4-ae-52-cb-c3-b8 SYSUUID=44454c4c-5700-1044-8033-b7c04f385931 TFTP prefix: Trying to load: pxelinux.cfg/default ok Booting under MAAS direction... nomodeset netcfg/choose_interface=auto text priority=critical auto url=http://10 .245.0.10/MAAS/metadata/latest/enlist-preseed/?op=get_enlist_preseed locale=en_U S hostname=maas-enlist domain=oil log_host=10.245.0.10 log_port=514 -- console=t tyS1,115200 Loading ubuntu/amd64/generic/trusty/release/boot-kernel........ Loading ubuntu/amd64/generic/trusty/release/boot-initrd......................... .ready. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-35-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 (Ubuntu 3.13.0-35.62-generic 3.13.11.6) [ 0.000000] Command line: nomodeset netcfg/choose_interface=auto text priority=critical auto url=http://10.245.0.10/MAAS/metadata/latest/enlist-preseed/?op=get_enlist_preseed locale=en_US hostname=maas-enlist domain=oil log_host=10.245.0.10 log_port=514 -- console=ttyS1,115200 initrd=ubuntu/amd64/generic/trusty/release/boot-initrd BOOT_IMAGE=ubuntu/amd64/generic/trusty/release/boot-kernel BOOTIF=01-d4-ae-52-cb-c3-b8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdfaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdfb0000-0x00000000bf3affff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf3b0000-0x00000000bf5d7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf5d8000-0x00000000bf5d9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf5da000-0x00000000bf5e7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf5e8000-0x00000000bf5ebfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf5ec000-0x00000000bf5effff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf5f0000-0x00000000bf600fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf601000-0x00000000bf63efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf63f000-0x00000000bf6befff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf7f0000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x83fe00000-0x83fffffff] [ 0.000000] init_memory_mapping: [mem 0x83c000000-0x83fdfffff] [ 0.000000] init_memory_mapping: [mem 0x800000000-0x83bffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbdfaffff] [ 0.000000] init_memory_mapping: [mem 0xbf3b0000-0xbf5d7fff] [ 0.000000] init_memory_mapping: [mem 0xbf5da000-0xbf5e7fff] [ 0.000000] init_memory_mapping: [mem 0xbf5ec000-0xbf5effff] [ 0.000000] init_memory_mapping: [mem 0xbf601000-0xbf63efff] [ 0.000000] init_memory_mapping: [mem 0xbf7f0000-0xbf7fffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff] [ 0.000000] RAMDISK: [mem 0x7e842000-0x7fffefff] [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000bf7ef170 0000AC (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: FACP 00000000bf7eb000 0000F4 (v04 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: DSDT 00000000bf7e1000 0068FE (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.000000] ACPI: FACS 00000000bf7b8000 000040 [ 0.000000] ACPI: SPMI 00000000bf7ee000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: DMAR 00000000bf7ed000 000078 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: ASF! 00000000bf7ec000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: HPET 00000000bf7ea000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: APIC 00000000bf7e9000 000092 (v02 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: MCFG 00000000bf7e8000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: BOOT 00000000bf7de000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: SSDT 00000000bf7dd000 0002F6 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.000000] ACPI: ASPT 00000000bf7d9000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: SSDT 00000000bf7d8000 0009AA (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.000000] ACPI: SSDT 00000000bf7d7000 000A92 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.000000] ACPI: SPCR 00000000bf7da000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.000000] ACPI: HEST 00000000bf7d6000 0000A8 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.000000] ACPI: ERST 00000000bf7d5000 000230 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.000000] ACPI: BERT 00000000bf7d4000 000030 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.000000] ACPI: EINJ 00000000bf7d3000 000130 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x83fffffff] [ 0.000000] NODE_DATA [mem 0x83ffdb000-0x83ffdffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x83fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xbdfaffff] [ 0.000000] node 0: [mem 0xbf3b0000-0xbf5d7fff] [ 0.000000] node 0: [mem 0xbf5da000-0xbf5e7fff] [ 0.000000] node 0: [mem 0xbf5ec000-0xbf5effff] [ 0.000000] node 0: [mem 0xbf601000-0xbf63efff] [ 0.000000] node 0: [mem 0xbf7f0000-0xbf7fffff] [ 0.000000] node 0: [mem 0x100000000-0x83fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdfb0000-0xbf3affff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf5d8000-0xbf5d9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf5e8000-0xbf5ebfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf5f0000-0xbf600fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf63f000-0xbf6befff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf6bf000-0xbf7befff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7bf000-0xbf7effff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88083fc00000 s86336 r8192 d24256 u262144 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8249910 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: nomodeset netcfg/choose_interface=auto text priority=critical auto url=http://10.245.0.10/MAAS/metadata/latest/enlist-preseed/?op=get_enlist_preseed locale=en_US hostname=maas-enlist domain=oil log_host=10.245.0.10 log_port=514 -- console=ttyS1,115200 initrd=ubuntu/amd64/generic/trusty/release/boot-initrd BOOT_IMAGE=ubuntu/amd64/generic/trusty/release/boot-kernel BOOTIF=01-d4-ae-52-cb-c3-b8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 32891184K/33523536K available (7372K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 632352K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS1] enabled [ 0.000000] allocated 134217728 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3092.922 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.84 BogoMIPS (lpj=12371688) [ 0.010709] pid_max: default: 32768 minimum: 301 [ 0.015343] Security Framework initialized [ 0.019457] AppArmor: AppArmor initialized [ 0.023559] Yama: becoming mindful. [ 0.028735] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.041248] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.050734] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.057646] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.065204] Initializing cgroup subsys memory [ 0.069572] Initializing cgroup subsys devices [ 0.074021] Initializing cgroup subsys freezer [ 0.078465] Initializing cgroup subsys blkio [ 0.082737] Initializing cgroup subsys perf_event [ 0.087443] Initializing cgroup subsys hugetlb [ 0.091903] CPU: Physical Processor ID: 0 [ 0.095915] CPU: Processor Core ID: 0 [ 0.099577] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.099577] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.112605] mce: CPU supports 9 MCE banks [ 0.116632] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.116632] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.116632] tlb_flushall_shift: 5 [ 0.131141] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000) [ 0.140226] ACPI: Core revision 20131115 [ 0.147173] ACPI: All ACPI Tables successfully acquired [ 0.163780] ftrace: allocating 28537 entries in 112 pages [ 0.180339] dmar: Host address width 36 [ 0.184184] dmar: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.189506] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da [ 0.197594] dmar: RMRR base: 0x00000000000000 end: 0x00000000000fff [ 0.203926] IOAPIC id 0 under DRHD base 0xfed90000 IOMMU 0 [ 0.209491] HPET id 0 under DRHD base 0xfed90000 [ 0.214176] Enabled IRQ remapping in x2apic mode [ 0.218790] Enabling x2apic [ 0.221587] Enabled x2apic [ 0.224300] Switched APIC routing to cluster x2apic. [ 0.229671] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.275342] smpboot: CPU0: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (fam: 06, model: 2a, stepping: 07) [ 0.284452] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.294976] ... version: 3 [ 0.298979] ... bit width: 48 [ 0.303069] ... generic registers: 8 [ 0.307081] ... value mask: 0000ffffffffffff [ 0.312385] ... max period: 0000ffffffffffff [ 0.317695] ... fixed-purpose events: 3 [ 0.321708] ... event mask: 00000007000000ff [ 0.328238] x86: Booting SMP configuration: [ 0.332419] .... node #0, CPUs: #1[ 0.349310] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. #2 #3 [ 0.384092] x86: Booted up 1 node, 4 CPUs [ 0.388294] smpboot: Total of 4 processors activated (24743.37 BogoMIPS) [ 0.398094] devtmpfs: initialized [ 0.405470] EVM: security.selinux [ 0.408785] EVM: security.SMACK64 [ 0.412104] EVM: security.ima [ 0.415073] EVM: security.capability [ 0.418699] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff] (1048576 bytes) [ 0.427305] pinctrl core: initialized pinctrl subsystem [ 0.432571] regulator-dummy: no parameters [ 0.436695] RTC time: 17:51:08, date: 06/09/15 [ 0.441164] NET: Registered protocol family 16 [ 0.445710] cpuidle: using governor ladder [ 0.449802] cpuidle: using governor menu [ 0.453767] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.461327] ACPI: bus type PCI registered [ 0.465339] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.471821] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.481119] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.508626] PCI: Using configuration type 1 for base access [ 0.515039] bio: create slab at 0 [ 0.519150] ACPI: Added _OSI(Module Device) [ 0.523330] ACPI: Added _OSI(Processor Device) [ 0.527776] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.532478] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539492] ACPI: Executed 1 blocks of module-level executable AML code [ 0.547930] ACPI: SSDT 00000000bf64d018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20080729) [ 0.556515] ACPI: Dynamic OEM Table Load: [ 0.560568] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20080729) [ 0.572975] ACPI: SSDT 00000000bf64ea98 000303 (v01 PmRef ApIst 00003000 INTL 20080729) [ 0.581584] ACPI: Dynamic OEM Table Load: [ 0.585634] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20080729) [ 0.596852] ACPI: SSDT 00000000bf64cd98 000119 (v01 PmRef ApCst 00003000 INTL 20080729) [ 0.605431] ACPI: Dynamic OEM Table Load: [ 0.609472] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20080729) [ 0.621147] ACPI: Interpreter enabled [ 0.624813] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.634063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.643325] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580) [ 0.652573] ACPI: (supports S0 S4 S5) [ 0.656234] ACPI: Using IOAPIC for interrupt routing [ 0.661234] HEST: Table parsing has been initialized. [ 0.666288] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.675506] ACPI: No dock devices found. [ 0.682694] ACPI: Power Resource [FN00] (off) [ 0.687102] ACPI: Power Resource [FN01] (off) [ 0.691510] ACPI: Power Resource [FN02] (off) [ 0.695918] ACPI: Power Resource [FN03] (off) [ 0.700330] ACPI: Power Resource [FN04] (off) [ 0.705117] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.711291] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.719829] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.728309] PCI host bridge to bus 0000:00 [ 0.732404] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.737888] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.744058] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.750234] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.757098] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff] [ 0.764092] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.771730] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.777516] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.785122] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.790870] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.797045] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.810715] pci 0000:00:01.0: PCI bridge to [bus 01-04] [ 0.816203] pci 0000:01:00.0: PCI bridge to [bus 02-04] [ 0.829442] pci 0000:02:02.0: PCI bridge to [bus 03] [ 0.842420] pci 0000:02:04.0: PCI bridge to [bus 04] [ 0.847675] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.861350] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 0.866498] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.873326] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.880915] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.888209] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.895495] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.902782] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 *6 10 11 12 14 15) [ 0.910067] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 *14 15) [ 0.917347] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 *6 10 11 12 14 15) [ 0.924641] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.933082] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 *15) [ 0.940494] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.945422] vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none [ 0.953505] vgaarb: loaded [ 0.956214] vgaarb: bridge control possible 0000:06:03.0 [ 0.961625] SCSI subsystem initialized [ 0.965422] ACPI: bus type USB registered [ 0.969440] usbcore: registered new interface driver usbfs [ 0.974929] usbcore: registered new interface driver hub [ 0.980246] usbcore: registered new device driver usb [ 0.985365] PCI: Using ACPI for IRQ routing [ 0.995596] NetLabel: Initializing [ 0.998993] NetLabel: domain hash size = 128 [ 1.003352] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.008323] NetLabel: unlabeled traffic allowed by default [ 1.013952] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.020290] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.028143] Switched to clocksource hpet [ 1.035295] AppArmor: AppArmor Filesystem Enabled [ 1.040026] pnp: PnP ACPI init [ 1.043088] ACPI: bus type PNP registered [ 1.047357] system 00:05: [io 0x0680-0x069f] has been reserved [ 1.053272] system 00:05: [io 0x1000-0x100f] has been reserved [ 1.059188] system 00:05: [io 0x1010-0x1013] has been reserved [ 1.065106] system 00:05: [io 0xffff] has been reserved [ 1.070418] system 00:05: [io 0x0400-0x0453] could not be reserved [ 1.076681] system 00:05: [io 0x0458-0x047f] has been reserved [ 1.082599] system 00:05: [io 0x0500-0x057f] has been reserved [ 1.088516] system 00:05: [io 0x164e-0x164f] has been reserved [ 1.094481] system 00:07: [io 0x0454-0x0457] has been reserved [ 1.100710] system 00:0a: [mem 0xfed90000-0xfed91fff] could not be reserved [ 1.107786] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.114401] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.121008] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.127619] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.134230] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 1.140842] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.147454] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.154411] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved [ 1.161369] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.168325] system 00:0b: [mem 0xc6a00000-0xc6a00fff] has been reserved [ 1.175065] pnp: PnP ACPI: found 12 devices [ 1.179251] ACPI: bus type PNP unregistered [ 1.189340] pci 0000:03:00.0: no compatible bridge window for [mem 0xffc00000-0xffffffff pref] [ 1.197941] pci 0000:03:00.1: no compatible bridge window for [mem 0xffc00000-0xffffffff pref] [ 1.206544] pci 0000:04:00.0: no compatible bridge window for [mem 0xffc00000-0xffffffff pref] [ 1.215148] pci 0000:04:00.1: no compatible bridge window for [mem 0xffc00000-0xffffffff pref] [ 1.223754] pci 0000:06:03.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 1.232397] pci 0000:00:01.0: BAR 15: assigned [mem 0xc6c00000-0xc7bfffff pref] [ 1.239704] pci 0000:01:00.0: BAR 15: assigned [mem 0xc6c00000-0xc7bfffff pref] [ 1.247008] pci 0000:02:02.0: BAR 15: assigned [mem 0xc6c00000-0xc73fffff pref] [ 1.254311] pci 0000:02:04.0: BAR 15: assigned [mem 0xc7400000-0xc7bfffff pref] [ 1.261766] pci 0000:03:00.0: BAR 6: assigned [mem 0xc6c00000-0xc6ffffff pref] [ 1.268983] pci 0000:03:00.1: BAR 6: assigned [mem 0xc7000000-0xc73fffff pref] [ 1.276214] pci 0000:03:00.0: BAR 7: assigned [mem 0xc6848000-0xc6867fff 64bit] [ 1.283540] pci 0000:03:00.0: BAR 10: assigned [mem 0xc6868000-0xc6887fff 64bit] [ 1.290950] pci 0000:03:00.1: BAR 7: assigned [mem 0xc6888000-0xc68a7fff 64bit] [ 1.298271] pci 0000:03:00.1: BAR 10: assigned [mem 0xc68a8000-0xc68c7fff 64bit] [ 1.305665] pci 0000:02:02.0: PCI bridge to [bus 03] [ 1.310632] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff] [ 1.316725] pci 0000:02:02.0: bridge window [mem 0xc6000000-0xc68fffff] [ 1.323508] pci 0000:02:02.0: bridge window [mem 0xc6c00000-0xc73fffff pref] [ 1.330875] pci 0000:04:00.0: BAR 6: assigned [mem 0xc7400000-0xc77fffff pref] [ 1.338088] pci 0000:04:00.1: BAR 6: assigned [mem 0xc7800000-0xc7bfffff pref] [ 1.345320] pci 0000:04:00.0: BAR 7: assigned [mem 0xc5c48000-0xc5c67fff 64bit] [ 1.352641] pci 0000:04:00.0: BAR 10: assigned [mem 0xc5c68000-0xc5c87fff 64bit] [ 1.360049] pci 0000:04:00.1: BAR 7: assigned [mem 0xc5c88000-0xc5ca7fff 64bit] [ 1.367371] pci 0000:04:00.1: BAR 10: assigned [mem 0xc5ca8000-0xc5cc7fff 64bit] [ 1.374764] pci 0000:02:04.0: PCI bridge to [bus 04] [ 1.379733] pci 0000:02:04.0: bridge window [io 0x2000-0x2fff] [ 1.385823] pci 0000:02:04.0: bridge window [mem 0xc5400000-0xc5cfffff] [ 1.392609] pci 0000:02:04.0: bridge window [mem 0xc7400000-0xc7bfffff pref] [ 1.399828] pci 0000:01:00.0: PCI bridge to [bus 02-04] [ 1.405048] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff] [ 1.411141] pci 0000:01:00.0: bridge window [mem 0xc5400000-0xc68fffff] [ 1.417924] pci 0000:01:00.0: bridge window [mem 0xc6c00000-0xc7bfffff pref] [ 1.425145] pci 0000:00:01.0: PCI bridge to [bus 01-04] [ 1.430365] pci 0000:00:01.0: bridge window [io 0x2000-0x3fff] [ 1.436456] pci 0000:00:01.0: bridge window [mem 0xc5400000-0xc68fffff] [ 1.443242] pci 0000:00:01.0: bridge window [mem 0xc6c00000-0xc7bfffff pref] [ 1.450458] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.455425] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff] [ 1.462215] pci 0000:06:03.0: BAR 6: assigned [mem 0xc5010000-0xc501ffff pref] [ 1.469433] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 1.474403] pci 0000:00:1e.0: bridge window [mem 0xc4800000-0xc50fffff] [ 1.481186] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xc47fffff 64bit pref] [ 1.488974] NET: Registered protocol family 2 [ 1.493520] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.501252] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.508070] TCP: Hash tables configured (established 262144 bind 65536) [ 1.514704] TCP: reno registered [ 1.517969] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 1.524241] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 1.530962] NET: Registered protocol family 1 [ 1.564199] Trying to unpack rootfs image as initramfs... [ 1.874197] Freeing initrd memory: 24308K (ffff88007e842000 - ffff88007ffff000) [ 1.881538] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.887978] software IO TLB [mem 0xb9fb0000-0xbdfb0000] (64MB) mapped at [ffff8800b9fb0000-ffff8800bdfaffff] [ 1.897851] Simple Boot Flag at 0x44 set to 0x1 [ 1.902532] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28 [ 1.908361] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28 [ 1.914188] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28 [ 1.920024] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28 [ 1.925882] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.934657] Scanning for low memory corruption every 60 seconds [ 1.940770] Initialise system trusted keyring [ 1.945167] audit: initializing netlink socket (disabled) [ 1.950572] type=2000 audit(1433872268.792:1): initialized [ 1.976399] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.983873] zbud: loaded [ 1.986517] VFS: Disk quotas dquot_6.5.2 [ 1.990466] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.997188] fuse init (API version 7.22) [ 2.001161] msgmni has been set to 32768 [ 2.005116] Key type big_key registered [ 2.009300] Key type asymmetric registered [ 2.013400] Asymmetric key parser 'x509' registered [ 2.018296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.025710] io scheduler noop registered [ 2.029636] io scheduler deadline registered (default) [ 2.034790] io scheduler cfq registered [ 2.039111] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 2.046065] pcieport 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.053020] pcieport 0000:02:02.0: Signaling PME through PCIe PME interrupt [ 2.059979] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.066505] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt [ 2.073028] pcieport 0000:02:04.0: Signaling PME through PCIe PME interrupt [ 2.079986] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 2.086510] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt [ 2.093046] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.100000] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 2.106522] pci 0000:05:00.1: Signaling PME through PCIe PME interrupt [ 2.113059] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.118636] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.125339] ipmi message handler version 39.2 [ 2.129743] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.137138] ACPI: Power Button [PWRF] [ 2.140840] ACPI: Fan [FAN0] (off) [ 2.144257] ACPI: Fan [FAN1] (off) [ 2.147675] ACPI: Fan [FAN2] (off) [ 2.151093] ACPI: Fan [FAN3] (off) [ 2.154514] ACPI: Fan [FAN4] (off) [ 2.158239] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.163902] ACPI: Thermal Zone [TZ01] (30 C) [ 2.168221] ERST: Error Record Serialization Table (ERST) support is initialized. [ 2.175710] pstore: Registered erst as persistent store backend [ 2.181752] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 2.189212] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.215961] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.243725] 00:09: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.252433] Linux agpgart interface v0.103 [ 2.257456] brd: module loaded [ 2.260990] loop: module loaded [ 2.264347] libphy: Fixed MDIO Bus: probed [ 2.268499] tun: Universal TUN/TAP device driver, 1.6 [ 2.273553] tun: (C) 1999-2004 Max Krasnyansky [ 2.279758] PPP generic driver version 2.4.2 [ 2.284058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.290591] ehci-pci: EHCI PCI platform driver [ 2.295115] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.300347] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.307750] ehci-pci 0000:00:1a.0: debug port 2 [ 2.316185] ehci-pci 0000:00:1a.0: irq 20, io mem 0xc6906000 [ 2.331868] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.337646] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.344437] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.351653] usb usb1: Product: EHCI Host Controller [ 2.356529] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd [ 2.362881] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.367602] hub 1-0:1.0: USB hub found [ 2.371365] hub 1-0:1.0: 2 ports detected [ 2.375518] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.380742] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.388139] ehci-pci 0000:00:1d.0: debug port 2 [ 2.396576] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc6905000 [ 2.411851] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.417619] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.424408] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.431627] usb usb2: Product: EHCI Host Controller [ 2.436504] usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd [ 2.442854] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.447568] hub 2-0:1.0: USB hub found [ 2.451327] hub 2-0:1.0: 2 ports detected [ 2.455396] ehci-platform: EHCI generic platform driver [ 2.460621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.466794] ohci-pci: OHCI PCI platform driver [ 2.471244] ohci-platform: OHCI generic platform driver [ 2.476486] uhci_hcd: USB Universal Host Controller Interface driver [ 2.482866] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.526006] i8042: No controller found [ 3.529778] tsc: Refined TSC clocksource calibration: 3092.974 MHz [ 3.529901] mousedev: PS/2 mouse device common for all mice [ 3.530113] rtc_cmos 00:06: RTC can wake from S4 [ 3.530329] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 3.530371] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.530413] device-mapper: uevent: version 1.0.3 [ 3.530529] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 3.530534] ledtrig-cpu: registered to indicate activity on CPUs [ 3.530601] TCP: cubic registered [ 3.530657] NET: Registered protocol family 10 [ 3.530772] NET: Registered protocol family 17 [ 3.530776] Key type dns_resolver registered [ 3.531057] Loading compiled-in X.509 certificates [ 3.531771] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0' [ 3.531779] registered taskstats version 1 [ 3.534043] Key type trusted registered [ 3.535419] Key type encrypted registered [ 3.536689] AppArmor: AppArmor sha1 policy hashing enabled [ 3.536690] IMA: No TPM chip found, activating TPM-bypass! [ 3.537001] regulator-dummy: disabling [ 3.537094] Magic number: 3:817:895 [ 3.639610] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.646372] rtc_cmos 00:06: setting system clock to 2015-06-09 17:51:11 UTC (1433872271) [ 3.655157] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.661160] EDD information not available. [ 3.666425] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000) [ 3.674255] Write protecting the kernel read-only data: 12288k [ 3.681697] Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000) [ 3.690675] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000) Loading, please wait... [ 3.708387] systemd-udevd[124]: starting version 204 [ 3.719858] IPMI System Interface driver. [ 3.723898] ipmi_si: probing via ACPI [ 3.727598] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.4 (Aug 05, 2013) [ 3.727641] wmi: Mapper loaded [ 3.727655] pps_core: LinuxPPS API ver. 1 registered [ 3.727656] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.727670] ipmi_si 00:00: [io 0x0ca8] regsize 1 spacing 4 irq 0 [ 3.727671] ipmi_si: Adding ACPI-specified kcs state machine [ 3.727681] ipmi_si: probing via SMBIOS [ 3.727682] ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0 [ 3.727682] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface [ 3.727683] ipmi_si: probing via SPMI [ 3.727684] ipmi_si: SPMI: io 0xca8 regsize 4 spacing 4 irq 0 [ 3.727685] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface [ 3.727685] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca8, slave address 0x0, irq 0 [ 3.771963] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.771964] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.772079] hub 1-1:1.0: USB hub found [ 3.772211] hub 1-1:1.0: 6 ports detected [ 3.830673] bnx2 0000:05:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem c0000000, IRQ 16, node addr d4:ae:52:cb:c3:b8 [ 3.844400] PTP clock support registered [ 3.844946] bnx2 0000:05:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem c2000000, IRQ 17, node addr d4:ae:52:cb:c3:b9 [ 3.855666] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.855708] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode [ 3.855710] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 3.885094] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.892541] scsi0 : ahci [ 3.895135] dca service started, version 1.12.1 [ 3.896108] scsi1 : ahci [ 3.896184] scsi2 : ahci [ 3.896236] scsi3 : ahci [ 3.897935] scsi4 : ahci [ 3.898696] scsi5 : ahci [ 3.898723] ata1: SATA max UDMA/133 abar m2048@0xc6904000 port 0xc6904100 irq 45 [ 3.898725] ata2: SATA max UDMA/133 abar m2048@0xc6904000 port 0xc6904180 irq 45 [ 3.898726] ata3: DUMMY [ 3.898726] ata4: DUMMY [ 3.898727] ata5: DUMMY [ 3.898728] ata6: SATA max UDMA/133 abar m2048@0xc6904000 port 0xc6904380 irq 45 [ 3.944603] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 3.951568] igb: Copyright (c) 2007-2013 Intel Corporation. [ 4.000360] ipmi_si 00:00: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) [ 4.008638] ipmi_si 00:00: IPMI kcs interface initialized [ 4.027911] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.034621] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.042226] hub 2-1:1.0: USB hub found [ 4.046164] hub 2-1:1.0: 6 ports detected [ 4.123638] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 4.147888] igb 0000:03:00.0: added PHC on eth2 [ 4.152420] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.159292] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:38:9e:b8 [ 4.166425] igb 0000:03:00.0: eth2: PBA No: Unknown [ 4.171299] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.221210] usb 1-1.1: New USB device found, idVendor=0624, idProduct=0248 [ 4.228089] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.235391] usb 1-1.1: Product: USB Composite Device-0 [ 4.240530] usb 1-1.1: Manufacturer: Avocent [ 4.244800] usb 1-1.1: SerialNumber: 20120430 [ 4.255491]ST1000NM0011, PA09, max UDMA/133 [ 4.268514] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.276124] ata1.00: configured for UDMA/133 [ 4.280481] hidraw: raw HID events driver (C) Jiri Kosina [ 4.280559] scsi 0:0:0:0: Direct-Access ATA ST1000NM0011 n/a PQ: 0 ANSI: 5 [ 4.280649] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.280651] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.280706] sd 0:0:0:0: [sda] Write Protect is off [ 4.280743] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.284935] sda: sda1 [ 4.285261] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.330824] usbcore: registered new interface driver usbhid [ 4.336403] usbhid: USB HID core driver [ 4.341440] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1 [ 4.352781] hid-generic 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1a.0-1.1/input0 [ 4.359586] usb 2-1.5: new high-speed USB device number 3 using ehci-pci [ 4.367805] igb 0000:03:00.1: added PHC on eth3 [ 4.367806] igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection [ 4.367807] igb 0000:03:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:38:9e:b9 [ 4.367809] igb 0000:03:00.1: eth3: PBA No: Unknown [ 4.367810] igb 0000:03:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.403622] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input2 [ 4.415039] hid-generic 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1a.0-1.1/input1 [ 4.451828] usb 2-1.5: New USB device found, idVendor=0424, idProduct=2514 [ 4.458705] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.466486] hub 2-1.5:1.0: USB hub found [ 4.470564] hub 2-1.5:1.0: 4 ports detected [ 4.559750] igb 0000:04:00.0: added PHC on eth4 [ 4.564296] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.571165] igb 0000:04:00.0: eth4: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:38:9e:bc [ 4.578294] igb 0000:04:00.0: eth4: PBA No: Unknown [ 4.583171] igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.599416] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.606439] ata2.00: ATA-8: ST1000NM0011, PA09, max UDMA/133 [ 4.612446] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.620134] ata2.00: configured for UDMA/133 [ 4.624566] scsi 1:0:0:0: Direct-Access ATA ST1000NM0011 n/a PQ: 0 ANSI: 5 [ 4.632772] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.632774] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.645741] Switched to clocksource tsc [ 4.645773] sd 1:0:0:0: [sdb] Write Protect is off [ 4.645791] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.663943] sdb: unknown partition table [ 4.668092] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.783697] igb 0000:04:00.1: added PHC on eth5 [ 4.788236] igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection [ 4.795105] igb 0000:04:00.1: eth5: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:38:9e:bd [ 4.802236] igb 0000:04:00.1: eth5: PBA No: Unknown [ 4.807113] igb 0000:04:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.963306] ata6: SATA link down (SStatus 0 SControl 300) Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. mount: can't read '/etc/fstab': No such file or directory Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory done. mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.21.1 (Ubuntu 1:1.21.0-1ubuntu1) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)