[   22.388164] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.391270] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.263901] ham0: no IPv6 routers present
[   37.506264] wlan0: authenticate with 1c:7e:e5:30:e3:dc
[   37.509661] wlan0: send auth to 1c:7e:e5:30:e3:dc (try 1/3)
[   37.511004] wlan0: authenticated
[   37.514581] wlan0: associate with 1c:7e:e5:30:e3:dc (try 1/3)
[   37.518550] wlan0: RX AssocResp from 1c:7e:e5:30:e3:dc (capab=0x431 status=0 aid=1)
[   37.518554] wlan0: associated
[   37.524186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   48.323527] wlan0: no IPv6 routers present
[   82.689446] wlan0: deauthenticating from 1c:7e:e5:30:e3:dc by local choice (reason=3)
[   82.835618] cfg80211: All devices are disconnected, going to restore regulatory settings
[   82.835622] cfg80211: Restoring regulatory settings
[   82.835626] cfg80211: Calling CRDA to update world regulatory domain
[   82.839608] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   82.839613] cfg80211: World regulatory domain updated:
[   82.839615] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   82.839618] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   82.839621] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   82.839624] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   82.839626] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   82.839629] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   84.204332] ehci_hcd 0000:00:1a.0: remove, state 1
[   84.204340] usb usb1: USB disconnect, device number 1
[   84.204342] usb 1-1: USB disconnect, device number 2
[   84.204343] usb 1-1.1: USB disconnect, device number 3
[   84.204483] usb 1-1.2: USB disconnect, device number 4
[   84.222231] usb 1-1.4: USB disconnect, device number 5
[   84.454995] ehci_hcd 0000:00:1a.0: USB bus 1 deregistered
[   84.455188] ehci_hcd 0000:00:1d.0: remove, state 4
[   84.455194] usb usb2: USB disconnect, device number 1
[   84.455196] usb 2-1: USB disconnect, device number 2
[   84.459392] ehci_hcd 0000:00:1d.0: USB bus 2 deregistered
[   84.460789] xhci_hcd 0000:04:00.0: remove, state 4
[   84.460795] usb usb4: USB disconnect, device number 1
[   84.460839] xHCI xhci_drop_endpoint called for root hub
[   84.460849] xHCI xhci_check_bandwidth called for root hub
[   84.460966] xhci_hcd 0000:04:00.0: USB bus 4 deregistered
[   84.461029] xhci_hcd 0000:04:00.0: remove, state 4
[   84.461033] usb usb3: USB disconnect, device number 1
[   84.461077] xHCI xhci_drop_endpoint called for root hub
[   84.461079] xHCI xhci_check_bandwidth called for root hub
[   84.595102] xhci_hcd 0000:04:00.0: USB bus 3 deregistered
[   87.112008] PM: Syncing filesystems ... done.
[   87.113724] PM: Preparing system for mem sleep
[   87.113736] Freezing user space processes ... (elapsed 0.01 seconds) done.
[   87.126741] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[   87.142842] PM: Entering mem sleep
[   87.142881] Suspending console(s) (use no_console_suspend to debug)
[   87.143085] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[   87.143141] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   87.143382] sd 1:0:0:0: [sdb] Stopping disk
[   87.298652] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.707 msecs
[   87.320486] sd 0:0:0:0: [sda] Stopping disk
[   87.510523] PM: suspend of drv:sd dev:1:0:0:0 complete after 367.372 msecs
[   87.510704] PM: suspend of drv:scsi dev:target1:0:0 complete after 367.542 msecs
[   87.510713] PM: suspend of drv:scsi dev:host1 complete after 332.226 msecs
[   87.518720] PM: suspend of drv: dev:ata3 complete after 340.090 msecs
[   87.622783] ACPI handle has no context!
[   87.638705] PM: suspend of drv:snd_hda_intel dev:0000:01:00.1 complete after 460.022 msecs
[   87.638877] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 459.676 msecs
[   87.691785] PM: suspend of drv:sd dev:0:0:0:0 complete after 548.553 msecs
[   87.691804] PM: suspend of drv:scsi dev:target0:0:0 complete after 548.559 msecs
[   87.691955] PM: suspend of drv:scsi dev:host0 complete after 513.424 msecs
[   87.698894] PM: suspend of drv: dev:ata2 complete after 520.217 msecs
[   87.714724] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 535.864 msecs
[   87.714890] PM: suspend of drv: dev:pci0000:00 complete after 535.598 msecs
[   87.714902] PM: suspend of devices complete after 571.823 msecs
[   87.714905] PM: suspend devices took 0.572 seconds
[   87.714996] PM: late suspend of devices complete after 0.089 msecs
[   87.715145] r8169 0000:05:00.0: wake-up capability enabled by ACPI
[   87.762857] PM: noirq suspend of devices complete after 47.844 msecs
[   87.763650] ACPI: Preparing to enter system sleep state S3
[   88.028571] PM: Saving platform NVS memory
[   88.029472] Disabling non-boot CPUs ...
[   88.031175] CPU 1 is now offline
[   88.134864] CPU 2 is now offline
[   88.238957] CPU 3 is now offline
[   88.342865] CPU 4 is now offline
[   88.343834] Broke affinity for irq 16
[   88.446918] CPU 5 is now offline
[   88.447806] Broke affinity for irq 12
[   88.550942] CPU 6 is now offline
[   88.551516] Broke affinity for irq 9
[   88.654984] CPU 7 is now offline
[   88.655378] Extended CMOS year: 2000
[   88.656583] ACPI: Low-level resume complete
[   88.656634] PM: Restoring platform NVS memory
[   88.657091] Extended CMOS year: 2000
[   88.657133] Enabling non-boot CPUs ...
[   88.657217] Booting Node 0 Processor 1 APIC 0x2
[   88.670589] NMI watchdog: enabled, takes one hw-pmu counter.
[   88.670866] CPU1 is up
[   88.670944] Booting Node 0 Processor 2 APIC 0x4
[   88.684302] NMI watchdog: enabled, takes one hw-pmu counter.
[   88.684592] CPU2 is up
[   88.684676] Booting Node 0 Processor 3 APIC 0x6
[   88.698039] NMI watchdog: enabled, takes one hw-pmu counter.
[   88.698324] CPU3 is up
[   88.698393] Booting Node 0 Processor 4 APIC 0x1
[   88.711802] NMI watchdog: enabled, takes one hw-pmu counter.
[   88.712100] CPU4 is up
[   88.712171] Booting Node 0 Processor 5 APIC 0x3
[   88.725540] NMI watchdog: enabled, takes one hw-pmu counter.
[   88.725836] CPU5 is up
[   88.725963] Booting Node 0 Processor 6 APIC 0x5
[   88.739437] NMI watchdog: enabled, takes one hw-pmu counter.
[   88.739841] CPU6 is up
[   88.740130] Booting Node 0 Processor 7 APIC 0x7
[   88.753668] NMI watchdog: enabled, takes one hw-pmu counter.
[   88.754137] CPU7 is up
[   88.762352] ACPI: Waking up from system sleep state S3
[   89.773268] power_supply BAT0: parent PNP0C0A:00 should not be sleeping
[   89.922587] PM: noirq resume of devices complete after 1.176 msecs
[   89.922664] PM: early resume of devices complete after 0.043 msecs
[   89.922775] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[   89.922817] r8169 0000:05:00.0: wake-up capability disabled by ACPI
[   89.922824] ahci 0000:00:1f.2: setting latency timer to 64
[   89.922842] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   90.256921] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   90.258885] ata4.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[   90.258888] ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   90.262495] ata4.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[   90.262497] ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   90.263993] ata4.00: configured for UDMA/100
[   90.336931] PM: resume of drv:scsi dev:host2 complete after 413.948 msecs
[   90.336940] PM: resume of drv:scsi_host dev:host2 complete after 413.942 msecs
[   90.336969] PM: resume of drv:scsi dev:target2:0:0 complete after 413.813 msecs
[   90.337007] PM: resume of drv:sr dev:2:0:0:0 complete after 413.835 msecs
[   90.337046] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 413.859 msecs
[   91.817268] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   91.818270] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   91.818550] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[   91.818560] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   91.820508] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   91.820698] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[   91.820705] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   91.821545] ata2.00: configured for UDMA/133
[   91.837412] PM: resume of drv:scsi dev:host0 complete after 1914.184 msecs
[   91.837425] PM: resume of drv:scsi_host dev:host0 complete after 1914.195 msecs
[   91.837430] PM: resume of drv:scsi dev:target0:0:0 complete after 1914.112 msecs
[   91.837433] PM: resume of drv:ata_port dev:ata2 complete after 1897.323 msecs
[   91.837440] PM: resume of drv:sd dev:0:0:0:0 complete after 1914.122 msecs
[   91.837444] sd 0:0:0:0: [sda] Starting disk
[   91.856668] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1933.339 msecs
[   91.865268] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   91.866271] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   91.866553] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[   91.866562] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   91.868513] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   91.868697] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[   91.868704] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   91.869472] ata3.00: configured for UDMA/133
[   91.885432] PM: resume of drv:scsi dev:host1 complete after 1962.189 msecs
[   91.885448] PM: resume of drv:scsi dev:target1:0:0 complete after 1962.116 msecs
[   91.885461] PM: resume of drv:sd dev:1:0:0:0 complete after 1962.098 msecs
[   91.885466] PM: resume of drv:scsi_host dev:host1 complete after 1962.204 msecs
[   91.885470] sd 1:0:0:0: [sdb] Starting disk
[   91.904583] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 1981.159 msecs
[   91.904687] PM: resume of devices complete after 1981.658 msecs
[   91.904765] PM: resume devices took 1.980 seconds
[   91.904786] PM: Finishing wakeup.
[   91.904787] Restarting tasks ... done.
[   91.977090] video LNXVIDEO:00: Restoring backlight state
[   92.276490] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   92.276494] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[   92.276548] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   92.276567] ehci_hcd 0000:00:1a.0: broken D3 during system sleep on ASUS
[   92.276582] ehci_hcd 0000:00:1a.0: debug port 2
[   92.280469] ehci_hcd 0000:00:1a.0: Enabling legacy PCI PM
[   92.280480] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[   92.280487] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6a08000
[   92.289298] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[   92.289467] hub 1-0:1.0: USB hub found
[   92.289471] hub 1-0:1.0: 6 ports detected
[   92.309458] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   92.309462] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[   92.309528] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   92.309543] ehci_hcd 0000:00:1d.0: broken D3 during system sleep on ASUS
[   92.309557] ehci_hcd 0000:00:1d.0: debug port 2
[   92.313446] ehci_hcd 0000:00:1d.0: Enabling legacy PCI PM
[   92.313456] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[   92.313470] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf6a07000
[   92.325310] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[   92.325472] hub 2-0:1.0: USB hub found
[   92.325476] hub 2-0:1.0: 8 ports detected
[   92.489479] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   92.489580] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[   92.601326] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[   92.633150] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf4c00000
[   92.633269] xHCI xhci_add_endpoint called for root hub
[   92.633271] xHCI xhci_check_bandwidth called for root hub
[   92.633290] hub 3-0:1.0: USB hub found
[   92.633295] hub 3-0:1.0: 1 port detected
[   92.645404] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   92.645512] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[   92.645617] xHCI xhci_add_endpoint called for root hub
[   92.645620] xHCI xhci_check_bandwidth called for root hub
[   92.645642] hub 4-0:1.0: USB hub found
[   92.645648] hub 4-0:1.0: 1 port detected
[   92.734053] hub 1-1:1.0: USB hub found
[   92.734142] hub 1-1:1.0: 6 ports detected
[   92.845398] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[   92.942202] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[   92.942354] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   92.978090] hub 2-1:1.0: USB hub found
[   92.978196] hub 2-1:1.0: 6 ports detected
[   93.016904] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   93.049562] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[   93.165054] r8169 0000:05:00.0: eth0: link down
[   93.166024] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   93.217650] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[   93.588662] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2885)
[   93.605726] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input14
[   93.677746] usb 1-1.4: new high-speed USB device number 5 using ehci_hcd
[   93.774193] scsi7 : SCSI emulation for RTS5139 USB card reader
[   93.774418] scsi 7:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   93.774939] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   94.655469] sd 7:0:0:0: [sdc] 15517696 512-byte logical blocks: (7.94 GB/7.39 GiB)
[   94.655484] sd 7:0:0:0: [sdc] Write Protect is off
[   94.655487] sd 7:0:0:0: [sdc] Mode Sense: 67 10 00 00
[   94.655499] sd 7:0:0:0: [sdc] Cache data unavailable
[   94.655501] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[   94.657606] sd 7:0:0:0: [sdc] Cache data unavailable
[   94.657608] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[   94.659859]  sdc: sdc1
[   94.661701] sd 7:0:0:0: [sdc] Cache data unavailable
[   94.661703] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[   94.661705] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   95.489107] wlan0: authenticate with 1c:7e:e5:30:e3:dc
[   95.491430] wlan0: send auth to 1c:7e:e5:30:e3:dc (try 1/3)
[   95.493212] wlan0: authenticated
[   95.493849] wlan0: associate with 1c:7e:e5:30:e3:dc (try 1/3)
[   95.497824] wlan0: RX AssocResp from 1c:7e:e5:30:e3:dc (capab=0x431 status=0 aid=1)
[   95.497826] wlan0: associated
[   95.508317] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  106.455356] wlan0: no IPv6 routers present
[  271.120115] wlan0: disassociated from 1c:7e:e5:30:e3:dc (Reason: 8)
[  271.129412] wlan0: deauthenticating from 1c:7e:e5:30:e3:dc by local choice (reason=3)
[  271.129442] cfg80211: All devices are disconnected, going to restore regulatory settings
[  271.129447] cfg80211: Restoring regulatory settings
[  271.129450] cfg80211: Calling CRDA to update world regulatory domain
[  271.132056] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[  271.132059] cfg80211: World regulatory domain updated:
[  271.132061] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  271.132063] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  271.132065] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  271.132067] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  271.132069] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  271.132070] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  277.087954] wlan0: authenticate with 1c:7e:e5:30:e3:dc
[  277.090257] wlan0: send auth to 1c:7e:e5:30:e3:dc (try 1/3)
[  277.092058] wlan0: authenticated
[  277.093097] wlan0: associate with 1c:7e:e5:30:e3:dc (try 1/3)
[  277.097222] wlan0: RX AssocResp from 1c:7e:e5:30:e3:dc (capab=0x431 status=0 aid=1)
[  277.097233] wlan0: associated
[  416.012369] wlan0: deauthenticating from 1c:7e:e5:30:e3:dc by local choice (reason=3)
[  416.087513] cfg80211: All devices are disconnected, going to restore regulatory settings
[  416.087517] cfg80211: Restoring regulatory settings
[  416.087520] cfg80211: Calling CRDA to update world regulatory domain
[  416.091538] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[  416.091542] cfg80211: World regulatory domain updated:
[  416.091543] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  416.091545] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  416.091547] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  416.091549] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  416.091551] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  416.091553] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  418.661192] wlan0: authenticate with 1c:7e:e5:30:e3:dc
[  418.663621] wlan0: send auth to 1c:7e:e5:30:e3:dc (try 1/3)
[  418.665051] wlan0: authenticated
[  418.668233] wlan0: associate with 1c:7e:e5:30:e3:dc (try 1/3)
[  418.672273] wlan0: RX AssocResp from 1c:7e:e5:30:e3:dc (capab=0x431 status=0 aid=1)
[  418.672277] wlan0: associated