[ 0.000000] Linux version 2.6.22-6-generic (buildd@rothera) (gcc version 4.1.3 20070528 (prerelease) (Ubuntu 4.1.2-9ubuntu2)) #1 SMP Fri Jun 1 19:24:12 GMT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f690000 (usable) [ 0.000000] BIOS-e820: 000000001f690000 - 000000001f698000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f698000 - 000000001f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 502MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f76d0 [ 0.000000] Entering add_active_range(0, 0, 128656) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128656 [ 0.000000] HighMem 128656 -> 128656 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128656 [ 0.000000] On node 0 totalpages: 128656 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 973 pages used for memmap [ 0.000000] Normal zone: 123587 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7590, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 1F691E9C, 003C (r1 FUJ___ DW1_____ 20060721 LTP 0) [ 0.000000] ACPI: FACP 1F697E20, 0074 (r1 FUJ___ DW1_____ 20060721 LOHR 5A) [ 0.000000] ACPI: DSDT 1F6928A4, 557C (r1 FUJ___ DW1_____ 20060721 MSFT 100000E) [ 0.000000] ACPI: FACS 1F698FC0, 0040 [ 0.000000] ACPI: APIC 1F697E94, 0068 (r1 FUJ___ DW1_____ 20060721 LOHR 5A) [ 0.000000] ACPI: BOOT 1F697FD8, 0028 (r1 FUJ___ DW1_____ 20060721 LTP 1) [ 0.000000] ACPI: MCFG 1F697F34, 003C (r1 FUJ___ DW1_____ 20060721 LOHR 5A) [ 0.000000] ACPI: APIC 1F697F70, 0068 (r1 FUJ___ DW1_____ 20060721 LTP 0) [ 0.000000] ACPI: SSDT 1F691ED8, 0500 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) [ 0.000000] Built 1 zonelists. Total pages: 127651 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1596.684 MHz processor. [ 34.784224] Console: colour VGA+ 80x25 [ 34.784420] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 34.784760] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 34.806602] Memory: 498592k/514624k available (2002k kernel code, 15324k reserved, 913k data, 360k init, 0k highmem) [ 34.806621] virtual kernel memory layout: [ 34.806623] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 34.806626] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 34.806629] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 34.806632] lowmem : 0xc0000000 - 0xdf690000 ( 502 MB) [ 34.806635] .init : 0xc03df000 - 0xc0439000 ( 360 kB) [ 34.806638] .data : 0xc02f4a8a - 0xc03d90d4 ( 913 kB) [ 34.806641] .text : 0xc0100000 - 0xc02f4a8a (2002 kB) [ 34.806648] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 34.806716] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, Processors=2, Nodes=1 [ 34.886703] Calibrating delay using timer specific routine.. 3197.67 BogoMIPS (lpj=6395346) [ 34.886745] Security Framework v1.0.0 initialized [ 34.886756] SELinux: Disabled at boot. [ 34.886784] Mount-cache hash table entries: 512 [ 34.886991] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 [ 34.887008] monitor/mwait feature present. [ 34.887012] using mwait in idle threads. [ 34.887020] CPU: L1 I cache: 32K, L1 D cache: 32K [ 34.887026] CPU: L2 cache: 2048K [ 34.887031] CPU: Physical Processor ID: 0 [ 34.887035] CPU: Processor Core ID: 0 [ 34.887039] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 [ 34.887057] Compat vDSO mapped to ffffe000. [ 34.887079] Checking 'hlt' instruction... OK. [ 34.902899] SMP alternatives: switching to UP code [ 34.903529] ACPI: Core revision 20070126 [ 34.964888] CPU0: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08 [ 34.964919] SMP alternatives: switching to SMP code [ 34.964969] Booting processor 1/1 eip 3000 [ 34.975459] Initializing CPU#1 [ 35.054602] Calibrating delay using timer specific routine.. 3193.32 BogoMIPS (lpj=6386643) [ 35.054614] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 [ 35.054625] monitor/mwait feature present. [ 35.054631] CPU: L1 I cache: 32K, L1 D cache: 32K [ 35.054636] CPU: L2 cache: 2048K [ 35.054640] CPU: Physical Processor ID: 0 [ 35.054643] CPU: Processor Core ID: 1 [ 35.054647] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 [ 35.055637] CPU1: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08 [ 35.055679] Total of 2 processors activated (6390.99 BogoMIPS). [ 35.055889] ENABLING IO-APIC IRQs [ 35.056146] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 35.202689] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 35.222709] Brought up 2 CPUs [ 35.558832] migration_cost=72 [ 35.559070] Booting paravirtualized kernel on bare hardware [ 35.559188] Time: 16:41:42 Date: 05/09/107 [ 35.559226] NET: Registered protocol family 16 [ 35.559377] EISA bus registered [ 35.559386] ACPI: bus type pci registered [ 35.559406] PCI: Using MMCONFIG [ 35.560361] Setting up standard PCI resources [ 35.570917] ACPI: Interpreter enabled [ 35.570923] ACPI: (supports S0 S3 S4 S5) [ 35.570957] ACPI: Using IOAPIC for interrupt routing [ 35.583266] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 35.583292] PCI: Probing PCI hardware (bus 00) [ 35.584090] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 35.584098] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 35.585083] PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, disabling [ 35.585523] PCI: Transparent bridge - 0000:00:1e.0 [ 35.585607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 35.586381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 35.586661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 35.586933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 35.587226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 35.593116] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 35.593329] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 35.593535] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 35.593741] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 35.593948] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 35.594153] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 35.594416] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 35.594626] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 35.594868] Linux Plug and Play Support v0.97 (c) Adam Belay [ 35.594887] pnp: PnP ACPI init [ 35.594902] ACPI: bus type pnp registered [ 35.598809] pnp: PnP ACPI: found 8 devices [ 35.598814] ACPI: ACPI bus type pnp unregistered [ 35.598822] PnPBIOS: Disabled by ACPI PNP [ 35.598904] PCI: Using ACPI for IRQ routing [ 35.598910] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 35.599121] NET: Registered protocol family 8 [ 35.599126] NET: Registered protocol family 20 [ 35.599225] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 35.599233] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 35.599240] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 35.599247] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 35.602311] Time: tsc clocksource has been installed. [ 35.629846] PCI: Bridge: 0000:00:1c.0 [ 35.629852] IO window: 2000-2fff [ 35.629861] MEM window: da000000-dbffffff [ 35.629869] PREFETCH window: d4000000-d5ffffff [ 35.629877] PCI: Bridge: 0000:00:1c.1 [ 35.629883] IO window: 3000-3fff [ 35.629891] MEM window: d6000000-d7ffffff [ 35.629898] PREFETCH window: d0000000-d1ffffff [ 35.629906] PCI: Bridge: 0000:00:1c.2 [ 35.629912] IO window: 4000-4fff [ 35.629920] MEM window: d8000000-d9ffffff [ 35.629927] PREFETCH window: d2000000-d3ffffff [ 35.629936] PCI: Bridge: 0000:00:1e.0 [ 35.629942] IO window: 5000-5fff [ 35.629950] MEM window: dc000000-dc0fffff [ 35.629956] PREFETCH window: disabled. [ 35.629991] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 35.630003] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 35.630031] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 35.630041] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 35.630069] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 35.630079] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 35.630094] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) [ 35.630103] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 35.630123] NET: Registered protocol family 2 [ 35.666316] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 35.666369] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 35.666650] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 35.666848] TCP: Hash tables configured (established 16384 bind 16384) [ 35.666853] TCP reno registered [ 35.678507] checking if image is initramfs...<6>Switched to high resolution mode on CPU 1 [ 36.130009] Switched to high resolution mode on CPU 0 [ 36.370019] it is [ 37.098586] Freeing initrd memory: 6994k freed [ 37.098748] Simple Boot Flag value 0x82 read from CMOS RAM was invalid [ 37.098754] Simple Boot Flag at 0x36 set to 0x1 [ 37.099672] audit: initializing netlink socket (disabled) [ 37.099699] audit(1181407302.624:1): initialized [ 37.104044] VFS: Disk quotas dquot_6.5.1 [ 37.104144] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 37.104329] io scheduler noop registered [ 37.104333] io scheduler anticipatory registered [ 37.104338] io scheduler deadline registered [ 37.104368] io scheduler cfq registered (default) [ 37.104386] Boot video device is 0000:00:02.0 [ 37.104648] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 37.104710] assign_interrupt_mode Found MSI capability [ 37.104764] Allocate Port Service[0000:00:1c.0:pcie00] [ 37.104832] Allocate Port Service[0000:00:1c.0:pcie02] [ 37.104896] Allocate Port Service[0000:00:1c.0:pcie03] [ 37.105028] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 37.105089] assign_interrupt_mode Found MSI capability [ 37.105139] Allocate Port Service[0000:00:1c.1:pcie00] [ 37.105212] Allocate Port Service[0000:00:1c.1:pcie02] [ 37.105275] Allocate Port Service[0000:00:1c.1:pcie03] [ 37.105415] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 37.105487] assign_interrupt_mode Found MSI capability [ 37.105537] Allocate Port Service[0000:00:1c.2:pcie00] [ 37.105604] Allocate Port Service[0000:00:1c.2:pcie02] [ 37.105674] Allocate Port Service[0000:00:1c.2:pcie03] [ 37.106018] isapnp: Scanning for PnP cards... [ 37.460323] isapnp: No Plug & Play device found [ 37.508026] Real Time Clock Driver v1.12ac [ 37.508242] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 37.510312] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 37.510561] input: Macintosh mouse button emulation as /class/input/input0 [ 37.510714] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2F] at 0x60,0x64 irq 1,12 [ 37.512732] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 37.512742] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 37.513070] mice: PS/2 mouse device common for all mice [ 37.513341] EISA: Probing bus 0 at eisa.0 [ 37.513353] Cannot allocate resource for EISA slot 1 [ 37.513360] Cannot allocate resource for EISA slot 2 [ 37.513366] Cannot allocate resource for EISA slot 3 [ 37.513371] Cannot allocate resource for EISA slot 4 [ 37.513376] Cannot allocate resource for EISA slot 5 [ 37.513399] EISA: Detected 0 cards. [ 37.513718] TCP cubic registered [ 37.513744] NET: Registered protocol family 1 [ 37.513783] Using IPI No-Shortcut mode [ 37.514096] Magic number: 11:504:691 [ 37.514283] hash matches device acpi_system:00 [ 37.514539] Freeing unused kernel memory: 360k freed [ 37.542718] input: AT Translated Set 2 keyboard as /class/input/input1 [ 38.905009] Capability LSM initialized [ 38.923510] ACPI: SSDT 1F69262D, 01EA (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 38.924253] ACPI: SSDT 1F6923D8, 01D0 (r1 PmRef Cpu0Cst 3001 INTL 20050228) [ 38.924850] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 38.924861] ACPI: Processor [CPU0] (supports 8 throttling states) [ 38.925349] ACPI: SSDT 1F692817, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 38.925767] ACPI: SSDT 1F6925A8, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228) [ 38.926401] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 38.926411] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.956000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.960000] Time: acpi_pm clocksource has been installed. [ 3.960000] ACPI: Thermal Zone [TZ00] (35 C) [ 4.756000] usbcore: registered new interface driver usbfs [ 4.756000] usbcore: registered new interface driver hub [ 4.760000] usbcore: registered new device driver usb [ 4.812000] USB Universal Host Controller Interface driver v3.0 [ 4.812000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 4.812000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 4.812000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.812000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.812000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 [ 4.812000] usb usb1: configuration #1 chosen from 1 choice [ 4.812000] hub 1-0:1.0: USB hub found [ 4.812000] hub 1-0:1.0: 2 ports detected [ 4.836000] SCSI subsystem initialized [ 4.844000] libata version 2.21 loaded. [ 4.928000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 4.928000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 4.928000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.932000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 4.932000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 [ 4.936000] usb usb2: configuration #1 chosen from 1 choice [ 4.936000] hub 2-0:1.0: USB hub found [ 4.936000] hub 2-0:1.0: 2 ports detected [ 4.964000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 4.964000] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.040000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 5.040000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 5.040000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.040000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 5.040000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 5.040000] usb usb3: configuration #1 chosen from 1 choice [ 5.040000] hub 3-0:1.0: USB hub found [ 5.040000] hub 3-0:1.0: 2 ports detected [ 5.148000] Clocksource tsc unstable (delta = -85517731 ns) [ 5.148000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 [ 5.148000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 5.148000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.148000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 5.148000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 [ 5.148000] usb usb4: configuration #1 chosen from 1 choice [ 5.148000] hub 4-0:1.0: USB hub found [ 5.148000] hub 4-0:1.0: 2 ports detected [ 5.252000] ahci 0000:00:1f.2: version 2.2 [ 5.252000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 6.256000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 6.256000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 6.256000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 6.256000] scsi0 : ahci [ 6.256000] scsi1 : ahci [ 6.256000] scsi2 : ahci [ 6.256000] scsi3 : ahci [ 6.256000] ata1: SATA max UDMA/133 cmd 0xe0020500 ctl 0x00000000 bmdma 0x00000000 irq 0 [ 6.256000] ata2: SATA max UDMA/133 cmd 0xe0020580 ctl 0x00000000 bmdma 0x00000000 irq 0 [ 6.256000] ata3: SATA max UDMA/133 cmd 0xe0020600 ctl 0x00000000 bmdma 0x00000000 irq 0 [ 6.256000] ata4: SATA max UDMA/133 cmd 0xe0020680 ctl 0x00000000 bmdma 0x00000000 irq 0 [ 6.744000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.744000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 6.744000] ata1.00: ATA-7: ST98823AS, 3.04, max UDMA/133 [ 6.744000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 6.752000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 6.752000] ata1.00: configured for UDMA/133 [ 7.064000] ata2: SATA link down (SStatus 0 SControl 0) [ 7.132000] hub 3-0:1.0: connect-debounce failed, port 2 disabled [ 7.380000] ata3: SATA link down (SStatus 0 SControl 300) [ 7.688000] ata4: SATA link down (SStatus 0 SControl 0) [ 7.688000] scsi 0:0:0:0: Direct-Access ATA ST98823AS 3.04 PQ: 0 ANSI: 5 [ 7.688000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 7.688000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 7.688000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.692000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 7.692000] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.692000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 7.692000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000 [ 7.696000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.696000] usb usb5: configuration #1 chosen from 1 choice [ 7.700000] hub 5-0:1.0: USB hub found [ 7.700000] hub 5-0:1.0: 8 ports detected [ 7.700000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 7.700000] sd 0:0:0:0: [sda] Write Protect is off [ 7.700000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.700000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.700000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 7.700000] sd 0:0:0:0: [sda] Write Protect is off [ 7.700000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.700000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.700000] sda: sda1 sda2 <<6>ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 7.804000] PCI: Setting latency timer of device 0000:07:08.0 to 64 [ 7.804000] sda5 > [ 7.804000] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.832000] e100: eth0: e100_probe: addr 0xdc000000, irq 21, MAC addr 00:16:36:78:6C:56 [ 7.832000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.840000] ata_piix 0000:00:1f.1: version 2.11 [ 7.840000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 7.840000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 7.840000] scsi4 : ata_piix [ 7.840000] scsi5 : ata_piix [ 7.840000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14 [ 7.840000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15 [ 8.160000] ata5.00: ATAPI, max UDMA/33 [ 8.240000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 8.240000] EXT3-fs: write access will be enabled during recovery. [ 8.324000] ata5.00: configured for UDMA/33 [ 8.324000] ata6: port disabled. ignoring. [ 8.328000] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4082N CW02 PQ: 0 ANSI: 5 [ 8.328000] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 8.328000] PCI: Enabling device 0000:07:09.0 (0000 -> 0002) [ 8.328000] ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 8.328000] PCI: Setting latency timer of device 0000:07:09.0 to 64 [ 8.380000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[dc001000-dc0017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 8.384000] kjournald starting. Commit interval 5 seconds [ 8.384000] EXT3-fs: recovery complete. [ 8.384000] EXT3-fs: mounted filesystem with ordered data mode. [ 8.392000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 8.392000] Uniform CD-ROM driver Revision: 3.20 [ 8.392000] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 9.504000] kjournald starting. Commit interval 5 seconds [ 9.504000] EXT3-fs: mounted filesystem with ordered data mode. [ 9.672000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f0000ae0a0b] [ 10.044000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 10.044000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 10.088000] ISO 9660 Extensions: RRIP_1991A [ 10.140000] Registering unionfs 1.4 [ 10.140000] unionfs: debugging is not enabled [ 10.156000] loop: module loaded [ 10.232000] squashfs: version 3.2-UBUNTU (2007/04/10) Phillip Lougher [ 11.968000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 13.904000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 15.824000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 17.752000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 19.704000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 21.636000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 23.560000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 25.496000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 27.456000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 29.400000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 31.320000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 33.264000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 35.192000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 39.096000] printk: 1 messages suppressed. [ 39.096000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 43.024000] printk: 1 messages suppressed. [ 43.024000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 49.112000] printk: 2 messages suppressed. [ 49.112000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 52.968000] printk: 1 messages suppressed. [ 52.968000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 58.744000] printk: 2 messages suppressed. [ 58.744000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 62.616000] printk: 1 messages suppressed. [ 62.616000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 68.404000] printk: 2 messages suppressed. [ 68.404000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 72.272000] printk: 1 messages suppressed. [ 72.272000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 78.052000] printk: 2 messages suppressed. [ 78.052000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 83.828000] printk: 2 messages suppressed. [ 83.828000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 87.684000] printk: 1 messages suppressed. [ 87.684000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 93.528000] printk: 2 messages suppressed. [ 93.528000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 97.440000] printk: 1 messages suppressed. [ 97.440000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 103.256000] printk: 2 messages suppressed. [ 103.256000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 109.056000] printk: 2 messages suppressed. [ 109.056000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 112.904000] printk: 1 messages suppressed. [ 112.904000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 114.600000] Linux agpgart interface v0.102 (c) Dave Jones [ 114.640000] agpgart: Detected an Intel 945GM Chipset. [ 114.644000] agpgart: Detected 7932K stolen memory. [ 114.664000] agpgart: AGP aperture is 256M @ 0xc0000000 [ 115.420000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 115.468000] NET: Registered protocol family 17 [ 115.520000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 116.264000] iTCO_vendor_support: vendor-support=0 [ 116.460000] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0 [ 116.468000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 116.492000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 116.496000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 116.496000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 116.568000] sdhci: Secure Digital Host Controller Interface driver [ 116.568000] sdhci: Copyright(c) Pierre Ossman [ 116.568000] sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 19) [ 116.568000] PCI: Enabling device 0000:07:09.1 (0000 -> 0002) [ 116.568000] ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 22 [ 116.568000] PCI: Setting latency timer of device 0000:07:09.1 to 64 [ 116.568000] mmc0: SDHCI at 0xdc001800 irq 22 DMA [ 116.716000] ieee80211_crypt: registered algorithm 'NULL' [ 116.780000] intel_rng: FWH not detected [ 116.852000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 116.852000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 116.992000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.1mp [ 116.992000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 116.992000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 116.992000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 117.008000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 117.504000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23 [ 117.504000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 118.612000] fuse init (API version 7.8) [ 118.776000] printk: 2 messages suppressed. [ 118.776000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 119.064000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 119.232000] Adding 1477940k swap on /dev/sda5. Priority:-1 extents:1 across:1477940k [ 122.740000] printk: 1 messages suppressed. [ 122.740000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 128.528000] printk: 2 messages suppressed. [ 128.528000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 132.384000] printk: 1 messages suppressed. [ 132.384000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 138.156000] printk: 2 messages suppressed. [ 138.156000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 143.920000] printk: 2 messages suppressed. [ 143.920000] hub 5-0:1.0: connect-debounce failed, port 6 disabled [ 144.328000] ipw3945: Radio Frequency Kill Switch is On: [ 144.328000] Kill switch must be turned off for wireless networking to work. [ 144.332000] atkbd.c: Unknown key pressed (translated set 2, code 0xe1 on isa0060/serio0). [ 144.332000] atkbd.c: Use 'setkeycodes e061 ' to make it known. [ 144.500000] atkbd.c: Unknown key released (translated set 2, code 0xe1 on isa0060/serio0). [ 144.500000] atkbd.c: Use 'setkeycodes e061 ' to make it known. [ 147.748000] atkbd.c: Unknown key pressed (translated set 2, code 0xe1 on isa0060/serio0). [ 147.748000] atkbd.c: Use 'setkeycodes e061 ' to make it known. [ 147.904000] atkbd.c: Unknown key released (translated set 2, code 0xe1 on isa0060/serio0). [ 147.904000] atkbd.c: Use 'setkeycodes e061 ' to make it known. [ 148.140000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [ 148.488000] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 148.716000] usb 3-2: configuration #1 chosen from 1 choice [ 149.076000] atkbd.c: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0). [ 149.076000] atkbd.c: Use 'setkeycodes e062 ' to make it known. [ 149.248000] usb 3-2: USB disconnect, address 2 [ 149.304000] atkbd.c: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0). [ 149.304000] atkbd.c: Use 'setkeycodes e062 ' to make it known. [ 149.992000] Bluetooth: Core ver 2.11 [ 149.992000] NET: Registered protocol family 31 [ 149.992000] Bluetooth: HCI device and connection manager initialized [ 149.992000] Bluetooth: HCI socket layer initialized [ 150.052000] Bluetooth: HCI USB driver ver 2.9 [ 150.052000] usbcore: registered new interface driver hci_usb [ 157.508000] NET: Registered protocol family 10 [ 157.508000] lo: Disabled Privacy Extensions [ 157.508000] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 157.508000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 170.104000] ACPI: AC Adapter [ACAD] (off-line) [ 170.352000] ACPI: Battery Slot [BAT1] (battery present) [ 170.400000] ACPI: ACPI Dock Station Driver [ 170.464000] input: Power Button (FF) as /class/input/input3 [ 170.464000] ACPI: Power Button (FF) [PWRF] [ 170.464000] input: Power Button (CM) as /class/input/input4 [ 170.464000] ACPI: Power Button (CM) [PWRB] [ 170.468000] input: Sleep Button (CM) as /class/input/input5 [ 170.472000] ACPI: Sleep Button (CM) [SLPB] [ 170.476000] input: Lid Switch as /class/input/input6 [ 170.476000] ACPI: Lid Switch [LID] [ 170.788000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 170.824000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 170.824000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 178.888000] lp: driver loaded but no devices found [ 179.036000] ppdev: user-space parallel port driver [ 180.460000] [drm] Initialized drm 1.1.0 20060810 [ 180.492000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 180.496000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 186.948000] apm: BIOS not found. [ 189.176000] Bluetooth: L2CAP ver 2.8 [ 189.176000] Bluetooth: L2CAP socket layer initialized [ 189.540000] Bluetooth: RFCOMM socket layer initialized [ 189.540000] Bluetooth: RFCOMM TTY layer initialized [ 189.540000] Bluetooth: RFCOMM ver 1.8 [ 301.020000] usb 1-2: new low speed USB device using uhci_hcd and address 2 [ 301.192000] usb 1-2: configuration #1 chosen from 1 choice [ 305.140000] usbcore: registered new interface driver hiddev [ 305.152000] input: Acrox USB & PS/2 Mouse as /class/input/input7 [ 305.152000] input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:1d.0-2 [ 305.152000] usbcore: registered new interface driver usbhid [ 305.152000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 1194.588000] usb 5-1: new high speed USB device using ehci_hcd and address 4 [ 1194.724000] usb 5-1: configuration #1 chosen from 1 choice [ 1198.960000] usbcore: registered new interface driver libusual [ 1199.072000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1199.072000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1199.156000] Initializing USB Mass Storage driver... [ 1199.156000] scsi6 : SCSI emulation for USB Mass Storage devices [ 1199.160000] usb-storage: device found at 4 [ 1199.160000] usb-storage: waiting for device to settle before scanning [ 1199.160000] usbcore: registered new interface driver usb-storage [ 1199.160000] USB Mass Storage support registered. [ 1204.160000] usb-storage: device scan complete [ 1204.160000] scsi 6:0:0:0: Direct-Access USB DRIVE 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 1205.452000] sd 6:0:0:0: [sdb] 2009088 512-byte hardware sectors (1029 MB) [ 1205.452000] sd 6:0:0:0: [sdb] Write Protect is off [ 1205.452000] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1205.452000] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1205.456000] sd 6:0:0:0: [sdb] 2009088 512-byte hardware sectors (1029 MB) [ 1205.456000] sd 6:0:0:0: [sdb] Write Protect is off [ 1205.456000] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1205.456000] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1205.456000] sdb: sdb1 [ 1205.456000] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 1205.456000] sd 6:0:0:0: Attached scsi generic sg2 type 0