[ 0.000000] Linux version 2.6.20-12-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed Mar 21 20:55:46 UTC 2007 (Ubuntu 2.6.20-12.20-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f6c0000 end: 000000001f7c0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000001f7c0000 size: 000000000000e000 end: 000000001f7ce000 type: 3 [ 0.000000] copy_e820_map() start: 000000001f7ce000 size: 0000000000032000 end: 000000001f800000 type: 4 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7c0000 (usable) [ 0.000000] BIOS-e820: 000000001f7c0000 - 000000001f7ce000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f7ce000 - 000000001f800000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 503MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 128960) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128960 [ 0.000000] HighMem 128960 -> 128960 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128960 [ 0.000000] On node 0 totalpages: 128960 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 975 pages used for memmap [ 0.000000] Normal zone: 123889 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f7a00 [ 0.000000] ACPI: RSDT (v001 A.M.I. OEMRSDT 0x09000627 MSFT 0x00000097) @ 0x1f7c0000 [ 0.000000] ACPI: FADT (v002 A.M.I. OEMFACP 0x09000627 MSFT 0x00000097) @ 0x1f7c0200 [ 0.000000] ACPI: MADT (v001 A.M.I. OEMAPIC 0x09000627 MSFT 0x00000097) @ 0x1f7c0390 [ 0.000000] ACPI: MCFG (v001 A.M.I. OEMMCFG 0x09000627 MSFT 0x00000097) @ 0x1f7c03f0 [ 0.000000] ACPI: BOOT (v001 A.M.I. OEMBOOT 0x09000627 MSFT 0x00000097) @ 0x1f7c05b0 [ 0.000000] ACPI: SLIC (v001 A.M.I. OEMSLIC 0x09000627 MSFT 0x00000097) @ 0x1f7c0430 [ 0.000000] ACPI: OEMB (v001 A.M.I. AMI_OEM 0x09000627 MSFT 0x00000097) @ 0x1f7ce040 [ 0.000000] ACPI: HPET (v001 A.M.I. OEMHPET 0x09000627 MSFT 0x00000097) @ 0x1f7c9cf0 [ 0.000000] ACPI: DSDT (v001 Z35F00 Z35F0005 0x00000005 INTL 0x02002026) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed02000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000) [ 0.000000] Detected 1662.589 MHz processor. [ 17.191992] Built 1 zonelists. Total pages: 127953 [ 17.191997] Kernel command line: root=UUID=885fa030-ac64-48cf-bfdd-a01c3f2e9c99 ro quiet splash [ 17.192156] mapped APIC to ffffd000 (fee00000) [ 17.192159] mapped IOAPIC to ffffc000 (fec00000) [ 17.192162] Enabling fast FPU save and restore... done. [ 17.192164] Enabling unmasked SIMD FPU exception support... done. [ 17.192172] Initializing CPU#0 [ 17.192235] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 17.193639] Console: colour VGA+ 80x25 [ 17.193783] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 17.193967] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 17.205213] Memory: 500288k/515840k available (1990k kernel code, 14892k reserved, 890k data, 328k init, 0k highmem) [ 17.205223] virtual kernel memory layout: [ 17.205224] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 17.205225] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 17.205227] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 17.205228] lowmem : 0xc0000000 - 0xdf7c0000 ( 503 MB) [ 17.205229] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) [ 17.205231] .data : 0xc02f1b04 - 0xc03d06d4 ( 890 kB) [ 17.205232] .text : 0xc0100000 - 0xc02f1b04 (1990 kB) [ 17.205236] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 17.284109] Calibrating delay using timer specific routine.. 3328.90 BogoMIPS (lpj=6657803) [ 17.284148] Security Framework v1.0.0 initialized [ 17.284155] SELinux: Disabled at boot. [ 17.284171] Mount-cache hash table entries: 512 [ 17.284295] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 [ 17.284303] monitor/mwait feature present. [ 17.284305] using mwait in idle threads. [ 17.284309] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.284311] CPU: L2 cache: 2048K [ 17.284314] CPU: Physical Processor ID: 0 [ 17.284316] CPU: Processor Core ID: 0 [ 17.284318] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 [ 17.284327] Compat vDSO mapped to ffffe000. [ 17.284330] Remapping vsyscall page to ffffe000 [ 17.284342] Checking 'hlt' instruction... OK. [ 17.300181] SMP alternatives: switching to UP code [ 17.300510] Early unpacking initramfs... done [ 17.630772] ACPI: Core revision 20060707 [ 17.630988] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 17.649313] CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 [ 17.649333] SMP alternatives: switching to SMP code [ 17.649444] Booting processor 1/1 eip 3000 [ 17.659871] Initializing CPU#1 [ 17.739437] Calibrating delay using timer specific routine.. 3325.28 BogoMIPS (lpj=6650570) [ 17.739443] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 [ 17.739449] monitor/mwait feature present. [ 17.739452] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.739454] CPU: L2 cache: 2048K [ 17.739456] CPU: Physical Processor ID: 0 [ 17.739458] CPU: Processor Core ID: 1 [ 17.739460] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 [ 17.739891] CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 [ 17.739914] Total of 2 processors activated (6654.18 BogoMIPS). [ 17.740109] ENABLING IO-APIC IRQs [ 17.740308] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 17.887235] checking TSC synchronization across 2 CPUs: passed. [ 0.003983] Brought up 2 CPUs [ 0.171034] migration_cost=46 [ 0.171309] Booting paravirtualized kernel on bare hardware [ 0.171394] Time: 15:47:46 Date: 02/29/107 [ 0.171423] NET: Registered protocol family 16 [ 0.171508] EISA bus registered [ 0.171512] ACPI: bus type pci registered [ 0.171707] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.171709] PCI: Using configuration type 1 [ 0.171711] Setting up standard PCI resources [ 0.238687] ACPI: Interpreter enabled [ 0.238689] ACPI: Using IOAPIC for interrupt routing [ 0.239224] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.239232] PCI: Probing PCI hardware (bus 00) [ 0.239602] Boot video device is 0000:00:02.0 [ 0.240214] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.240218] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.241188] PCI: Transparent bridge - 0000:00:1e.0 [ 0.241251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.246492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.251961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.252352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.254837] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12) [ 0.255217] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12) [ 0.255596] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 12) [ 0.255981] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 0.256360] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 12) [ 0.256737] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 12) [ 0.257114] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled. [ 0.257493] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 12) [ 0.258055] ACPI: Power Resource [GFAN] (off) [ 0.258092] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.258107] pnp: PnP ACPI init [ 0.261413] pnp: PnP ACPI: found 14 devices [ 0.261417] PnPBIOS: Disabled by ACPI PNP [ 0.261459] PCI: Using ACPI for IRQ routing [ 0.261462] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.277077] NET: Registered protocol family 8 [ 0.277079] NET: Registered protocol family 20 [ 0.278136] pnp: 00:0b: ioport range 0x250-0x253 has been reserved [ 0.278139] pnp: 00:0b: ioport range 0x256-0x25f has been reserved [ 0.278417] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [ 0.278421] PCI: Bridge: 0000:00:1c.0 [ 0.278424] IO window: b000-cfff [ 0.278431] MEM window: fa700000-fe6fffff [ 0.278436] PREFETCH window: aff00000-bfefffff [ 0.278442] PCI: Bridge: 0000:00:1c.1 [ 0.278443] IO window: disabled. [ 0.278449] MEM window: fe700000-fe7fffff [ 0.278454] PREFETCH window: disabled. [ 0.278460] PCI: Bridge: 0000:00:1e.0 [ 0.278463] IO window: d000-dfff [ 0.278469] MEM window: fe800000-fe8fffff [ 0.278474] PREFETCH window: disabled. [ 0.278504] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.278511] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.278535] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.278541] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.278555] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.278584] NET: Registered protocol family 2 [ 0.315595] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.315673] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.315769] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.315818] TCP: Hash tables configured (established 16384 bind 8192) [ 0.315821] TCP reno registered [ 0.327640] checking if image is initramfs... it is [ 0.986170] Freeing initrd memory: 6734k freed [ 0.986368] Simple Boot Flag at 0x52 set to 0x1 [ 0.986856] audit: initializing netlink socket (disabled) [ 0.986873] audit(1175183266.696:1): initialized [ 0.987044] VFS: Disk quotas dquot_6.5.1 [ 0.987065] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.987117] io scheduler noop registered [ 0.987119] io scheduler anticipatory registered [ 0.987122] io scheduler deadline registered [ 0.987133] io scheduler cfq registered (default) [ 0.987379] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.987436] assign_interrupt_mode Found MSI capability [ 0.987439] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.987475] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.987601] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.987656] assign_interrupt_mode Found MSI capability [ 0.987659] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.987695] Allocate Port Service[0000:00:1c.1:pcie02] [ 0.987872] isapnp: Scanning for PnP cards... [ 1.341225] isapnp: No Plug & Play device found [ 1.364906] Real Time Clock Driver v1.12ac [ 1.364976] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.365622] mice: PS/2 mouse device common for all mice [ 1.366404] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.366552] input: Macintosh mouse button emulation as /class/input/input0 [ 1.366587] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.366592] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.366832] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.368997] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.370164] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.370168] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.370172] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.370174] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.370177] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.370268] EISA: Probing bus 0 at eisa.0 [ 1.370308] EISA: Detected 0 cards. [ 1.400364] TCP cubic registered [ 1.400373] NET: Registered protocol family 1 [ 1.400397] Starting balanced_irq [ 1.400403] Using IPI No-Shortcut mode [ 1.400477] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1.400560] ACPI: (supports S0 S3 S4 S5) [ 1.400614] Magic number: 15:985:791 [ 1.400890] Freeing unused kernel memory: 328k freed [ 1.401921] Time: tsc clocksource has been installed. [ 2.589876] Capability LSM initialized [ 2.619165] ACPI: Transitioning device [FN00] to D3 [ 2.619169] ACPI: Transitioning device [FN00] to D3 [ 2.619172] ACPI: Fan [FN00] (off) [ 2.623077] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707] [ 2.627386] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 2.627391] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.627838] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707] [ 3.156000] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 3.156000] ACPI: Processor [CPU2] (supports 8 throttling states) [ 3.164000] Time: acpi_pm clocksource has been installed. [ 3.556000] ACPI: Thermal Zone [THRM] (56 C) [ 3.884000] SCSI subsystem initialized [ 3.888000] libata version 2.20 loaded. [ 3.892000] ata_piix 0000:00:1f.1: version 2.10ac1 [ 3.892000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 3.892000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 3.892000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 [ 3.892000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 [ 3.892000] scsi0 : ata_piix [ 3.900000] usbcore: registered new interface driver usbfs [ 3.900000] usbcore: registered new interface driver hub [ 3.900000] usbcore: registered new device driver usb [ 3.916000] USB Universal Host Controller Interface driver v3.0 [ 4.004000] ieee1394: Initialized config rom entry `ip1394' [ 4.020000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.056000] ata1.00: ATA-6: HTS541040G9AT00, MB2OA60A, max UDMA/100 [ 4.056000] ata1.00: 78140160 sectors, multi 16: LBA48 [ 4.244000] ata1.01: ATAPI, max UDMA/33 [ 4.252000] ata1.00: configured for UDMA/33 [ 4.440000] ata1.01: configured for UDMA/33 [ 4.440000] scsi1 : ata_piix [ 4.440000] ata2: port disabled. ignoring. [ 4.440000] ata2: reset failed, giving up [ 4.440000] scsi 0:0:0:0: Direct-Access ATA HTS541040G9AT00 MB2O PQ: 0 ANSI: 5 [ 4.448000] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L632D AS05 PQ: 0 ANSI: 5 [ 4.448000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 4.448000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 4.448000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.448000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.448000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e880 [ 4.448000] usb usb1: configuration #1 chosen from 1 choice [ 4.448000] hub 1-0:1.0: USB hub found [ 4.448000] hub 1-0:1.0: 2 ports detected [ 4.456000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4.456000] sda: Write Protect is off [ 4.456000] sda: Mode Sense: 00 3a 00 00 [ 4.456000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.456000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4.456000] sda: Write Protect is off [ 4.456000] sda: Mode Sense: 00 3a 00 00 [ 4.456000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.456000] sda: sda1 sda2 < sda5 > [ 4.516000] sd 0:0:0:0: Attached scsi disk sda [ 4.520000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.520000] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 4.552000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 4.552000] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 4.552000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 4.552000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.552000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 4.552000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800 [ 4.552000] usb usb2: configuration #1 chosen from 1 choice [ 4.552000] hub 2-0:1.0: USB hub found [ 4.552000] hub 2-0:1.0: 2 ports detected [ 4.604000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fe8ff800-fe8fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 4.636000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.636000] Uniform CD-ROM driver Revision: 3.20 [ 4.636000] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 4.656000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 4.656000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 4.656000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.656000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 4.656000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480 [ 4.656000] usb usb3: configuration #1 chosen from 1 choice [ 4.656000] hub 3-0:1.0: USB hub found [ 4.656000] hub 3-0:1.0: 2 ports detected [ 4.760000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 4.760000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 4.760000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 4.760000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 4.760000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 4.764000] usb usb4: configuration #1 chosen from 1 choice [ 4.764000] hub 4-0:1.0: USB hub found [ 4.764000] hub 4-0:1.0: 2 ports detected [ 4.868000] 8139cp 0000:05:04.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 4.868000] 8139cp 0000:05:04.0: Try the "8139too" driver instead. [ 4.868000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 4.868000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.868000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.868000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.868000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.868000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.868000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfeb3bc00 [ 4.872000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.872000] 8139too Fast Ethernet driver 0.9.28 [ 4.872000] usb usb5: configuration #1 chosen from 1 choice [ 4.872000] hub 5-0:1.0: USB hub found [ 4.872000] hub 5-0:1.0: 8 ports detected [ 4.976000] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 20 (level, low) -> IRQ 22 [ 4.976000] eth0: RealTek RTL8139 at 0xe0056400, 00:18:f3:83:34:a9, IRQ 22 [ 4.976000] eth0: Identified 8139 chip type 'RTL-8101' [ 5.112000] Attempting manual resume [ 5.112000] swsusp: Resume From Partition 8:5 [ 5.112000] PM: Checking swsusp image. [ 5.112000] PM: Resume from disk failed. [ 5.124000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.124000] EXT3-fs: write access will be enabled during recovery. [ 5.504000] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 5.760000] usb 3-2: configuration #1 chosen from 1 choice [ 5.888000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800036bab99] [ 6.432000] kjournald starting. Commit interval 5 seconds [ 6.432000] EXT3-fs: recovery complete. [ 6.432000] EXT3-fs: mounted filesystem with ordered data mode. [ 15.596000] eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 16.388000] input: PC Speaker as /class/input/input2 [ 16.524000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.528000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.616000] intel_rng: FWH not detected [ 16.684000] Linux agpgart interface v0.101 (c) Dave Jones [ 16.720000] iTCO_vendor_support: vendor-support=0 [ 16.720000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 16.736000] agpgart: Detected an Intel 945GM Chipset. [ 16.736000] agpgart: Detected 7932K stolen memory. [ 16.764000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 17.208000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 17.248000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 17.248000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860) [ 17.248000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.316000] ieee80211_crypt: registered algorithm 'NULL' [ 17.316000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 17.316000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 17.344000] Bluetooth: Core ver 2.11 [ 17.344000] NET: Registered protocol family 31 [ 17.344000] Bluetooth: HCI device and connection manager initialized [ 17.344000] Bluetooth: HCI socket layer initialized [ 17.356000] Bluetooth: HCI USB driver ver 2.9 [ 17.436000] sdhci: Secure Digital Host Controller Interface driver, 0.12 [ 17.436000] sdhci: Copyright(c) Pierre Ossman [ 17.436000] sdhci: SDHCI controller found at 0000:05:03.1 [1180:0822] (rev 19) [ 17.436000] ACPI: PCI Interrupt 0000:05:03.1[B] -> GSI 20 (level, low) -> IRQ 22 [ 17.436000] sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support. [ 17.436000] mmc0: SDHCI at 0xfe8ff400 irq 22 DMA [ 17.456000] usbcore: registered new interface driver hci_usb [ 17.456000] NET: Registered protocol family 17 [ 17.532000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp [ 17.532000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 17.536000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 17.536000] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 17.536000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 17.684000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.684000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 18.288000] lp: driver loaded but no devices found [ 18.320000] Adding 1485972k swap on /dev/disk/by-uuid/58638bbd-3426-4551-a098-e3dff3d95da2. Priority:-1 extents:1 across:1485972k [ 18.512000] EXT3 FS on sda1, internal journal [ 18.852000] NET: Registered protocol family 10 [ 18.852000] lo: Disabled Privacy Extensions [ 19.036000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 19.064000] ibm_acpi: ec object not found [ 19.100000] input: Power Button (FF) as /class/input/input4 [ 19.100000] ACPI: Power Button (FF) [PWRF] [ 19.100000] input: Lid Switch as /class/input/input5 [ 19.100000] ACPI: Lid Switch [LID] [ 19.100000] input: Sleep Button (CM) as /class/input/input6 [ 19.100000] ACPI: Sleep Button (CM) [SLPB] [ 19.100000] input: Power Button (CM) as /class/input/input7 [ 19.100000] ACPI: Power Button (CM) [PWRB] [ 19.444000] Using specific hotkey driver [ 19.452000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 19.612000] Asus Laptop ACPI Extras version 0.30 [ 19.612000] unsupported model Z35FM, trying default values [ 19.612000] send /proc/acpi/dsdt to the developers [ 19.676000] ACPI: Battery Slot [BAT0] (battery present) [ 19.700000] No dock devices found. [ 19.712000] ACPI: AC Adapter [AC0] (on-line) [ 19.724000] pcc_acpi: loading... [ 23.688000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 26.116000] [drm] Initialized drm 1.1.0 20060810 [ 26.120000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.120000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 26.852000] ppdev: user-space parallel port driver [ 29.968000] apm: BIOS not found. [ 30.916000] Bluetooth: L2CAP ver 2.8 [ 30.916000] Bluetooth: L2CAP socket layer initialized [ 31.084000] Bluetooth: RFCOMM socket layer initialized [ 31.084000] Bluetooth: RFCOMM TTY layer initialized [ 31.084000] Bluetooth: RFCOMM ver 1.8 [ 38.220000] eth0: no IPv6 routers present [ 68.324000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 68.324000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in [ 68.324000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 75.328000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 98.352000] ata1: port failed to respond (30 secs, Status 0xd0) [ 98.352000] ata1: soft resetting port [ 98.704000] ata1.00: configured for UDMA/33 [ 98.884000] ata1.01: configured for UDMA/33 [ 98.884000] ata1: EH complete [ 98.900000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 98.916000] sda: Write Protect is off [ 98.916000] sda: Mode Sense: 00 3a 00 00 [ 98.948000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 98.956000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 98.956000] sda: Write Protect is off [ 98.956000] sda: Mode Sense: 00 3a 00 00 [ 98.960000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 225.620000] eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 226.036000] ACPI: PCI interrupt for device 0000:05:04.0 disabled [ 226.104000] ACPI: PCI interrupt for device 0000:04:00.0 disabled [ 226.116000] ieee80211_crypt: unregistered algorithm 'NULL' [ 228.008000] PM: suspend-to-disk mode set to 'shutdown' [ 228.008000] Disabling non-boot CPUs ... [ 228.144000] CPU 1 is now offline [ 228.144000] SMP alternatives: switching to UP code [ 228.148000] CPU1 is down [ 228.148000] Stopping tasks ... done. [ 228.552000] Shrinking memory... -\|done (23760 pages freed) [ 228.944000] Freed 95040 kbytes in 0.39 seconds (243.69 MB/s) [ 228.944000] Suspending console(s) [ 228.944000] platform bluetooth: freeze [ 228.944000] iTCO_wdt iTCO_wdt: freeze [ 228.944000] usb 3-2:1.2: PM: suspend 2-->1 [ 228.944000] hci_usb 3-2:1.1: freeze [ 228.944000] hci_usb 3-2:1.0: freeze [ 228.944000] usb 3-2: freeze [ 228.968000] usbdev5.1_ep81: PM: suspend 0->1, parent 5-0:1.0 already 2 [ 228.968000] hub 5-0:1.0: PM: suspend 2-->1 [ 228.968000] hub 5-0:1.0: PM: suspend 2->1, parent usb5 already 2 [ 228.968000] usbdev5.1_ep00: PM: suspend 0->1, parent usb5 already 2 [ 228.968000] usb usb5: PM: suspend 2-->1 [ 228.968000] usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2 [ 228.968000] hub 4-0:1.0: PM: suspend 2-->1 [ 228.968000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2 [ 228.968000] usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2 [ 228.968000] usb usb4: PM: suspend 2-->1 [ 228.968000] hub 3-0:1.0: freeze [ 228.968000] usb usb3: freeze [ 228.968000] usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2 [ 228.968000] hub 2-0:1.0: PM: suspend 2-->1 [ 228.968000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2 [ 228.968000] usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2 [ 228.968000] usb usb2: PM: suspend 2-->1 [ 228.968000] usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2 [ 228.968000] hub 1-0:1.0: PM: suspend 2-->1 [ 228.968000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2 [ 228.968000] usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2 [ 228.968000] usb usb1: PM: suspend 2-->1 [ 228.968000] sr 0:0:1:0: freeze [ 228.980000] sd 0:0:0:0: freeze [ 229.184000] platform vesafb.0: freeze [ 229.184000] platform eisa.0: freeze [ 229.184000] i8042 i8042: freeze [ 229.700000] serial8250 serial8250: freeze [ 229.700000] pci_express 0000:00:1c.1:pcie02: freeze [ 229.700000] pci_express 0000:00:1c.1:pcie00: freeze [ 229.700000] pci_express 0000:00:1c.0:pcie02: freeze [ 229.700000] pci_express 0000:00:1c.0:pcie00: freeze [ 229.700000] pcspkr pcspkr: freeze [ 229.700000] system 00:0d: freeze [ 229.700000] system 00:0c: freeze [ 229.700000] system 00:0b: freeze [ 229.700000] system 00:0a: freeze [ 229.700000] system 00:09: freeze [ 229.700000] system 00:08: freeze [ 229.700000] pnp 00:07: freeze [ 229.700000] pnp 00:06: freeze [ 229.700000] i8042 aux 00:05: freeze [ 229.700000] i8042 kbd 00:04: freeze [ 229.700000] pnp 00:03: freeze [ 229.700000] pnp 00:02: freeze [ 229.700000] system 00:01: freeze [ 229.700000] pnp 00:00: freeze [ 229.700000] pci 0000:05:04.0: freeze [ 229.700000] pci 0000:05:03.4: freeze [ 229.700000] pci 0000:05:03.3: freeze [ 229.700000] pci 0000:05:03.2: freeze [ 229.700000] sdhci 0000:05:03.1: freeze [ 229.700000] ACPI: PCI interrupt for device 0000:05:03.1 disabled [ 229.716000] ohci1394 0000:05:03.0: freeze [ 229.716000] ohci1394 does not fully support suspend and resume yet [ 229.740000] pci 0000:04:00.0: freeze [ 229.740000] ata_piix 0000:00:1f.1: freeze [ 229.744000] ata2: port disabled. ignoring. [ 229.744000] ata2: reset failed, giving up [ 229.744000] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 229.744000] pci 0000:00:1f.0: freeze [ 229.744000] pci 0000:00:1e.0: freeze [ 229.744000] ehci_hcd 0000:00:1d.7: freeze [ 229.744000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 229.760000] uhci_hcd 0000:00:1d.3: freeze [ 229.760000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 229.760000] uhci_hcd 0000:00:1d.2: freeze [ 229.760000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 229.760000] uhci_hcd 0000:00:1d.1: freeze [ 229.760000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 229.760000] uhci_hcd 0000:00:1d.0: freeze [ 229.760000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 229.760000] pcieport-driver 0000:00:1c.1: freeze [ 229.760000] pcieport-driver 0000:00:1c.0: freeze [ 229.764000] HDA Intel 0000:00:1b.0: freeze [ 229.772000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 229.788000] pci 0000:00:02.1: freeze [ 229.788000] pci 0000:00:02.0: freeze [ 229.788000] agpgart-intel 0000:00:00.0: freeze [ 229.788000] acpi acpi: freeze [ 229.792000] PM: snapshotting memory. [ 229.792000] platform bluetooth: LATE freeze [ 229.792000] iTCO_wdt iTCO_wdt: LATE freeze [ 229.792000] platform vesafb.0: LATE freeze [ 229.792000] platform eisa.0: LATE freeze [ 229.792000] i8042 i8042: LATE freeze [ 229.792000] serial8250 serial8250: LATE freeze [ 229.792000] pcspkr pcspkr: LATE freeze [ 229.792000] pci 0000:05:04.0: LATE freeze [ 229.792000] pci 0000:05:03.4: LATE freeze [ 229.792000] pci 0000:05:03.3: LATE freeze [ 229.792000] pci 0000:05:03.2: LATE freeze [ 229.792000] sdhci 0000:05:03.1: LATE freeze [ 229.792000] ohci1394 0000:05:03.0: LATE freeze [ 229.792000] pci 0000:04:00.0: LATE freeze [ 229.792000] pci 0000:00:1f.0: LATE freeze [ 229.792000] pci 0000:00:1e.0: LATE freeze [ 229.792000] pcieport-driver 0000:00:1c.1: LATE freeze [ 229.792000] pcieport-driver 0000:00:1c.0: LATE freeze [ 229.792000] HDA Intel 0000:00:1b.0: LATE freeze [ 229.792000] pci 0000:00:02.1: LATE freeze [ 229.792000] pci 0000:00:02.0: LATE freeze [ 229.792000] agpgart-intel 0000:00:00.0: LATE freeze [ 229.792000] swsusp: critical section: [ 229.792000] swsusp: Need to copy 62646 pages [ 229.792000] swsusp: Normal pages needed: 62646 + 1024 + 14, available pages: 66312 [ 407.792000] agpgart-intel 0000:00:00.0: EARLY resume [ 407.792000] pci 0000:00:02.0: EARLY resume [ 407.792000] pci 0000:00:02.1: EARLY resume [ 407.792000] HDA Intel 0000:00:1b.0: EARLY resume [ 407.792000] pcieport-driver 0000:00:1c.0: EARLY resume [ 407.792000] pcieport-driver 0000:00:1c.1: EARLY resume [ 407.792000] uhci_hcd 0000:00:1d.0: EARLY resume [ 407.792000] uhci_hcd 0000:00:1d.1: EARLY resume [ 407.792000] uhci_hcd 0000:00:1d.2: EARLY resume [ 407.792000] uhci_hcd 0000:00:1d.3: EARLY resume [ 407.792000] ehci_hcd 0000:00:1d.7: EARLY resume [ 407.792000] pci 0000:00:1e.0: EARLY resume [ 407.792000] pci 0000:00:1f.0: EARLY resume [ 407.792000] ata_piix 0000:00:1f.1: EARLY resume [ 407.792000] pci 0000:04:00.0: EARLY resume [ 407.792000] ohci1394 0000:05:03.0: EARLY resume [ 407.792000] sdhci 0000:05:03.1: EARLY resume [ 407.792000] pci 0000:05:03.2: EARLY resume [ 407.792000] pci 0000:05:03.3: EARLY resume [ 407.792000] pci 0000:05:03.4: EARLY resume [ 407.792000] pci 0000:05:04.0: EARLY resume [ 407.792000] pcspkr pcspkr: EARLY resume [ 407.792000] serial8250 serial8250: EARLY resume [ 407.792000] i8042 i8042: EARLY resume [ 407.792000] platform eisa.0: EARLY resume [ 407.792000] platform vesafb.0: EARLY resume [ 407.792000] iTCO_wdt iTCO_wdt: EARLY resume [ 407.792000] platform bluetooth: EARLY resume [ 407.792000] PM: Image restored successfully. [ 407.800000] acpi acpi: resuming [ 407.804000] ACPI: Transitioning device [FN00] to D3 [ 407.804000] ACPI: Transitioning device [FN00] to D3 [ 407.804000] agpgart-intel 0000:00:00.0: resuming [ 407.820000] pci 0000:00:02.0: resuming [ 407.820000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 407.820000] pci 0000:00:02.1: resuming [ 407.820000] HDA Intel 0000:00:1b.0: resuming [ 407.836000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002) [ 407.836000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 407.836000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 407.928000] pcieport-driver 0000:00:1c.0: resuming [ 407.928000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 407.928000] pcieport-driver 0000:00:1c.1: resuming [ 407.928000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 407.928000] uhci_hcd 0000:00:1d.0: resuming [ 407.928000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 407.928000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 407.928000] usb usb1: root hub lost power or was reset [ 407.928000] uhci_hcd 0000:00:1d.1: resuming [ 407.928000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 407.928000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 407.928000] usb usb2: root hub lost power or was reset [ 407.928000] uhci_hcd 0000:00:1d.2: resuming [ 407.928000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 407.928000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 407.928000] usb usb3: root hub lost power or was reset [ 407.928000] uhci_hcd 0000:00:1d.3: resuming [ 407.928000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 407.928000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 407.928000] usb usb4: root hub lost power or was reset [ 407.928000] ehci_hcd 0000:00:1d.7: resuming [ 407.944000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 407.944000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 407.944000] usb usb5: root hub lost power or was reset [ 407.948000] ehci_hcd 0000:00:1d.7: debug port 1 [ 407.948000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 407.948000] pci 0000:00:1e.0: resuming [ 407.948000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 407.948000] pci 0000:00:1f.0: resuming [ 407.948000] ata_piix 0000:00:1f.1: resuming [ 407.948000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880001, writing 2880005) [ 407.948000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 407.948000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 407.948000] ata2: port disabled. ignoring. [ 407.948000] ata2: reset failed, giving up [ 407.948000] pci 0000:04:00.0: resuming [ 407.948000] PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100006, writing 100002) [ 407.948000] ohci1394 0000:05:03.0: resuming [ 407.964000] PM: Writing back config space on device 0000:05:03.0 at offset 4 (was 0, writing fe8ff800) [ 407.964000] PM: Writing back config space on device 0000:05:03.0 at offset 3 (was 800000, writing 804000) [ 407.964000] PM: Writing back config space on device 0000:05:03.0 at offset 1 (was 2100000, writing 2100006) [ 408.016000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fe8ff800-fe8fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 408.020000] sdhci 0000:05:03.1: resuming [ 408.036000] ACPI: PCI Interrupt 0000:05:03.1[B] -> GSI 20 (level, low) -> IRQ 22 [ 408.040000] pci 0000:05:03.2: resuming [ 408.040000] pci 0000:05:03.3: resuming [ 408.040000] pci 0000:05:03.4: resuming [ 408.040000] pci 0000:05:04.0: resuming [ 408.040000] PM: Writing back config space on device 0000:05:04.0 at offset 1 (was 2900007, writing 2900003) [ 408.040000] pnp 00:00: resuming [ 408.040000] system 00:01: resuming [ 408.040000] pnp 00:02: resuming [ 408.040000] pnp 00:03: resuming [ 408.040000] i8042 kbd 00:04: resuming [ 408.040000] pnp: Failed to activate device 00:04. [ 408.040000] i8042 aux 00:05: resuming [ 408.040000] pnp: Failed to activate device 00:05. [ 408.040000] pnp 00:06: resuming [ 408.040000] pnp 00:07: resuming [ 408.040000] system 00:08: resuming [ 408.040000] system 00:09: resuming [ 408.040000] system 00:0a: resuming [ 408.040000] system 00:0b: resuming [ 408.040000] system 00:0c: resuming [ 408.040000] system 00:0d: resuming [ 408.040000] pcspkr pcspkr: resuming [ 408.040000] pci_express 0000:00:1c.0:pcie00: resuming [ 408.040000] pci_express 0000:00:1c.0:pcie02: resuming [ 408.040000] pci_express 0000:00:1c.1:pcie00: resuming [ 408.040000] pci_express 0000:00:1c.1:pcie02: resuming [ 408.040000] serial8250 serial8250: resuming [ 408.040000] i8042 i8042: resuming [ 408.044000] atkbd serio0: resuming [ 408.084000] platform eisa.0: resuming [ 408.084000] serio serio1: resuming [ 408.084000] serio serio2: resuming [ 408.084000] serio serio3: resuming [ 408.084000] psmouse serio4: resuming [ 408.648000] platform vesafb.0: resuming [ 408.648000] sd 0:0:0:0: resuming [ 408.648000] sr 0:0:1:0: resuming [ 408.648000] usb usb1: resuming [ 408.688000] usb usb2: resuming [ 408.728000] usb usb3: resuming [ 408.768000] hub 3-0:1.0: resuming [ 408.768000] usb usb4: resuming [ 408.808000] usb usb5: resuming [ 408.828000] usb 3-2: resuming [ 408.828000] usbdev3.2_ep00: PM: resume from 0, parent 3-2 still 1 [ 408.828000] hci_usb 3-2:1.0: PM: resume from 1, parent 3-2 still 1 [ 408.828000] hci_usb 3-2:1.0: resuming [ 408.828000] usbdev3.2_ep81: PM: resume from 0, parent 3-2:1.0 still 1 [ 408.828000] usbdev3.2_ep02: PM: resume from 0, parent 3-2:1.0 still 1 [ 408.828000] usbdev3.2_ep82: PM: resume from 0, parent 3-2:1.0 still 1 [ 408.828000] hci_usb 3-2:1.1: PM: resume from 1, parent 3-2 still 1 [ 408.828000] hci_usb 3-2:1.1: resuming [ 408.828000] iTCO_wdt iTCO_wdt: resuming [ 408.828000] platform bluetooth: resuming [ 408.828000] usbdev3.2_ep03: PM: resume from 0, parent 3-2:1.1 still 1 [ 408.828000] usbdev3.2_ep83: PM: resume from 0, parent 3-2:1.1 still 1 [ 408.828000] hci0: PM: resume from 0, parent 3-2:1.0 still 1 [ 408.828000] Restarting tasks ... <6>usb 3-2: USB disconnect, address 2 [ 408.876000] done. [ 408.876000] Enabling non-boot CPUs ... [ 408.892000] SMP alternatives: switching to SMP code [ 408.892000] Booting processor 1/1 eip 3000 [ 408.900000] Initializing CPU#1 [ 408.984000] Calibrating delay using timer specific routine.. 3325.27 BogoMIPS (lpj=6650557) [ 408.984000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 [ 408.984000] monitor/mwait feature present. [ 408.984000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 408.984000] CPU: L2 cache: 2048K [ 408.984000] CPU: Physical Processor ID: 0 [ 408.984000] CPU: Processor Core ID: 1 [ 408.984000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 [ 408.984000] CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 [ 408.988000] CPU1 is up [ 409.340000] ata1.00: configured for UDMA/33 [ 409.524000] ata1.01: configured for UDMA/33 [ 409.540000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 409.556000] sda: Write Protect is off [ 409.556000] sda: Mode Sense: 00 3a 00 00 [ 409.588000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 409.620000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 409.636000] sda: Write Protect is off [ 409.636000] sda: Mode Sense: 00 3a 00 00 [ 409.660000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 409.768000] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 410.016000] usb 3-2: configuration #1 chosen from 1 choice [ 413.836000] 8139too Fast Ethernet driver 0.9.28 [ 413.836000] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 20 (level, low) -> IRQ 22 [ 413.836000] eth0: RealTek RTL8139 at 0xe025e400, 00:18:f3:83:34:a9, IRQ 22 [ 413.836000] eth0: Identified 8139 chip type 'RTL-8101' [ 413.928000] ieee80211_crypt: registered algorithm 'NULL' [ 413.944000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 413.944000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 414.104000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp [ 414.104000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 414.104000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 414.104000] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 414.104000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 414.408000] eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 415.684000] input: Power Button (FF) as /class/input/input8 [ 415.684000] ACPI: Power Button (FF) [PWRF] [ 415.684000] input: Lid Switch as /class/input/input9 [ 415.684000] ACPI: Lid Switch [LID] [ 415.684000] input: Sleep Button (CM) as /class/input/input10 [ 415.684000] ACPI: Sleep Button (CM) [SLPB] [ 415.684000] input: Power Button (CM) as /class/input/input11 [ 415.684000] ACPI: Power Button (CM) [PWRB] [ 415.720000] ACPI: Transitioning device [FN00] to D3 [ 415.720000] ACPI: Transitioning device [FN00] to D3 [ 415.720000] ACPI: Fan [FN00] (off) [ 416.088000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 416.320000] ACPI: Thermal Zone [THRM] (56 C) [ 416.364000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 416.376000] ACPI: AC Adapter [AC0] (off-line) [ 416.404000] ACPI: Battery Slot [BAT0] (battery present) [ 429.780000] eth0: no IPv6 routers present [ 484.076000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 484.076000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 484.076000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 491.080000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 514.100000] ata1: port failed to respond (30 secs, Status 0xd0) [ 514.100000] ata1: soft resetting port [ 514.452000] ata1.00: configured for UDMA/33 [ 514.640000] ata1.01: configured for UDMA/33 [ 514.640000] ata1: EH complete [ 514.656000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 514.672000] sda: Write Protect is off [ 514.672000] sda: Mode Sense: 00 3a 00 00 [ 514.704000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 514.728000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 514.728000] sda: Write Protect is off [ 514.728000] sda: Mode Sense: 00 3a 00 00 [ 515.124000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 786.352000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 786.352000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 786.352000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 793.356000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 816.372000] ata1: port failed to respond (30 secs, Status 0xd0) [ 816.372000] ata1: soft resetting port [ 816.736000] ata1.00: configured for UDMA/33 [ 816.928000] ata1.01: configured for UDMA/33 [ 816.928000] ata1: EH complete [ 816.952000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 816.964000] sda: Write Protect is off [ 816.964000] sda: Mode Sense: 00 3a 00 00 [ 816.964000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 816.964000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 816.964000] sda: Write Protect is off [ 816.964000] sda: Mode Sense: 00 3a 00 00 [ 816.964000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1039.816000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 1039.816000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 1039.816000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 1046.820000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 1069.848000] ata1: port failed to respond (30 secs, Status 0xd0) [ 1069.848000] ata1: soft resetting port [ 1070.200000] ata1.00: configured for UDMA/33 [ 1070.384000] ata1.01: configured for UDMA/33 [ 1070.384000] ata1: EH complete [ 1070.400000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1070.408000] sda: Write Protect is off [ 1070.408000] sda: Mode Sense: 00 3a 00 00 [ 1070.408000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1070.408000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1070.408000] sda: Write Protect is off [ 1070.408000] sda: Mode Sense: 00 3a 00 00 [ 1070.408000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1257.900000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 1257.900000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 1257.900000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 1264.904000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 1287.928000] ata1: port failed to respond (30 secs, Status 0xd0) [ 1287.928000] ata1: soft resetting port [ 1288.280000] ata1.00: configured for UDMA/33 [ 1288.460000] ata1.01: configured for UDMA/33 [ 1288.460000] ata1: EH complete [ 1288.476000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1288.492000] sda: Write Protect is off [ 1288.492000] sda: Mode Sense: 00 3a 00 00 [ 1288.524000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1288.548000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1288.548000] sda: Write Protect is off [ 1288.548000] sda: Mode Sense: 00 3a 00 00 [ 1288.548000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1516.044000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 1516.044000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 1516.044000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 1523.048000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 1546.064000] ata1: port failed to respond (30 secs, Status 0xd0) [ 1546.064000] ata1: soft resetting port [ 1546.420000] ata1.00: configured for UDMA/33 [ 1546.604000] ata1.01: configured for UDMA/33 [ 1546.604000] ata1: EH complete [ 1546.632000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1546.656000] sda: Write Protect is off [ 1546.656000] sda: Mode Sense: 00 3a 00 00 [ 1546.704000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1546.732000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1546.736000] sda: Write Protect is off [ 1546.736000] sda: Mode Sense: 00 3a 00 00 [ 1546.736000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1625.004000] ata1.01: limiting speed to UDMA/25:PIO4 [ 1625.004000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 1625.004000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in [ 1625.004000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 1632.008000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 1655.024000] ata1: port failed to respond (30 secs, Status 0xd0) [ 1655.024000] ata1: soft resetting port [ 1655.376000] ata1.00: configured for UDMA/33 [ 1655.556000] ata1.01: configured for UDMA/25 [ 1655.556000] ata1: EH complete [ 1655.572000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1655.588000] sda: Write Protect is off [ 1655.588000] sda: Mode Sense: 00 3a 00 00 [ 1655.620000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1655.628000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1655.628000] sda: Write Protect is off [ 1655.628000] sda: Mode Sense: 00 3a 00 00 [ 1655.632000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1767.552000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 1767.552000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 1767.552000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 1774.600000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 1797.560000] ata1: port failed to respond (30 secs, Status 0xd0) [ 1797.560000] ata1: soft resetting port [ 1797.912000] ata1.00: configured for UDMA/33 [ 1798.100000] ata1.01: configured for UDMA/25 [ 1798.100000] ata1: EH complete [ 1798.116000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1798.124000] sda: Write Protect is off [ 1798.124000] sda: Mode Sense: 00 3a 00 00 [ 1798.496000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1798.496000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1798.552000] sda: Write Protect is off [ 1798.552000] sda: Mode Sense: 00 3a 00 00 [ 1798.552000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1851.056000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 1851.056000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 1851.056000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 1858.060000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 1881.076000] ata1: port failed to respond (30 secs, Status 0xd0) [ 1881.076000] ata1: soft resetting port [ 1881.428000] ata1.00: configured for UDMA/33 [ 1881.608000] ata1.01: configured for UDMA/25 [ 1881.608000] ata1: EH complete [ 1881.624000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1881.640000] sda: Write Protect is off [ 1881.640000] sda: Mode Sense: 00 3a 00 00 [ 1881.672000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1881.696000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1881.696000] sda: Write Protect is off [ 1881.696000] sda: Mode Sense: 00 3a 00 00 [ 1881.696000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1946.652000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 1946.652000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in [ 1946.652000] res 50/00:00:00:00:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation) [ 1946.652000] ata1: soft resetting port [ 1947.004000] ata1.00: configured for UDMA/33 [ 1947.188000] ata1.01: configured for UDMA/25 [ 1947.188000] ata1: EH complete [ 1947.204000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1947.220000] sda: Write Protect is off [ 1947.220000] sda: Mode Sense: 00 3a 00 00 [ 1947.252000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1947.260000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 1947.260000] sda: Write Protect is off [ 1947.260000] sda: Mode Sense: 00 3a 00 00 [ 1947.260000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2006.736000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 2006.736000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 2006.736000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 2013.740000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 2036.756000] ata1: port failed to respond (30 secs, Status 0xd0) [ 2036.756000] ata1: soft resetting port [ 2037.112000] ata1.00: configured for UDMA/33 [ 2037.296000] ata1.01: configured for UDMA/25 [ 2037.296000] ata1: EH complete [ 2037.316000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2037.324000] sda: Write Protect is off [ 2037.324000] sda: Mode Sense: 00 3a 00 00 [ 2037.328000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2037.328000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2037.328000] sda: Write Protect is off [ 2037.328000] sda: Mode Sense: 00 3a 00 00 [ 2037.328000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2191.180000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 2191.180000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 2191.180000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 2198.184000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 2221.204000] ata1: port failed to respond (30 secs, Status 0xd0) [ 2221.204000] ata1: soft resetting port [ 2221.556000] ata1.00: configured for UDMA/33 [ 2221.736000] ata1.01: configured for UDMA/25 [ 2221.736000] ata1: EH complete [ 2221.752000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2221.760000] sda: Write Protect is off [ 2221.760000] sda: Mode Sense: 00 3a 00 00 [ 2221.760000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2221.760000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2221.760000] sda: Write Protect is off [ 2221.760000] sda: Mode Sense: 00 3a 00 00 [ 2221.760000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2280.928000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 2280.928000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 2280.928000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 2287.932000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 2310.952000] ata1: port failed to respond (30 secs, Status 0xd0) [ 2310.952000] ata1: soft resetting port [ 2311.304000] ata1.00: configured for UDMA/33 [ 2311.484000] ata1.01: configured for UDMA/25 [ 2311.484000] ata1: EH complete [ 2311.500000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2311.516000] sda: Write Protect is off [ 2311.516000] sda: Mode Sense: 00 3a 00 00 [ 2311.548000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2311.572000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2311.572000] sda: Write Protect is off [ 2311.572000] sda: Mode Sense: 00 3a 00 00 [ 2311.572000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2400.472000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 2400.472000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 2400.472000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 2407.476000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 2430.492000] ata1: port failed to respond (30 secs, Status 0xd0) [ 2430.492000] ata1: soft resetting port [ 2430.864000] ata1.00: configured for UDMA/33 [ 2431.052000] ata1.01: configured for UDMA/25 [ 2431.052000] ata1: EH complete [ 2431.076000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2431.088000] sda: Write Protect is off [ 2431.088000] sda: Mode Sense: 00 3a 00 00 [ 2431.088000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2431.088000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2431.088000] sda: Write Protect is off [ 2431.088000] sda: Mode Sense: 00 3a 00 00 [ 2431.088000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2491.324000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 2491.324000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 [ 2491.324000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 2498.328000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 2521.352000] ata1: port failed to respond (30 secs, Status 0xd0) [ 2521.352000] ata1: soft resetting port [ 2521.712000] ata1.00: configured for UDMA/33 [ 2521.892000] ata1.01: configured for UDMA/25 [ 2521.892000] ata1: EH complete [ 2521.900000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2521.900000] sda: Write Protect is off [ 2521.900000] sda: Mode Sense: 00 3a 00 00 [ 2521.900000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2521.900000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2521.900000] sda: Write Protect is off [ 2521.900000] sda: Mode Sense: 00 3a 00 00 [ 2521.900000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2610.704000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 2610.704000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 2610.704000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 2617.708000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 2640.724000] ata1: port failed to respond (30 secs, Status 0xd0) [ 2640.724000] ata1: soft resetting port [ 2641.104000] ata1.00: configured for UDMA/33 [ 2641.296000] ata1.01: configured for UDMA/25 [ 2641.296000] ata1: EH complete [ 2641.320000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2641.344000] sda: Write Protect is off [ 2641.344000] sda: Mode Sense: 00 3a 00 00 [ 2641.392000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2641.428000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2641.428000] sda: Write Protect is off [ 2641.428000] sda: Mode Sense: 00 3a 00 00 [ 2641.428000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2799.264000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 2799.264000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 2799.264000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 2806.268000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 2829.284000] ata1: port failed to respond (30 secs, Status 0xd0) [ 2829.284000] ata1: soft resetting port [ 2829.644000] ata1.00: configured for UDMA/33 [ 2829.828000] ata1.01: configured for UDMA/25 [ 2829.828000] ata1: EH complete [ 2829.844000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2829.852000] sda: Write Protect is off [ 2829.852000] sda: Mode Sense: 00 3a 00 00 [ 2829.852000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2829.852000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 2829.852000] sda: Write Protect is off [ 2829.852000] sda: Mode Sense: 00 3a 00 00 [ 2829.856000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3151.432000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 3151.432000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 3151.432000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 3158.436000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 3181.456000] ata1: port failed to respond (30 secs, Status 0xd0) [ 3181.456000] ata1: soft resetting port [ 3181.808000] ata1.00: configured for UDMA/33 [ 3181.992000] ata1.01: configured for UDMA/25 [ 3181.992000] ata1: EH complete [ 3182.012000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 3182.020000] sda: Write Protect is off [ 3182.020000] sda: Mode Sense: 00 3a 00 00 [ 3182.024000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3182.024000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 3182.024000] sda: Write Protect is off [ 3182.024000] sda: Mode Sense: 00 3a 00 00 [ 3182.024000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3226.888000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 3226.888000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 3226.888000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 3233.892000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 3256.916000] ata1: port failed to respond (30 secs, Status 0xd0) [ 3256.916000] ata1: soft resetting port [ 3257.276000] ata1.00: configured for UDMA/33 [ 3257.464000] ata1.01: configured for UDMA/25 [ 3257.464000] ata1: EH complete [ 3257.484000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 3257.500000] sda: Write Protect is off [ 3257.500000] sda: Mode Sense: 00 3a 00 00 [ 3257.540000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3257.568000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 3257.568000] sda: Write Protect is off [ 3257.568000] sda: Mode Sense: 00 3a 00 00 [ 3257.572000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3289.620000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 3289.620000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 3289.620000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 3296.624000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 3319.640000] ata1: port failed to respond (30 secs, Status 0xd0) [ 3319.640000] ata1: soft resetting port [ 3320.000000] ata1.00: configured for UDMA/33 [ 3320.184000] ata1.01: configured for UDMA/25 [ 3320.184000] ata1: EH complete [ 3320.200000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 3320.216000] sda: Write Protect is off [ 3320.216000] sda: Mode Sense: 00 3a 00 00 [ 3320.248000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3320.272000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 3320.272000] sda: Write Protect is off [ 3320.272000] sda: Mode Sense: 00 3a 00 00 [ 3320.276000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3822.784000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 3822.784000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in [ 3822.784000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 3829.788000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 3852.804000] ata1: port failed to respond (30 secs, Status 0xd0) [ 3852.804000] ata1: soft resetting port [ 3853.160000] ata1.00: configured for UDMA/33 [ 3853.344000] ata1.01: configured for UDMA/25 [ 3853.344000] ata1: EH complete [ 3853.364000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 3853.384000] sda: Write Protect is off [ 3853.384000] sda: Mode Sense: 00 3a 00 00 [ 3853.424000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3853.436000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 3853.436000] sda: Write Protect is off [ 3853.436000] sda: Mode Sense: 00 3a 00 00 [ 3853.436000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3971.688000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 3971.688000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 3971.688000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 3978.692000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 4001.712000] ata1: port failed to respond (30 secs, Status 0xd0) [ 4001.712000] ata1: soft resetting port [ 4002.064000] ata1.00: configured for UDMA/33 [ 4002.244000] ata1.01: configured for UDMA/25 [ 4002.244000] ata1: EH complete [ 4002.260000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4002.268000] sda: Write Protect is off [ 4002.268000] sda: Mode Sense: 00 3a 00 00 [ 4002.268000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4002.268000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4002.268000] sda: Write Protect is off [ 4002.268000] sda: Mode Sense: 00 3a 00 00 [ 4002.268000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4050.980000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 4050.980000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 4050.980000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 4057.984000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 4081.000000] ata1: port failed to respond (30 secs, Status 0xd0) [ 4081.000000] ata1: soft resetting port [ 4081.352000] ata1.00: configured for UDMA/33 [ 4081.536000] ata1.01: configured for UDMA/25 [ 4081.536000] ata1: EH complete [ 4081.552000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4081.568000] sda: Write Protect is off [ 4081.568000] sda: Mode Sense: 00 3a 00 00 [ 4081.600000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4081.624000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4081.624000] sda: Write Protect is off [ 4081.624000] sda: Mode Sense: 00 3a 00 00 [ 4081.624000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4115.744000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 4115.744000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 4115.744000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 4122.748000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 4145.768000] ata1: port failed to respond (30 secs, Status 0xd0) [ 4145.768000] ata1: soft resetting port [ 4146.120000] ata1.00: configured for UDMA/33 [ 4146.300000] ata1.01: configured for UDMA/25 [ 4146.300000] ata1: EH complete [ 4146.308000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4146.324000] sda: Write Protect is off [ 4146.324000] sda: Mode Sense: 00 3a 00 00 [ 4146.356000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4146.380000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4146.380000] sda: Write Protect is off [ 4146.380000] sda: Mode Sense: 00 3a 00 00 [ 4146.380000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4218.084000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 4218.084000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in [ 4218.084000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 4225.128000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 4248.088000] ata1: port failed to respond (30 secs, Status 0xd0) [ 4248.088000] ata1: soft resetting port [ 4248.448000] ata1.00: configured for UDMA/33 [ 4248.628000] ata1.01: configured for UDMA/25 [ 4248.628000] ata1: EH complete [ 4248.644000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4248.660000] sda: Write Protect is off [ 4248.660000] sda: Mode Sense: 00 3a 00 00 [ 4248.692000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4248.700000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4248.700000] sda: Write Protect is off [ 4248.700000] sda: Mode Sense: 00 3a 00 00 [ 4248.700000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4772.036000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 4772.036000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 4772.036000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 4779.048000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 4802.064000] ata1: port failed to respond (30 secs, Status 0xd0) [ 4802.064000] ata1: soft resetting port [ 4802.416000] ata1.00: configured for UDMA/33 [ 4802.600000] ata1.01: configured for UDMA/25 [ 4802.600000] ata1: EH complete [ 4802.616000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4802.624000] sda: Write Protect is off [ 4802.624000] sda: Mode Sense: 00 3a 00 00 [ 4802.624000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4802.624000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4802.624000] sda: Write Protect is off [ 4802.624000] sda: Mode Sense: 00 3a 00 00 [ 4802.628000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4962.648000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 4962.648000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 4962.648000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 4969.652000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 4992.672000] ata1: port failed to respond (30 secs, Status 0xd0) [ 4992.672000] ata1: soft resetting port [ 4993.032000] ata1.00: configured for UDMA/33 [ 4993.212000] ata1.01: configured for UDMA/25 [ 4993.212000] ata1: EH complete [ 4993.228000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4993.236000] sda: Write Protect is off [ 4993.236000] sda: Mode Sense: 00 3a 00 00 [ 4993.236000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4993.236000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4993.236000] sda: Write Protect is off [ 4993.236000] sda: Mode Sense: 00 3a 00 00 [ 4993.236000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5241.308000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 5241.308000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 5241.308000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 5248.312000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 5271.328000] ata1: port failed to respond (30 secs, Status 0xd0) [ 5271.328000] ata1: soft resetting port [ 5271.684000] ata1.00: configured for UDMA/33 [ 5271.872000] ata1.01: configured for UDMA/25 [ 5271.872000] ata1: EH complete [ 5271.900000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 5271.912000] sda: Write Protect is off [ 5271.912000] sda: Mode Sense: 00 3a 00 00 [ 5271.912000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5271.912000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 5271.912000] sda: Write Protect is off [ 5271.912000] sda: Mode Sense: 00 3a 00 00 [ 5271.912000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6046.748000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 6046.748000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 6046.748000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 6053.768000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 6076.784000] ata1: port failed to respond (30 secs, Status 0xd0) [ 6076.784000] ata1: soft resetting port [ 6077.140000] ata1.00: configured for UDMA/33 [ 6077.324000] ata1.01: configured for UDMA/25 [ 6077.324000] ata1: EH complete [ 6077.352000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 6077.372000] sda: Write Protect is off [ 6077.376000] sda: Mode Sense: 00 3a 00 00 [ 6077.424000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6077.460000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 6077.460000] sda: Write Protect is off [ 6077.460000] sda: Mode Sense: 00 3a 00 00 [ 6077.460000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6275.256000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 6275.256000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 6275.256000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 6282.264000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 6305.280000] ata1: port failed to respond (30 secs, Status 0xd0) [ 6305.280000] ata1: soft resetting port [ 6305.644000] ata1.00: configured for UDMA/33 [ 6305.824000] ata1.01: configured for UDMA/25 [ 6305.824000] ata1: EH complete [ 6305.840000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 6305.848000] sda: Write Protect is off [ 6305.848000] sda: Mode Sense: 00 3a 00 00 [ 6305.848000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6305.848000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 6305.848000] sda: Write Protect is off [ 6305.848000] sda: Mode Sense: 00 3a 00 00 [ 6305.856000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6344.200000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 6344.200000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 6344.200000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 6351.204000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 6374.228000] ata1: port failed to respond (30 secs, Status 0xd0) [ 6374.228000] ata1: soft resetting port [ 6374.580000] ata1.00: configured for UDMA/33 [ 6374.764000] ata1.01: configured for UDMA/25 [ 6374.764000] ata1: EH complete [ 6374.780000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 6374.788000] sda: Write Protect is off [ 6374.788000] sda: Mode Sense: 00 3a 00 00 [ 6374.788000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6374.788000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 6374.788000] sda: Write Protect is off [ 6374.788000] sda: Mode Sense: 00 3a 00 00 [ 6374.788000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6442.424000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 6442.424000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in [ 6442.424000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 6449.428000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 6472.444000] ata1: port failed to respond (30 secs, Status 0xd0) [ 6472.444000] ata1: soft resetting port [ 6472.796000] ata1.00: configured for UDMA/33 [ 6472.976000] ata1.01: configured for UDMA/25 [ 6472.976000] ata1: EH complete [ 6472.992000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 6473.008000] sda: Write Protect is off [ 6473.008000] sda: Mode Sense: 00 3a 00 00 [ 6473.032000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6473.032000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 6473.032000] sda: Write Protect is off [ 6473.032000] sda: Mode Sense: 00 3a 00 00 [ 6473.032000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6826.708000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 6826.708000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 6826.708000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 6833.712000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 6856.728000] ata1: port failed to respond (30 secs, Status 0xd0) [ 6856.728000] ata1: soft resetting port [ 6857.104000] ata1.00: configured for UDMA/33 [ 6857.296000] ata1.01: configured for UDMA/25 [ 6857.296000] ata1: EH complete [ 6857.320000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 6857.344000] sda: Write Protect is off [ 6857.344000] sda: Mode Sense: 00 3a 00 00 [ 6857.392000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6857.428000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 6857.428000] sda: Write Protect is off [ 6857.428000] sda: Mode Sense: 00 3a 00 00 [ 6857.428000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7053.272000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 7053.272000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 7053.272000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 7060.276000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 7083.296000] ata1: port failed to respond (30 secs, Status 0xd0) [ 7083.296000] ata1: soft resetting port [ 7083.648000] ata1.00: configured for UDMA/33 [ 7083.828000] ata1.01: configured for UDMA/25 [ 7083.828000] ata1: EH complete [ 7083.844000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 7083.852000] sda: Write Protect is off [ 7083.852000] sda: Mode Sense: 00 3a 00 00 [ 7083.852000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7083.852000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 7083.852000] sda: Write Protect is off [ 7083.852000] sda: Mode Sense: 00 3a 00 00 [ 7083.852000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7147.180000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 7147.180000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 7147.180000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 7154.184000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 7177.204000] ata1: port failed to respond (30 secs, Status 0xd0) [ 7177.204000] ata1: soft resetting port [ 7177.556000] ata1.00: configured for UDMA/33 [ 7177.736000] ata1.01: configured for UDMA/25 [ 7177.736000] ata1: EH complete [ 7177.752000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 7177.768000] sda: Write Protect is off [ 7177.768000] sda: Mode Sense: 00 3a 00 00 [ 7177.800000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7177.824000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 7177.824000] sda: Write Protect is off [ 7177.824000] sda: Mode Sense: 00 3a 00 00 [ 7177.824000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7258.100000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 7258.100000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 7258.100000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 7265.104000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 7288.120000] ata1: port failed to respond (30 secs, Status 0xd0) [ 7288.120000] ata1: soft resetting port [ 7288.484000] ata1.00: configured for UDMA/33 [ 7288.668000] ata1.01: configured for UDMA/25 [ 7288.668000] ata1: EH complete [ 7288.688000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 7288.704000] sda: Write Protect is off [ 7288.704000] sda: Mode Sense: 00 3a 00 00 [ 7288.740000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7288.764000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 7288.764000] sda: Write Protect is off [ 7288.764000] sda: Mode Sense: 00 3a 00 00 [ 7288.768000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7821.104000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 7821.104000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 7821.104000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 7828.112000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 7851.128000] ata1: port failed to respond (30 secs, Status 0xd0) [ 7851.128000] ata1: soft resetting port [ 7851.480000] ata1.00: configured for UDMA/33 [ 7851.664000] ata1.01: configured for UDMA/25 [ 7851.664000] ata1: EH complete [ 7851.680000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 7851.696000] sda: Write Protect is off [ 7851.696000] sda: Mode Sense: 00 3a 00 00 [ 7851.728000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7851.752000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 7851.756000] sda: Write Protect is off [ 7851.756000] sda: Mode Sense: 00 3a 00 00 [ 7852.144000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7888.020000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 7888.020000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 7888.020000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 7895.024000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 7918.044000] ata1: port failed to respond (30 secs, Status 0xd0) [ 7918.044000] ata1: soft resetting port [ 7918.396000] ata1.00: configured for UDMA/33 [ 7918.576000] ata1.01: configured for UDMA/25 [ 7918.576000] ata1: EH complete [ 7918.592000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 7918.608000] sda: Write Protect is off [ 7918.608000] sda: Mode Sense: 00 3a 00 00 [ 7918.640000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7918.664000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 7918.664000] sda: Write Protect is off [ 7918.664000] sda: Mode Sense: 00 3a 00 00 [ 7918.664000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8106.252000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 8106.252000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 8106.252000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 8113.256000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 8136.272000] ata1: port failed to respond (30 secs, Status 0xd0) [ 8136.272000] ata1: soft resetting port [ 8136.624000] ata1.00: configured for UDMA/33 [ 8136.804000] ata1.01: configured for UDMA/25 [ 8136.804000] ata1: EH complete [ 8136.820000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8136.836000] sda: Write Protect is off [ 8136.836000] sda: Mode Sense: 00 3a 00 00 [ 8136.868000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8136.892000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8136.892000] sda: Write Protect is off [ 8136.892000] sda: Mode Sense: 00 3a 00 00 [ 8136.892000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8177.380000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 8177.380000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 8177.380000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 8184.396000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 8207.412000] ata1: port failed to respond (30 secs, Status 0xd0) [ 8207.412000] ata1: soft resetting port [ 8207.764000] ata1.00: configured for UDMA/33 [ 8207.948000] ata1.01: configured for UDMA/25 [ 8207.948000] ata1: EH complete [ 8207.964000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8207.972000] sda: Write Protect is off [ 8207.972000] sda: Mode Sense: 00 3a 00 00 [ 8207.972000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8207.972000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8207.972000] sda: Write Protect is off [ 8207.972000] sda: Mode Sense: 00 3a 00 00 [ 8207.976000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8336.756000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 8336.756000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 8336.756000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 8343.760000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 8366.776000] ata1: port failed to respond (30 secs, Status 0xd0) [ 8366.776000] ata1: soft resetting port [ 8367.128000] ata1.00: configured for UDMA/33 [ 8367.308000] ata1.01: configured for UDMA/25 [ 8367.308000] ata1: EH complete [ 8367.324000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8367.332000] sda: Write Protect is off [ 8367.332000] sda: Mode Sense: 00 3a 00 00 [ 8367.332000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8367.336000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8367.336000] sda: Write Protect is off [ 8367.336000] sda: Mode Sense: 00 3a 00 00 [ 8367.336000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8573.712000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 8573.712000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 8573.712000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 8580.716000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 8603.732000] ata1: port failed to respond (30 secs, Status 0xd0) [ 8603.732000] ata1: soft resetting port [ 8604.096000] ata1.00: configured for UDMA/33 [ 8604.280000] ata1.01: configured for UDMA/25 [ 8604.280000] ata1: EH complete [ 8604.300000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8604.316000] sda: Write Protect is off [ 8604.316000] sda: Mode Sense: 00 3a 00 00 [ 8604.352000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8604.376000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8604.376000] sda: Write Protect is off [ 8604.376000] sda: Mode Sense: 00 3a 00 00 [ 8604.380000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8647.076000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 8647.076000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x43 data 12 in [ 8647.076000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 8654.080000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 8677.096000] ata1: port failed to respond (30 secs, Status 0xd0) [ 8677.096000] ata1: soft resetting port [ 8677.452000] ata1.00: configured for UDMA/33 [ 8677.636000] ata1.01: configured for UDMA/25 [ 8677.636000] ata1: EH complete [ 8677.664000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8677.688000] sda: Write Protect is off [ 8677.688000] sda: Mode Sense: 00 3a 00 00 [ 8677.720000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8677.748000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8677.752000] sda: Write Protect is off [ 8677.752000] sda: Mode Sense: 00 3a 00 00 [ 8677.752000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8764.284000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 8764.284000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 8764.284000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 8771.340000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 8794.300000] ata1: port failed to respond (30 secs, Status 0xd0) [ 8794.300000] ata1: soft resetting port [ 8794.652000] ata1.00: configured for UDMA/33 [ 8794.836000] ata1.01: configured for UDMA/25 [ 8794.836000] ata1: EH complete [ 8794.852000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8794.860000] sda: Write Protect is off [ 8794.860000] sda: Mode Sense: 00 3a 00 00 [ 8794.860000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8794.860000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8794.860000] sda: Write Protect is off [ 8794.860000] sda: Mode Sense: 00 3a 00 00 [ 8794.864000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8853.312000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 8853.312000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0 [ 8853.312000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 8860.316000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 8883.332000] ata1: port failed to respond (30 secs, Status 0xd0) [ 8883.332000] ata1: soft resetting port [ 8883.684000] ata1.00: configured for UDMA/33 [ 8883.864000] ata1.01: configured for UDMA/25 [ 8883.864000] ata1: EH complete [ 8883.872000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8883.872000] sda: Write Protect is off [ 8883.872000] sda: Mode Sense: 00 3a 00 00 [ 8883.872000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8883.876000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 8883.876000] sda: Write Protect is off [ 8883.876000] sda: Mode Sense: 00 3a 00 00 [ 8883.876000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9222.236000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 9222.236000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 9222.236000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout) [ 9229.240000] ata1: port is slow to respond, please be patient (Status 0xd0) [ 9252.260000] ata1: port failed to respond (30 secs, Status 0xd0) [ 9252.260000] ata1: soft resetting port [ 9252.612000] ata1.00: configured for UDMA/33 [ 9252.796000] ata1.01: configured for UDMA/25 [ 9252.796000] ata1: EH complete [ 9252.812000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 9252.820000] sda: Write Protect is off [ 9252.820000] sda: Mode Sense: 00 3a 00 00 [ 9252.820000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9252.824000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 9252.824000] sda: Write Protect is off [ 9252.824000] sda: Mode Sense: 00 3a 00 00 [ 9252.824000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9276.176000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 9276.176000] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in [ 9276.176000] res 50/00:00:00:00:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation) [ 9276.176000] ata1: soft resetting port [ 9276.552000] ata1.00: configured for UDMA/33 [ 9276.744000] ata1.01: configured for UDMA/25 [ 9276.744000] ata1: EH complete [ 9276.768000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 9276.792000] sda: Write Protect is off [ 9276.792000] sda: Mode Sense: 00 3a 00 00 [ 9276.828000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9276.828000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 9276.828000] sda: Write Protect is off [ 9276.828000] sda: Mode Sense: 00 3a 00 00 [ 9276.828000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA