[ 0.000000] Linux version 2.6.24-12-generic (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Mon Mar 10 14:33:08 UTC 2008 (Ubuntu 2.6.24-12.20-generic) [ 0.000000] Command line: root=/dev/mapper/crypt-root ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) [ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffe5600 (reserved) [ 0.000000] BIOS-e820: 000000007ffe5600 - 000000007fff8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff8000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524240) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F96A0 checksum 0 [ 0.000000] ACPI: RSDP 000F96A0, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT 7FFE57C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: FACP 7FFE5684, 00F4 (r4 HP 30A3 3 HP 1) [ 0.000000] ACPI: DSDT 7FFE5ACC, 102DE (r1 HP nc8430 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FFF7E80, 0040 [ 0.000000] ACPI: SLIC 7FFE5844, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: HPET 7FFE59BC, 0038 (r1 HP 30A3 1 HP 1) [ 0.000000] ACPI: APIC 7FFE59F4, 0068 (r1 HP 30A3 1 HP 1) [ 0.000000] ACPI: MCFG 7FFE5A5C, 003C (r1 HP 30A3 1 HP 1) [ 0.000000] ACPI: TCPA 7FFE5A98, 0032 (r2 HP 30A3 1 HP 1) [ 0.000000] ACPI: SSDT 7FFF5DAA, 0059 (r1 HP HPQNLP 1 MSFT 100000E) [ 0.000000] ACPI: SSDT 7FFF5E03, 0326 (r1 HP HPQSAT 1 MSFT 100000E) [ 0.000000] ACPI: SSDT 7FFF697E, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT 7FFF6BDD, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT 7FFF6C83, 04D7 (r1 HP CpuPm 3000 INTL 20060317) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ffd0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524240) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffd0000 [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524240 [ 0.000000] On node 0 totalpages: 524143 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1208 pages reserved [ 0.000000] DMA zone: 2735 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 513033 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515768 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/crypt-root ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 11.102951] time.c: Detected 1994.998 MHz processor. [ 11.104900] Console: colour VGA+ 80x25 [ 11.104904] console [tty0] enabled [ 11.104922] Checking aperture... [ 11.104944] Calgary: detecting Calgary via BIOS EBDA area [ 11.104946] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 11.131068] Memory: 2054588k/2096960k available (2466k kernel code, 41984k reserved, 1310k data, 316k init) [ 11.131107] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 11.208878] Calibrating delay using timer specific routine.. 3994.32 BogoMIPS (lpj=7988656) [ 11.208913] Security Framework initialized [ 11.208921] SELinux: Disabled at boot. [ 11.208934] AppArmor: AppArmor initialized [ 11.208939] Failure registering capabilities with primary security module. [ 11.209155] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 11.210623] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 11.211430] Mount-cache hash table entries: 256 [ 11.211581] CPU: L1 I cache: 32K, L1 D cache: 32K [ 11.211584] CPU: L2 cache: 4096K [ 11.211587] CPU 0/0 -> Node 0 [ 11.211589] using mwait in idle threads. [ 11.211591] CPU: Physical Processor ID: 0 [ 11.211592] CPU: Processor Core ID: 0 [ 11.211599] CPU0: Thermal monitoring handled by SMI [ 11.211614] SMP alternatives: switching to UP code [ 11.212406] Early unpacking initramfs... done [ 11.585512] ACPI: Core revision 20070126 [ 11.585588] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 11.693557] Using local APIC timer interrupts. [ 11.743658] APIC timer calibration result 10390603 [ 11.743660] Detected 10.390 MHz APIC timer. [ 11.743739] SMP alternatives: switching to SMP code [ 11.744409] Booting processor 1/2 APIC 0x1 [ 11.754926] Initializing CPU#1 [ 11.831616] Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=7980080) [ 11.831623] CPU: L1 I cache: 32K, L1 D cache: 32K [ 11.831624] CPU: L2 cache: 4096K [ 11.831626] CPU 1/1 -> Node 0 [ 11.831628] CPU: Physical Processor ID: 0 [ 11.831629] CPU: Processor Core ID: 1 [ 11.831635] CPU1: Thermal monitoring enabled (TM2) [ 11.832145] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 11.832212] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 11.852227] Brought up 2 CPUs [ 11.852308] CPU0 attaching sched-domain: [ 11.852310] domain 0: span 03 [ 11.852312] groups: 01 02 [ 11.852314] domain 1: span 03 [ 11.852316] groups: 03 [ 11.852318] CPU1 attaching sched-domain: [ 11.852319] domain 0: span 03 [ 11.852320] groups: 02 01 [ 11.852322] domain 1: span 03 [ 11.852323] groups: 03 [ 11.852538] net_namespace: 120 bytes [ 11.852920] Time: 20:02:13 Date: 03/12/08 [ 11.852968] NET: Registered protocol family 16 [ 11.853147] ACPI: bus type pci registered [ 11.853216] PCI: Using configuration type 1 [ 11.854725] ACPI: EC: Look up EC in DSDT [ 11.856636] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 11.928654] ACPI: Interpreter enabled [ 11.928657] ACPI: (supports S0 S3 S4 S5) [ 11.928668] ACPI: Using IOAPIC for interrupt routing [ 11.939396] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 11.939398] ACPI: EC: driver started in interrupt mode [ 11.939455] ACPI: PCI Root Bridge [C002] (0000:00) [ 11.940215] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 11.940219] PCI quirk: region 1100-113f claimed by ICH6 GPIO [ 11.941647] PCI: Transparent bridge - 0000:00:1e.0 [ 11.941736] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] [ 11.942055] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C083._PRT] [ 11.942155] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT] [ 11.942288] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C103._PRT] [ 11.942417] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C113._PRT] [ 11.942550] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C119._PRT] [ 11.975400] ACPI: PCI Interrupt Link [C10F] (IRQs *10 11) [ 11.975611] ACPI: PCI Interrupt Link [C110] (IRQs *10 11) [ 11.975818] ACPI: PCI Interrupt Link [C111] (IRQs 10 *11) [ 11.976021] ACPI: PCI Interrupt Link [C112] (IRQs *10 11) [ 11.976225] ACPI: PCI Interrupt Link [C12B] (IRQs *10 11) [ 11.976428] ACPI: PCI Interrupt Link [C12C] (IRQs 10 *11) [ 11.976632] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11) [ 11.976728] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126] [ 11.977044] ACPI: Power Resource [C1F3] (on) [ 11.977218] ACPI: Power Resource [C200] (on) [ 11.977264] ACPI: Power Resource [C21D] (on) [ 11.977317] ACPI: Power Resource [C225] (off) [ 11.977422] ACPI: Power Resource [C323] (off) [ 11.977518] ACPI: Power Resource [C324] (off) [ 11.977613] ACPI: Power Resource [C325] (off) [ 11.977708] ACPI: Power Resource [C326] (off) [ 11.977802] ACPI: Power Resource [C327] (off) [ 11.977896] ACPI: Power Resource [C328] (off) [ 11.977939] ACPI: Power Resource [C329] (off) [ 11.977989] Linux Plug and Play Support v0.97 (c) Adam Belay [ 11.978018] pnp: PnP ACPI init [ 11.978024] ACPI: bus type pnp registered [ 11.987574] pnp: PnP ACPI: found 16 devices [ 11.987577] ACPI: ACPI bus type pnp unregistered [ 11.987785] PCI: Using ACPI for IRQ routing [ 11.987787] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 12.003537] NET: Registered protocol family 8 [ 12.003539] NET: Registered protocol family 20 [ 12.003569] PCI-GART: No AMD northbridge found. [ 12.003575] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 12.003578] hpet0: 3 64-bit timers, 14318180 Hz [ 12.004611] AppArmor: AppArmor Filesystem Enabled [ 12.007518] Time: tsc clocksource has been installed. [ 12.007527] Switched to high resolution mode on CPU 0 [ 12.008132] Switched to high resolution mode on CPU 1 [ 12.015501] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 12.015504] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 12.015506] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved [ 12.015515] system 00:0c: ioport range 0x500-0x55f has been reserved [ 12.015517] system 00:0c: ioport range 0x800-0x80f has been reserved [ 12.015520] system 00:0c: iomem range 0xffb00000-0xffbfffff could not be reserved [ 12.015523] system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved [ 12.015528] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved [ 12.015530] system 00:0e: ioport range 0x1000-0x107f has been reserved [ 12.015532] system 00:0e: ioport range 0x1100-0x113f has been reserved [ 12.015534] system 00:0e: ioport range 0x1200-0x121f has been reserved [ 12.015536] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved [ 12.015539] system 00:0e: iomem range 0xfec00000-0xfec000ff could not be reserved [ 12.015541] system 00:0e: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 12.015543] system 00:0e: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 12.015546] system 00:0e: iomem range 0xfed90000-0xfed9afff could not be reserved [ 12.015550] system 00:0f: iomem range 0xcfe00-0xcffff has been reserved [ 12.015552] system 00:0f: iomem range 0xfeda0000-0xfedbffff could not be reserved [ 12.015555] system 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved [ 12.015929] PCI: Bridge: 0000:00:01.0 [ 12.015932] IO window: 4000-4fff [ 12.015935] MEM window: f4600000-f46fffff [ 12.015938] PREFETCH window: e0000000-efffffff [ 12.015941] PCI: Bridge: 0000:00:1c.0 [ 12.015942] IO window: disabled. [ 12.015947] MEM window: f4100000-f41fffff [ 12.015951] PREFETCH window: disabled. [ 12.015956] PCI: Bridge: 0000:00:1c.1 [ 12.015957] IO window: disabled. [ 12.015962] MEM window: f4000000-f40fffff [ 12.015966] PREFETCH window: disabled. [ 12.015971] PCI: Bridge: 0000:00:1c.3 [ 12.015974] IO window: 2000-3fff [ 12.015979] MEM window: f0000000-f3ffffff [ 12.015983] PREFETCH window: disabled. [ 12.015991] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [ 12.015993] IO window: 00001400-000014ff [ 12.015998] IO window: 00001800-000018ff [ 12.016003] PREFETCH window: 88000000-8bffffff [ 12.016008] MEM window: 8c000000-8fffffff [ 12.016013] PCI: Bridge: 0000:00:1e.0 [ 12.016014] IO window: disabled. [ 12.016019] MEM window: f4200000-f45fffff [ 12.016023] PREFETCH window: disabled. [ 12.016038] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.016042] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 12.016064] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.016069] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.016091] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 12.016097] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 12.016119] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 12.016124] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 12.016137] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 12.016155] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 12.016168] NET: Registered protocol family 2 [ 12.051546] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 12.052188] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 12.054168] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 12.054949] TCP: Hash tables configured (established 262144 bind 65536) [ 12.054952] TCP reno registered [ 12.063602] checking if image is initramfs... it is [ 12.797007] Freeing initrd memory: 8270k freed [ 12.802302] audit: initializing netlink socket (disabled) [ 12.802324] audit(1205352134.580:1): initialized [ 12.804435] VFS: Disk quotas dquot_6.5.1 [ 12.804499] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 12.804614] io scheduler noop registered [ 12.804616] io scheduler anticipatory registered [ 12.804618] io scheduler deadline registered [ 12.804720] io scheduler cfq registered (default) [ 12.807020] Boot video device is 0000:01:00.0 [ 12.807180] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 12.807212] assign_interrupt_mode Found MSI capability [ 12.807240] Allocate Port Service[0000:00:01.0:pcie00] [ 12.807322] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.807377] assign_interrupt_mode Found MSI capability [ 12.807421] Allocate Port Service[0000:00:1c.0:pcie00] [ 12.807452] Allocate Port Service[0000:00:1c.0:pcie02] [ 12.807547] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 12.807602] assign_interrupt_mode Found MSI capability [ 12.807645] Allocate Port Service[0000:00:1c.1:pcie00] [ 12.807678] Allocate Port Service[0000:00:1c.1:pcie02] [ 12.807774] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 12.807829] assign_interrupt_mode Found MSI capability [ 12.807873] Allocate Port Service[0000:00:1c.3:pcie00] [ 12.807906] Allocate Port Service[0000:00:1c.3:pcie02] [ 12.831702] Real Time Clock Driver v1.12ac [ 12.831945] hpet_resources: 0xfed00000 is busy [ 12.832007] Linux agpgart interface v0.102 [ 12.832010] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.832160] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.832658] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.833456] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 12.833518] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 12.833613] PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12 [ 12.835442] i8042.c: Detected active multiplexing controller, rev 1.1. [ 12.836200] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.836204] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 12.836206] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 12.836208] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 12.836210] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 12.847102] mice: PS/2 mouse device common for all mice [ 12.847136] cpuidle: using governor ladder [ 12.847138] cpuidle: using governor menu [ 12.847261] NET: Registered protocol family 1 [ 12.847312] registered taskstats version 1 [ 12.847412] Magic number: 0:964:42 [ 12.847415] hash matches device ttyeb [ 12.847467] hash matches device 00:0e [ 12.847483] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 12.847486] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 12.847487] EDD information not available. [ 12.847494] Freeing unused kernel memory: 316k freed [ 12.884006] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 14.009515] fuse init (API version 7.9) [ 14.014058] ACPI: Transitioning device [C32A] to D3 [ 14.014060] ACPI: Transitioning device [C32A] to D3 [ 14.014063] ACPI: Fan [C32A] (off) [ 14.014248] ACPI: Transitioning device [C32B] to D3 [ 14.014249] ACPI: Transitioning device [C32B] to D3 [ 14.014252] ACPI: Fan [C32B] (off) [ 14.014435] ACPI: Transitioning device [C32C] to D3 [ 14.014436] ACPI: Transitioning device [C32C] to D3 [ 14.014439] ACPI: Fan [C32C] (off) [ 14.014620] ACPI: Transitioning device [C32D] to D3 [ 14.014622] ACPI: Transitioning device [C32D] to D3 [ 14.014624] ACPI: Fan [C32D] (off) [ 14.014805] ACPI: Transitioning device [C32E] to D3 [ 14.014806] ACPI: Transitioning device [C32E] to D3 [ 14.014809] ACPI: Fan [C32E] (off) [ 14.014990] ACPI: Transitioning device [C32F] to D3 [ 14.014991] ACPI: Transitioning device [C32F] to D3 [ 14.014994] ACPI: Fan [C32F] (off) [ 14.015073] ACPI: Transitioning device [C330] to D3 [ 14.015074] ACPI: Transitioning device [C330] to D3 [ 14.015077] ACPI: Fan [C330] (off) [ 14.019510] ACPI: SSDT 7FFF61F1, 023D (r1 HP Cpu0Ist 3000 INTL 20060317) [ 14.019721] ACPI: SSDT 7FFF64B3, 04CB (r1 HP Cpu0Cst 3001 INTL 20060317) [ 14.027691] Monitor-Mwait will be used to enter C-1 state [ 14.027694] Monitor-Mwait will be used to enter C-2 state [ 14.027785] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 14.027788] ACPI: Processor [CPU0] (supports 8 throttling states) [ 14.027977] ACPI: SSDT 7FFF6129, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) [ 14.028184] ACPI: SSDT 7FFF642E, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) [ 14.029239] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 14.029243] ACPI: Processor [CPU1] (supports 8 throttling states) [ 14.030269] Marking TSC unstable due to TSC halts in idle [ 14.031268] Time: hpet clocksource has been installed. [ 14.069679] ACPI: Thermal Zone [TZ0] (30 C) [ 14.093848] ACPI: Thermal Zone [TZ1] (32 C) [ 14.117293] ACPI: Thermal Zone [TZ2] (29 C) [ 14.127574] ACPI: Thermal Zone [TZ3] (25 C) [ 14.131209] ACPI: Thermal Zone [TZ4] (68 C) [ 14.143034] device-mapper: uevent: version 1.0.3 [ 14.143072] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 14.556873] usbcore: registered new interface driver usbfs [ 14.556896] usbcore: registered new interface driver hub [ 14.557426] tg3.c:v3.86 (November 9, 2007) [ 14.557457] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.557468] PCI: Setting latency timer of device 0000:08:00.0 to 64 [ 14.559269] usbcore: registered new device driver usb [ 14.568400] SCSI subsystem initialized [ 14.602338] eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:17:08:46:80:77 [ 14.602344] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 14.602346] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 14.602389] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 14.603345] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 14.603350] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 14.603566] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 14.607480] ehci_hcd 0000:00:1d.7: debug port 1 [ 14.607487] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 14.607496] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4704000 [ 14.611400] USB Universal Host Controller Interface driver v3.0 [ 14.622945] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.623054] usb usb1: configuration #1 chosen from 1 choice [ 14.623074] hub 1-0:1.0: USB hub found [ 14.623080] hub 1-0:1.0: 8 ports detected [ 14.629831] libata version 3.00 loaded. [ 14.727002] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 14.727017] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 14.727021] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.727042] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 14.727073] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000 [ 14.727168] usb usb2: configuration #1 chosen from 1 choice [ 14.727189] hub 2-0:1.0: USB hub found [ 14.727193] hub 2-0:1.0: 2 ports detected [ 14.829921] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 14.829931] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.829935] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.829955] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 14.829986] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00005020 [ 14.830077] usb usb3: configuration #1 chosen from 1 choice [ 14.830095] hub 3-0:1.0: USB hub found [ 14.830099] hub 3-0:1.0: 2 ports detected [ 14.933844] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 14.933855] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.933858] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.933877] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 14.933907] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040 [ 14.933999] usb usb4: configuration #1 chosen from 1 choice [ 14.934020] hub 4-0:1.0: USB hub found [ 14.934025] hub 4-0:1.0: 2 ports detected [ 15.037830] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 15.037846] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 15.037852] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 15.037891] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 15.037930] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060 [ 15.038038] usb usb5: configuration #1 chosen from 1 choice [ 15.038057] hub 5-0:1.0: USB hub found [ 15.038061] hub 5-0:1.0: 2 ports detected [ 15.142600] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.142635] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 15.142646] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 15.142671] ahci 0000:00:1f.2: version 3.0 [ 15.142694] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 15.143779] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports [ 15.143783] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf [ 15.445470] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 15.615774] usb 2-1: configuration #1 chosen from 1 choice [ 15.857216] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 16.020501] usb 3-1: configuration #1 chosen from 1 choice [ 16.145080] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 16.145086] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 16.145095] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 16.145416] scsi0 : ahci [ 16.145460] scsi1 : ahci [ 16.145494] scsi2 : ahci [ 16.145527] scsi3 : ahci [ 16.145582] ata1: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705100 irq 507 [ 16.145585] ata2: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705180 irq 507 [ 16.145588] ata3: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705200 irq 507 [ 16.145591] ata4: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705280 irq 507 [ 16.784661] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.787697] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 16.787700] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 16.787755] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 16.788499] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded [ 16.789967] ata1.00: ATA-7: ST980825AS, 3.12, max UDMA/100 [ 16.789971] ata1.00: 156301488 sectors, multi 16: LBA48 [ 16.793234] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 16.793236] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 16.793333] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 16.794094] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded [ 16.795587] ata1.00: configured for UDMA/100 [ 16.798855] ata1.00: configured for UDMA/100 [ 16.798859] ata1: EH complete [ 17.116460] ata2: SATA link down (SStatus 0 SControl 0) [ 17.436265] ata3: SATA link down (SStatus 0 SControl 0) [ 17.756070] ata4: SATA link down (SStatus 0 SControl 0) [ 17.756214] scsi 0:0:0:0: Direct-Access ATA ST980825AS 3.12 PQ: 0 ANSI: 5 [ 17.756352] ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 17.806494] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f4201000-f42017ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 17.806599] Driver 'sd' needs updating - please use bus_type methods [ 17.806651] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 17.806661] sd 0:0:0:0: [sda] Write Protect is off [ 17.806663] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.806677] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.806724] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 17.806733] sd 0:0:0:0: [sda] Write Protect is off [ 17.806735] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.806749] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.806752] sda:<7>ata_piix 0000:00:1f.1: version 2.12 [ 17.809324] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.809359] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 17.809759] scsi4 : ata_piix [ 17.810192] scsi5 : ata_piix [ 17.810639] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14 [ 17.810641] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15 [ 17.820854] sda1 sda2 sda3 [ 17.820986] sd 0:0:0:0: [sda] Attached SCSI disk [ 17.824628] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 18.128322] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PC05, max MWDMA2 [ 18.300148] ata5.00: configured for MWDMA2 [ 18.300213] ata6: port disabled. ignoring. [ 18.304114] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PC05 PQ: 0 ANSI: 5 [ 18.304229] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 18.310540] Driver 'sr' needs updating - please use bus_type methods [ 18.328767] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 18.328772] Uniform CD-ROM driver Revision: 3.20 [ 18.328847] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 28.184182] Attempting manual resume [ 28.184186] swsusp: Resume From Partition 254:2 [ 28.184187] PM: Checking swsusp image. [ 28.184437] PM: Resume from disk failed. [ 28.218983] kjournald starting. Commit interval 5 seconds [ 28.218991] EXT3-fs: mounted filesystem with ordered data mode. [ 35.901285] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 36.134884] tpm_inf_pnp 00:04: Found C202 with ID IFX0102 [ 36.134941] tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 36.186494] ACPI: AC Adapter [C1BC] (on-line) [ 36.290275] intel_rng: FWH not detected [ 36.350096] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 36.490110] parport_pc 00:03: reported by Plug and Play ACPI [ 36.490196] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 36.697969] input: Power Button (FF) as /devices/virtual/input/input3 [ 36.714313] ACPI: Battery Slot [C1BE] (battery present) [ 36.752491] ACPI: Power Button (FF) [PWRF] [ 36.755745] ACPI: Battery Slot [C1BD] (battery present) [ 36.756226] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 36.809513] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 36.816463] ACPI: Sleep Button (CM) [C246] [ 36.816516] input: Lid Switch as /devices/virtual/input/input5 [ 36.848539] ACPI: Lid Switch [C23E] [ 36.848653] ACPI: WMI-Acer: Mapper loaded [ 36.889808] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 36.929402] iTCO_vendor_support: vendor-support=0 [ 36.936383] ACPI: Video Device [C136] (multi-head: yes rom: no post: no) [ 36.965359] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 37.096303] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44793/0x300000 [ 37.096309] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 37.141192] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 37.197275] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 37.197311] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 37.272037] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a3] [ 37.272063] Yenta: Enabling burst memory read transactions [ 37.272068] Yenta: Using INTVAL to route CSC interrupts to PCI [ 37.272070] Yenta: Routing CardBus interrupts to PCI [ 37.272075] Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64 [ 37.318344] sdhci: Secure Digital Host Controller Interface driver [ 37.318347] sdhci: Copyright(c) Pierre Ossman [ 37.448258] Bluetooth: Core ver 2.11 [ 37.450617] NET: Registered protocol family 31 [ 37.450618] Bluetooth: HCI device and connection manager initialized [ 37.450622] Bluetooth: HCI socket layer initialized [ 37.501825] Yenta: ISA IRQ mask 0x0c78, PCI irq 18 [ 37.501831] Socket status: 30000006 [ 37.501833] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 37.501838] pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff [ 37.520162] ACPI: PCI Interrupt 0000:02:06.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 37.520231] sdhci: SDHCI controller found at 0000:02:06.3 [104c:803c] (rev 0) [ 37.520254] ACPI: PCI Interrupt 0000:02:06.3[C] -> GSI 22 (level, low) -> IRQ 22 [ 37.521255] mmc0: SDHCI at 0xf4209000 irq 22 PIO [ 37.529470] Bluetooth: HCI USB driver ver 2.9 [ 37.531724] usbcore: registered new interface driver hci_usb [ 37.833421] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 37.833426] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 37.833528] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 37.833543] PCI: Setting latency timer of device 0000:10:00.0 to 64 [ 37.834462] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 37.993085] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 37.994033] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 38.627292] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 38.627645] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 40.070245] loop: module loaded [ 40.080749] lp0: using parport0 (interrupt-driven). [ 40.219900] Adding 2097144k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1 across:2097144k [ 40.798439] EXT3 FS on dm-3, internal journal [ 41.970653] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input8 [ 42.149462] kjournald starting. Commit interval 5 seconds [ 42.157478] EXT3 FS on sda1, internal journal [ 42.157487] EXT3-fs: mounted filesystem with ordered data mode. [ 42.184951] kjournald starting. Commit interval 5 seconds [ 42.185183] EXT3 FS on dm-4, internal journal [ 42.185189] EXT3-fs: mounted filesystem with ordered data mode. [ 42.215236] kjournald starting. Commit interval 5 seconds [ 42.215436] EXT3 FS on dm-0, internal journal [ 42.215442] EXT3-fs: mounted filesystem with ordered data mode. [ 42.821526] ip_tables: (C) 2000-2006 Netfilter Core Team [ 43.275380] No dock devices found. [ 43.346661] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 46.909353] NET: Registered protocol family 10 [ 46.909555] lo: Disabled Privacy Extensions [ 47.380141] ppdev: user-space parallel port driver [ 48.149158] audit(1205352170.169:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5707 profile="/usr/sbin/cupsd" namespace="default" [ 48.252228] [drm] Initialized drm 1.1.0 20060810 [ 49.653389] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 49.653397] vboxdrv: Successfully done. [ 49.654915] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 49.654920] vboxdrv: Successfully loaded version 1.5.6 (interface 0x00050002). [ 51.688593] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 51.922508] Bluetooth: L2CAP ver 2.9 [ 51.922516] Bluetooth: L2CAP socket layer initialized [ 51.941493] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 52.081060] Bluetooth: RFCOMM socket layer initialized [ 52.081083] Bluetooth: RFCOMM TTY layer initialized [ 52.081086] Bluetooth: RFCOMM ver 1.8 [ 171.380868] NET: Registered protocol family 17 [ 174.181184] wlan0: Initial auth_alg=0 [ 174.181193] wlan0: authenticate with AP 00:15:f2:3d:6d:12 [ 174.182506] wlan0: RX authentication from 00:15:f2:3d:6d:12 (alg=0 transaction=2 status=0) [ 174.182512] wlan0: authenticated [ 174.182515] wlan0: associate with AP 00:15:f2:3d:6d:12 [ 174.184054] wlan0: authentication frame received from 00:15:f2:3d:6d:12, but not in authenticate state - ignored [ 174.186494] wlan0: authentication frame received from 00:15:f2:3d:6d:12, but not in authenticate state - ignored [ 174.188055] wlan0: RX AssocResp from 00:15:f2:3d:6d:12 (capab=0x431 status=0 aid=1) [ 174.188061] wlan0: associated [ 174.193519] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 192.002890] wlan0: no IPv6 routers present