[ 0.000000] Linux version 2.6.24-8-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:13:27 UTC 2008 (Ubuntu 2.6.24-8.14-generic) [ 0.000000] Command line: root=/dev/mapper/crypt-root ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) [ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffe5600 (reserved) [ 0.000000] BIOS-e820: 000000007ffe5600 - 000000007fff8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff8000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524240) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F96A0 checksum 0 [ 0.000000] ACPI: RSDP 000F96A0, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT 7FFE57C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: FACP 7FFE5684, 00F4 (r4 HP 30A3 3 HP 1) [ 0.000000] ACPI: DSDT 7FFE5ACC, 102DE (r1 HP nc8430 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FFF7E80, 0040 [ 0.000000] ACPI: SLIC 7FFE5844, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: HPET 7FFE59BC, 0038 (r1 HP 30A3 1 HP 1) [ 0.000000] ACPI: APIC 7FFE59F4, 0068 (r1 HP 30A3 1 HP 1) [ 0.000000] ACPI: MCFG 7FFE5A5C, 003C (r1 HP 30A3 1 HP 1) [ 0.000000] ACPI: TCPA 7FFE5A98, 0032 (r2 HP 30A3 1 HP 1) [ 0.000000] ACPI: SSDT 7FFF5DAA, 0059 (r1 HP HPQNLP 1 MSFT 100000E) [ 0.000000] ACPI: SSDT 7FFF5E03, 0326 (r1 HP HPQSAT 1 MSFT 100000E) [ 0.000000] ACPI: SSDT 7FFF697E, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT 7FFF6BDD, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT 7FFF6C83, 04D7 (r1 HP CpuPm 3000 INTL 20060317) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ffd0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524240) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffd0000 [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524240 [ 0.000000] On node 0 totalpages: 524143 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1204 pages reserved [ 0.000000] DMA zone: 2739 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 513033 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515772 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/crypt-root ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 10.764094] time.c: Detected 1995.000 MHz processor. [ 10.766037] Console: colour VGA+ 80x25 [ 10.766041] console [tty0] enabled [ 10.766058] Checking aperture... [ 10.766080] Calgary: detecting Calgary via BIOS EBDA area [ 10.766082] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 10.792175] Memory: 2054604k/2096960k available (2460k kernel code, 41968k reserved, 1302k data, 316k init) [ 10.792214] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 10.870021] Calibrating delay using timer specific routine.. 3994.36 BogoMIPS (lpj=7988726) [ 10.870058] Security Framework initialized [ 10.870066] SELinux: Disabled at boot. [ 10.870078] AppArmor: AppArmor initialized [ 10.870082] Failure registering capabilities with primary security module. [ 10.870298] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 10.871766] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 10.872573] Mount-cache hash table entries: 256 [ 10.872725] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.872728] CPU: L2 cache: 4096K [ 10.872731] CPU 0/0 -> Node 0 [ 10.872732] using mwait in idle threads. [ 10.872734] CPU: Physical Processor ID: 0 [ 10.872735] CPU: Processor Core ID: 0 [ 10.872741] CPU0: Thermal monitoring handled by SMI [ 10.872756] SMP alternatives: switching to UP code [ 10.873545] Early unpacking initramfs... done [ 11.246829] ACPI: Core revision 20070126 [ 11.246903] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 11.354874] Using local APIC timer interrupts. [ 11.404975] APIC timer calibration result 10390613 [ 11.404977] Detected 10.390 MHz APIC timer. [ 11.405056] SMP alternatives: switching to SMP code [ 11.405728] Booting processor 1/2 APIC 0x1 [ 11.416236] Initializing CPU#1 [ 11.492933] Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=7980063) [ 11.492939] CPU: L1 I cache: 32K, L1 D cache: 32K [ 11.492940] CPU: L2 cache: 4096K [ 11.492942] CPU 1/1 -> Node 0 [ 11.492944] CPU: Physical Processor ID: 0 [ 11.492945] CPU: Processor Core ID: 1 [ 11.492951] CPU1: Thermal monitoring enabled (TM2) [ 11.493460] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 11.493530] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 11.513547] Brought up 2 CPUs [ 11.513629] CPU0 attaching sched-domain: [ 11.513631] domain 0: span 03 [ 11.513632] groups: 01 02 [ 11.513635] domain 1: span 03 [ 11.513636] groups: 03 [ 11.513638] CPU1 attaching sched-domain: [ 11.513639] domain 0: span 03 [ 11.513640] groups: 02 01 [ 11.513643] domain 1: span 03 [ 11.513644] groups: 03 [ 11.513856] net_namespace: 120 bytes [ 11.514238] Time: 18:32:34 Date: 02/20/08 [ 11.514285] NET: Registered protocol family 16 [ 11.514463] ACPI: bus type pci registered [ 11.514532] PCI: Using configuration type 1 [ 11.516046] ACPI: EC: Look up EC in DSDT [ 11.518300] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 11.590326] ACPI: Interpreter enabled [ 11.590329] ACPI: (supports S0 S3 S4 S5) [ 11.590340] ACPI: Using IOAPIC for interrupt routing [ 11.601079] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 11.601081] ACPI: EC: driver started in interrupt mode [ 11.601139] ACPI: PCI Root Bridge [C002] (0000:00) [ 11.601876] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 11.601880] PCI quirk: region 1100-113f claimed by ICH6 GPIO [ 11.603316] PCI: Transparent bridge - 0000:00:1e.0 [ 11.603408] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] [ 11.603725] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C083._PRT] [ 11.603824] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT] [ 11.603958] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C103._PRT] [ 11.604087] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C113._PRT] [ 11.604220] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C119._PRT] [ 11.637091] ACPI: PCI Interrupt Link [C10F] (IRQs *10 11) [ 11.637298] ACPI: PCI Interrupt Link [C110] (IRQs *10 11) [ 11.637505] ACPI: PCI Interrupt Link [C111] (IRQs 10 *11) [ 11.637708] ACPI: PCI Interrupt Link [C112] (IRQs *10 11) [ 11.637912] ACPI: PCI Interrupt Link [C12B] (IRQs *10 11) [ 11.638116] ACPI: PCI Interrupt Link [C12C] (IRQs 10 *11) [ 11.638321] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11) [ 11.638418] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126] [ 11.638734] ACPI: Power Resource [C1F3] (on) [ 11.638909] ACPI: Power Resource [C200] (on) [ 11.638955] ACPI: Power Resource [C21D] (on) [ 11.639007] ACPI: Power Resource [C225] (off) [ 11.639113] ACPI: Power Resource [C323] (off) [ 11.639209] ACPI: Power Resource [C324] (off) [ 11.639304] ACPI: Power Resource [C325] (off) [ 11.639398] ACPI: Power Resource [C326] (off) [ 11.639492] ACPI: Power Resource [C327] (off) [ 11.639587] ACPI: Power Resource [C328] (off) [ 11.639630] ACPI: Power Resource [C329] (off) [ 11.639681] Linux Plug and Play Support v0.97 (c) Adam Belay [ 11.639709] pnp: PnP ACPI init [ 11.639716] ACPI: bus type pnp registered [ 11.649229] pnp: PnP ACPI: found 16 devices [ 11.649231] ACPI: ACPI bus type pnp unregistered [ 11.649439] PCI: Using ACPI for IRQ routing [ 11.649441] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 11.664854] NET: Registered protocol family 8 [ 11.664856] NET: Registered protocol family 20 [ 11.664886] PCI-GART: No AMD northbridge found. [ 11.664892] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 11.664895] hpet0: 3 64-bit timers, 14318180 Hz [ 11.665928] AppArmor: AppArmor Filesystem Enabled [ 11.665944] ACPI: RTC can wake from S4 [ 11.668834] Time: tsc clocksource has been installed. [ 11.668841] Switched to high resolution mode on CPU 0 [ 11.669451] Switched to high resolution mode on CPU 1 [ 11.676817] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 11.676820] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 11.676823] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved [ 11.676832] system 00:0c: ioport range 0x500-0x55f has been reserved [ 11.676834] system 00:0c: ioport range 0x800-0x80f has been reserved [ 11.676837] system 00:0c: iomem range 0xffb00000-0xffbfffff could not be reserved [ 11.676839] system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved [ 11.676844] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved [ 11.676846] system 00:0e: ioport range 0x1000-0x107f has been reserved [ 11.676848] system 00:0e: ioport range 0x1100-0x113f has been reserved [ 11.676850] system 00:0e: ioport range 0x1200-0x121f has been reserved [ 11.676853] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved [ 11.676855] system 00:0e: iomem range 0xfec00000-0xfec000ff could not be reserved [ 11.676857] system 00:0e: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 11.676860] system 00:0e: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 11.676862] system 00:0e: iomem range 0xfed90000-0xfed9afff could not be reserved [ 11.676866] system 00:0f: iomem range 0xcfe00-0xcffff has been reserved [ 11.676869] system 00:0f: iomem range 0xfeda0000-0xfedbffff could not be reserved [ 11.676871] system 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved [ 11.677274] PCI: Bridge: 0000:00:01.0 [ 11.677276] IO window: 4000-4fff [ 11.677279] MEM window: f4600000-f46fffff [ 11.677282] PREFETCH window: e0000000-efffffff [ 11.677285] PCI: Bridge: 0000:00:1c.0 [ 11.677286] IO window: disabled. [ 11.677291] MEM window: f4100000-f41fffff [ 11.677295] PREFETCH window: disabled. [ 11.677300] PCI: Bridge: 0000:00:1c.1 [ 11.677301] IO window: disabled. [ 11.677306] MEM window: f4000000-f40fffff [ 11.677310] PREFETCH window: disabled. [ 11.677315] PCI: Bridge: 0000:00:1c.3 [ 11.677317] IO window: 2000-3fff [ 11.677323] MEM window: f0000000-f3ffffff [ 11.677326] PREFETCH window: disabled. [ 11.677335] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [ 11.677336] IO window: 00001400-000014ff [ 11.677341] IO window: 00001800-000018ff [ 11.677346] PREFETCH window: 88000000-8bffffff [ 11.677351] MEM window: 8c000000-8fffffff [ 11.677356] PCI: Bridge: 0000:00:1e.0 [ 11.677357] IO window: disabled. [ 11.677362] MEM window: f4200000-f45fffff [ 11.677366] PREFETCH window: disabled. [ 11.677381] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.677385] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.677406] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.677411] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.677434] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 11.677440] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 11.677462] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 11.677467] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 11.677480] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 11.677499] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 11.677510] NET: Registered protocol family 2 [ 11.712861] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 11.713506] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 11.715482] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 11.716264] TCP: Hash tables configured (established 262144 bind 65536) [ 11.716267] TCP reno registered [ 11.724923] checking if image is initramfs... it is [ 12.458847] Freeing initrd memory: 8271k freed [ 12.464154] audit: initializing netlink socket (disabled) [ 12.464176] audit(1203532354.580:1): initialized [ 12.466304] VFS: Disk quotas dquot_6.5.1 [ 12.466368] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 12.466482] io scheduler noop registered [ 12.466483] io scheduler anticipatory registered [ 12.466485] io scheduler deadline registered [ 12.466589] io scheduler cfq registered (default) [ 12.468887] Boot video device is 0000:01:00.0 [ 12.469053] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 12.469086] assign_interrupt_mode Found MSI capability [ 12.469113] Allocate Port Service[0000:00:01.0:pcie00] [ 12.469192] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.469247] assign_interrupt_mode Found MSI capability [ 12.469290] Allocate Port Service[0000:00:1c.0:pcie00] [ 12.469322] Allocate Port Service[0000:00:1c.0:pcie02] [ 12.469427] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 12.469482] assign_interrupt_mode Found MSI capability [ 12.469525] Allocate Port Service[0000:00:1c.1:pcie00] [ 12.469559] Allocate Port Service[0000:00:1c.1:pcie02] [ 12.469655] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 12.469710] assign_interrupt_mode Found MSI capability [ 12.469753] Allocate Port Service[0000:00:1c.3:pcie00] [ 12.469787] Allocate Port Service[0000:00:1c.3:pcie02] [ 12.493651] Real Time Clock Driver v1.12ac [ 12.493896] hpet_resources: 0xfed00000 is busy [ 12.493954] Linux agpgart interface v0.102 [ 12.493956] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.494110] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.494609] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.495422] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 12.495481] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 12.495576] PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12 [ 12.497483] i8042.c: Detected active multiplexing controller, rev 1.1. [ 12.498242] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.498246] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 12.498248] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 12.498250] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 12.498252] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 12.508437] mice: PS/2 mouse device common for all mice [ 12.508469] cpuidle: using governor ladder [ 12.508471] cpuidle: using governor menu [ 12.508593] NET: Registered protocol family 1 [ 12.508642] registered taskstats version 1 [ 12.508732] Magic number: 12:863:544 [ 12.508800] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 12.508807] Freeing unused kernel memory: 316k freed [ 12.545325] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 13.669080] fuse init (API version 7.9) [ 13.673615] ACPI: Transitioning device [C32A] to D3 [ 13.673618] ACPI: Transitioning device [C32A] to D3 [ 13.673620] ACPI: Fan [C32A] (off) [ 13.673804] ACPI: Transitioning device [C32B] to D3 [ 13.673806] ACPI: Transitioning device [C32B] to D3 [ 13.673808] ACPI: Fan [C32B] (off) [ 13.673991] ACPI: Transitioning device [C32C] to D3 [ 13.673992] ACPI: Transitioning device [C32C] to D3 [ 13.673995] ACPI: Fan [C32C] (off) [ 13.674175] ACPI: Transitioning device [C32D] to D3 [ 13.674177] ACPI: Transitioning device [C32D] to D3 [ 13.674179] ACPI: Fan [C32D] (off) [ 13.674360] ACPI: Transitioning device [C32E] to D3 [ 13.674361] ACPI: Transitioning device [C32E] to D3 [ 13.674365] ACPI: Fan [C32E] (off) [ 13.674545] ACPI: Transitioning device [C32F] to D3 [ 13.674547] ACPI: Transitioning device [C32F] to D3 [ 13.674549] ACPI: Fan [C32F] (off) [ 13.674629] ACPI: Transitioning device [C330] to D3 [ 13.674630] ACPI: Transitioning device [C330] to D3 [ 13.674632] ACPI: Fan [C330] (off) [ 13.679047] ACPI: SSDT 7FFF61F1, 023D (r1 HP Cpu0Ist 3000 INTL 20060317) [ 13.679260] ACPI: SSDT 7FFF64B3, 04CB (r1 HP Cpu0Cst 3001 INTL 20060317) [ 13.687318] Monitor-Mwait will be used to enter C-1 state [ 13.687320] Monitor-Mwait will be used to enter C-2 state [ 13.687408] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 13.687412] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.687626] ACPI: SSDT 7FFF6129, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) [ 13.687830] ACPI: SSDT 7FFF642E, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) [ 13.688913] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 13.688917] ACPI: Processor [CPU1] (supports 8 throttling states) [ 13.689453] Marking TSC unstable due to TSC halts in idle [ 13.691591] Time: hpet clocksource has been installed. [ 13.729360] ACPI: Thermal Zone [TZ0] (28 C) [ 13.752710] ACPI: Thermal Zone [TZ1] (31 C) [ 13.776017] ACPI: Thermal Zone [TZ2] (28 C) [ 13.786195] ACPI: Thermal Zone [TZ3] (23 C) [ 13.789846] ACPI: Thermal Zone [TZ4] (67 C) [ 13.802542] device-mapper: uevent: version 1.0.3 [ 13.802590] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 14.172294] usbcore: registered new interface driver usbfs [ 14.172313] usbcore: registered new interface driver hub [ 14.172631] usbcore: registered new device driver usb [ 14.173625] USB Universal Host Controller Interface driver v3.0 [ 14.173679] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 14.173690] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 14.173693] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.173955] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 14.173992] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000 [ 14.174113] usb usb1: configuration #1 chosen from 1 choice [ 14.174133] hub 1-0:1.0: USB hub found [ 14.174137] hub 1-0:1.0: 2 ports detected [ 14.259614] SCSI subsystem initialized [ 14.264182] libata version 3.00 loaded. [ 14.276364] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 14.276377] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.276381] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.276402] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 14.276435] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00005020 [ 14.276530] usb usb2: configuration #1 chosen from 1 choice [ 14.276549] hub 2-0:1.0: USB hub found [ 14.276554] hub 2-0:1.0: 2 ports detected [ 14.380329] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 14.380341] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.380345] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.380366] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 14.380398] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040 [ 14.380494] usb usb3: configuration #1 chosen from 1 choice [ 14.380513] hub 3-0:1.0: USB hub found [ 14.380517] hub 3-0:1.0: 2 ports detected [ 14.484247] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 14.484258] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 14.484261] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 14.484282] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 14.484314] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060 [ 14.484404] usb usb4: configuration #1 chosen from 1 choice [ 14.484424] hub 4-0:1.0: USB hub found [ 14.484428] hub 4-0:1.0: 2 ports detected [ 14.588227] tg3.c:v3.86 (November 9, 2007) [ 14.588259] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.588270] PCI: Setting latency timer of device 0000:08:00.0 to 64 [ 14.620065] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 14.630455] eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:17:08:46:80:77 [ 14.630460] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 14.630462] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 14.630502] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 14.631422] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 14.631429] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 14.631477] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 14.635399] ehci_hcd 0000:00:1d.7: debug port 1 [ 14.635405] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 14.635412] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4704000 [ 14.747008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.747194] usb usb5: configuration #1 chosen from 1 choice [ 14.747244] hub 5-0:1.0: USB hub found [ 14.747250] hub 5-0:1.0: 8 ports detected [ 14.851211] ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 14.901356] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f4201000-f42017ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 14.901456] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.901494] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 14.901506] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 14.901691] ahci 0000:00:1f.2: version 3.0 [ 14.901715] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 14.902677] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports [ 14.902681] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf [ 15.142759] usb 2-1: device not accepting address 2, error -71 [ 15.734397] usb 2-1: new full speed USB device using uhci_hcd and address 4 [ 15.897713] usb 2-1: configuration #1 chosen from 1 choice [ 15.902318] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 15.902322] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 15.902327] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 15.903044] scsi0 : ahci [ 15.903232] scsi1 : ahci [ 15.903361] scsi2 : ahci [ 15.903491] scsi3 : ahci [ 15.903547] ata1: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705100 irq 507 [ 15.903551] ata2: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705180 irq 507 [ 15.903554] ata3: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705200 irq 507 [ 15.903556] ata4: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705280 irq 507 [ 16.541915] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.544913] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 16.544916] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 16.544977] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 16.545703] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded [ 16.547177] ata1.00: ATA-7: ST980825AS, 3.12, max UDMA/100 [ 16.547182] ata1.00: 156301488 sectors, multi 16: LBA48 [ 16.550436] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 16.550439] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 16.550528] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 16.551260] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded [ 16.552745] ata1.00: configured for UDMA/100 [ 16.556002] ata1.00: configured for UDMA/100 [ 16.556006] ata1: EH complete [ 16.873713] ata2: SATA link down (SStatus 0 SControl 0) [ 17.193519] ata3: SATA link down (SStatus 0 SControl 0) [ 17.513325] ata4: SATA link down (SStatus 0 SControl 0) [ 17.513470] scsi 0:0:0:0: Direct-Access ATA ST980825AS 3.12 PQ: 0 ANSI: 5 [ 17.515419] ata_piix 0000:00:1f.1: version 2.12 [ 17.515435] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.515469] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 17.515532] scsi4 : ata_piix [ 17.515579] scsi5 : ata_piix [ 17.516007] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14 [ 17.516009] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15 [ 17.520981] Driver 'sd' needs updating - please use bus_type methods [ 17.530358] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 17.530378] sd 0:0:0:0: [sda] Write Protect is off [ 17.530382] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.530409] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.530477] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 17.530493] sd 0:0:0:0: [sda] Write Protect is off [ 17.530497] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.530523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.530529] sda: sda1 sda2 sda3 [ 17.543522] sd 0:0:0:0: [sda] Attached SCSI disk [ 17.546768] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.833613] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PC05, max MWDMA2 [ 18.005434] ata5.00: configured for MWDMA2 [ 18.005493] ata6: port disabled. ignoring. [ 18.009397] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PC05 PQ: 0 ANSI: 5 [ 18.009519] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 18.014961] Driver 'sr' needs updating - please use bus_type methods [ 18.033208] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 18.033213] Uniform CD-ROM driver Revision: 3.20 [ 18.033268] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 28.096677] Attempting manual resume [ 28.096680] swsusp: Resume From Partition 254:2 [ 28.096681] PM: Checking swsusp image. [ 28.096982] PM: Resume from disk failed. [ 28.124443] kjournald starting. Commit interval 5 seconds [ 28.124456] EXT3-fs: mounted filesystem with ordered data mode. [ 35.142202] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 35.310182] intel_rng: FWH not detected [ 35.402186] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.478292] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.593703] ACPI: AC Adapter [C1BC] (on-line) [ 35.745445] input: Power Button (FF) as /devices/virtual/input/input3 [ 35.756802] ACPI: Battery Slot [C1BE] (battery present) [ 35.794198] ACPI: Power Button (FF) [PWRF] [ 35.797842] ACPI: Battery Slot [C1BD] (battery present) [ 35.798323] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 35.850222] tpm_inf_pnp 00:04: Found C202 with ID IFX0102 [ 35.850278] tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 35.858231] ACPI: Sleep Button (CM) [C246] [ 35.858279] input: Lid Switch as /devices/virtual/input/input5 [ 35.886246] ACPI: Lid Switch [C23E] [ 35.957123] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a3] [ 35.957147] Yenta: Enabling burst memory read transactions [ 35.957153] Yenta: Using INTVAL to route CSC interrupts to PCI [ 35.957154] Yenta: Routing CardBus interrupts to PCI [ 35.957159] Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64 [ 35.981736] parport_pc 00:03: reported by Plug and Play ACPI [ 35.981819] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 36.128242] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 36.178971] ACPI: Video Device [C136] (multi-head: yes rom: no post: no) [ 36.187656] Yenta: ISA IRQ mask 0x0c78, PCI irq 18 [ 36.187660] Socket status: 30000006 [ 36.187663] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 36.187668] pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff [ 36.211185] ACPI: PCI Interrupt 0000:02:06.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 36.230970] iTCO_vendor_support: vendor-support=0 [ 36.319589] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 36.347354] sdhci: Secure Digital Host Controller Interface driver [ 36.347358] sdhci: Copyright(c) Pierre Ossman [ 36.347399] sdhci: SDHCI controller found at 0000:02:06.3 [104c:803c] (rev 0) [ 36.347430] ACPI: PCI Interrupt 0000:02:06.3[C] -> GSI 22 (level, low) -> IRQ 22 [ 36.348441] mmc0: SDHCI at 0xf4209000 irq 22 PIO [ 36.382680] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44793/0x300000 [ 36.382686] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 36.423937] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 36.480769] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 36.480808] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 36.542300] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 36.542305] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 36.542414] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 36.542428] PCI: Setting latency timer of device 0000:10:00.0 to 64 [ 36.543352] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 36.775582] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 36.776530] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 37.600074] iwl3945: Radio Frequency Kill Switch is On: [ 37.600079] Kill switch must be turned off for wireless networking to work. [ 37.605069] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 37.615167] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 37.635270] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 37.663088] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 37.683179] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 38.096299] loop: module loaded [ 38.109880] lp0: using parport0 (interrupt-driven). [ 38.255833] Adding 2097144k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1 across:2097144k [ 38.828675] EXT3 FS on dm-3, internal journal [ 40.049738] kjournald starting. Commit interval 5 seconds [ 40.055725] EXT3 FS on sda1, internal journal [ 40.055732] EXT3-fs: mounted filesystem with ordered data mode. [ 40.087097] kjournald starting. Commit interval 5 seconds [ 40.087390] EXT3 FS on dm-4, internal journal [ 40.087396] EXT3-fs: mounted filesystem with ordered data mode. [ 40.117222] kjournald starting. Commit interval 5 seconds [ 40.117400] EXT3 FS on dm-0, internal journal [ 40.117405] EXT3-fs: mounted filesystem with ordered data mode. [ 40.644972] ip_tables: (C) 2000-2006 Netfilter Core Team [ 41.113925] No dock devices found. [ 41.166970] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 41.211554] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input8 [ 44.325903] NET: Registered protocol family 10 [ 44.326099] lo: Disabled Privacy Extensions [ 44.665347] ppdev: user-space parallel port driver [ 45.437820] audit(1203532388.408:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5610 profile="/usr/sbin/cupsd" namespace="default" [ 45.593549] [drm] Initialized drm 1.1.0 20060810 [ 46.687984] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 46.687992] vboxdrv: Successfully done. [ 46.688068] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 46.688071] vboxdrv: Successfully loaded version 1.5.6 (interface 0x00050002). [ 48.464927] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 48.668980] Bluetooth: Core ver 2.11 [ 48.669069] NET: Registered protocol family 31 [ 48.669072] Bluetooth: HCI device and connection manager initialized [ 48.669078] Bluetooth: HCI socket layer initialized [ 48.711865] Bluetooth: L2CAP ver 2.9 [ 48.711872] Bluetooth: L2CAP socket layer initialized [ 48.741429] Bluetooth: RFCOMM socket layer initialized [ 48.741444] Bluetooth: RFCOMM TTY layer initialized [ 48.741446] Bluetooth: RFCOMM ver 1.8 [ 170.829156] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 171.097729] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 171.379592] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 171.617624] usb 1-1: configuration #1 chosen from 1 choice [ 171.759403] Bluetooth: HCI USB driver ver 2.9 [ 171.762269] usbcore: registered new interface driver hci_usb [ 183.076789] NET: Registered protocol family 17 [ 185.723428] wlan0: Initial auth_alg=0 [ 185.723437] wlan0: authenticate with AP 00:15:f2:3d:6d:12 [ 185.724737] wlan0: RX authentication from 00:15:f2:3d:6d:12 (alg=0 transaction=2 status=0) [ 185.724743] wlan0: authenticated [ 185.724746] wlan0: associate with AP 00:15:f2:3d:6d:12 [ 185.727473] wlan0: authentication frame received from 00:15:f2:3d:6d:12, but not in authenticate state - ignored [ 185.729081] wlan0: RX AssocResp from 00:15:f2:3d:6d:12 (capab=0x431 status=0 aid=1) [ 185.729087] wlan0: associated [ 185.734410] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 185.734497] wlan0: association frame received from 00:15:f2:3d:6d:12, but not in associate state - ignored [ 186.097908] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 187.019017] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 187.020535] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 187.326828] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 187.329953] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 187.333106] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 187.635032] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 187.942010] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 188.247968] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 188.863023] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 190.091496] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 190.094845] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 190.095841] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 190.097633] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 190.100209] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 190.103622] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 190.396238] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 190.398040] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 190.400528] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 190.704804] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 191.011836] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 191.014257] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 191.317653] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 191.319445] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 191.624511] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 191.625370] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 192.239800] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 192.241087] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 192.852541] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 192.853809] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 192.855788] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 192.858938] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 192.861010] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 192.862432] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 193.161664] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 193.163832] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 193.166936] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 193.169073] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 193.170481] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 193.467635] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 193.470650] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 193.472639] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 193.774549] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 194.080590] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 194.083150] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 194.389613] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 194.695441] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 195.001961] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 195.924251] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 196.538827] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 196.540852] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 196.844019] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 200.835471] wmaster0: CCMP decrypt failed for RX frame from 00:15:f2:3d:6d:12 [ 201.557932] wlan0: no IPv6 routers present [ 1067.190284] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 1067.190291] vboxdrv: Successfully done. [ 1067.191563] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 1067.191568] vboxdrv: Successfully loaded version 1.5.6 (interface 0x00050002).