Brian Murray ha scritto: > Thanks for your bug report. Could you please attach the output of > 'dmesg' and 'lsusb'? > > ** Changed in: Ubuntu > Sourcepackagename: None => linux-source-2.6.17 > Status: Unconfirmed => Needs Info > > I want add another bug: my pc don't shut down. It seems crashed and shut down sound make an infinite loop. Sorry for my english. Thanks output of "lsusb": Bus 005 Device 003: ID 13d3:3211 IMC Networks Bus 005 Device 001: ID 0000:0000 Bus 001 Device 008: ID 046d:c703 Logitech, Inc. Bus 001 Device 007: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub Bus 001 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 003: ID 051d:0002 American Power Conversion Back-UPS Pro 500/1000/1500 Bus 003 Device 002: ID 145f:0106 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 output of "dmesg": [ 0.000000] Bootdata ok (command line is root=UUID=b1199045-2046-4a34-b085-fa 8332f945c3 ro quiet splash) [ 0.000000] Linux version 2.6.17-10-generic (root@crested) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 15:34:39 UTC 2006 (Ubuntu 2.6.17-10.33-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098c00 (usable) [ 0.000000] BIOS-e820: 0000000000098c00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff80000 (usable) [ 0.000000] BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff8e000 - 000000003ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v002 ACPIAM ) @ 0x0000 0000000fa940 [ 0.000000] ACPI: XSDT (v001 A M I OEMXSDT 0x03000631 MSFT 0x00000097) @ 0x 000000003ff80100 [ 0.000000] ACPI: FADT (v003 A M I OEMFACP 0x03000631 MSFT 0x00000097) @ 0x 000000003ff80290 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x03000631 MSFT 0x00000097) @ 0x 000000003ff80390 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x03000631 MSFT 0x00000097) @ 0x 000000003ff8e040 [ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x03000631 MSFT 0x00000097) @ 0x 000000003ff88800 [ 0.000000] ACPI: DSDT (v001 A0229 A0229000 0x00000000 INTL 0x02002026) @ 0x 0000000000000000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003ff80000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003ff80000 [ 0.000000] On node 0 totalpages: 256973 [ 0.000000] DMA zone: 2579 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 254394 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb0 0000) [ 0.000000] Checking aperture... [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=UUID=b1199045-2046-4a34-b085-fa8332f945 c3 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 0.000000] time.c: Detected 3010.722 MHz processor. [ 45.838453] Console: colour VGA+ 80x25 [ 45.838908] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 45.839382] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 45.847912] Memory: 1018924k/1048064k available (2129k kernel code, 28724k re served, 1424k data, 188k init) [ 45.927723] Calibrating delay using timer specific routine.. 6026.75 BogoMIPS (lpj=12053505) [ 45.927781] Security Framework v1.0.0 initialized [ 45.927785] SELinux: Disabled at boot. [ 45.927811] Mount-cache hash table entries: 256 [ 45.927957] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 45.927960] CPU: L2 cache: 1024K [ 45.927963] using mwait in idle threads. [ 45.927965] CPU: Physical Processor ID: 0 [ 45.927967] CPU: Processor Core ID: 0 [ 45.927977] CPU0: Thermal monitoring enabled (TM1) [ 45.927989] SMP alternatives: switching to UP code [ 45.928227] checking if image is initramfs... it is [ 46.537215] Freeing initrd memory: 7235k freed [ 46.541015] ACPI: Core revision 20060707 [ 46.541184] ACPI: Looking for DSDT ... not found! [ 46.616704] Using local APIC timer interrupts. [ 46.649912] result 12544617 [ 46.649914] Detected 12.544 MHz APIC timer. [ 46.651749] SMP alternatives: switching to SMP code [ 46.651838] Booting processor 1/2 APIC 0x1 [ 46.662235] Initializing CPU#1 [ 46.739465] Calibrating delay using timer specific routine.. 6021.84 BogoMIPS (lpj=12043682) [ 46.739475] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 46.739477] CPU: L2 cache: 1024K [ 46.739481] CPU: Physical Processor ID: 0 [ 46.739482] CPU: Processor Core ID: 1 [ 46.739492] CPU1: Thermal monitoring enabled (TM1) [ 46.739699] Intel(R) Pentium(R) D CPU 3.00GHz stepping 04 [ 46.743471] APIC error on CPU1: 00(40) [ 46.743484] Brought up 2 CPUs [ 46.743515] testing NMI watchdog ... OK. [ 46.912536] migration_cost=676 [ 46.912858] NET: Registered protocol family 16 [ 46.912884] ACPI: bus type pci registered [ 46.912889] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved [ 46.912891] PCI: Not using MMCONFIG. [ 46.912896] PCI: Using configuration type 1 [ 46.924795] ACPI: Interpreter enabled [ 46.924800] ACPI: Using IOAPIC for interrupt routing [ 46.926036] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 46.926039] PCI: Probing PCI hardware (bus 00) [ 46.929547] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 46.929750] Boot video device is 0000:05:00.0 [ 46.930938] PCI: Transparent bridge - 0000:00:1e.0 [ 46.931010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 46.934334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 46.934665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 46.935047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 46.936051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 46.936376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 46.942861] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 46.943151] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 46.943447] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 46.943734] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 46.944017] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 46.944304] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 46.944593] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 46.944880] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 46.944998] Linux Plug and Play Support v0.97 (c) Adam Belay [ 46.945012] pnp: PnP ACPI init [ 46.950724] pnp: PnP ACPI: found 15 devices [ 46.950771] PCI: Using ACPI for IRQ routing [ 46.950774] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 46.950962] PCI-DMA: Disabling IOMMU. [ 46.951855] pnp: 00:08: ioport range 0x290-0x297 has been reserved [ 46.952106] PCI: Bridge: 0000:00:01.0 [ 46.952109] IO window: e000-efff [ 46.952113] MEM window: dff00000-dfffffff [ 46.952117] PREFETCH window: e0000000-efffffff [ 46.952121] PCI: Bridge: 0000:00:1c.0 [ 46.952124] IO window: d000-dfff [ 46.952128] MEM window: disabled. [ 46.952132] PREFETCH window: disabled. [ 46.952137] PCI: Bridge: 0000:00:1c.4 [ 46.952139] IO window: c000-cfff [ 46.952144] MEM window: dfe00000-dfefffff [ 46.952148] PREFETCH window: disabled. [ 46.952153] PCI: Bridge: 0000:00:1c.5 [ 46.952155] IO window: b000-bfff [ 46.952161] MEM window: dfd00000-dfdfffff [ 46.952164] PREFETCH window: disabled. [ 46.952172] PCI: Bridge: 0000:00:1e.0 [ 46.952174] IO window: 8000-afff [ 46.952179] MEM window: dfc00000-dfcfffff [ 46.952184] PREFETCH window: 50000000-500fffff [ 46.952200] GSI 16 sharing vector 0xA9 and IRQ 16 [ 46.952202] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 46.952207] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 46.952224] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 46.952229] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 46.952246] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 [ 46.952251] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 46.952268] GSI 17 sharing vector 0xB1 and IRQ 17 [ 46.952270] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177 [ 46.952275] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 46.952286] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 46.952336] NET: Registered protocol family 2 [ 46.988594] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 46.988777] TCP established hash table entries: 131072 (order: 9, 2097152 byt es) [ 46.989708] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 46.990250] TCP: Hash tables configured (established 131072 bind 65536) [ 46.990253] TCP reno registered [ 46.990968] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 46.991538] audit: initializing netlink socket (disabled) [ 46.991551] audit(1170342651.160:1): initialized [ 46.991773] VFS: Disk quotas dquot_6.5.1 [ 46.991797] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 46.991848] Initializing Cryptographic API [ 46.991852] io scheduler noop registered [ 46.991863] io scheduler anticipatory registered [ 46.991873] io scheduler deadline registered [ 46.991904] io scheduler cfq registered (default) [ 46.992873] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 46.992881] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 46.992920] assign_interrupt_mode Found MSI capability [ 46.992980] Allocate Port Service[0000:00:01.0:pcie00] [ 46.993030] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 46.993036] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 46.993078] assign_interrupt_mode Found MSI capability [ 46.993126] Allocate Port Service[0000:00:1c.0:pcie00] [ 46.993177] Allocate Port Service[0000:00:1c.0:pcie02] [ 46.993223] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 [ 46.993230] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 46.993271] assign_interrupt_mode Found MSI capability [ 46.993315] Allocate Port Service[0000:00:1c.4:pcie00] [ 46.993363] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177 [ 46.993369] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 46.993414] assign_interrupt_mode Found MSI capability [ 46.993457] Allocate Port Service[0000:00:1c.5:pcie00] [ 47.020881] Real Time Clock Driver v1.12ac [ 47.020938] Linux agpgart interface v0.101 (c) Dave Jones [ 47.020942] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 47.021077] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 47.021731] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 47.021947] mice: PS/2 mouse device common for all mice [ 47.022646] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 bloc ksize [ 47.022776] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 47.022779] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 47.023002] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 47.023005] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 47.025097] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 47.025266] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 47.025539] TCP bic registered [ 47.025562] NET: Registered protocol family 1 [ 47.025567] NET: Registered protocol family 8 [ 47.025569] NET: Registered protocol family 20 [ 47.025702] ACPI: (supports S0 S1 S3 S4 S5) [ 47.025749] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.025775] Freeing unused kernel memory: 188k freed [ 47.083625] vga16fb: initializing [ 47.083631] vga16fb: mapped to 0xffff8100000a0000 [ 47.086296] input: AT Translated Set 2 keyboard as /class/input/input0 [ 47.202672] Console: switching to colour frame buffer device 80x25 [ 47.202678] fb0: VGA16 VGA frame buffer device [ 48.234368] Capability LSM initialized [ 48.271622] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.C PU1._PDC] (Node ffff810037fe9210), AE_BAD_HEADER [ 48.271926] ACPI: Processor [CPU1] (supports 8 throttling states) [ 48.272003] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.C PU2._PDC] (Node ffff810037fe9ad0), AE_BAD_HEADER [ 48.272276] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Dev ice is not present [20060707] [ 48.272281] ACPI: Getting cpuindex for acpiid 0x3 [ 48.272288] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Dev ice is not present [20060707] [ 48.272292] ACPI: Getting cpuindex for acpiid 0x4 [ 48.655349] ICH7: IDE controller at PCI slot 0000:00:1f.1 [ 48.655362] GSI 18 sharing vector 0xE1 and IRQ 18 [ 48.655365] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 225 [ 48.655376] ICH7: chipset revision 1 [ 48.655378] ICH7: not 100% native mode: will probe irqs later [ 48.655388] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pi o [ 48.655402] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pi o [ 48.655412] Probing IDE interface ide0... [ 49.392066] hda: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive [ 50.063762] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 50.064016] Probing IDE interface ide1... [ 50.643094] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33 ) [ 50.643103] Uniform CD-ROM driver Revision: 3.20 [ 50.764162] SCSI subsystem initialized [ 50.767504] libata version 1.20 loaded. [ 50.768688] ahci 0000:00:1f.2: version 1.2 [ 50.768710] GSI 19 sharing vector 0xE9 and IRQ 19 [ 50.768713] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 233 [ 53.419016] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 53.419025] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf imp l RAID mode [ 53.419028] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part [ 53.419087] ata1: SATA max UDMA/133 cmd 0xFFFFC20000046D00 ctl 0x0 bmdma 0x0 irq 50 [ 53.419114] ata2: SATA max UDMA/133 cmd 0xFFFFC20000046D80 ctl 0x0 bmdma 0x0 irq 50 [ 53.419140] ata3: SATA max UDMA/133 cmd 0xFFFFC20000046E00 ctl 0x0 bmdma 0x0 irq 50 [ 53.419165] ata4: SATA max UDMA/133 cmd 0xFFFFC20000046E80 ctl 0x0 bmdma 0x0 irq 50 [ 53.794919] ata1: SATA link up 3.0 Gbps (SStatus 123) [ 53.808087] ata1: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3469 86:3c01 8 7:4763 88:207f [ 53.808091] ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 [ 53.808814] ata1: dev 0 configured for UDMA/133 [ 53.808817] scsi0 : ahci [ 54.182793] ata2: SATA link up 3.0 Gbps (SStatus 123) [ 54.183260] ata2: dev 0 cfg 49:2f00 82:706b 83:7e61 84:4023 85:7069 86:3c41 8 7:4023 88:207f [ 54.183265] ata2: dev 0 ATA-7, max UDMA/133, 490234752 sectors: LBA48 [ 54.183798] ata2: dev 0 configured for UDMA/133 [ 54.183801] scsi1 : ahci [ 54.558682] ata3: SATA link up 3.0 Gbps (SStatus 123) [ 54.559163] ata3: dev 0 cfg 49:2f00 82:706b 83:7e61 84:4023 85:7069 86:3c41 87:4023 88:207 f [ 54.559167] ata3: dev 0 ATA-7, max UDMA/133, 490234752 sectors: LBA48 [ 54.559694] ata3: dev 0 configured for UDMA/133 [ 54.559696] scsi2 : ahci [ 55.478382] ata4: SATA link down (SStatus 0) [ 55.478386] scsi3 : ahci [ 55.478506] Vendor: ATA Model: HDT722525DLA380 Rev: V44O [ 55.478519] Type: Direct-Access ANSI SCSI revision: 05 [ 55.478627] Vendor: ATA Model: WDC WD2500YD-01N Rev: 10.0 [ 55.478640] Type: Direct-Access ANSI SCSI revision: 05 [ 55.478734] Vendor: ATA Model: WDC WD2500YD-01N Rev: 10.0 [ 55.478747] Type: Direct-Access ANSI SCSI revision: 05 [ 55.488780] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 55.488796] sda: Write Protect is off [ 55.488799] sda: Mode Sense: 00 3a 00 00 [ 55.488822] SCSI device sda: drive cache: write back [ 55.488877] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 55.488890] sda: Write Protect is off [ 55.488892] sda: Mode Sense: 00 3a 00 00 [ 55.488914] SCSI device sda: drive cache: write back [ 55.488918] sda: sda1 sda2 sda3 sda4 < sda5 > [ 55.528409] sd 0:0:0:0: Attached scsi disk sda [ 55.528465] SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) [ 55.528479] sdb: Write Protect is off [ 55.528481] sdb: Mode Sense: 00 3a 00 00 [ 55.528503] SCSI device sdb: drive cache: write back [ 55.528541] SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) [ 55.528554] sdb: Write Protect is off [ 55.528557] sdb: Mode Sense: 00 3a 00 00 [ 55.528578] SCSI device sdb: drive cache: write back [ 55.528581] sdb: sdb1 [ 55.537898] sd 1:0:0:0: Attached scsi disk sdb [ 55.537972] SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB) [ 55.537987] sdc: Write Protect is off [ 55.537989] sdc: Mode Sense: 00 3a 00 00 [ 55.538013] SCSI device sdc: drive cache: write back [ 55.538067] SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB) [ 55.538080] sdc: Write Protect is off [ 55.538082] sdc: Mode Sense: 00 3a 00 00 [ 55.538110] SCSI device sdc: drive cache: write back [ 55.538113] sdc: sdc1 [ 55.555455] sd 2:0:0:0: Attached scsi disk sdc [ 55.609475] Buffer I/O error on device sdc1, logical block 629137280 [ 55.609497] Buffer I/O error on device sdc1, logical block 629137281 [ 55.609501] Buffer I/O error on device sdc1, logical block 629137282 [ 55.609505] Buffer I/O error on device sdc1, logical block 629137283 [ 55.609508] Buffer I/O error on device sdc1, logical block 629137284 [ 55.609511] Buffer I/O error on device sdc1, logical block 629137285 [ 55.609514] Buffer I/O error on device sdc1, logical block 629137286 [ 55.609518] Buffer I/O error on device sdc1, logical block 629137287 [ 55.609534] Buffer I/O error on device sdc1, logical block 629137280 [ 55.609538] Buffer I/O error on device sdc1, logical block 629137281 [ 55.761844] IT8212: IDE controller at PCI slot 0000:01:04.0 [ 55.761865] GSI 20 sharing vector 0x3A and IRQ 20 [ 55.761869] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 19 (level, low) -> IRQ 58 [ 55.761880] IT8212: chipset revision 17 [ 55.761883] it821x: controller in pass through mode. [ 55.761885] IT8212: 100% native mode on irq 58 [ 55.761892] ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:pio, hdf:pio [ 55.761905] ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:pio, hdh:pio [ 55.761918] Probing IDE interface ide2... [ 56.330616] Probing IDE interface ide3... [ 57.066637] hdg: ASUS DVD-E616A, ATAPI CD/DVD-ROM drive [ 57.738402] ide3 at 0x9800-0x9807,0x9402 on irq 58 [ 57.738901] hdg: ATAPI 48X DVD-ROM drive, 2048kB Cache [ 57.837435] Probing IDE interface ide1... [ 57.874954] usbcore: registered new driver usbfs [ 57.875535] usbcore: registered new driver hub [ 57.876461] USB Universal Host Controller Interface driver v3.0 [ 57.876514] GSI 21 sharing vector 0x42 and IRQ 21 [ 57.876518] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 66 [ 57.876529] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 57.876533] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 57.876647] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 57.876674] uhci_hcd 0000:00:1d.0: irq 66, io base 0x00005000 [ 57.876755] usb usb1: configuration #1 chosen from 1 choice [ 57.876778] hub 1-0:1.0: USB hub found [ 57.876784] hub 1-0:1.0: 2 ports detected [ 57.895294] ieee1394: Initialized config rom entry `ip1394' [ 57.982348] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177 [ 57.982364] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 57.982372] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 57.982397] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 57.982425] uhci_hcd 0000:00:1d.1: irq 177, io base 0x00005400 [ 57.982502] usb usb2: configuration #1 chosen from 1 choice [ 57.982523] hub 2-0:1.0: USB hub found [ 57.982530] hub 2-0:1.0: 2 ports detected [ 58.086271] GSI 22 sharing vector 0x4A and IRQ 22 [ 58.086274] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 74 [ 58.086282] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 58.086286] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 58.086310] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 58.086334] uhci_hcd 0000:00:1d.2: irq 74, io base 0x00005800 [ 58.086408] usb usb3: configuration #1 chosen from 1 choice [ 58.086428] hub 3-0:1.0: USB hub found [ 58.086434] hub 3-0:1.0: 2 ports detected [ 58.190235] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 [ 58.190243] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 58.190247] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 58.190270] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 58.190293] uhci_hcd 0000:00:1d.3: irq 58, io base 0x00006000 [ 58.190369] usb usb4: configuration #1 chosen from 1 choice [ 58.190388] hub 4-0:1.0: USB hub found [ 58.190394] hub 4-0:1.0: 2 ports detected [ 58.222623] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 58.294249] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 66 [ 58.294789] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 58.294796] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 58.294851] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 58.294889] ehci_hcd 0000:00:1d.7: debug port 1 [ 58.294896] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 58.294904] ehci_hcd 0000:00:1d.7: irq 66, io mem 0xdfbff800 [ 58.298787] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 58.298854] usb usb5: configuration #1 chosen from 1 choice [ 58.298884] hub 5-0:1.0: USB hub found [ 58.298892] hub 5-0:1.0: 8 ports detected [ 58.402951] GSI 23 sharing vector 0x52 and IRQ 23 [ 58.402955] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 82 [ 58.416126] Probing IDE interface ide2... [ 58.454961] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[82] MMIO=[dfcfb800-dfcfbfff] Max Pa cket=[2048] IR/IT contexts=[4/8] [ 58.754499] usb 1-1: device not accepting address 2, error -71 [ 59.002934] Attempting manual resume [ 59.024065] kjournald starting. Commit interval 5 seconds [ 59.024075] EXT3-fs: mounted filesystem with ordered data mode. [ 59.623294] usb 5-3: new high speed USB device using ehci_hcd and address 3 [ 59.727504] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800005816eb] [ 59.783440] usb 5-3: configuration #1 chosen from 1 choice [ 60.395764] usb 1-1: new full speed USB device using uhci_hcd and address 4 [ 60.565779] usb 1-1: configuration #1 chosen from 1 choice [ 60.571739] hub 1-1:1.0: USB hub found [ 60.573719] hub 1-1:1.0: 2 ports detected [ 60.919819] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 61.088314] usb 3-1: configuration #1 chosen from 1 choice [ 61.335775] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 61.582134] usb 3-2: configuration #1 chosen from 1 choice [ 61.788270] usb 1-1.1: new low speed USB device using uhci_hcd and address 5 [ 61.935264] usb 1-1.1: configuration #1 chosen from 1 choice [ 67.689330] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 67.694614] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 67.915347] printk: 62 messages suppressed. [ 67.915352] Buffer I/O error on device sdc1, logical block 629137280 [ 67.915371] Buffer I/O error on device sdc1, logical block 629137281 [ 67.953552] sata_sil24 0000:02:00.0: version 0.23 [ 67.953575] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177 [ 67.954467] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 67.954516] ata5: SATA max UDMA/100 cmd 0xFFFFC200000A8000 ctl 0x0 bmdma 0x0 irq 177 [ 67.954538] ata6: SATA max UDMA/100 cmd 0xFFFFC200000AA000 ctl 0x0 bmdma 0x0 irq 177 [ 68.159910] ata5: SATA link down (SStatus 0) [ 68.159915] scsi4 : sata_sil24 [ 68.302767] Floppy drive(s): fd0 is 1.44M [ 68.337202] FDC 0 is a post-1991 82077 [ 68.363433] ata6: SATA link down (SStatus 0) [ 68.363439] scsi5 : sata_sil24 [ 68.378645] gameport: EMU10K1 is pci0000:01:01.1/gameport0, io 0x8800, speed 904kHz [ 68.378715] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 21 (level, low) -> IRQ 82 [ 68.379083] skge 1.5 addr 0xdfcfc000 irq 82 chip Yukon-Lite rev 9 [ 68.379217] skge eth0: addr 00:13:d4:99:1c:c7 [ 68.652005] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 [ 68.652009] Copyright (c) 1999-2006 Intel Corporation. [ 68.652082] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 68.652099] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 68.667510] parport: PnPBIOS parport detected. [ 68.667622] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DM A] [ 68.721816] parport0: Printer, HEWLETT-PACKARD DESKJET 710C [ 68.729107] e1000: 0000:03:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:d4:99:13:de [ 68.729575] input: PC Speaker as /class/input/input1 [ 68.747805] usbcore: registered new driver hiddev [ 68.805558] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 68.866702] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 68.866743] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 68.866778] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 68.991154] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 225 [ 68.991180] Model 1002 Rev 00000000 Serial 10021102 [ 69.073944] hw_random: RNG not detected [ 70.277911] hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q5 .I USB FW:q5] on usb-0000:00:1d.2-2 [ 70.300214] input: Logitech USB Receiver as /class/input/input2 [ 70.300240] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1 [ 70.336194] input: Logitech USB Receiver as /class/input/input3 [ 70.336249] input,hiddev97: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1 [ 70.336261] usbcore: registered new driver usbhid [ 70.336264] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 70.336397] usbcore: registered new driver snd-usb-audio [ 70.401124] ts: Compaq touchscreen protocol output [ 70.581879] lp0: using parport0 (interrupt-driven). [ 70.629459] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 70.629464] ieee1394: sbp2: Try serialize_io=0 for better performance [ 70.694731] Adding 3036244k swap on /dev/disk/by-uuid/f76f8243-d797-4a21-885c-69345c56666b. Pr iority:-1 extents:1 across:3036244k [ 70.809503] EXT3 FS on sda3, internal journal [ 70.980575] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 70.980579] md: bitmap version 4.39 [ 71.093357] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: