[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 (Ubuntu 2.6.31-15.50-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffe5600 (reserved) [ 0.000000] BIOS-e820: 000000003ffe5600 - 000000003fff8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0FEDA0000 mask FFFFE0000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] modified: 000000003ffd0000 - 000000003ffe5600 (reserved) [ 0.000000] modified: 000000003ffe5600 - 000000003fff8000 (ACPI NVS) [ 0.000000] modified: 000000003fff8000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 378a4000 - 37fef8d4 [ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff88d4 [ 0.000000] Move RAMDISK from 00000000378a4000 - 0000000037fef8d3 to 008ad000 - 00ff88d3 [ 0.000000] ACPI: RSDP 000f7c40 00014 (v00 HP ) [ 0.000000] ACPI: RSDT 3ffe5684 00040 (v01 HP 30A3 14060620 HP 00000001) [ 0.000000] ACPI: FACP 3ffe5600 00084 (v02 HP 30A3 00000002 HP 00000001) [ 0.000000] ACPI: DSDT 3ffe579c 0F8F5 (v01 HP nc8430 00010000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3fff7e80 00040 [ 0.000000] ACPI: APIC 3ffe56c4 00068 (v01 HP 30A3 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 3ffe572c 0003C (v01 HP 30A3 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 3ffe5768 00032 (v02 HP 30A3 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 3fff5091 00059 (v01 HP HPQNLP 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 3fff50ea 0035C (v01 HP HPQSAT 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 3fff5919 004E7 (v01 HP CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac160] BRK ==> [00008a9000 - 00008ac160] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0000ff88d4] NEW RAMDISK ==> [00008ad000 - 0000ff88d4] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ffd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffd0 [ 0.000000] On node 0 totalpages: 261995 [ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34498 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259947 [ 0.000000] Kernel command line: root=UUID=20a5ffb2-9c31-49af-89ea-7c4394146d3c ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5241920 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffd0) [ 0.000000] Memory: 1018012k/1048384k available (4566k kernel code, 29596k reserved, 2142k data, 540k init, 139080k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575b44 - 0xc078d3c8 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575b44 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.999 MHz processor. [ 0.002530] Console: colour VGA+ 80x25 [ 0.002533] console [tty0] enabled [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.99 BogoMIPS (lpj=7979996) [ 0.004029] Security Framework initialized [ 0.004048] AppArmor: AppArmor initialized [ 0.004055] Mount-cache hash table entries: 512 [ 0.004170] Initializing cgroup subsys ns [ 0.004175] Initializing cgroup subsys cpuacct [ 0.004179] Initializing cgroup subsys memory [ 0.004186] Initializing cgroup subsys freezer [ 0.004188] Initializing cgroup subsys net_cls [ 0.004201] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004204] CPU: L2 cache: 2048K [ 0.004207] CPU: Physical Processor ID: 0 [ 0.004209] CPU: Processor Core ID: 0 [ 0.004212] mce: CPU supports 6 MCE banks [ 0.004221] CPU0: Thermal monitoring handled by SMI [ 0.004224] using mwait in idle threads. [ 0.004230] Performance Counters: no PMU driver, software counters only. [ 0.004235] Checking 'hlt' instruction... OK. [ 0.022986] ACPI: Core revision 20090521 [ 0.044434] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086577] CPU0: Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3990.33 BogoMIPS (lpj=7980675) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.172486] CPU1: Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [ 0.172503] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.176024] Brought up 2 CPUs [ 0.176027] Total of 2 processors activated (7980.33 BogoMIPS). [ 0.176083] CPU0 attaching sched-domain: [ 0.176086] domain 0: span 0-1 level MC [ 0.176089] groups: 0 1 [ 0.176095] CPU1 attaching sched-domain: [ 0.176097] domain 0: span 0-1 level MC [ 0.176100] groups: 1 0 [ 0.176185] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.176185] Booting paravirtualized kernel on bare hardware [ 0.176219] regulator: core version 0.5 [ 0.176219] Time: 17:56:13 Date: 11/11/09 [ 0.176219] NET: Registered protocol family 16 [ 0.176231] EISA bus registered [ 0.176242] ACPI: bus type pci registered [ 0.176314] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.176318] PCI: Not using MMCONFIG. [ 0.177418] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 [ 0.177421] PCI: Using configuration type 1 for base access [ 0.178490] bio: create slab at 0 [ 0.180910] ACPI: EC: Look up EC in DSDT [ 0.272019] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.292255] ACPI: Interpreter enabled [ 0.292263] ACPI: (supports S0 S3 S4 S5) [ 0.292281] ACPI: Using IOAPIC for interrupt routing [ 0.292333] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.301442] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources [ 0.301445] PCI: Using MMCONFIG for extended config space [ 0.312076] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.312079] ACPI: EC: driver started in interrupt mode [ 0.312265] ACPI: Power Resource [C1EA] (on) [ 0.312415] ACPI: Power Resource [C1F7] (on) [ 0.312457] ACPI: Power Resource [C20D] (on) [ 0.312503] ACPI: Power Resource [C215] (off) [ 0.312594] ACPI: Power Resource [C308] (off) [ 0.312681] ACPI: Power Resource [C309] (off) [ 0.312768] ACPI: Power Resource [C30A] (off) [ 0.312854] ACPI: Power Resource [C30B] (off) [ 0.312940] ACPI: Power Resource [C30C] (off) [ 0.313029] ACPI: Power Resource [C30D] (off) [ 0.313069] ACPI: Power Resource [C30E] (off) [ 0.313411] ACPI: No dock devices found. [ 0.317696] ACPI: PCI Root Bridge [C002] (0000:00) [ 0.317806] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.317810] pci 0000:00:01.0: PME# disabled [ 0.317901] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4700000-0xf4703fff] [ 0.317962] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.317968] pci 0000:00:1b.0: PME# disabled [ 0.318054] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.318059] pci 0000:00:1c.0: PME# disabled [ 0.318148] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.318153] pci 0000:00:1c.1: PME# disabled [ 0.318244] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.318249] pci 0000:00:1c.3: PME# disabled [ 0.318316] pci 0000:00:1d.0: reg 20 io port: [0x5000-0x501f] [ 0.318380] pci 0000:00:1d.1: reg 20 io port: [0x5020-0x503f] [ 0.318445] pci 0000:00:1d.2: reg 20 io port: [0x5040-0x505f] [ 0.318510] pci 0000:00:1d.3: reg 20 io port: [0x5060-0x507f] [ 0.318579] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4704000-0xf47043ff] [ 0.318642] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.318648] pci 0000:00:1d.7: PME# disabled [ 0.318818] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.318825] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.318830] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO [ 0.318834] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.318843] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007) [ 0.318897] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.318906] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.318914] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.318923] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.318931] pci 0000:00:1f.1: reg 20 io port: [0x5080-0x508f] [ 0.318996] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7] [ 0.319004] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7] [ 0.319013] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377] [ 0.319021] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577] [ 0.319030] pci 0000:00:1f.2: reg 20 io port: [0x50b0-0x50bf] [ 0.319038] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4705000-0xf47053ff] [ 0.319076] pci 0000:00:1f.2: PME# supported from D3hot [ 0.319081] pci 0000:00:1f.2: PME# disabled [ 0.319152] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff] [ 0.319163] pci 0000:01:00.0: reg 14 io port: [0x4000-0x40ff] [ 0.319174] pci 0000:01:00.0: reg 18 32bit mmio: [0xf4600000-0xf460ffff] [ 0.319204] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.319243] pci 0000:01:00.0: supports D1 D2 [ 0.319310] pci 0000:00:01.0: bridge io port: [0x4000-0x4fff] [ 0.319314] pci 0000:00:01.0: bridge 32bit mmio: [0xf4600000-0xf46fffff] [ 0.319319] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.319400] pci 0000:08:00.0: reg 10 64bit mmio: [0xf4100000-0xf410ffff] [ 0.319497] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.319503] pci 0000:08:00.0: PME# disabled [ 0.319579] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4100000-0xf41fffff] [ 0.319730] pci 0000:10:00.0: reg 10 32bit mmio: [0xf4000000-0xf4000fff] [ 0.319973] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.319986] pci 0000:10:00.0: PME# disabled [ 0.320107] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4000000-0xf40fffff] [ 0.320172] pci 0000:00:1c.3: bridge io port: [0x2000-0x3fff] [ 0.320178] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.320248] pci 0000:02:06.0: reg 10 32bit mmio: [0xf4200000-0xf4200fff] [ 0.320279] pci 0000:02:06.0: supports D1 D2 [ 0.320281] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.320288] pci 0000:02:06.0: PME# disabled [ 0.320341] pci 0000:02:06.1: reg 10 32bit mmio: [0xf4201000-0xf42017ff] [ 0.320351] pci 0000:02:06.1: reg 14 32bit mmio: [0xf4204000-0xf4207fff] [ 0.320420] pci 0000:02:06.1: supports D1 D2 [ 0.320422] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot [ 0.320429] pci 0000:02:06.1: PME# disabled [ 0.320481] pci 0000:02:06.2: reg 10 32bit mmio: [0xf4208000-0xf4208fff] [ 0.320556] pci 0000:02:06.2: supports D1 D2 [ 0.320559] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot [ 0.320565] pci 0000:02:06.2: PME# disabled [ 0.320617] pci 0000:02:06.3: reg 10 32bit mmio: [0xf4209000-0xf42090ff] [ 0.320692] pci 0000:02:06.3: supports D1 D2 [ 0.320694] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot [ 0.320700] pci 0000:02:06.3: PME# disabled [ 0.320753] pci 0000:02:06.4: reg 10 32bit mmio: [0xf420a000-0xf420afff] [ 0.320763] pci 0000:02:06.4: reg 14 32bit mmio: [0xf420b000-0xf420bfff] [ 0.320830] pci 0000:02:06.4: supports D1 D2 [ 0.320833] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot [ 0.320839] pci 0000:02:06.4: PME# disabled [ 0.320904] pci 0000:00:1e.0: transparent bridge [ 0.320912] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4200000-0xf45fffff] [ 0.320971] pci_bus 0000:00: on NUMA node 0 [ 0.320976] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] [ 0.321208] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C07E._PRT] [ 0.321269] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C093._PRT] [ 0.321383] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0FB._PRT] [ 0.321469] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C10B._PRT] [ 0.321555] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C111._PRT] [ 0.351208] ACPI: PCI Interrupt Link [C107] (IRQs *10 11) [ 0.351406] ACPI: PCI Interrupt Link [C108] (IRQs *10 11) [ 0.351600] ACPI: PCI Interrupt Link [C109] (IRQs 10 *11) [ 0.351795] ACPI: PCI Interrupt Link [C10A] (IRQs *10 11) [ 0.351989] ACPI: PCI Interrupt Link [C123] (IRQs *10 11) [ 0.352190] ACPI: PCI Interrupt Link [C124] (IRQs 10 *11) [ 0.352385] ACPI: PCI Interrupt Link [C125] (IRQs *10 11) [ 0.352474] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS 20090521 pci_link-182 [ 0.352710] SCSI subsystem initialized [ 0.352735] libata version 3.00 loaded. [ 0.352735] usbcore: registered new interface driver usbfs [ 0.352735] usbcore: registered new interface driver hub [ 0.352735] usbcore: registered new device driver usb [ 0.352735] ACPI: WMI: Mapper loaded [ 0.352735] PCI: Using ACPI for IRQ routing [ 0.364010] Bluetooth: Core ver 2.15 [ 0.364025] NET: Registered protocol family 31 [ 0.364025] Bluetooth: HCI device and connection manager initialized [ 0.364025] Bluetooth: HCI socket layer initialized [ 0.364025] NetLabel: Initializing [ 0.364025] NetLabel: domain hash size = 128 [ 0.364025] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.364038] NetLabel: unlabeled traffic allowed by default [ 0.364182] hpet clockevent registered [ 0.364186] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.364193] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.364199] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.380010] pnp: PnP ACPI init [ 0.380024] ACPI: bus type pnp registered [ 0.389081] alloc irq_desc for 23 on node -1 [ 0.389084] alloc kstat_irqs on node -1 [ 0.390662] pnp: PnP ACPI: found 15 devices [ 0.390665] ACPI: ACPI bus type pnp unregistered [ 0.390669] PnPBIOS: Disabled by ACPI PNP [ 0.390680] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.390683] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.390687] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved [ 0.390698] system 00:0b: ioport range 0x500-0x55f has been reserved [ 0.390701] system 00:0b: ioport range 0x800-0x80f has been reserved [ 0.390705] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.390708] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved [ 0.390715] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved [ 0.390718] system 00:0d: ioport range 0x1000-0x107f has been reserved [ 0.390722] system 00:0d: ioport range 0x1100-0x113f has been reserved [ 0.390725] system 00:0d: ioport range 0x1200-0x121f has been reserved [ 0.390728] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.390732] system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved [ 0.390735] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.390739] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.390742] system 00:0d: iomem range 0xfed90000-0xfed9afff has been reserved [ 0.390748] system 00:0e: iomem range 0xcfe00-0xcffff has been reserved [ 0.390752] system 00:0e: iomem range 0xfeda0000-0xfedbffff has been reserved [ 0.390755] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.425431] AppArmor: AppArmor Filesystem Enabled [ 0.425500] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.425504] pci 0000:00:01.0: IO window: 0x4000-0x4fff [ 0.425508] pci 0000:00:01.0: MEM window: 0xf4600000-0xf46fffff [ 0.425512] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.425518] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.425520] pci 0000:00:1c.0: IO window: disabled [ 0.425527] pci 0000:00:1c.0: MEM window: 0xf4100000-0xf41fffff [ 0.425532] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.425537] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 [ 0.425540] pci 0000:00:1c.1: IO window: disabled [ 0.425546] pci 0000:00:1c.1: MEM window: 0xf4000000-0xf40fffff [ 0.425551] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.425556] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20 [ 0.425560] pci 0000:00:1c.3: IO window: 0x2000-0x3fff [ 0.425567] pci 0000:00:1c.3: MEM window: 0xf0000000-0xf3ffffff [ 0.425572] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.425579] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.425582] pci 0000:02:06.0: IO window: 0x006000-0x0060ff [ 0.425589] pci 0000:02:06.0: IO window: 0x006400-0x0064ff [ 0.425595] pci 0000:02:06.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.425602] pci 0000:02:06.0: MEM window: 0x44000000-0x47ffffff [ 0.425608] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.425612] pci 0000:00:1e.0: IO window: 0x6000-0x6fff [ 0.425619] pci 0000:00:1e.0: MEM window: 0xf4200000-0xf45fffff [ 0.425624] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.425636] alloc irq_desc for 16 on node -1 [ 0.425638] alloc kstat_irqs on node -1 [ 0.425643] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.425647] pci 0000:00:01.0: setting latency timer to 64 [ 0.425656] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.425661] pci 0000:00:1c.0: setting latency timer to 64 [ 0.425670] alloc irq_desc for 17 on node -1 [ 0.425672] alloc kstat_irqs on node -1 [ 0.425676] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.425681] pci 0000:00:1c.1: setting latency timer to 64 [ 0.425690] alloc irq_desc for 19 on node -1 [ 0.425692] alloc kstat_irqs on node -1 [ 0.425696] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.425701] pci 0000:00:1c.3: setting latency timer to 64 [ 0.425709] pci 0000:00:1e.0: setting latency timer to 64 [ 0.425720] alloc irq_desc for 18 on node -1 [ 0.425722] alloc kstat_irqs on node -1 [ 0.425726] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.425734] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.425737] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.425740] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.425743] pci_bus 0000:01: resource 1 mem: [0xf4600000-0xf46fffff] [ 0.425746] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.425749] pci_bus 0000:08: resource 1 mem: [0xf4100000-0xf41fffff] [ 0.425752] pci_bus 0000:10: resource 1 mem: [0xf4000000-0xf40fffff] [ 0.425755] pci_bus 0000:20: resource 0 io: [0x2000-0x3fff] [ 0.425758] pci_bus 0000:20: resource 1 mem: [0xf0000000-0xf3ffffff] [ 0.425761] pci_bus 0000:02: resource 0 io: [0x6000-0x6fff] [ 0.425764] pci_bus 0000:02: resource 1 mem: [0xf4200000-0xf45fffff] [ 0.425767] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.425770] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.425773] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.425776] pci_bus 0000:03: resource 0 io: [0x6000-0x60ff] [ 0.425779] pci_bus 0000:03: resource 1 io: [0x6400-0x64ff] [ 0.425782] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.425785] pci_bus 0000:03: resource 3 mem: [0x44000000-0x47ffffff] [ 0.425824] NET: Registered protocol family 2 [ 0.425922] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.426240] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.426882] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.427209] TCP: Hash tables configured (established 131072 bind 65536) [ 0.427212] TCP reno registered [ 0.427311] NET: Registered protocol family 1 [ 0.427384] Trying to unpack rootfs image as initramfs... [ 0.632099] Freeing initrd memory: 7470k freed [ 0.636757] cpufreq-nforce2: No nForce2 chipset. [ 0.636789] Scanning for low memory corruption every 60 seconds [ 0.636917] audit: initializing netlink socket (disabled) [ 0.636936] type=2000 audit(1257962172.636:1): initialized [ 0.645715] highmem bounce pool size: 64 pages [ 0.645721] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.647369] VFS: Disk quotas dquot_6.5.2 [ 0.647432] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.648041] fuse init (API version 7.12) [ 0.648133] msgmni has been set to 1731 [ 0.648371] alg: No test for stdrng (krng) [ 0.648386] io scheduler noop registered [ 0.648388] io scheduler anticipatory registered [ 0.648391] io scheduler deadline registered [ 0.648440] io scheduler cfq registered (default) [ 0.648553] pci 0000:01:00.0: Boot video device [ 0.648684] alloc irq_desc for 24 on node -1 [ 0.648687] alloc kstat_irqs on node -1 [ 0.648697] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.648704] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.648823] alloc irq_desc for 25 on node -1 [ 0.648826] alloc kstat_irqs on node -1 [ 0.648835] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.648846] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.649001] alloc irq_desc for 26 on node -1 [ 0.649003] alloc kstat_irqs on node -1 [ 0.649012] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.649023] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.649175] alloc irq_desc for 27 on node -1 [ 0.649177] alloc kstat_irqs on node -1 [ 0.649186] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.649197] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.649307] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.649410] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.653003] ACPI: AC Adapter [C1B3] (on-line) [ 0.653076] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.653080] ACPI: Power Button [PWRF] [ 0.653150] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.653153] ACPI: Sleep Button [C237] [ 0.653199] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.653261] ACPI: Lid Switch [C22F] [ 0.653480] fan PNP0C0B:00: registered as cooling_device0 [ 0.653486] ACPI: Fan [C30F] (off) [ 0.653668] fan PNP0C0B:01: registered as cooling_device1 [ 0.653674] ACPI: Fan [C310] (off) [ 0.653849] fan PNP0C0B:02: registered as cooling_device2 [ 0.653855] ACPI: Fan [C311] (off) [ 0.654030] fan PNP0C0B:03: registered as cooling_device3 [ 0.654036] ACPI: Fan [C312] (off) [ 0.654216] fan PNP0C0B:04: registered as cooling_device4 [ 0.654223] ACPI: Fan [C313] (off) [ 0.654398] fan PNP0C0B:05: registered as cooling_device5 [ 0.654404] ACPI: Fan [C314] (off) [ 0.654485] fan PNP0C0B:06: registered as cooling_device6 [ 0.654491] ACPI: Fan [C315] (off) [ 0.655178] ACPI: SSDT 3fff54cf 001EA (v01 HP Cpu0Ist 00003000 INTL 20050624) [ 0.655634] ACPI: SSDT 3fff573e 001DB (v01 HP Cpu0Cst 00003001 INTL 20050624) [ 0.656192] Marking TSC unstable due to TSC halts in idle [ 0.656214] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.656234] processor LNXCPU:00: registered as cooling_device7 [ 0.656238] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.656581] ACPI: SSDT 3fff5446 00089 (v01 HP Cpu1Ist 00003000 INTL 20050624) [ 0.656978] ACPI: SSDT 3fff56b9 00085 (v01 HP Cpu1Cst 00003000 INTL 20050624) [ 0.657587] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 0.657611] processor LNXCPU:01: registered as cooling_device8 [ 0.657615] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.660230] Switched to high resolution mode on CPU 1 [ 0.660238] Switched to high resolution mode on CPU 0 [ 0.666829] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.666838] ACPI: Thermal Zone [TZ0] (50 C) [ 0.690378] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.690386] ACPI: Thermal Zone [TZ1] (47 C) [ 0.714225] thermal LNXTHERM:03: registered as thermal_zone2 [ 0.714234] ACPI: Thermal Zone [TZ2] (54 C) [ 0.723268] thermal LNXTHERM:04: registered as thermal_zone3 [ 0.723277] ACPI: Thermal Zone [TZ3] (26 C) [ 0.726978] thermal LNXTHERM:05: registered as thermal_zone4 [ 0.726987] ACPI: Thermal Zone [TZ4] (55 C) [ 0.727055] isapnp: Scanning for PnP cards... [ 0.818543] ACPI: Battery Slot [C1B5] (battery present) [ 0.818709] ACPI: Battery Slot [C1B4] (battery absent) [ 1.082299] isapnp: No Plug & Play device found [ 1.083450] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.083588] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.083917] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.085183] brd: module loaded [ 1.085682] loop: module loaded [ 1.085754] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.085831] ahci 0000:00:1f.2: version 3.0 [ 1.085847] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.085883] alloc irq_desc for 28 on node -1 [ 1.085885] alloc kstat_irqs on node -1 [ 1.085896] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 1.085945] ahci: SSS flag set, parallel bus scan disabled [ 1.085973] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.085977] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 1.085983] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.086115] scsi0 : ahci [ 1.086216] scsi1 : ahci [ 1.086288] scsi2 : ahci [ 1.086359] scsi3 : ahci [ 1.086435] ata1: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705100 irq 28 [ 1.086437] ata2: DUMMY [ 1.086439] ata3: DUMMY [ 1.086441] ata4: DUMMY [ 1.086494] ata_piix 0000:00:1f.1: version 2.13 [ 1.086503] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.086540] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.086620] scsi4 : ata_piix [ 1.086688] scsi5 : ata_piix [ 1.087173] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14 [ 1.087176] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15 [ 1.088155] Fixed MDIO Bus: probed [ 1.088192] PPP generic driver version 2.4.2 [ 1.088282] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.088302] alloc irq_desc for 20 on node -1 [ 1.088304] alloc kstat_irqs on node -1 [ 1.088310] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.088321] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.088325] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.088379] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.092296] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.092303] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.092319] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4704000 [ 1.096427] ata6: port disabled. ignoring. [ 1.108019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.108114] usb usb1: configuration #1 chosen from 1 choice [ 1.108146] hub 1-0:1.0: USB hub found [ 1.108154] hub 1-0:1.0: 8 ports detected [ 1.108228] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.108248] uhci_hcd: USB Universal Host Controller Interface driver [ 1.108273] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.108280] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.108284] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.108314] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.108342] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000 [ 1.108428] usb usb2: configuration #1 chosen from 1 choice [ 1.108455] hub 2-0:1.0: USB hub found [ 1.108462] hub 2-0:1.0: 2 ports detected [ 1.108511] alloc irq_desc for 21 on node -1 [ 1.108514] alloc kstat_irqs on node -1 [ 1.108518] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.108526] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.108530] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.108565] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.108600] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00005020 [ 1.108678] usb usb3: configuration #1 chosen from 1 choice [ 1.108705] hub 3-0:1.0: USB hub found [ 1.108711] hub 3-0:1.0: 2 ports detected [ 1.108760] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.108767] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.108770] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.108800] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.108834] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040 [ 1.108913] usb usb4: configuration #1 chosen from 1 choice [ 1.108943] hub 4-0:1.0: USB hub found [ 1.108953] hub 4-0:1.0: 2 ports detected [ 1.109002] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.109009] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.109013] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.109048] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.109082] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060 [ 1.109162] usb usb5: configuration #1 chosen from 1 choice [ 1.109192] hub 5-0:1.0: USB hub found [ 1.109198] hub 5-0:1.0: 2 ports detected [ 1.109305] PNP: PS/2 Controller [PNP0303:C20A,PNP0f13:C20B] at 0x60,0x64 irq 1,12 [ 1.111150] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.111909] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.111915] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.111919] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.111922] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.111925] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.112013] mice: PS/2 mouse device common for all mice [ 1.112155] rtc_cmos 00:08: RTC can wake from S4 [ 1.112188] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.112220] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.112332] device-mapper: uevent: version 1.0.3 [ 1.112435] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.112545] device-mapper: multipath: version 1.1.0 loaded [ 1.112549] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.112684] EISA: Probing bus 0 at eisa.0 [ 1.112691] Cannot allocate resource for EISA slot 1 [ 1.112694] Cannot allocate resource for EISA slot 2 [ 1.112696] Cannot allocate resource for EISA slot 3 [ 1.112698] Cannot allocate resource for EISA slot 4 [ 1.112701] Cannot allocate resource for EISA slot 5 [ 1.112703] Cannot allocate resource for EISA slot 6 [ 1.112714] EISA: Detected 0 cards. [ 1.112906] cpuidle: using governor ladder [ 1.113019] cpuidle: using governor menu [ 1.113531] TCP cubic registered [ 1.113708] NET: Registered protocol family 10 [ 1.114174] lo: Disabled Privacy Extensions [ 1.114516] NET: Registered protocol family 17 [ 1.114533] Bluetooth: L2CAP ver 2.13 [ 1.114535] Bluetooth: L2CAP socket layer initialized [ 1.114538] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.114540] Bluetooth: SCO socket layer initialized [ 1.114584] Bluetooth: RFCOMM TTY layer initialized [ 1.114588] Bluetooth: RFCOMM socket layer initialized [ 1.114590] Bluetooth: RFCOMM ver 1.11 [ 1.114910] Using IPI No-Shortcut mode [ 1.114981] PM: Resume from disk failed. [ 1.114994] registered taskstats version 1 [ 1.115119] Magic number: 1:551:946 [ 1.115143] tty tty3: hash matches [ 1.115228] rtc_cmos 00:08: setting system clock to 2009-11-11 17:56:14 UTC (1257962174) [ 1.115231] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.115233] EDD information not available. [ 1.134179] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.276437] ata5.00: ATAPI: TSSTcorpCDW/DVD TS-L462C, HP10, max MWDMA2 [ 1.324374] ata5.00: configured for MWDMA2 [ 1.568065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.569235] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 1.569327] ata1.00: ATA-7: ST9120822AS, 3.ALC, max UDMA/133 [ 1.569334] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.570663] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 1.570802] ata1.00: configured for UDMA/133 [ 1.584263] scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.AL PQ: 0 ANSI: 5 [ 1.584463] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.584508] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.584559] sd 0:0:0:0: [sda] Write Protect is off [ 1.584562] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.584589] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.584727] sda: sda1 sda2 < [ 1.604910] scsi 4:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462C HP10 PQ: 0 ANSI: 5 [ 1.620075] sda5 > [ 1.620493] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.685162] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.685168] Uniform CD-ROM driver Revision: 3.20 [ 1.685312] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.685392] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.685478] Freeing unused kernel memory: 540k freed [ 1.685857] Write protecting the kernel text: 4568k [ 1.685913] Write protecting the kernel read-only data: 1836k [ 1.803925] Linux agpgart interface v0.103 [ 1.847197] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 1.858727] [drm] Initialized drm 1.1.0 20060810 [ 1.905386] [drm] radeon default to kernel modesetting DISABLED. [ 1.905959] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.905970] pci 0000:01:00.0: setting latency timer to 64 [ 1.906159] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 1.910812] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input5 [ 1.910859] ACPI: Video Device [C12E] (multi-head: yes rom: no post: no) [ 1.915573] tg3.c:v3.99 (April 20, 2009) [ 1.915597] tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.915609] tg3 0000:08:00.0: setting latency timer to 64 [ 1.924601] tg3 0000:08:00.0: wake-up capability disabled by ACPI [ 1.924610] tg3 0000:08:00.0: PME# disabled [ 1.934991] ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.961326] eth0: Tigon3 [partno(BCM95751M) rev 4201] (PCI Express) MAC address 00:15:60:c3:af:29 [ 1.961330] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.961334] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.961336] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.988078] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f4201000-f42017ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.020109] usb 2-1: configuration #1 chosen from 1 choice [ 2.260050] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.425745] usb 3-1: configuration #1 chosen from 1 choice [ 2.668063] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 2.844040] usb 4-2: configuration #1 chosen from 1 choice [ 2.853111] usbcore: registered new interface driver hiddev [ 2.866343] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input6 [ 2.866432] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0 [ 2.866447] usbcore: registered new interface driver usbhid [ 2.866450] usbhid: v2.6:USB HID core driver [ 2.952271] PM: Starting manual resume from disk [ 2.952275] PM: Resume from partition 8:5 [ 2.952278] PM: Checking hibernation image. [ 2.952426] PM: Resume from disk failed. [ 3.009394] kjournald starting. Commit interval 5 seconds [ 3.009415] EXT3-fs: mounted filesystem with writeback data mode. [ 4.250900] type=1505 audit(1257962177.634:2): operation="profile_load" pid=453 name=/usr/share/gdm/guest-session/Xsession [ 4.268367] type=1505 audit(1257962177.652:3): operation="profile_load" pid=454 name=/sbin/dhclient3 [ 4.269024] type=1505 audit(1257962177.652:4): operation="profile_load" pid=454 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.269381] type=1505 audit(1257962177.652:5): operation="profile_load" pid=454 name=/usr/lib/connman/scripts/dhclient-script [ 4.319766] type=1505 audit(1257962177.701:6): operation="profile_load" pid=455 name=/usr/bin/evince [ 4.330432] type=1505 audit(1257962177.712:7): operation="profile_load" pid=455 name=/usr/bin/evince-previewer [ 4.336672] type=1505 audit(1257962177.720:8): operation="profile_load" pid=455 name=/usr/bin/evince-thumbnailer [ 4.361795] type=1505 audit(1257962177.744:9): operation="profile_load" pid=457 name=/usr/lib/cups/backend/cups-pdf [ 6.023999] Adding 3020180k swap on /dev/sda5. Priority:-1 extents:1 across:3020180k [ 6.787161] EXT3 FS on sda1, internal journal [ 10.177554] udev: starting version 147 [ 11.042143] __ratelimit: 9 callbacks suppressed [ 11.042147] type=1505 audit(1257962184.424:13): operation="profile_replace" pid=734 name=/usr/share/gdm/guest-session/Xsession [ 11.043849] type=1505 audit(1257962184.424:14): operation="profile_replace" pid=735 name=/sbin/dhclient3 [ 11.044504] type=1505 audit(1257962184.428:15): operation="profile_replace" pid=735 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 11.044862] type=1505 audit(1257962184.428:16): operation="profile_replace" pid=735 name=/usr/lib/connman/scripts/dhclient-script [ 11.049475] type=1505 audit(1257962184.432:17): operation="profile_replace" pid=736 name=/usr/bin/evince [ 11.060852] type=1505 audit(1257962184.444:18): operation="profile_replace" pid=736 name=/usr/bin/evince-previewer [ 11.067194] type=1505 audit(1257962184.448:19): operation="profile_replace" pid=736 name=/usr/bin/evince-thumbnailer [ 11.077325] type=1505 audit(1257962184.460:20): operation="profile_replace" pid=738 name=/usr/lib/cups/backend/cups-pdf [ 11.078098] type=1505 audit(1257962184.460:21): operation="profile_replace" pid=738 name=/usr/sbin/cupsd [ 11.173593] type=1505 audit(1257962184.556:22): operation="profile_replace" pid=739 name=/usr/sbin/ntpd [ 12.178551] parport_pc 00:03: reported by Plug and Play ACPI [ 12.178634] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 12.270784] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 12.270922] usbcore: registered new interface driver btusb [ 12.294048] lp0: using parport0 (interrupt-driven). [ 12.326201] cfg80211: Calling CRDA to update world regulatory domain [ 12.646987] tpm_inf_pnp 00:04: Found C1F9 with ID IFX0102 [ 12.647044] tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 12.649678] sdhci: Secure Digital Host Controller Interface driver [ 12.649681] sdhci: Copyright(c) Pierre Ossman [ 12.711570] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.713445] tifm_7xx1 0000:02:06.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.716707] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30a3] [ 12.716731] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions [ 12.716738] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI [ 12.716741] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI [ 12.716748] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01011b22, devctl 0x64 [ 12.719370] intel_rng: FWH not detected [ 12.753147] ppdev: user-space parallel port driver [ 12.795380] lis3lv02d: hardware type NC84x0 found. [ 12.799228] lis3lv02d: 2-byte sensor found [ 12.866962] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7 [ 12.867283] Registered led device: hp::hddprotect [ 12.867308] lis3lv02d driver loaded. [ 12.948727] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18 [ 12.948733] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 12.948738] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 12.948747] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 12.948751] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff: clean. [ 12.949009] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff [ 12.949024] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff [ 12.950505] sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0) [ 12.950528] alloc irq_desc for 22 on node -1 [ 12.950531] alloc kstat_irqs on node -1 [ 12.950539] sdhci-pci 0000:02:06.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 12.950637] Registered led device: mmc0:: [ 12.950677] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO [ 13.077086] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44793/0x300000 [ 13.077092] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 13.117427] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 13.960482] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 13.960486] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 13.960591] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 13.960606] iwl3945 0000:10:00.0: setting latency timer to 64 [ 14.029764] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 14.029768] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 14.029883] alloc irq_desc for 29 on node -1 [ 14.029885] alloc kstat_irqs on node -1 [ 14.029920] iwl3945 0000:10:00.0: irq 29 for MSI/MSI-X [ 14.387653] cfg80211: World regulatory domain updated: [ 14.387657] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.387660] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.387664] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.387667] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.387670] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.387673] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.861682] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 14.863827] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 14.864740] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 14.865503] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 14.866438] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 15.127399] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 15.699782] psmouse serio5: ID: 10 00 64 [ 16.412479] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 16.412493] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.412541] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 17.468296] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 17.943915] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.943919] Bluetooth: BNEP filters: protocol multicast [ 18.355557] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input10 [ 18.984842] Bridge firewalling registered [ 23.119596] tg3 0000:08:00.0: wake-up capability disabled by ACPI [ 23.119605] tg3 0000:08:00.0: PME# disabled [ 23.119690] alloc irq_desc for 30 on node -1 [ 23.119693] alloc kstat_irqs on node -1 [ 23.119709] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [ 23.315388] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.317174] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 24.355637] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9 [ 24.425866] Registered led device: iwl-phy0::radio [ 24.425958] Registered led device: iwl-phy0::assoc [ 24.425997] Registered led device: iwl-phy0::RX [ 24.426038] Registered led device: iwl-phy0::TX [ 24.437119] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 32.551093] [drm] Setting GART location based on new memory map [ 32.552734] [drm] Loading R500 Microcode [ 32.552794] [drm] Num pipes: 1 [ 32.552807] [drm] writeback test succeeded in 2 usecs [ 140.592020] wlan0: authenticate with AP 00:17:3f:55:04:4c [ 140.596209] wlan0: authenticated [ 140.596212] wlan0: associate with AP 00:17:3f:55:04:4c [ 140.598367] wlan0: RX AssocResp from 00:17:3f:55:04:4c (capab=0x411 status=0 aid=1) [ 140.598371] wlan0: associated [ 140.599925] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 151.584025] wlan0: no IPv6 routers present [ 160.202175] wlan0: deauthenticating by local choice (reason=3) [ 160.272453] wlan0: disassociating by local choice (reason=3) [ 183.168052] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 183.326316] usb 4-1: configuration #1 chosen from 1 choice [ 183.424528] Initializing USB Mass Storage driver... [ 183.426170] scsi6 : SCSI emulation for USB Mass Storage devices [ 183.426420] usb-storage: device found at 3 [ 183.426425] usb-storage: waiting for device to settle before scanning [ 183.426440] usbcore: registered new interface driver usb-storage [ 183.426448] USB Mass Storage support registered. [ 183.868091] usb 4-1: USB disconnect, address 3 [ 184.108057] usb 4-1: new full speed USB device using uhci_hcd and address 4 [ 184.266853] usb 4-1: configuration #1 chosen from 1 choice [ 184.290719] scsi9 : SCSI emulation for USB Mass Storage devices [ 184.295006] usb-storage: device found at 4 [ 184.295012] usb-storage: waiting for device to settle before scanning [ 184.330509] usbcore: registered new interface driver usbserial [ 184.330540] USB Serial support registered for generic [ 184.330637] usbcore: registered new interface driver usbserial_generic [ 184.330642] usbserial: USB Serial Driver core [ 184.350067] USB Serial support registered for GSM modem (1-port) [ 184.350168] option 4-1:1.0: GSM modem (1-port) converter detected [ 184.350318] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 184.350338] option 4-1:1.1: GSM modem (1-port) converter detected [ 184.350431] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 184.350465] usbcore: registered new interface driver option [ 184.350469] option: v0.7.2:USB Driver for GSM modems [ 189.293389] usb-storage: device scan complete [ 189.312561] scsi 9:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 189.335256] sr1: scsi-1 drive [ 189.335482] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 189.335628] sr 9:0:0:0: Attached scsi generic sg2 type 5 [ 191.007425] PPP BSD Compression module registered [ 191.028156] PPP Deflate Compression module registered [ 201.321428] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 201.330423] ISOFS: changing to secondary root [ 217.356066] CIFS VFS: No response for cmd 50 mid 13 [ 796.695234] option: option_instat_callback: error -108 [ 796.695434] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 796.695473] option 4-1:1.0: device disconnected [ 796.695601] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 796.695635] option 4-1:1.1: device disconnected [ 796.748242] VFS: busy inodes on changed media or resized disk sr1 [ 796.748960] usb 4-1: USB disconnect, address 4 [ 796.787286] scsi 9:0:0:0: rejecting I/O to dead device [ 806.650031] Registered led device: iwl-phy0::radio [ 806.650114] Registered led device: iwl-phy0::assoc [ 806.650149] Registered led device: iwl-phy0::RX [ 806.650183] Registered led device: iwl-phy0::TX [ 806.665635] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 819.401077] wlan0: authenticate with AP 00:17:3f:55:04:4c [ 819.403325] wlan0: authenticated [ 819.403331] wlan0: associate with AP 00:17:3f:55:04:4c [ 819.405839] wlan0: RX AssocResp from 00:17:3f:55:04:4c (capab=0x411 status=0 aid=1) [ 819.405847] wlan0: associated [ 819.407983] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 830.240045] wlan0: no IPv6 routers present [ 1887.791598] CE: hpet increasing min_delta_ns to 15000 nsec [ 3043.077083] CE: hpet increasing min_delta_ns to 22500 nsec [ 3222.926987] CE: hpet increasing min_delta_ns to 33750 nsec [ 4594.189740] wlan0: disassociating by local choice (reason=3) [ 4594.300427] wlan0: deauthenticating by local choice (reason=3) [ 4606.512064] usb 4-1: new full speed USB device using uhci_hcd and address 5 [ 4606.670355] usb 4-1: configuration #1 chosen from 1 choice [ 4606.675251] scsi10 : SCSI emulation for USB Mass Storage devices [ 4606.675484] usb-storage: device found at 5 [ 4606.675489] usb-storage: waiting for device to settle before scanning [ 4606.769155] usb 4-1: USB disconnect, address 5 [ 4607.504071] usb 4-1: new full speed USB device using uhci_hcd and address 6 [ 4607.663303] usb 4-1: configuration #1 chosen from 1 choice [ 4607.672300] option 4-1:1.0: GSM modem (1-port) converter detected [ 4607.672394] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 4607.675520] option 4-1:1.1: GSM modem (1-port) converter detected [ 4607.675610] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 4607.676236] scsi13 : SCSI emulation for USB Mass Storage devices [ 4607.676384] usb-storage: device found at 6 [ 4607.676386] usb-storage: waiting for device to settle before scanning [ 4612.674378] usb-storage: device scan complete [ 4612.677335] scsi 13:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 4612.702299] sr1: scsi-1 drive [ 4612.702527] sr 13:0:0:0: Attached scsi CD-ROM sr1 [ 4612.702658] sr 13:0:0:0: Attached scsi generic sg2 type 5 [ 4619.140188] CIFS VFS: No response for cmd 50 mid 146 [ 4621.527406] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 4621.533414] ISOFS: changing to secondary root [ 4870.144120] usb 4-1: USB disconnect, address 6 [ 4870.145978] option: option_instat_callback: error -108 [ 4870.146314] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4870.146354] option 4-1:1.0: device disconnected [ 4870.146584] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4870.146618] option 4-1:1.1: device disconnected [ 4870.264255] scsi 13:0:0:0: rejecting I/O to dead device [ 4892.530056] Registered led device: iwl-phy0::radio [ 4892.530139] Registered led device: iwl-phy0::assoc [ 4892.530175] Registered led device: iwl-phy0::RX [ 4892.530209] Registered led device: iwl-phy0::TX [ 4892.549057] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4905.326439] wlan0: authenticate with AP 00:17:3f:55:04:4c [ 4905.328906] wlan0: authenticated [ 4905.328913] wlan0: associate with AP 00:17:3f:55:04:4c [ 4905.331247] wlan0: RX AssocResp from 00:17:3f:55:04:4c (capab=0x411 status=0 aid=1) [ 4905.331254] wlan0: associated [ 4905.336498] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4916.040040] wlan0: no IPv6 routers present [ 5624.800060] usb 4-1: new full speed USB device using uhci_hcd and address 7 [ 5624.957973] usb 4-1: configuration #1 chosen from 1 choice [ 5624.968974] scsi14 : SCSI emulation for USB Mass Storage devices [ 5624.969400] usb 4-1: USB disconnect, address 7 [ 5624.969485] usb-storage: device found at 7 [ 5624.969489] usb-storage: waiting for device to settle before scanning [ 5625.793098] usb 4-1: new full speed USB device using uhci_hcd and address 8 [ 5625.955988] usb 4-1: configuration #1 chosen from 1 choice [ 5625.965047] option 4-1:1.0: GSM modem (1-port) converter detected [ 5625.965160] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 5625.968303] option 4-1:1.1: GSM modem (1-port) converter detected [ 5625.968399] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 5625.981503] scsi17 : SCSI emulation for USB Mass Storage devices [ 5625.983200] usb-storage: device found at 8 [ 5625.983204] usb-storage: waiting for device to settle before scanning [ 5630.982015] usb-storage: device scan complete [ 5630.984963] scsi 17:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 5631.012923] sr1: scsi-1 drive [ 5631.013159] sr 17:0:0:0: Attached scsi CD-ROM sr1 [ 5631.013421] sr 17:0:0:0: Attached scsi generic sg2 type 5 [ 5639.136087] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 5639.142073] ISOFS: changing to secondary root [ 5685.025171] wlan0: deauthenticating by local choice (reason=3) [ 5685.097503] wlan0: disassociating by local choice (reason=3) [ 5715.140070] CIFS VFS: No response for cmd 50 mid 177 [ 5816.760113] usb 4-1: USB disconnect, address 8 [ 5816.761814] option: option_instat_callback: error -108 [ 5816.762155] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 5816.762194] option 4-1:1.0: device disconnected [ 5816.762442] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 5816.762477] option 4-1:1.1: device disconnected [ 5816.779910] scsi 17:0:0:0: rejecting I/O to dead device [ 5827.168060] usb 4-1: new full speed USB device using uhci_hcd and address 9 [ 5827.325155] usb 4-1: configuration #1 chosen from 1 choice [ 5827.338176] scsi18 : SCSI emulation for USB Mass Storage devices [ 5827.338463] usb 4-1: USB disconnect, address 9 [ 5827.338578] usb-storage: device found at 9 [ 5827.338582] usb-storage: waiting for device to settle before scanning [ 5828.160068] usb 4-1: new full speed USB device using uhci_hcd and address 10 [ 5828.321156] usb 4-1: configuration #1 chosen from 1 choice [ 5828.342370] option 4-1:1.0: GSM modem (1-port) converter detected [ 5828.342535] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 5828.348308] option 4-1:1.1: GSM modem (1-port) converter detected [ 5828.348462] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 5828.349179] scsi21 : SCSI emulation for USB Mass Storage devices [ 5828.349428] usb-storage: device found at 10 [ 5828.349433] usb-storage: waiting for device to settle before scanning [ 5833.351185] usb-storage: device scan complete [ 5833.355508] scsi 21:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 5833.379108] sr1: scsi-1 drive [ 5833.379351] sr 21:0:0:0: Attached scsi CD-ROM sr1 [ 5833.379482] sr 21:0:0:0: Attached scsi generic sg2 type 5 [ 5841.151210] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 5841.157215] ISOFS: changing to secondary root [ 5868.592113] usb 4-1: USB disconnect, address 10 [ 5868.593582] option: option_instat_callback: error -108 [ 5868.593918] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 5868.593962] option 4-1:1.0: device disconnected [ 5868.594191] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 5868.594223] option 4-1:1.1: device disconnected [ 5868.614043] scsi 21:0:0:0: rejecting I/O to dead device [ 5874.220943] Registered led device: iwl-phy0::radio [ 5874.220968] Registered led device: iwl-phy0::assoc [ 5874.221027] Registered led device: iwl-phy0::RX [ 5874.221048] Registered led device: iwl-phy0::TX [ 5874.234624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5887.005500] wlan0: authenticate with AP 00:17:3f:55:04:4c [ 5887.007440] wlan0: authenticated [ 5887.007446] wlan0: associate with AP 00:17:3f:55:04:4c [ 5887.009722] wlan0: RX AssocResp from 00:17:3f:55:04:4c (capab=0x411 status=0 aid=1) [ 5887.009728] wlan0: associated [ 5887.011706] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5897.520034] wlan0: no IPv6 routers present