[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-2-generic (buildd@yellow) (gcc version 4.4.2 (Ubuntu 4.4.2-1ubuntu1) ) #2-Ubuntu SMP Sat Oct 31 17:06:33 UTC 2009 (Ubuntu 2.6.32-2.2-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-2-generic root=UUID=28c78af4-b87f-4933-a7f1-5cd14539f9df ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-back [ 0.000000] E0000-E3FFF write-protect [ 0.000000] E4000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] modified: 00000000bffb0000 - 00000000bffbe000 (ACPI data) [ 0.000000] modified: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] modified: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bffb0000 page 4k [ 0.000000] kernel direct mapping tables up to bffb0000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000 [ 0.000000] RAMDISK: 3778f000 - 37fefe4f [ 0.000000] ACPI: RSDP 00000000000fb120 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bffb0000 00038 (v01 A_M_I_ OEMRSDT 01000822 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bffb0200 00084 (v02 A_M_I_ OEMFACP 01000822 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bffb05b0 069CB (v01 A0789 A0789000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bffbe000 00040 [ 0.000000] ACPI: APIC 00000000bffb0390 0005C (v01 A_M_I_ OEMAPIC 01000822 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bffb03f0 0003C (v01 A_M_I_ OEMMCFG 01000822 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bffbe040 00061 (v01 A_M_I_ AMI_OEM 01000822 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bffb6f80 00038 (v01 A_M_I_ OEMHPET 01000822 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [0000000000014000 - 0000000000018fff] [ 0.000000] bootmap [0000000000019000 - 0000000000040fff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2e044] TEXT DATA BSS ==> [0001000000 - 0001a2e044] [ 0.000000] #3 [003778f000 - 0037fefe4f] RAMDISK ==> [003778f000 - 0037fefe4f] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a2f000 - 0001a2f258] BRK ==> [0001a2f000 - 0001a2f258] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffb0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048383 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3824 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767976 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffbe000 [ 0.000000] PM: Registered nosave memory: 00000000bffbe000 - 00000000bfff0000 [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91672 r8192 d23016 u1048576 [ 0.000000] pcpu-alloc: s91672 r8192 d23016 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030360 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-2-generic root=UUID=28c78af4-b87f-4933-a7f1-5cd14539f9df ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4050740k/5242880k available (5455k kernel code, 1049348k absent, 142792k reserved, 3137k data, 688k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2394.009 MHz processor. [ 0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.01 BogoMIPS (lpj=23940090) [ 0.010037] Security Framework initialized [ 0.010060] AppArmor: AppArmor initialized [ 0.010371] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012632] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013728] Mount-cache hash table entries: 256 [ 0.013880] Initializing cgroup subsys ns [ 0.013886] Initializing cgroup subsys cpuacct [ 0.013889] Initializing cgroup subsys memory [ 0.013898] Initializing cgroup subsys freezer [ 0.013900] Initializing cgroup subsys net_cls [ 0.013921] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.013922] CPU: L2 cache: 3072K [ 0.013925] CPU 0/0x0 -> Node 0 [ 0.013927] CPU: Physical Processor ID: 0 [ 0.013929] CPU: Processor Core ID: 0 [ 0.013932] mce: CPU supports 6 MCE banks [ 0.013940] CPU0: Thermal monitoring enabled (TM2) [ 0.013945] using mwait in idle threads. [ 0.013946] Performance Events: Core2 events, Intel PMU driver. [ 0.013952] ... version: 2 [ 0.013953] ... bit width: 40 [ 0.013955] ... generic registers: 2 [ 0.013956] ... value mask: 000000ffffffffff [ 0.013957] ... max period: 000000007fffffff [ 0.013959] ... fixed-purpose events: 3 [ 0.013960] ... event mask: 0000000700000003 [ 0.016357] ACPI: Core revision 20090903 [ 0.025914] Setting APIC routing to flat [ 0.026226] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.126246] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] Calibrating delay using timer specific routine.. 4787.98 BogoMIPS (lpj=23939906) [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 3072K [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] mce: CPU supports 6 MCE banks [ 0.020000] CPU1: Thermal monitoring enabled (TM2) [ 0.280094] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.280101] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.290019] Brought up 2 CPUs [ 0.290021] Total of 2 processors activated (9575.99 BogoMIPS). [ 0.290574] CPU0 attaching sched-domain: [ 0.290577] domain 0: span 0-1 level MC [ 0.290579] groups: 0 1 [ 0.290585] CPU1 attaching sched-domain: [ 0.290586] domain 0: span 0-1 level MC [ 0.290588] groups: 1 0 [ 0.290675] regulator: core version 0.5 [ 0.290675] Time: 22:28:01 Date: 11/09/09 [ 0.290675] NET: Registered protocol family 16 [ 0.290675] ACPI: bus type pci registered [ 0.290675] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.290675] PCI: Not using MMCONFIG. [ 0.290675] PCI: Using configuration type 1 for base access [ 0.290967] bio: create slab at 0 [ 0.290967] ACPI: EC: Look up EC in DSDT [ 0.291429] ACPI: Executed 1 blocks of module-level executable AML code [ 0.402092] ACPI: Interpreter enabled [ 0.402095] ACPI: (supports S0 S3 S4 S5) [ 0.402112] ACPI: Using IOAPIC for interrupt routing [ 0.402155] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.402433] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.411088] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.414475] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.414646] ACPI: No dock devices found. [ 0.414747] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.414851] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.414855] pci 0000:00:01.0: PME# disabled [ 0.414916] pci 0000:00:1a.0: reg 20 io port: [0xa880-0xa89f] [ 0.414963] pci 0000:00:1a.1: reg 20 io port: [0xac00-0xac1f] [ 0.415016] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf3fffc00-0xf3ffffff] [ 0.415065] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.415069] pci 0000:00:1a.7: PME# disabled [ 0.415106] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3ff8000-0xf3ffbfff] [ 0.415146] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.415150] pci 0000:00:1b.0: PME# disabled [ 0.415210] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.415214] pci 0000:00:1c.0: PME# disabled [ 0.415276] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.415280] pci 0000:00:1c.2: PME# disabled [ 0.415343] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.415347] pci 0000:00:1c.3: PME# disabled [ 0.415408] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.415412] pci 0000:00:1c.4: PME# disabled [ 0.415457] pci 0000:00:1d.0: reg 20 io port: [0xa400-0xa41f] [ 0.415504] pci 0000:00:1d.1: reg 20 io port: [0xa480-0xa49f] [ 0.415551] pci 0000:00:1d.2: reg 20 io port: [0xa800-0xa81f] [ 0.420016] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3fff800-0xf3fffbff] [ 0.420065] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.420069] pci 0000:00:1d.7: PME# disabled [ 0.420187] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.420191] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.420194] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 4700 (mask 001f) [ 0.420198] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) [ 0.420201] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 025c (mask 0003) [ 0.420242] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.420248] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.420254] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.420260] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.420266] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.420315] pci 0000:00:1f.2: reg 10 io port: [0xa080-0xa087] [ 0.420320] pci 0000:00:1f.2: reg 14 io port: [0xa000-0xa003] [ 0.420326] pci 0000:00:1f.2: reg 18 io port: [0x9c00-0x9c07] [ 0.420331] pci 0000:00:1f.2: reg 1c io port: [0x9880-0x9883] [ 0.420336] pci 0000:00:1f.2: reg 20 io port: [0x9800-0x981f] [ 0.420342] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf3fff000-0xf3fff7ff] [ 0.420368] pci 0000:00:1f.2: PME# supported from D3hot [ 0.420372] pci 0000:00:1f.2: PME# disabled [ 0.420394] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.420411] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.420468] pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff] [ 0.420480] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.420492] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff] [ 0.420498] pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f] [ 0.420505] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7ce0000-0xf7cfffff] [ 0.420581] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.420584] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf7cfffff] [ 0.420588] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.420627] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff] [ 0.420631] pci 0000:00:1c.0: bridge 32bit mmio: [0xf8000000-0xfbefffff] [ 0.420636] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xdc000000-0xdfffffff] [ 0.420750] pci 0000:04:00.0: reg 10 64bit mmio: [0xf7ffe000-0xf7ffffff] [ 0.420868] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.420880] pci 0000:04:00.0: PME# disabled [ 0.420952] pci 0000:00:1c.2: bridge 32bit mmio: [0xf7f00000-0xf7ffffff] [ 0.421011] pci 0000:03:00.0: reg 10 io port: [0xdc00-0xdc07] [ 0.421020] pci 0000:03:00.0: reg 14 io port: [0xd880-0xd883] [ 0.421029] pci 0000:03:00.0: reg 18 io port: [0xd800-0xd807] [ 0.421038] pci 0000:03:00.0: reg 1c io port: [0xd480-0xd483] [ 0.421046] pci 0000:03:00.0: reg 20 io port: [0xd400-0xd40f] [ 0.421055] pci 0000:03:00.0: reg 24 32bit mmio: [0xf7efe000-0xf7efffff] [ 0.421094] pci 0000:03:00.0: PME# supported from D3hot [ 0.421099] pci 0000:03:00.0: PME# disabled [ 0.421145] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.421149] pci 0000:00:1c.3: bridge 32bit mmio: [0xf7e00000-0xf7efffff] [ 0.421210] pci 0000:02:00.0: reg 10 64bit mmio: [0xf7dfc000-0xf7dfffff] [ 0.421218] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff] [ 0.421244] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.421283] pci 0000:02:00.0: supports D1 D2 [ 0.421284] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.421289] pci 0000:02:00.0: PME# disabled [ 0.421333] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.421336] pci 0000:00:1c.4: bridge 32bit mmio: [0xf7d00000-0xf7dfffff] [ 0.421374] pci 0000:07:01.0: reg 10 32bit mmio: [0xfbffe800-0xfbffefff] [ 0.421418] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold [ 0.421422] pci 0000:07:01.0: PME# disabled [ 0.421456] pci 0000:07:01.1: reg 10 32bit mmio: [0xfbfff400-0xfbfff4ff] [ 0.421501] pci 0000:07:01.1: supports D1 D2 [ 0.421502] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.421506] pci 0000:07:01.1: PME# disabled [ 0.421538] pci 0000:07:01.2: reg 10 32bit mmio: [0xfbfff800-0xfbfff8ff] [ 0.421583] pci 0000:07:01.2: supports D1 D2 [ 0.421585] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.421589] pci 0000:07:01.2: PME# disabled [ 0.421621] pci 0000:07:01.3: reg 10 32bit mmio: [0xfbfffc00-0xfbfffcff] [ 0.421665] pci 0000:07:01.3: supports D1 D2 [ 0.421667] pci 0000:07:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.421671] pci 0000:07:01.3: PME# disabled [ 0.421721] pci 0000:00:1e.0: transparent bridge [ 0.421727] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.421756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.421851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.421896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.421962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.422012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.422058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.422103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.451013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.451112] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.451213] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.451309] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.451406] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.451503] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.451599] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.451696] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.451791] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.451797] vgaarb: loaded [ 0.451882] SCSI subsystem initialized [ 0.451906] libata version 3.00 loaded. [ 0.451906] usbcore: registered new interface driver usbfs [ 0.451906] usbcore: registered new interface driver hub [ 0.451906] usbcore: registered new device driver usb [ 0.451906] ACPI: WMI: Mapper loaded [ 0.451906] PCI: Using ACPI for IRQ routing [ 0.451906] Bluetooth: Core ver 2.15 [ 0.451906] NET: Registered protocol family 31 [ 0.451906] Bluetooth: HCI device and connection manager initialized [ 0.451906] Bluetooth: HCI socket layer initialized [ 0.451906] NetLabel: Initializing [ 0.451906] NetLabel: domain hash size = 128 [ 0.451906] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.451906] NetLabel: unlabeled traffic allowed by default [ 0.451906] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.451906] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.460008] Switching to clocksource tsc [ 0.461541] pnp: PnP ACPI init [ 0.461550] ACPI: bus type pnp registered [ 0.464068] pnp: PnP ACPI: found 13 devices [ 0.464070] ACPI: ACPI bus type pnp unregistered [ 0.464079] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.464086] system 00:08: ioport range 0x25c-0x25f has been reserved [ 0.464089] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.464091] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.464094] system 00:08: ioport range 0x500-0x53f has been reserved [ 0.464096] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.464099] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.464101] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.464104] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.464106] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved [ 0.464111] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.464114] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.464118] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.464123] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.464125] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.464128] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.464131] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved [ 0.464133] system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.468768] AppArmor: AppArmor Filesystem Enabled [ 0.468828] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.468831] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.468835] pci 0000:00:01.0: MEM window: 0xf4000000-0xf7cfffff [ 0.468838] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.468843] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 [ 0.468846] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.468850] pci 0000:00:1c.0: MEM window: 0xd0000000-0xd01fffff [ 0.468854] pci 0000:00:1c.0: PREFETCH window: 0x000000d0200000-0x000000d03fffff [ 0.468860] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.468863] pci 0000:00:1c.2: IO window: 0x2000-0x2fff [ 0.468868] pci 0000:00:1c.2: MEM window: 0xf7f00000-0xf7ffffff [ 0.468872] pci 0000:00:1c.2: PREFETCH window: 0x000000d0400000-0x000000d05fffff [ 0.468878] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 [ 0.468881] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.468885] pci 0000:00:1c.3: MEM window: 0xf7e00000-0xf7efffff [ 0.468889] pci 0000:00:1c.3: PREFETCH window: 0x000000d0600000-0x000000d07fffff [ 0.468895] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 [ 0.468898] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.468903] pci 0000:00:1c.4: MEM window: 0xf7d00000-0xf7dfffff [ 0.468907] pci 0000:00:1c.4: PREFETCH window: 0xd0800000-0xd09fffff [ 0.468911] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 0.468913] pci 0000:00:1e.0: IO window: disabled [ 0.468918] pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfbffffff [ 0.468921] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.468931] alloc irq_desc for 16 on node -1 [ 0.468933] alloc kstat_irqs on node -1 [ 0.468937] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.468940] pci 0000:00:01.0: setting latency timer to 64 [ 0.468947] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.468951] pci 0000:00:1c.0: setting latency timer to 64 [ 0.468958] pci 0000:00:1c.2: enabling device (0106 -> 0107) [ 0.468960] alloc irq_desc for 18 on node -1 [ 0.468962] alloc kstat_irqs on node -1 [ 0.468964] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.468968] pci 0000:00:1c.2: setting latency timer to 64 [ 0.468975] alloc irq_desc for 19 on node -1 [ 0.468976] alloc kstat_irqs on node -1 [ 0.468979] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.468983] pci 0000:00:1c.3: setting latency timer to 64 [ 0.468990] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.468993] pci 0000:00:1c.4: setting latency timer to 64 [ 0.468999] pci 0000:00:1e.0: setting latency timer to 64 [ 0.469003] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.469005] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.469007] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.469009] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf7cfffff] [ 0.469011] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.469014] pci_bus 0000:05: resource 0 io: [0x1000-0x1fff] [ 0.469016] pci_bus 0000:05: resource 1 mem: [0xd0000000-0xd01fffff] [ 0.469018] pci_bus 0000:05: resource 2 pref mem [0xd0200000-0xd03fffff] [ 0.469020] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff] [ 0.469022] pci_bus 0000:04: resource 1 mem: [0xf7f00000-0xf7ffffff] [ 0.469024] pci_bus 0000:04: resource 2 pref mem [0xd0400000-0xd05fffff] [ 0.469026] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.469028] pci_bus 0000:03: resource 1 mem: [0xf7e00000-0xf7efffff] [ 0.469030] pci_bus 0000:03: resource 2 pref mem [0xd0600000-0xd07fffff] [ 0.469032] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.469034] pci_bus 0000:02: resource 1 mem: [0xf7d00000-0xf7dfffff] [ 0.469036] pci_bus 0000:02: resource 2 pref mem [0xd0800000-0xd09fffff] [ 0.469039] pci_bus 0000:07: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.469041] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.469043] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.469068] NET: Registered protocol family 2 [ 0.469209] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.470365] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.474539] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.475088] TCP: Hash tables configured (established 524288 bind 65536) [ 0.475090] TCP reno registered [ 0.475208] NET: Registered protocol family 1 [ 0.475372] pci 0000:01:00.0: Boot video device [ 0.475442] Trying to unpack rootfs image as initramfs... [ 0.646800] Freeing initrd memory: 8579k freed [ 0.651185] Scanning for low memory corruption every 60 seconds [ 0.651335] audit: initializing netlink socket (disabled) [ 0.651352] type=2000 audit(1257805681.649:1): initialized [ 0.659844] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.661047] VFS: Disk quotas dquot_6.5.2 [ 0.661095] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.661625] fuse init (API version 7.13) [ 0.661691] msgmni has been set to 7928 [ 0.661877] alg: No test for stdrng (krng) [ 0.661887] io scheduler noop registered [ 0.661888] io scheduler anticipatory registered [ 0.661890] io scheduler deadline registered [ 0.661921] io scheduler cfq registered (default) [ 0.662057] alloc irq_desc for 24 on node -1 [ 0.662059] alloc kstat_irqs on node -1 [ 0.662068] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.662074] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.662171] alloc irq_desc for 25 on node -1 [ 0.662172] alloc kstat_irqs on node -1 [ 0.662179] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.662186] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.662289] alloc irq_desc for 26 on node -1 [ 0.662290] alloc kstat_irqs on node -1 [ 0.662296] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.662303] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.662410] alloc irq_desc for 27 on node -1 [ 0.662412] alloc kstat_irqs on node -1 [ 0.662418] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.662425] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.662528] alloc irq_desc for 28 on node -1 [ 0.662530] alloc kstat_irqs on node -1 [ 0.662536] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X [ 0.662543] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.662620] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.662746] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.662870] ACPI: AC Adapter [AC0] (on-line) [ 0.662945] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.663797] ACPI: Lid Switch [LID] [ 0.663839] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.663844] ACPI: Sleep Button [SLPB] [ 0.663882] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.663884] ACPI: Power Button [PWRB] [ 0.663924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.663926] ACPI: Power Button [PWRF] [ 0.664450] ACPI: SSDT 00000000bffbe0b0 00320 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.664779] Marking TSC unstable due to TSC halts in idle [ 0.664821] Switching to clocksource hpet [ 0.664882] processor LNXCPU:00: registered as cooling_device0 [ 0.665130] ACPI: SSDT 00000000bffbe3d0 000E3 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.665447] processor LNXCPU:01: registered as cooling_device1 [ 0.668960] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.668969] ACPI: Thermal Zone [TZ00] (33 C) [ 0.670129] Linux agpgart interface v0.103 [ 0.670133] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.671296] brd: module loaded [ 0.671730] loop: module loaded [ 0.671810] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.671884] ahci 0000:00:1f.2: version 3.0 [ 0.671912] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.671951] alloc irq_desc for 29 on node -1 [ 0.671953] alloc kstat_irqs on node -1 [ 0.671962] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 0.672015] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 0.672018] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 0.672022] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.697442] ACPI: Battery Slot [BAT0] (battery present) [ 0.712553] scsi0 : ahci [ 0.712620] scsi1 : ahci [ 0.712665] scsi2 : ahci [ 0.712746] ata1: SATA max UDMA/133 abar m2048@0xf3fff000 port 0xf3fff100 irq 29 [ 0.712749] ata2: SATA max UDMA/133 abar m2048@0xf3fff000 port 0xf3fff180 irq 29 [ 0.712751] ata3: SATA max UDMA/133 abar m2048@0xf3fff000 port 0xf3fff200 irq 29 [ 0.712778] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.732527] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 0.732530] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.732536] ahci 0000:03:00.0: setting latency timer to 64 [ 0.732627] scsi3 : ahci [ 0.732661] ata4: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 19 [ 0.732705] ata_piix 0000:00:1f.1: version 2.13 [ 0.732711] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.732740] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.732799] scsi4 : ata_piix [ 0.732844] scsi5 : ata_piix [ 0.733991] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.733993] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.734162] ata6: port disabled. ignoring. [ 0.734679] Fixed MDIO Bus: probed [ 0.734707] PPP generic driver version 2.4.2 [ 0.734784] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.734800] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.734812] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.734815] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.734854] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.734881] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.738765] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.738775] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3fffc00 [ 0.762509] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.762569] usb usb1: configuration #1 chosen from 1 choice [ 0.762595] hub 1-0:1.0: USB hub found [ 0.762602] hub 1-0:1.0: 4 ports detected [ 0.762651] alloc irq_desc for 23 on node -1 [ 0.762653] alloc kstat_irqs on node -1 [ 0.762658] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.762666] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.762669] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.762700] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.762724] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.766599] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.766611] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3fff800 [ 0.780012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.780065] usb usb2: configuration #1 chosen from 1 choice [ 0.780086] hub 2-0:1.0: USB hub found [ 0.780092] hub 2-0:1.0: 6 ports detected [ 0.780141] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.780153] uhci_hcd: USB Universal Host Controller Interface driver [ 0.780198] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.780204] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.780206] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.780232] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.780261] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a880 [ 0.780323] usb usb3: configuration #1 chosen from 1 choice [ 0.780348] hub 3-0:1.0: USB hub found [ 0.780354] hub 3-0:1.0: 2 ports detected [ 0.780394] alloc irq_desc for 17 on node -1 [ 0.780395] alloc kstat_irqs on node -1 [ 0.780399] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.780404] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.780407] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.780429] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.780456] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ac00 [ 0.780521] usb usb4: configuration #1 chosen from 1 choice [ 0.780542] hub 4-0:1.0: USB hub found [ 0.780547] hub 4-0:1.0: 2 ports detected [ 0.780587] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.780592] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.780595] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.780622] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.780642] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a400 [ 0.780706] usb usb5: configuration #1 chosen from 1 choice [ 0.780728] hub 5-0:1.0: USB hub found [ 0.780733] hub 5-0:1.0: 2 ports detected [ 0.780770] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.780775] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.780778] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.780805] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.780826] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a480 [ 0.780886] usb usb6: configuration #1 chosen from 1 choice [ 0.780910] hub 6-0:1.0: USB hub found [ 0.780918] hub 6-0:1.0: 2 ports detected [ 0.780954] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.780959] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.780962] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.780989] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.781009] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a800 [ 0.781074] usb usb7: configuration #1 chosen from 1 choice [ 0.781096] hub 7-0:1.0: USB hub found [ 0.781102] hub 7-0:1.0: 2 ports detected [ 0.781181] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.782864] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.783966] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.783972] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.783994] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.784012] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.784029] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.784110] mice: PS/2 mouse device common for all mice [ 0.784191] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 0.784220] rtc_cmos 00:03: RTC can wake from S4 [ 0.784252] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.784274] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.784351] device-mapper: uevent: version 1.0.3 [ 0.784425] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.784482] device-mapper: multipath: version 1.1.0 loaded [ 0.784485] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.784664] cpuidle: using governor ladder [ 0.784736] cpuidle: using governor menu [ 0.785040] TCP cubic registered [ 0.785141] NET: Registered protocol family 10 [ 0.785518] lo: Disabled Privacy Extensions [ 0.785763] NET: Registered protocol family 17 [ 0.785779] Bluetooth: L2CAP ver 2.14 [ 0.785781] Bluetooth: L2CAP socket layer initialized [ 0.785783] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.785784] Bluetooth: SCO socket layer initialized [ 0.785815] Bluetooth: RFCOMM TTY layer initialized [ 0.785817] Bluetooth: RFCOMM socket layer initialized [ 0.785818] Bluetooth: RFCOMM ver 1.11 [ 0.786229] PM: Resume from disk failed. [ 0.786239] registered taskstats version 1 [ 0.786715] Magic number: 1:966:501 [ 0.786804] rtc_cmos 00:03: setting system clock to 2009-11-09 22:28:02 UTC (1257805682) [ 0.786807] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.786808] EDD information not available. [ 0.805298] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.930330] ata5.00: ATAPI: Slimtype DVDRW SSM-8515S, GS09, max UDMA/33 [ 0.990204] ata5.00: configured for UDMA/33 [ 1.060038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.060057] ata2: SATA link down (SStatus 0 SControl 300) [ 1.060075] ata3: SATA link down (SStatus 0 SControl 300) [ 1.080049] ata4: SATA link down (SStatus 0 SControl 300) [ 1.107802] ata1.00: ATA-8: WDC WD3200BEVT-00ZCT0, 11.01A11, max UDMA/133 [ 1.107807] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.108785] ata1.00: configured for UDMA/133 [ 1.120158] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 11.0 PQ: 0 ANSI: 5 [ 1.120262] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.120391] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.120428] sd 0:0:0:0: [sda] Write Protect is off [ 1.120431] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.120450] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.120564] sda: [ 1.122061] scsi 4:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GS09 PQ: 0 ANSI: 5 [ 1.128600] sda1 sda2 [ 1.131311] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.131316] Uniform CD-ROM driver Revision: 3.20 [ 1.131424] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.131458] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.157018] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.157040] Freeing unused kernel memory: 688k freed [ 1.157272] Write protecting the kernel read-only data: 7824k [ 1.268939] sky2 driver version 1.25 [ 1.268991] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.269006] sky2 0000:02:00.0: setting latency timer to 64 [ 1.269044] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2 [ 1.269131] alloc irq_desc for 30 on node -1 [ 1.269133] alloc kstat_irqs on node -1 [ 1.269149] sky2 0000:02:00.0: irq 30 for MSI/MSI-X [ 1.269708] sky2 eth0: addr 00:1d:60:7f:e0:ae [ 1.322557] usb 2-6: new high speed USB device using ehci_hcd and address 3 [ 1.330919] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6 [ 1.330956] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.336224] ohci1394 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.394554] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fbffe800-fbffefff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.488298] usb 2-6: configuration #1 chosen from 1 choice [ 1.618111] xor: automatically using best checksumming function: generic_sse [ 1.660005] generic_sse: 8897.600 MB/sec [ 1.660007] xor: using function: generic_sse (8897.600 MB/sec) [ 1.663799] device-mapper: dm-raid45: initialized v0.2594b [ 1.780020] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.793478] PM: Starting manual resume from disk [ 1.793482] PM: Resume from partition 8:1 [ 1.793483] PM: Checking hibernation image. [ 1.793647] PM: Resume from disk failed. [ 1.796537] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 1.796542] PM: Marking nosave pages: 00000000bffb0000 - 0000000100000000 [ 1.797285] PM: Basic memory bitmaps created [ 1.813372] PM: Basic memory bitmaps freed [ 1.867493] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 1.962434] usb 3-1: configuration #1 chosen from 1 choice [ 2.242535] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 2.496127] usb 7-1: configuration #1 chosen from 1 choice [ 2.712674] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003a853e6] [ 2.842293] type=1505 audit(1257805684.553:2): operation="profile_load" pid=461 name=/usr/share/gdm/guest-session/Xsession [ 2.860044] type=1505 audit(1257805684.573:3): operation="profile_load" pid=462 name=/sbin/dhclient3 [ 2.860635] type=1505 audit(1257805684.573:4): operation="profile_load" pid=462 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 2.860963] type=1505 audit(1257805684.573:5): operation="profile_load" pid=462 name=/usr/lib/connman/scripts/dhclient-script [ 2.942433] type=1505 audit(1257805684.653:6): operation="profile_load" pid=463 name=/usr/bin/evince [ 2.951645] type=1505 audit(1257805684.653:7): operation="profile_load" pid=463 name=/usr/bin/evince-previewer [ 2.959137] type=1505 audit(1257805684.665:8): operation="profile_load" pid=463 name=/usr/bin/evince-thumbnailer [ 2.983624] type=1505 audit(1257805684.693:9): operation="profile_load" pid=464 name=/usr/lib/firefox-3.5.*/firefox [ 3.024819] type=1505 audit(1257805684.733:10): operation="profile_load" pid=465 name=/usr/lib/cups/backend/cups-pdf [ 3.980053] usb 2-1: new high speed USB device using ehci_hcd and address 4 [ 4.142928] usb 2-1: configuration #1 chosen from 1 choice [ 4.671608] Adding 4883752k swap on /dev/sda1. Priority:-1 extents:1 across:4883752k [ 7.606928] udev: starting version 147 [ 8.099995] ata5: drained 256 bytes to clear DRQ. [ 8.100003] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 8.100059] ata5.00: ST_FIRST: DRQ=1 with device error, dev_stat 0x59 [ 8.100112] sr 4:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 8.100121] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 8.100122] res 59/01:03:01:01:01/00:00:00:00:00/a1 Emask 0x2 (HSM violation) [ 8.100225] ata5.00: status: { DRDY DRQ ERR } [ 8.100298] ata5: soft resetting link [ 8.302821] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 8.302825] ata5.00: revalidation failed (errno=-5) [ 9.655525] nvidia: module license 'NVIDIA' taints kernel. [ 9.655529] Disabling lock debugging due to kernel taint [ 9.948161] cfg80211: Calling CRDA to update world regulatory domain [ 10.148827] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.148837] nvidia 0000:01:00.0: setting latency timer to 64 [ 10.149556] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 10.519746] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.923923] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 10.924029] usbcore: registered new interface driver btusb [ 11.294346] Initializing USB Mass Storage driver... [ 11.294618] scsi6 : SCSI emulation for USB Mass Storage devices [ 11.294995] ricoh-mmc: Ricoh MMC Controller disabling driver [ 11.294997] ricoh-mmc: Copyright(c) Philip Langdale [ 11.295032] ricoh-mmc: Ricoh MMC controller found at 0000:07:01.2 [1180:0843] (rev 12) [ 11.295046] ricoh-mmc: Controller is now disabled. [ 11.296034] usbcore: registered new interface driver usb-storage [ 11.296037] USB Mass Storage support registered. [ 11.298120] usb-storage: device found at 4 [ 11.298123] usb-storage: waiting for device to settle before scanning [ 11.345683] sdhci: Secure Digital Host Controller Interface driver [ 11.345686] sdhci: Copyright(c) Pierre Ossman [ 11.403339] lp: driver loaded but no devices found [ 11.487857] asus_laptop: Asus Laptop Support version 0.42 [ 11.490666] asus_laptop: Error calling BSTS [ 11.490722] asus_laptop: S37S model detected [ 11.495241] input: Asus Laptop extra buttons as /devices/virtual/input/input7 [ 11.495900] Registered led device: asus::mail [ 11.654643] sdhci-pci 0000:07:01.1: SDHCI controller found [1180:0822] (rev 22) [ 11.654660] sdhci-pci 0000:07:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.655718] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 11.656824] Registered led device: mmc0:: [ 11.657894] mmc0: SDHCI controller on PCI [0000:07:01.1] using DMA [ 11.748527] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 11.748958] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 11.748960] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 11.748962] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 11.825395] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 11.825398] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 11.825501] iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.825528] iwlagn 0000:04:00.0: setting latency timer to 64 [ 11.825627] iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 11.873868] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 11.873931] alloc irq_desc for 31 on node -1 [ 11.873932] alloc kstat_irqs on node -1 [ 11.873952] iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X [ 11.894631] Linux video capture interface: v2.00 [ 12.041978] gspca: main v2.7.0 registered [ 12.081898] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 12.107228] gspca_gl860: driver startup - version 0.9d10 [ 12.107254] gspca: probing 05e3:0503 [ 12.358015] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0 [ 12.361563] gspca_gl860: 1st probe=00 [ 12.397128] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 12.424063] gspca_gl860: 1st probe=00 [ 12.457383] __ratelimit: 9 callbacks suppressed [ 12.457386] type=1505 audit(1257805694.163:14): operation="profile_replace" pid=922 name=/usr/share/gdm/guest-session/Xsession [ 12.458716] type=1505 audit(1257805694.163:15): operation="profile_replace" pid=923 name=/sbin/dhclient3 [ 12.459317] type=1505 audit(1257805694.163:16): operation="profile_replace" pid=923 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 12.459645] type=1505 audit(1257805694.163:17): operation="profile_replace" pid=923 name=/usr/lib/connman/scripts/dhclient-script [ 12.462398] type=1505 audit(1257805694.173:18): operation="profile_replace" pid=924 name=/usr/bin/evince [ 12.471945] type=1505 audit(1257805694.183:19): operation="profile_replace" pid=924 name=/usr/bin/evince-previewer [ 12.477537] type=1505 audit(1257805694.183:20): operation="profile_replace" pid=924 name=/usr/bin/evince-thumbnailer [ 12.481556] gspca_gl860: 1st probe=00 [ 12.484470] type=1505 audit(1257805694.193:21): operation="profile_replace" pid=926 name=/usr/lib/firefox-3.5.*/firefox [ 12.491262] type=1505 audit(1257805694.203:22): operation="profile_replace" pid=927 name=/usr/lib/cups/backend/cups-pdf [ 12.491956] type=1505 audit(1257805694.203:23): operation="profile_replace" pid=927 name=/usr/sbin/cupsd [ 12.515728] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.541563] gspca_gl860: 1st probe=00 [ 12.541567] gspca_gl860: No 0xff -> sensor MI2020 [ 12.541570] gspca_gl860: 05e3:0503 sensor MI2020 (2.0M) [ 12.665041] alloc irq_desc for 21 on node -1 [ 12.665043] alloc kstat_irqs on node -1 [ 12.665049] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 12.665147] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.866096] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 13.262562] ata5: soft resetting link [ 13.464612] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 13.464616] ata5.00: revalidation failed (errno=-5) [ 15.116335] cfg80211: World regulatory domain updated: [ 15.116338] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.116341] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.116343] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.116345] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.116348] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.116350] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.989610] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.989613] Bluetooth: BNEP filters: protocol multicast [ 16.113508] Bridge firewalling registered [ 18.422558] ata5: soft resetting link [ 18.622827] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 18.622830] ata5.00: revalidation failed (errno=-5) [ 18.622883] ata5.00: disabled [ 18.622895] ata5: EH complete [ 19.200127] gspca: probe ok [ 19.200137] gspca_gl860: Camera is now controlling video device /dev/video0 [ 19.200162] usbcore: registered new interface driver gspca_gl860 [ 19.200165] gspca_gl860: driver registered [ 25.101341] iwlagn 0000:04:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 25.695565] iwlagn 0000:04:00.0: loaded firmware version 228.61.2.24 [ 25.918880] Registered led device: iwl-phy0::radio [ 25.918903] Registered led device: iwl-phy0::assoc [ 25.918918] Registered led device: iwl-phy0::RX [ 25.918932] Registered led device: iwl-phy0::TX [ 25.957156] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.004795] sky2 eth0: enabling interface [ 26.005193] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.310239] usb-storage: device scan complete [ 34.632537] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 34.784205] usb 1-4: configuration #1 chosen from 1 choice [ 34.784586] scsi7 : SCSI emulation for USB Mass Storage devices [ 34.784697] usb-storage: device found at 3 [ 34.784699] usb-storage: waiting for device to settle before scanning [ 39.790250] usb-storage: device scan complete [ 39.790858] scsi 7:0:0:0: Direct-Access WDC WD64 00AAVS-00G9B0 0014 PQ: 0 ANSI: 0 [ 47.162542] usb 2-1: reset high speed USB device using ehci_hcd and address 4 [ 50.971857] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 50.972326] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 50.972471] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 50.974402] sd 6:0:0:0: [sdb] 15638528 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 50.975914] sd 6:0:0:0: [sdb] Write Protect is off [ 50.975918] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 50.975921] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 50.979464] sd 7:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 50.979697] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 50.979701] sdb: sdb1 [ 50.980951] sd 7:0:0:0: [sdc] Write Protect is off [ 50.980954] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 50.980956] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 50.982865] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 50.982869] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 50.983203] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 50.983207] sdc: sdc1 [ 51.562465] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 51.562472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 475.738032] usb 1-4: USB disconnect, address 3 [ 751.578193] usb 2-1: USB disconnect, address 4 [ 2778.450053] usb 2-1: new high speed USB device using ehci_hcd and address 5 [ 2778.613262] usb 2-1: configuration #1 chosen from 1 choice [ 2778.624551] scsi8 : SCSI emulation for USB Mass Storage devices [ 2778.626478] usb-storage: device found at 5 [ 2778.626481] usb-storage: waiting for device to settle before scanning [ 2783.623828] usb-storage: device scan complete [ 2783.625932] scsi 8:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [ 2783.627371] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 2783.635803] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 2789.045065] usb 2-1: USB disconnect, address 5 [ 2789.432552] usb 2-1: new high speed USB device using ehci_hcd and address 6 [ 2789.599052] usb 2-1: configuration #1 chosen from 1 choice [ 2789.610679] scsi9 : SCSI emulation for USB Mass Storage devices [ 2789.612296] usb-storage: device found at 6 [ 2789.612301] usb-storage: waiting for device to settle before scanning [ 2789.732855] usbcore: registered new interface driver cdc_ether [ 2789.749866] usb0: register 'rndis_host' at usb-0000:00:1d.7-1, RNDIS device, 32:69:2e:ee:85:47 [ 2789.749904] usbcore: registered new interface driver rndis_host [ 2794.607580] usb-storage: device scan complete [ 2794.609810] scsi 9:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [ 2794.611483] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 2794.625964] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 2799.792519] usb0: no IPv6 routers present [ 6403.638255] usb 2-1: USB disconnect, address 6 [ 6403.638534] usb0: unregister 'rndis_host' usb-0000:00:1d.7-1, RNDIS device [ 6428.480039] sky2 eth0: disabling interface [ 6431.538408] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 6431.538414] PM: Marking nosave pages: 00000000bffb0000 - 0000000100000000 [ 6431.539156] PM: Basic memory bitmaps created [ 6431.962559] Syncing filesystems ... done. [ 6432.222529] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 6432.229329] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 6432.229537] PM: Preallocating image memory... done (allocated 573480 pages) [ 6446.225654] PM: Allocated 2293920 kbytes in 13.99 seconds (163.96 MB/s) [ 6446.225656] Suspending console(s) (use no_console_suspend to debug) [ 6446.271880] btusb_intr_complete: hci0 urb ffff880138fd50c0 failed to resubmit (1) [ 6446.272875] btusb_bulk_complete: hci0 urb ffff880138fd5000 failed to resubmit (1) [ 6446.273881] btusb_bulk_complete: hci0 urb ffff880138fd5480 failed to resubmit (1) [ 6446.692535] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6446.694098] ACPI handle has no context! [ 6446.694104] sdhci-pci 0000:07:01.1: PCI INT B disabled [ 6446.694109] ACPI handle has no context! [ 6446.717570] ACPI handle has no context! [ 6446.732606] ACPI handle has no context! [ 6446.732614] ACPI handle has no context! [ 6446.772649] ahci 0000:03:00.0: PCI INT A disabled [ 6446.882727] ata6: port disabled. ignoring. [ 6446.882771] ata_piix 0000:00:1f.1: PCI INT A disabled [ 6446.882810] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 6446.882845] ACPI handle has no context! [ 6446.900199] ricoh-mmc: Suspending. [ 6446.900206] ricoh-mmc: Controller is now re-enabled. [ 6446.900863] ACPI: Preparing to enter system sleep state S4 [ 6446.902215] PM: Saving platform NVS memory [ 6446.904749] Disabling non-boot CPUs ... [ 6446.906998] kvm: disabling virtualization on CPU1 [ 6447.010013] CPU 1 is now offline [ 6447.010016] SMP alternatives: switching to UP code [ 6447.016156] CPU0 attaching NULL sched-domain. [ 6447.016158] CPU1 attaching NULL sched-domain. [ 6447.016167] CPU0 attaching NULL sched-domain. [ 6447.016326] CPU1 is down [ 6447.016425] PM: Creating hibernation image: [ 6447.020003] PM: Need to copy 92545 pages [ 6447.020003] PM: Normal pages needed: 92545 + 1024, available pages: 955755 [ 6447.020003] PM: Restoring platform NVS memory [ 6447.020003] CPU0: Thermal LVT vector (0xfa) already installed [ 6447.020003] Enabling non-boot CPUs ... [ 6447.020003] SMP alternatives: switching to SMP code [ 6447.022337] Booting processor 1 APIC 0x1 ip 0x6000 [ 6447.015967] Initializing CPU#1 [ 6447.015967] Calibrating delay using timer specific routine.. 4788.00 BogoMIPS (lpj=23940019) [ 6447.015967] CPU: L1 I cache: 32K, L1 D cache: 32K [ 6447.015967] CPU: L2 cache: 3072K [ 6447.015967] CPU 1/0x1 -> Node 0 [ 6447.015967] CPU: Physical Processor ID: 0 [ 6447.015967] CPU: Processor Core ID: 1 [ 6447.015967] mce: CPU supports 6 MCE banks [ 6447.015967] CPU1: Thermal monitoring enabled (TM2) [ 6447.180042] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 6447.180048] kvm: enabling virtualization on CPU1 [ 6447.180118] CPU0 attaching NULL sched-domain. [ 6447.200018] CPU0 attaching sched-domain: [ 6447.200021] domain 0: span 0-1 level MC [ 6447.200023] groups: 0 1 [ 6447.200026] CPU1 attaching sched-domain: [ 6447.200028] domain 0: span 0-1 level MC [ 6447.200029] groups: 1 0 [ 6447.200424] CPU1 is up [ 6447.201001] ACPI: Waking up from system sleep state S4 [ 6447.800306] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 6447.800635] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005) [ 6447.800661] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 6447.800718] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xf7ce0000, writing 0x0) [ 6447.800731] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0) [ 6447.800736] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007) [ 6447.800950] ahci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100103, writing 0x100107) [ 6447.820060] sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 6447.840032] ohci1394 0000:07:01.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) [ 6447.840037] ohci1394 0000:07:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 6447.840103] ricoh-mmc: Resuming. [ 6447.840110] ricoh-mmc: Controller is now disabled. [ 6447.860010] __ratelimit: 6 callbacks suppressed [ 6447.860012] pci 0000:07:01.3: Refused to change power state, currently in D3 [ 6447.998712] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 6447.998745] usb usb3: root hub lost power or was reset [ 6447.998784] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 6447.998814] usb usb4: root hub lost power or was reset [ 6447.998830] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 6447.998834] usb usb1: root hub lost power or was reset [ 6448.002700] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 6448.002717] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 6448.002721] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6448.002757] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6448.002787] usb usb5: root hub lost power or was reset [ 6448.002803] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6448.002833] usb usb6: root hub lost power or was reset [ 6448.002848] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6448.002878] usb usb7: root hub lost power or was reset [ 6448.002902] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6448.002905] usb usb2: root hub lost power or was reset [ 6448.006782] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 6448.006790] pci 0000:00:1e.0: setting latency timer to 64 [ 6448.006799] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6448.006803] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 6448.009416] ata6: port disabled. ignoring. [ 6448.009430] ahci 0000:00:1f.2: setting latency timer to 64 [ 6448.356813] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6448.356820] ahci 0000:03:00.0: setting latency timer to 64 [ 6448.360045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6448.380037] ata3: SATA link down (SStatus 0 SControl 300) [ 6448.388582] ata1.00: configured for UDMA/133 [ 6448.400036] ata2: SATA link down (SStatus 0 SControl 300) [ 6448.414551] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fbffe800-fbffefff] Max Packet=[2048] IR/IT contexts=[4/4] [ 6448.420561] sdhci-pci 0000:07:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6448.420564] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 6448.700043] ata4: SATA link down (SStatus 0 SControl 300) [ 6449.744118] sd 0:0:0:0: [sda] Starting disk [ 6449.900036] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [ 6450.063973] gspca_gl860 2-6:1.0: no reset_resume for driver gspca_gl860? [ 6450.064071] gspca: disconnect complete [ 6450.180033] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [ 6450.450033] usb 7-1: reset full speed USB device using uhci_hcd and address 2 [ 6450.674559] btusb 7-1:1.0: no reset_resume for driver btusb? [ 6450.674564] btusb 7-1:1.1: no reset_resume for driver btusb? [ 6450.920298] gspca: probing 05e3:0503 [ 6451.171595] gspca_gl860: 1st probe=00 [ 6451.231469] gspca_gl860: 1st probe=00 [ 6451.291470] gspca_gl860: 1st probe=00 [ 6451.351594] gspca_gl860: 1st probe=00 [ 6451.351597] gspca_gl860: No 0xff -> sensor MI2020 [ 6451.351599] gspca_gl860: 05e3:0503 sensor MI2020 (2.0M) [ 6457.980090] gspca: probe ok [ 6457.980093] gspca_gl860: Camera is now controlling video device /dev/video0 [ 6457.995673] Restarting tasks ... done. [ 6458.026187] PM: Basic memory bitmaps freed [ 6515.335899] Registered led device: iwl-phy0::radio [ 6515.336156] Registered led device: iwl-phy0::assoc [ 6515.336203] Registered led device: iwl-phy0::RX [ 6515.336345] Registered led device: iwl-phy0::TX [ 6515.620809] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6517.145656] sky2 eth0: enabling interface [ 6517.146374] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6518.950036] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 6519.101724] usb 1-4: configuration #1 chosen from 1 choice [ 6519.102476] scsi10 : SCSI emulation for USB Mass Storage devices [ 6519.102615] usb-storage: device found at 4 [ 6519.102619] usb-storage: waiting for device to settle before scanning [ 6524.100271] usb-storage: device scan complete [ 6524.100873] scsi 10:0:0:0: Direct-Access WDC WD64 00AAVS-00G9B0 0014 PQ: 0 ANSI: 0 [ 6524.105242] sd 10:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 6524.105478] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 6524.106356] sd 10:0:0:0: [sdb] Write Protect is off [ 6524.106362] sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 6524.106366] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 6524.108726] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 6524.108733] sdb: sdb1 [ 6524.122225] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 6524.122233] sd 10:0:0:0: [sdb] Attached SCSI disk [ 9816.503916] usb 1-4: USB disconnect, address 4 [ 9871.800042] usb 1-4: new high speed USB device using ehci_hcd and address 5 [ 9871.970490] usb 1-4: configuration #1 chosen from 1 choice [ 9871.970810] scsi11 : SCSI emulation for USB Mass Storage devices [ 9871.971072] usb-storage: device found at 5 [ 9871.971075] usb-storage: waiting for device to settle before scanning [ 9872.100035] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 9872.267188] usb 5-1: configuration #1 chosen from 1 choice [ 9872.273099] scsi12 : SCSI emulation for USB Mass Storage devices [ 9872.276518] usb-storage: device found at 2 [ 9872.276522] usb-storage: waiting for device to settle before scanning [ 9872.300061] usb 5-1: USB disconnect, address 2 [ 9873.080039] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 9873.248196] usb 5-1: configuration #1 chosen from 1 choice [ 9873.261170] scsi15 : SCSI emulation for USB Mass Storage devices [ 9873.261814] usb-storage: device found at 3 [ 9873.261816] usb-storage: waiting for device to settle before scanning [ 9876.970278] usb-storage: device scan complete [ 9876.971636] scsi 11:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 9876.974025] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 9878.254107] usb-storage: device scan complete [ 9878.257094] scsi 15:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 9878.281068] sr1: scsi-1 drive [ 9878.281791] sr 15:0:0:0: Attached scsi CD-ROM sr1 [ 9878.281988] sr 15:0:0:0: Attached scsi generic sg3 type 5 [ 9880.000883] sd 11:0:0:0: [sdb] 15638528 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 9880.001368] sd 11:0:0:0: [sdb] Write Protect is off [ 9880.001373] sd 11:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 9880.001377] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 9880.004114] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 9880.004121] sdb: sdb1 [ 9880.006363] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 9880.006371] sd 11:0:0:0: [sdb] Attached SCSI removable disk [ 9887.466078] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 9887.466098] sr: Sense Key : Hardware Error [current] [ 9887.466104] sr: Add. Sense: No additional sense information [ 9889.486068] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 9889.486086] sr: Sense Key : Hardware Error [current] [ 9889.486092] sr: Add. Sense: No additional sense information [ 9889.694068] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 9889.694086] sr: Sense Key : Hardware Error [current] [ 9889.694092] sr: Add. Sense: No additional sense information [ 9889.980041] usb 5-1: reset full speed USB device using uhci_hcd and address 3 [ 9890.640036] usb 5-1: reset full speed USB device using uhci_hcd and address 3 [ 9890.770047] usb 5-1: device descriptor read/64, error -71 [ 9890.950087] usb 5-1: USB disconnect, address 3 [ 9904.710039] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 9904.888190] usb 5-1: configuration #1 chosen from 1 choice [ 9904.900089] scsi18 : SCSI emulation for USB Mass Storage devices [ 9904.901860] usb-storage: device found at 4 [ 9904.901865] usb-storage: waiting for device to settle before scanning [ 9909.902105] usb-storage: device scan complete [ 9931.160043] usb 5-1: reset full speed USB device using uhci_hcd and address 4 [ 9931.325100] scsi 18:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 9931.348073] sr1: scsi-1 drive [ 9931.348280] sr 18:0:0:0: Attached scsi CD-ROM sr1 [ 9931.348385] sr 18:0:0:0: Attached scsi generic sg3 type 5 [ 9941.467084] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 9941.467103] sr: Sense Key : Hardware Error [current] [ 9941.467109] sr: Add. Sense: No additional sense information [ 9943.488072] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 9943.488091] sr: Sense Key : Hardware Error [current] [ 9943.488097] sr: Add. Sense: No additional sense information [ 9943.693071] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 9943.693088] sr: Sense Key : Hardware Error [current] [ 9943.693095] sr: Add. Sense: No additional sense information [ 9943.900037] usb 5-1: reset full speed USB device using uhci_hcd and address 4 [ 9944.570039] usb 5-1: reset full speed USB device using uhci_hcd and address 4 [ 9944.640085] usb 5-1: USB disconnect, address 4 [ 9966.700042] usb 1-3: new high speed USB device using ehci_hcd and address 6 [ 9966.852294] usb 1-3: configuration #1 chosen from 1 choice [ 9966.852679] scsi19 : SCSI emulation for USB Mass Storage devices [ 9966.852929] usb-storage: device found at 6 [ 9966.852932] usb-storage: waiting for device to settle before scanning [ 9971.850289] usb-storage: device scan complete [ 9971.850899] scsi 19:0:0:0: Direct-Access WDC WD64 00AAVS-00G9B0 0014 PQ: 0 ANSI: 0 [ 9971.858016] sd 19:0:0:0: Attached scsi generic sg3 type 0 [ 9971.861757] sd 19:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 9971.862750] sd 19:0:0:0: [sdc] Write Protect is off [ 9971.862755] sd 19:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 9971.862759] sd 19:0:0:0: [sdc] Assuming drive cache: write through [ 9971.864749] sd 19:0:0:0: [sdc] Assuming drive cache: write through [ 9971.864755] sdc: sdc1 [ 9971.885126] sd 19:0:0:0: [sdc] Assuming drive cache: write through [ 9971.885134] sd 19:0:0:0: [sdc] Attached SCSI disk [ 9972.890037] usb 5-1: new full speed USB device using uhci_hcd and address 5 [ 9973.057207] usb 5-1: configuration #1 chosen from 1 choice [ 9973.075072] scsi22 : SCSI emulation for USB Mass Storage devices [ 9973.077016] usb-storage: device found at 5 [ 9973.077019] usb-storage: waiting for device to settle before scanning [ 9973.176974] usbcore: registered new interface driver usbserial [ 9973.177287] USB Serial support registered for generic [ 9973.177662] usbcore: registered new interface driver usbserial_generic [ 9973.177667] usbserial: USB Serial Driver core [ 9973.194718] USB Serial support registered for GSM modem (1-port) [ 9973.195106] option 5-1:1.0: GSM modem (1-port) converter detected [ 9973.196237] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 9973.196267] option 5-1:1.1: GSM modem (1-port) converter detected [ 9973.196437] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 9973.196471] usbcore: registered new interface driver option [ 9973.196474] option: v0.7.2:USB Driver for GSM modems [ 9978.072105] usb-storage: device scan complete [ 9999.043057] option: option_instat_callback: error -108 [ 9999.043226] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 9999.043259] option 5-1:1.0: device disconnected [ 9999.043365] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 9999.043393] option 5-1:1.1: device disconnected [ 9999.160048] usb 5-1: reset full speed USB device using uhci_hcd and address 5 [ 9999.312165] option 5-1:1.1: GSM modem (1-port) converter detected [ 9999.312268] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 9999.314742] option 5-1:1.0: GSM modem (1-port) converter detected [ 9999.314835] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 9999.330319] scsi 22:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 9999.354076] sr1: scsi-1 drive [ 9999.354277] sr 22:0:0:0: Attached scsi CD-ROM sr1 [ 9999.354388] sr 22:0:0:0: Attached scsi generic sg4 type 5 [10009.465073] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [10009.465091] sr: Sense Key : Hardware Error [current] [10009.465097] sr: Add. Sense: No additional sense information [10011.484077] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [10011.484095] sr: Sense Key : Hardware Error [current] [10011.484101] sr: Add. Sense: No additional sense information [10011.692076] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [10011.692095] sr: Sense Key : Hardware Error [current] [10011.692101] sr: Add. Sense: No additional sense information [10011.793058] option: option_instat_callback: error -108 [10011.793228] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10011.793260] option 5-1:1.0: device disconnected [10011.793367] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10011.793395] option 5-1:1.1: device disconnected [10011.980042] usb 5-1: reset full speed USB device using uhci_hcd and address 5 [10012.138010] option 5-1:1.1: GSM modem (1-port) converter detected [10012.138130] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10012.138244] option 5-1:1.0: GSM modem (1-port) converter detected [10012.138301] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10012.535041] option: option_instat_callback: error -108 [10012.536209] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10012.536225] option 5-1:1.0: device disconnected [10012.536286] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10012.536302] option 5-1:1.1: device disconnected [10012.650140] usb 5-1: reset full speed USB device using uhci_hcd and address 5 [10012.720277] usb 5-1: USB disconnect, address 5 [10026.730047] usb 5-1: new full speed USB device using uhci_hcd and address 6 [10026.898169] usb 5-1: configuration #1 chosen from 1 choice [10026.904315] option 5-1:1.0: GSM modem (1-port) converter detected [10026.904434] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10026.915636] option 5-1:1.1: GSM modem (1-port) converter detected [10026.915758] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10026.917095] scsi29 : SCSI emulation for USB Mass Storage devices [10026.917343] usb-storage: device found at 6 [10026.917346] usb-storage: waiting for device to settle before scanning [10031.911116] usb-storage: device scan complete [10053.042057] option: option_instat_callback: error -108 [10053.042284] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10053.042316] option 5-1:1.0: device disconnected [10053.042428] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10053.042456] option 5-1:1.1: device disconnected [10053.160039] usb 5-1: reset full speed USB device using uhci_hcd and address 6 [10053.336848] option 5-1:1.1: GSM modem (1-port) converter detected [10053.336944] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10053.337103] option 5-1:1.0: GSM modem (1-port) converter detected [10053.337155] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10053.351142] scsi 29:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [10053.375078] sr1: scsi-1 drive [10053.375236] sr 29:0:0:0: Attached scsi CD-ROM sr1 [10053.375325] sr 29:0:0:0: Attached scsi generic sg4 type 5 [10063.467088] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [10063.467107] sr: Sense Key : Hardware Error [current] [10063.467114] sr: Add. Sense: No additional sense information [10065.485083] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [10065.485102] sr: Sense Key : Hardware Error [current] [10065.485108] sr: Add. Sense: No additional sense information [10065.693083] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [10065.693103] sr: Sense Key : Hardware Error [current] [10065.693109] sr: Add. Sense: No additional sense information [10065.791068] option: option_instat_callback: error -108 [10065.791241] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10065.791281] option 5-1:1.0: device disconnected [10065.791385] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10065.791414] option 5-1:1.1: device disconnected [10065.910085] usb 5-1: reset full speed USB device using uhci_hcd and address 6 [10066.062265] option 5-1:1.1: GSM modem (1-port) converter detected [10066.062367] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10066.069793] option 5-1:1.0: GSM modem (1-port) converter detected [10066.069918] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10075.210068] option: option_instat_callback: error -108 [10075.212151] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10075.212173] option 5-1:1.0: device disconnected [10075.212271] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10075.212298] option 5-1:1.1: device disconnected [10075.270091] usb 5-1: USB disconnect, address 6 [10116.250067] usb 5-1: new full speed USB device using uhci_hcd and address 7 [10116.416383] usb 5-1: configuration #1 chosen from 1 choice [10116.430643] scsi34 : SCSI emulation for USB Mass Storage devices [10116.431648] usb 5-1: USB disconnect, address 7 [10116.431760] usb-storage: device found at 7 [10116.431762] usb-storage: waiting for device to settle before scanning [10117.322534] usb 5-1: new full speed USB device using uhci_hcd and address 8 [10117.490386] usb 5-1: configuration #1 chosen from 1 choice [10117.496720] option 5-1:1.0: GSM modem (1-port) converter detected [10117.496857] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10117.501939] option 5-1:1.1: GSM modem (1-port) converter detected [10117.502079] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10117.515932] scsi37 : SCSI emulation for USB Mass Storage devices [10117.519186] usb-storage: device found at 8 [10117.519189] usb-storage: waiting for device to settle before scanning [10122.511303] usb-storage: device scan complete [10122.514274] scsi 37:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [10122.539287] sr1: scsi-1 drive [10122.539507] sr 37:0:0:0: Attached scsi CD-ROM sr1 [10122.539637] sr 37:0:0:0: Attached scsi generic sg4 type 5 [10131.469254] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [10131.469272] sr: Sense Key : Hardware Error [current] [10131.469278] sr: Add. Sense: No additional sense information [10133.484274] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [10133.484291] sr: Sense Key : Hardware Error [current] [10133.484297] sr: Add. Sense: No additional sense information [10133.688260] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [10133.688277] sr: Sense Key : Hardware Error [current] [10133.688284] sr: Add. Sense: No additional sense information [10133.792231] option: option_instat_callback: error -108 [10133.792406] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10133.792439] option 5-1:1.0: device disconnected [10133.792583] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10133.792613] option 5-1:1.1: device disconnected [10133.912550] usb 5-1: reset full speed USB device using uhci_hcd and address 8 [10134.070447] option 5-1:1.1: GSM modem (1-port) converter detected [10134.070553] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10134.074482] option 5-1:1.0: GSM modem (1-port) converter detected [10134.074588] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10134.472225] option: option_instat_callback: error -108 [10134.473472] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10134.473486] option 5-1:1.0: device disconnected [10134.473549] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10134.473566] option 5-1:1.1: device disconnected [10134.590048] usb 5-1: reset full speed USB device using uhci_hcd and address 8 [10134.662810] usb 5-1: USB disconnect, address 8 [10148.682560] usb 5-1: new full speed USB device using uhci_hcd and address 9 [10148.847216] usb 5-1: configuration #1 chosen from 1 choice [10148.853973] option 5-1:1.0: GSM modem (1-port) converter detected [10148.854122] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10148.857976] option 5-1:1.1: GSM modem (1-port) converter detected [10148.858106] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10148.866431] scsi42 : SCSI emulation for USB Mass Storage devices [10148.871927] usb-storage: device found at 9 [10148.871929] usb-storage: waiting for device to settle before scanning [10153.864152] usb-storage: device scan complete [10163.255164] PPP BSD Compression module registered [10163.296262] PPP Deflate Compression module registered [10175.053059] option: option_instat_callback: error -108 [10175.054240] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10175.054254] option 5-1:1.0: device disconnected [10175.054324] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10175.054342] option 5-1:1.1: device disconnected [10175.172561] usb 5-1: reset full speed USB device using uhci_hcd and address 9 [10175.322294] option 5-1:1.1: GSM modem (1-port) converter detected [10175.322405] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10175.323795] option 5-1:1.0: GSM modem (1-port) converter detected [10175.323888] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10175.339148] scsi 42:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [10175.364090] sr1: scsi-1 drive [10175.364244] sr 42:0:0:0: Attached scsi CD-ROM sr1 [10175.364336] sr 42:0:0:0: Attached scsi generic sg4 type 5 [10185.475690] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [10185.475701] sr: Sense Key : Hardware Error [current] [10185.475704] sr: Add. Sense: No additional sense information [10187.504079] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [10187.504089] sr: Sense Key : Hardware Error [current] [10187.504093] sr: Add. Sense: No additional sense information [10187.734121] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [10187.734131] sr: Sense Key : Hardware Error [current] [10187.734134] sr: Add. Sense: No additional sense information [10187.898043] option: option_instat_callback: error -108 [10187.898299] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10187.898325] option 5-1:1.0: device disconnected [10187.899694] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10187.899710] option 5-1:1.1: device disconnected [10188.020128] usb 5-1: reset full speed USB device using uhci_hcd and address 9 [10188.198762] option 5-1:1.1: GSM modem (1-port) converter detected [10188.198868] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10188.202894] option 5-1:1.0: GSM modem (1-port) converter detected [10188.202997] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10188.603056] option: option_instat_callback: error -108 [10188.603192] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10188.603213] option 5-1:1.0: device disconnected [10188.605796] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10188.605811] option 5-1:1.1: device disconnected [10188.662754] usb 5-1: USB disconnect, address 9 [10202.812549] usb 5-1: new full speed USB device using uhci_hcd and address 10 [10202.977762] usb 5-1: configuration #1 chosen from 1 choice [10202.983865] option 5-1:1.0: GSM modem (1-port) converter detected [10202.984004] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10202.987396] option 5-1:1.1: GSM modem (1-port) converter detected [10202.987527] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10203.001536] scsi49 : SCSI emulation for USB Mass Storage devices [10203.002434] usb-storage: device found at 10 [10203.002437] usb-storage: waiting for device to settle before scanning [10206.792588] usb 5-1: USB disconnect, address 10 [10206.794614] option: option_instat_callback: error -108 [10206.794909] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10206.794940] option 5-1:1.0: device disconnected [10206.795131] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10206.795165] option 5-1:1.1: device disconnected [10213.860054] usb 2-1: new high speed USB device using ehci_hcd and address 16 [10214.023345] usb 2-1: configuration #1 chosen from 1 choice [10214.029175] scsi50 : SCSI emulation for USB Mass Storage devices [10214.032036] usb-storage: device found at 16 [10214.032040] usb-storage: waiting for device to settle before scanning [10219.031244] usb-storage: device scan complete [10219.033227] scsi 50:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [10219.035501] sd 50:0:0:0: Attached scsi generic sg4 type 0 [10219.042985] sd 50:0:0:0: [sdd] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB) [10219.044717] sd 50:0:0:0: [sdd] Write Protect is off [10219.044723] sd 50:0:0:0: [sdd] Mode Sense: 03 00 00 00 [10219.044727] sd 50:0:0:0: [sdd] Assuming drive cache: write through [10219.051711] sd 50:0:0:0: [sdd] Assuming drive cache: write through [10219.051719] sdd: sdd1 sdd2 [10219.303331] sd 50:0:0:0: [sdd] Assuming drive cache: write through [10219.303339] sd 50:0:0:0: [sdd] Attached SCSI removable disk [10290.759738] usb 2-1: USB disconnect, address 16 [10310.970058] usb 5-1: new full speed USB device using uhci_hcd and address 11 [10311.136212] usb 5-1: configuration #1 chosen from 1 choice [10311.141197] scsi51 : SCSI emulation for USB Mass Storage devices [10311.141406] usb-storage: device found at 11 [10311.141410] usb-storage: waiting for device to settle before scanning [10311.520098] usb 5-1: USB disconnect, address 11 [10311.812715] usb 5-1: new full speed USB device using uhci_hcd and address 12 [10311.978216] usb 5-1: configuration #1 chosen from 1 choice [10311.985208] option 5-1:1.0: GSM modem (1-port) converter detected [10311.985338] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10311.988323] option 5-1:1.1: GSM modem (1-port) converter detected [10311.988444] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10311.992104] scsi54 : SCSI emulation for USB Mass Storage devices [10311.992459] usb-storage: device found at 12 [10311.992463] usb-storage: waiting for device to settle before scanning [10316.992112] usb-storage: device scan complete [10316.995093] scsi 54:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [10317.019076] sr1: scsi-1 drive [10317.019720] sr 54:0:0:0: Attached scsi CD-ROM sr1 [10317.019927] sr 54:0:0:0: Attached scsi generic sg4 type 5 [10327.467079] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [10327.467099] sr: Sense Key : Hardware Error [current] [10327.467105] sr: Add. Sense: No additional sense information [10329.531073] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [10329.531092] sr: Sense Key : Hardware Error [current] [10329.531099] sr: Add. Sense: No additional sense information [10329.815100] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [10329.815120] sr: Sense Key : Hardware Error [current] [10329.815126] sr: Add. Sense: No additional sense information [10329.920048] option: option_instat_callback: error -108 [10329.920241] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10329.920271] option 5-1:1.0: device disconnected [10329.920381] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10329.920408] option 5-1:1.1: device disconnected [10330.040070] usb 5-1: reset full speed USB device using uhci_hcd and address 12 [10330.191204] option 5-1:1.1: GSM modem (1-port) converter detected [10330.191334] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10330.191568] option 5-1:1.0: GSM modem (1-port) converter detected [10330.191662] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10330.590057] option: option_instat_callback: error -108 [10330.591256] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10330.591278] option 5-1:1.0: device disconnected [10330.591379] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10330.591408] option 5-1:1.1: device disconnected [10330.710056] usb 5-1: reset full speed USB device using uhci_hcd and address 12 [10330.780091] usb 5-1: USB disconnect, address 12 [10344.790044] usb 5-1: new full speed USB device using uhci_hcd and address 13 [10344.958202] usb 5-1: configuration #1 chosen from 1 choice [10344.965105] option 5-1:1.0: GSM modem (1-port) converter detected [10344.965233] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10344.972219] option 5-1:1.1: GSM modem (1-port) converter detected [10344.972311] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10344.977195] scsi59 : SCSI emulation for USB Mass Storage devices [10344.977408] usb-storage: device found at 13 [10344.977410] usb-storage: waiting for device to settle before scanning [10349.972111] usb-storage: device scan complete [10350.765055] option: option_instat_callback: error -108 [10350.765228] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10350.765259] option 5-1:1.0: device disconnected [10350.765369] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10350.765394] option 5-1:1.1: device disconnected [10350.820094] usb 5-1: USB disconnect, address 13 [10367.020062] usb 5-1: new full speed USB device using uhci_hcd and address 14 [10367.187702] usb 5-1: configuration #1 chosen from 1 choice [10367.198005] option 5-1:1.0: GSM modem (1-port) converter detected [10367.198163] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10367.201761] option 5-1:1.1: GSM modem (1-port) converter detected [10367.201853] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10367.223201] scsi62 : SCSI emulation for USB Mass Storage devices [10367.225221] usb-storage: device found at 14 [10367.225223] usb-storage: waiting for device to settle before scanning [10372.221636] usb-storage: device scan complete [10393.015548] option: option_instat_callback: error -108 [10393.015671] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [10393.015694] option 5-1:1.0: device disconnected [10393.015764] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [10393.015784] option 5-1:1.1: device disconnected [10393.130043] usb 5-1: reset full speed USB device using uhci_hcd and address 14 [10393.281736] option 5-1:1.1: GSM modem (1-port) converter detected [10393.281881] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [10393.282709] option 5-1:1.0: GSM modem (1-port) converter detected [10393.282811] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 [10393.296612] scsi 62:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [10393.319586] sr1: scsi-1 drive [10393.319792] sr 62:0:0:0: Attached scsi CD-ROM sr1 [10393.319898] sr 62:0:0:0: Attached scsi generic sg4 type 5