<6>[ 0.000000] Initializing cgroup subsys cpuset <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 2.6.31-14-generic (root@ronne) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48+bug396286v4 SMP Thu Oct 29 15:58:25 UTC 2009 (Ubuntu 2.6.31-14.48+bug396286v4-generic) <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] NSC Geode by NSC <6>[ 0.000000] Cyrix CyrixInstead <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] Transmeta GenuineTMx86 <6>[ 0.000000] Transmeta TransmetaCPU <6>[ 0.000000] UMC UMC UMC UMC <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) <6>[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <6>[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fb0000 (usable) <6>[ 0.000000] BIOS-e820: 0000000037fb0000 - 0000000037fb3000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 0000000037fb3000 - 0000000037fc0000 (ACPI data) <6>[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <6>[ 0.000000] DMI 2.2 present. <5>[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. <7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) <6>[ 0.000000] last_pfn = 0x37fb0 max_arch_pfn = 0x100000 <6>[ 0.000000] Scanning 0 areas for low memory corruption <6>[ 0.000000] modified physical RAM map: <6>[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) <6>[ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable) <6>[ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) <6>[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) <6>[ 0.000000] modified: 0000000000100000 - 0000000037fb0000 (usable) <6>[ 0.000000] modified: 0000000037fb0000 - 0000000037fb3000 (ACPI NVS) <6>[ 0.000000] modified: 0000000037fb3000 - 0000000037fc0000 (ACPI data) <6>[ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) <7>[ 0.000000] initial memory mapped : 0 - 00c00000 <6>[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 <6>[ 0.000000] Using x86 segment limits to approximate NX protection <7>[ 0.000000] 0000000000 - 0000400000 page 4k <7>[ 0.000000] 0000400000 - 0037400000 page 2M <7>[ 0.000000] 0037400000 - 00377fe000 page 4k <7>[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 <6>[ 0.000000] RAMDISK: 377fb000 - 37f9f5db <6>[ 0.000000] Allocated new RAMDISK: 008ad000 - 010515db <6>[ 0.000000] Move RAMDISK from 00000000377fb000 - 0000000037f9f5da to 008ad000 - 010515da <4>[ 0.000000] ACPI: RSDP 000f5910 00014 (v00 AMDGX3) <4>[ 0.000000] ACPI: RSDT 37fb3000 00028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000) <4>[ 0.000000] ACPI: FACP 37fb3080 00074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000) <4>[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8 20090521 tbfadt-608 <4>[ 0.000000] ACPI: DSDT 37fb3100 01581 (v01 AMDGX3 AWRDACPI 00001017 MSFT 03000000) <4>[ 0.000000] ACPI: FACS 37fb0000 00040 <5>[ 0.000000] 7MB HIGHMEM available. <5>[ 0.000000] 887MB LOWMEM available. <6>[ 0.000000] mapped low ram: 0 - 377fe000 <6>[ 0.000000] low ram: 0 - 377fe000 <6>[ 0.000000] node 0 low ram: 00000000 - 377fe000 <6>[ 0.000000] node 0 bootmap 00011000 - 00017f00 <6>[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] <6>[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6>[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] <6>[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] <6>[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] <6>[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] <6>[ 0.000000] #5 [00008a9000 - 00008ac0ee] BRK ==> [00008a9000 - 00008ac0ee] <6>[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] <6>[ 0.000000] #7 [00008ad000 - 00010515db] NEW RAMDISK ==> [00008ad000 - 00010515db] <6>[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] <6>[ 0.000000] Reserving 64MB of memory at 32MB for crashkernel (System RAM: 895MB) <4>[ 0.000000] Zone PFN ranges: <4>[ 0.000000] DMA 0x00000010 -> 0x00001000 <4>[ 0.000000] Normal 0x00001000 -> 0x000377fe <4>[ 0.000000] HighMem 0x000377fe -> 0x00037fb0 <4>[ 0.000000] Movable zone start PFN for each node <4>[ 0.000000] early_node_map[2] active PFN ranges <4>[ 0.000000] 0: 0x00000010 -> 0x0000009e <4>[ 0.000000] 0: 0x00000100 -> 0x00037fb0 <7>[ 0.000000] On node 0 totalpages: 229182 <7>[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1052200 <7>[ 0.000000] DMA zone: 32 pages used for memmap <7>[ 0.000000] DMA zone: 0 pages reserved <7>[ 0.000000] DMA zone: 3950 pages, LIFO batch:0 <7>[ 0.000000] Normal zone: 1744 pages used for memmap <7>[ 0.000000] Normal zone: 221486 pages, LIFO batch:31 <7>[ 0.000000] HighMem zone: 16 pages used for memmap <7>[ 0.000000] HighMem zone: 1954 pages, LIFO batch:0 <6>[ 0.000000] Using APIC driver default <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x9c10 <6>[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs <6>[ 0.000000] No local APIC present or hardware disabled <6>[ 0.000000] APIC: disable apic facility <7>[ 0.000000] nr_irqs_gsi: 16 <6>[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 <6>[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 <6>[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 <6>[ 0.000000] Allocating PCI resources starting at 37fc0000 (gap: 37fc0000:c8030000) <6>[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 <6>[ 0.000000] PERCPU: Embedded 14 pages at c1756000, static data 35612 bytes <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227390 <5>[ 0.000000] Kernel command line: root=UUID=97b2628b-28a5-49f2-85f7-495728b3bef8 ro vga=795 quiet splash crashkernel=384M-2G:64M,2G-:128M <4>[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Initializing CPU#0 <6>[ 0.000000] allocated 4585600 bytes of page_cgroup <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups <6>[ 0.000000] Initializing HighMem for node 0 (000377fe:00037fb0) <6>[ 0.000000] Memory: 822760k/917184k available (4566k kernel code, 93756k reserved, 2142k data, 540k init, 7880k highmem) <6>[ 0.000000] virtual kernel memory layout: <6>[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) <6>[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) <6>[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) <6>[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) <6>[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) <6>[ 0.000000] .data : 0xc0575804 - 0xc078d308 (2142 kB) <6>[ 0.000000] .text : 0xc0100000 - 0xc0575804 (4566 kB) <6>[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] NR_IRQS:2304 nr_irqs:256 <4>[ 0.000000] Fast TSC calibration using PIT <4>[ 0.000000] Detected 498.015 MHz processor. <4>[ 0.000083] Console: colour dummy device 80x25 <6>[ 0.000103] console [tty0] enabled <6>[ 0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.03 BogoMIPS (lpj=1992060) <6>[ 0.004114] Security Framework initialized <6>[ 0.004232] AppArmor: AppArmor initialized <4>[ 0.004271] Mount-cache hash table entries: 512 <6>[ 0.004744] Initializing cgroup subsys ns <6>[ 0.004764] Initializing cgroup subsys cpuacct <6>[ 0.004791] Initializing cgroup subsys memory <6>[ 0.004829] Initializing cgroup subsys freezer <6>[ 0.004845] Initializing cgroup subsys net_cls <6>[ 0.004895] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) <6>[ 0.004916] CPU: L2 Cache: 128K (32 bytes/line) <6>[ 0.004961] Performance Counters: no PMU driver, software counters only. <6>[ 0.004987] Checking 'hlt' instruction... OK. <6>[ 0.020249] SMP alternatives: switching to UP code <6>[ 0.036052] Freeing SMP alternatives: 19k freed <6>[ 0.036094] ACPI: Core revision 20090521 <4>[ 0.043487] ACPI: setting ELCR to 0200 (from 0c20) <4>[ 0.044315] weird, boot CPU (#0) not listed by the BIOS. <5>[ 0.044331] SMP motherboard not detected. <5>[ 0.044346] Local APIC not detected. Using dummy APIC emulation. <6>[ 0.044361] SMP disabled <6>[ 0.044776] Brought up 1 CPUs <6>[ 0.044794] Total of 1 processors activated (996.03 BogoMIPS). <7>[ 0.044839] CPU0 attaching NULL sched-domain. <6>[ 0.045795] Booting paravirtualized kernel on bare hardware <6>[ 0.047155] regulator: core version 0.5 <4>[ 0.047221] Time: 19:27:17 Date: 10/29/09 <6>[ 0.047483] NET: Registered protocol family 16 <6>[ 0.047545] swapper:1 freeing invalid memtype fffff000-0 <6>[ 0.048408] EISA bus registered <6>[ 0.048450] ACPI: bus type pci registered <6>[ 0.050199] PCI: PCI BIOS revision 2.10 entry at 0xfad30, last bus=0 <6>[ 0.050217] PCI: Using configuration type 1 for base access <4>[ 0.056591] bio: create slab at 0 <7>[ 0.060708] ACPI: EC: Look up EC in DSDT <6>[ 0.072042] ACPI: Interpreter enabled <6>[ 0.072076] ACPI: (supports S0 S1 S5) <6>[ 0.072183] ACPI: Using PIC for interrupt routing <6>[ 0.082174] ACPI: No dock devices found. <6>[ 0.082505] ACPI: PCI Root Bridge [PCI0] (0000:00) <7>[ 0.082895] pci 0000:00:01.0: reg 10 io port: [0xac1c-0xac1f] <7>[ 0.083012] pci 0000:00:01.0: reg 14 io port: [0x9e00-0x9e07] <7>[ 0.083983] pci 0000:00:01.1: reg 10 32bit mmio: [0xd0000000-0xdfffffff] <7>[ 0.084129] pci 0000:00:01.1: reg 14 32bit mmio: [0xefff0000-0xefff3fff] <7>[ 0.084260] pci 0000:00:01.1: reg 18 32bit mmio: [0xeffec000-0xeffeffff] <7>[ 0.084389] pci 0000:00:01.1: reg 1c 32bit mmio: [0xeffe8000-0xeffebfff] <7>[ 0.084520] pci 0000:00:01.1: reg 20 32bit mmio: [0xefff8000-0xefffbfff] <7>[ 0.085208] pci 0000:00:01.2: reg 10 32bit mmio: [0xefff4000-0xefff7fff] <7>[ 0.086114] pci 0000:00:0d.0: reg 10 io port: [0xfc00-0xfcff] <7>[ 0.086142] pci 0000:00:0d.0: reg 14 32bit mmio: [0xeffff000-0xeffff0ff] <7>[ 0.086215] pci 0000:00:0d.0: supports D1 D2 <6>[ 0.086234] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold <6>[ 0.086256] pci 0000:00:0d.0: PME# disabled <7>[ 0.086565] pci 0000:00:0f.0: reg 10 io port: [0x6000-0x6007] <7>[ 0.086684] pci 0000:00:0f.0: reg 14 io port: [0x6100-0x61ff] <7>[ 0.086803] pci 0000:00:0f.0: reg 18 io port: [0x6200-0x623f] <7>[ 0.086924] pci 0000:00:0f.0: reg 1c io port: [0x00-0x1f] <7>[ 0.087045] pci 0000:00:0f.0: reg 20 io port: [0x9d00-0x9d7f] <7>[ 0.087170] pci 0000:00:0f.0: reg 24 io port: [0x9c00-0x9c3f] <7>[ 0.088145] pci 0000:00:0f.2: reg 20 io port: [0xff00-0xff0f] <7>[ 0.088831] pci 0000:00:0f.3: reg 10 io port: [0xfe00-0xfe7f] <7>[ 0.090078] pci 0000:00:0f.4: reg 10 32bit mmio: [0xefffe000-0xefffefff] <6>[ 0.090987] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold <6>[ 0.091057] pci 0000:00:0f.4: PME# disabled <7>[ 0.091680] pci 0000:00:0f.5: reg 10 32bit mmio: [0xefffd000-0xefffdfff] <6>[ 0.092625] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold <6>[ 0.092694] pci 0000:00:0f.5: PME# disabled <7>[ 0.092887] pci_bus 0000:00: on NUMA node 0 <7>[ 0.092912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <6>[ 0.101771] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) <6>[ 0.102607] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11) <6>[ 0.103294] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled. <6>[ 0.104160] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0 <5>[ 0.105237] SCSI subsystem initialized <7>[ 0.105502] libata version 3.00 loaded. <6>[ 0.105893] usbcore: registered new interface driver usbfs <6>[ 0.106000] usbcore: registered new interface driver hub <6>[ 0.106143] usbcore: registered new device driver usb <6>[ 0.106850] ACPI: WMI: Mapper loaded <6>[ 0.106863] PCI: Using ACPI for IRQ routing <6>[ 0.107812] Bluetooth: Core ver 2.15 <6>[ 0.107961] NET: Registered protocol family 31 <6>[ 0.107975] Bluetooth: HCI device and connection manager initialized <6>[ 0.108025] Bluetooth: HCI socket layer initialized <6>[ 0.108040] NetLabel: Initializing <6>[ 0.108053] NetLabel: domain hash size = 128 <6>[ 0.108067] NetLabel: protocols = UNLABELED CIPSOv4 <6>[ 0.108143] NetLabel: unlabeled traffic allowed by default <6>[ 0.116697] pnp: PnP ACPI init <6>[ 0.116759] ACPI: bus type pnp registered <4>[ 0.119586] pnp 00:02: io resource (0x10-0x1f) overlaps 0000:00:0f.0 BAR 3 (0x0-0x1f), disabling <6>[ 0.120535] pnp: PnP ACPI: found 7 devices <6>[ 0.120551] ACPI: ACPI bus type pnp unregistered <6>[ 0.120571] PnPBIOS: Disabled by ACPI PNP <6>[ 0.120627] system 00:00: iomem range 0xf0000-0xfffff could not be reserved <6>[ 0.120654] system 00:00: iomem range 0x37fb0000-0x37fbffff could not be reserved <6>[ 0.120681] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved <6>[ 0.120707] system 00:00: iomem range 0x0-0x9ffff could not be reserved <6>[ 0.120732] system 00:00: iomem range 0x100000-0x37faffff could not be reserved <6>[ 0.120759] system 00:00: iomem range 0x40400000-0x4043ffff has been reserved <6>[ 0.120785] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved <6>[ 0.120831] system 00:02: ioport range 0x4d0-0x4d1 has been reserved <6>[ 0.120856] system 00:02: ioport range 0x480-0x48f has been reserved <6>[ 0.156303] AppArmor: AppArmor Filesystem Enabled <7>[ 0.156438] pci_bus 0000:00: resource 0 io: [0x00-0xffff] <7>[ 0.156460] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] <6>[ 0.156666] NET: Registered protocol family 2 <6>[ 0.157274] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.159266] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.162470] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 0.164117] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 0.164136] TCP reno registered <6>[ 0.164523] NET: Registered protocol family 1 <6>[ 0.164813] Trying to unpack rootfs image as initramfs... <7>[ 0.660117] Switched to high resolution mode on CPU 0 <6>[ 1.584429] Freeing initrd memory: 7825k freed <6>[ 1.593536] cpufreq-nforce2: No nForce2 chipset. <6>[ 1.593667] Scanning for low memory corruption every 60 seconds <6>[ 1.594209] audit: initializing netlink socket (disabled) <5>[ 1.594261] type=2000 audit(1256844437.592:1): initialized <4>[ 1.658441] highmem bounce pool size: 64 pages <6>[ 1.658476] HugeTLB registered 4 MB page size, pre-allocated 0 pages <5>[ 1.670852] VFS: Disk quotas dquot_6.5.2 <4>[ 1.671268] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 1.676068] fuse init (API version 7.12) <6>[ 1.676666] msgmni has been set to 1607 <6>[ 1.677772] alg: No test for stdrng (krng) <6>[ 1.677842] io scheduler noop registered <6>[ 1.677858] io scheduler anticipatory registered <6>[ 1.677874] io scheduler deadline registered <6>[ 1.678199] io scheduler cfq registered (default) <7>[ 1.678297] pci 0000:00:01.1: Boot video device <6>[ 1.692468] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>[ 1.692629] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 <6>[ 1.693227] ACPI: AC Adapter [AC] (on-line) <6>[ 1.693605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 <6>[ 1.693629] ACPI: Power Button [PWRF] <6>[ 1.694283] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 <6>[ 1.694306] ACPI: Power Button [PWRB] <6>[ 1.694613] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 <6>[ 1.694879] ACPI: Sleep Button [SLPB] <6>[ 1.695623] processor LNXCPU:00: registered as cooling_device0 <6>[ 1.699209] isapnp: Scanning for PnP cards... <6>[ 2.054660] isapnp: No Plug & Play device found <6>[ 2.062306] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 2.070065] brd: module loaded <6>[ 2.073316] loop: module loaded <6>[ 2.073813] input: Macintosh mouse button emulation as /devices/virtual/input/input3 <7>[ 2.075341] pata_amd 0000:00:0f.2: version 0.4.1 <6>[ 2.075907] scsi0 : pata_amd <6>[ 2.076433] scsi1 : pata_amd <6>[ 2.077388] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 <6>[ 2.077411] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 <6>[ 2.082435] Fixed MDIO Bus: probed <6>[ 2.082676] PPP generic driver version 2.4.2 <6>[ 2.083212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <4>[ 2.085498] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11 <4>[ 2.085521] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 <7>[ 2.085539] PCI: setting IRQ 11 as level-triggered <6>[ 2.085566] ehci_hcd 0000:00:0f.5: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 <7>[ 2.085667] ehci_hcd 0000:00:0f.5: setting latency timer to 64 <6>[ 2.085710] ehci_hcd 0000:00:0f.5: EHCI Host Controller <6>[ 2.085997] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1 <6>[ 2.108275] ehci_hcd 0000:00:0f.5: irq 11, io mem 0xefffd000 <6>[ 2.120071] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00 <6>[ 2.120496] usb usb1: configuration #1 chosen from 1 choice <6>[ 2.120680] hub 1-0:1.0: USB hub found <6>[ 2.120719] hub 1-0:1.0: 4 ports detected <6>[ 2.121061] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 2.121237] ohci_hcd 0000:00:0f.4: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 <7>[ 2.121327] ohci_hcd 0000:00:0f.4: setting latency timer to 64 <6>[ 2.121369] ohci_hcd 0000:00:0f.4: OHCI Host Controller <6>[ 2.121556] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2 <6>[ 2.121617] ohci_hcd 0000:00:0f.4: irq 11, io mem 0xefffe000 <6>[ 2.182402] usb usb2: configuration #1 chosen from 1 choice <6>[ 2.182580] hub 2-0:1.0: USB hub found <6>[ 2.182620] hub 2-0:1.0: 4 ports detected <6>[ 2.182893] uhci_hcd: USB Universal Host Controller Interface driver <6>[ 2.183348] PNP: No PS/2 controller found. Probing ports directly. <3>[ 3.060644] i8042.c: Can't read CTR while initializing i8042. <4>[ 3.061081] i8042: probe of i8042 failed with error -5 <6>[ 3.061406] mice: PS/2 mouse device common for all mice <6>[ 3.062724] rtc_cmos 00:04: RTC can wake from S4 <6>[ 3.062916] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 <6>[ 3.062974] rtc0: alarms up to one day, 242 bytes nvram <6>[ 3.063507] device-mapper: uevent: version 1.0.3 <6>[ 3.064107] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com <6>[ 3.064402] device-mapper: multipath: version 1.1.0 loaded <6>[ 3.064421] device-mapper: multipath round-robin: version 1.0.0 loaded <6>[ 3.065134] EISA: Probing bus 0 at eisa.0 <4>[ 3.065161] Cannot allocate resource for EISA slot 1 <4>[ 3.065214] Cannot allocate resource for EISA slot 6 <6>[ 3.065249] EISA: Detected 0 cards. <6>[ 3.065482] cpuidle: using governor ladder <6>[ 3.065497] cpuidle: using governor menu <6>[ 3.069763] TCP cubic registered <6>[ 3.070941] NET: Registered protocol family 10 <6>[ 3.074236] lo: Disabled Privacy Extensions <6>[ 3.076135] ata1.00: ATA-7: FUJITSU MHW2040AT, 0000000B, max UDMA/100 <6>[ 3.076159] ata1.00: 78140160 sectors, multi 16: LBA <6>[ 3.077459] NET: Registered protocol family 17 <6>[ 3.077569] Bluetooth: L2CAP ver 2.13 <6>[ 3.077582] Bluetooth: L2CAP socket layer initialized <6>[ 3.077603] Bluetooth: SCO (Voice Link) ver 0.6 <6>[ 3.077617] Bluetooth: SCO socket layer initialized <6>[ 3.077774] Bluetooth: RFCOMM TTY layer initialized <6>[ 3.077795] Bluetooth: RFCOMM socket layer initialized <6>[ 3.077810] Bluetooth: RFCOMM ver 1.11 <6>[ 3.077870] powernow-k8: Processor cpuid 5a2 not supported <6>[ 3.077966] Using IPI No-Shortcut mode <7>[ 3.078437] PM: Resume from disk failed. <4>[ 3.078494] registered taskstats version 1 <4>[ 3.079059] Magic number: 13:147:497 <6>[ 3.079256] rtc_cmos 00:04: setting system clock to 2009-10-29 19:27:20 UTC (1256844440) <6>[ 3.079279] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found <6>[ 3.079295] EDD information not available. <6>[ 3.092604] ata1.00: configured for UDMA/100 <5>[ 3.093106] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2040A 0000 PQ: 0 ANSI: 5 <5>[ 3.093843] sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>[ 3.094054] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) <5>[ 3.094308] sd 0:0:0:0: [sda] Write Protect is off <7>[ 3.094330] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>[ 3.094463] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 3.095141] sda: <7>[ 3.095745] ata2: port disabled. ignoring. <4>[ 3.174453] sda1 sda2 < sda5 > <5>[ 3.203558] sd 0:0:0:0: [sda] Attached SCSI disk <6>[ 3.203637] Freeing unused kernel memory: 540k freed <6>[ 3.205035] Write protecting the kernel text: 4568k <6>[ 3.205322] Write protecting the kernel read-only data: 1840k <6>[ 3.600102] usb 2-3: new low speed USB device using ohci_hcd and address 2 <6>[ 3.825609] usb 2-3: configuration #1 chosen from 1 choice <6>[ 4.186269] usb 2-4: new low speed USB device using ohci_hcd and address 3 <6>[ 4.565328] usb 2-4: configuration #1 chosen from 1 choice <6>[ 4.592121] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) <6>[ 4.592227] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too <6>[ 4.721685] 8139too Fast Ethernet driver 0.9.28 <4>[ 4.723884] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 <6>[ 4.723914] 8139too 0000:00:0d.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 <6>[ 4.728692] eth0: RealTek RTL8139 at 0xfc00, 00:40:ca:9d:f0:50, IRQ 11 <6>[ 4.784946] usbcore: registered new interface driver hiddev <6>[ 4.793587] input: Key Tronic Keytronic USB Keyboard as /devices/pci0000:00/0000:00:0f.4/usb2/2-3/2-3:1.0/input/input4 <6>[ 4.793940] generic-usb 0003:03F9:0100.0001: input,hidraw0: USB HID v1.10 Keyboard [Key Tronic Keytronic USB Keyboard] on usb-0000:00:0f.4-3/input0 <6>[ 4.801267] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0f.4/usb2/2-4/2-4:1.0/input/input5 <6>[ 4.801702] generic-usb 0003:046D:C00E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0f.4-4/input0 <6>[ 4.801800] usbcore: registered new interface driver usbhid <6>[ 4.801822] usbhid: v2.6:USB HID core driver <6>[ 5.056249] vesafb: framebuffer at 0xd0000000, mapped to 0xf8100000, using 10240k, total 131072k <6>[ 5.056278] vesafb: mode is 1280x1024x32, linelength=5120, pages=2 <6>[ 5.056296] vesafb: protected mode interface info at c000:6dde <6>[ 5.056315] vesafb: pmi: set display start = c00c6e05, set palette = c00c6eb1 <6>[ 5.056332] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d403 d503 da03 1c03 1dac 1eac 1fac ffac <6>[ 5.056427] vesafb: scrolling: redraw <6>[ 5.056449] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 <6>[ 5.056732] fb0: VESA VGA frame buffer device <4>[ 5.121723] Console: switching to colour frame buffer device 160x64 <6>[ 6.851765] PM: Starting manual resume from disk <7>[ 6.851791] PM: Resume from partition 8:5 <7>[ 6.851804] PM: Checking hibernation image. <7>[ 6.852197] PM: Resume from disk failed. <6>[ 6.925131] kjournald starting. Commit interval 5 seconds <6>[ 6.925188] EXT3-fs: mounted filesystem with writeback data mode. <5>[ 8.522636] type=1505 audit(1256844445.940:2): operation="profile_load" pid=340 name=/sbin/dhclient3 <5>[ 8.524207] type=1505 audit(1256844445.944:3): operation="profile_load" pid=340 name=/usr/lib/NetworkManager/nm-dhcp-client.action <5>[ 8.525107] type=1505 audit(1256844445.944:4): operation="profile_load" pid=340 name=/usr/lib/connman/scripts/dhclient-script <5>[ 8.701325] type=1505 audit(1256844446.120:5): operation="profile_load" pid=341 name=/usr/bin/evince <5>[ 8.737590] type=1505 audit(1256844446.156:6): operation="profile_load" pid=341 name=/usr/bin/evince-previewer <5>[ 8.753912] type=1505 audit(1256844446.172:7): operation="profile_load" pid=341 name=/usr/bin/evince-thumbnailer <5>[ 8.813862] type=1505 audit(1256844446.232:8): operation="profile_load" pid=342 name=/usr/lib/cups/backend/cups-pdf <5>[ 8.815983] type=1505 audit(1256844446.232:9): operation="profile_load" pid=342 name=/usr/sbin/cupsd <5>[ 8.837644] type=1505 audit(1256844446.256:10): operation="profile_load" pid=343 name=/usr/sbin/tcpdump <6>[ 11.611496] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k <6>[ 12.155759] EXT3 FS on sda1, internal journal <6>[ 14.025057] udev: starting version 147 <6>[ 17.494574] AMD Geode RNG detected <4>[ 17.590698] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 <7>[ 17.590720] PCI: setting IRQ 10 as level-triggered <6>[ 17.590748] Geode LX AES 0000:00:01.2: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 <7>[ 17.595303] cs5535_gpio: base=0x6100 mask=0xb003c66 major=251 <5>[ 18.673154] padlock: VIA PadLock not detected. <5>[ 19.263945] geode-aes: GEODE AES engine enabled. <6>[ 19.845863] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 20.449184] cs5535audio 0000:00:0f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 <7>[ 20.449287] cs5535audio 0000:00:0f.3: setting latency timer to 64 <6>[ 32.102787] lp: driver loaded but no devices found <6>[ 32.278261] ppdev: user-space parallel port driver <6>[ 44.000089] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 <3>[ 46.520449] snd-malloc: invalid device type 0 <3>[ 46.523179] snd-malloc: invalid device type 0 <3>[ 46.539526] snd-malloc: invalid device type 0 <3>[ 46.545939] snd-malloc: invalid device type 0 <3>[ 46.548798] snd-malloc: invalid device type 0 <3>[ 46.559474] snd-malloc: invalid device type 0 <3>[ 46.564112] snd-malloc: invalid device type 0 <3>[ 46.572106] snd-malloc: invalid device type 0 <3>[ 46.576182] snd-malloc: invalid device type 0 <3>[ 46.582111] snd-malloc: invalid device type 0 <3>[ 46.586944] snd-malloc: invalid device type 0 <3>[ 46.595377] snd-malloc: invalid device type 0 <3>[ 46.601033] snd-malloc: invalid device type 0 <3>[ 46.604994] snd-malloc: invalid device type 0 <3>[ 46.609716] snd-malloc: invalid device type 0 <3>[ 46.624389] snd-malloc: invalid device type 0 <3>[ 46.629113] snd-malloc: invalid device type 0 <3>[ 46.634081] snd-malloc: invalid device type 0 <3>[ 46.645957] snd-malloc: invalid device type 0 <3>[ 46.653169] snd-malloc: invalid device type 0 <3>[ 46.773787] snd-malloc: invalid device type 0 <3>[ 46.776610] snd-malloc: invalid device type 0 <3>[ 46.780924] snd-malloc: invalid device type 0 <3>[ 46.790154] snd-malloc: invalid device type 0