[ 0.000000] Bootdata ok (command line is root=/dev/hda6 ro quiet noapic lapic splash) [ 0.000000] Linux version 2.6.15-18-amd64-generic (buildd@yellow) (gcc version 4.0.3 20060304 (prerelease) (Ubuntu 4.0.2-10ubuntu1)) #1 SMP PREEMPT Thu Mar 9 14:37:22 UTC 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f76b0 [ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x01000606 MSFT 0x00000097) @ 0x000000003ffd0000 [ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x01000606 MSFT 0x00000097) @ 0x000000003ffd0200 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x01000606 MSFT 0x00000097) @ 0x000000003ffd0390 [ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x01000606 MSFT 0x00000097) @ 0x000000003ffd03f0 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x01000606 MSFT 0x00000097) @ 0x000000003ffde040 [ 0.000000] ACPI: DSDT (v001 1ABZX 1ABZX001 0x00000001 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ffd0000 [ 0.000000] Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003ffd0000 [ 0.000000] No mptable found. [ 0.000000] On node 0 totalpages: 257496 [ 0.000000] DMA zone: 3023 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 254473 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 16 [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option. [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ 3d2000000 size 32 MB [ 0.000000] Aperture from northbridge cpu 0 too small (32 MB) [ 0.000000] No AGP bridge found [ 0.000000] SMP: Allowing 3 CPUs, 2 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/hda6 ro quiet noapic lapic splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 1600.084 MHz processor. [ 17.202656] Console: colour VGA+ 80x25 [ 17.203860] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.204691] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 17.221593] Memory: 1021344k/1048384k available (2128k kernel code, 26652k reserved, 750k data, 180k init) [ 17.281284] Calibrating delay using timer specific routine.. 3202.70 BogoMIPS (lpj=1601352) [ 17.281352] Security Framework v1.0.0 initialized [ 17.281360] SELinux: Disabled at boot. [ 17.281388] Mount-cache hash table entries: 256 [ 17.281528] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 17.281532] CPU: L2 Cache: 1024K (64 bytes/line) [ 17.281535] CPU 0(1) -> Node 0 -> Core 0 [ 17.281544] mtrr: v2.0 (20020519) [ 17.281553] SMP alternatives: switching to UP code [ 17.282022] checking if image is initramfs... it is [ 17.938495] Freeing initrd memory: 6812k freed [ 17.946468] ACPI: Looking for DSDT ... not found! [ 17.950226] ACPI: setting ELCR to 0200 (from 0c30) [ 17.951471] SMP motherboard not detected. [ 17.951479] Using local APIC timer interrupts. [ 18.013885] Detected 12.500 MHz APIC timer. [ 18.013898] testing NMI watchdog ... OK. [ 18.023887] SMP disabled [ 18.023951] Brought up 1 CPUs [ 18.023959] time.c: Using PIT/TSC based timekeeping. [ 18.023962] testing NMI watchdog ... OK. [ 28.009032] NET: Registered protocol family 16 [ 28.009058] ACPI: bus type pci registered [ 28.009066] PCI: Using configuration type 1 [ 28.014060] PCI: Using MMCONFIG at e0000000 [ 28.014708] ACPI: Subsystem revision 20051216 [ 28.053515] ACPI: Interpreter enabled [ 28.053518] ACPI: Using PIC for interrupt routing [ 28.054697] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 28.054700] PCI: Probing PCI hardware (bus 00) [ 28.057626] Boot video device is 0000:01:00.0 [ 28.057705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 28.082983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 28.086226] ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode. [ 28.091001] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15) [ 28.091371] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15) [ 28.091724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15) [ 28.092078] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) [ 28.092449] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15) [ 28.092803] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15) [ 28.093171] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15) [ 28.093525] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15) [ 28.093929] ACPI: Power Resource [GFAN] (off) [ 28.093955] Linux Plug and Play Support v0.97 (c) Adam Belay [ 28.093967] pnp: PnP ACPI init [ 28.094037] pnp: PnPACPI: unknown resource type 7 [ 28.094040] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200 [ 28.094051] pnp: PnPACPI: unknown resource type 7 [ 28.094053] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00 [ 28.094150] pnp: PnPACPI: unknown resource type 7 [ 28.094152] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303 [ 28.094314] pnp: PnPACPI: unknown resource type 7 [ 28.094316] pnp: PnPACPI: METHOD_NAME__CRS failure for SYN0a04 [ 28.094324] pnp: PnPACPI: unknown resource type 7 [ 28.094326] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800 [ 28.094334] pnp: PnPACPI: unknown resource type 7 [ 28.094336] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04 [ 28.095053] pnp: PnPACPI: unknown resource type 7 [ 28.095055] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0510 [ 28.095515] pnp: PnPACPI: unknown resource type 7 [ 28.095517] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0401 [ 28.095748] pnp: PnPACPI: unknown resource type 7 [ 28.095750] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 [ 28.096100] pnp: PnPACPI: unknown resource type 7 [ 28.096102] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 [ 28.096245] pnp: PnPACPI: unknown resource type 7 [ 28.096248] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 [ 28.096346] pnp: PnPACPI: unknown resource type 7 [ 28.096348] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 [ 28.096832] pnp: PnPACPI: unknown resource type 7 [ 28.096835] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01 [ 28.097356] pnp: PnP ACPI: found 1 devices [ 28.097373] PCI: Using ACPI for IRQ routing [ 28.097377] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 28.097478] PCI-DMA: Disabling IOMMU. [ 28.098832] PCI: Bridge: 0000:00:01.0 [ 28.098834] IO window: disabled. [ 28.098839] MEM window: fa200000-fe2fffff [ 28.098843] PREFETCH window: bde00000-ddefffff [ 28.098847] PCI: Bus 2, cardbus bridge: 0000:00:0a.0 [ 28.098850] IO window: 00001000-000010ff [ 28.098853] IO window: 00001400-000014ff [ 28.098857] PREFETCH window: 50000000-51ffffff [ 28.098861] MEM window: 52000000-53ffffff [ 28.098875] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 28.099116] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 28.099119] PCI: setting IRQ 5 as level-triggered [ 28.099122] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 28.099345] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 28.099663] audit: initializing netlink socket (disabled) [ 28.099672] audit(1142880060.914:1): initialized [ 28.099819] VFS: Disk quotas dquot_6.5.1 [ 28.099841] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 28.099907] Initializing Cryptographic API [ 28.099911] io scheduler noop registered [ 28.099919] io scheduler anticipatory registered [ 28.099926] io scheduler deadline registered [ 28.099942] io scheduler cfq registered [ 28.101485] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 28.101491] pcie_portdrv_probe->Dev[0004:1039] has invalid IRQ. Check vendor BIOS [ 28.101515] assign_interrupt_mode Found MSI capability [ 28.101556] Allocate Port Service[pcie00] [ 28.115924] Linux agpgart interface v0.101 (c) Dave Jones [ 28.116063] PNP: No PS/2 controller found. Probing ports directly. [ 28.117771] i8042.c: Detected active multiplexing controller, rev 1.1. [ 28.118740] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 28.118945] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 28.119147] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 28.119290] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 28.119842] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.119876] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 28.120027] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 28.120599] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 28.120603] PCI: setting IRQ 11 as level-triggered [ 28.120607] ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 28.120617] ACPI: PCI interrupt for device 0000:00:02.6 disabled [ 28.121000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.121061] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 28.121065] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 28.121070] ACPI: bus type ide registered [ 28.121288] mice: PS/2 mouse device common for all mice [ 28.121708] NET: Registered protocol family 2 [ 28.130203] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 28.130665] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 28.132940] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 28.134088] TCP: Hash tables configured (established 131072 bind 65536) [ 28.134092] TCP reno registered [ 28.134193] TCP bic registered [ 28.134202] NET: Registered protocol family 1 [ 28.134211] NET: Registered protocol family 8 [ 28.134213] NET: Registered protocol family 20 [ 28.134431] ACPI wakeup devices: [ 28.134434] PCI0 PS2K PS2M UAR2 AC97 MC97 MAC CBS0 P394 MPCI EUSB USB USB2 USB3 SLPB [ 28.134447] ACPI: (supports S0 S1 S3 S4 S5) [ 28.134517] Freeing unused kernel memory: 180k freed [ 28.194755] vga16fb: initializing [ 28.194761] vga16fb: mapped to 0xffff8100000a0000 [ 28.279835] input: AT Translated Set 2 keyboard as /class/input/input0 [ 28.413203] Console: switching to colour frame buffer device 80x25 [ 28.413208] fb0: VGA16 VGA frame buffer device [ 29.573899] Capability LSM initialized [ 29.599924] ACPI: Fan [FN00] (off) [ 29.603131] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 29.603137] ACPI: Processor [CPU1] (supports 8 throttling states) [ 29.619414] ACPI: Thermal Zone [THRM] (61 C) [ 29.951107] SIS5513: IDE controller at PCI slot 0000:00:02.5 [ 29.951131] SIS5513: chipset revision 1 [ 29.951134] SIS5513: not 100% native mode: will probe irqs later [ 29.951147] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller [ 29.951160] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA [ 29.951171] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA [ 29.951180] Probing IDE interface ide0... [ 30.214706] hda: FUJITSU MHV2100AT PL, ATA DISK drive [ 30.829188] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 30.829312] Probing IDE interface ide1... [ 31.499545] hdc: TSSTcorpCD/DVDW TS-L532U, ATAPI CD/DVD-ROM drive [ 32.128749] ide1 at 0x170-0x177,0x376 on irq 15 [ 32.134463] hda: max request size: 128KiB [ 32.208283] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 32.212999] hda: cache flushes supported [ 32.213125] hda: hda1 hda2 hda3 < hda5 hda6 hda7 > [ 32.284039] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 32.284059] Uniform CD-ROM driver Revision: 3.20 [ 32.700486] usbcore: registered new driver usbfs [ 32.700755] usbcore: registered new driver hub [ 32.702881] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 32.703895] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 [ 32.703900] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 [ 32.704240] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 32.705344] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 32.705353] ohci_hcd 0000:00:03.0: irq 5, io mem 0xfebff000 [ 32.759150] hub 1-0:1.0: USB hub found [ 32.759164] hub 1-0:1.0: 3 ports detected [ 32.859559] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 4 [ 32.859563] PCI: setting IRQ 4 as level-triggered [ 32.859567] ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 4 (level, low) -> IRQ 4 [ 32.859883] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 32.860116] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 32.860126] ohci_hcd 0000:00:03.1: irq 4, io mem 0xfebfe000 [ 32.913228] hub 2-0:1.0: USB hub found [ 32.913239] hub 2-0:1.0: 3 ports detected [ 33.014242] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5 [ 33.014246] ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5 [ 33.014405] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 33.014639] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 33.014648] ohci_hcd 0000:00:03.2: irq 5, io mem 0xfebfd000 [ 33.066975] hub 3-0:1.0: USB hub found [ 33.066985] hub 3-0:1.0: 2 ports detected [ 33.075726] usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 33.170372] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 [ 33.170377] ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5 [ 33.170892] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 33.170933] PCI: cache line size of 64 is not supported by device 0000:00:03.3 [ 33.171190] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 [ 33.171199] ehci_hcd 0000:00:03.3: irq 5, io mem 0xfebfc000 [ 33.171210] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.171453] hub 4-0:1.0: USB hub found [ 33.171462] hub 4-0:1.0: 8 ports detected [ 33.479125] Attempting manual resume [ 33.511305] EXT3-fs: mounted filesystem with ordered data mode. [ 33.529679] kjournald starting. Commit interval 5 seconds [ 33.594854] usb 1-2: device not accepting address 2, error -110 [ 34.062072] usb 4-4: new high speed USB device using ehci_hcd and address 2 [ 34.729826] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 37.319803] usb 1-1: new low speed USB device using ohci_hcd and address 4 [ 44.992184] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 44.999605] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 45.410993] nvidia: module license 'NVIDIA' taints kernel. [ 45.422440] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 45.422445] PCI: setting IRQ 10 as level-triggered [ 45.422450] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 45.422460] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 45.422837] NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:58:07 PST 2005 [ 45.427084] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 45.427097] Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1107] [ 45.439023] sdhci: Secure Digital Host Controller Interface driver, 0.10 [ 45.439027] sdhci: Copyright(c) Pierre Ossman [ 45.489571] ieee80211_crypt: registered algorithm 'NULL' [ 45.491192] ieee80211: 802.11 data/management/control stack, git-1.1.7 [ 45.491195] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 45.549564] Yenta: ISA IRQ mask 0x0088, PCI irq 5 [ 45.549569] Socket status: 30000006 [ 45.686283] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 45.686289] ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 45.754299] ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 45.782509] sdhci: ============== REGISTER DUMP ============== [ 45.782513] sdhci: Sys addr: 0x00000000 | Version: 0x00000200 [ 45.782517] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 45.782520] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 45.782524] sdhci: Present: 0x01fa0000 | Host ctl: 0x00000000 [ 45.782527] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [ 45.782531] sdhci: Walk up: 0x00000000 | Clock: 0x00000000 [ 45.782534] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 45.782538] sdhci: Int enab: 0xe1ff00cf | Sig enab: 0xe1ff00cf [ 45.782542] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 45.782546] sdhci: Caps: 0x018021a1 | Max curr: 0x00000040 [ 45.782548] sdhci: =========================================== [ 45.832722] mmc0: SDHCI at 0xfebfa400 irq 5 DMA [ 45.912959] ieee1394: Initialized config rom entry `ip1394' [ 45.974786] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.10 [ 45.974791] ipw2200: Copyright(c) 2003-2005 Intel Corporation [ 46.116914] usbcore: registered new driver hiddev [ 46.133636] input: Mega World Thrustmaster dual analog 3.2 as /class/input/input1 [ 46.133748] input: USB HID v1.10 Gamepad [Mega World Thrustmaster dual analog 3.2] on usb-0000:00:03.1-2 [ 46.145436] input: Logitech Optical USB Mouse as /class/input/input2 [ 46.145672] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.0-1 [ 46.145682] usbcore: registered new driver usbhid [ 46.145685] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 46.205751] ts: Compaq touchscreen protocol output [ 46.315826] intel8x0_measure_ac97_clock: measured 50436 usecs [ 46.315830] intel8x0: clocking to 48000 [ 46.317535] ohci1394: $Rev: 1313 $ Ben Collins [ 46.317555] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 46.359800] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 46.360261] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 46.396264] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[febfa800-febfafff] Max Packet=[2048] [ 46.403914] r8169 Gigabit Ethernet driver 2.2LK loaded [ 46.403943] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 46.481814] usbcore: registered new driver snd-usb-audio [ 46.656651] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 [ 46.695366] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 46.952929] eth1: Identified chip type is 'RTL8169s/8110s'. [ 46.952937] eth1: RTL8169 at 0xffffc2000007cc00, 00:15:f2:22:8f:3c, IRQ 5 [ 47.472039] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] [ 47.594349] parport0: irq 7 detected [ 47.660970] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003452a64] [ 47.686634] lp0: using parport0 (polling). [ 47.723832] Real Time Clock Driver v1.12 [ 47.773766] SCSI subsystem initialized [ 47.789081] sbp2: $Rev: 1306 $ Ben Collins [ 47.789086] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 47.789089] ieee1394: sbp2: Try serialize_io=0 for better performance [ 47.873197] Adding 2008084k swap on /dev/hda5. Priority:-1 extents:1 across:2008084k [ 48.056879] EXT3 FS on hda6, internal journal [ 48.192121] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 48.192126] md: bitmap version 4.39 [ 48.534408] NET: Registered protocol family 17 [ 48.733127] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [ 49.518146] cdrom: open failed. [ 49.970954] NET: Registered protocol family 10 [ 49.971088] lo: Disabled Privacy Extensions [ 49.971263] IPv6 over IPv4 tunneling driver [ 50.473833] kjournald starting. Commit interval 5 seconds [ 50.474046] EXT3 FS on hda7, internal journal [ 50.474052] EXT3-fs: mounted filesystem with ordered data mode. [ 53.254182] ACPI: AC Adapter [AC0] (on-line) [ 53.299772] ACPI: Battery Slot [BAT0] (battery present) [ 53.345755] Asus Laptop ACPI Extras version 0.29 [ 53.346051] no string returned by INIT [ 53.346054] trying default values, supply the developers with your DSDT [ 53.375350] ACPI: Power Button (FF) [PWRF] [ 53.375376] ACPI: Power Button (CM) [PWRB] [ 53.375385] ACPI: Lid Switch [LID] [ 53.375394] ACPI: Sleep Button (CM) [SLPB] [ 53.463841] ibm_acpi: ec object not found [ 53.560596] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 54.025779] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) [ 54.028941] powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x16 (1000 mV) [ 54.028945] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa (1300 mV) [ 54.028949] cpu_init done, current fid 0x8, vid 0xa [ 55.746109] spurious 8259A interrupt: IRQ7. [ 60.490734] eth0: no IPv6 routers present [ 60.533515] ip_tables: (C) 2000-2002 Netfilter core team [ 60.581210] Netfilter messages via NETLINK v0.30. [ 60.591133] ip_conntrack version 2.4 (4095 buckets, 32760 max) - 312 bytes per conntrack [ 61.918726] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 61.918735] hdc: drive_cmd: error=0x04 { AbortedCommand } [ 61.918739] ide: failed opcode was: 0xec [ 61.981921] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 61.981930] hdc: drive_cmd: error=0x04 { AbortedCommand } [ 61.981933] ide: failed opcode was: 0xec [ 62.427840] Bluetooth: Core ver 2.8 [ 62.427846] NET: Registered protocol family 31 [ 62.427848] Bluetooth: HCI device and connection manager initialized [ 62.427860] Bluetooth: HCI socket layer initialized [ 62.535020] Bluetooth: L2CAP ver 2.8 [ 62.535025] Bluetooth: L2CAP socket layer initialized [ 62.538927] Bluetooth: RFCOMM socket layer initialized [ 62.538944] Bluetooth: RFCOMM TTY layer initialized [ 62.538946] Bluetooth: RFCOMM ver 1.7