[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic (buildd@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:06 UTC 2008 (Ubuntu 2.6.27-7.16-generic) [ 0.000000] Command line: root=UUID=19d12233-898a-4204-921e-79250921897b ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037ef0000 (usable) [ 0.000000] BIOS-e820: 0000000037ef0000 - 0000000037eff000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037eff000 - 0000000037f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x37ef0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 0037e00000 page 2M [ 0.000000] 0037e00000 - 0037ef0000 page 4k [ 0.000000] kernel direct mapping tables up to 37ef0000 @ 8000-b000 [ 0.000000] last_map_addr: 37ef0000 end: 37ef0000 [ 0.000000] RAMDISK: 37649000 - 37edf5c5 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7DF0, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 37EF9524, 0034 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 37EFEE31, 0074 (r1 HP Piranha 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 37EF9558, 58D9 (r1 HP 3085 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 37EFFFC0, 0040 [ 0.000000] ACPI: MCFG 37EFEEA5, 003C (r1 ATI Piranha 6040000 LOHR 5F) [ 0.000000] ACPI: SSDT 37EFEEE1, 00CF (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 37EFEFB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037ef0000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037ef0000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [0000000000009000 - 000000000000ffdf] pages 7 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0037ef0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c] [ 0.000000] #3 [0037649000 - 0037edf5c5] RAMDISK ==> [0037649000 - 0037edf5c5] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] found SMP MP-table at [ffff8800000f7e20] 000f7e20 [ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00037ef0 [ 0.000000] On node 0 totalpages: 229007 [ 0.000000] DMA zone: 2113 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 221492 pages, LIFO batch:31 [ 0.000000] SB4X0 revision 0x10 [ 0.000000] Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 223605 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=19d12233-898a-4204-921e-79250921897b ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 997.090 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ 0 size 32 MB [ 0.004000] Memory: 885804k/916416k available (3112k kernel code, 30224k reserved, 1575k data, 536k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.18 BogoMIPS (lpj=3988360) [ 0.004073] Security Framework initialized [ 0.004090] SELinux: Disabled at boot. [ 0.004125] AppArmor: AppArmor initialized [ 0.004359] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.005793] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.006458] Mount-cache hash table entries: 256 [ 0.006795] Initializing cgroup subsys ns [ 0.006802] Initializing cgroup subsys cpuacct [ 0.006806] Initializing cgroup subsys memory [ 0.006837] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.006842] CPU: L2 Cache: 512K (64 bytes/line) [ 0.006846] CPU 0/0 -> Node 0 [ 0.006850] tseg: 0037f00000 [ 0.006887] SMP alternatives: switching to UP code [ 0.016012] Freeing SMP alternatives: 24k freed [ 0.016077] ACPI: Core revision 20080609 [ 0.020977] ACPI: Checking initramfs for custom DSDT [ 0.760549] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.800246] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00 [ 0.800254] Using local APIC timer interrupts. [ 0.804033] APIC timer calibration result 12463627 [ 0.804037] Detected 12.463 MHz APIC timer. [ 0.804169] Brought up 1 CPUs [ 0.804174] Total of 1 processors activated (1994.18 BogoMIPS). [ 0.804233] CPU0 attaching sched-domain: [ 0.804237] domain 0: span 0 level NODE [ 0.804242] groups: 0 [ 0.804778] net_namespace: 1552 bytes [ 0.804786] Booting paravirtualized kernel on bare hardware [ 0.805089] Time: 10:03:39 Date: 11/15/08 [ 0.805147] NET: Registered protocol family 16 [ 0.805726] node 0 link 0: io port [1000, fffff] [ 0.805732] TOM: 0000000040000000 aka 1024M [ 0.805738] node 0 link 0: mmio [d0000000, fff8ffff] [ 0.805743] node 0 link 0: mmio [c0000000, cfffffff] [ 0.805748] node 0 link 0: mmio [a0000, bffff] [ 0.805752] node 0 link 0: mmio [40000000, bfffffff] [ 0.805758] bus: [00,ff] on node 0 link 0 [ 0.805761] bus: 00 index 0 io port: [0, ffff] [ 0.805765] bus: 00 index 1 mmio: [40000000, fcffffffff] [ 0.805769] bus: 00 index 2 mmio: [a0000, bffff] [ 0.805784] ACPI: bus type pci registered [ 0.805974] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.805980] PCI: MCFG area at e0000000 reserved in E820 [ 0.832330] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.832336] PCI: Using configuration type 1 for base access [ 0.835148] ACPI: EC: Look up EC in DSDT [ 0.840328] ACPI: Interpreter enabled [ 0.840333] ACPI: (supports S0 S3 S4 S5) [ 0.840360] ACPI: Using IOAPIC for interrupt routing [ 0.845966] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.933227] ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62 [ 0.933232] ACPI: EC: driver started in interrupt mode [ 0.933320] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.936093] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.936099] pci 0000:00:04.0: PME# disabled [ 0.936178] PCI: 0000:00:13.0 reg 10 32bit mmio: [b0000000, b0000fff] [ 0.936289] PCI: 0000:00:13.1 reg 10 32bit mmio: [b0001000, b0001fff] [ 0.936410] PCI: 0000:00:13.2 reg 10 32bit mmio: [b0002000, b0002fff] [ 0.936481] pci 0000:00:13.2: supports D1 [ 0.936485] pci 0000:00:13.2: supports D2 [ 0.936488] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.936496] pci 0000:00:13.2: PME# disabled [ 0.936549] PCI: 0000:00:14.0 reg 10 io port: [8400, 840f] [ 0.936560] PCI: 0000:00:14.0 reg 14 32bit mmio: [b0003000, b00033ff] [ 0.936612] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.936666] PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7] [ 0.936678] PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7] [ 0.936689] PCI: 0000:00:14.1 reg 18 io port: [170, 177] [ 0.936700] PCI: 0000:00:14.1 reg 1c io port: [374, 377] [ 0.936712] PCI: 0000:00:14.1 reg 20 io port: [8410, 841f] [ 0.936912] PCI: 0000:00:14.5 reg 10 32bit mmio: [b0003400, b00034ff] [ 0.937026] PCI: 0000:00:14.6 reg 10 32bit mmio: [b0003800, b00038ff] [ 0.937250] PCI: 0000:01:05.0 reg 10 32bit mmio: [c0000000, cfffffff] [ 0.937258] PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff] [ 0.937265] PCI: 0000:01:05.0 reg 18 32bit mmio: [b0100000, b010ffff] [ 0.937280] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff] [ 0.937292] pci 0000:01:05.0: supports D1 [ 0.937295] pci 0000:01:05.0: supports D2 [ 0.937320] PCI: bridge 0000:00:01.0 io port: [9000, 9fff] [ 0.937325] PCI: bridge 0000:00:01.0 32bit mmio: [b0100000, b01fffff] [ 0.937333] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff] [ 0.940100] PCI: bridge 0000:00:04.0 io port: [0, fff] [ 0.940105] PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff] [ 0.940176] PCI: 0000:03:00.0 reg 10 32bit mmio: [b0208000, b02087ff] [ 0.940189] PCI: 0000:03:00.0 reg 14 32bit mmio: [b0200000, b0203fff] [ 0.940263] pci 0000:03:00.0: supports D1 [ 0.940266] pci 0000:03:00.0: supports D2 [ 0.940270] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 0.940279] pci 0000:03:00.0: PME# disabled [ 0.940314] PCI: 0000:03:02.0 reg 10 32bit mmio: [b0204000, b0205fff] [ 0.940437] PCI: 0000:03:04.0 reg 10 32bit mmio: [b0209000, b0209fff] [ 0.940466] pci 0000:03:04.0: supports D1 [ 0.940469] pci 0000:03:04.0: supports D2 [ 0.940473] pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.940481] pci 0000:03:04.0: PME# disabled [ 0.940541] PCI: 0000:03:04.3 reg 10 32bit mmio: [b0206000, b0207fff] [ 0.940620] pci 0000:03:04.3: supports D1 [ 0.940624] pci 0000:03:04.3: supports D2 [ 0.940627] pci 0000:03:04.3: PME# supported from D0 D1 D2 D3hot [ 0.940636] pci 0000:03:04.3: PME# disabled [ 0.940690] PCI: 0000:03:04.4 reg 10 32bit mmio: [b020a000, b020a0ff] [ 0.940704] PCI: 0000:03:04.4 reg 14 32bit mmio: [b0208c00, b0208cff] [ 0.940717] PCI: 0000:03:04.4 reg 18 32bit mmio: [b0208800, b02088ff] [ 0.940780] pci 0000:03:04.4: supports D1 [ 0.940783] pci 0000:03:04.4: supports D2 [ 0.940787] pci 0000:03:04.4: PME# supported from D0 D1 D2 D3hot [ 0.940795] pci 0000:03:04.4: PME# disabled [ 0.940857] PCI: 0000:03:06.0 reg 10 io port: [a000, a0ff] [ 0.940871] PCI: 0000:03:06.0 reg 14 32bit mmio: [b020a400, b020a4ff] [ 0.940942] pci 0000:03:06.0: supports D1 [ 0.940945] pci 0000:03:06.0: supports D2 [ 0.940949] pci 0000:03:06.0: PME# supported from D1 D2 D3hot D3cold [ 0.940957] pci 0000:03:06.0: PME# disabled [ 0.941018] pci 0000:00:14.4: transparent bridge [ 0.941029] PCI: bridge 0000:00:14.4 io port: [a000, afff] [ 0.941037] PCI: bridge 0000:00:14.4 32bit mmio: [b0200000, b02fffff] [ 0.941098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.941444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.944107] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.944495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.950245] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 0.950484] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 0.950720] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.950955] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 0.951191] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 0.951427] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 0.951662] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.951898] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 0.952235] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.952306] pnp: PnP ACPI init [ 0.952321] ACPI: bus type pnp registered [ 0.955456] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955464] pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955470] pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955476] pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955482] pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955488] pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955494] pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955500] pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955507] pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955513] pnp 00:08: io resource (0x870-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955519] pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955525] pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955531] pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955537] pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955543] pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955549] pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955556] pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955562] pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955568] pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.955574] pnp 00:08: io resource (0x280-0x293) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling [ 0.956003] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling [ 0.956011] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling [ 0.956050] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling [ 0.984179] pnp: PnP ACPI: found 10 devices [ 0.984184] ACPI: ACPI bus type pnp unregistered [ 0.984860] PCI: Using ACPI for IRQ routing [ 0.984871] pci 0000:00:04.0: BAR 7: can't allocate resource [ 0.984876] pci 0000:00:04.0: BAR 8: can't allocate resource [ 0.996072] NET: Registered protocol family 8 [ 0.996076] NET: Registered protocol family 20 [ 0.996142] NetLabel: Initializing [ 0.996146] NetLabel: domain hash size = 128 [ 0.996149] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.996179] NetLabel: unlabeled traffic allowed by default [ 0.997695] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.997699] actual entries 65586 [ 0.997957] AppArmor: AppArmor Filesystem Enabled [ 0.997993] ACPI: RTC can wake from S4 [ 1.008067] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.008074] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.008080] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 1.008102] system 00:08: ioport range 0x1080-0x1080 has been reserved [ 1.008109] system 00:08: ioport range 0x8000-0x805f has been reserved [ 1.008122] system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 1.008129] system 00:09: iomem range 0xe0000000-0xe03fffff could not be reserved [ 1.013720] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.013727] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 1.013734] pci 0000:00:01.0: MEM window: 0xb0100000-0xb01fffff [ 1.013740] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 1.013748] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 1.013752] pci 0000:00:04.0: IO window: disabled [ 1.013757] pci 0000:00:04.0: MEM window: disabled [ 1.013762] pci 0000:00:04.0: PREFETCH window: disabled [ 1.013774] pci 0000:03:04.0: CardBus bridge, secondary bus 0000:04 [ 1.013778] pci 0000:03:04.0: IO window: 0x00a400-0x00a4ff [ 1.013787] pci 0000:03:04.0: IO window: 0x00a800-0x00a8ff [ 1.013795] pci 0000:03:04.0: PREFETCH window: 0x50000000-0x53ffffff [ 1.013804] pci 0000:03:04.0: MEM window: 0x54000000-0x57ffffff [ 1.013813] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 1.013819] pci 0000:00:14.4: IO window: 0xa000-0xafff [ 1.013828] pci 0000:00:14.4: MEM window: 0xb0200000-0xb02fffff [ 1.013836] pci 0000:00:14.4: PREFETCH window: 0x00000050000000-0x00000053ffffff [ 1.013864] pci 0000:00:04.0: setting latency timer to 64 [ 1.013895] pci 0000:03:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.013906] bus: 00 index 0 io port: [0, ffff] [ 1.013910] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 1.013914] bus: 01 index 0 io port: [9000, 9fff] [ 1.013918] bus: 01 index 1 mmio: [b0100000, b01fffff] [ 1.013922] bus: 01 index 2 mmio: [c0000000, cfffffff] [ 1.013926] bus: 01 index 3 mmio: [0, 0] [ 1.013930] bus: 02 index 0 mmio: [0, fff] [ 1.013933] bus: 02 index 1 mmio: [0, fffff] [ 1.013937] bus: 02 index 2 mmio: [0, 0] [ 1.013940] bus: 02 index 3 mmio: [0, 0] [ 1.013944] bus: 03 index 0 io port: [a000, afff] [ 1.013948] bus: 03 index 1 mmio: [b0200000, b02fffff] [ 1.013952] bus: 03 index 2 mmio: [50000000, 53ffffff] [ 1.013956] bus: 03 index 3 io port: [0, ffff] [ 1.013960] bus: 03 index 4 mmio: [0, ffffffffffffffff] [ 1.013964] bus: 04 index 0 io port: [a400, a4ff] [ 1.013968] bus: 04 index 1 io port: [a800, a8ff] [ 1.013972] bus: 04 index 2 mmio: [50000000, 53ffffff] [ 1.013976] bus: 04 index 3 mmio: [54000000, 57ffffff] [ 1.014010] NET: Registered protocol family 2 [ 1.052184] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 1.053253] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 1.056121] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.057444] TCP: Hash tables configured (established 131072 bind 65536) [ 1.057449] TCP reno registered [ 1.068196] NET: Registered protocol family 1 [ 1.068426] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 1.792659] it is [ 2.571676] Freeing initrd memory: 8793k freed [ 2.584783] audit: initializing netlink socket (disabled) [ 2.584807] type=2000 audit(1226743419.584:1): initialized [ 2.596550] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.601827] VFS: Disk quotas dquot_6.5.1 [ 2.602007] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.602226] msgmni has been set to 1747 [ 2.602480] io scheduler noop registered [ 2.602484] io scheduler anticipatory registered [ 2.602487] io scheduler deadline registered [ 2.602736] io scheduler cfq registered (default) [ 2.602751] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 2.602835] pci 0000:01:05.0: Boot video device [ 2.603058] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 2.603087] pcieport-driver 0000:00:04.0: found MSI capability [ 2.603093] pci_express 0000:00:04.0:pcie00: allocate port service [ 2.603183] pci_express 0000:00:04.0:pcie01: allocate port service [ 2.653339] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support [ 2.725310] Linux agpgart interface v0.103 [ 2.725321] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.726425] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.726437] serial 0000:00:14.6: PCI INT B disabled [ 2.729573] brd: module loaded [ 2.729715] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 2.729937] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 2.738777] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.738786] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.752221] mice: PS/2 mouse device common for all mice [ 2.752466] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.752500] rtc0: alarms up to one month [ 2.752578] cpuidle: using governor ladder [ 2.752582] cpuidle: using governor menu [ 2.753462] TCP cubic registered [ 2.753873] registered taskstats version 1 [ 2.754113] Magic number: 0:729:72 [ 2.754320] rtc_cmos 00:04: setting system clock to 2008-11-15 10:03:41 UTC (1226743421) [ 2.754326] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.754330] EDD information not available. [ 2.754421] Freeing unused kernel memory: 536k freed [ 2.754880] Write protecting the kernel read-only data: 4348k [ 2.760624] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 3.053458] fuse init (API version 7.9) [ 3.244622] processor ACPI0007:00: registered as cooling_device0 [ 3.244632] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.251814] thermal LNXTHERM:01: registered as thermal_zone0 [ 3.265072] ACPI: Thermal Zone [THRM] (51 C) [ 4.228526] usbcore: registered new interface driver usbfs [ 4.228581] usbcore: registered new interface driver hub [ 4.228662] usbcore: registered new device driver usb [ 4.232331] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.232386] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.232410] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 4.232498] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 4.232542] ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0000000 [ 4.292309] usb usb1: configuration #1 chosen from 1 choice [ 4.292382] hub 1-0:1.0: USB hub found [ 4.292405] hub 1-0:1.0: 4 ports detected [ 4.337403] No dock devices found. [ 4.396501] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.396534] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 4.396585] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 4.396615] ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0001000 [ 4.450074] SCSI subsystem initialized [ 4.456669] usb usb2: configuration #1 chosen from 1 choice [ 4.456731] hub 2-0:1.0: USB hub found [ 4.456754] hub 2-0:1.0: 4 ports detected [ 4.560518] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.560545] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 4.560595] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 4.560681] ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0002000 [ 4.577718] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.577983] usb usb3: configuration #1 chosen from 1 choice [ 4.578044] hub 3-0:1.0: USB hub found [ 4.578063] hub 3-0:1.0: 8 ports detected [ 4.627232] libata version 3.00 loaded. [ 4.639438] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.680863] b43-pci-bridge 0000:03:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.684408] ssb: Sonics Silicon Backplane found on PCI device 0000:03:02.0 [ 4.684464] 8139cp 0000:03:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 4.684471] 8139cp 0000:03:06.0: Try the "8139too" driver instead. [ 4.703971] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.704056] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 4.727895] scsi0 : pata_atiixp [ 4.741857] 8139too Fast Ethernet driver 0.9.28 [ 4.755662] scsi1 : pata_atiixp [ 4.758744] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14 [ 4.758750] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15 [ 4.920684] ata1.00: ATA-6: ST9808211A, 3.02, max UDMA/100 [ 4.920692] ata1.00: 156301488 sectors, multi 16: LBA48 [ 4.936657] ata1.00: configured for UDMA/100 [ 5.116620] ata2.00: ATAPI: TSSTcorpCDW/DVD TS-L462A, HP17, max MWDMA2 [ 5.148597] ata2.00: configured for MWDMA2 [ 5.148688] isa bounce pool size: 16 pages [ 5.148839] scsi 0:0:0:0: Direct-Access ATA ST9808211A 3.02 PQ: 0 ANSI: 5 [ 5.161526] scsi 1:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462A HP17 PQ: 0 ANSI: 5 [ 5.161946] 8139too 0000:03:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.163420] eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:75:20:fc, IRQ 22 [ 5.163425] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 5.164162] ohci1394 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.214021] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[b0208000-b02087ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 6.488387] ieee1394: Host added: ID:BUS[0-00:1023] GUID[573f020031754179] [ 6.527618] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.527701] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.578782] Driver 'sd' needs updating - please use bus_type methods [ 6.582059] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 6.582100] sd 0:0:0:0: [sda] Write Protect is off [ 6.582105] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.582165] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.582308] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 6.582340] sd 0:0:0:0: [sda] Write Protect is off [ 6.582345] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.582402] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.582411] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 6.661215] sda1 sda2 < sda5 > [ 6.687064] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.740035] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 6.740045] Uniform CD-ROM driver Revision: 3.20 [ 6.740257] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.034949] PM: Starting manual resume from disk [ 7.034957] PM: Resume from partition 8:5 [ 7.034960] PM: Checking hibernation image. [ 7.035189] PM: Resume from disk failed. [ 7.098631] kjournald starting. Commit interval 5 seconds [ 7.098661] EXT3-fs: mounted filesystem with ordered data mode. [ 16.943585] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.098572] nf_conntrack version 0.5.0 (7168 buckets, 28672 max) [ 17.098814] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use [ 17.098819] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 17.098823] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 18.731354] udevd version 124 started [ 19.821423] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.875307] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 20.027334] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 20.038864] ACPI: Power Button (FF) [PWRF] [ 20.039063] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 20.039208] ACPI: Lid Switch [LID] [ 20.039331] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 20.052030] ACPI: Power Button (CM) [PWRB] [ 20.148097] ACPI: WMI: Mapper loaded [ 20.357136] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0 [ 20.901474] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 21.463968] [fglrx] Maximum main memory to use for locked dma buffers: 794 MBytes. [ 21.464046] [fglrx] vendor: 1002 device: 5955 count: 1 [ 21.464933] [fglrx] ioport: bar 1, base 0x9000, size: 0x100 [ 21.464967] pci 0000:01:05.0: power state changed by ACPI to D0 [ 21.464981] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 21.466183] [fglrx] PAT is enabled successfully! [ 21.466252] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors [ 21.501540] ACPI: AC Adapter [ACAD] (on-line) [ 21.776305] ACPI: Battery Slot [BAT1] (battery present) [ 21.886131] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/device:13/input/input5 [ 21.896042] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 23.077072] Yenta: CardBus bridge found at 0000:03:04.0 [103c:3085] [ 23.077103] Yenta: Enabling burst memory read transactions [ 23.077111] Yenta: Using INTVAL to route CSC interrupts to PCI [ 23.077115] Yenta: Routing CardBus interrupts to ISA [ 23.077124] Yenta TI: socket 0000:03:04.0, mfunc 0x00aa1b22, devctl 0x64 [ 23.309399] Yenta: ISA IRQ mask 0x0ef8, PCI irq 20 [ 23.309407] Socket status: 30000006 [ 23.309412] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 23.309421] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 23.309427] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff [ 23.309432] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 23.352400] tifm_7xx1 0000:03:04.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 23.441503] sdhci: Secure Digital Host Controller Interface driver [ 23.441509] sdhci: Copyright(c) Pierre Ossman [ 23.476678] sdhci-pci 0000:03:04.4: SDHCI controller found [104c:8034] (rev 0) [ 23.476712] sdhci-pci 0000:03:04.4: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 23.476892] mmc0: SDHCI controller on PCI [0000:03:04.4] using PIO [ 23.478999] mmc1: SDHCI controller on PCI [0000:03:04.4] using PIO [ 23.479091] mmc2: SDHCI controller on PCI [0000:03:04.4] using PIO [ 23.864176] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 24.036351] b43-phy0: Broadcom 4306 WLAN found [ 24.110088] phy0: Selected rate control algorithm 'pid' [ 24.490017] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ] [ 24.755426] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 24.774050] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x23a0b1, caps: 0xa04713/0x200000 [ 24.777871] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 24.804819] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 24.888174] MC'97 0 converters and GPIO not ready (0x1) [ 28.140635] udev: renamed network interface wlan0 to eth1 [ 28.795216] lp: driver loaded but no devices found [ 29.094910] Broadcom 43xx-legacy driver loaded [ Features: PLRID, Firmware-ID: FW10 ] [ 29.377266] Adding 2626588k swap on /dev/sda5. Priority:-1 extents:1 across:2626588k [ 29.970437] EXT3 FS on sda1, internal journal [ 30.344535] device-mapper: uevent: version 1.0.3 [ 30.347704] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 31.839347] type=1505 audit(1226743450.305:2): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=4175 [ 31.889686] type=1505 audit(1226743450.357:3): operation="profile_load" name="/usr/sbin/clamd" name2="default" pid=4179 [ 32.224625] type=1505 audit(1226743450.693:4): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4183 [ 32.225041] type=1505 audit(1226743450.693:5): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4183 [ 32.458566] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 34.334186] NET: Registered protocol family 10 [ 34.335420] lo: Disabled Privacy Extensions [ 39.039617] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) [ 39.039692] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 [ 39.039697] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 [ 39.039701] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x10 [ 39.039762] Marking TSC unstable due to cpufreq changes [ 39.512035] Clocksource tsc unstable (delta = 469071574 ns) [ 40.089582] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 40.124090] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2 [ 40.300250] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=264 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=244 [ 40.556208] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=264 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=244 [ 40.812252] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=264 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=244 [ 41.012980] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=246 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=226 [ 41.196147] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=144 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=124 [ 41.453227] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=144 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=124 [ 41.708286] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=144 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=124 [ 41.908345] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=233 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=213 [ 42.140308] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=202 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=182 [ 43.004062] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2 [ 43.016345] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=233 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=213 [ 43.935747] ppdev: user-space parallel port driver [ 44.268281] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=246 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=226 [ 44.664020] eth0: no IPv6 routers present [ 45.144332] DROPPED IN= OUT=eth0 SRC=192.168.1.99 DST=224.0.0.251 LEN=233 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=213 [ 50.626371] Bluetooth: Core ver 2.13 [ 50.630750] NET: Registered protocol family 31 [ 50.630761] Bluetooth: HCI device and connection manager initialized [ 50.630767] Bluetooth: HCI socket layer initialized [ 50.671792] Bluetooth: L2CAP ver 2.11 [ 50.671804] Bluetooth: L2CAP socket layer initialized [ 50.703145] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 50.703157] Bluetooth: BNEP filters: protocol multicast [ 50.773908] Bridge firewalling registered [ 50.777892] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 50.813271] Bluetooth: SCO (Voice Link) ver 0.6 [ 50.813282] Bluetooth: SCO socket layer initialized [ 50.829808] Bluetooth: RFCOMM socket layer initialized [ 50.830236] Bluetooth: RFCOMM TTY layer initialized [ 50.830246] Bluetooth: RFCOMM ver 1.10 [ 55.168461] input: b43-phy0 as /devices/virtual/input/input8 [ 55.236070] firmware: requesting b43/ucode5.fw [ 55.337807] firmware: requesting b43/pcm5.fw [ 55.471840] firmware: requesting b43/b0g0initvals5.fw [ 55.488467] firmware: requesting b43/b0g0bsinitvals5.fw [ 55.803410] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 55.955750] Registered led device: b43-phy0::tx [ 55.956893] Registered led device: b43-phy0::rx [ 55.957797] Registered led device: b43-phy0::radio [ 55.996473] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 56.142569] NET: Registered protocol family 17 [ 57.650403] [fglrx] GART Table is not in FRAME_BUFFER range [ 57.657785] [fglrx] CMM init INV FB MC:0x40000000, length:0x8000000 [ 57.657807] [fglrx] Reserved FB block: Shared offset:0, size:40000