[ 0.000000] Linux version 2.6.24-12-rt (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP PREEMPT RT Thu Mar 13 00:49:29 UTC 2008 (Ubuntu 2.6.24-4.6-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004f7d1800 (usable) [ 0.000000] BIOS-e820: 000000004f7d1800 - 0000000050000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 375MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 325585) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 325585 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 325585 [ 0.000000] On node 0 totalpages: 325585 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4040 pages, LIFO batch:0 [ 0.000000] Normal zone: 3080 pages used for memmap [ 0.000000] Normal zone: 222200 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1315 pages used for memmap [ 0.000000] HighMem zone: 94894 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FC9B0 checksum 0 [ 0.000000] ACPI: RSDP 000FC9B0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 4F7D1F90, 0040 (r1 DELL CPi R 27D50203 ASL 61) [ 0.000000] ACPI: FACP 4F7D2C00, 0074 (r1 DELL CPi R 27D50203 ASL 61) [ 0.000000] ACPI: DSDT 4F7D3800, 3520 (r1 INT430 SYSFexxx 1001 MSFT 100000E) [ 0.000000] ACPI: FACS 4F7E2000, 0040 [ 0.000000] ACPI: APIC 4F7D3400, 0068 (r1 DELL CPi R 27D50203 ASL 47) [ 0.000000] ACPI: ASF! 4F7D3000, 005B (r16 DELL CPi R 27D50203 ASL 61) [ 0.000000] ACPI: MCFG 4F7D33C0, 003E (r16 DELL CPi R 27D50203 ASL 61) [ 0.000000] ACPI: SSDT 4F7D23E6, 023E (r1 PmRef Cpu0Ist 3000 INTL 20030522) [ 0.000000] ACPI: SSDT 4F7D220E, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030522) [ 0.000000] ACPI: SSDT 4F7D2013, 01FB (r1 PmRef CpuPm 3000 INTL 20030522) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:90000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 321134 [ 0.000000] Kernel command line: root=UUID=44c3b0b4-b05c-4ae9-ad29-871e1aa89f16 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1596.189 MHz processor. [ 39.221490] Console: colour VGA+ 80x25 [ 39.221494] console [tty0] enabled [ 39.221869] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 39.222348] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 39.288692] Memory: 1270424k/1302340k available (2219k kernel code, 30588k reserved, 1061k data, 368k init, 384836k highmem) [ 39.288702] virtual kernel memory layout: [ 39.288703] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 39.288704] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 39.288706] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 39.288707] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 39.288708] .init : 0xc043b000 - 0xc0497000 ( 368 kB) [ 39.288710] .data : 0xc032ad89 - 0xc0434224 (1061 kB) [ 39.288711] .text : 0xc0100000 - 0xc032ad89 (2219 kB) [ 39.288715] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 39.348836] Calibrating delay using timer specific routine.. 3194.49 BogoMIPS (lpj=1597248) [ 39.348898] Security Framework initialized [ 39.348909] SELinux: Disabled at boot. [ 39.348919] AppArmor: AppArmor initialized [ 39.348924] Failure registering capabilities with primary security module. [ 39.348944] Mount-cache hash table entries: 512 [ 39.349157] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000 [ 39.349172] CPU: L1 I cache: 32K, L1 D cache: 32K [ 39.349175] CPU: L2 cache: 2048K [ 39.349179] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000 [ 39.349191] Compat vDSO mapped to ffffe000. [ 39.349206] Checking 'hlt' instruction... OK. [ 39.353427] SMP alternatives: switching to UP code [ 39.354881] Freeing SMP alternatives: 9k freed [ 39.355012] Early unpacking initramfs... done [ 39.760846] ACPI: Core revision 20070126 [ 39.760917] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 39.765461] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08 [ 39.765489] Total of 1 processors activated (3194.49 BogoMIPS). [ 39.765686] ENABLING IO-APIC IRQs [ 39.765880] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 39.877715] Brought up 1 CPUs [ 39.877744] CPU0 attaching sched-domain: [ 39.877747] domain 0: span 01 [ 39.877749] groups: 01 [ 39.877952] net_namespace: 76 bytes [ 39.877963] Booting paravirtualized kernel on bare hardware [ 39.878504] Time: 1:56:03 Date: 03/24/08 [ 39.878574] NET: Registered protocol family 16 [ 39.878815] EISA bus registered [ 39.878843] ACPI: bus type pci registered [ 39.917272] PCI: PCI BIOS revision 2.10 entry at 0xfb5be, last bus=3 [ 39.917274] PCI: Using configuration type 1 [ 39.917276] Setting up standard PCI resources [ 39.919708] ACPI: EC: Look up EC in DSDT [ 39.932045] ACPI: SSDT 4F7D1FD0, 0043 (r1 LMPWR DELLLOM 1001 INTL 20030522) [ 39.932158] ACPI: Interpreter enabled [ 39.932162] ACPI: (supports S0 S3 S4 S5) [ 39.932176] ACPI: Using IOAPIC for interrupt routing [ 39.954108] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 39.954827] Force enabled HPET at base address 0xfed00000 [ 39.954838] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 39.954843] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 39.955476] PCI: Transparent bridge - 0000:00:1e.0 [ 39.955560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 39.955997] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 39.974166] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 39.974294] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 39.974399] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 39.974503] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11) [ 39.974595] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 39.974692] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 39.974792] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 39.974939] Linux Plug and Play Support v0.97 (c) Adam Belay [ 39.974975] pnp: PnP ACPI init [ 39.974982] ACPI: bus type pnp registered [ 39.989053] pnpacpi: exceeded the max number of mem resources: 12 [ 40.020424] pnpacpi: exceeded the max number of IO resources: 40 [ 40.021400] pnp: PnP ACPI: found 14 devices [ 40.021402] ACPI: ACPI bus type pnp unregistered [ 40.021406] PnPBIOS: Disabled by ACPI PNP [ 40.021676] PCI: Using ACPI for IRQ routing [ 40.021679] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 40.044132] NET: Registered protocol family 8 [ 40.044135] NET: Registered protocol family 20 [ 40.044309] hpet clockevent registered [ 40.044316] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 40.044321] hpet0: 3 64-bit timers, 14318180 Hz [ 40.045378] AppArmor: AppArmor Filesystem Enabled [ 40.056151] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 40.056155] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 40.056158] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 40.056162] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 40.056165] system 00:00: iomem range 0x100000-0x4f7d17ff could not be reserved [ 40.056168] system 00:00: iomem range 0x4f7d1800-0x4f7fffff could not be reserved [ 40.056172] system 00:00: iomem range 0x4f800000-0x4fffffff could not be reserved [ 40.056175] system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved [ 40.056179] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved [ 40.056182] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 40.056185] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 40.056189] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved [ 40.056196] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 40.056199] system 00:02: ioport range 0x1000-0x1005 has been reserved [ 40.056202] system 00:02: ioport range 0x1008-0x100f has been reserved [ 40.056208] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 40.056211] system 00:03: ioport range 0x1006-0x1007 has been reserved [ 40.056214] system 00:03: ioport range 0x100a-0x1059 could not be reserved [ 40.056218] system 00:03: ioport range 0x1060-0x107f has been reserved [ 40.056221] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 40.056224] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 40.056227] system 00:03: ioport range 0x10e0-0x10ff has been reserved [ 40.056234] system 00:08: ioport range 0x900-0x90f has been reserved [ 40.056237] system 00:08: ioport range 0x910-0x91f has been reserved [ 40.056241] system 00:08: ioport range 0x920-0x92f has been reserved [ 40.056244] system 00:08: ioport range 0x93c-0x93f has been reserved [ 40.056247] system 00:08: ioport range 0x940-0x97f has been reserved [ 40.056254] system 00:0c: ioport range 0x930-0x93b has been reserved [ 40.056260] system 00:0d: ioport range 0x7b0-0x7bb has been reserved [ 40.056263] system 00:0d: ioport range 0x7c0-0x7df has been reserved [ 40.056266] system 00:0d: ioport range 0xbb0-0xbbb has been reserved [ 40.056269] system 00:0d: ioport range 0xbc0-0xbdf has been reserved [ 40.056272] system 00:0d: ioport range 0xfb0-0xfbb has been reserved [ 40.056275] system 00:0d: ioport range 0xfc0-0xfdf has been reserved [ 40.056278] system 00:0d: ioport range 0x13b0-0x13bb has been reserved [ 40.056281] system 00:0d: ioport range 0x13c0-0x13df has been reserved [ 40.056284] system 00:0d: ioport range 0x17b0-0x17bb has been reserved [ 40.056287] system 00:0d: ioport range 0x17c0-0x17df has been reserved [ 40.056291] system 00:0d: ioport range 0x1bb0-0x1bbb has been reserved [ 40.056294] system 00:0d: ioport range 0x1bc0-0x1bdf has been reserved [ 40.056297] system 00:0d: ioport range 0x1fb0-0x1fbb has been reserved [ 40.056300] system 00:0d: ioport range 0x1fc0-0x1fdf has been reserved [ 40.056303] system 00:0d: ioport range 0x23b0-0x23bb has been reserved [ 40.056306] system 00:0d: ioport range 0x23c0-0x23df has been reserved [ 40.056309] system 00:0d: ioport range 0x27b0-0x27bb has been reserved [ 40.056312] system 00:0d: ioport range 0x27c0-0x27df has been reserved [ 40.056315] system 00:0d: ioport range 0x2bb0-0x2bbb has been reserved [ 40.056318] system 00:0d: ioport range 0x2bc0-0x2bdf has been reserved [ 40.056321] system 00:0d: ioport range 0x2fb0-0x2fbb has been reserved [ 40.056326] system 00:0d: ioport range 0x2fc0-0x2fdf has been reserved [ 40.056330] system 00:0d: ioport range 0x33b0-0x33bb has been reserved [ 40.056333] system 00:0d: ioport range 0x33c0-0x33df has been reserved [ 40.056336] system 00:0d: ioport range 0x37b0-0x37bb has been reserved [ 40.056339] system 00:0d: ioport range 0x37c0-0x37df has been reserved [ 40.056342] system 00:0d: ioport range 0x3bb0-0x3bbb has been reserved [ 40.056345] system 00:0d: ioport range 0x3bc0-0x3bdf has been reserved [ 40.056348] system 00:0d: ioport range 0x3fb0-0x3fbb has been reserved [ 40.056352] system 00:0d: ioport range 0x3fc0-0x3fdf has been reserved [ 40.056355] system 00:0d: ioport range 0x43b0-0x43bb has been reserved [ 40.056358] system 00:0d: ioport range 0x43c0-0x43df has been reserved [ 40.056361] system 00:0d: ioport range 0x47b0-0x47bb has been reserved [ 40.056364] system 00:0d: ioport range 0x47c0-0x47df has been reserved [ 40.056367] system 00:0d: ioport range 0x4bb0-0x4bbb has been reserved [ 40.056371] system 00:0d: ioport range 0x4bc0-0x4bdf has been reserved [ 40.056374] system 00:0d: ioport range 0x4fb0-0x4fbb has been reserved [ 40.056377] system 00:0d: ioport range 0x4fc0-0x4fdf has been reserved [ 40.056380] system 00:0d: ioport range 0x53b0-0x53bb has been reserved [ 40.056383] system 00:0d: ioport range 0x53c0-0x53df has been reserved [ 40.086839] PCI: Bridge: 0000:00:1c.0 [ 40.086841] IO window: disabled. [ 40.086847] MEM window: dfd00000-dfdfffff [ 40.086854] PREFETCH window: disabled. [ 40.086871] PCI: Bus 3, cardbus bridge: 0000:02:01.0 [ 40.086874] IO window: 00001400-000014ff [ 40.086880] IO window: 00001800-000018ff [ 40.086885] PREFETCH window: 60000000-63ffffff [ 40.086890] MEM window: 64000000-67ffffff [ 40.086895] PCI: Bridge: 0000:00:1e.0 [ 40.086897] IO window: disabled. [ 40.086903] MEM window: dfc00000-dfcfffff [ 40.086907] PREFETCH window: disabled. [ 40.086938] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 40.086945] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 40.086959] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 40.086977] PCI: Enabling device 0000:02:01.0 (0000 -> 0003) [ 40.086982] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 40.087011] NET: Registered protocol family 2 [ 40.122110] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 40.122375] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 40.123399] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) [ 40.126514] TCP: Hash tables configured (established 131072 bind 65536) [ 40.126521] TCP reno registered [ 40.138247] checking if image is initramfs... it is [ 40.927063] Freeing initrd memory: 7658k freed [ 40.927887] audit: initializing netlink socket (disabled) [ 40.927907] audit(1206323763.530:1): initialized [ 40.928076] krcupreemptd setsched 0 [ 40.928078] prio = 98 [ 40.928152] highmem bounce pool size: 64 pages [ 40.928242] VFS: Disk quotas dquot_6.5.1 [ 40.928273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 40.928374] io scheduler noop registered [ 40.928377] io scheduler anticipatory registered [ 40.928379] io scheduler deadline registered [ 40.928393] io scheduler cfq registered (default) [ 40.928407] Boot video device is 0000:00:02.0 [ 40.928666] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 40.928722] assign_interrupt_mode Found MSI capability [ 40.928773] Allocate Port Service[0000:00:1c.0:pcie00] [ 40.928820] Allocate Port Service[0000:00:1c.0:pcie02] [ 40.929126] isapnp: Scanning for PnP cards... [ 41.286445] isapnp: No Plug & Play device found [ 41.318663] Real Time Clock Driver v1.12ac [ 41.318805] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 41.319179] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A [ 41.320268] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 41.320363] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 41.320475] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 41.325636] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 41.325641] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 41.334401] mice: PS/2 mouse device common for all mice [ 41.334533] EISA: Probing bus 0 at eisa.0 [ 41.334544] Cannot allocate resource for EISA slot 1 [ 41.334581] EISA: Detected 0 cards. [ 41.334584] cpuidle: using governor ladder [ 41.334587] cpuidle: using governor menu [ 41.334685] NET: Registered protocol family 1 [ 41.334715] Using IPI No-Shortcut mode [ 41.334762] registered taskstats version 1 [ 41.334897] Magic number: 0:777:913 [ 41.334956] hash matches device ptyz9 [ 41.334967] hash matches device ptywc [ 41.335035] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 41.335037] EDD information not available. [ 41.335237] Freeing unused kernel memory: 368k freed [ 41.338502] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 42.590963] fuse init (API version 7.9) [ 42.603012] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 42.603019] ACPI: Processor [CPU0] (supports 8 throttling states) [ 42.603033] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 42.606914] ACPI: Thermal Zone [THM] (53 C) [ 43.302028] usbcore: registered new interface driver usbfs [ 43.302053] usbcore: registered new interface driver hub [ 43.313987] usbcore: registered new device driver usb [ 43.328976] USB Universal Host Controller Interface driver v3.0 [ 43.329035] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.329052] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 43.329057] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 43.329429] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 43.341977] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80 [ 43.342127] usb usb1: configuration #1 chosen from 1 choice [ 43.342152] hub 1-0:1.0: USB hub found [ 43.342159] hub 1-0:1.0: 2 ports detected [ 43.443016] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 43.443033] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 43.443038] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 43.443062] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 43.450053] SCSI subsystem initialized [ 43.462669] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60 [ 43.462806] usb usb2: configuration #1 chosen from 1 choice [ 43.462832] hub 2-0:1.0: USB hub found [ 43.462839] hub 2-0:1.0: 2 ports detected [ 43.513832] libata version 3.00 loaded. [ 43.562951] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 43.562968] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 43.562972] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 43.562996] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 43.570075] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40 [ 43.570199] usb usb3: configuration #1 chosen from 1 choice [ 43.570225] hub 3-0:1.0: USB hub found [ 43.570232] hub 3-0:1.0: 2 ports detected [ 43.670848] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 43.670865] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 43.670869] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 43.670894] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 43.686726] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20 [ 43.686867] usb usb4: configuration #1 chosen from 1 choice [ 43.686893] hub 4-0:1.0: USB hub found [ 43.686900] hub 4-0:1.0: 2 ports detected [ 43.768662] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 43.787849] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.787867] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 43.787871] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 43.787895] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 43.791811] ehci_hcd 0000:00:1d.7: debug port 1 [ 43.791818] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 43.791827] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800 [ 43.879599] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 43.879737] usb usb5: configuration #1 chosen from 1 choice [ 43.879763] hub 5-0:1.0: USB hub found [ 43.879771] hub 5-0:1.0: 8 ports detected [ 43.981606] tg3.c:v3.86 (November 9, 2007) [ 43.981641] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.981654] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 43.981752] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 43.981792] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 43.981804] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 43.991703] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:12:3f:21:23:9e [ 43.991711] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 43.991714] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 43.992026] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 43.995549] ssb: SPROM revision 1 detected. [ 44.003561] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0 [ 44.010277] ata_piix 0000:00:1f.1: version 2.12 [ 44.010294] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 44.010330] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 44.012219] scsi0 : ata_piix [ 44.012827] scsi1 : ata_piix [ 44.013004] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 44.013008] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 44.167313] ata1.00: ATA-6: HTS548080M9AT00, MG4OA5EA, max UDMA/100 [ 44.167318] ata1.00: 156301488 sectors, multi 8: LBA48 [ 44.174227] ata1.00: configured for UDMA/100 [ 44.174276] ata2: port disabled. ignoring. [ 44.174433] scsi 0:0:0:0: Direct-Access ATA HTS548080M9AT00 MG4O PQ: 0 ANSI: 5 [ 44.216142] Driver 'sd' needs updating - please use bus_type methods [ 44.216238] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 44.216252] sd 0:0:0:0: [sda] Write Protect is off [ 44.216255] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 44.216273] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.216322] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 44.216333] sd 0:0:0:0: [sda] Write Protect is off [ 44.216336] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 44.216363] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.216367] sda: sda1 sda2 sda3 [ 44.238494] sd 0:0:0:0: [sda] Attached SCSI disk [ 44.244401] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 44.281318] usb 2-2: device not accepting address 2, error -71 [ 44.339480] Attempting manual resume [ 44.339484] swsusp: Resume From Partition 8:2 [ 44.339486] PM: Checking swsusp image. [ 44.339632] PM: Resume from disk failed. [ 44.356453] EXT3-fs: mounted filesystem with ordered data mode. [ 44.356495] kjournald starting. Commit interval 5 seconds [ 44.541138] Clocksource tsc unstable (delta = -2314005575 ns) [ 44.568427] usb 2-2: new full speed USB device using uhci_hcd and address 4 [ 44.576387] usb 2-2: configuration #1 chosen from 1 choice [ 44.587159] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 44.598137] usb 3-1: configuration #1 chosen from 1 choice [ 47.596850] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 47.655426] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 47.732285] intel_rng: FWH not detected [ 47.766263] Linux agpgart interface v0.102 [ 47.889239] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 48.007132] agpgart: Detected an Intel 915GM Chipset. [ 48.007661] agpgart: Detected 7932K stolen memory. [ 48.035349] agpgart: AGP aperture is 256M @ 0xc0000000 [ 48.095358] iTCO_vendor_support: vendor-support=0 [ 48.099400] input: PS/2 Mouse as /devices/virtual/input/input3 [ 48.132242] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4 [ 48.164978] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 48.165058] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 48.165091] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 48.507164] ACPI: AC Adapter [AC] (on-line) [ 49.019565] Yenta: CardBus bridge found at 0000:02:01.0 [1028:018f] [ 49.019591] Yenta: Using CSCINT to route CSC interrupts to PCI [ 49.019594] Yenta: Routing CardBus interrupts to PCI [ 49.019600] Yenta TI: socket 0000:02:01.0, mfunc 0x01111122, devctl 0x64 [ 49.096257] ACPI: Battery Slot [BAT0] (battery present) [ 49.096338] input: Lid Switch as /devices/virtual/input/input5 [ 49.096856] ACPI: Lid Switch [LID] [ 49.096902] input: Power Button (CM) as /devices/virtual/input/input6 [ 49.108269] ACPI: Power Button (CM) [PBTN] [ 49.108334] ACPI: Battery Slot [BAT1] (battery absent) [ 49.108393] input: Sleep Button (CM) as /devices/virtual/input/input7 [ 49.120261] ACPI: Sleep Button (CM) [SBTN] [ 49.247989] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 [ 49.247995] Socket status: 30000006 [ 49.247998] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 49.248004] pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff [ 49.537687] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input8 [ 49.546948] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 49.547093] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 49.558946] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 50.935038] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.935071] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 51.162832] b43-phy0: Broadcom 4306 WLAN found [ 51.186970] phy0: Selected rate control algorithm 'simple' [ 51.230944] irda_init() [ 51.230965] NET: Registered protocol family 23 [ 51.259975] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 51.754351] intel8x0_measure_ac97_clock: measured 50471 usecs [ 51.754356] intel8x0: clocking to 48000 [ 52.021511] usbcore: registered new interface driver hiddev [ 52.034595] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input10 [ 52.056192] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.2-1 [ 52.056213] usbcore: registered new interface driver usbhid [ 52.056216] /build/buildd/linux-2.6.24/debian/build/custom-source-rt/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 53.420500] cs: IO port probe 0x100-0x3af: excluding 0x300-0x307 [ 53.422295] cs: IO port probe 0x3e0-0x4ff: clean. [ 53.423046] cs: IO port probe 0x820-0x8ff: clean. [ 53.423686] cs: IO port probe 0xc00-0xcf7: clean. [ 53.424507] cs: IO port probe 0xa00-0xaff: clean. [ 53.633025] lp: driver loaded but no devices found [ 53.830602] Adding 1550264k swap on /dev/sda2. Priority:-1 extents:1 across:1550264k [ 53.926726] EXT3 FS on sda1, internal journal [ 53.998574] device-mapper: uevent: version 1.0.3 [ 53.998607] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 54.210660] kjournald starting. Commit interval 5 seconds [ 54.210911] EXT3 FS on sda3, internal journal [ 54.210916] EXT3-fs: mounted filesystem with ordered data mode. [ 54.594529] ip_tables: (C) 2000-2006 Netfilter Core Team [ 55.465729] ACPI: ACPI Dock Station Driver [ 57.050988] ppdev: user-space parallel port driver [ 57.374741] audit(1206323791.515:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=4938 profile="/usr/sbin/cupsd" namespace="default" [ 59.236247] apm: BIOS not found. [ 59.244461] [drm] Initialized drm 1.1.0 20060810 [ 59.286392] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 59.286402] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 59.286476] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 122.235511] Marking TSC unstable due to: cpufreq changes. [ 62.039837] input: b43-phy0 as /devices/virtual/input/input11 [ 62.064671] Bluetooth: Core ver 2.11 [ 62.074178] NET: Registered protocol family 31 [ 62.074182] Bluetooth: HCI device and connection manager initialized [ 62.074186] Bluetooth: HCI socket layer initialized [ 62.142925] Bluetooth: L2CAP ver 2.9 [ 62.142930] Bluetooth: L2CAP socket layer initialized [ 74.646516] Bluetooth: RFCOMM socket layer initialized [ 74.646531] Bluetooth: RFCOMM TTY layer initialized [ 74.646534] Bluetooth: RFCOMM ver 1.8 [ 63.841783] Registered led device: b43-phy0:tx [ 63.841806] Registered led device: b43-phy0:rx [ 63.841825] Registered led device: b43-phy0:radio [ 74.434519] NET: Registered protocol family 10 [ 74.435344] lo: Disabled Privacy Extensions [ 74.436247] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 74.437257] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 319.430847] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 319.430853] tg3: eth0: Flow control is on for TX and on for RX. [ 319.431586] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 329.974706] eth0: no IPv6 routers present [ 377.916690] NET: Registered protocol family 17