[ 0.000000] Linux version 2.6.24-2-generic (buildd@rothera) (gcc version 4.2.3 20071210 (prerelease) (Ubuntu 4.2.2-4ubuntu2)) #1 SMP Thu Dec 20 17:36:12 GMT 2007 (Ubuntu 2.6.24-2.4-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037e70000 (usable) [ 0.000000] BIOS-e820: 0000000037e70000 - 0000000037e82000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037e82000 - 0000000037e84000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037e84000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 894MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f83b0 [ 0.000000] Entering add_active_range(0, 0, 228976) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 228976 [ 0.000000] HighMem 228976 -> 228976 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 228976 [ 0.000000] On node 0 totalpages: 228976 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1756 pages used for memmap [ 0.000000] Normal zone: 223124 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F82F0 checksum 0 [ 0.000000] ACPI: RSDP 000F82F0, 0024 (r2 TOSINV) [ 0.000000] ACPI: XSDT 37E7A581, 0054 (r1 TOSINV TOSINV00 6040000 INV 0) [ 0.000000] ACPI: FACP 37E81A4A, 00F4 (r3 ATI Herring 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 37E7A5D5, 7475 (r1 TOSINV SB600 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 37E83FC0, 0040 [ 0.000000] ACPI: SSDT 37E81BB2, 0210 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 37E81DC2, 0054 (r1 TOSINV APIC 6040000 INV 0) [ 0.000000] ACPI: SLIC 37E81E16, 0176 (r1 TOSINV TOSINV00 6040000 INV 0) [ 0.000000] ACPI: MCFG 37E81F8C, 003C (r1 TOSINV MCFG 6040000 INV 0) [ 0.000000] ACPI: HPET 37E81FC8, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227188 [ 0.000000] Kernel command line: root=UUID=fc5cb7c6-3a34-43ed-b4c0-2702073fc9dc ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1895.501 MHz processor. [ 20.316630] Console: colour VGA+ 80x25 [ 20.316633] console [tty0] enabled [ 20.316923] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 20.317278] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 20.330559] Memory: 896340k/915904k available (2118k kernel code, 18944k reserved, 985k data, 364k init, 0k highmem) [ 20.330567] virtual kernel memory layout: [ 20.330568] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 20.330569] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 20.330571] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 20.330572] lowmem : 0xc0000000 - 0xf7e70000 ( 894 MB) [ 20.330573] .init : 0xc040d000 - 0xc0468000 ( 364 kB) [ 20.330574] .data : 0xc031182d - 0xc0407d64 ( 985 kB) [ 20.330575] .text : 0xc0100000 - 0xc031182d (2118 kB) [ 20.330578] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 20.330608] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 20.330741] hpet clockevent registered [ 20.410864] Calibrating delay using timer specific routine.. 3867.98 BogoMIPS (lpj=7735968) [ 20.410883] Security Framework initialized [ 20.410888] SELinux: Disabled at boot. [ 20.410891] Capability LSM initialized [ 20.410903] Mount-cache hash table entries: 512 [ 20.410998] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 20.411007] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 20.411009] CPU: L2 Cache: 512K (64 bytes/line) [ 20.411012] CPU 0(2) -> Core 0 [ 20.411014] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 20.411022] Compat vDSO mapped to ffffe000. [ 20.411030] Checking 'hlt' instruction... OK. [ 20.427085] SMP alternatives: switching to UP code [ 20.428168] Early unpacking initramfs... done [ 20.737309] ACPI: Core revision 20070126 [ 20.737376] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.362281] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02 [ 21.362298] SMP alternatives: switching to SMP code [ 21.362713] Booting processor 1/1 eip 3000 [ 21.373164] Initializing CPU#1 [ 21.450490] Calibrating delay using timer specific routine.. 3790.95 BogoMIPS (lpj=7581906) [ 21.450497] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 21.450503] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 21.450505] CPU: L2 Cache: 512K (64 bytes/line) [ 21.450507] CPU 1(2) -> Core 1 [ 21.450509] AMD C1E detected late. Force timer broadcast. [ 21.450510] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 21.450468] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02 [ 21.450486] Total of 2 processors activated (7658.93 BogoMIPS). [ 21.450630] ENABLING IO-APIC IRQs [ 21.450803] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 21.491284] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 21.491327] ...trying to set up timer (IRQ0) through the 8259A ... failed. [ 21.491329] ...trying to set up timer as Virtual Wire IRQ... works. [ 21.531912] Brought up 2 CPUs [ 21.531936] CPU0 attaching sched-domain: [ 21.531939] domain 0: span 03 [ 21.531941] groups: 01 02 [ 21.531943] CPU1 attaching sched-domain: [ 21.531945] domain 0: span 03 [ 21.531947] groups: 02 01 [ 21.532126] net_namespace: 64 bytes [ 21.532132] Booting paravirtualized kernel on bare hardware [ 21.532583] Time: 11:42:39 Date: 01/01/08 [ 21.532629] NET: Registered protocol family 16 [ 21.532801] EISA bus registered [ 21.532805] ACPI: bus type pci registered [ 21.533177] PCI: PCI BIOS revision 3.00 entry at 0xfdde8, last bus=25 [ 21.533179] PCI: Using configuration type 1 [ 21.533181] Setting up standard PCI resources [ 21.534785] ACPI: EC: Look up EC in DSDT [ 21.539841] ACPI: System BIOS is requesting _OSI(Linux) [ 21.539844] ACPI: If "acpi_osi=Linux" works better, [ 21.539845] Please send dmidecode to linux-acpi@vger.kernel.org [ 21.543579] ACPI: Interpreter enabled [ 21.543582] ACPI: (supports S0 S3 S4 S5) [ 21.543594] ACPI: Using IOAPIC for interrupt routing [ 21.551055] ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62 [ 21.551058] ACPI: EC: driver started in poll mode [ 21.697537] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 21.699143] PCI: Transparent bridge - 0000:00:14.4 [ 21.699183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 21.699353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 21.699464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 21.699573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 21.699684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT] [ 21.699800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT] [ 21.699928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 21.700022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 21.703513] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 21.703636] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 21.703758] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 21.703875] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 21.703991] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 21.704107] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 21.704223] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 21.704338] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 21.704464] ACPI: Power Resource [PFA1] (off) [ 21.704505] Linux Plug and Play Support v0.97 (c) Adam Belay [ 21.704534] pnp: PnP ACPI init [ 21.704541] ACPI: bus type pnp registered [ 21.707800] pnpacpi: exceeded the max number of IO resources: 24 [ 21.707847] pnpacpi: exceeded the max number of IO resources: 24 [ 21.707887] pnpacpi: exceeded the max number of IO resources: 24 [ 21.710534] pnp: PnP ACPI: found 11 devices [ 21.710536] ACPI: ACPI bus type pnp unregistered [ 21.710539] PnPBIOS: Disabled by ACPI PNP [ 21.710708] PCI: Using ACPI for IRQ routing [ 21.710711] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 21.710717] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0 [ 21.710761] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0 [ 21.710803] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0 [ 21.710843] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0 [ 21.799704] NET: Registered protocol family 8 [ 21.799707] NET: Registered protocol family 20 [ 21.799738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 21.799743] hpet0: 4 32-bit timers, 14318180 Hz [ 21.803697] Time: hpet clocksource has been installed. [ 21.803702] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. [ 21.803960] Could not switch to high resolution mode on CPU 1 [ 21.803714] lapic is not functional. [ 21.803716] Could not switch to high resolution mode on CPU 0 [ 21.815723] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 21.815726] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 21.815735] system 00:08: ioport range 0x1080-0x1080 has been reserved [ 21.815738] system 00:08: ioport range 0x220-0x22f has been reserved [ 21.815740] system 00:08: ioport range 0x40b-0x40b has been reserved [ 21.815743] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 21.815746] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 21.815749] system 00:08: ioport range 0x530-0x537 has been reserved [ 21.815751] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 21.815754] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 21.815757] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 21.815761] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 21.815764] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 21.815766] system 00:08: ioport range 0xcd0-0xcd1 has been reserved [ 21.815769] system 00:08: ioport range 0xcd2-0xcd3 has been reserved [ 21.815772] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 21.815775] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 21.815777] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 21.815780] system 00:08: ioport range 0xfe00-0xfe00 has been reserved [ 21.815786] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 21.815789] system 00:09: iomem range 0xff800000-0xff80ffff has been reserved [ 21.815792] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 21.815795] system 00:09: iomem range 0x0-0x0 could not be reserved [ 21.846190] PCI: Bridge: 0000:00:01.0 [ 21.846192] IO window: 9000-9fff [ 21.846195] MEM window: f8000000-f81fffff [ 21.846198] PREFETCH window: f0000000-f7ffffff [ 21.846201] PCI: Bridge: 0000:00:04.0 [ 21.846202] IO window: disabled. [ 21.846205] MEM window: disabled. [ 21.846207] PREFETCH window: disabled. [ 21.846211] PCI: Bridge: 0000:00:05.0 [ 21.846213] IO window: a000-afff [ 21.846216] MEM window: f8200000-f82fffff [ 21.846218] PREFETCH window: disabled. [ 21.846220] PCI: Bridge: 0000:00:06.0 [ 21.846222] IO window: disabled. [ 21.846224] MEM window: disabled. [ 21.846226] PREFETCH window: disabled. [ 21.846229] PCI: Bridge: 0000:00:14.4 [ 21.846231] IO window: disabled. [ 21.846239] MEM window: f8300000-f83fffff [ 21.846243] PREFETCH window: disabled. [ 21.846263] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 21.846270] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 21.846277] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 21.846292] NET: Registered protocol family 2 [ 21.895729] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 21.895996] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 21.896660] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 21.896967] TCP: Hash tables configured (established 131072 bind 65536) [ 21.896970] TCP reno registered [ 21.911775] checking if image is initramfs... it is [ 22.494240] Freeing initrd memory: 6889k freed [ 22.495258] audit: initializing netlink socket (disabled) [ 22.495271] audit(1199187759.784:1): initialized [ 22.497162] VFS: Disk quotas dquot_6.5.1 [ 22.497233] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 22.497358] AppArmor: Unable to register AppArmor [ 22.497418] io scheduler noop registered [ 22.497420] io scheduler anticipatory registered [ 22.497422] io scheduler deadline registered [ 22.497431] io scheduler cfq registered (default) [ 22.497506] Boot video device is 0000:01:05.0 [ 22.497616] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 22.497637] assign_interrupt_mode Found MSI capability [ 22.497658] Allocate Port Service[0000:00:04.0:pcie00] [ 22.497692] Allocate Port Service[0000:00:04.0:pcie02] [ 22.497748] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 22.497767] assign_interrupt_mode Found MSI capability [ 22.497785] Allocate Port Service[0000:00:05.0:pcie00] [ 22.497841] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 22.497860] assign_interrupt_mode Found MSI capability [ 22.497878] Allocate Port Service[0000:00:06.0:pcie00] [ 22.497912] Allocate Port Service[0000:00:06.0:pcie02] [ 22.498061] isapnp: Scanning for PnP cards... [ 22.706889] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 22.882148] isapnp: No Plug & Play device found [ 22.910529] Real Time Clock Driver v1.12ac [ 22.910781] hpet_resources: 0xfed00000 is busy [ 22.910802] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.911971] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.912037] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 22.912130] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 22.915371] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.915376] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.931516] mice: PS/2 mouse device common for all mice [ 22.931631] EISA: Probing bus 0 at eisa.0 [ 22.931639] Cannot allocate resource for EISA slot 1 [ 22.931665] Cannot allocate resource for EISA slot 8 [ 22.931667] EISA: Detected 0 cards. [ 22.931669] cpuidle: using governor ladder [ 22.931671] cpuidle: using governor menu [ 22.931748] TCP cubic registered [ 22.931755] NET: Registered protocol family 1 [ 22.931777] Using IPI No-Shortcut mode [ 22.931911] Magic number: 8:890:730 [ 22.932276] Freeing unused kernel memory: 364k freed [ 22.951273] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 24.191062] fuse init (API version 7.9) [ 24.199349] ACPI: Fan [FAN1] (off) [ 24.206888] ACPI: Processor [CPU0] (supports 8 throttling states) [ 24.220976] ACPI: Thermal Zone [TZCR] (57 C) [ 24.582854] r8169 Gigabit Ethernet driver 2.2LK loaded [ 24.582880] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 24.582898] PCI: Setting latency timer of device 0000:08:00.0 to 64 [ 24.583175] eth0: RTL8101e at 0xf8856000, 00:a0:d1:8c:61:c6, XID 34200000 IRQ 220 [ 24.642976] SCSI subsystem initialized [ 24.692336] usbcore: registered new interface driver usbfs [ 24.692361] usbcore: registered new interface driver hub [ 24.716543] usbcore: registered new device driver usb [ 24.764449] libata version 3.00 loaded. [ 24.779183] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 17 [ 24.779199] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 24.779456] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 24.779498] ehci_hcd 0000:00:13.5: debug port 1 [ 24.779515] ehci_hcd 0000:00:13.5: irq 17, io mem 0xf8609400 [ 24.782907] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 24.790688] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.790818] usb usb1: configuration #1 chosen from 1 choice [ 24.790842] hub 1-0:1.0: USB hub found [ 24.790849] hub 1-0:1.0: 10 ports detected [ 24.894827] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 24.894839] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 24.894863] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 24.894880] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf8604000 [ 24.950725] usb usb2: configuration #1 chosen from 1 choice [ 24.950747] hub 2-0:1.0: USB hub found [ 24.950755] hub 2-0:1.0: 2 ports detected [ 25.054631] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 16 [ 25.054642] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 25.054668] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 25.054683] ohci_hcd 0000:00:13.1: irq 16, io mem 0xf8605000 [ 25.110637] usb usb3: configuration #1 chosen from 1 choice [ 25.110659] hub 3-0:1.0: USB hub found [ 25.110669] hub 3-0:1.0: 2 ports detected [ 25.134534] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 25.214587] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 25.214603] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 25.214625] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 25.214642] ohci_hcd 0000:00:13.2: irq 19, io mem 0xf8606000 [ 25.267325] usb 1-2: configuration #1 chosen from 1 choice [ 25.270574] usb usb4: configuration #1 chosen from 1 choice [ 25.270594] hub 4-0:1.0: USB hub found [ 25.270602] hub 4-0:1.0: 2 ports detected [ 25.374469] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 16 [ 25.374478] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 25.374497] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 25.374509] ohci_hcd 0000:00:13.3: irq 16, io mem 0xf8607000 [ 25.430485] usb usb5: configuration #1 chosen from 1 choice [ 25.430503] hub 5-0:1.0: USB hub found [ 25.430513] hub 5-0:1.0: 2 ports detected [ 25.506362] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 25.534400] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 19 [ 25.534408] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 25.534426] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 25.534437] ohci_hcd 0000:00:13.4: irq 19, io mem 0xf8608000 [ 25.590416] usb usb6: configuration #1 chosen from 1 choice [ 25.590439] hub 6-0:1.0: USB hub found [ 25.590453] hub 6-0:1.0: 2 ports detected [ 25.645955] usb 1-6: configuration #1 chosen from 1 choice [ 25.694497] ahci 0000:00:12.0: version 3.0 [ 25.694526] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 20 [ 25.694545] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 25.694547] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [ 26.697948] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 26.697953] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [ 26.698326] scsi0 : ahci [ 26.698585] scsi1 : ahci [ 26.698716] scsi2 : ahci [ 26.698847] scsi3 : ahci [ 26.698926] ata1: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609100 irq 20 [ 26.698930] ata2: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609180 irq 20 [ 26.698934] ata3: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609200 irq 20 [ 26.698938] ata4: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609280 irq 20 [ 27.173716] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 27.174209] ata1.00: ATA-8: FUJITSU MHY2160BH, 0040020B, max UDMA/100 [ 27.174212] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 27.174808] ata1.00: configured for UDMA/100 [ 27.485591] ata2: SATA link down (SStatus 0 SControl 300) [ 27.797470] ata3: SATA link down (SStatus 0 SControl 300) [ 28.109351] ata4: SATA link down (SStatus 0 SControl 300) [ 28.109453] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2160B 0040 PQ: 0 ANSI: 5 [ 28.110314] ACPI: PCI Interrupt 0000:14:06.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 28.161035] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[f8300000-f83007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 28.167355] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18 [ 28.167395] PCI: Setting latency timer of device 0000:00:14.1 to 64 [ 28.167408] ACPI: PCI interrupt for device 0000:00:14.1 disabled [ 28.172551] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 28.172556] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 28.173726] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1 [ 28.173738] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18 [ 28.173747] SB600_PATA: not 100% native mode: will probe irqs later [ 28.173766] ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio [ 28.173777] Probing IDE interface ide0... [ 28.201486] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 28.201499] sd 0:0:0:0: [sda] Write Protect is off [ 28.201501] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.201517] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.201563] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 28.201572] sd 0:0:0:0: [sda] Write Protect is off [ 28.201574] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.201589] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.201592] sda: sda1 sda2 sda3 sda4 [ 28.298608] sd 0:0:0:0: [sda] Attached SCSI disk [ 28.303519] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 28.734214] Attempting manual resume [ 28.734218] swsusp: Resume From Partition 8:3 [ 28.734220] PM: Checking swsusp image. [ 28.734415] PM: Resume from disk failed. [ 28.793870] kjournald starting. Commit interval 5 seconds [ 28.794306] EXT3-fs: mounted filesystem with ordered data mode. [ 29.432838] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d18c61c6] [ 29.581031] hda: TSSTcorp CDDVDW TS-L632H, ATAPI CD/DVD-ROM drive [ 29.581051] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 29.581392] hda: UDMA 2 mode selected [ 29.581887] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 35.239474] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 35.307412] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 35.350216] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.432599] Linux agpgart interface v0.102 [ 35.502100] input: Power Button (FF) as /devices/virtual/input/input3 [ 35.565927] ACPI: Power Button (FF) [PWRF] [ 35.565989] input: Power Button (CM) as /devices/virtual/input/input4 [ 35.578038] ricoh-mmc: Ricoh MMC Controller disabling driver [ 35.578042] ricoh-mmc: Copyright(c) Philip Langdale [ 35.578094] ricoh-mmc: Ricoh MMC controller found at 0000:14:06.2 [1180:0843] (rev 12) [ 35.578107] ricoh-mmc: Controller is now disabled. [ 35.605970] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 35.637914] ACPI: Power Button (CM) [PWRB] [ 35.638004] input: Lid Switch as /devices/virtual/input/input5 [ 35.675393] ACPI: Lid Switch [LID] [ 35.688721] ACPI: Battery Slot [BAT0] (battery present) [ 35.689576] ACPI: AC Adapter [ADP0] (on-line) [ 35.888218] sdhci: Secure Digital Host Controller Interface driver [ 35.888222] sdhci: Copyright(c) Pierre Ossman [ 35.888269] sdhci: SDHCI controller found at 0000:14:06.1 [1180:0822] (rev 22) [ 35.888295] ACPI: PCI Interrupt 0000:14:06.1[B] -> GSI 21 (level, low) -> IRQ 22 [ 35.888315] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 35.888365] mmc0: SDHCI at 0xf8300800 irq 22 DMA [ 36.134072] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input6 [ 36.151921] r8169: eth0: link down [ 36.193821] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 36.490942] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000 [ 36.490949] synaptics: Toshiba Satellite A215 detected, limiting rate to 40pps. [ 36.514638] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 36.514646] Uniform CD-ROM driver Revision: 3.20 [ 36.525438] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 36.545654] ieee80211_crypt: registered algorithm 'NULL' [ 36.591163] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 36.591166] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 36.847047] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 36.910544] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18 [ 36.985341] zd1211rw 1-2:1.0: eth1 [ 36.985363] usbcore: registered new interface driver zd1211rw [ 37.788986] NET: Registered protocol family 17 [ 37.804967] si3054: cannot initialize. EXT MID = 0000 [ 38.298301] lp: driver loaded but no devices found [ 38.460093] Adding 14643236k swap on /dev/sda3. Priority:-1 extents:1 across:14643236k [ 38.988912] EXT3 FS on sda4, internal journal [ 41.113391] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 41.171691] No dock devices found. [ 42.608983] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 processors (2 cpu cores) (version 2.20.00) [ 42.608842] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x12 [ 42.608846] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13 [ 42.608849] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 [ 42.608851] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 44.112233] NET: Registered protocol family 10 [ 44.112446] lo: Disabled Privacy Extensions [ 44.112809] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.845443] ppdev: user-space parallel port driver [ 65.150768] Clocksource tsc unstable (delta = -78983602 ns) [ 67.725204] hda-intel: Invalid position buffer, using LPIB read method instead. [ 122.016468] usb 1-2: Could not load firmware file zd1211/zd1211b_ub. Error number -2 [ 122.016476] zd1211rw 1-2:1.0: couldn't load firmware. Error number -2 [ 123.710627] usb 1-2: Could not load firmware file zd1211/zd1211b_ub. Error number -2 [ 123.710635] zd1211rw 1-2:1.0: couldn't load firmware. Error number -2 [ 130.887319] usb 1-2: Could not load firmware file zd1211/zd1211b_ub. Error number -2 [ 130.887326] zd1211rw 1-2:1.0: couldn't load firmware. Error number -2 [ 132.583834] usb 1-2: Could not load firmware file zd1211/zd1211b_ub. Error number -2 [ 132.583841] zd1211rw 1-2:1.0: couldn't load firmware. Error number -2 [ 145.920943] usb 1-2: Could not load firmware file zd1211/zd1211b_ub. Error number -2 [ 145.920949] zd1211rw 1-2:1.0: couldn't load firmware. Error number -2