U-Boot 2012.04.01 (Apr 25 2012 - 15:17:57) CPU : OMAP4430 ES2.2 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt ** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 3 U-Boot SPL 2012.04.01 (Apr 25 2012 - 15:17:57) OMAP4430 ES2.2 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2012.04.01 (Apr 25 2012 - 15:17:57) CPU : OMAP4430 ES2.2 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt ** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 425 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 reading uImage 5011376 bytes read reading uInitrd 3885682 bytes read ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5011312 Bytes = 4.8 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 3885618 Bytes = 3.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.1-38-linaro-lt-omap (buildd@mizar) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38~lt~ci~00000000000001+1336186099~4fa4ad78-Ubuntu SMP PRE) [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] cma: CMA: reserved 32 MiB at a6800000 [ 0.000000] omap_rproc_reserve_cma: DMA contiguos memory Ducati [ 0.000000] cma: CMA: reserved 104 MiB at a9800000 [ 0.000000] omap_rproc_reserve_cma: DMA contiguos memory Tesla [ 0.000000] cma: CMA: reserved 8 MiB at a8800000 [ 0.000000] cma: CMA: reserved 16 MiB at be800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4430 ES2.2 [ 0.000000] PERCPU: Embedded 8 pages/cpu @81472000 s11648 r8192 d12928 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840 [ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=f25312c0-e2c5-47b1-b009-b5e5092d5a35 rootwait ro earlyprintk fixrtc nocompcache vram=48M omapfb.M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 1023MB = 1023MB total [ 0.000000] Memory: 855756k/855756k available, 192820k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB) [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80008000 - 0x809dbee0 (10064 kB) [ 0.000000] .init : 0x809dc000 - 0x80a48d80 ( 436 kB) [ 0.000000] .data : 0x80a4a000 - 0x80abccb8 ( 460 kB) [ 0.000000] .bss : 0x80abccdc - 0x80c6aa6c (1720 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:538 nr_irqs:538 538 [ 0.000000] Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] twd: can't register interrupt 29 (-16) [ 0.015136] Calibrating delay loop... 1590.23 BogoMIPS (lpj=6213632) [ 0.051788] pid_max: default: 32768 minimum: 301 [ 0.057037] Security Framework initialized [ 0.061401] AppArmor: AppArmor initialized [ 0.065795] Yama: becoming mindful. [ 0.069854] Mount-cache hash table entries: 512 [ 0.076019] Initializing cgroup subsys cpuacct [ 0.080780] Initializing cgroup subsys memory [ 0.085449] Initializing cgroup subsys devices [ 0.090179] Initializing cgroup subsys freezer [ 0.094879] Initializing cgroup subsys net_cls [ 0.099609] Initializing cgroup subsys blkio [ 0.104187] Initializing cgroup subsys perf_event [ 0.109313] CPU: Testing write buffer coherency: ok [ 0.114593] ftrace: allocating 29035 entries in 86 pages [ 0.201110] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.207122] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.215728] Setting up static identity map for 0x806b0ae8 - 0x806b0b40 [ 0.222625] L310 cache controller enabled [ 0.226837] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.235595] generating sar_ram layout... [ 0.239959] sar ram layout created [ 0.330566] CPU1: Booted secondary processor [ 0.400360] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.400390] CPU1: Unknown IPI message 0x1 [ 0.415985] Brought up 2 CPUs [ 0.419128] SMP: Total of 2 processors activated (3188.82 BogoMIPS). [ 0.426696] devtmpfs: initialized [ 0.435668] omap_hwmod: fdif: no clkdm_name [ 0.440093] omap_hwmod: fdif: cannot _init_clocks [ 0.445068] omap_hwmod: sl2if: no clkdm_name [ 0.449554] omap_hwmod: sl2if: cannot _init_clocks [ 0.454895] omap_sr_disable: omap_sr struct for sr_core not found [ 0.461303] omap_sr_disable: omap_sr struct for sr_core not found [ 0.467681] omap_sr_disable: omap_sr struct for sr_core not found [ 0.474060] omap_sr_disable: omap_sr struct for sr_core not found [ 0.480468] omap_sr_disable: omap_sr struct for sr_core not found [ 0.486846] omap_sr_disable: omap_sr struct for sr_core not found [ 0.493225] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.499511] omap_sr_disable: omap_sr struct for sr_core not found [ 0.505889] omap_sr_disable: omap_sr struct for sr_core not found [ 0.514953] omap_hwmod: aess: _wait_target_disable failed [ 0.520599] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.526916] omap_sr_disable: omap_sr struct for sr_core not found [ 0.533294] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.539611] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.546813] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.553222] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.559539] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.565826] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.574798] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.581085] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.586547] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.592864] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.599182] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.605468] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.612945] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.620727] print_constraints: dummy: [ 0.637084] NET: Registered protocol family 16 [ 0.642089] Trying to unpack rootfs image as initramfs... [ 0.669250] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.959899] Freeing initrd memory: 3792K [ 0.964569] GPMC revision 6.0 [ 0.971710] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.978271] OMAP GPIO hardware version 0.1 [ 0.982971] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.989929] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.996856] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 1.003875] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 1.010986] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 1.020355] omap_mux_init: Add partition: #1: core, flags: 2 [ 1.027282] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 1.036224] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [ 1.043518] omap_hwmod_mux_init: Could not allocate device mux entry [ 1.057067] omap_mux_get_by_name: Could not find signal auxclk1_ck [ 1.063537] camera: initializing... [ 1.067718] cma: CMA: reserved 32 MiB at bc800000 [ 1.072723] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.081085] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.097991] OMAP DMA hardware revision 0.0 [ 1.103027] emif emif.1: Device configured with addr = fd100000 and IRQ142 [ 1.110412] emif emif.2: Device configured with addr = fd200000 and IRQ143 [ 1.146911] bio: create slab at 0 [ 1.152832] print_constraints: VIO-V1V8: 1800 mV [ 1.158111] print_constraints: VDD-V2V1: 2100 mV [ 1.163421] print_constraints: vwl1271: 1800 mV [ 1.174163] SCSI subsystem initialized [ 1.180938] usbcore: registered new interface driver usbfs [ 1.187042] usbcore: registered new interface driver hub [ 1.192840] usbcore: registered new device driver usb [ 1.199462] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 1.207000] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.216156] twl6030: PIH (irq 39) chaining IRQs 602..621 [ 1.222595] print_constraints: VUSB: 3300 mV normal standby [ 1.431915] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 1.439483] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 1.448028] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 1.456634] print_constraints: VCXIO: 1800 mV normal standby [ 1.463104] print_constraints: VDAC: 1800 mV normal standby [ 1.469635] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 1.478759] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 1.488006] print_constraints: CLK32KG: [ 1.492645] print_constraints: VANA: 2100 mV normal standby [ 1.498992] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 1.505126] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz [ 1.511505] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 1.519104] omap-iommu omap-iommu.0: ducati registered [ 1.524566] omap-iommu omap-iommu.1: tesla registered [ 1.530395] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 1.538146] NetLabel: Initializing [ 1.541748] NetLabel: domain hash size = 128 [ 1.546325] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.551574] NetLabel: unlabeled traffic allowed by default [ 1.558166] Switching to clocksource 32k_counter [ 1.583709] FS-Cache: Loaded [ 1.587036] AppArmor: AppArmor Filesystem Enabled [ 1.644897] NET: Registered protocol family 2 [ 1.650024] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.658905] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.668670] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 1.676696] TCP: Hash tables configured (established 131072 bind 65536) [ 1.683746] TCP reno registered [ 1.687072] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.693389] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.700622] NET: Registered protocol family 1 [ 1.706024] RPC: Registered named UNIX socket transport module. [ 1.712432] RPC: Registered udp transport module. [ 1.717346] RPC: Registered tcp transport module. [ 1.722412] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.729339] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2 [ 1.737030] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.766479] platform aess: omap_dvfs_register_device: unable to find voltdm aess! [ 1.774414] platform aess: omap_init_opp_table:aess:err dvfs register -22 7 [ 1.781677] platform aess: omap_dvfs_register_device: unable to find voltdm aess! [ 1.789611] platform aess: omap_init_opp_table:aess:err dvfs register -22 8 [ 1.799682] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.806152] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.812499] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.818939] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.828094] audit: initializing netlink socket (disabled) [ 1.833892] type=2000 audit(1.796:1): initialized [ 1.953369] VFS: Disk quotas dquot_6.5.2 [ 1.957916] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.967407] FS-Cache: Netfs 'nfs' registered for caching [ 1.973907] fuse init (API version 7.18) [ 1.979980] Btrfs loaded [ 1.982696] msgmni has been set to 1998 [ 1.989013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.996948] io scheduler noop registered [ 2.001190] io scheduler deadline registered [ 2.005798] io scheduler cfq registered (default) [ 2.012023] OMAP DSS rev 4.0 [ 2.033294] _regulator_get: omapdss_hdmi supply vdds_hdmi not found, using dummy regulator [ 2.053680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.064575] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 2.073303] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 2.081970] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.089660] console [ttyO2] enabled, bootconsole disabled [ 2.089660] console [ttyO2] enabled, bootconsole disabled [ 2.102142] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 2.112091] [drm] Initialized drm 1.1.0 20060810 [ 2.139617] brd: module loaded [ 2.154113] loop: module loaded [ 2.157653] (stk) :sysfs entries created [ 2.161804] (stk) : debugfs entries created [ 2.189788] Fixed MDIO Bus: probed [ 2.193572] tun: Universal TUN/TAP device driver, 1.6 [ 2.199035] tun: (C) 1999-2004 Max Krasnyansky [ 2.206939] PPP generic driver version 2.4.2 [ 2.212829] usbcore: registered new interface driver smsc95xx [ 2.220123] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.227294] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator [ 2.235900] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.242584] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 2.251861] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 2.266601] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.272857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.280120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.287841] usb usb1: Product: OMAP-EHCI Host Controller [ 2.293548] usb usb1: Manufacturer: Linux 3.3.1-38-linaro-lt-omap ehci_hcd [ 2.300903] usb usb1: SerialNumber: ehci-omap.0 [ 2.307189] hub 1-0:1.0: USB hub found [ 2.311157] hub 1-0:1.0: 3 ports detected [ 2.345336] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.352020] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 2.359527] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 2.368774] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800 [ 2.451171] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.458465] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.466186] usb usb2: Product: OMAP3 OHCI Host Controller [ 2.471984] usb usb2: Manufacturer: Linux 3.3.1-38-linaro-lt-omap ohci_hcd [ 2.479339] usb usb2: SerialNumber: ohci-omap3.0 [ 2.486450] hub 2-0:1.0: USB hub found [ 2.490417] hub 2-0:1.0: 3 ports detected [ 2.498260] Initializing USB Mass Storage driver... [ 2.504180] usbcore: registered new interface driver usb-storage [ 2.510620] USB Mass Storage support registered. [ 2.515716] usbcore: registered new interface driver libusual [ 2.641662] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 4.321411] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 4.328491] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.338012] hub 1-1:1.0: USB hub found [ 4.342529] hub 1-1:1.0: 5 ports detected [ 4.424560] usbcore: registered new interface driver usbtest [ 4.431243] mousedev: PS/2 mouse device common for all mice [ 4.439331] twl_rtc twl_rtc: Power up reset detected. [ 4.445800] twl_rtc twl_rtc: Enabling TWL-RTC. [ 4.452636] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 4.459594] i2c /dev entries driver [ 4.464752] Linux media interface: v0.10 [ 4.469055] Linux video capture interface: v2.00 [ 4.474670] iss_probe: [ 4.477172] _regulator_get: omap4iss supply vcamphy not found, using dummy regulator [ 4.485565] iss_probe: enabled phy regulator [ 4.490051] _regulator_get: omap4iss supply vcam not found, using dummy regulator [ 4.498199] iss_probe: enabled regulator [ 4.502593] omap4iss omap4iss: Revision 40000101 found [ 4.517547] ov5640 3-003c: Failed reading register 0x302a! [ 4.523345] ov5640 3-003c: Failure to detect OV5640 chip [ 4.529541] omap4iss omap4iss: iss_register_subdev_group: Unable to register subdev ov5640 [ 4.546020] ov5650 3-0036: Failed reading register 0x300a! [ 4.552032] ov5650 3-0036: Failure to read Chip ID (high byte) [ 4.558563] omap4iss omap4iss: iss_register_subdev_group: Unable to register subdev ov5650 [ 4.568084] iss_probe: completed OK [ 4.572998] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 4.580291] device-mapper: uevent: version 1.0.3 [ 4.585601] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 4.594635] cpuidle: using governor ladder [ 4.598968] cpuidle: using governor menu [ 4.605621] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator [ 4.616668] _regulator_get: omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator [ 4.700775] thermal_governor_dev_register:Adding omap_ondie_governor governor [ 4.708465] thermal_get_slope:Getting slope is not supported for domain cpu [ 4.715942] thermal_get_offset:Getting offset is not supported for domain cpu [ 4.723663] thermal_governor_dev_register:Adding omap_ongpu_governor governor [ 4.731414] thermal_get_slope:Getting slope is not supported for domain gpu [ 4.738891] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 4.738922] thermal_get_offset:Getting offset is not supported for domain gpu [ 4.757568] OMAP4/5 SoC init [ 4.761596] aess aess: ABE Firmware version 9530 [ 4.768798] omap_sr_disable: omap_sr struct for sr_iva not found [ 4.775329] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.785888] mmc0: new high speed SDHC card at address b368 [ 4.792602] mmcblk0: mmc0:b368 USD 7.46 GiB [ 4.799072] mmcblk0: p1 p2 [ 4.804595] omap_sr_disable: omap_sr struct for sr_iva not found [ 4.825042] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok [ 4.832672] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok [ 4.842529] asoc: snd-soc-dummy-dai <-> Voice mapping ok [ 4.849945] asoc: snd-soc-dummy-dai <-> Tones mapping ok [ 4.857574] asoc: snd-soc-dummy-dai <-> Vibra mapping ok [ 4.863677] asoc: snd-soc-dummy-dai <-> MODEM mapping ok [ 4.869873] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 4.877441] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok [ 4.884033] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.892150] asoc: snd-soc-dummy-dai <-> omap-mcbsp-dai.1 mapping ok [ 4.902465] smsc95xx v1.0.4 [ 4.902954] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok [ 4.903228] twl6040-codec twl6040-codec: dapm: unknown pin Vinrator [ 4.903259] twl6040-codec twl6040-codec: dapm: unknown pin Ext Mic [ 4.903289] twl6040-codec twl6040-codec: dapm: unknown pin Ext Spk [ 4.903289] twl6040-codec twl6040-codec: dapm: unknown pin Headset Mic [ 4.903320] twl6040-codec twl6040-codec: dapm: unknown pin Headset Stereophone [ 4.903320] twl6040-codec twl6040-codec: dapm: unknown pin Digital Mic 0 [ 4.903350] twl6040-codec twl6040-codec: dapm: unknown pin Digital Mic 1 [ 4.903350] twl6040-codec twl6040-codec: dapm: unknown pin Digital Mic 2 [ 4.903442] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok [ 4.903808] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok [ 4.904083] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok [ 4.904327] asoc: twl6040-vib <-> mcpdm-vib mapping ok [ 4.904602] asoc: snd-soc-dummy-dai <-> omap-mcbsp-dai.0 mapping ok [ 4.904846] asoc: snd-soc-dummy-dai <-> omap-mcbsp-dai.0 mapping ok [ 4.905120] asoc: snd-soc-dummy-dai <-> omap-mcbsp-dai.1 mapping ok [ 5.015045] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 5.026458] Error: Driver 'hdmi-audio-dai' is already registered, aborting... [ 5.036529] asoc: omap4-hdmi-audio-codec <-> hdmi-audio-dai mapping ok [ 5.045013] ALSA device list: [ 5.048309] #0: PandaBoard [ 5.051361] #1: OMAP4HDMI [ 5.054504] u32 classifier [ 5.057617] Actions configured [ 5.062683] TCP cubic registered [ 5.067840] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 5.074035] NET: Registered protocol family 10 [ 5.080322] mmc1: new SDIO card at address 0001 [ 5.089019] NET: Registered protocol family 17 [ 5.095336] lib80211: common routines for IEEE802.11 drivers [ 5.101776] Registering the dns_resolver key type [ 5.106964] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 5.115325] ThumbEE CPU extension supported. [ 5.120056] Registering SWP/SWPB emulation handler [ 5.131866] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 2a:40:8e:cc:3b:0a [ 5.148803] omap_sr_disable: omap_sr struct for sr_mpu not found [ 5.155303] omap_sr_disable: omap_sr struct for sr_core not found [ 5.162109] Power Management for TI OMAP4XX/OMAP5XXX devices. [ 5.168365] hwmod gpmc not found [ 5.171936] sr_init: No PMIC hook to init smartreflex [ 5.177459] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 5.186004] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 5.194366] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 5.203094] SmartReflex Class3 initialized [ 5.211822] clock: disabling unused clocks to save power [ 5.221435] registered taskstats version 1 [ 5.240203] usb 1-1.2: new low-speed USB device number 4 using ehci-omap [ 5.256774] regulator_init_complete: VANA: incomplete constraints, leaving on [ 5.266784] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 5.275878] regulator_init_complete: VUSB: incomplete constraints, leaving on [ 5.284698] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 5.299133] dmm dmm: initialized all PAT entries [ 5.377532] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=0024 [ 5.384887] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.392730] usb 1-1.2: Product: HP Basic USB Keyboard [ 5.395111] usb 1-1.2: Manufacturer: CHICONY [ 5.486022] usb 1-1.3: new low-speed USB device number 5 using ehci-omap [ 5.617767] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c06a [ 5.625122] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.632965] usb 1-1.3: Product: USB Optical Mouse [ 5.638061] usb 1-1.3: Manufacturer: Logitech [ 6.313537] Initial hdmi_get_current_hpd says connected [ 6.319702] hdmi_check_hpd_state says 1 [ 7.344787] Initial hdmi_get_current_hpd says connected [ 7.350860] hdmi_check_hpd_state says 1 [ 8.391632] Initial hdmi_get_current_hpd says connected [ 8.397705] hdmi_check_hpd_state says 1 [ 8.477996] [drm] Enabling DMM ywrap scrolling [ 9.493194] Initial hdmi_get_current_hpd says connected [ 9.493774] hdmi_check_hpd_state says 1 [ 9.538543] Console: switching to colour frame buffer device 240x67 [ 9.580963] fb0: omapdrm frame buffer device [ 9.580993] drm: registered panic notifier [ 9.590057] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.597290] [drm] No driver support for vblank timestamp query. [ 9.603759] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 9.610870] Freeing init memory: 432K Loading, please wait... [ 9.692077] udevd[894]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 10.076751] input: CHICONY HP Basic USB Keyboard as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.0/input/inpu0 [ 10.094116] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-ehci-omap.0-1.2/input0 [ 10.116729] input: Logitech USB Optical Mouse as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input1 [ 10.133697] generic-usb 0003:046D:C06A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-ehci-omap.0-1.3/input0 [ 10.142913] usbcore: registered new interface driver usbhid [ 10.154479] usbhid: USB HID core driver done. [ 10.504730] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. fsck from util-linux 2.20.1 rootfs: Superblock last write time is in the future. (by less than a day, probably due to the hardware clock being incorrectly set). FIXED. rootfs: clean, 179098/486720 files, 536591/1944320 blocks Waiting for network configuration... Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned [ 136.527435] omapdss error: operation stopped when reading edid [ 136.561401] omapdss error: operation stopped when reading edid [ 137.767669] hdmi_check_hpd_state says 1 [ 138.829437] hdmi_check_hpd_state says 1 Welcome to Linaro 12.04 (GNU/Linux 3.3.1-38-linaro-lt-omap armv7l) * Documentation: https://wiki.linaro.org/ 0 packages can be updated. 0 updates are security updates. root@linaro-ubuntu-desktop:~# [ 157.034271] omapdss error: operation stopped when reading edid [ 158.587005] hdmi_check_hpd_state says 1 [ 181.411712] omapdss error: operation stopped when reading edid root@linaro-ubuntu-desktop:~# root@linaro-ubuntu-desktop:~# root@linaro-ubuntu-desktop:~# root@linaro-ubuntu-desktop:~# hciconfig root@linaro-ubuntu-desktop:~# hcitool scan Device is not available: No such device root@linaro-ubuntu-desktop:~# dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.1-38-linaro-lt-omap (buildd@mizar) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38~lt~ci~00000000000001+1336186099~4fa4ad78-Ubuntu SMP PRE) [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] cma: dma_declare_contiguous(size 2000000, base 00000000, limit a8800000) [ 0.000000] cma: CMA: reserved 32 MiB at a6800000 [ 0.000000] omap_rproc_reserve_cma: DMA contiguos memory Ducati [ 0.000000] cma: dma_declare_contiguous(size 6500000, base a9800000, limit 00000000) [ 0.000000] cma: CMA: reserved 104 MiB at a9800000 [ 0.000000] omap_rproc_reserve_cma: DMA contiguos memory Tesla [ 0.000000] cma: dma_declare_contiguous(size 700000, base a8800000, limit 00000000) [ 0.000000] cma: CMA: reserved 8 MiB at a8800000 [ 0.000000] cma: dma_contiguous_reserve(limit c0000000) [ 0.000000] cma: dma_contiguous_reserve: total available: 1023 MiB, size absolute: 16 MiB, size percentage: 0 MiB [ 0.000000] cma: dma_contiguous_reserve: reserving 16 MiB for global area [ 0.000000] cma: dma_declare_contiguous(size 1000000, base 00000000, limit c0000000) [ 0.000000] cma: CMA: reserved 16 MiB at be800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 261888 [ 0.000000] free_area_init_node: node 0, pgdat 80ab9180, node_mem_map 80c6b000 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 259840 pages, LIFO batch:31 [ 0.000000] OMAP4430 ES2.2 [ 0.000000] PERCPU: Embedded 8 pages/cpu @81472000 s11648 r8192 d12928 u32768 [ 0.000000] pcpu-alloc: s11648 r8192 d12928 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840 [ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=f25312c0-e2c5-47b1-b009-b5e5092d5a35 rootwait ro earlyprintk fixrtc nocompcache vram=48M omapfb.M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 1023MB = 1023MB total [ 0.000000] Memory: 855756k/855756k available, 192820k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB) [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80008000 - 0x809dbee0 (10064 kB) [ 0.000000] .init : 0x809dc000 - 0x80a48d80 ( 436 kB) [ 0.000000] .data : 0x80a4a000 - 0x80abccb8 ( 460 kB) [ 0.000000] .bss : 0x80abccdc - 0x80c6aa6c (1720 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:538 nr_irqs:538 538 [ 0.000000] Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] twd: can't register interrupt 29 (-16) [ 0.015136] Calibrating delay loop... 1590.23 BogoMIPS (lpj=6213632) [ 0.051788] pid_max: default: 32768 minimum: 301 [ 0.057037] Security Framework initialized [ 0.061401] AppArmor: AppArmor initialized [ 0.065795] Yama: becoming mindful. [ 0.069854] Mount-cache hash table entries: 512 [ 0.076019] Initializing cgroup subsys cpuacct [ 0.080780] Initializing cgroup subsys memory [ 0.085449] Initializing cgroup subsys devices [ 0.090179] Initializing cgroup subsys freezer [ 0.094879] Initializing cgroup subsys net_cls [ 0.099609] Initializing cgroup subsys blkio [ 0.104187] Initializing cgroup subsys perf_event [ 0.109313] CPU: Testing write buffer coherency: ok [ 0.114593] ftrace: allocating 29035 entries in 86 pages [ 0.201110] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.207122] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.215728] Setting up static identity map for 0x806b0ae8 - 0x806b0b40 [ 0.222625] L310 cache controller enabled [ 0.226837] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.235595] generating sar_ram layout... [ 0.239959] sar ram layout created [ 0.330566] CPU1: Booted secondary processor [ 0.400360] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.400390] CPU1: Unknown IPI message 0x1 [ 0.415985] Brought up 2 CPUs [ 0.419128] SMP: Total of 2 processors activated (3188.82 BogoMIPS). [ 0.426696] devtmpfs: initialized [ 0.435668] omap_hwmod: fdif: no clkdm_name [ 0.440093] omap_hwmod: fdif: cannot _init_clocks [ 0.445068] omap_hwmod: sl2if: no clkdm_name [ 0.449554] omap_hwmod: sl2if: cannot _init_clocks [ 0.454895] omap_sr_disable: omap_sr struct for sr_core not found [ 0.461303] omap_sr_disable: omap_sr struct for sr_core not found [ 0.467681] omap_sr_disable: omap_sr struct for sr_core not found [ 0.474060] omap_sr_disable: omap_sr struct for sr_core not found [ 0.480468] omap_sr_disable: omap_sr struct for sr_core not found [ 0.486846] omap_sr_disable: omap_sr struct for sr_core not found [ 0.493225] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.499511] omap_sr_disable: omap_sr struct for sr_core not found [ 0.505889] omap_sr_disable: omap_sr struct for sr_core not found [ 0.514953] omap_hwmod: aess: _wait_target_disable failed [ 0.520599] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.526916] omap_sr_disable: omap_sr struct for sr_core not found [ 0.533294] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.539611] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.546813] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.553222] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.559539] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.565826] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.574798] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.581085] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.586547] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.592864] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.599182] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.605468] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.612945] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.620727] print_constraints: dummy: [ 0.624877] cma: cma_init_reserved_areas() [ 0.624877] cma: cma_create_area(base 000a6800, count 2000) [ 0.627166] cma: cma_create_area: returned bf932b40 [ 0.627197] cma: cma_create_area(base 000a9800, count 6800) [ 0.634857] cma: cma_create_area: returned bf932a80 [ 0.634887] cma: cma_create_area(base 000a8800, count 800) [ 0.635498] cma: cma_create_area: returned bf932a40 [ 0.635528] cma: cma_create_area(base 000be800, count 1000) [ 0.636718] cma: cma_create_area: returned bf932a00 [ 0.637084] NET: Registered protocol family 16 [ 0.642089] Trying to unpack rootfs image as initramfs... [ 0.650390] cma: dma_alloc_from_contiguous(cma bf932a00, count 64, align 6) [ 0.668365] cma: dma_alloc_from_contiguous(): returned 8143b000 [ 0.669250] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.959899] Freeing initrd memory: 3792K [ 0.964569] GPMC revision 6.0 [ 0.971710] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.978271] OMAP GPIO hardware version 0.1 [ 0.982971] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.989929] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.996856] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 1.003875] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 1.010986] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 1.020355] omap_mux_init: Add partition: #1: core, flags: 2 [ 1.027282] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 1.036224] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [ 1.043518] omap_hwmod_mux_init: Could not allocate device mux entry [ 1.057067] omap_mux_get_by_name: Could not find signal auxclk1_ck [ 1.063537] camera: initializing... [ 1.067687] cma: dma_declare_contiguous(size 2000000, base 00000000, limit 00000000) [ 1.067718] cma: CMA: reserved 32 MiB at bc800000 [ 1.072723] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.081085] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.097991] OMAP DMA hardware revision 0.0 [ 1.103027] emif emif.1: Device configured with addr = fd100000 and IRQ142 [ 1.110412] emif emif.2: Device configured with addr = fd200000 and IRQ143 [ 1.146911] bio: create slab at 0 [ 1.152832] print_constraints: VIO-V1V8: 1800 mV [ 1.158111] print_constraints: VDD-V2V1: 2100 mV [ 1.163421] print_constraints: vwl1271: 1800 mV [ 1.174163] SCSI subsystem initialized [ 1.180938] usbcore: registered new interface driver usbfs [ 1.187042] usbcore: registered new interface driver hub [ 1.192840] usbcore: registered new device driver usb [ 1.199462] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 1.207000] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.216156] twl6030: PIH (irq 39) chaining IRQs 602..621 [ 1.222595] print_constraints: VUSB: 3300 mV normal standby [ 1.431915] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 1.439483] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 1.448028] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 1.456634] print_constraints: VCXIO: 1800 mV normal standby [ 1.463104] print_constraints: VDAC: 1800 mV normal standby [ 1.469635] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 1.478759] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 1.488006] print_constraints: CLK32KG: [ 1.492645] print_constraints: VANA: 2100 mV normal standby [ 1.498992] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 1.505126] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz [ 1.511505] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 1.519104] omap-iommu omap-iommu.0: ducati registered [ 1.524566] omap-iommu omap-iommu.1: tesla registered [ 1.530395] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 1.538146] NetLabel: Initializing [ 1.541748] NetLabel: domain hash size = 128 [ 1.546325] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.551574] NetLabel: unlabeled traffic allowed by default [ 1.558166] Switching to clocksource 32k_counter [ 1.583709] FS-Cache: Loaded [ 1.587036] AppArmor: AppArmor Filesystem Enabled [ 1.644897] NET: Registered protocol family 2 [ 1.650024] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.658905] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.668670] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 1.676696] TCP: Hash tables configured (established 131072 bind 65536) [ 1.683746] TCP reno registered [ 1.687072] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.693389] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.700622] NET: Registered protocol family 1 [ 1.706024] RPC: Registered named UNIX socket transport module. [ 1.712432] RPC: Registered udp transport module. [ 1.717346] RPC: Registered tcp transport module. [ 1.722412] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.729339] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2 [ 1.737030] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.766479] platform aess: omap_dvfs_register_device: unable to find voltdm aess! [ 1.774414] platform aess: omap_init_opp_table:aess:err dvfs register -22 7 [ 1.781677] platform aess: omap_dvfs_register_device: unable to find voltdm aess! [ 1.789611] platform aess: omap_init_opp_table:aess:err dvfs register -22 8 [ 1.799682] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.806152] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.812499] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.818939] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.828094] audit: initializing netlink socket (disabled) [ 1.833892] type=2000 audit(1.796:1): initialized [ 1.953369] VFS: Disk quotas dquot_6.5.2 [ 1.957916] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.967407] FS-Cache: Netfs 'nfs' registered for caching [ 1.973907] fuse init (API version 7.18) [ 1.979980] Btrfs loaded [ 1.982696] msgmni has been set to 1998 [ 1.989013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.996948] io scheduler noop registered [ 2.001190] io scheduler deadline registered [ 2.005798] io scheduler cfq registered (default) [ 2.012023] OMAP DSS rev 4.0 [ 2.033294] _regulator_get: omapdss_hdmi supply vdds_hdmi not found, using dummy regulator [ 2.043487] pio_a_i2c_init called [ 2.053680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.064575] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 2.073303] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 2.081970] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.089660] console [ttyO2] enabled, bootconsole disabled [ 2.102142] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 2.112091] [drm] Initialized drm 1.1.0 20060810 [ 2.139617] brd: module loaded [ 2.154113] loop: module loaded [ 2.157653] (stk) :sysfs entries created [ 2.161804] (stk) : debugfs entries created [ 2.189788] Fixed MDIO Bus: probed [ 2.193572] tun: Universal TUN/TAP device driver, 1.6 [ 2.199035] tun: (C) 1999-2004 Max Krasnyansky [ 2.206939] PPP generic driver version 2.4.2 [ 2.212829] usbcore: registered new interface driver smsc95xx [ 2.220123] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.226989] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 [ 2.227294] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator [ 2.235839] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3 [ 2.235870] ehci-omap ehci-omap.0: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM [ 2.235900] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.235900] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.242584] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 2.250518] cma: dma_alloc_from_contiguous(cma bf932a00, count 1, align 0) [ 2.251739] cma: dma_alloc_from_contiguous(): returned 8143b800 [ 2.251800] ehci-omap ehci-omap.0: park 0 [ 2.251800] ehci-omap ehci-omap.0: support lpm [ 2.251861] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 2.257934] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 2.266601] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.272796] usb usb1: default language 0x0409 [ 2.272827] usb usb1: udev 1, busnum 1, minor = 0 [ 2.272857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.280120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.287841] usb usb1: Product: OMAP-EHCI Host Controller [ 2.293548] usb usb1: Manufacturer: Linux 3.3.1-38-linaro-lt-omap ehci_hcd [ 2.300903] usb usb1: SerialNumber: ehci-omap.0 [ 2.306610] usb usb1: usb_probe_device [ 2.306640] usb usb1: configuration #1 chosen from 1 choice [ 2.306671] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.307159] hub 1-0:1.0: usb_probe_interface [ 2.307189] hub 1-0:1.0: usb_probe_interface - got id [ 2.307189] hub 1-0:1.0: USB hub found [ 2.311157] hub 1-0:1.0: 3 ports detected [ 2.315521] hub 1-0:1.0: standalone hub [ 2.315521] hub 1-0:1.0: individual port power switching [ 2.315551] hub 1-0:1.0: individual port over-current protection [ 2.315551] hub 1-0:1.0: power on to power good time: 20ms [ 2.315582] hub 1-0:1.0: local power source is good [ 2.315612] hub 1-0:1.0: enabling power on all ports [ 2.317016] ehci-omap ehci-omap.0: ...powerup ports... [ 2.345336] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.351837] ohci_hcd: block sizes: ed 64 td 64 [ 2.352020] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 2.359527] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 2.367614] ohci-omap3 ohci-omap3.0: starting OHCI controller [ 2.367645] cma: dma_alloc_from_contiguous(cma bf932a00, count 1, align 0) [ 2.368652] cma: dma_alloc_from_contiguous(): returned 8143b820 [ 2.368743] ohci-omap3 ohci-omap3.0: created debug files [ 2.368774] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800 [ 2.415100] ehci-omap ehci-omap.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.415100] hub 1-0:1.0: port 1: status 0501 change 0001 [ 2.450866] ohci-omap3 ohci-omap3.0: OHCI controller state [ 2.450897] ohci-omap3 ohci-omap3.0: OHCI 1.0, NO legacy support registers, rh state running [ 2.450897] ohci-omap3 ohci-omap3.0: control 0x283 RWC HCFS=operational CBSR=3 [ 2.450927] ohci-omap3 ohci-omap3.0: cmdstatus 0x00000 SOC=0 [ 2.450927] ohci-omap3 ohci-omap3.0: intrstatus 0x00000004 SF [ 2.450958] ohci-omap3 ohci-omap3.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 2.450988] ohci-omap3 ohci-omap3.0: hcca frame #0015 [ 2.450988] ohci-omap3 ohci-omap3.0: roothub.a 0a000203 POTPGT=10 NPS NDP=3(3) [ 2.451019] ohci-omap3 ohci-omap3.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 2.451019] ohci-omap3 ohci-omap3.0: roothub.status 00008000 DRWE [ 2.451049] ohci-omap3 ohci-omap3.0: roothub.portstatus [0] 0x00000100 PPS [ 2.451049] ohci-omap3 ohci-omap3.0: roothub.portstatus [1] 0x00000100 PPS [ 2.451080] ohci-omap3 ohci-omap3.0: roothub.portstatus [2] 0x00000100 PPS [ 2.451141] usb usb2: default language 0x0409 [ 2.451171] usb usb2: udev 1, busnum 2, minor = 128 [ 2.451171] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.458465] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.466186] usb usb2: Product: OMAP3 OHCI Host Controller [ 2.471984] usb usb2: Manufacturer: Linux 3.3.1-38-linaro-lt-omap ohci_hcd [ 2.479339] usb usb2: SerialNumber: ohci-omap3.0 [ 2.485656] usb usb2: usb_probe_device [ 2.485687] usb usb2: configuration #1 chosen from 1 choice [ 2.485717] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.486419] hub 2-0:1.0: usb_probe_interface [ 2.486450] hub 2-0:1.0: usb_probe_interface - got id [ 2.486450] hub 2-0:1.0: USB hub found [ 2.490417] hub 2-0:1.0: 3 ports detected [ 2.494781] hub 2-0:1.0: standalone hub [ 2.494781] hub 2-0:1.0: no power switching (usb 1.0) [ 2.494812] hub 2-0:1.0: global over-current protection [ 2.494812] hub 2-0:1.0: power on to power good time: 20ms [ 2.494842] hub 2-0:1.0: local power source is good [ 2.494873] hub 2-0:1.0: no over-current condition exists [ 2.494873] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.498260] Initializing USB Mass Storage driver... [ 2.504180] usbcore: registered new interface driver usb-storage [ 2.510620] USB Mass Storage support registered. [ 2.515716] usbcore: registered new interface driver libusual [ 2.521942] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000 [ 2.521972] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 2.579284] ehci-omap ehci-omap.0: port 1 high speed [ 2.579315] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.641662] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.704284] ehci-omap ehci-omap.0: port 1 high speed [ 2.704315] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 4.321411] usb 1-1: udev 2, busnum 1, minor = 1 [ 4.321411] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 4.328491] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.336547] usb 1-1: usb_probe_device [ 4.336547] usb 1-1: configuration #1 chosen from 1 choice [ 4.337280] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 4.337982] hub 1-1:1.0: usb_probe_interface [ 4.338012] hub 1-1:1.0: usb_probe_interface - got id [ 4.338012] hub 1-1:1.0: USB hub found [ 4.342529] hub 1-1:1.0: 5 ports detected [ 4.346893] hub 1-1:1.0: compound device; port removable status: FRRRR [ 4.346923] hub 1-1:1.0: individual port power switching [ 4.346923] hub 1-1:1.0: individual port over-current protection [ 4.347167] hub 1-1:1.0: TT per port [ 4.347167] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 4.347198] hub 1-1:1.0: power on to power good time: 100ms [ 4.360626] hub 1-1:1.0: local power source is good [ 4.360656] hub 1-1:1.0: enabling power on all ports [ 4.424499] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 4.424560] usbcore: registered new interface driver usbtest [ 4.431243] mousedev: PS/2 mouse device common for all mice [ 4.439331] twl_rtc twl_rtc: Power up reset detected. [ 4.445800] twl_rtc twl_rtc: Enabling TWL-RTC. [ 4.452636] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 4.459594] i2c /dev entries driver [ 4.464752] Linux media interface: v0.10 [ 4.469055] Linux video capture interface: v2.00 [ 4.474670] iss_probe: [ 4.477172] _regulator_get: omap4iss supply vcamphy not found, using dummy regulator [ 4.485565] iss_probe: enabled phy regulator [ 4.490051] _regulator_get: omap4iss supply vcam not found, using dummy regulator [ 4.498199] iss_probe: enabled regulator [ 4.502593] omap4iss omap4iss: Revision 40000101 found [ 4.517547] ov5640 3-003c: Failed reading register 0x302a! [ 4.523345] ov5640 3-003c: Failure to detect OV5640 chip [ 4.529357] hub 1-1:1.0: port 1: status 0101 change 0001 [ 4.529541] omap4iss omap4iss: iss_register_subdev_group: Unable to register subdev ov5640 [ 4.538391] hub 1-1:1.0: port 2: status 0301 change 0001 [ 4.538726] hub 1-1:1.0: port 3: status 0301 change 0001 [ 4.546020] ov5650 3-0036: Failed reading register 0x300a! [ 4.552032] ov5650 3-0036: Failure to read Chip ID (high byte) [ 4.558563] omap4iss omap4iss: iss_register_subdev_group: Unable to register subdev ov5650 [ 4.568084] iss_probe: completed OK [ 4.572998] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 4.580291] device-mapper: uevent: version 1.0.3 [ 4.585601] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 4.594635] cpuidle: using governor ladder [ 4.598968] cpuidle: using governor menu [ 4.605621] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator [ 4.616668] _regulator_get: omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator [ 4.633666] usb 1-1: link qh256-0001/bd9f9bc0 start 1 [1/0 us] [ 4.633728] hub 1-1:1.0: state 7 ports 5 chg 000e evt 0000 [ 4.634094] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 4.699401] Registered led device: pandaboard::status1 [ 4.699676] Registered led device: pandaboard::status2 [ 4.700775] thermal_governor_dev_register:Adding omap_ondie_governor governor [ 4.708465] thermal_get_slope:Getting slope is not supported for domain cpu [ 4.715942] thermal_get_offset:Getting offset is not supported for domain cpu [ 4.723663] thermal_governor_dev_register:Adding omap_ongpu_governor governor [ 4.731414] thermal_get_slope:Getting slope is not supported for domain gpu [ 4.738891] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 4.738922] thermal_get_offset:Getting offset is not supported for domain gpu [ 4.757568] OMAP4/5 SoC init [ 4.761596] aess aess: ABE Firmware version 9530 [ 4.768798] omap_sr_disable: omap_sr struct for sr_iva not found [ 4.775329] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.785888] mmc0: new high speed SDHC card at address b368 [ 4.792602] mmcblk0: mmc0:b368 USD 7.46 GiB [ 4.799072] mmcblk0: p1 p2 [ 4.804595] omap_sr_disable: omap_sr struct for sr_iva not found [ 4.822448] cma: dma_alloc_from_contiguous(cma bf932a00, count 32, align 5) [ 4.823455] cma: dma_alloc_from_contiguous(): returned 8143bc00 [ 4.823944] cma: dma_alloc_from_contiguous(cma bf932a00, count 32, align 5) [ 4.824554] cma: dma_alloc_from_contiguous(): returned 8143c000 [ 4.825042] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok [ 4.831634] cma: dma_alloc_from_contiguous(cma bf932a00, count 32, align 5) [ 4.832183] cma: dma_alloc_from_contiguous(): returned 8143c400 [ 4.832672] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok [ 4.840454] cma: dma_alloc_from_contiguous(cma bf932a00, count 32, align 5) [ 4.841064] cma: dma_alloc_from_contiguous(): returned 8143c800 [ 4.841552] cma: dma_alloc_from_contiguous(cma bf932a00, count 32, align 5) [ 4.842071] cma: dma_alloc_from_contiguous(): returned 8143cc00 [ 4.842529] asoc: snd-soc-dummy-dai <-> Voice mapping ok [ 4.848663] cma: dma_alloc_from_contiguous(cma bf932a00, count 32, align 5) [ 4.849487] cma: dma_alloc_from_contiguous(): returned 8143d000 [ 4.849945] asoc: snd-soc-dummy-dai <-> Tones mapping ok [ 4.856109] cma: dma_alloc_from_contiguous(cma bf932a00, count 32, align 5) [ 4.857116] cma: dma_alloc_from_contiguous(): returned 8143d400 [ 4.857574] asoc: snd-soc-dummy-dai <-> Vibra mapping ok [ 4.863677] asoc: snd-soc-dummy-dai <-> MODEM mapping ok [ 4.869842] usb 1-1.1: udev 3, busnum 1, minor = 2 [ 4.869873] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 4.877441] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok [ 4.884033] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.892150] asoc: snd-soc-dummy-dai <-> omap-mcbsp-dai.1 mapping ok [ 4.899475] cma: dma_alloc_from_contiguous(cma bf932a00, count 32, align 5) [ 4.899475] usb 1-1.1: usb_probe_device [ 4.899505] usb 1-1.1: configuration #1 chosen from 1 choice [ 4.900634] cma: dma_alloc_from_contiguous(): returned 8143d800 [ 4.901184] cma: dma_alloc_from_contiguous(cma bf932a00, count 32, align 5) [ 4.901885] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [ 4.902374] cma: dma_alloc_from_contiguous(): returned 8143dc00 [ 4.902404] smsc95xx 1-1.1:1.0: usb_probe_interface [ 4.902404] smsc95xx 1-1.1:1.0: usb_probe_interface - got id [ 4.902465] smsc95xx v1.0.4 [ 4.902954] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok [ 4.903228] twl6040-codec twl6040-codec: dapm: unknown pin Vinrator [ 4.903259] twl6040-codec twl6040-codec: dapm: unknown pin Ext Mic [ 4.903289] twl6040-codec twl6040-codec: dapm: unknown pin Ext Spk [ 4.903289] twl6040-codec twl6040-codec: dapm: unknown pin Headset Mic [ 4.903320] twl6040-codec twl6040-codec: dapm: unknown pin Headset Stereophone [ 4.903320] twl6040-codec twl6040-codec: dapm: unknown pin Digital Mic 0 [ 4.903350] twl6040-codec twl6040-codec: dapm: unknown pin Digital Mic 1 [ 4.903350] twl6040-codec twl6040-codec: dapm: unknown pin Digital Mic 2 [ 4.903442] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok [ 4.903808] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok [ 4.904083] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok [ 4.904327] asoc: twl6040-vib <-> mcpdm-vib mapping ok [ 4.904602] asoc: snd-soc-dummy-dai <-> omap-mcbsp-dai.0 mapping ok [ 4.904846] asoc: snd-soc-dummy-dai <-> omap-mcbsp-dai.0 mapping ok [ 4.905120] asoc: snd-soc-dummy-dai <-> omap-mcbsp-dai.1 mapping ok [ 5.015045] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 5.026458] Error: Driver 'hdmi-audio-dai' is already registered, aborting... [ 5.034973] cma: dma_alloc_from_contiguous(cma bf932a00, count 32, align 5) [ 5.035949] cma: dma_alloc_from_contiguous(): returned 8143e000 [ 5.036529] asoc: omap4-hdmi-audio-codec <-> hdmi-audio-dai mapping ok [ 5.045013] ALSA device list: [ 5.048309] #0: PandaBoard [ 5.051361] #1: OMAP4HDMI [ 5.054504] u32 classifier [ 5.057617] Actions configured [ 5.062683] TCP cubic registered [ 5.067840] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 5.074035] NET: Registered protocol family 10 [ 5.080322] mmc1: new SDIO card at address 0001 [ 5.089019] NET: Registered protocol family 17 [ 5.095336] lib80211: common routines for IEEE802.11 drivers [ 5.101409] lib80211_crypt: registered algorithm 'NULL' [ 5.101440] lib80211_crypt: registered algorithm 'WEP' [ 5.101440] lib80211_crypt: registered algorithm 'CCMP' [ 5.101470] lib80211_crypt: registered algorithm 'TKIP' [ 5.101776] Registering the dns_resolver key type [ 5.106964] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 5.115325] ThumbEE CPU extension supported. [ 5.120056] Registering SWP/SWPB emulation handler [ 5.131866] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 2a:40:8e:cc:3b:0a [ 5.145782] hub 1-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 5.148803] omap_sr_disable: omap_sr struct for sr_mpu not found [ 5.155303] omap_sr_disable: omap_sr struct for sr_core not found [ 5.162109] Power Management for TI OMAP4XX/OMAP5XXX devices. [ 5.168365] hwmod gpmc not found [ 5.171936] sr_init: No PMIC hook to init smartreflex [ 5.177459] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 5.186004] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 5.194366] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 5.203094] SmartReflex Class3 initialized [ 5.211822] clock: disabling unused clocks to save power [ 5.221435] registered taskstats version 1 [ 5.240203] usb 1-1.2: new low-speed USB device number 4 using ehci-omap [ 5.256774] regulator_init_complete: VANA: incomplete constraints, leaving on [ 5.266784] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 5.275878] regulator_init_complete: VUSB: incomplete constraints, leaving on [ 5.284698] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 5.293670] cma: dma_alloc_from_contiguous(cma bf932a00, count 129, align 8) [ 5.295135] cma: dma_alloc_from_contiguous(): returned 8143f000 [ 5.299133] dmm dmm: initialized all PAT entries [ 5.372619] usb 1-1.2: skipped 1 descriptor after interface [ 5.373382] usb 1-1.2: default language 0x0409 [ 5.377471] usb 1-1.2: udev 4, busnum 1, minor = 3 [ 5.377532] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=0024 [ 5.384887] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.392730] usb 1-1.2: Product: HP Basic USB Keyboard [ 5.395111] usb 1-1.2: Manufacturer: CHICONY [ 5.403869] usb 1-1.2: usb_probe_device [ 5.403869] usb 1-1.2: configuration #1 chosen from 1 choice [ 5.404571] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 5.404937] usbtest 1-1.2:1.0: usb_probe_interface [ 5.404937] usbtest 1-1.2:1.0: usb_probe_interface - got id [ 5.405761] hub 1-1:1.0: port 3, status 0301, change 0000, 1.5 Mb/s [ 5.486022] usb 1-1.3: new low-speed USB device number 5 using ehci-omap [ 5.614105] usb 1-1.3: skipped 1 descriptor after interface [ 5.615020] usb 1-1.3: default language 0x0409 [ 5.617767] usb 1-1.3: udev 5, busnum 1, minor = 4 [ 5.617767] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c06a [ 5.625122] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.632965] usb 1-1.3: Product: USB Optical Mouse [ 5.638061] usb 1-1.3: Manufacturer: Logitech [ 5.643981] usb 1-1.3: usb_probe_device [ 5.643981] usb 1-1.3: configuration #1 chosen from 1 choice [ 5.644439] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) [ 5.644775] usbtest 1-1.3:1.0: usb_probe_interface [ 5.644775] usbtest 1-1.3:1.0: usb_probe_interface - got id [ 5.645385] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0004 [ 6.313537] Initial hdmi_get_current_hpd says connected [ 6.319702] hdmi_check_hpd_state says 1 [ 7.039855] hub 2-0:1.0: hub_suspend [ 7.039886] usb usb2: bus auto-suspend, wakeup 1 [ 7.039916] ohci-omap3 ohci-omap3.0: suspend root hub [ 7.344787] Initial hdmi_get_current_hpd says connected [ 7.350860] hdmi_check_hpd_state says 1 [ 8.391632] Initial hdmi_get_current_hpd says connected [ 8.397705] hdmi_check_hpd_state says 1 [ 8.477996] [drm] Enabling DMM ywrap scrolling [ 9.493194] Initial hdmi_get_current_hpd says connected [ 9.493774] hdmi_check_hpd_state says 1 [ 9.538543] Console: switching to colour frame buffer device 240x67 [ 9.580963] fb0: omapdrm frame buffer device [ 9.580993] drm: registered panic notifier [ 9.590057] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.597290] [drm] No driver support for vblank timestamp query. [ 9.603759] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 9.610870] Freeing init memory: 432K [ 9.692077] udevd[894]: starting version 175 [ 10.070526] usbhid 1-1.2:1.0: usb_probe_interface [ 10.070678] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 10.076751] input: CHICONY HP Basic USB Keyboard as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input0 [ 10.093688] usb 1-1.2: link qh8-0e01/bd649fc0 start 2 [1/2 us] [ 10.094116] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-ehci-omap.0-1.2/input0 [ 10.110473] usbhid 1-1.3:1.0: usb_probe_interface [ 10.110595] usbhid 1-1.3:1.0: usb_probe_interface - got id [ 10.116729] input: Logitech USB Optical Mouse as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input1 [ 10.133697] generic-usb 0003:046D:C06A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-ehci-omap.0-1.3/input0 [ 10.142913] usbcore: registered new interface driver usbhid [ 10.154479] usbhid: USB HID core driver [ 10.504730] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 12.151824] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.210174] udevd[1126]: starting version 175 [ 12.443969] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 13.514190] Bluetooth: Core ver 2.16 [ 13.514190] NET: Registered protocol family 31 [ 13.514312] Bluetooth: HCI device and connection manager initialized [ 13.514312] Bluetooth: HCI socket layer initialized [ 13.514343] Bluetooth: L2CAP socket layer initialized [ 13.514373] Bluetooth: SCO socket layer initialized [ 13.550659] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0 [ 15.404968] lp: driver loaded but no devices found [ 15.435272] ppdev: user-space parallel port driver [ 15.511566] Bluetooth: RFCOMM TTY layer initialized [ 15.511566] Bluetooth: RFCOMM socket layer initialized [ 15.511627] Bluetooth: RFCOMM ver 1.11 [ 15.615356] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.615356] Bluetooth: BNEP filters: protocol multicast [ 15.935699] cfg80211: Calling CRDA to update world regulatory domain [ 16.375366] cfg80211: World regulatory domain updated: [ 16.375366] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 16.375396] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.375396] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.375427] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.375457] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.375457] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.468444] usb 1-1.1: link qh8-0001/bcff0c40 start 3 [1/0 us] [ 16.632385] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 16.632385] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632385] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 16.632659] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632659] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 16.632690] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632690] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 16.632720] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632720] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 16.632751] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632751] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 16.632751] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632781] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 16.632781] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632812] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 16.632812] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632843] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 16.632843] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632873] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 16.632873] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632904] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 16.632904] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.632934] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 16.632934] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.632965] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 16.632965] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.632995] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 16.632995] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.632995] cfg80211: Disabling freq 5035 MHz [ 16.633026] cfg80211: Disabling freq 5040 MHz [ 16.633026] cfg80211: Disabling freq 5045 MHz [ 16.633026] cfg80211: Disabling freq 5055 MHz [ 16.633056] cfg80211: Disabling freq 5060 MHz [ 16.633056] cfg80211: Disabling freq 5080 MHz [ 16.633056] cfg80211: Disabling freq 5170 MHz [ 16.633087] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 16.633087] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633117] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule: [ 16.633117] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633148] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 16.633148] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633178] cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule: [ 16.633178] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633209] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 16.633209] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633239] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule: [ 16.633239] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633239] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 16.633270] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633270] cfg80211: Disabling freq 5260 MHz [ 16.633300] cfg80211: Disabling freq 5280 MHz [ 16.633300] cfg80211: Disabling freq 5300 MHz [ 16.633300] cfg80211: Disabling freq 5320 MHz [ 16.633331] cfg80211: Disabling freq 5500 MHz [ 16.633331] cfg80211: Disabling freq 5520 MHz [ 16.633331] cfg80211: Disabling freq 5540 MHz [ 16.633331] cfg80211: Disabling freq 5560 MHz [ 16.633361] cfg80211: Disabling freq 5580 MHz [ 16.633361] cfg80211: Disabling freq 5600 MHz [ 16.633361] cfg80211: Disabling freq 5620 MHz [ 16.633392] cfg80211: Disabling freq 5640 MHz [ 16.633392] cfg80211: Disabling freq 5660 MHz [ 16.633392] cfg80211: Disabling freq 5680 MHz [ 16.633392] cfg80211: Disabling freq 5700 MHz [ 16.633422] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 16.633422] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633453] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 16.633453] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633483] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 16.633483] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633514] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 16.633575] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.633636] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 16.633666] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.646240] wl12xx: loaded [ 17.150604] wl12xx: firmware booted (Rev 6.3.5.0.98) [ 17.166320] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.169555] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.024566] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 18.530731] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 26.610137] eth0: no IPv6 routers present [ 70.355651] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008 [ 70.356170] hub 1-1:1.0: port 3, status 0100, change 0001, 12 Mb/s [ 70.356170] usb 1-1.3: USB disconnect, device number 5 [ 70.356231] usb 1-1.3: unregistering device [ 70.356231] usb 1-1.3: unregistering interface 1-1.3:1.0 [ 70.399688] usb 1-1.3: usb_disable_device nuking all URBs [ 70.556488] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x100 [ 71.379577] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008 [ 71.380035] hub 1-1:1.0: port 3, status 0301, change 0001, 1.5 Mb/s [ 71.532989] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 [ 71.619018] usb 1-1.3: new low-speed USB device number 6 using ehci-omap [ 71.739288] usb 1-1.3: skipped 1 descriptor after interface [ 71.739654] usb 1-1.3: default language 0x0409 [ 71.741424] usb 1-1.3: udev 6, busnum 1, minor = 5 [ 71.741424] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c06a [ 71.741485] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 71.741485] usb 1-1.3: Product: USB Optical Mouse [ 71.741516] usb 1-1.3: Manufacturer: Logitech [ 71.741882] usb 1-1.3: usb_probe_device [ 71.741882] usb 1-1.3: configuration #1 chosen from 1 choice [ 71.742309] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) [ 71.742309] usbtest 1-1.3:1.0: usb_probe_interface [ 71.742614] usbtest 1-1.3:1.0: usb_probe_interface - got id [ 71.742614] usbhid 1-1.3:1.0: usb_probe_interface [ 71.742675] usbhid 1-1.3:1.0: usb_probe_interface - got id [ 71.747070] input: Logitech USB Optical Mouse as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2 [ 71.747314] generic-usb 0003:046D:C06A.0003: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-ehci-omap.0-1.3/input0 [ 71.747772] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008 [ 131.795471] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008 [ 131.795928] hub 1-1:1.0: port 3, status 0100, change 0001, 12 Mb/s [ 131.795928] usb 1-1.3: USB disconnect, device number 6 [ 131.795959] usb 1-1.3: unregistering device [ 131.795959] usb 1-1.3: unregistering interface 1-1.3:1.0 [ 131.829315] usb 1-1.3: usb_disable_device nuking all URBs [ 131.986206] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x100 [ 133.075378] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008 [ 133.075866] hub 1-1:1.0: port 3, status 0301, change 0001, 1.5 Mb/s [ 133.228332] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 [ 133.314361] usb 1-1.3: new low-speed USB device number 7 using ehci-omap [ 133.434509] usb 1-1.3: skipped 1 descriptor after interface [ 133.434875] usb 1-1.3: default language 0x0409 [ 133.436492] usb 1-1.3: udev 7, busnum 1, minor = 6 [ 133.436553] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c06a [ 133.436553] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 133.436584] usb 1-1.3: Product: USB Optical Mouse [ 133.436614] usb 1-1.3: Manufacturer: Logitech [ 133.439544] usb 1-1.3: usb_probe_device [ 133.439575] usb 1-1.3: configuration #1 chosen from 1 choice [ 133.439849] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) [ 133.440063] usbtest 1-1.3:1.0: usb_probe_interface [ 133.440155] usbtest 1-1.3:1.0: usb_probe_interface - got id [ 133.440155] usbhid 1-1.3:1.0: usb_probe_interface [ 133.440216] usbhid 1-1.3:1.0: usb_probe_interface - got id [ 133.447265] input: Logitech USB Optical Mouse as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input3 [ 133.447845] generic-usb 0003:046D:C06A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-ehci-omap.0-1.3/input0 [ 133.448211] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008 [ 134.669891] init: failsafe main process (1278) killed by TERM signal [ 135.020080] init: alsa-restore main process (1506) terminated with status 99 [ 135.022949] init: hybrid-gfx main process (1517) terminated with status 1 [ 135.460510] init: tty1 main process (1565) killed by TERM signal [ 136.527435] omapdss error: operation stopped when reading edid [ 136.561401] omapdss error: operation stopped when reading edid [ 137.767364] Initial hdmi_get_current_hpd says connected [ 137.767669] hdmi_check_hpd_state says 1 [ 138.829101] Initial hdmi_get_current_hpd says connected [ 138.829437] hdmi_check_hpd_state says 1 [ 139.355041] usb 1-1.3: link qh8-0e01/bac39a00 start 4 [1/2 us] [ 157.034271] omapdss error: operation stopped when reading edid [ 157.225463] usb usb2: usb auto-resume [ 157.225494] ohci-omap3 ohci-omap3.0: resume root hub [ 157.329528] hub 2-0:1.0: hub_resume [ 157.330871] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 157.622741] warning: process `colord' used the deprecated sysctl system call with 8.1.2. [ 158.586700] Initial hdmi_get_current_hpd says connected [ 158.587005] hdmi_check_hpd_state says 1 [ 162.029388] hub 2-0:1.0: hub_suspend [ 162.029449] usb usb2: bus auto-suspend, wakeup 1 [ 162.029479] ohci-omap3 ohci-omap3.0: suspend root hub [ 165.497375] usb usb2: usb auto-resume [ 165.497528] ohci-omap3 ohci-omap3.0: resume root hub [ 165.602600] hub 2-0:1.0: hub_resume [ 165.602691] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 171.075836] hub 2-0:1.0: hub_suspend [ 171.075836] usb usb2: bus auto-suspend, wakeup 1 [ 171.075836] ohci-omap3 ohci-omap3.0: suspend root hub [ 175.190124] OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink [ 175.191802] OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink [ 175.192352] OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink [ 175.198486] OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink [ 175.218688] OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink [ 175.218688] OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink [ 175.220001] OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink [ 175.220611] OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink [ 175.232971] OMAP ABE Media: asoc: OMAP ABE Media no valid capture route from source to sink [ 175.233947] OMAP ABE Media: asoc: OMAP ABE Media no valid capture route from source to sink [ 181.411712] omapdss error: operation stopped when reading edid root@linaro-ubuntu-desktop:~#