snowball fails to boot 20120316 hwpack & ubuntu desktop
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
IglooCommunity |
Fix Released
|
High
|
Kalle Vahlman | ||
Linaro Multimedia WG project |
Fix Released
|
High
|
Unassigned | ||
Linaro Ubuntu |
Fix Released
|
Undecided
|
Unassigned |
Bug Description
Snowball fails to boot with oneiric 3/16 2012 lt hwpack and oneiric ubuntu-desktop 3/16 build.
Enclosed is the log. No output on my HDMI screen.
Snowball is a V11
Press CTRL-A Z for help on special keys
4681328 bytes read
## Booting kernel from Legacy Image at 00100000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4681264 Bytes = 4.5 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.2.0-1000-ux500 (buildd@
[ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
[ 0.000000] Machine: ST-Ericsson Snowball platform
[ 0.000000] Only cachepolicy=
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] DB8500 v2.2 [0x008500b2]
[ 0.000000] Reserving 1MB of memory at 86MB for crashkernel (System RAM: 760)
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1605000 s12064 r8192 d12512 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa0
[ 0.000000] Kernel command line: cachepolicy=
[ 0.000000] Startup graphics support
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 383MB 640MB = 1023MB total
[ 0.000000] Memory: 1023112k/1023112k available, 24440k reserved, 270336K him
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xf7800000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc08f263c (9130 kB)
[ 0.000000] .init : 0xc08f3000 - 0xc0948f20 ( 344 kB)
[ 0.000000] .data : 0xc094a000 - 0xc09d12f8 ( 541 kB)
[ 0.000000] .bss : 0xc09d131c - 0xc0dfbb2c (4267 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] PRCMU firmware version 3.4.3
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 1s
[ 0.000000] Console: colour dummy device 80x30
[ 0.149963] Calibrating delay using timer specific routine.. 4.80 BogoMIPS ()
[ 0.150024] pid_max: default: 32768 minimum: 301
[ 0.150238] Security Framework initialized
[ 0.150360] AppArmor: AppArmor initialized
[ 0.150512] Mount-cache hash table entries: 512
[ 0.151611] Initializing cgroup subsys cpuacct
[ 0.151733] CPU: Testing write buffer coherency: ok
[ 0.151794] ftrace: allocating 24539 entries in 73 pages
[ 0.174652] CPU0: thread -1, cpu 0, socket 3, mpidr 80000300
[ 0.174804] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 countee
[ 0.174896] L310 cache controller enabled
[ 0.174926] l2x0: 8 ways, CACHE_ID 0x410000c5, AUX_CTRL 0x7e060800, Cache siB
[ 0.275360] CPU1: Booted secondary processor
[ 0.275360] CPU1: thread -1, cpu 1, socket 3, mpidr 80000301
[ 0.275421] Brought up 2 CPUs
[ 0.275421] SMP: Total of 2 processors activated (9.61 BogoMIPS).
[ 0.276123] devtmpfs: initialized
[ 0.281402] print_constraints: dummy:
[ 0.281829] NET: Registered protocol family 16
[ 0.284820] gpio gpio.0: Bits 0-31 at address f812e000
[ 0.285278] gpio gpio.1: Bits 32-63 at address f812e080
[ 0.285888] gpio gpio.2: Bits 64-95 at address f800e000
[ 0.286315] gpio gpio.3: Bits 96-127 at address f800e080
[ 0.286895] gpio gpio.4: Bits 128-159 at address f800e100
[ 0.287353] gpio gpio.5: Bits 160-191 at address f800e180
[ 0.287963] gpio gpio.6: Bits 192-223 at address f811e000
[ 0.288391] gpio gpio.7: Bits 224-255 at address f811e080
[ 0.288848] gpio gpio.8: Bits 256-287 at address fa3fe000
[ 0.294464] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint.
[ 0.294464] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.296508] stm stm: STM-Trace driver probed successfully
[ 0.297271] print_constraints: db8500-vape:
[ 0.297546] print_constraints: db8500-varm:
[ 0.297790] print_constraints: db8500-vmodem:
[ 0.298004] print_constraints: db8500-vpll:
[ 0.298248] print_constraints: db8500-vsmps1:
[ 0.298461] print_constraints: db8500-vsmps2:
[ 0.298706] print_constraints: db8500-vsmps3:
[ 0.298919] print_constraints: db8500-vrf1:
[ 0.299163] print_constraints: db8500-sva-mmdsp:
[ 0.299194] set_supply: db8500-sva-mmdsp: supplied by db8500-vape
[ 0.299438] print_constraints: db8500-
[ 0.299682] print_constraints: db8500-sva-pipe:
[ 0.299713] set_supply: db8500-sva-pipe: supplied by db8500-vape
[ 0.299987] print_constraints: db8500-sia-mmdsp:
[ 0.299987] set_supply: db8500-sia-mmdsp: supplied by db8500-vape
[ 0.300262] print_constraints: db8500-
[ 0.300506] print_constraints: db8500-sia-pipe:
[ 0.300506] set_supply: db8500-sia-pipe: supplied by db8500-vape
[ 0.300781] print_constraints: db8500-sga:
[ 0.300811] set_supply: db8500-sga: supplied by db8500-vape
[ 0.301086] print_constraints: db8500-b2r2-mcde:
[ 0.301116] set_supply: db8500-b2r2-mcde: supplied by db8500-vape
[ 0.301391] print_constraints: db8500-esram12:
[ 0.301391] set_supply: db8500-esram12: supplied by db8500-vape
[ 0.301696] print_constraints: db8500-esram12-ret:
[ 0.301910] print_constraints: db8500-esram34:
[ 0.301940] set_supply: db8500-esram34: supplied by db8500-vape
[ 0.302215] print_constraints: db8500-esram34-ret:
[ 0.302490] DB8500 PRCMU initialized
[ 0.302764] ab8500-i2c ab8500-i2c.0: detected chip, revision: 0x30
[ 0.302825] ab8500-i2c ab8500-i2c.0: switch off status: 0x20
[ 0.308746] HWMEM: hwmem_paddr != PAGE_ALIGN(
[ 0.337280] bio: create slab <bio-0> at 0
[ 0.338104] dma40 dma40.0: managed by runtime pm: regulator
[ 0.338195] dma40 dma40.0: hardware revision: 3 @ 0x801c0000
[ 0.338256] dma40 dma40.0: 6 of 8 physical DMA channels available
[ 0.338287] dma40 dma40.0: [d40_phy_res_init] INFO: channel 4 is misconfigur)
[ 0.338287] dma40 dma40.0: [d40_phy_res_init] INFO: channel 5 is misconfigur)
[ 0.338287] dma40 dma40.0: [d40_phy_res_init] INFO: channel 6 is misconfigur)
[ 0.347503] dma40 dma40.0: initialized
[ 0.348175] print_constraints: EN-3V3: 3300 mV
[ 0.348663] print_constraints: WLAN-VBAT: 3600 mV
[ 0.350799] print_constraints: ab8500-ext-supply3: 3400 mV
[ 0.351135] print_constraints: V-DISPLAY: 2800 <--> 3300 mV at 2800 mV
[ 0.351165] set_supply: V-DISPLAY: supplied by ab8500-ext-supply3
[ 0.351531] print_constraints: V-eMMC1: 1100 <--> 3300 mV at 2900 mV normal
[ 0.351562] set_supply: V-eMMC1: supplied by ab8500-ext-supply3
[ 0.351898] print_constraints: V-MMC-SD: 1200 <--> 2910 mV at 2910 mV normal
[ 0.351959] set_supply: V-MMC-SD: supplied by ab8500-ext-supply3
[ 0.352264] print_constraints: V-INTCORE: 1250 <--> 1350 mV at 1250 mV norma
[ 0.352539] print_constraints: V-TVOUT: 2000 mV
[ 0.352813] print_constraints: LDO-USB: 3300 mV
[ 0.353057] print_constraints: V-AUD: 2000 mV
[ 0.353332] print_constraints: V-AMIC1: 2050 mV
[ 0.353576] print_constraints: V-AMIC2: 2050 mV
[ 0.353851] print_constraints: V-DMIC: 1800 mV
[ 0.354095] print_constraints: V-CSI-DSI: 1200 mV
[ 0.354370] print_constraints: V-SYSCLKREQ-2: 0 mV
[ 0.354583] print_constraints: V-SYSCLKREQ-4: 0 mV
[ 0.358245] Serial: AMBA PL011 UART driver
[ 0.358459] uart0: ttyAMA0 at MMIO 0x80120000 (irq = 43) is a PL011 rev3
[ 0.395660] uart1: ttyAMA1 at MMIO 0x80121000 (irq = 51) is a PL011 rev3
[ 0.425506] uart2: ttyAMA2 at MMIO 0x80007000 (irq = 58) is a PL011 rev3
[ 1.152343] console [ttyAMA2] enabled
[ 1.197357] hwmem hwmem.0: Probed OK
[ 1.203430] SCSI subsystem initialized
[ 1.207244] ssp-pl022 ssp0: managed by runtime pm: regulator
[ 1.213043] ssp-pl022 ssp0: ARM PL022 driver, device ID: 0x01080022
[ 1.219360] pl022: mapped registers from 0x80002000 to f0040000
[ 1.225280] ssp-pl022 ssp0: Unbalanced pm_runtime_enable!
[ 1.230926] ssp-pl022 ssp0: setup for DMA on RX dma0chan0, TX dma0chan1
[ 1.237854] ssp-pl022 ssp0: runtime pm suspend before resume
[ 1.244384] usbcore: registered new interface driver usbfs
[ 1.250061] usbcore: registered new interface driver hub
[ 1.255554] usbcore: registered new device driver usb
[ 1.261138] ab8500-usb ab8500-usb.0: managed by runtime pm: pins
[ 1.268188] ab8500-usb ab8500-usb.0: revision 0x30 driver initialized
[ 1.274627] prcmu qos: get cpufreq policy failed (cpu0)
[ 1.279907] prcmu qos: get cpufreq policy failed (cpu1)
[ 1.286315] nmk-i2c nmk-i2c.0: managed by runtime pm: pins
[ 1.292053] nmk-i2c nmk-i2c.0: initialize Nomadik I2C0 at 80004000 on virtua0
[ 1.300842] nmk-i2c nmk-i2c.1: managed by runtime pm: pins
[ 1.306549] nmk-i2c nmk-i2c.1: initialize Nomadik I2C1 at 80122000 on virtua0
[ 1.315185] nmk-i2c nmk-i2c.2: managed by runtime pm: pins
[ 1.320892] nmk-i2c nmk-i2c.2: initialize Nomadik I2C2 at 80128000 on virtua0
[ 1.329284] power state: unbalanced enable/disable calls
[ 1.334808] nmk-i2c nmk-i2c.3: managed by runtime pm: pins
[ 1.340515] nmk-i2c nmk-i2c.3: initialize Nomadik I2C3 at 80110000 on virtua0
[ 1.350463] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 1.357818] Bluetooth: Core ver 2.16
[ 1.361541] NET: Registered protocol family 31
[ 1.365997] Bluetooth: HCI device and connection manager initialized
[ 1.372375] Bluetooth: HCI socket layer initialized
[ 1.377349] Bluetooth: L2CAP socket layer initialized
[ 1.382415] Bluetooth: SCO socket layer initialized
[ 1.387786] cfg80211: Calling CRDA to update world regulatory domain
[ 1.394256] NetLabel: Initializing
[ 1.397705] NetLabel: domain hash size = 128
[ 1.402069] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.407104] NetLabel: unlabeled traffic allowed by default
[ 1.436798] ab8500-btemp ab8500-btemp.0: Battery identified as unknown, resim
[ 1.445343] ab8500-btemp ab8500-btemp.0: failed to identify the battery
[ 1.462768] Switching to clocksource dbx500-prcmu-timer
[ 1.482147] AppArmor: AppArmor Filesystem Enabled
[ 1.486877] MCDE subsystem init begin
[ 1.490722] mcde mcde: MCDE iomap: 0xA0350000-
[ 1.496124] mcde mcde: MCDE DSI0 iomap: 0xA0351000-
[ 1.501983] mcde mcde: MCDE DSI1 iomap: 0xA0352000-
[ 1.507812] mcde mcde: MCDE DSI2 iomap: 0xA0353000-
[ 1.513824] mcde mcde: Probe HW
[ 1.517059] mcde mcde: MCDE HW revision 3.0.8.0
[ 1.521667] mcde mcde: V2 HW
[ 1.526062] MCDE subsystem init done
[ 1.547241] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 1.554046] musb-hdrc musb-hdrc: USB OTG mode controller at f0060000 using D5
[ 1.562377] NET: Registered protocol family 2
[ 1.566986] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.574951] TCP established hash table entries: 131072 (order: 8, 1048576 by)
[ 1.583892] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 1.591369] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.597961] TCP reno registered
[ 1.601135] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.607055] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.613708] NET: Registered protocol family 1
[ 1.618377] NetWinder Floating Point Emulator V0.97 (double precision)
[ 1.626892] ux500-product: JTAG is disabled
[ 1.633361] audit: initializing netlink socket (disabled)
[ 1.638854] type=2000 audit(0.920:1): initialized
[ 1.658508] highmem bounce pool size: 64 pages
[ 1.663330] VFS: Disk quotas dquot_6.5.2
[ 1.667480] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.674804] Installing v9fs 9p2000 file system support
[ 1.680023] msgmni has been set to 1470
[ 1.684692] io scheduler noop registered
[ 1.689514] io scheduler deadline registered (default)
[ 1.694732] io scheduler cfq registered
[ 1.698730] mcde_display_
[ 1.702758] mcde_display_
[ 1.712768] av8100 0-0070: chip version:2
[ 1.773437] i2c-core: driver [av8100] using legacy suspend method
[ 1.779602] i2c-core: driver [av8100] using legacy resume method
[ 1.785644] b2r2_init
[ 1.790649] B2R2_MEM: Creating heap for size 16384 bytes
[ 1.797088] uart-pl011 uart0: no DMA platform data
[ 1.801910] uart-pl011 uart1: no DMA platform data
[ 1.806701] uart-pl011 uart2: no DMA platform data
[ 1.811920] [drm] Initialized drm 1.1.0 20060810
[ 1.817535] Mali<2>:
[ 1.819824] Mali<2>: Inserting Mali v8 device driver.
[ 1.824981] Mali<2>: Compiled: Mar 5 2012, time: 17:00:11.
[ 1.830566] Mali<2>: Svn revision:
[ 1.834045] Mali<2>: MMU memory system initializing
[ 1.838958] Mali<2>: Rendercore: subsystem global mutex initialized
[ 1.845214] Mali<2>: Core: subsystem_init: Mali-400 PP
[ 1.850372] Mali<2>: Core: subsystem_init: Mali-400 GP
[ 1.855499] Mali<2>: Mali L2 cache system initializing
[ 1.860717] create_regulator: db8500-sga: Failed to create debugfs directory
[ 1.868041] Mali<2>: MMU registered
[ 1.871582] Mali<2>: MMU registered
[ 1.875091] Mali<1>: Failed to request memory region Mali SDRAM (0x08000000 )
[ 1.883270] Mali<2>: Mali L2 cache system terminating
[ 1.888336] Mali<2>: Core: subsystem_cleanup: Mali-400 GP
[ 1.893859] Mali<2>: Core: subsystem_cleanup: Mali-400 PP
no longer affects: | linaro-landing-team-ste |
Changed in igloocommunity: | |
assignee: | nobody → Lee Jones (lag) |
assignee: | Lee Jones (lag) → nobody |
summary: |
- snowball fails to boot 3/16 hwpack & ubuntu desktop + snowball fails to boot 20120316 hwpack & ubuntu desktop |
Changed in igloocommunity: | |
milestone: | none → 2012.04 |
Changed in igloocommunity: | |
status: | Won't Fix → Fix Released |
milestone: | 2012.04 → 2012.03-1 |
Changed in linaro-multimedia-project: | |
status: | Confirmed → Fix Released |
Changed in linaro-ubuntu: | |
milestone: | none → 12.04 |
status: | New → Fix Released |
This is blocking UCM for snowball in 12.03