| 2014-05-23 10:27:30 |
Botao |
bug |
|
|
added bug |
| 2014-05-23 10:36:47 |
Botao |
description |
On TI Panda 4430 board with Linux Linaro ubuntu image:
http://snapshots.linaro.org/ubuntu/pre-built/panda/651/panda-trusty_developer_20140522-651.img.gz
SSH connection failed.
Procedures:
root@linaro-developer:~# apt-get install ssh
root@linaro-developer:~# passwd
Type new password.
root@linaro-developer:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr ea:a7:8c:73:a9:e5
inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e8a7:8cff:fe73:a9e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2288 errors:0 dropped:0 overruns:0 frame:0
TX packets:3425 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1014872 (1.0 MB) TX bytes:3870579 (3.8 MB)
root@linaro-developer:~#
On host PC, run:
$ ssh root@192.168.1.7
The authenticity of host '192.168.1.7 (192.168.1.7)' can't be established.
ECDSA key fingerprint is cf:84:61:7e:5d:58:41:9d:74:79:ca:a0:2e:9c:9f:a2.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.7' (ECDSA) to the list of known hosts.
root@192.168.1.7's password:
Permission denied, please try again.
root@192.168.1.7's password:
The password typed is correct, but connection failed.
Due to this failure, the SSH connection test and remote debug in DS5 have been blocked. |
On TI Panda 4430 & 4460 board with Linux Linaro ubuntu image:
http://snapshots.linaro.org/ubuntu/pre-built/panda/651/panda-trusty_developer_20140522-651.img.gz
SSH connection failed.
Procedures:
root@linaro-developer:~# apt-get install ssh
root@linaro-developer:~# passwd
Type new password.
root@linaro-developer:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr ea:a7:8c:73:a9:e5
inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e8a7:8cff:fe73:a9e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2288 errors:0 dropped:0 overruns:0 frame:0
TX packets:3425 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1014872 (1.0 MB) TX bytes:3870579 (3.8 MB)
root@linaro-developer:~#
On host PC, run:
$ ssh root@192.168.1.7
The authenticity of host '192.168.1.7 (192.168.1.7)' can't be established.
ECDSA key fingerprint is cf:84:61:7e:5d:58:41:9d:74:79:ca:a0:2e:9c:9f:a2.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.7' (ECDSA) to the list of known hosts.
root@192.168.1.7's password:
Permission denied, please try again.
root@192.168.1.7's password:
The password typed is correct, but connection failed.
Due to this failure, the SSH connection test and remote debug in DS5 have been blocked. |
|
| 2014-05-28 08:55:47 |
Botao |
description |
On TI Panda 4430 & 4460 board with Linux Linaro ubuntu image:
http://snapshots.linaro.org/ubuntu/pre-built/panda/651/panda-trusty_developer_20140522-651.img.gz
SSH connection failed.
Procedures:
root@linaro-developer:~# apt-get install ssh
root@linaro-developer:~# passwd
Type new password.
root@linaro-developer:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr ea:a7:8c:73:a9:e5
inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e8a7:8cff:fe73:a9e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2288 errors:0 dropped:0 overruns:0 frame:0
TX packets:3425 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1014872 (1.0 MB) TX bytes:3870579 (3.8 MB)
root@linaro-developer:~#
On host PC, run:
$ ssh root@192.168.1.7
The authenticity of host '192.168.1.7 (192.168.1.7)' can't be established.
ECDSA key fingerprint is cf:84:61:7e:5d:58:41:9d:74:79:ca:a0:2e:9c:9f:a2.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.7' (ECDSA) to the list of known hosts.
root@192.168.1.7's password:
Permission denied, please try again.
root@192.168.1.7's password:
The password typed is correct, but connection failed.
Due to this failure, the SSH connection test and remote debug in DS5 have been blocked. |
On TI Panda 4430, 4460 and Samsung Arndale board with Linux Linaro ubuntu image:
http://snapshots.linaro.org/ubuntu/pre-built/panda/651/panda-trusty_developer_20140522-651.img.gz
SSH connection failed with "root" account.
Procedures:
root@linaro-developer:~# apt-get install ssh
root@linaro-developer:~# passwd
Type new password.
root@linaro-developer:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr ea:a7:8c:73:a9:e5
inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e8a7:8cff:fe73:a9e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2288 errors:0 dropped:0 overruns:0 frame:0
TX packets:3425 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1014872 (1.0 MB) TX bytes:3870579 (3.8 MB)
root@linaro-developer:~#
On host PC, run:
$ ssh root@192.168.1.7
The authenticity of host '192.168.1.7 (192.168.1.7)' can't be established.
ECDSA key fingerprint is cf:84:61:7e:5d:58:41:9d:74:79:ca:a0:2e:9c:9f:a2.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.7' (ECDSA) to the list of known hosts.
root@192.168.1.7's password:
Permission denied, please try again.
root@192.168.1.7's password:
The password typed is correct, but connection failed.
However, if using "linaro" account, everything just works well. |
|
| 2014-05-28 08:57:00 |
Botao |
description |
On TI Panda 4430, 4460 and Samsung Arndale board with Linux Linaro ubuntu image:
http://snapshots.linaro.org/ubuntu/pre-built/panda/651/panda-trusty_developer_20140522-651.img.gz
SSH connection failed with "root" account.
Procedures:
root@linaro-developer:~# apt-get install ssh
root@linaro-developer:~# passwd
Type new password.
root@linaro-developer:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr ea:a7:8c:73:a9:e5
inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e8a7:8cff:fe73:a9e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2288 errors:0 dropped:0 overruns:0 frame:0
TX packets:3425 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1014872 (1.0 MB) TX bytes:3870579 (3.8 MB)
root@linaro-developer:~#
On host PC, run:
$ ssh root@192.168.1.7
The authenticity of host '192.168.1.7 (192.168.1.7)' can't be established.
ECDSA key fingerprint is cf:84:61:7e:5d:58:41:9d:74:79:ca:a0:2e:9c:9f:a2.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.7' (ECDSA) to the list of known hosts.
root@192.168.1.7's password:
Permission denied, please try again.
root@192.168.1.7's password:
The password typed is correct, but connection failed.
However, if using "linaro" account, everything just works well. |
On TI Panda 4430, 4460 and Samsung Arndale board with Linux Linaro ubuntu image:
http://snapshots.linaro.org/ubuntu/pre-built/panda/651/panda-trusty_developer_20140522-651.img.gz
SSH connection failed with "root" account.
Procedures:
root@linaro-developer:~# apt-get install ssh
root@linaro-developer:~# passwd
Type new password.
root@linaro-developer:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr ea:a7:8c:73:a9:e5
inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e8a7:8cff:fe73:a9e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2288 errors:0 dropped:0 overruns:0 frame:0
TX packets:3425 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1014872 (1.0 MB) TX bytes:3870579 (3.8 MB)
root@linaro-developer:~#
On host PC, run:
$ ssh root@192.168.1.7
The authenticity of host '192.168.1.7 (192.168.1.7)' can't be established.
ECDSA key fingerprint is cf:84:61:7e:5d:58:41:9d:74:79:ca:a0:2e:9c:9f:a2.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.7' (ECDSA) to the list of known hosts.
root@192.168.1.7's password:
Permission denied, please try again.
root@192.168.1.7's password:
The password typed is correct, but connection failed.
However, if using "linaro" account, everything just works well.
###########################################
This issue is observed on following images:
TI Panda:
http://snapshots.linaro.org/ubuntu/pre-built/panda/651/panda-trusty_developer_20140522-651.img.gz
Samsung Arndale:
http://snapshots.linaro.org/ubuntu/pre-built/arndale/654/arndale-trusty_server_20140525-654.img.gz |
|
| 2014-05-29 16:58:35 |
Milosz Wasilewski |
linaro-ubuntu: status |
New |
Invalid |
|
