root@localhost:/# reboot Broadcast message from root@localhost.localdomain (/dev/ttyAMA0) at 15:40 ... The system is going down for reboot NOW! root@localhost:/# [ 928.413665] Restarting system. Rebooting... Disabling debug USB. Switching off ATX PSU. Board powered down, rebooting... ARM V2M Firmware v3.1.1 Build Date: Aug 20 2012 Date: Wed 19 Jun 2013 Time: 15:40:27 Powering up system... Daughterboard fitted to site 1. Switching on ATXPSU... ATX3V3: ON VIOset: 1.8V MBtemp: 35 degC Configuring motherboard (rev D, var A)... IOFPGA config: PASSED MUXFPGA config: PASSED OSC CLK config: PASSED Testing SMC devices (FPGA build 8)... SRAM 32MB test: PASSED VRAM 8MB test: PASSED LAN9118 test: PASSED USB & OTG test: PASSED KMI1/KMI2 test: PASSED MMC & SD test: PASSED DVI image test: PASSED AACI AC97 test: PASSED CF card test: PASSED UART port test: PASSED MAC addrs test: PASSED Reading Site 1 Board File \SITE1\HBI0191B\board.txt DB1 JTAG configuration complete. Setting DB1 OSCCLKS... DB1.0 DCC 0 SPI configuration complete. Writing SCC 0x40610000 with 0xBB8A802A Writing SCC 0x40610001 with 0x10001F09 Writing SCC 0x40610002 with 0x00000000 DB1.0 DCC 0 SCC configuration complete. DB SMB clock enabled. Waiting for SITE1 CB_READY... Testing SMB clock... Configuring MUXFPGA for MB. Setting DVI mode for VGA. Releasing Daughterboard resets. Switching MCC log to UART1. Boot firmware (version built at 16:33:37 on Apr 18 2013) add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Sec/Sec/DEBUG/ArmPlatformSec.0 Trust Zone Configuration is disabled add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore/D0 add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Pei/PeiMain/DEBUG/PeiCore.C add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/PlatformPei/PlatformPeim/DEBU4 Loading PEIM at 0x000440AA804 EntryPoint=0x000440AA8F5 PlatformPei.efi Platform PEIM Loaded add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/MemoryInitPei/MemoryInitPeim/4 Loading PEIM at 0x000440B5BD4 EntryPoint=0x000440B5CC5 MemoryInit.efi Memory Init PEIM Loaded add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Pei/PeiMain/DEBUG/PeiCore.0 Loading PEIM at 0x0009FFDF150 EntryPoint=0x0009FFDF241 PeiCore.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/CpuPei/CpuPei/DEBUG/CpuPei.dl0 Loading PEIM at 0x0009FFD4150 EntryPoint=0x0009FFD4241 CpuPei.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/PCD/Pei/Pcd/DEBUG/Pcd0 Loading PEIM at 0x0009FFC9150 EntryPoint=0x0009FFC9241 PcdPeim.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/IntelFrameworkModulePkg/Universal/StatusCode0 Loading PEIM at 0x0009FFBF150 EntryPoint=0x0009FFBF241 StatusCodePei.efi PROGRESS CODE: V3020003 I0 add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Variable/Pei/Variable0 Loading PEIM at 0x0009FFB5150 EntryPoint=0x0009FFB5241 PeiVariable.efi PROGRESS CODE: V3020002 I0 PROGRESS CODE: V3020003 I0 add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/DxeIplPeim/DxeIpl/DEBUG/Dx0 Loading PEIM at 0x0009FFA6150 EntryPoint=0x0009FFA6241 DxeIpl.efi PROGRESS CODE: V3020002 I0 PROGRESS CODE: V3020003 I0 PROGRESS CODE: V3020002 I0 PROGRESS CODE: V3020003 I0 add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.0 Loading PEIM at 0x0009FA87000 EntryPoint=0x0009FA87241 DxeCore.efi PROGRESS CODE: V3021001 I0 Loading DXE CORE at 0x0009FA87000 EntryPoint=0x0009FA87241 add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.D HOBLIST address in DXE = 0x9F878010 Memory Allocation 0x00000004 0x9FFFF000 - 0x9FFFFFFF Memory Allocation 0x00000004 0x9FFF7000 - 0x9FFFEFFF Memory Allocation 0x00000004 0x9FA67000 - 0x9FA86FFF Memory Allocation 0x00000004 0x9FFDF000 - 0x9FFF6FFF Memory Allocation 0x00000004 0x9FFD4000 - 0x9FFDEFFF Memory Allocation 0x00000004 0x9FFC9000 - 0x9FFD3FFF Memory Allocation 0x00000004 0x9FFBF000 - 0x9FFC8FFF Memory Allocation 0x00000004 0x9FFB5000 - 0x9FFBEFFF Memory Allocation 0x00000004 0x9FFA6000 - 0x9FFB4FFF Memory Allocation 0x00000004 0x9FF96000 - 0x9FFA5FFF Memory Allocation 0x00000004 0x9FD24000 - 0x9FF95FFF Memory Allocation 0x00000004 0x9FAB2000 - 0x9FD23FFF Memory Allocation 0x00000004 0x9FA87000 - 0x9FAB1FFF Memory Allocation 0x00000003 0x9FA87000 - 0x9FAB1FFF Memory Allocation 0x00000004 0x9FA67000 - 0x9FA86FFF Memory Allocation 0x00000004 0x98000000 - 0x9801FFFF FV Hob 0x44080000 - 0x442FFFFF FV Hob 0x9FAB2000 - 0x9FD2283F FV2 Hob 0x9FAB2000 - 0x9FD2283F add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe0 Loading driver at 0x0009FA0D000 EntryPoint=0x0009FA0D26D ArmCpuDxe.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBU0 Loading driver at 0x0009FA25000 EntryPoint=0x0009FA2526D RuntimeDxe.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/SecurityStubDxe/Secur0 Loading driver at 0x0009FA01000 EntryPoint=0x0009FA0126D SecurityStubDxe.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashD0 Loading driver at 0x0009F9F3000 EntryPoint=0x0009F9F326D ArmVeNorFlashDxe.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Variable/RuntimeDxe/V0 Loading driver at 0x0009AA4A000 EntryPoint=0x0009AA4A26D VariableRuntimeDxe.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/FaultTolerantWriteDxe0 Loading driver at 0x0009F9E6000 EntryPoint=0x0009F9E626D FaultTolerantWriteDxe.efi Variable driver failed to add EFI_MEMORY_RUNTIME attribute to Flash. add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/0 Loading driver at 0x0009AA41000 EntryPoint=0x0009AA4126D Reset.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTime0 Loading driver at 0x0009AA34000 EntryPoint=0x0009AA3426D RealTimeClock.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/0 Loading driver at 0x0009F9DA000 EntryPoint=0x0009F9DA26D MetronomeDxe.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/SerialDxe/SerialDxe/DEBUG/Serial0 Loading driver at 0x0009F9D0000 EntryPoint=0x0009F9D026D SerialDxe.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDat0 Loading driver at 0x0009F9B3000 EntryPoint=0x0009F9B326D HiiDatabase.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP800 Loading driver at 0x0009F9A7000 EntryPoint=0x0009F9A726D SP805WatchdogDxe.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/Universal/MmcDxe/MmcDxe/DEBUG/Mm0 Loading driver at 0x0009F995000 EntryPoint=0x0009F99526D MmcDxe.efi add-symbol-file /mnt/ci_build/workspace/uefi/uefi/Build/ArmVExpress-CTA9x4/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciD0 Loading driver at 0x0009F987000 EntryPoint=0x0009F98726D PL180MciDxe.efi Card is SD2.0 => Supports high capacity High capacity card. - PrintOCR Ocr (0xC0FF8000) - Card operating voltage: 2.7 to 3.6 - AccessMode: Block Mode (0x2) - PowerUp - PrintCID - Manufacturing date: 11/11 - Product serial number: 0x20C42C54 - Product revision: 128 - OEM ID: DS - PrintRCA: 0xE6240520 The default boot selection will start in 10 seconds [1] uImage (local FDT) on SD card - VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x3F,0x41FC0)/uImage - Initrd: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x3F,0x41FC0)/uInitrd - Arguments: console=tty0 console=ttyAMA0,38400n8 root=/dev/mmcblk0p2 rootwait ro androidboot.console=ttyAMA0 mmci.fmax=12000000 - FDT: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x3F,0x41FC0)/v2p-ca9.dtb - LoaderType: Linux kernel with Local FDT ----------------------- Global FDT Config - VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/v2p-ca9.dtb ----------------------- [a] Boot Manager [b] Shell Start: 1 PEI 2182 ms DXE 7355 ms BDS 21459 ms Total Time = 30997 ms Starting the kernel: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.10.0-1-linaro-vexpress (buildd@alphard) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #1ubuntu1~ci+130611 [ 0.000000] Kernel was built at commit id '' [ 0.000000] CPU: ARMv7 Processor [410fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: ARM-Versatile Express, model: V2P-CA9 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x60000000-0x8f7fffff] [ 0.000000] HighMem [mem 0x8f800000-0x9fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x60000000-0x9fffffff] [ 0.000000] PERCPU: Embedded 9 pages/cpu @c111c000 s14080 r8192 d14592 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624 [ 0.000000] Kernel command line: console=tty0 console=ttyAMA0,38400n8 root=/dev/mmcblk0p2 rootwait ro androidboot.console=ttyAMA0 mmci.fma0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1024MB = 1024MB total [ 0.000000] Memory: 1028256k/1028256k available, 20320k reserved, 270336K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07f0430 (8098 kB) [ 0.000000] .init : 0xc07f1000 - 0xc085a700 ( 422 kB) [ 0.000000] .data : 0xc085c000 - 0xc08a0310 ( 273 kB) [ 0.000000] .bss : 0xc08a0310 - 0xc090f52c ( 445 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] smp_twd: clock not found -2 [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.002221] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) [ 0.089779] pid_max: default: 32768 minimum: 301 [ 0.090157] Security Framework initialized [ 0.090286] AppArmor: AppArmor initialized [ 0.090473] Mount-cache hash table entries: 512 [ 0.096970] CPU: Testing write buffer coherency: ok [ 0.097132] ftrace: allocating 21724 entries in 64 pages [ 0.173306] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.173378] Calibrating local timer... 199.73MHz. [ 0.229856] Setting up static identity map for 0xc05d6e88 - 0xc05d6ee0 [ 0.235809] CPU1: Booted secondary processor [ 0.269749] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.272087] CPU2: Booted secondary processor [ 0.309696] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.311936] CPU3: Booted secondary processor [ 0.349643] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.350081] Brought up 4 CPUs [ 0.350288] SMP: Total of 4 processors activated (3181.77 BogoMIPS). [ 0.350321] CPU: All CPU(s) started in SVC mode. [ 0.352871] devtmpfs: initialized [ 0.358983] sched: registering cpufreq notifiers for scale-invariant loads [ 0.360803] xor: measuring software checksum speed [ 0.459492] arm4regs : 708.400 MB/sec [ 0.559354] 8regs : 469.200 MB/sec [ 0.659223] 32regs : 360.000 MB/sec [ 0.659280] xor: using function: arm4regs (708.400 MB/sec) [ 0.663014] regulator-dummy: no parameters [ 0.665170] NET: Registered protocol family 16 [ 0.666770] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.671253] L310 cache controller enabled [ 0.671316] l2x0: 8 ways, CACHE_ID 0x410000c3, AUX_CTRL 0x3a460000, Cache size: 524288 B [ 0.693898] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.693970] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.694012] Serial: AMBA PL011 UART driver [ 0.694220] 10009000.uart: ttyAMA0 at MMIO 0x10009000 (irq = 37) is a PL011 rev2 [ 1.959550] console [ttyAMA0] enabled [ 1.971398] 1000a000.uart: ttyAMA1 at MMIO 0x1000a000 (irq = 38) is a PL011 rev2 [ 1.994335] 1000b000.uart: ttyAMA2 at MMIO 0x1000b000 (irq = 39) is a PL011 rev2 [ 2.017254] 1000c000.uart: ttyAMA3 at MMIO 0x1000c000 (irq = 40) is a PL011 rev2 [ 2.076289] bio: create slab at 0 [ 2.257309] raid6: int32x1 55 MB/s [ 2.437308] raid6: int32x2 76 MB/s [ 2.617326] raid6: int32x4 90 MB/s [ 2.796621] raid6: int32x8 102 MB/s [ 2.807875] raid6: using algorithm int32x8 (102 MB/s) [ 2.823031] raid6: using intx1 recovery algorithm [ 2.838195] 3V3: 3300 mV [ 2.847980] SCSI subsystem initialized [ 2.860655] usbcore: registered new interface driver usbfs [ 2.877459] usbcore: registered new interface driver hub [ 2.893813] usbcore: registered new device driver usb [ 2.911346] Advanced Linux Sound Architecture Driver Initialized. [ 2.931502] NetLabel: Initializing [ 2.941762] NetLabel: domain hash size = 128 [ 2.954845] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.969871] NetLabel: unlabeled traffic allowed by default [ 2.986900] Switching to clocksource arm,sp804 [ 3.000878] Could not create debugfs 'trace_clock' entry [ 3.016885] Could not create debugfs 'tracing_on' entry [ 3.056452] AppArmor: AppArmor Filesystem Enabled [ 3.101317] NET: Registered protocol family 2 [ 3.115522] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 3.136962] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 3.156581] TCP: Hash tables configured (established 8192 bind 8192) [ 3.175826] TCP: reno registered [ 3.185565] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 3.203420] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 3.222952] NET: Registered protocol family 1 [ 3.236733] RPC: Registered named UNIX socket transport module. [ 3.254564] RPC: Registered udp transport module. [ 3.268702] RPC: Registered tcp transport module. [ 3.282827] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.302526] Trying to unpack rootfs image as initramfs... [ 3.558750] Freeing initrd memory: 1832K (c7a12000 - c7bdc000) [ 3.577315] hw perfevents: enabled with (null) PMU driver, 0 counters available [ 3.602395] audit: initializing netlink socket (disabled) [ 3.618771] type=2000 audit(3.530:1): initialized [ 3.635503] bounce pool size: 64 pages [ 3.647221] VFS: Disk quotas dquot_6.5.2 [ 3.659227] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.680739] NFS: Registering the id_resolver key type [ 3.696034] Key type id_resolver registered [ 3.708601] Key type id_legacy registered [ 3.720706] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc. [ 3.743116] bio: create slab at 1 [ 3.756129] Btrfs loaded [ 3.763803] msgmni has been set to 1483 [ 3.777145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.799425] io scheduler noop registered [ 3.811214] io scheduler deadline registered [ 3.824101] io scheduler cfq registered (default) [ 3.838757] clcd-pl11x 10020000.clcd: PL111 rev1 at 0x10020000 [ 3.863839] clcd-pl11x 10020000.clcd: Device Tree CLCD PL111 hardware, XVGA display [ 3.970714] Console: switching to colour frame buffer device 128x48 [ 4.070373] VD10: at 992 mV [ 4.090371] VD10_S2: at 995 mV [ 4.110375] VD10_S3: at 979 mV [ 4.130355] VCC1V8: at 1791 mV [ 4.150351] DDR2VTT: at 899 mV [ 4.170353] VCC3V3: at 3316 mV [ 4.190352] VIO: at 1785 mV [ 4.419008] brd: module loaded [ 4.430977] mtdoops: mtd device (mtddev=name/number) must be supplied [ 4.451477] smsc911x: Driver version 2008-10-21 [ 4.465502] smsc911x 4e000000.ethernet (unregistered net_device): couldn't get clock -2 [ 4.503806] libphy: smsc911x-mdio: probed [ 4.516080] smsc911x 4e000000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=4e000000.etherne:01, irq=-1) [ 4.554510] smsc911x 4e000000.ethernet eth0: MAC Address: 00:02:f7:00:3c:ec [ 4.580811] nxp-isp1760 4f000000.usb: NXP ISP1760 USB Host Controller [ 4.604466] nxp-isp1760 4f000000.usb: new USB bus registered, assigned bus number 1 [ 4.831227] nxp-isp1760 4f000000.usb: bus width: 32, oc: digital [ 4.873576] nxp-isp1760 4f000000.usb: irq 48, io mem 0x4f000000 [ 4.895657] nxp-isp1760 4f000000.usb: USB ISP 1761 HW rev. 1 started [ 4.920456] hub 1-0:1.0: USB hub found [ 4.935971] hub 1-0:1.0: 1 port detected [ 4.952902] usbcore: registered new interface driver usb-storage [ 4.976738] mousedev: PS/2 mouse device common for all mice [ 4.999670] rtc-pl031 10017000.rtc: rtc core: registered pl031 as rtc0 [ 5.027600] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 5.057553] vexpress_big_little: vexpress_bL_init: No SPC found [ 5.079691] cpuidle: using governor ladder [ 5.096268] cpuidle: using governor menu [ 5.112370] bl_idle_init: No compatible node found [ 5.131723] mmci-pl18x 10005000.mmci: mmc0: PL180 manf 41 rev0 at 0x10005000 irq 41,42 (pio) [ 5.205384] ledtrig-cpu: registered to indicate activity on CPUs [ 5.220402] nxp-isp1760 4f000000.usb: port 1 high speed [ 5.239638] mmc0: new SDHC card at address e624 [ 5.240563] mmcblk0: mmc0:e624 SD04G 3.69 GiB [ 5.249546] mmcblk0: p1 p2 [ 5.280413] usb 1-1: new high-speed USB device number 2 using nxp-isp1760 [ 5.321464] usbcore: registered new interface driver usbhid [ 5.340372] nxp-isp1760 4f000000.usb: port 1 high speed [ 5.362669] usbhid: USB HID core driver [ 5.391968] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 43 [ 5.421378] aaci-pl041 10004000.aaci: FIFO 512 entries [ 5.422291] hub 1-1:1.0: USB hub found [ 5.422436] hub 1-1:1.0: 3 ports detected [ 5.474090] oprofile: no performance counters [ 5.492172] oprofile: using timer interrupt. [ 5.510043] TCP: cubic registered [ 5.524438] Initializing XFRM netlink socket [ 5.541870] NET: Registered protocol family 10 [ 5.560977] sit: IPv6 over IPv4 tunneling driver [ 5.581165] NET: Registered protocol family 17 [ 5.599141] NET: Registered protocol family 15 [ 5.617092] Key type dns_resolver registered [ 5.634630] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0 [ 5.662171] Registering SWP/SWPB emulation handler [ 5.683069] rtc-pl031 10017000.rtc: setting system clock to 2013-06-19 15:41:14 UTC (1371656474) [ 5.700460] usb 1-1.2: new high-speed USB device number 3 using nxp-isp1760 [ 5.739278] ALSA device list: [ 5.752528] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 43 [ 5.777490] Freeing unused kernel memory: 420K (c07f1000 - c085a000) [ 5.804036] hub 1-1.2:1.0: USB hub found [ 5.821540] hub 1-1.2:1.0: 4 ports detected Loading, please wait... [ 5.920582] usb 1-1.3: new low-speed USB device number 4 using nxp-isp1760 [ 5.944138] udevd[1080]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. [ 5.990523] atkbd serio0: keyboard reset failed on 10006000.kmi [ 6.078309] input: Logitech USB Keyboard as /devices/smb.15/motherboard.16/4f000000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input0 Begin: Mounting [ 6.119580] hid-generic 0003:046D:C31D.0001: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-4f000000.usb-1.30 root file system ... Begin: Running /scripts/local-top ... done. [ 6.193786] input: Logitech USB Keyboard as /devices/smb.15/motherboard.16/4f000000.usb/usb1/1-1/1-1.3/1-1.3:1.1/input/input1 [ 6.234347] hid-generic 0003:046D:C31D.0002: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-4f000000.usb-1.3/input1 [ 6.361590] usb 1-1.2.1: new high-speed USB device number 5 using nxp-isp1760 [ 6.507498] usb-storage 1-1.2.1:1.0: USB Mass Storage device detected [ 6.533727] scsi0 : usb-storage 1-1.2.1:1.0 [ 6.630903] usb 1-1.2.4: new low-speed USB device number 6 using nxp-isp1760 [ 6.761225] input: PixArt USB Optical Mouse as /devices/smb.15/motherboard.16/4f000000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/input/input2 [ 6.811883] hid-generic 0003:093A:2510.0003: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-4f000000.usb-1.2.4/input0 Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. [ 7.230580] atkbd serio1: keyboard reset failed on 10007000.kmi [ 7.395360] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 7.552226] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 9407 PQ: 0 ANSI: 0 [ 7.723542] sd 0:0:0:0: [sda] 15548416 512-byte logical blocks: (7.96 GB/7.41 GiB) [ 7.753323] sd 0:0:0:0: [sda] Write Protect is off [ 7.774719] sd 0:0:0:0: [sda] No Caching mode page present [ 7.796958] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.825772] sd 0:0:0:0: [sda] No Caching mode page present [ 7.848079] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.874847] sda: sda1 [ 7.891932] sd 0:0:0:0: [sda] No Caching mode page present [ 7.914319] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.938558] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 10.530817] init: ureadahead main process (1214) terminated with status 5 [ 12.627403] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 18.318225] aaci-pl041 10004000.aaci: timeout waiting for write to complete [ 18.346322] aaci-pl041 10004000.aaci: timeout waiting for write to complete [ 18.374793] aaci-pl041 10004000.aaci: timeout waiting for write to complete [ 18.402703] aaci-pl041 10004000.aaci: timeout waiting for write to complete [ 18.431330] aaci-pl041 10004000.aaci: timeout waiting for write to complete [ 18.459189] aaci-pl041 10004000.aaci: timeout waiting for write to complete [ 18.488031] aaci-pl041 10004000.aaci: timeout waiting for write to complete [ OK ]ting sensors limits * Loading cpufreq kernel modules... [ OK ] Last login: Wed Jun 19 15:38:11 UTC 2013 from noname-t420.bigpond on pts/0 Welcome to Linaro 13.05 (GNU/Linux 3.10.0-1-linaro-vexpress armv7l) * Documentation: https://wiki.linaro.org/ root@localhost:~#