On ARM Versatile Express A9 board with Linux Linaro image:
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer (/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
On ARM Versatile Express A9 board with Linux Linaro image:
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro- developer: ~# halt developer: ~# developer
(/dev/ ttyAMA0) at 2:28 ...
root@linaro-
Broadcast message from root@linaro-
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.