2012-12-07 02:31:14 |
Botao |
bug |
|
|
added bug |
2012-12-07 09:06:09 |
Fathi Boudra |
marked as duplicate |
|
966373 |
|
2012-12-10 07:42:54 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted. |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz |
|
2013-01-10 07:29:57 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz |
|
2013-01-15 11:37:09 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz |
|
2013-01-23 22:06:17 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz |
|
2013-01-30 07:01:32 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz |
|
2013-02-07 06:16:11 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz |
|
2013-02-13 13:47:06 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz |
|
2013-02-18 23:46:44 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz |
|
2013-02-27 13:10:04 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz |
|
2013-03-27 03:52:13 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz |
|
2013-04-04 13:03:44 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz |
|
2013-04-11 12:34:52 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz |
|
2013-04-17 00:09:39 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz |
|
2013-04-25 07:13:21 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz |
|
2013-05-08 13:27:24 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz |
|
2013-05-22 07:24:00 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz |
|
2013-05-27 12:25:47 |
Botao |
removed duplicate marker |
966373 |
|
|
2013-05-27 12:26:12 |
Botao |
attachment added |
|
vexpress_A9_Halt_Kernel_Panic_ubuntu_Raring_Build_344.txt https://bugs.launchpad.net/linaro-ubuntu/+bug/1087533/+attachment/3687852/+files/vexpress_A9_Halt_Kernel_Panic_ubuntu_Raring_Build_344.txt |
|
2013-05-27 12:26:26 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/344/vexpress-raring_developer_20130526-344.img.gz |
|
2013-05-27 12:26:49 |
Botao |
tags |
halt linaro-ubuntu linux-linaro qa-services |
halt linaro-ubuntu linux-linaro qa-services vexpress-a9 |
|
2013-06-19 15:45:35 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/344/vexpress-raring_developer_20130526-344.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/344/vexpress-raring_developer_20130526-344.img.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/370/vexpress-raring_developer_20130618-370.img.gz |
|
2013-06-25 03:13:00 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/344/vexpress-raring_developer_20130526-344.img.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/370/vexpress-raring_developer_20130618-370.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/344/vexpress-raring_developer_20130526-344.img.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/370/vexpress-raring_developer_20130618-370.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/376/vexpress-raring_developer_20130623-376.img.gz |
|
2013-06-26 03:07:08 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/344/vexpress-raring_developer_20130526-344.img.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/370/vexpress-raring_developer_20130618-370.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/376/vexpress-raring_developer_20130623-376.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/344/vexpress-raring_developer_20130526-344.img.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/370/vexpress-raring_developer_20130618-370.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/376/vexpress-raring_developer_20130623-376.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/379/vexpress-raring_developer_20130625-379.img.gz |
|
2013-07-24 05:35:40 |
Botao |
description |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/344/vexpress-raring_developer_20130526-344.img.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/370/vexpress-raring_developer_20130618-370.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/376/vexpress-raring_developer_20130623-376.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/379/vexpress-raring_developer_20130625-379.img.gz |
On ARM Versatile Express A9 board with Linux Linaro image:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
Halt test failed.
After run "halt" in serial console, only "[ 568.787526] System halted." shows at the end, system never shut down and monitor is still ON.
root@linaro-developer:~# halt
root@linaro-developer:~#
Broadcast message from root@linaro-developer
(/dev/ttyAMA0) at 2:28 ...
The system is going down for halt NOW!
[ OK ]ing all remaining processes to terminate...
[ OK ] processes ended within 1 seconds....
[ OK ]ctivating swap...
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now halt
[ 568.787526] System halted.
################################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/vexpress/6/vexpress-quantal_developer_20121206-6.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/9/vexpress-quantal_developer_20121209-9.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/41/vexpress-quantal_developer_20130107-41.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/44/vexpress-quantal_developer_20130114-44.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/51/vexpress-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/58/vexpress-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/68/vexpress-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/72/vexpress-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/249/vexpress-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/256/vexpress-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/276/vexpress-quantal_developer_20130324-276.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/280/vexpress-quantal_developer_20130401-280.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/286/vexpress-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/290/vexpress-quantal_developer_20130414-290.img.gz
http://snapshots.linaro.org/quantal/pre-built/vexpress/299/vexpress-quantal_developer_20130423-299.img.gz
http://snapshots.linaro.org/raring/hwpacks/vexpress/323/hwpack_linaro-vexpress_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/336/vexpress-raring_developer_20130520-336.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/344/vexpress-raring_developer_20130526-344.img.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/370/vexpress-raring_developer_20130618-370.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/376/vexpress-raring_developer_20130623-376.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/vexpress/379/vexpress-raring_developer_20130625-379.img.gz
http://snapshots.linaro.org/raring/pre-built/vexpress/408/vexpress-raring_developer_20130723-408.img.gz |
|
2014-08-26 05:14:46 |
Botao |
linaro-ubuntu: status |
New |
Invalid |
|