Welcome to minicom 2.5 OPTIONS: I18n Compiled on May 2 2011, 10:05:24. Port /dev/ttyUSB0 Press CTRL-A Z for help on special keys U-Boot SPL 2012.07 (Aug 27 2012 - 19:28:10) OMAP4430 ES2.2 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2012.07 (Aug 27 2012 - 19:28:10) CPU : OMAP4430 ES2.2 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt ** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 474 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 reading uImage 4627888 bytes read reading uInitrd 3405349 bytes read reading board.dtb 2018 bytes read ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4627824 Bytes = 4.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 3405285 Bytes = 3.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 815f0000 Booting using the fdt blob at 0x815f0000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 815f0000, end 815f37e1 Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.4.0-2-linaro-lt-omap (buildd@alfirk) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2~ci+120909065435-Ubuntu SMP PREEMPT Sun Sep 9 08:1 [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board, model: TI OMAP4 PandaBoard [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] cma: CMA: reserved 8 MiB at a8800000 [ 0.000000] cma: CMA: reserved 104 MiB at a9000000 [ 0.000000] cma: CMA: reserved 32 MiB at a6800000 [ 0.000000] cma: CMA: reserved 16 MiB at a5000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] omap2_set_globals_tap [ 0.000000] OMAP4: Map 0xa6600000 to 0xfe600000 for dram barrier [ 0.000000] omap2_set_globals_tap [ 0.000000] OMAP4430 ES2.2 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1940000 s12800 r8192 d15872 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584 [ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=61aa9593-5a3b-43fe-95c5-84d859607e9c rootwait ro earlyprintk fixrtc nocompcache vram=48MM [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 614MB 408MB = 1022MB total [ 0.000000] Memory: 806584k/806584k available, 241992k reserved, 270336K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc0714ff0 (7220 kB) [ 0.000000] .init : 0xc0715000 - 0xc0772200 ( 373 kB) [ 0.000000] .data : 0xc0774000 - 0xc0819ff0 ( 664 kB) [ 0.000000] .bss : 0xc081a014 - 0xc0dcd920 (5839 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:562 [ 0.000000] omap_sr_disable: omap_sr struct for sr_wakeup not found [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.064147] Calibrating delay loop... 1590.23 BogoMIPS (lpj=6213632) [ 0.098541] pid_max: default: 32768 minimum: 301 [ 0.104217] Security Framework initialized [ 0.108703] AppArmor: AppArmor initialized [ 0.113555] Mount-cache hash table entries: 512 [ 0.124908] CPU: Testing write buffer coherency: ok [ 0.130462] ftrace: allocating 29489 entries in 58 pages [ 0.192779] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.199127] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.207824] Setting up static identity map for 0x8046e078 - 0x8046e0c4 [ 0.214721] L310 cache controller enabled [ 0.218994] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.227630] omap_sar_ram_init [ 0.231018] generating sar_ram layout... [ 0.235351] sar ram layout created [ 0.317199] CPU1: Booted secondary processor [ 0.386627] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.386688] CPU1: Unknown IPI message 0x1 [ 0.387023] Brought up 2 CPUs [ 0.387023] SMP: Total of 2 processors activated (3188.82 BogoMIPS). [ 0.412994] devtmpfs: initialized [ 0.426788] EVM: security.selinux [ 0.430297] EVM: security.SMACK64 [ 0.433807] EVM: security.capability [ 0.439819] omap_sr_disable: omap_sr struct for sr_core not found [ 0.446228] omap_sr_disable: omap_sr struct for sr_core not found [ 0.452636] omap_sr_disable: omap_sr struct for sr_core not found [ 0.459045] omap_sr_disable: omap_sr struct for sr_core not found [ 0.465454] omap_sr_disable: omap_sr struct for sr_core not found [ 0.471832] omap_sr_disable: omap_sr struct for sr_core not found [ 0.478240] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.484558] omap_sr_disable: omap_sr struct for sr_core not found [ 0.490966] omap_sr_disable: omap_sr struct for sr_core not found [ 0.497375] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.503692] omap_sr_disable: omap_sr struct for sr_core not found [ 0.510101] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.517425] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.523742] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.530151] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.536499] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.542785] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.551818] omap_hwmod: mcpdm: _wait_target_ready error: -16 [ 0.557739] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.564025] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.569610] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.575927] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.582244] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.588531] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.596099] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.607666] dummy: [ 0.623565] NET: Registered protocol family 16 [ 0.648986] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.657043] GPMC revision 6.0 [ 0.666870] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.673767] OMAP GPIO hardware version 0.1 [ 0.678344] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.685363] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.692718] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.699829] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.707000] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.719329] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.727142] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.738830] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [ 0.746185] omap_hwmod_mux_init: Could not allocate device mux entry [ 0.762207] No ATAGs? [ 0.764404] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.773193] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.787597] Updated GPU clock source to be dpll_per_m7x2_ck [ 0.798858] omap-mcbsp.1: alias pad_fck already exists [ 0.805175] omap-mcbsp.2: alias pad_fck already exists [ 0.811218] omap-mcbsp.3: alias pad_fck already exists [ 0.817535] omap-mcbsp.4: alias pad_fck already exists [ 0.826110] OMAP DMA hardware revision 0.0 [ 0.831787] emif emif.1: Device configured with addr = f0e00000 and IRQ142 [ 0.839447] emif emif.2: Device configured with addr = f1000000 and IRQ143 [ 0.901123] bio: create slab at 0 [ 0.907958] vwl1271: 1800 mV [ 0.918365] SCSI subsystem initialized [ 0.924835] usbcore: registered new interface driver usbfs [ 0.931182] usbcore: registered new interface driver hub [ 0.937225] usbcore: registered new device driver usb [ 0.945861] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 0.954559] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.964630] twl 1-0048: PIH (irq 39) chaining IRQs 416..436 [ 0.972503] VUSB: 3300 mV normal standby [ 0.982177] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 0.990814] V1V8: 1800 mV normal standby [ 0.996063] V2V1: 2100 mV normal standby [ 1.001556] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 1.009185] VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 1.017028] VCXIO: 1800 mV normal standby [ 1.021392] VCXIO: supplied by V2V1 [ 1.027435] VDAC: 1800 mV normal standby [ 1.031616] VDAC: supplied by V2V1 [ 1.037170] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 1.045318] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 1.053619] CLK32KG: [ 1.057098] VANA: 2100 mV normal standby [ 1.062347] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 1.068847] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz [ 1.075775] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 1.082397] Linux media interface: v0.10 [ 1.089080] omap-iommu omap-iommu.0: dsp registered [ 1.094360] omap-iommu omap-iommu.1: ipu registered [ 1.100646] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 1.110443] NetLabel: Initializing [ 1.114074] NetLabel: domain hash size = 128 [ 1.118652] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.124176] NetLabel: unlabeled traffic allowed by default [ 1.132049] Switching to clocksource 32k_counter [ 1.198089] AppArmor: AppArmor Filesystem Enabled [ 1.244232] NET: Registered protocol family 2 [ 1.249664] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.259063] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.270843] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes) [ 1.297393] TCP: Hash tables configured (established 131072 bind 65536) [ 1.304870] TCP: reno registered [ 1.308319] UDP hash table entries: 512 (order: 3, 49152 bytes) [ 1.314910] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes) [ 1.322601] NET: Registered protocol family 1 [ 1.328613] RPC: Registered named UNIX socket transport module. [ 1.334838] RPC: Registered udp transport module. [ 1.339752] RPC: Registered tcp transport module. [ 1.344726] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.351715] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2 [ 1.360534] Trying to unpack rootfs image as initramfs... [ 1.666870] Freeing initrd memory: 3324K [ 1.715728] Registering 23 OPPs [ 1.721405] omap-rproc.1: alias fck already exists [ 1.728149] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.734649] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.741058] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.747619] omap_sr_disable: omap_sr struct for sr_iva not found [ 1.757019] audit: initializing netlink socket (disabled) [ 1.763000] type=2000 audit(1.750:1): initialized [ 1.958801] highmem bounce pool size: 64 pages [ 1.964355] VFS: Disk quotas dquot_6.5.2 [ 1.968780] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.979461] NFS: Registering the id_resolver key type [ 1.986022] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.993682] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc. [ 2.001770] fuse init (API version 7.18) [ 2.007690] Btrfs loaded [ 2.010406] msgmni has been set to 1373 [ 2.018218] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.026123] io scheduler noop registered [ 2.030303] io scheduler deadline registered [ 2.034912] io scheduler cfq registered (default) [ 2.042114] OMAP DSS rev 4.0 [ 2.323730] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.352966] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 2.361938] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 2.371063] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.378997] console [ttyO2] enabled, bootconsole disabled [ 2.378997] console [ttyO2] enabled, bootconsole disabled [ 2.391357] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 2.401641] [drm] Initialized drm 1.1.0 20060810 [ 2.428405] brd: module loaded [ 2.444732] loop: module loaded [ 2.448303] (stk) :sysfs entries created [ 2.453399] (stk) : debugfs entries created [ 2.472015] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.479492] tun: Universal TUN/TAP device driver, 1.6 [ 2.484924] tun: (C) 1999-2004 Max Krasnyansky [ 2.492431] PPP generic driver version 2.4.2 [ 2.498260] usbcore: registered new interface driver smsc95xx [ 2.505249] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.512573] ehci-omap.0 supply hsusb0 not found, using dummy regulator [ 2.519897] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.526580] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 2.536834] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 2.551391] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.558135] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.565399] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.573150] usb usb1: Product: OMAP-EHCI Host Controller [ 2.578857] usb usb1: Manufacturer: Linux 3.4.0-2-linaro-lt-omap ehci_hcd [ 2.586090] usb usb1: SerialNumber: ehci-omap.0 [ 2.594146] hub 1-0:1.0: USB hub found [ 2.598327] hub 1-0:1.0: 3 ports detected [ 2.629760] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.637054] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 2.643463] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 2.652587] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800 [ 2.735870] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.743103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.750854] usb usb2: Product: OMAP3 OHCI Host Controller [ 2.756622] usb usb2: Manufacturer: Linux 3.4.0-2-linaro-lt-omap ohci_hcd [ 2.763854] usb usb2: SerialNumber: ohci-omap3.0 [ 2.770385] hub 2-0:1.0: USB hub found [ 2.774414] hub 2-0:1.0: 3 ports detected [ 2.780670] Initializing USB Mass Storage driver... [ 2.786346] usbcore: registered new interface driver usb-storage [ 2.792724] USB Mass Storage support registered. [ 2.798950] mousedev: PS/2 mouse device common for all mice [ 2.809417] twl_rtc twl_rtc: Power up reset detected. [ 2.816009] twl_rtc twl_rtc: Enabling TWL-RTC [ 2.826080] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 2.833251] i2c /dev entries driver [ 2.841217] device-mapper: uevent: version 1.0.3 [ 2.847015] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.856445] sdhci: Secure Digital Host Controller Interface driver [ 2.863006] sdhci: Copyright(c) Pierre Ossman [ 2.871398] omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator [ 2.882324] omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator [ 2.894317] thermal_governor_dev_register:Adding omap_ondie_governor governor [ 2.902099] thermal_get_slope:Getting slope is not supported for domain cpu [ 2.909515] thermal_get_offset:Getting offset is not supported for domain cpu [ 2.917236] thermal_governor_dev_register:Adding omap_ongpu_governor governor [ 2.924865] thermal_get_slope:Getting slope is not supported for domain gpu [ 2.932312] thermal_get_offset:Getting offset is not supported for domain gpu [ 2.932403] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.947418] RMH: STM: 956: stm_arm_init [ 2.951965] RMH: STM device init [ 2.955444] RMH: STM: 808: stm_device_setup [ 2.960296] RMH: STM: 815: stm_probe: base_addr=0x5415a000 regs=0xf00d2000 [ 2.967651] RMH: STM: 823: stm_device_setup: probing device [ 2.973663] RMH: STM: 826: DEVTYPE = 0x0 [ 2.977874] RMH: STM: 836: PID=0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 [ 2.984161] RMH: STM: 843: CID=0x0 0x0 0x0 0x0 [ 2.988983] RMH: STM device init'd [ 2.992889] stm_fw: vendor driver stm_arm registered [ 3.008850] omap_pcm_dummy() init [ 3.013702] OMAP4/5 SoC init [ 3.016784] omap_pcm_dummy() init [ 3.020355] omap_mcpdm_dummy() init [ 3.027404] aess aess: ABE Firmware version 9560 [ 3.035064] omap_sr_disable: omap_sr struct for sr_iva not found [ 3.064666] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.074371] mmc0: new SDHC card at address e624 [ 3.082336] omap_sr_disable: omap_sr struct for sr_iva not found [ 3.088897] mmcblk0: mmc0:e624 SD04G 3.69 GiB [ 3.103698] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok [ 3.110992] mmcblk0: p1 p2 [ 3.111022] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.111022] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.114166] hub 1-1:1.0: USB hub found [ 3.114379] hub 1-1:1.0: 5 ports detected [ 3.138671] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok [ 3.155548] asoc: snd-soc-dummy-dai <-> Voice mapping ok [ 3.164184] asoc: snd-soc-dummy-dai <-> Tones mapping ok [ 3.172088] asoc: snd-soc-dummy-dai <-> Vibra mapping ok [ 3.178680] asoc: snd-soc-dummy-dai <-> MODEM mapping ok [ 3.185150] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok [ 3.192230] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 3.202056] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok [ 3.210662] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok [ 3.216827] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok [ 3.222595] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok [ 3.228485] asoc: twl6040-vib <-> mcpdm-vib mapping ok [ 3.234374] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok [ 3.241394] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok [ 3.248107] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 3.254913] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 3.263885] input: PandaBoard Headset Jack as /devices/platform/omap-abe-twl6040/sound/card0/input0 [ 3.273986] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 3.297210] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.305480] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok [ 3.313873] mmc1: new SDIO card at address 0001 [ 3.323852] oprofile: using arm/armv7-ca9 [ 3.328979] TCP: cubic registered [ 3.332519] Initializing XFRM netlink socket [ 3.337707] NET: Registered protocol family 10 [ 3.345092] NET: Registered protocol family 17 [ 3.349914] NET: Registered protocol family 15 [ 3.355865] Registering the dns_resolver key type [ 3.361206] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 3.369506] ThumbEE CPU extension supported. [ 3.374145] Registering SWP/SWPB emulation handler [ 3.391387] Power Management for TI OMAP4XX/OMAP5XXX devices. [ 3.397918] hwmod gpmc not found [ 3.401458] sr_init: No PMIC hook to init smartreflex [ 3.407135] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 3.407348] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.407714] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.408050] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.408905] SmartReflex class 1.5 driver: initialized (86400000ms) [ 3.433471] clock: disabling unused clocks to save power [ 3.434387] do_calibrate: mpu: Calibration complete: Voltage Nominal=1313000Calib=1228060 margin=0 [ 3.434448] do_calibrate: iva: Calibration complete: Voltage Nominal=1188000Calib=1076140 margin=0 [ 3.434539] do_calibrate: core: Calibration complete: Voltage Nominal=1200000Calib=1088800 margin=0 [ 3.436798] registered taskstats version 1 [ 3.470092] VANA: incomplete constraints, leaving on [ 3.471313] VDAC: incomplete constraints, leaving on [ 3.472137] VUSB: incomplete constraints, leaving on [ 3.500274] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.518066] dmm dmm: initialized all PAT entries [ 3.630004] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.637512] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.649169] smsc95xx v1.0.4 [ 3.686248] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled [ 3.715545] do_calibrate: mpu: Calibration complete: Voltage Nominal=1200000Calib=1139440 margin=0 [ 3.736785] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 2a:40:02:d2:3b:0a [ 3.785766] omapdss DISPC error: timeout waiting for digit out to stop [ 3.832946] usb 1-1.2: new low-speed USB device number 4 using ehci-omap [ 3.848846] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled [ 3.849304] [drm] Enabling DMM ywrap scrolling [ 3.918853] Console: switching to colour frame buffer device 160x45 [ 3.948760] fb0: omapdrm frame buffer device [ 3.953521] drm: registered panic notifier [ 3.958221] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.965637] [drm] No driver support for vblank timestamp query. [ 3.972259] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 3.980621] ALSA device list: [ 3.984039] usb 1-1.2: New USB device found, idVendor=093a, idProduct=2510 [ 3.984039] #0: PandaBoard [ 3.984069] #1: OMAPHDMI [ 3.998107] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.006988] Freeing init memory: 372K [ 4.006988] Write protecting the kernel text section c0008000 - c06d8000 [ 4.043792] usb 1-1.2: Product: USB Optical Mouse [ 4.057556] usb 1-1.2: Manufacturer: PixArt Loading, please wait... [ 4.161041] usb 1-1.3: new high-speed USB device number 5 using ehci-omap [ 4.199096] udevd[1345]: starting version 175 Begin: Loading essential drivers ... [ 4.303436] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608 [ 4.340270] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.480590] usb 1-1.3: Product: USB2.0 Hub done. [ 4.550689] hub 1-1.3:1.0: USB hub found [ 4.567413] hub 1-1.3:1.0: 4 ports detected Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... [ 4.629608] do_calibrate: mpu: Calibration complete: Voltage Nominal=1375000Calib=1291360 margin=0 Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 4.934783] usb 1-1.3.4: new low-speed USB device number 6 using ehci-omap [ 5.091613] usb 1-1.3.4: New USB device found, idVendor=0a81, idProduct=0101 [ 5.105346] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.122344] usb 1-1.3.4: Product: USB Keyboard [ 5.133178] usb 1-1.3.4: Manufacturer: CHESEN [ 5.270263] input: PixArt USB Optical Mouse as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1 [ 5.293609] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-1.2/input0 [ 5.319274] input: CHESEN USB Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.0/input/input2 [ 5.346740] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-ehci-omap.0-1.3.4/input0 [ 5.376007] input: CHESEN USB Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.1/input/input3 [ 5.403717] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-ehci-omap.0-1.3.4/input1 [ 5.422790] usbcore: registered new interface driver usbhid [ 5.434478] usbhid: USB HID core driver done. [ 5.913208] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 6.489044] do_calibrate: mpu: Calibration complete: Voltage Nominal=1025000Calib=962200 margin=0 [ 7.298980] init: ureadahead main process (1475) terminated with status 5 fsck from util-linux 2.20.1 rootfs: Superblock last write time is in the future. (by less than a day, probably due to the hardware clock being incorrectly set). FIXED. rootfs: clean, 141996/193536 files, 467746/773120 blocks modem-manager[1848]: ModemManager (version 0.5.2.0) starting... [ 13.574768] (stk) :response timeout during fw download [ 13.580413] (stk) :download firmware failed * Starting bluetooth daemon[ OK ] * Starting Bridge socket events into upstart[ OK ] modem-manager[1848]: Loaded plugin Sierra modem-manager[1848]: Loaded plugin Huawei modem-manager[1848]: Loaded plugin Wavecom modem-manager[1848]: Loaded plugin Ericsson MBM * Starting mDNS/DNS-SD daemon[ OK ] * Starting system logging daemon[ OK ] modem-manager[1848]: Loaded plugin Nokia modem-manager[1848]: Loaded plugin Option modem-manager[1848]: Loaded plugin Samsung modem-manager[1848]: Loaded plugin Linktop modem-manager[1848]: Loaded plugin Gobi modem-manager[1848]: Loaded plugin ZTE modem-manager[1848]: Loaded plugin Generic modem-manager[1848]: Loaded plugin SimTech modem-manager[1848]: Loaded plugin X22X * Stopping cold plug devices[ OK ] modem-manager[1848]: Loaded plugin Longcheer modem-manager[1848]: Loaded plugin MotoC modem-manager[1848]: Loaded plugin Novatel * Stopping log initial device creation[ OK ] * Starting configure network device security[ OK ] * Starting save udev log and update rules[ OK ] modem-manager[1848]: Loaded plugin Option High-Speed * Starting configure virtual network devices[ OK ] modem-manager[1848]: Loaded plugin AnyData * Stopping configure virtual network devices[ OK ] * Starting network connection manager[ OK ] * Stopping save udev log and update rules[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; edit /etc/default/saned * Stopping System V initialisation compatibility[ OK ] * Starting CUPS printing spooler/server[ OK ] * Starting System V runlevel compatibility[ OK ] * Starting automatic crash report generation[ OK ] * Starting LightDM Display Manager[ OK ] * Starting save kernel messages[ OK ] * Starting anac(h)ronistic cron[ OK ] * Starting regular background program processing daemon[ OK ] * Stopping System PulseAudio sound server[ OK ] * Starting crash report submission daemon[ OK ] * Stopping System V runlevel compatibility[ OK ] Welcome to Linaro 12.08 (GNU/Linux 3.4.0-2-linaro-lt-omap armv7l) * Documentation: https://wiki.linaro.org/ The programs included with the Linaro system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Linaro comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. [ 17.939117] [ 17.940734] ============================================= [ 17.946441] [ INFO: possible recursive locking detected ] [ 17.952148] 3.4.0-2-linaro-lt-omap #2~ci+120909065435-Ubuntu Tainted: G O [ 17.960296] --------------------------------------------- [ 17.966033] Xorg/2048 is trying to acquire lock: [ 17.970916] (psPVRSRVMutex){+.+.+.}, at: [] LinuxLockMutex+0xe/0x10 [omapdrm_pvr] [ 17.980224] [ 17.980255] but task is already holding lock: [ 17.986419] (psPVRSRVMutex){+.+.+.}, at: [] LinuxLockMutex+0xe/0x10 [omapdrm_pvr] [ 17.995391] [ 17.995391] other info that might help us debug this: [ 18.002288] Possible unsafe locking scenario: [ 18.002288] [ 18.008544] CPU0 [ 18.011138] ---- [ 18.013702] lock(psPVRSRVMutex); [ 18.017333] lock(psPVRSRVMutex); [ 18.020935] [ 18.020935] *** DEADLOCK *** [ 18.020935] [ 18.027191] May be due to missing lock nesting notation [ 18.027191] [ 18.034362] 2 locks held by Xorg/2048: [ 18.038330] #0: (drm_global_mutex){+.+.+.}, at: [] drm_release+0x21/0x288 [ 18.046661] #1: (psPVRSRVMutex){+.+.+.}, at: [] LinuxLockMutex+0xe/0x10 [omapdrm_pvr] [ 18.056121] [ 18.056121] stack backtrace: [ 18.060760] [] (unwind_backtrace+0x1/0x90) from [] (print_deadlock_bug+0x81/0xac) [ 18.070526] [] (print_deadlock_bug+0x81/0xac) from [] (validate_chain.isra.26+0x341/0x360) [ 18.081115] [] (validate_chain.isra.26+0x341/0x360) from [] (__lock_acquire+0x4d5/0x54e) [ 18.091491] [] (__lock_acquire+0x4d5/0x54e) from [] (lock_acquire+0xbb/0xd8) [ 18.100799] [] (lock_acquire+0xbb/0xd8) from [] (mutex_lock_nested+0x37/0x250) [ 18.110321] [] (mutex_lock_nested+0x37/0x250) from [] (LinuxLockMutex+0xe/0x10 [omapdrm_pvr]) [ 18.121215] [] (LinuxLockMutex+0xe/0x10 [omapdrm_pvr]) from [] (LinuxMMapPerProcessDisconnect+0x16/0x4e [omapdrm_pvr]) [ 18.134368] [] (LinuxMMapPerProcessDisconnect+0x16/0x4e [omapdrm_pvr]) from [] (OSPerProcessPrivateDataDeInit+0x10/0x26 [omapdrm_pvr]) [ 18.149017] [] (OSPerProcessPrivateDataDeInit+0x10/0x26 [omapdrm_pvr]) from [] (PVRSRVDissociateMemFromResmanKM+0x58/0x76 [omapdrm_pvr]) [ 18.163848] [] (PVRSRVDissociateMemFromResmanKM+0x58/0x76 [omapdrm_pvr]) from [] (PVRSRVPerProcessDataDisconnect+0x2a/0x3c [omapdrm_pvr]) [ 18.178771] [] (PVRSRVPerProcessDataDisconnect+0x2a/0x3c [omapdrm_pvr]) from [] (PVRSRVProcessDisconnect+0xc/0xe [omapdrm_pvr]) [ 18.192779] [] (PVRSRVProcessDisconnect+0xc/0xe [omapdrm_pvr]) from [] (PVRSRVRelease+0x5c/0x8c [omapdrm_pvr]) [ 18.205230] [] (PVRSRVRelease+0x5c/0x8c [omapdrm_pvr]) from [] (PVRSRVDrmRelease+0x1a/0x2c [omapdrm_pvr]) [ 18.217224] [] (PVRSRVDrmRelease+0x1a/0x2c [omapdrm_pvr]) from [] (dev_preclose+0x2b/0x54) [ 18.227813] [] (dev_preclose+0x2b/0x54) from [] (drm_release+0x41/0x288) [ 18.236755] [] (drm_release+0x41/0x288) from [] (__fput+0x97/0x154) [ 18.245208] [] (__fput+0x97/0x154) from [] (filp_close+0x41/0x48) [ 18.253509] [] (filp_close+0x41/0x48) from [] (sys_close+0x87/0xc4) [ 18.261993] [] (sys_close+0x87/0xc4) from [] (ret_fast_syscall+0x1/0x52) [ 18.373016] rproc remoteproc1: remote processor ipu_c0 is now up [ 18.393554] virtio_rpmsg_bus virtio1: rpmsg host is online [ 18.402526] rproc remoteproc1: registered virtio1 (type 7) [ 18.606811] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.614837] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 18.849273] omapdce: module is from the staging directory, the quality is unknown, you have been warned. [ 18.859466] omap-rproc omap-rproc.1: received echo reply from ipu_c0 [ 18.866699] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32 [ 18.876678] virtio_rpmsg_bus virtio1: creating channel rpmsg-dce addr 0x2a [ 18.889831] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33 root@linaro-ubuntu-desktop:~# [ 27.471252] omap_hwmod: aess: _wait_target_disable failed [ 27.483001] omap_hwmod: aess: _wait_target_disable failed [ 27.492767] omap_hwmod: aess: _wait_target_disable failed [ 27.502746] omap_hwmod: aess: _wait_target_disable failed [ 27.511322] omap_hwmod: aess: _wait_target_disable failed [ 27.519989] omap_hwmod: aess: _wait_target_disable failed [ 27.528594] omap_hwmod: aess: _wait_target_disable failed [ 27.537170] omap_hwmod: aess: _wait_target_disable failed [ 27.545745] omap_hwmod: aess: _wait_target_disable failed [ 27.554840] omap_hwmod: aess: _wait_target_disable failed [ 27.564208] omap_hwmod: aess: _wait_target_disable failed [ 27.573455] omap_hwmod: aess: _wait_target_disable failed [ 27.582305] omap_hwmod: aess: _wait_target_disable failed [ 27.591156] omap_hwmod: aess: _wait_target_disable failed [ 27.602783] omap_hwmod: aess: _wait_target_disable failed [ 27.612579] omap_hwmod: aess: _wait_target_disable failed [ 27.621612] omap_hwmod: aess: _wait_target_disable failed [ 27.630157] omap_hwmod: aess: _wait_target_disable failed [ 27.638702] omap_hwmod: aess: _wait_target_disable failed [ 27.647277] omap_hwmod: aess: _wait_target_disable failed [ 27.655853] omap_hwmod: aess: _wait_target_disable failed [ 27.664459] omap_hwmod: aess: _wait_target_disable failed [ 27.673034] omap_hwmod: aess: _wait_target_disable failed [ 27.682159] omap_hwmod: aess: _wait_target_disable failed [ 27.691162] omap_hwmod: aess: _wait_target_disable failed [ 27.699768] omap_hwmod: aess: _wait_target_disable failed [ 27.708343] omap_hwmod: aess: _wait_target_disable failed [ 27.747009] omap_hwmod: aess: _wait_target_disable failed [ 27.757751] omap_hwmod: aess: _wait_target_disable failed [ 27.767395] omap_hwmod: aess: _wait_target_disable failed [ 27.776428] omap_hwmod: aess: _wait_target_disable failed [ 27.785003] omap_hwmod: aess: _wait_target_disable failed [ 27.796264] omap_hwmod: aess: _wait_target_disable failed [ 27.804870] omap_hwmod: aess: _wait_target_disable failed [ 27.813446] omap_hwmod: aess: _wait_target_disable failed [ 27.822052] omap_hwmod: aess: _wait_target_disable failed [ 27.835327] omap_hwmod: aess: _wait_target_disable failed [ 27.844482] omap_hwmod: aess: _wait_target_disable failed [ 27.853454] omap_hwmod: aess: _wait_target_disable failed [ 27.862030] omap_hwmod: aess: _wait_target_disable failed [ 27.870605] omap_hwmod: aess: _wait_target_disable failed [ 27.881011] omap_hwmod: aess: _wait_target_disable failed [ 27.890563] omap_hwmod: aess: _wait_target_disable failed [ 27.899566] omap_hwmod: aess: _wait_target_disable failed [ 27.908203] omap_hwmod: aess: _wait_target_disable failed [ 27.916778] omap_hwmod: aess: _wait_target_disable failed [ 27.925415] omap_hwmod: aess: _wait_target_disable failed [ 27.934082] omap_hwmod: aess: _wait_target_disable failed [ 27.947875] omap_hwmod: aess: _wait_target_disable failed [ 27.958862] omap_hwmod: aess: _wait_target_disable failed [ 27.968139] omap_hwmod: aess: _wait_target_disable failed [ 27.982177] omap_hwmod: aess: _wait_target_disable failed [ 27.991302] omap_hwmod: aess: _wait_target_disable failed [ 28.000396] omap_hwmod: aess: _wait_target_disable failed [ 29.043518] eth0: no IPv6 routers present [ 33.501953] omap_hwmod: aess: _wait_target_disable failed [ 41.848724] warning: process `colord' used the deprecated sysctl system call with 8.1.2. root@linaro-ubuntu-desktop:~# uname -a Linux linaro-ubuntu-desktop 3.4.0-2-linaro-lt-omap #2~ci+120909065435-Ubuntu SMP PREEMPT Sun Sep 9 08:33:41 UTC 201 armv7l armv7l armv7l GNU/Linux root@linaro-ubuntu-desktop:~# dmesg | grep gcc [ 0.000000] Linux version 3.4.0-2-linaro-lt-omap (buildd@alfirk) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2~ci+120909065435-Ubuntu SMP PREEMPT Sun Sep 9 08:1 root@linaro-ubuntu-desktop:~#