Welcome to minicom 2.5 OPTIONS: I18n Compiled on May 2 2011, 10:05:24. Port /dev/ttyUSB0 Press CTRL-A Z for help on special keys U-Boot SPL 2012.04.01 (Jul 26 2012 - 22:53:19) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2012.04.01 (Jul 26 2012 - 22:53:19) CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt ** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 474 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 reading uImage 4621528 bytes read reading uInitrd 3405261 bytes read reading board.dtb 2018 bytes read ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4621464 Bytes = 4.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 3405197 Bytes = 3.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 815f0000 Booting using the fdt blob at 0x815f0000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 815f0000, end 815f37e1 Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.4.0-2-linaro-lt-omap (buildd@mizar) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubunt0 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board, model: TI OMAP4 PandaBoard [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] cma: CMA: reserved 8 MiB at a8800000 [ 0.000000] cma: CMA: reserved 104 MiB at a9000000 [ 0.000000] cma: CMA: reserved 32 MiB at a6800000 [ 0.000000] cma: CMA: reserved 16 MiB at a5000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] omap2_set_globals_tap [ 0.000000] OMAP4: Map 0xa6600000 to 0xfe600000 for dram barrier [ 0.000000] omap2_set_globals_tap [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c15da000 s12800 r8192 d15872 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584 [ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=39395601-2c41-450e-b87f-3254d0M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 614MB 408MB = 1022MB total [ 0.000000] Memory: 806612k/806612k available, 241964k reserved, 270336K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc0711e60 (7208 kB) [ 0.000000] .init : 0xc0712000 - 0xc076f200 ( 373 kB) [ 0.000000] .data : 0xc0770000 - 0xc08132f0 ( 653 kB) [ 0.000000] .bss : 0xc0813314 - 0xc0dc69a0 (5838 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:562 [ 0.000000] omap_sr_disable: omap_sr struct for sr_wakeup not found [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.064208] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488) [ 0.098571] pid_max: default: 32768 minimum: 301 [ 0.104156] Security Framework initialized [ 0.108612] AppArmor: AppArmor initialized [ 0.113433] Mount-cache hash table entries: 512 [ 0.124725] CPU: Testing write buffer coherency: ok [ 0.130218] ftrace: allocating 29456 entries in 58 pages [ 0.192474] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.198760] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.207427] Setting up static identity map for 0x8046cb78 - 0x8046cbc4 [ 0.214294] L310 cache controller enabled [ 0.218566] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.227203] omap_sar_ram_init [ 0.230621] generating sar_ram layout... [ 0.234924] sar ram layout created [ 0.316711] CPU1: Booted secondary processor [ 0.386260] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.386352] CPU1: Unknown IPI message 0x1 [ 0.386718] Brought up 2 CPUs [ 0.386718] SMP: Total of 2 processors activated (2792.83 BogoMIPS). [ 0.412872] devtmpfs: initialized [ 0.427642] EVM: security.selinux [ 0.431152] EVM: security.SMACK64 [ 0.434661] EVM: security.capability [ 0.440887] omap_sr_disable: omap_sr struct for sr_core not found [ 0.447326] omap_sr_disable: omap_sr struct for sr_core not found [ 0.453735] omap_sr_disable: omap_sr struct for sr_core not found [ 0.460174] omap_sr_disable: omap_sr struct for sr_core not found [ 0.466583] omap_sr_disable: omap_sr struct for sr_core not found [ 0.472991] omap_sr_disable: omap_sr struct for sr_core not found [ 0.479400] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.485717] omap_sr_disable: omap_sr struct for sr_core not found [ 0.492126] omap_sr_disable: omap_sr struct for sr_core not found [ 0.498565] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.504882] omap_sr_disable: omap_sr struct for sr_core not found [ 0.511322] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.534637] omap_hwmod: ipu: failed to hardreset [ 0.539611] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.545928] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.552398] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.558715] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.565032] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.574096] omap_hwmod: mcpdm: _wait_target_ready error: -16 [ 0.580017] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.586334] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.591949] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.598266] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.604583] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.610900] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.618499] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.630554] dummy: [ 0.642822] NET: Registered protocol family 16 [ 0.664459] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.672271] GPMC revision 6.0 [ 0.682800] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.689758] OMAP GPIO hardware version 0.1 [ 0.694305] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.701812] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.708923] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.716125] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.723480] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.736206] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.744171] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.756317] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [ 0.763641] omap_hwmod_mux_init: Could not allocate device mux entry [ 0.780181] No ATAGs? [ 0.782379] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.791259] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.806579] Updated GPU clock source to be dpll_per_m7x2_ck [ 0.818664] omap-mcbsp.1: alias pad_fck already exists [ 0.824798] omap-mcbsp.2: alias pad_fck already exists [ 0.830810] omap-mcbsp.3: alias pad_fck already exists [ 0.836853] omap-mcbsp.4: alias pad_fck already exists [ 0.843261] omap4plus_scm.0: alias fck already exists [ 0.851409] OMAP DMA hardware revision 0.0 [ 0.857269] emif emif.1: Device configured with addr = f0e00000 and IRQ142 [ 0.864868] emif emif.2: Device configured with addr = f1000000 and IRQ143 [ 0.933105] bio: create slab at 0 [ 0.940185] vwl1271: 1800 mV [ 0.950256] SCSI subsystem initialized [ 0.957122] usbcore: registered new interface driver usbfs [ 0.963500] usbcore: registered new interface driver hub [ 0.969543] usbcore: registered new device driver usb [ 0.977905] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 0.986968] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.998199] twl 1-0048: PIH (irq 39) chaining IRQs 416..436 [ 1.006164] VUSB: 3300 mV normal standby [ 1.015869] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 1.024963] V1V8: 1800 mV normal standby [ 1.030456] V2V1: 2100 mV normal standby [ 1.036071] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 1.043823] VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 1.051757] VCXIO: 1800 mV normal standby [ 1.056030] VCXIO: supplied by V2V1 [ 1.062316] VDAC: 1800 mV normal standby [ 1.066528] VDAC: supplied by V2V1 [ 1.072143] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 1.080596] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 1.088989] CLK32KG: [ 1.092712] VANA: 2100 mV normal standby [ 1.097930] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 1.104370] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz [ 1.111480] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 1.118316] Linux media interface: v0.10 [ 1.125335] omap-iommu omap-iommu.0: dsp registered [ 1.130645] omap-iommu omap-iommu.1: ipu registered [ 1.137115] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 1.147186] NetLabel: Initializing [ 1.150787] NetLabel: domain hash size = 128 [ 1.155456] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.160949] NetLabel: unlabeled traffic allowed by default [ 1.168945] Switching to clocksource 32k_counter [ 1.240631] AppArmor: AppArmor Filesystem Enabled [ 1.291137] NET: Registered protocol family 2 [ 1.296417] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.306701] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.317413] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes) [ 1.349975] TCP: Hash tables configured (established 131072 bind 65536) [ 1.357086] TCP: reno registered [ 1.360534] UDP hash table entries: 512 (order: 3, 49152 bytes) [ 1.367156] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes) [ 1.374999] NET: Registered protocol family 1 [ 1.381469] RPC: Registered named UNIX socket transport module. [ 1.387695] RPC: Registered udp transport module. [ 1.392639] RPC: Registered tcp transport module. [ 1.397613] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.404541] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2 [ 1.413421] Trying to unpack rootfs image as initramfs... [ 1.749603] Freeing initrd memory: 3324K [ 2.056945] Registering 23 OPPs [ 2.064453] omap_sr_disable: omap_sr struct for sr_iva not found [ 2.070953] omap_sr_disable: omap_sr struct for sr_iva not found [ 2.077392] omap_sr_disable: omap_sr struct for sr_iva not found [ 2.083862] omap_sr_disable: omap_sr struct for sr_iva not found [ 2.093658] audit: initializing netlink socket (disabled) [ 2.099578] type=2000 audit(2.078:1): initialized [ 2.320251] highmem bounce pool size: 64 pages [ 2.325897] VFS: Disk quotas dquot_6.5.2 [ 2.330291] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.341400] NFS: Registering the id_resolver key type [ 2.348052] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.355377] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc. [ 2.363555] fuse init (API version 7.18) [ 2.369598] Btrfs loaded [ 2.372344] msgmni has been set to 1373 [ 2.380523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.388458] io scheduler noop registered [ 2.392608] io scheduler deadline registered [ 2.397247] io scheduler cfq registered (default) [ 2.404541] OMAP DSS rev 4.0 [ 2.716735] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.748168] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 2.757965] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 2.767242] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.775207] console [ttyO2] enabled, bootconsole disabled [ 2.775207] console [ttyO2] enabled, bootconsole disabled [ 2.787719] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 2.797760] [drm] Initialized drm 1.1.0 20060810 [ 2.826995] brd: module loaded [ 2.844665] loop: module loaded [ 2.848907] (stk) :sysfs entries created [ 2.853149] (stk) : debugfs entries created [ 2.873596] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.881103] tun: Universal TUN/TAP device driver, 1.6 [ 2.886505] tun: (C) 1999-2004 Max Krasnyansky [ 2.894073] PPP generic driver version 2.4.2 [ 2.899932] usbcore: registered new interface driver smsc95xx [ 2.906951] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.914245] ehci-omap.0 supply hsusb0 not found, using dummy regulator [ 2.921600] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.928405] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 2.937927] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 2.955505] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.962402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.969665] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.977355] usb usb1: Product: OMAP-EHCI Host Controller [ 2.983032] usb usb1: Manufacturer: Linux 3.4.0-2-linaro-lt-omap ehci_hcd [ 2.990264] usb usb1: SerialNumber: ehci-omap.0 [ 2.998535] hub 1-0:1.0: USB hub found [ 3.002716] hub 1-0:1.0: 3 ports detected [ 3.041717] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.049011] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 3.055419] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 3.064270] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800 [ 3.147735] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.154968] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.162689] usb usb2: Product: OMAP3 OHCI Host Controller [ 3.168426] usb usb2: Manufacturer: Linux 3.4.0-2-linaro-lt-omap ohci_hcd [ 3.175659] usb usb2: SerialNumber: ohci-omap3.0 [ 3.182312] hub 2-0:1.0: USB hub found [ 3.186340] hub 2-0:1.0: 3 ports detected [ 3.192810] Initializing USB Mass Storage driver... [ 3.198455] usbcore: registered new interface driver usb-storage [ 3.204833] USB Mass Storage support registered. [ 3.211608] mousedev: PS/2 mouse device common for all mice [ 3.222106] twl_rtc twl_rtc: Power up reset detected. [ 3.228729] twl_rtc twl_rtc: Enabling TWL-RTC [ 3.238800] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 3.246124] i2c /dev entries driver [ 3.255462] device-mapper: uevent: version 1.0.3 [ 3.261383] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.270965] sdhci: Secure Digital Host Controller Interface driver [ 3.277587] sdhci: Copyright(c) Pierre Ossman [ 3.286041] omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator [ 3.296936] omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator [ 3.309295] thermal_governor_dev_register:Adding omap_ongpu_governor governor [ 3.316955] thermal_get_slope:Getting slope is not supported for domain gpu [ 3.324401] thermal_get_offset:Getting offset is not supported for domain gpu [ 3.332092] RMH: STM: 956: stm_arm_init [ 3.332092] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 3.343688] RMH: STM device init [ 3.347167] RMH: STM: 808: stm_device_setup [ 3.351623] RMH: STM: 815: stm_probe: base_addr=0x5415a000 regs=0xf00d2000 [ 3.359588] RMH: STM: 823: stm_device_setup: probing device [ 3.365631] RMH: STM: 826: DEVTYPE = 0x0 [ 3.369842] RMH: STM: 836: PID=0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 [ 3.376068] RMH: STM: 843: CID=0x0 0x0 0x0 0x0 [ 3.381011] RMH: STM device init'd [ 3.384979] stm_fw: vendor driver stm_arm registered [ 3.399536] omap_pcm_dummy() init [ 3.404296] OMAP4/5 SoC init [ 3.407348] omap_pcm_dummy() init [ 3.410980] omap_mcpdm_dummy() init [ 3.418426] aess aess: ABE Firmware version 9560 [ 3.426513] omap_sr_disable: omap_sr struct for sr_iva not found [ 3.464477] omap_sr_disable: omap_sr struct for sr_iva not found [ 3.478668] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok [ 3.482696] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.482818] mmc0: new SDHC card at address e624 [ 3.485107] mmcblk0: mmc0:e624 SD04G 3.69 GiB [ 3.493713] mmcblk0: p1 p2 [ 3.508270] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok [ 3.517974] asoc: snd-soc-dummy-dai <-> Voice mapping ok [ 3.524536] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.533966] asoc: snd-soc-dummy-dai <-> Tones mapping ok [ 3.539703] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.549255] asoc: snd-soc-dummy-dai <-> Vibra mapping ok [ 3.556976] asoc: snd-soc-dummy-dai <-> MODEM mapping ok [ 3.563415] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok [ 3.570434] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 3.570465] hub 1-1:1.0: USB hub found [ 3.570770] hub 1-1:1.0: 5 ports detected [ 3.588836] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok [ 3.596313] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok [ 3.602203] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok [ 3.608032] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok [ 3.613983] asoc: twl6040-vib <-> mcpdm-vib mapping ok [ 3.616485] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 3.627868] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.629699] mmc1: new SDIO card at address 0001 [ 3.640136] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok [ 3.646850] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok [ 3.653625] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 3.660400] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 3.669586] input: PandaBoardES Headset Jack as /devices/platform/omap-abe-twl6040/sound/card0/input0 [ 3.694854] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok [ 3.705291] oprofile: using arm/armv7-ca9 [ 3.710357] TCP: cubic registered [ 3.713958] Initializing XFRM netlink socket [ 3.719024] NET: Registered protocol family 10 [ 3.726562] NET: Registered protocol family 17 [ 3.731414] NET: Registered protocol family 15 [ 3.737579] Registering the dns_resolver key type [ 3.742919] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 3.751281] ThumbEE CPU extension supported. [ 3.755889] Registering SWP/SWPB emulation handler [ 3.774475] Power Management for TI OMAP4XX/OMAP5XXX devices. [ 3.780731] hwmod gpmc not found [ 3.784454] sr_init: No PMIC hook to init smartreflex [ 3.790130] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.798828] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.807586] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.816558] SmartReflex Class3 initialized [ 3.846679] clock: disabling unused clocks to save power [ 3.854156] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 3.862243] registered taskstats version 1 [ 3.902191] VANA: incomplete constraints, leaving on [ 3.909301] VDAC: incomplete constraints, leaving on [ 3.915802] VUSB: incomplete constraints, leaving on [ 3.923461] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.940612] dmm dmm: initialized all PAT entries [ 3.979705] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled [ 3.990814] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.998748] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.010955] smsc95xx v1.0.4 [ 4.088775] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled [ 4.102020] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 01 [ 4.134643] [drm] Enabling DMM ywrap scrolling [ 4.182617] Console: switching to colour frame buffer device 160x45 [ 4.197753] usb 1-1.2: new low-speed USB device number 4 using ehci-omap [ 4.212646] fb0: omapdrm frame buffer device [ 4.217376] drm: registered panic notifier [ 4.222015] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.229278] [drm] No driver support for vblank timestamp query. [ 4.235748] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 4.243316] ALSA device list: [ 4.246582] #0: PandaBoardES [ 4.249908] #1: OMAPHDMI [ 4.256744] Freeing init memory: 372K [ 4.266174] Write protecting the kernel text section c0008000 - c06d5000 Loading, please wait... [ 4.339782] usb 1-1.2: New USB device found, idVendor=0a81, idProduct=0101 [ 4.353210] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.367187] usb 1-1.2: Product: USB Keyboard [ 4.377410] usb 1-1.2: Manufacturer: CHESEN [ 4.439147] udevd[1350]: starting version 175 Begin: Loading essential drivers ... [ 4.471405] usb 1-1.3: new high-speed USB device number 5 using ehci-omap done. [ 4.623565] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608 Begin: Running /scripts/init-premount ... done. [ 4.659698] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Begin: Mounting root file system ... [ 4.707702] usb 1-1.3: Product: USB2.0 Hub Begin: Running /scripts/local-top ... done. [ 4.789489] hub 1-1.3:1.0: USB hub found [ 4.803924] hub 1-1.3:1.0: 4 ports detected Begin: Running /scripts/local-premount ... [ 5.104248] usb 1-1.3.1: new low-speed USB device number 6 using ehp [ 5.257019] usb 1-1.3.1: New USB device found, idVendor=093a, idProduct=2510 [ 5.286590] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.299346] usb 1-1.3.1: Product: USB Optical Mouse [ 5.307678] usb 1-1.3.1: Manufacturer: PixArt done. [ 5.343597] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 5.357910] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 5.420135] input: CHESEN USB Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.0/in1 [ 5.442108] generic-usb 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on us0 [ 5.469329] input: CHESEN USB Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.1/in2 [ 5.486389] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-1 [ 5.509155] input: PixArt USB Optical Mouse as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3.13 [ 5.529144] generic-usb 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on 0 [ 5.546691] usbcore: registered new interface driver usbhid [ 5.556365] usbhid: USB HID core driver [ 6.122161] EXT4-fs (mmcblk0p2): recovery complete [ 6.138702] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 7.174652] init: ureadahead main process (1485) terminated with status 5 fsck from util-linux 2.20.1 rootfs: clean, 141958/193536 files, 463689/773120 blocks * Starting mDNS/DNS-SD daemon[ OK ] * Starting configure network device[ OK ] * Stopping Failsafe Boot Delay[ OK ] * Starting System V initialisation compatibility[ OK ] * Starting modem connection manager[ OK ] * Starting configure network device security[ OK ] * Starting Bridge socket events into upstart[ OK ] * Starting network connection manager[ OK ] * Starting configure network device security[ OK ] * Starting configure network device[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher saned disabled; * Stopping cold plug devices[ OK ] * Stopping System V initialisation compatibility[ OK ] * Starting automatic crash report generation[ OK ] * Starting LightDM Display Manager[ OK ] * Starting anac(h)ronistic cron[ OK ] * Starting save kernel messages[ OK ] * Stopping log initial device creation[ OK ] * Starting CUPS printing spooler/server[ OK ] * Starting regular background program processing daemon[ OK ] * Starting configure network device security[ OK ] * Starting configure virtual network devices[ OK ] * Starting crash report submission daemon[ OK ] * Starting save udev log and update rules[ OK ] * Stopping System PulseAudio sound server[ OK ] * Stopping configure virtual network devices[ OK ] * Stopping save udev log and update rules[ OK ] * Stopping save kernel messages[ OK ] Welcome to Linaro 12.08 (development branch) (GNU/Linux 3.4.0-2-linaro-lt-omap armv7l) * Documentation: https://wiki.linaro.org/ The programs included with the Linaro system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Linaro comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. [ 17.568206] [ 17.569854] ============================================= [ 17.575653] [ INFO: possible recursive locking detected ] [ 17.581451] 3.4.0-2-linaro-lt-omap #2~ci+120723064619-Ubuntu Tainted: G C O [ 17.589660] --------------------------------------------- [ 17.595489] Xorg/2100 is trying to acquire lock: [ 17.600433] (psPVRSRVMutex){+.+.+.}, at: [] LinuxLockMutex+0xe/0x10 [omapdrm_pvr] [ 17.609741] [ 17.609741] but task is already holding lock: [ 17.616027] (psPVRSRVMutex){+.+.+.}, at: [] LinuxLockMutex+0xe/0x10 [omapdrm_pvr] [ 17.625274] [ 17.625274] other info that might help us debug this: [ 17.632324] Possible unsafe locking scenario: [ 17.632324] [ 17.638732] CPU0 [ 17.641357] ---- [ 17.644012] lock(psPVRSRVMutex); [ 17.647705] lock(psPVRSRVMutex); [ 17.651367] [ 17.651397] *** DEADLOCK *** [ 17.651397] [ 17.657775] May be due to missing lock nesting notation [ 17.657806] [ 17.665100] 2 locks held by Xorg/2100: [ 17.669158] #0: (drm_global_mutex){+.+.+.}, at: [] drm_release+0x21/0x288 [ 17.677764] #1: (psPVRSRVMutex){+.+.+.}, at: [] LinuxLockMutex+0xe/0x10 [omapdrm_pvr] [ 17.687469] [ 17.687499] stack backtrace: [ 17.692260] [] (unwind_backtrace+0x1/0x90) from [] (print_deadlock_bug+0x81/0xac) [ 17.702209] [] (print_deadlock_bug+0x81/0xac) from [] (validate_chain.isra.26+0x341/0x360) [ 17.712982] [] (validate_chain.isra.26+0x341/0x360) from [] (__lock_acquire+0x4d5/0x54e) [ 17.723571] [] (__lock_acquire+0x4d5/0x54e) from [] (lock_acquire+0xbb/0xd8) [ 17.733093] [] (lock_acquire+0xbb/0xd8) from [] (mutex_lock_nested+0x37/0x250) [ 17.742828] [] (mutex_lock_nested+0x37/0x250) from [] (LinuxLockMutex+0xe/0x10 [omapdrm_pv) [ 17.753906] [] (LinuxLockMutex+0xe/0x10 [omapdrm_pvr]) from [] (LinuxMMapPerProcessDisconn) [ 17.767425] [] (LinuxMMapPerProcessDisconnect+0x16/0x4e [omapdrm_pvr]) from [] (OSPerProce) [ 17.782409] [] (OSPerProcessPrivateDataDeInit+0x10/0x26 [omapdrm_pvr]) from [] (PVRSRVDiss) [ 17.797546] [] (PVRSRVDissociateMemFromResmanKM+0x58/0x76 [omapdrm_pvr]) from [] (PVRSRVPe) [ 17.812805] [] (PVRSRVPerProcessDataDisconnect+0x2a/0x3c [omapdrm_pvr]) from [] (PVRSRVPro) [ 17.827087] [] (PVRSRVProcessDisconnect+0xc/0xe [omapdrm_pvr]) from [] (PVRSRVRelease+0x5c) [ 17.839813] [] (PVRSRVRelease+0x5c/0x8c [omapdrm_pvr]) from [] (PVRSRVDrmRelease+0x1a/0x2c) [ 17.852020] [] (PVRSRVDrmRelease+0x1a/0x2c [omapdrm_pvr]) from [] (dev_preclose+0x2b/0x54) [ 17.862823] [] (dev_preclose+0x2b/0x54) from [] (drm_release+0x41/0x288) [ 17.871917] [] (drm_release+0x41/0x288) from [] (__fput+0x97/0x154) [ 17.880523] [] (__fput+0x97/0x154) from [] (filp_close+0x41/0x48) [ 17.888977] [] (filp_close+0x41/0x48) from [] (sys_close+0x87/0xc4) [ 17.897613] [] (sys_close+0x87/0xc4) from [] (ret_fast_syscall+0x1/0x52) root@linaro-ubuntu-desktop:~# [ 28.052642] eth0: no IPv6 routers present [ 38.646240] warning: process `colord' used the deprecated sysctl system call with 8.1.2. [ 45.694641] omap-rproc omap-rproc.1: received echo reply from ipu_c0 [ 45.702514] virtio_rpmsg_bus virtio1: creating channel rpmsg-dce addr 0x2a [ 45.710906] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32 [ 45.738403] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33 root@linaro-ubuntu-desktop:~# uname -a Linux linaro-ubuntu-desktop 3.4.0-2-linaro-lt-omap #2~ci+120723064619-Ubuntu SMP PREEMPT Mon Jul 23 10:40:52 UTC x root@linaro-ubuntu-desktop:~# gcc --version gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. root@linaro-ubuntu-desktop:~#