[ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.3.1-37-linaro-lt-ux500 (buildd@diphda) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37~lt~ci~20120524012446+1337874072~4fbea4f1-Ubuntu SMP PREEMPT (Ubuntu 3.3.1-37.37~lt~ci~20120524012446+1337874072~4fbea4f1-linaro-lt-ux500 3.3.1) [ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: ST-Ericsson Snowball platform [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] DB8500 v2.2 [0x008500b2] [ 0.000000] On node 0 totalpages: 202240 [ 0.000000] free_area_init_node: node 0, pgdat c0a72840, node_mem_map c1223000 [ 0.000000] Normal zone: 1416 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 119928 pages, LIFO batch:31 [ 0.000000] HighMem zone: 632 pages used for memmap [ 0.000000] HighMem zone: 80264 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1a2c000 s12736 r8192 d15936 u36864 [ 0.000000] pcpu-alloc: s12736 r8192 d15936 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 200192 [ 0.000000] Kernel command line: console=tty0 console=ttyAMA2,115200n8 root=UUID=5f1f188d-9ebf-444f-941d-564d591df2c9 rootwait ro earlyprintk fixrtc nocompcache vmalloc=300M mem=128M@0 mali.mali_mem=64M@128M hwmem=168M@192M mem=22M@360M mem_issw=1M@383M mem=640M@384M [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 128MB 22MB 640MB = 790MB total [ 0.000000] Memory: 784340k/784340k available, 24620k reserved, 323584K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xec800000 - 0xff000000 ( 296 MB) [ 0.000000] lowmem : 0xc0000000 - 0xec400000 ( 708 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc099f7a8 (9822 kB) [ 0.000000] .init : 0xc09a0000 - 0xc09f91c0 ( 357 kB) [ 0.000000] .data : 0xc09fa000 - 0xc0a875e8 ( 566 kB) [ 0.000000] .bss : 0xc0a8760c - 0xc0f34f00 (4791 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:640 [ 0.000000] PRCMU firmware: U8500, version 3.4.9 [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.149963] Calibrating delay using timer specific routine.. 4.80 BogoMIPS (lpj=24032) [ 0.150054] pid_max: default: 32768 minimum: 301 [ 0.150360] Security Framework initialized [ 0.150482] AppArmor: AppArmor initialized [ 0.150512] Yama: becoming mindful. [ 0.150726] Mount-cache hash table entries: 512 [ 0.151916] Initializing cgroup subsys cpuacct [ 0.152038] CPU: Testing write buffer coherency: ok [ 0.152130] ftrace: allocating 26041 entries in 77 pages [ 0.212219] CPU0: thread -1, cpu 0, socket 3, mpidr 80000300 [ 0.212432] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.212615] Setting up static identity map for 0x6ae2d0 - 0x6ae328 [ 0.212677] L310 cache controller enabled [ 0.212707] l2x0: 8 ways, CACHE_ID 0x410000c5, AUX_CTRL 0x7ec60800, Cache size: 524288 B [ 0.313110] CPU1: Booted secondary processor [ 0.313140] CPU1: thread -1, cpu 1, socket 3, mpidr 80000301 [ 0.313171] Brought up 2 CPUs [ 0.313232] SMP: Total of 2 processors activated (9.61 BogoMIPS). [ 0.313995] devtmpfs: initialized [ 0.319580] print_constraints: dummy: [ 0.320037] NET: Registered protocol family 16 [ 0.320312] Trying to unpack rootfs image as initramfs... [ 0.449493] Freeing initrd memory: 2184K [ 0.452484] gpiochip_add: registered GPIOs 0 to 31 on device: GPIO-0-31 [ 0.452758] gpio gpio.0: at address f812e000 [ 0.453369] gpiochip_add: registered GPIOs 32 to 36 on device: GPIO-32-63 [ 0.453460] gpio gpio.1: at address f812e080 [ 0.453857] gpiochip_add: registered GPIOs 64 to 95 on device: GPIO-64-95 [ 0.454132] gpio gpio.2: at address f800e000 [ 0.454528] gpiochip_add: registered GPIOs 96 to 97 on device: GPIO-96-127 [ 0.454589] gpio gpio.3: at address f800e080 [ 0.454986] gpiochip_add: registered GPIOs 128 to 159 on device: GPIO-128-159 [ 0.455261] gpio gpio.4: at address f800e100 [ 0.455657] gpiochip_add: registered GPIOs 160 to 171 on device: GPIO-160-191 [ 0.455780] gpio gpio.5: at address f800e180 [ 0.456176] gpiochip_add: registered GPIOs 192 to 223 on device: GPIO-192-223 [ 0.456451] gpio gpio.6: at address f811e000 [ 0.456848] gpiochip_add: registered GPIOs 224 to 230 on device: GPIO-224-255 [ 0.456939] gpio gpio.7: at address f811e080 [ 0.457336] gpiochip_add: registered GPIOs 256 to 267 on device: GPIO-256-288 [ 0.457489] gpio gpio.8: at address fa3fe000 [ 0.463134] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.463195] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.463287] dbx500_dump: driver initialized [ 0.465148] print_constraints: db8500-vape: [ 0.465270] regulator regulator.1: regulator-db8500-vape-probed [ 0.465454] print_constraints: db8500-varm: [ 0.465515] regulator regulator.2: regulator-db8500-varm-probed [ 0.465698] print_constraints: db8500-vmodem: [ 0.465759] regulator regulator.3: regulator-db8500-vmodem-probed [ 0.465942] print_constraints: db8500-vpll: [ 0.466003] regulator regulator.4: regulator-db8500-vpll-probed [ 0.466217] print_constraints: db8500-vsmps1: [ 0.466278] regulator regulator.5: regulator-db8500-vsmps1-probed [ 0.466461] print_constraints: db8500-vsmps2: [ 0.466522] regulator regulator.6: regulator-db8500-vsmps2-probed [ 0.466705] print_constraints: db8500-vsmps3: [ 0.466766] regulator regulator.7: regulator-db8500-vsmps3-probed [ 0.466949] print_constraints: db8500-vrf1: [ 0.467010] regulator regulator.8: regulator-db8500-vrf1-probed [ 0.467193] print_constraints: db8500-sva-mmdsp: [ 0.467254] regulator regulator.9: regulator-db8500-sva-mmdsp-probed [ 0.467437] print_constraints: db8500-sva-mmdsp-ret: [ 0.467498] regulator regulator.10: regulator-db8500-sva-mmdsp-ret-probed [ 0.467681] print_constraints: db8500-sva-pipe: [ 0.467742] regulator regulator.11: regulator-db8500-sva-pipe-probed [ 0.467956] print_constraints: db8500-sia-mmdsp: [ 0.468017] regulator regulator.12: regulator-db8500-sia-mmdsp-probed [ 0.468200] print_constraints: db8500-sia-mmdsp-ret: [ 0.468261] regulator regulator.13: regulator-db8500-sia-mmdsp-ret-probed [ 0.468444] print_constraints: db8500-sia-pipe: [ 0.468505] regulator regulator.14: regulator-db8500-sia-pipe-probed [ 0.468688] print_constraints: db8500-sga: [ 0.468750] set_supply: db8500-sga: supplied by db8500-vape [ 0.468841] regulator regulator.15: regulator-db8500-sga-probed [ 0.469024] print_constraints: db8500-b2r2-mcde: [ 0.469055] set_supply: db8500-b2r2-mcde: supplied by db8500-vape [ 0.469177] regulator regulator.16: regulator-db8500-b2r2-mcde-probed [ 0.469360] print_constraints: db8500-esram12: [ 0.469421] regulator regulator.17: regulator-db8500-esram12-probed [ 0.469635] print_constraints: db8500-esram12-ret: [ 0.469665] regulator regulator.18: regulator-db8500-esram12-ret-probed [ 0.469879] print_constraints: db8500-esram34: [ 0.469940] regulator regulator.19: regulator-db8500-esram34-probed [ 0.470123] print_constraints: db8500-esram34-ret: [ 0.470184] regulator regulator.20: regulator-db8500-esram34-ret-probed [ 0.470428] DB8500 PRCMU initialized [ 0.470703] ab8500-i2c ab8500-i2c.0: detected chip, revision: 0x30 [ 0.470764] ab8500-i2c ab8500-i2c.0: switch off status: 0x4 [ 0.473327] gpiochip_add: registered GPIOs 312 to 353 on device: ab8500_gpio [ 0.501129] bio: create slab at 0 [ 0.502044] dma40 dma40.0: managed by runtime pm: regulator [ 0.502166] dma40 dma40.0: hardware revision: 3 @ 0x801c0000 [ 0.502227] dma40 dma40.0: 6 of 8 physical DMA channels available [ 0.502258] dma40 dma40.0: [d40_phy_res_init] INFO: channel 4 is misconfigured (0) [ 0.502288] dma40 dma40.0: [d40_phy_res_init] INFO: channel 5 is misconfigured (0) [ 0.502319] dma40 dma40.0: [d40_phy_res_init] INFO: channel 6 is misconfigured (0) [ 0.512786] dma40 dma40.0: initialized [ 0.513580] print_constraints: EN-3V3: 3300 mV [ 0.513671] reg-fixed-voltage reg-fixed-voltage.1: EN-3V3 supplying 3300000uV [ 0.514068] print_constraints: WLAN-VBAT: 3600 mV [ 0.514129] reg-fixed-voltage reg-fixed-voltage.0: WLAN-VBAT supplying 3600000uV [ 0.515716] ab8500-regulator ab8500-regulator.0: Board profile is 0x32 [ 0.517181] regulator regulator.23: VEXTSUPPLY1-enable (bank, reg, mask, value): 0x04, 0x08, 0x03, 0x03 [ 0.517181] print_constraints: ab8500-ext-supply1: 1800 mV [ 0.517303] regulator regulator.23: VEXTSUPPLY1-probed [ 0.517486] print_constraints: ab8500-ext-supply2: 1360 mV [ 0.517547] regulator regulator.24: VEXTSUPPLY2-probed [ 0.517791] regulator regulator.25: VEXTSUPPLY3-enable (bank, reg, mask, value): 0x04, 0x08, 0x30, 0x10 [ 0.517822] print_constraints: ab8500-ext-supply3: 3400 mV [ 0.517913] regulator regulator.25: VEXTSUPPLY3-probed [ 0.518188] print_constraints: V-DISPLAY: 2800 <--> 3300 mV at 2800 mV [ 0.518280] set_supply: V-DISPLAY: supplied by ab8500-ext-supply3 [ 0.518402] regulator regulator.25: VEXTSUPPLY3-is_enabled (bank, reg, mask, value): 0x04, 0x08, 0x30, 0x13 [ 0.518707] print_constraints: V-eMMC1: 1100 <--> 3300 mV at 2900 mV normal idle [ 0.518798] set_supply: V-eMMC1: supplied by ab8500-ext-supply3 [ 0.519134] machine_constraints_voltage: V-MMC-SD: override min_uV, 1100000 -> 1200000 [ 0.519134] machine_constraints_voltage: V-MMC-SD: override max_uV, 3300000 -> 2910000 [ 0.519195] print_constraints: V-MMC-SD: 1200 <--> 2910 mV at 2910 mV normal idle [ 0.519256] set_supply: V-MMC-SD: supplied by ab8500-ext-supply3 [ 0.519622] print_constraints: V-INTCORE: 1250 <--> 1350 mV at 1250 mV normal idle [ 0.519927] machine_constraints_voltage: V-TVOUT: override min_uV, 1 -> 2000000 [ 0.519927] machine_constraints_voltage: V-TVOUT: override max_uV, 2147483647 -> 2000000 [ 0.519958] print_constraints: V-TVOUT: 2000 mV [ 0.520233] machine_constraints_voltage: V-AUD: override min_uV, 1 -> 2000000 [ 0.520233] machine_constraints_voltage: V-AUD: override max_uV, 2147483647 -> 2000000 [ 0.520263] print_constraints: V-AUD: 2000 mV [ 0.520507] machine_constraints_voltage: V-AMIC1: override min_uV, 1 -> 2050000 [ 0.520507] machine_constraints_voltage: V-AMIC1: override max_uV, 2147483647 -> 2050000 [ 0.520507] print_constraints: V-AMIC1: 2050 mV [ 0.520751] machine_constraints_voltage: V-AMIC2: override min_uV, 1 -> 2050000 [ 0.520782] machine_constraints_voltage: V-AMIC2: override max_uV, 2147483647 -> 2050000 [ 0.520782] print_constraints: V-AMIC2: 2050 mV [ 0.521026] machine_constraints_voltage: V-DMIC: override min_uV, 1 -> 1800000 [ 0.521057] machine_constraints_voltage: V-DMIC: override max_uV, 2147483647 -> 1800000 [ 0.521057] print_constraints: V-DMIC: 1800 mV [ 0.521301] machine_constraints_voltage: V-CSI-DSI: override min_uV, 1 -> 1200000 [ 0.521331] machine_constraints_voltage: V-CSI-DSI: override max_uV, 2147483647 -> 1200000 [ 0.521331] print_constraints: V-CSI-DSI: 1200 mV [ 0.521606] machine_constraints_voltage: V-SYSCLKREQ-2: override max_uV, 2147483647 -> 1 [ 0.521606] print_constraints: V-SYSCLKREQ-2: 0 mV [ 0.521850] machine_constraints_voltage: V-SYSCLKREQ-4: override max_uV, 2147483647 -> 1 [ 0.521881] print_constraints: V-SYSCLKREQ-4: 0 mV [ 0.522125] Serial: AMBA PL011 UART driver [ 0.522369] uart0: ttyAMA0 at MMIO 0x80120000 (irq = 43) is a PL011 rev3 [ 0.522918] uart1: ttyAMA1 at MMIO 0x80121000 (irq = 51) is a PL011 rev3 [ 0.523437] uart2: ttyAMA2 at MMIO 0x80007000 (irq = 58) is a PL011 rev3 [ 1.281158] console [ttyAMA2] enabled [ 1.286193] hwmem hwmem.0: Probed OK [ 1.292114] SCSI subsystem initialized [ 1.295959] ssp-pl022 ssp0: managed by runtime pm: regulator [ 1.301818] ssp-pl022 ssp0: ARM PL022 driver, device ID: 0x01080022 [ 1.308166] pl022: mapped registers from 0x80002000 to ec822000 [ 1.314086] ssp-pl022 ssp0: Unbalanced pm_runtime_enable! [ 1.319610] ssp-pl022 ssp0: setup for DMA on RX dma0chan0, TX dma0chan1 [ 1.327575] usbcore: registered new interface driver usbfs [ 1.333221] usbcore: registered new interface driver hub [ 1.338775] usbcore: registered new device driver usb [ 1.343963] ab8500-usb ab8500-usb.0: managed by runtime pm: pins [ 1.350982] ab8500-usb ab8500-usb.0: revision 0x30 driver initialized [ 1.359100] nmk-i2c nmk-i2c.0: managed by runtime pm: pins [ 1.364898] nmk-i2c nmk-i2c.0: initialize Nomadik I2C0 at 80004000 on virtual base ec824000 [ 1.373718] nmk-i2c nmk-i2c.1: managed by runtime pm: pins [ 1.379455] nmk-i2c nmk-i2c.1: initialize Nomadik I2C1 at 80122000 on virtual base ec826000 [ 1.388061] nmk-i2c nmk-i2c.2: managed by runtime pm: pins [ 1.393737] nmk-i2c nmk-i2c.2: initialize Nomadik I2C2 at 80128000 on virtual base ec828000 [ 1.402343] nmk-i2c nmk-i2c.3: managed by runtime pm: pins [ 1.408081] nmk-i2c nmk-i2c.3: initialize Nomadik I2C3 at 80110000 on virtual base ec82a000 [ 1.418182] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 1.425567] Bluetooth: Core ver 2.16 [ 1.429321] NET: Registered protocol family 31 [ 1.433776] Bluetooth: HCI device and connection manager initialized [ 1.440155] Bluetooth: HCI socket layer initialized [ 1.445037] Bluetooth: L2CAP socket layer initialized [ 1.450134] Bluetooth: SCO socket layer initialized [ 1.455474] cfg80211: Calling CRDA to update world regulatory domain [ 1.462036] NetLabel: Initializing [ 1.465454] NetLabel: domain hash size = 128 [ 1.469818] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.474822] NetLabel: unlabeled traffic allowed by default [ 2.285766] ab8500-btemp ab8500-btemp.0: Battery identified as unknown, resistance 248018 Ohm [ 2.294311] ab8500-btemp ab8500-btemp.0: failed to identify the battery [ 2.306579] Switching to clocksource dbx500-prcmu-timer [ 2.327941] AppArmor: AppArmor Filesystem Enabled [ 2.332794] MCDE subsystem init begin [ 2.336578] mcde mcde: MCDE iomap: 0xA0350000->0xEC82C000 [ 2.342254] mcde mcde: Probe HW [ 2.345489] mcde mcde: MCDE HW revision 0x03000800 [ 2.350372] mcde mcde: db8500 V2 HW [ 2.353912] mcde mcde: MCDE DSI0 iomap: 0xA0351000->0xEC82E000 [ 2.359741] mcde mcde: MCDE DSI1 iomap: 0xA0352000->0xEC830000 [ 2.365600] mcde mcde: MCDE DSI2 iomap: 0xA0353000->0xEC832000 [ 2.371856] mcde mcde: MCDE_CLK is 159744000 MHz [ 2.377990] MCDE subsystem init done [ 2.401214] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 2.407440] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 2.407684] musb-hdrc: MHDRC RTL version 2.0 [ 2.407684] musb-hdrc: 28/31 max ep, 9216/262144 memory [ 2.408203] musb-hdrc musb-hdrc: USB OTG mode controller at ec840000 using DMA, IRQ 55 [ 2.416809] NET: Registered protocol family 2 [ 2.421478] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) [ 2.429504] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 2.437591] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 2.445892] TCP: Hash tables configured (established 65536 bind 65536) [ 2.452484] TCP reno registered [ 2.455627] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 2.461486] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 2.468139] NET: Registered protocol family 1 [ 2.475067] ux500-product: u9500 detected [ 2.479125] ux500-product: JTAG is enabled [ 2.682098] nmk-i2c nmk-i2c.2: Write to slave 0x18 timed out [ 2.687805] nmk-i2c nmk-i2c.2: no ack received after address transmission [ 2.892456] nmk-i2c nmk-i2c.2: Write to slave 0x18 timed out [ 2.898162] nmk-i2c nmk-i2c.2: no ack received after address transmission [ 3.102478] nmk-i2c nmk-i2c.2: Write to slave 0x18 timed out [ 3.108154] nmk-i2c nmk-i2c.2: no ack received after address transmission [ 3.116485] Unknown UI board [ 3.120941] audit: initializing netlink socket (disabled) [ 3.126495] type=2000 audit(2.360:1): initialized [ 3.133636] highmem bounce pool size: 64 pages [ 3.138580] VFS: Disk quotas dquot_6.5.2 [ 3.142822] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.150238] 9p: Installing v9fs 9p2000 file system support [ 3.156494] Btrfs loaded [ 3.159088] msgmni has been set to 904 [ 3.164154] io scheduler noop registered [ 3.168121] io scheduler deadline registered (default) [ 3.173400] io scheduler cfq registered [ 3.177886] mcde_display_sony_acx424akp_init [ 3.188629] av8100 0-0070: chip version:2 [ 3.257507] b2r2_init [ 3.259918] b2r2 b2r2_bus: init started. [ 3.267547] misc b2r2_blt: b2r2_mem_init: Creating heap for size 16384 bytes [ 3.274963] b2r2 b2r2_bus: init done. [ 3.279846] uart-pl011 uart0: no DMA platform data [ 3.284759] uart-pl011 uart1: no DMA platform data [ 3.289550] uart-pl011 uart2: no DMA platform data [ 3.294860] [drm] Initialized drm 1.1.0 20060810 [ 3.300750] Mali<2>: [ 3.303100] Mali<2>: Inserting Mali v8 device driver. [ 3.308258] Mali<2>: Compiled: May 24 2012, time: 22:11:01. [ 3.313873] Mali<2>: Svn revision: [ 3.317352] Mali<2>: MMU memory system initializing [ 3.322265] Mali<2>: Rendercore: subsystem global mutex initialized [ 3.328674] Mali<2>: Core: subsystem_init: Mali-400 PP [ 3.333862] Mali<2>: Core: subsystem_init: Mali-400 GP [ 3.338989] Mali<2>: Mali L2 cache system initializing [ 3.344177] Mali<1>: Overriding arch resource[4] : [ 3.348968] Mali<1>: Type: MEMORY, base: 8000000, size 4000000 [ 3.354980] create_regulator: db8500-sga: Failed to create debugfs directory [ 3.362518] Mali<2>: MMU registered [ 3.366027] Mali<2>: MMU registered [ 3.369537] Mali<2>: Mali OS memory allocator created with max allocation size of 0x8000000 bytes, cpu_usage_adjust 0x00000000 [ 3.381011] Mali<2>: Memory Validator 'Framebuffer' installed for Mali physical address base==0x00000000, size==0x7FF00000, cpu_adjust==0x00000000 [ 3.394195] Mali<2>: Creating Mali L2 cache: Mali-400 L2 cache [ 3.400054] Mali<1>: Mali memory allocators will be used in this order of preference (lowest numbered first) : [ 3.410125] Mali<1>: 0: Mali SDRAM [ 3.413635] Mali<1>: 5: Linux kernel memory [ 3.419281] Mali<2>: Attach mmu: 0xebab8d40 to core: Mali-400 PP in subsystem: Mali-400 PP [ 3.427612] Mali<2>: Attach mmu: 0xebab8e40 to core: Mali-400 GP in subsystem: Mali-400 GP [ 3.435913] Mali<2>: Mali L2 cache system load complete [ 3.441131] Mali: Mali device driver loaded [ 3.457824] brd: module loaded [ 3.467681] loop: module loaded [ 3.471099] dispdev_init [ 3.476013] tun: Universal TUN/TAP device driver, 1.6 [ 3.481079] tun: (C) 1999-2004 Max Krasnyansky [ 3.487792] smsc911x: Driver version 2008-10-21 [ 3.530487] smsc911x-mdio: probed [ 3.534118] smsc911x smsc911x.0: eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=smsc911x-0:01, irq=-1) [ 3.544830] smsc911x smsc911x.0: eth0: MAC Address: 3e:b8:cc:93:b7:a4 [ 3.551605] PPP generic driver version 2.4.2 [ 3.565429] PPP MPPE Compression module registered [ 3.571289] usbcore: registered new interface driver cdc_acm [ 3.577148] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.585235] Initializing USB Mass Storage driver... [ 3.590362] usbcore: registered new interface driver usb-storage [ 3.596435] USB Mass Storage support registered. [ 3.601318] usbcore: registered new interface driver libusual [ 3.607788] cyttsp_spi_init: Cypress TrueTouch(R) Standard Product SPI Touchscreen Driver (Built May 24 2012 @ 22:13:03) returned 0 [ 3.620178] input: AB8500 Hs Button as /devices/platform/ab8500-i2c.0/ab8500-acc-det.0/input/input0 [ 3.630676] input: AB8500 POn(PowerOn) Key as /devices/platform/ab8500-i2c.0/ab8500-poweron-key.0/input/input1 [ 3.641510] lps001wp_prs barometer driver: init [ 3.641571] lps001wp_prs: probe start. [ 3.647613] lps001wp_prs 2-005c: lps001wp_prs: probed [ 3.664642] ab8500-rtc ab8500-rtc.0: rtc core: registered ab8500-rtc as rtc0 [ 3.672088] i2c /dev entries driver [ 3.677886] lirc_dev: IR Remote Control driver registered, major 251 [ 3.684387] IR NEC protocol handler initialized [ 3.688934] IR RC5(x) protocol handler initialized [ 3.693756] IR RC6 protocol handler initialized [ 3.698303] IR JVC protocol handler initialized [ 3.702880] IR Sony protocol handler initialized [ 3.707489] IR RC5 (streamzap) protocol handler initialized [ 3.713104] IR SANYO protocol handler initialized [ 3.717803] IR MCE Keyboard/mouse protocol handler initialized [ 3.723693] IR LIRC bridge handler initialized [ 3.728149] Linux video capture interface: v2.00 [ 3.736083] regulator_check_drms: V-DISPLAY: operation not allowed [ 3.742675] lsm303dlh_m lsm303dlh.1: Magnetometer, ID : 48:34:33 [ 3.748931] regulator_check_drms: V-DISPLAY: operation not allowed [ 3.755615] lsm303dlhc_a lsm303dlh.0: 3-Axis Accelerometer, ID : 51 [ 3.762512] l3g4200d l3g4200d: 3-Axis Gyroscope device identification: 211 [ 3.770202] ux500_wdt ux500_wdt: initialized [ 3.774963] device-mapper: uevent: version 1.0.3 [ 3.779998] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.788574] Bluetooth: HCI UART driver ver 2.2 [ 3.793121] dbx500-cpufreq : Available frequencies: [ 3.798004] 200 Mhz [ 3.800262] 400 Mhz [ 3.802612] 800 Mhz [ 3.804870] 1000 Mhz [ 3.807464] cpuidle: using governor ladder [ 3.811584] cpuidle: using governor menu [ 3.815795] mmci-pl18x sdi4: managed by runtime pm: pins [ 3.821777] mmci-pl18x sdi4: mmc0: PL180 manf 80 rev4 at 0x80114000 irq 131,-1 (pio) [ 3.829711] mmci-pl18x sdi4: DMA channels RX dma0chan18, TX dma0chan19 [ 3.837799] mmci-pl18x sdi0: managed by runtime pm: pins [ 3.843933] mmci-pl18x sdi0: mmc1: PL180 manf 80 rev4 at 0x80126000 irq 92,-1 (pio) [ 3.851654] mmci-pl18x sdi0: DMA channels RX dma0chan20, TX dma0chan21 [ 3.859741] mmci-pl18x sdi1: managed by runtime pm: pins [ 3.865447] mmci-pl18x sdi1: mmc2: PL180 manf 80 rev4 at 0x80118000 irq 82,-1 (pio) [ 3.873168] mmci-pl18x sdi1: DMA channels RX dma0chan22, TX dma0chan23 [ 3.881958] Registered led device: user_led [ 3.882537] hash1 hash1: managed by runtime pm: regulator [ 3.889556] hash1 hash1: [ux500_hash_probe] successfully probed [ 3.896453] usbcore: registered new interface driver usbhid [ 3.902069] usbhid: USB HID core driver [ 3.910339] platform cg2900.0: CG2900 initialized [ 3.915649] cg2900 cg2900.0: CG2900 Core driver started [ 3.921691] cg2900-test cg2900-test.0: CG2900 test char device driver started [ 3.929229] cg2900-chip cg2900-chip.0: CG2900 chip driver started [ 3.935729] stlc2690-chip stlc2690-chip.0: STLC2690 chip driver started [ 3.944152] Bluetooth: HCI UART driver ver 2.3 [ 3.948852] mmio_init [ 3.951354] Adp1653 flash driver: getting I2C adaptor 2 [ 3.951354] Adp1653 flash driver: trying to register adp1653 at position 0 [ 3.951568] Adp1653 flash driver: Initialized adp1653 [ 3.951843] Adp1653 flash driver: > adp1653_probe [ 3.951843] adp1653 2-0030: adp1653_probe: No platform data supplied. [ 3.958465] Adp1653 flash driver: < adp1653_probe (-22) [ 3.958496] adp1653: probe of 2-0030 failed with error -22 [ 3.964416] camera_flash driver initialized with minor=57 [ 3.972778] mmc0: new high speed MMC card at address 0001 [ 3.983154] mmcblk0: mmc0:0001 7.28 GiB [ 3.987487] mmcblk0boot0: mmc0:0001 partition 1 2.00 MiB [ 3.993560] mmcblk0boot1: mmc0:0001 partition 2 2.00 MiB [ 4.000457] Initialize NMF 2.10.122 Component Manager...... [ 4.006286] [ CM Linux Driver 2.10.122 ] [ 4.006286] mmcblk0: p1 p2 p3 [ 4.024749] usbcore: registered new interface driver snd-usb-audio [ 4.031951] ab5500_init called. [ 4.035491] ab8500_codec_platform_driver_init: Enter. [ 4.040618] ab8500_codec_driver_probe: Register codec. [ 4.046051] mmcblk0boot1: unknown partition table [ 4.052886] ux500_msp_init: Register ux500-msp-dai platform driver. [ 4.059234] ux500_msp_drv_probe: Enter (pdev->name = ux500-msp-i2s). [ 4.060882] mmcblk0boot0: unknown partition table [ 4.070861] ux500_msp_drv_probe: Registering ux500-msp-dai SoC CPU-DAI. [ 4.077575] ux500_msp_drv_probe: Enter (pdev->name = ux500-msp-i2s). [ 4.084106] create_regulator: db8500-vape: Failed to create debugfs directory [ 4.091278] ux500_msp_drv_probe: Registering ux500-msp-dai SoC CPU-DAI. [ 4.097991] ux500_msp_drv_probe: Enter (pdev->name = ux500-msp-i2s). [ 4.104400] create_regulator: db8500-vape: Failed to create debugfs directory [ 4.111572] ux500_msp_drv_probe: Registering ux500-msp-dai SoC CPU-DAI. [ 4.118286] ux500_msp_drv_probe: Enter (pdev->name = ux500-msp-i2s). [ 4.124725] create_regulator: db8500-vape: Failed to create debugfs directory [ 4.131866] ux500_msp_drv_probe: Registering ux500-msp-dai SoC CPU-DAI. [ 4.139160] av8100_codec_drv_probe: Init codec private data.. [ 4.144958] av8100_codec_drv_probe: Register codec. [ 4.150177] cg29xx_codec_driver_probe: Init codec private data.. [ 4.156219] cg29xx_codec_driver_probe: Register codec. [ 4.161926] ux500_pcm_drv_probe: Register ux500-pcm SoC platform driver. [ 4.176055] asoc: av8100-codec-dai <-> ux500-msp-i2s.2 mapping ok [ 4.182769] asoc: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 4.189575] asoc: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 4.196136] asoc: cg29xx-codec-dai.1 <-> ux500-msp-i2s.0 mapping ok [ 4.204742] input: U8500-card AB8500 Hs Status as /devices/platform/soc-audio/sound/card0/input2 [ 4.214813] ALSA device list: [ 4.217803] #0: U8500-card [ 4.220947] Netfilter messages via NETLINK v0.30. [ 4.225921] nf_conntrack version 0.5.0 (12289 buckets, 49156 max) [ 4.232666] ctnetlink v0.93: registering with nfnetlink. [ 4.239776] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.245422] TCP cubic registered [ 4.248870] NET: Registered protocol family 10 [ 4.256195] NET: Registered protocol family 17 [ 4.260681] NET: Registered protocol family 15 [ 4.265441] Bluetooth: RFCOMM TTY layer initialized [ 4.270355] Bluetooth: RFCOMM socket layer initialized [ 4.275634] Bluetooth: RFCOMM ver 1.11 [ 4.279449] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.284851] Bluetooth: BNEP filters: protocol multicast [ 4.290100] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.296539] NET: Registered protocol family 35 [ 4.301208] 9pnet: Installing 9P2000 support [ 4.305816] NET: Registered protocol family 37 [ 4.310333] Registering the dns_resolver key type [ 4.315277] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 4.323089] Registering SWP/SWPB emulation handler [ 4.329559] l2x0-prefetch: initialized. [ 4.334747] mcde_display_hdmi_init [ 4.339080] regulator regulator.24: VEXTSUPPLY2-is_enabled (bank, reg, mask, value): 0x04, 0x08, 0x0c, 0x13 [ 4.339111] regulator_init_complete: db8500-esram12: disabling [ 4.345794] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 4.352874] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0 [ 4.360351] input: gpio-keys as /devices/platform/gpio-keys/input/input3 [ 4.372802] ab8500-rtc ab8500-rtc.0: setting system clock to 2012-06-28 09:19:20 UTC (1340875160) [ 4.382995] Freeing init memory: 356K [ 4.395385] mmc1: host does not support reading read-only switch. assuming write-enable. [ 4.404022] mmc1: new SDHC card at address b368 [ 4.409667] mmcblk1: mmc1:b368 7.70 GiB [ 4.416687] mmcblk1: p1 p2 [ 4.486297] udevd[863]: starting version 175 [ 4.557617] mmcblk0: r/w command failed, status = 0x80000900 [ 4.563690] end_request: I/O error, dev mmcblk0, sector 15269624 [ 4.569793] Buffer I/O error on device mmcblk0, logical block 1908703 [ 6.164733] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 6.172210] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 6.201446] EXT4-fs (mmcblk1p2): recovery complete [ 6.597808] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.635650] abx500-acc-det ab8500-acc-det.0: Accessory: DISCONNECTED [ 8.703857] udevd[1091]: starting version 175 [ 9.124511] av8100_hdmi av8100_hdmi.3: HDMI display probed [ 10.093994] anc_status_control_put: Unable to configure ANC! (ret = -22) [ 10.483886] mmcblk0boot1: r/w command failed, status = 0x80000900 [ 10.490203] end_request: I/O error, dev mmcblk0boot1, sector 3832 [ 10.496337] Buffer I/O error on device mmcblk0boot1, logical block 479 [ 12.013977] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ 13.242584] init: udev-fallback-graphics main process (1316) terminated with status 1 [ 13.953033] gadget: using random self ethernet address [ 13.953063] gadget: using random host ethernet address [ 13.961578] usb0: MAC 42:f2:ed:be:8d:b7 [ 13.961608] usb0: HOST MAC 12:dd:5a:97:0b:41 [ 13.965820] gadget: Mass Storage Function, version: 2009/09/11 [ 13.965850] gadget: Number of LUNs=1 [ 13.965850] lun0: LUN: removable file: (no medium) [ 13.965942] gadget: Multifunction Composite Gadget [ 13.965942] gadget: userspace failed to provide iSerialNumber [ 13.965972] gadget: g_multi ready [ 13.966003] musb-hdrc musb-hdrc: MUSB HDRC host driver [ 13.969268] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1 [ 13.975036] hub 1-0:1.0: USB hub found [ 13.975067] hub 1-0:1.0: 1 port detected [ 13.996673] cg2900-uart cg2900-uart.0: UART opened [ 14.005126] cg2900-uart cg2900-uart.0: Transport connected [ 14.005157] cg2900-uart cg2900-uart.0: Set chip power: ENABLE [ 14.078247] init: failsafe main process (1348) killed by TERM signal [ 14.204467] ------------[ cut here ]------------ [ 14.204498] WARNING: at /build/buildd/linux-linaro-lt-ux500-3.3-3.3.1/kernel/softirq.c:159 local_bh_enable_ip+0xa0/0xd4() [ 14.204528] Modules linked in: g_multi [ 14.204559] [] (unwind_backtrace+0x0/0x144) from [] (dump_stack+0x20/0x24) [ 14.204620] [] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x74) [ 14.204620] [] (warn_slowpath_common+0x5c/0x74) from [] (warn_slowpath_null+0x2c/0x34) [ 14.204650] [] (warn_slowpath_null+0x2c/0x34) from [] (local_bh_enable_ip+0xa0/0xd4) [ 14.204681] [] (local_bh_enable_ip+0xa0/0xd4) from [] (_raw_spin_unlock_bh+0x48/0x4c) [ 14.204711] [] (_raw_spin_unlock_bh+0x48/0x4c) from [] (cg2900_hu_dequeue+0x7c/0x17c) [ 14.204742] [] (cg2900_hu_dequeue+0x7c/0x17c) from [] (cg2900_hci_uart_tx_wakeup+0x124/0x180) [ 14.204772] [] (cg2900_hci_uart_tx_wakeup+0x124/0x180) from [] (hci_uart_tty_wakeup+0x60/0x7c) [ 14.204803] [] (hci_uart_tty_wakeup+0x60/0x7c) from [] (tty_wakeup+0x60/0x6c) [ 14.204833] [] (tty_wakeup+0x60/0x6c) from [] (uart_write_wakeup+0x28/0x30) [ 14.204864] [] (uart_write_wakeup+0x28/0x30) from [] (pl011_tx_chars+0x168/0x194) [ 14.204895] [] (pl011_tx_chars+0x168/0x194) from [] (pl011_int+0xd4/0x144) [ 14.204925] [] (pl011_int+0xd4/0x144) from [] (handle_irq_event_percpu+0x78/0x2e0) [ 14.204956] [] (handle_irq_event_percpu+0x78/0x2e0) from [] (handle_irq_event+0x4c/0x6c) [ 14.204986] [] (handle_irq_event+0x4c/0x6c) from [] (handle_fasteoi_irq+0xa8/0x168) [ 14.205017] [] (handle_fasteoi_irq+0xa8/0x168) from [] (generic_handle_irq+0x3c/0x50) [ 14.205047] [] (generic_handle_irq+0x3c/0x50) from [] (handle_IRQ+0x5c/0xbc) [ 14.205078] [] (handle_IRQ+0x5c/0xbc) from [] (gic_handle_irq+0x34/0xb8) [ 14.205108] [] (gic_handle_irq+0x34/0xb8) from [] (__irq_svc+0x40/0x70) [ 14.205139] Exception stack(0xeb887e50 to 0xeb887e98) [ 14.205139] 7e40: 001ce7b2 00000000 00000000 ffffb1af [ 14.205169] 7e60: 00000000 00004e52 00000001 c1a374d0 c0a5ae50 0103f000 00000000 eb887f04 [ 14.205169] 7e80: c09f84d0 eb887e98 00000000 c0487338 80000113 ffffffff [ 14.205200] [] (__irq_svc+0x40/0x70) from [] (dbs_check_cpu+0x74/0x3b4) [ 14.205230] [] (dbs_check_cpu+0x74/0x3b4) from [] (do_dbs_timer+0x64/0x108) [ 14.205261] [] (do_dbs_timer+0x64/0x108) from [] (process_one_work+0x138/0x4ac) [ 14.205261] [] (process_one_work+0x138/0x4ac) from [] (worker_thread+0x14c/0x314) [ 14.205322] [] (worker_thread+0x14c/0x314) from [] (kthread+0x98/0xa4) [ 14.205322] [] (kthread+0x98/0xa4) from [] (kernel_thread_exit+0x0/0x8) [ 14.205352] ---[ end trace 43f868faad588974 ]--- [ 14.264923] cg2900-uart cg2900-uart.0: Received Read Local Version Information with: [ 14.264923] hci_version: 0x06 [ 14.264923] hci_revision: 0x0200 [ 14.264953] lmp_pal_version: 0x06 [ 14.264953] manufacturer: 0x0030 [ 14.264953] hci_sub_version: 0x0000 [ 14.268463] cg2900-uart cg2900-uart.0: Chip supported by the CG2900 chip driver [ 14.268493] cg2900-uart cg2900-uart.0: Chip handler found [ 14.764312] cg2900-uart cg2900-uart.0: Set chip power: DISABLE [ 14.782836] Bluetooth: CG2900 registered [ 14.783233] Bluetooth: Open ST-Ericsson CG2900 driver [ 14.783264] cg2900-uart cg2900-uart.0: Set chip power: ENABLE [ 14.791198] cg2900-audiobt cg2900-audiobt.0: CG2900 device added [ 14.797119] anc_status_control_put: Unable to configure ANC! (ret = -22) [ 14.802551] cg2900-audiofm cg2900-audiofm.0: CG2900 Audio driver started [ 14.849853] init: hybrid-gfx main process (1455) terminated with status 1 [ 15.154388] cg2900-uart cg2900-uart.0: Baud rate changed to 3000000 baud [ 15.263854] ADDRCONF(NETDEV_UP): usb0: link is not ready [ 15.304290] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xec860000, IRQ: 300 [ 15.396759] init: tty1 main process (1505) killed by TERM signal [ 15.732604] Console: switching to colour frame buffer device 128x48 [ 15.962921] Bluetooth: CG2900 BT core is enabled [ 16.416412] [ 16.416442] [4fec21a4:158b295f] CG2900_FM_Driver: Sending Gen Power Up [ 16.503051] [ 16.503082] [4fec21a4:1ab5a3c0] CG2900_FM_Driver: Sending Set Mode [ 18.072998] cw1200_core: module is from the staging directory, the quality is unknown, you have been warned. [ 18.076904] cw1200_wlan: module is from the staging directory, the quality is unknown, you have been warned. [ 18.359863] mmc2: new SDIO card at address 0001 [ 18.367950] Probe called [ 18.424468] WLAN device is ready. [ 18.424530] Cut 2.x silicon is detected. [ 18.425598] Cut 2.2 detected. [ 18.425689] cw1200_load_firmware: CW1200 detected. [ 18.494018] Firmware download completed. [ 18.494110] SW IRQ subscribe [ 18.496032] CW1200 WSM init done. [ 18.496032] Input buffers: 8 x 1632 bytes [ 18.496063] Hardware: 261.5 [ 18.496063] WSM firmware [WSM_A30.02.0380_PTA4W Feb 17 2012 10:43:10], ver: 3020, build: 380, api: 1042, cap: 0x000B [ 18.511230] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 18.511260] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511260] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 18.511291] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511291] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 18.511322] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511322] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 18.511352] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511352] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 18.511383] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511383] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 18.511413] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511413] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 18.511444] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511444] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 18.511444] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511474] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 18.511474] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511505] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 18.511505] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511535] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 18.511535] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 18.511535] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 18.511566] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 18.511566] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 18.511596] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 18.511596] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 18.511627] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 18.512756] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 18.517395] is registered as 'phy0' [ 18.636108] udevd[1112]: renamed network interface wlan0 to wlan23 [ 24.346466] init: plymouth-upstart-bridge main process (1382) killed by TERM signal [ 25.664245] eth0: no IPv6 routers present [ 40.495574] av8100_codec_set_dai_fmt: Setting audio_input_format (if_format = 2, if_mode = 1). [ 40.497222] av8100_codec_send_audio_infoframe: Preparing audio info-frame. [ 40.497253] av8100_codec_send_audio_infoframe: Sending audio info-frame. [ 40.550018] av8100_codec_set_dai_fmt: Setting audio_input_format (if_format = 2, if_mode = 1). [ 40.551788] av8100_codec_send_audio_infoframe: Preparing audio info-frame. [ 40.551788] av8100_codec_send_audio_infoframe: Sending audio info-frame. [ 40.869232] init: anacron main process (1484) killed by TERM signal [ 43.145904] warning: process `colord' used the deprecated sysctl system call with 8.1.2. [ 45.037139] Mali<2>: MMU session begin [ 45.037200] Mali<2>: Page directory for session 0xea260240 placed at physical address 0x0BFC4000 [ 45.037506] Mali<2>: MMU session begin: success [ 45.037536] Mali<2>: Core: session_begin: for Mali-400 PP [ 45.037536] Mali<2>: Core: session_begin: for Mali-400 GP [ 48.124053] EXT4-fs (mmcblk0p3): recovery complete [ 48.124084] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)