root@localhost:~/lava-test# lava-test run pwrmgmt LAVA: Running shell command: 'cd pm-qa && make -k check' LAVA: (stdout) make[1]: Entering directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/utils' LAVA: (stderr) make[1]: [uncheck] Error 1 (ignored) LAVA: (stdout) make[1]: Leaving directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/utils' LAVA: (stdout) make[1]: Entering directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpufreq' LAVA: (stdout) ### LAVA: (stdout) ### cpufreq_01: LAVA: (stdout) ### test the cpufreq framework is available for frequency LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_01 LAVA: (stdout) ### LAVA: (stdout) cpufreq_01.0/cpu0: checking 'scaling_available_frequencies' exists... Ok LAVA: (stdout) cpufreq_01.1/cpu0: checking 'scaling_cur_freq' exists... Ok LAVA: (stdout) cpufreq_01.2/cpu0: checking 'scaling_setspeed' exists... Ok LAVA: (stdout) cpufreq_01.0/cpu1: checking 'scaling_available_frequencies' exists... Ok LAVA: (stdout) cpufreq_01.1/cpu1: checking 'scaling_cur_freq' exists... Ok LAVA: (stdout) cpufreq_01.2/cpu1: checking 'scaling_setspeed' exists... Ok LAVA: (stdout) -------- total = 6 LAVA: (stdout) -------- pass = 6 LAVA: (stdout) ### LAVA: (stdout) ### cpufreq_02: LAVA: (stdout) ### test the cpufreq framework is available for governor LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_02 LAVA: (stdout) ### LAVA: (stdout) cpufreq_02.0/cpu0: checking 'scaling_available_governors' exists... Ok LAVA: (stdout) cpufreq_02.1/cpu0: checking 'scaling_governor' exists... Ok LAVA: (stdout) cpufreq_02.0/cpu1: checking 'scaling_available_governors' exists... Ok LAVA: (stdout) cpufreq_02.1/cpu1: checking 'scaling_governor' exists... Ok LAVA: (stdout) -------- total = 4 LAVA: (stdout) -------- pass = 4 LAVA: (stdout) ### LAVA: (stdout) ### cpufreq_03: LAVA: (stdout) ### test the governor change is effective LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_03 LAVA: (stdout) ### LAVA: (stdout) cpufreq_03.0/cpu0: checking governor change to 'ondemand'... Ok LAVA: (stdout) cpufreq_03.1/cpu0: checking governor change to 'performance'... Ok LAVA: (stdout) cpufreq_03.0/cpu1: checking governor change to 'ondemand'... Ok LAVA: (stdout) cpufreq_03.1/cpu1: checking governor change to 'performance'... Ok LAVA: (stdout) -------- total = 4 LAVA: (stdout) -------- pass = 4 LAVA: (stdout) ### LAVA: (stdout) ### cpufreq_04: LAVA: (stdout) ### test the change of the frequency is effective in 'userspace' mode LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_04 LAVA: (stdout) ### LAVA: (stdout) cpufreq_04.0: userspace not supported... skip LAVA: (stdout) -------- total = 0 LAVA: (stdout) -------- pass = 0 LAVA: (stdout) ### LAVA: (stdout) ### cpufreq_05: LAVA: (stdout) ### test 'ondemand' and 'conservative' trigger correctly the configuration directory LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_05 LAVA: (stdout) ### LAVA: (stdout) cpufreq_05.0: checking 'ondemand' directory exists... Ok LAVA: (stdout) cpufreq_05.1: conservative not supported... skip LAVA: (stdout) cpufreq_05.2: userspace not supported... skip LAVA: (stdout) cpufreq_05.3: combine governors not supported... skip LAVA: (stdout) -------- total = 1 LAVA: (stdout) -------- pass = 1 LAVA: (stdout) ### LAVA: (stdout) ### cpufreq_06: LAVA: (stdout) ### test the change of the frequencies affect the performances of a test program LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_06 LAVA: (stdout) ### LAVA: (stdout) cpufreq_06.0: userspace not supported... skip LAVA: (stdout) ### LAVA: (stdout) ### cpufreq_07: LAVA: (stdout) ### test the load of the cpu affects the frequency with 'ondemand' LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_07 LAVA: (stdout) ### LAVA: (stdout) cpufreq_07.0/cpu0: checking 'ondemand' increase frequency on load... Ok LAVA: (stdout) cpufreq_07.1/cpu0: checking 'ondemand' decrease frequency on idle... Ok LAVA: (stdout) cpufreq_07.0/cpu1: checking 'ondemand' increase frequency on load... Ok LAVA: (stdout) cpufreq_07.1/cpu1: checking 'ondemand' decrease frequency on idle... Ok LAVA: (stdout) -------- total = 4 LAVA: (stdout) -------- pass = 4 LAVA: (stdout) ### LAVA: (stdout) ### cpufreq_08: LAVA: (stdout) ### test the load of the cpu does not affect the frequency with 'userspace' LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_08 LAVA: (stdout) ### LAVA: (stdout) cpufreq_08.0: userspace not supported... skip LAVA: (stdout) ### LAVA: (stdout) ### cpufreq_09: LAVA: (stdout) ### test the load of the cpu does not affect the frequency with 'powersave' LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_09 LAVA: (stdout) ### LAVA: (stdout) cpufreq_09.0: powersave not supported... skip LAVA: (stdout) make[1]: Leaving directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpufreq' LAVA: (stdout) make[1]: Entering directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpuhotplug' LAVA: (stdout) ### LAVA: (stdout) ### 1_sanity_check: LAVA: (stdout) ### ensure all the cpus are online before the tests LAVA: (stdout) ### ### LAVA: (stdout) 1_sanity_check.0: checking all cpu are online... Ok LAVA: (stdout) -------- total = 1 LAVA: (stdout) -------- pass = 1 LAVA: (stdout) ### LAVA: (stdout) ### cpuhotplug_01: LAVA: (stdout) ### test the sysfs files are present LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_01 LAVA: (stdout) ### LAVA: (stdout) cpuhotplug_01.0: checking 'online' exists... Ok LAVA: (stdout) cpuhotplug_01.1: checking 'offline' exists... Ok LAVA: (stdout) cpuhotplug_01.2: checking 'possible' exists... Ok LAVA: (stdout) cpuhotplug_01.3: checking 'present' exists... Ok LAVA: (stdout) cpuhotplug_01.0/cpu0: checking 'online' exists... Ok LAVA: (stdout) cpuhotplug_01.0/cpu1: checking 'online' exists... Ok LAVA: (stdout) -------- total = 6 LAVA: (stdout) -------- pass = 6 LAVA: (stdout) ### LAVA: (stdout) ### cpuhotplug_02: LAVA: (stdout) ### test the cpu state is reflected in sysfs LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_02 LAVA: (stdout) ### LAVA: (stdout) cpuhotplug_02.0/cpu1: checking cpu is offline... Ok LAVA: (stdout) cpuhotplug_02.1/cpu1: checking cpu is online... Ok LAVA: (stdout) -------- total = 2 LAVA: (stdout) -------- pass = 2 LAVA: (stdout) ### LAVA: (stdout) ### cpuhotplug_03: LAVA: (stdout) ### test the affinity does not work on an offline cpu LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_03 LAVA: (stdout) ### LAVA: (stdout) cpuhotplug_03.0/cpu1: checking setting affinity on cpu fails... Ok LAVA: (stdout) -------- total = 1 LAVA: (stdout) -------- pass = 1 LAVA: (stdout) ### LAVA: (stdout) ### cpuhotplug_04: LAVA: (stdout) ### test task is migrated with task affinity LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_04 LAVA: (stdout) ### LAVA: (stdout) cpuhotplug_04.0/cpu1: checking affinity is set... Ok LAVA: (stdout) cpuhotplug_04.1/cpu1: checking offlining a cpu with affinity succeed... Ok LAVA: (stdout) cpuhotplug_04.2/cpu1: checking affinity changed... Ok LAVA: (stdout) -------- total = 3 LAVA: (stdout) -------- pass = 3 LAVA: (stdout) ### LAVA: (stdout) ### cpuhotplug_05: LAVA: (stdout) ### test cpus are reflected on /proc/cpuinfo correctly LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_05 LAVA: (stdout) ### LAVA: (stdout) cpuhotplug_05.0/cpu1: checking offline processor not found in cpuinfo... Ok LAVA: (stdout) -------- total = 1 LAVA: (stdout) -------- pass = 1 LAVA: (stdout) ### LAVA: (stdout) ### cpuhotplug_06: LAVA: (stdout) ### test interrupts show the right configuration in /proc/interrupts LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_06 LAVA: (stdout) ### LAVA: (stdout) cpuhotplug_06.0/cpu1: checking offline processor not found in interrupts... Ok LAVA: (stdout) -------- total = 1 LAVA: (stdout) -------- pass = 1 LAVA: (stdout) ### LAVA: (stdout) ### cpuhotplug_07: LAVA: (stdout) ### test userspace notification LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_07 LAVA: (stdout) ### LAVA: (stdout) cpuhotplug_07.0/cpu1: checking offline event was received... Err LAVA: (stdout) cpuhotplug_07.1/cpu1: checking online event was received... Err LAVA: (stdout) -------- total = 2 LAVA: (stdout) -------- pass = 0 LAVA: (stdout) -------- fail = 2 LAVA: (stdout) ### LAVA: (stdout) ### cpuhotplug_08: LAVA: (stdout) ### test userspace notification LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_08 LAVA: (stdout) ### LAVA: (stdout) cpuhotplug_08.0: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.1: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.2: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.3: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.4: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.5: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.6: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.7: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.8: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.9: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.10: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.11: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.12: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.13: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.14: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.15: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.16: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.17: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.18: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.19: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.20: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.21: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.22: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.23: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.24: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.25: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.26: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.27: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.28: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.29: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.30: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.31: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.32: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.33: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.34: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.35: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.36: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.37: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.38: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.39: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.40: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.41: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.42: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.43: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.44: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.45: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.46: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.47: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.48: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.49: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.50: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.51: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.52: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.53: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.54: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.55: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.56: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.57: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.58: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.59: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.60: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.61: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.62: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.63: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.64: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.65: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.66: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.67: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.68: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.69: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.70: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.71: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.72: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.73: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.74: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.75: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.76: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.77: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.78: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.79: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.80: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.81: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.82: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.83: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.84: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.85: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.86: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.87: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.88: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.89: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.90: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.91: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.92: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.93: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.94: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.95: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.96: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.97: checking cpu1 is online... Ok LAVA: (stdout) cpuhotplug_08.98: checking cpu1 is offline... Ok LAVA: (stdout) cpuhotplug_08.99: checking cpu1 is online... Ok LAVA: (stdout) -------- total = 100 LAVA: (stdout) -------- pass = 100 LAVA: (stdout) ### LAVA: (stdout) ### z_sanity_check: LAVA: (stdout) ### ensure all the cpus are online when the tests are finished LAVA: (stdout) ### ### LAVA: (stdout) z_sanity_check.0: checking all cpu are back online... Ok LAVA: (stdout) -------- total = 1 LAVA: (stdout) -------- pass = 1 LAVA: (stdout) make[1]: Leaving directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpuhotplug' LAVA: (stdout) make[1]: Entering directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpuidle' LAVA: (stdout) cpuidle is not enabled. Skipping all cpudile tests... LAVA: (stdout) make[1]: Leaving directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpuidle' LAVA: (stderr) ./thermal_sanity.sh: line 34: test_status_show: command not found LAVA: (stdout) make[1]: Entering directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/thermal' LAVA: (stdout) ### LAVA: (stdout) ### thermal_01: LAVA: (stdout) ### test/verify the thermal zone files are present in the sysfs and check the validity of the mode field, bindings and trip tes LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#thermal_01 LAVA: (stdout) ### LAVA: (stdout) thermal_01.0: checking 'mode' exists... Ok LAVA: (stdout) thermal_01.1: checking 'temp' exists... Ok LAVA: (stdout) thermal_01.2: checking 'type' exists... Ok LAVA: (stdout) thermal_01.3: checking 'uevent' exists... Ok LAVA: (stdout) thermal_01.4: checking 'thermal_zone0'/'temp' ='35000'... pass LAVA: (stdout) thermal_01.0: checking thermal_zone0 cur_mode=enabled... Ok LAVA: (stdout) thermal_01.1: checking thermal_zone0 cur_mode=disabled... Ok LAVA: (stdout) thermal_01.2: checking 'trip_point_0_temp' exists... Ok LAVA: (stdout) thermal_01.3: checking 'trip_point_0_type' exists... Ok LAVA: (stdout) thermal_01.4: checking 'thermal_zone0'/'trip_point_0_temp' ='70000'... pass LAVA: (stdout) thermal_01.5: checking 'trip_point_1_temp' exists... Ok LAVA: (stdout) thermal_01.6: checking 'trip_point_1_type' exists... Ok LAVA: (stdout) thermal_01.7: checking 'thermal_zone0'/'trip_point_1_temp' ='75000'... pass LAVA: (stdout) thermal_01.8: checking 'trip_point_2_temp' exists... Ok LAVA: (stdout) thermal_01.9: checking 'trip_point_2_type' exists... Ok LAVA: (stdout) thermal_01.10: checking 'thermal_zone0'/'trip_point_2_temp' ='80000'... pass LAVA: (stdout) thermal_01.11: checking 'cdev0_trip_point' exists... Ok LAVA: (stdout) thermal_01.12: checking 'thermal_zone0/cdev0_trip_point' valid binding... pass LAVA: (stdout) thermal_01.13: checking 'cdev1_trip_point' exists... Ok LAVA: (stdout) thermal_01.14: checking 'thermal_zone0/cdev1_trip_point' valid binding... pass LAVA: (stdout) thermal_01.15: checking 'cdev2_trip_point' exists... Ok LAVA: (stdout) thermal_01.16: checking 'thermal_zone0/cdev2_trip_point' valid binding... pass LAVA: (stdout) -------- total = 15 LAVA: (stdout) -------- pass = 15 LAVA: (stdout) ### LAVA: (stdout) ### thermal_02: LAVA: (stdout) ### test/verify the cooling device files are present in the sysfs LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#thermal_02 LAVA: (stdout) ### LAVA: (stdout) thermal_02.0: checking 'cur_state' exists... Ok LAVA: (stdout) thermal_02.1: checking 'max_state' exists... Ok LAVA: (stdout) thermal_02.2: checking 'type' exists... Ok LAVA: (stdout) thermal_02.3: checking 'uevent' exists... Ok LAVA: (stdout) thermal_02.0: checking cooling_device0 cur_state=0... Ok LAVA: (stdout) thermal_02.1: checking cooling_device0 cur_state=1... Ok LAVA: (stdout) thermal_02.2: checking cooling_device0 cur_state=2... Ok LAVA: (stdout) thermal_02.3: checking cooling_device0 cur_state=3... Ok LAVA: (stdout) thermal_02.4: checking cooling_device0 cur_state=4... Err LAVA: (stdout) -------- total = 9 LAVA: (stdout) -------- pass = 8 LAVA: (stdout) -------- fail = 1 LAVA: (stdout) ### LAVA: (stdout) ### thermal_03: LAVA: (stdout) ### test/verify that temperature is increasing/decreasing as the load is increased/decreased LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#thermal_03 LAVA: (stdout) ### LAVA: (stdout) thermal_03.0: checking start cpu heat binary... Ok LAVA: (stdout) thermal_03.1: checking temperature variation with load... Err LAVA: (stdout) -------- total = 2 LAVA: (stdout) -------- pass = 1 LAVA: (stdout) -------- fail = 1 LAVA: (stdout) ### LAVA: (stdout) ### thermal_04: LAVA: (stdout) ### test/verify the cooling device are lowering the temperature down LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#thermal_04 LAVA: (stdout) ### LAVA: (stdout) thermal_04.0: checking cooling_device0:state=1 effective cool=0 ... Ok LAVA: (stdout) thermal_04.1: checking cooling_device0:state=2 effective cool=0 ... Ok LAVA: (stdout) thermal_04.2: checking cooling_device0:state=3 effective cool=0 ... Ok LAVA: (stdout) thermal_04.3: checking cooling_device0:state=4 effective cool=0 ... Ok LAVA: (stdout) -------- total = 4 LAVA: (stdout) -------- pass = 4 LAVA: (stdout) ### LAVA: (stdout) ### thermal_05: LAVA: (stdout) ### test/verify the cpufreq cooling device are clipping the frequencies LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#thermal_05 LAVA: (stdout) ### LAVA: (stdout) thermal-cpufreq-0 LAVA: (stdout) thermal_05.0: checking cdev=cooling_device0 state=1... Ok LAVA: (stdout) thermal_05.1: checking cdev=cooling_device0 state=2... Ok LAVA: (stdout) thermal_05.2: checking cdev=cooling_device0 state=3... Ok LAVA: (stdout) thermal_05.3: checking cdev=cooling_device0 state=4... Ok LAVA: (stdout) -------- total = 4 LAVA: (stdout) -------- pass = 4 LAVA: (stdout) ### LAVA: (stdout) ### thermal_06: LAVA: (stdout) ### test/verify that different trip points are crossed when load is maximum LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#thermal_06 LAVA: (stdout) ### LAVA: (stdout) thermal_06.0: test of trip points being crossed... skip LAVA: (stdout) make[1]: Leaving directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/thermal' LAVA: (stdout) make[1]: Entering directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cputopology' LAVA: (stdout) ### LAVA: (stdout) ### cputopology_01: LAVA: (stdout) ### test the topology is implemented in the kernel LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cputopology_01 LAVA: (stdout) ### LAVA: (stdout) cputopology_01.0/cpu0: checking topology is enabled... Ok LAVA: (stdout) cputopology_01.0/cpu1: checking topology is enabled... Ok LAVA: (stdout) -------- total = 2 LAVA: (stdout) -------- pass = 2 LAVA: (stdout) ### LAVA: (stdout) ### cputopology_02: LAVA: (stdout) ### test the topology files are present LAVA: (stdout) ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cputopology_02 LAVA: (stdout) ### LAVA: (stdout) cputopology_02.0/cpu0: checking 'core_id' exists... Ok LAVA: (stdout) cputopology_02.1/cpu0: checking 'core_siblings' exists... Ok LAVA: (stdout) cputopology_02.2/cpu0: checking 'core_siblings_list' exists... Ok LAVA: (stdout) cputopology_02.3/cpu0: checking 'physical_package_id' exists... Ok LAVA: (stdout) cputopology_02.4/cpu0: checking 'thread_siblings' exists... Ok LAVA: (stdout) cputopology_02.5/cpu0: checking 'thread_siblings_list' exists... Ok LAVA: (stdout) cputopology_02.0/cpu1: checking 'core_id' exists... Ok LAVA: (stdout) cputopology_02.1/cpu1: checking 'core_siblings' exists... Ok LAVA: (stdout) cputopology_02.2/cpu1: checking 'core_siblings_list' exists... Ok LAVA: (stdout) cputopology_02.3/cpu1: checking 'physical_package_id' exists... Ok LAVA: (stdout) cputopology_02.4/cpu1: checking 'thread_siblings' exists... Ok LAVA: (stdout) cputopology_02.5/cpu1: checking 'thread_siblings_list' exists... Ok LAVA: (stdout) -------- total = 12 LAVA: (stdout) -------- pass = 12 LAVA: (stdout) make[1]: Leaving directory `/root/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cputopology' LAVA: run complete, result_id is 'pwrmgmt.2013-06-19T12:43:35Z'