Welcome to minicom 2.5 OPTIONS: I18n Compiled on May 2 2011, 10:05:24. Port /dev/ttyUSB0 Press CTRL-A Z for help on special keys U-Boot SPL 2012.07 (Aug 27 2012 - 19:28:10) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2012.07 (Aug 27 2012 - 19:28:10) CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt ** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 474 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 reading uImage 4624984 bytes read reading uInitrd 3405298 bytes read reading board.dtb 2018 bytes read ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4624920 Bytes = 4.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 3405234 Bytes = 3.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 815f0000 Booting using the fdt blob at 0x815f0000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 815f0000, end 815f37e1 Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.4.0-2-linaro-lt-omap (buildd@alfirk) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2~ci+120825182553-Ubuntu SMP PREEMPT Sat Aug 25 210 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board, model: TI OMAP4 PandaBoard [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] cma: CMA: reserved 8 MiB at a8800000 [ 0.000000] cma: CMA: reserved 104 MiB at a9000000 [ 0.000000] cma: CMA: reserved 32 MiB at a6800000 [ 0.000000] cma: CMA: reserved 16 MiB at a5000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] omap2_set_globals_tap [ 0.000000] OMAP4: Map 0xa6600000 to 0xfe600000 for dram barrier [ 0.000000] omap2_set_globals_tap [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1940000 s12800 r8192 d15872 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584 [ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=8f9ece8b-d5e7-445e-b762-ac209d7dcd66 rootwait ro earlyprintk fixrtc nocompcache vram=48MM [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 614MB 408MB = 1022MB total [ 0.000000] Memory: 806584k/806584k available, 241992k reserved, 270336K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc0714f88 (7220 kB) [ 0.000000] .init : 0xc0715000 - 0xc0772200 ( 373 kB) [ 0.000000] .data : 0xc0774000 - 0xc0819e70 ( 664 kB) [ 0.000000] .bss : 0xc0819e94 - 0xc0dcd7a0 (5839 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:562 [ 0.000000] omap_sr_disable: omap_sr struct for sr_wakeup not found [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.064300] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488) [ 0.137664] pid_max: default: 32768 minimum: 301 [ 0.143280] Security Framework initialized [ 0.147735] AppArmor: AppArmor initialized [ 0.152587] Mount-cache hash table entries: 512 [ 0.164001] CPU: Testing write buffer coherency: ok [ 0.169525] ftrace: allocating 29481 entries in 58 pages [ 0.232696] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.238983] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.247650] Setting up static identity map for 0x8046dc78 - 0x8046dcc4 [ 0.254547] L310 cache controller enabled [ 0.258819] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.267456] omap_sar_ram_init [ 0.270874] generating sar_ram layout... [ 0.275177] sar ram layout created [ 0.356994] CPU1: Booted secondary processor [ 0.426483] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.426574] CPU1: Unknown IPI message 0x1 [ 0.426940] Brought up 2 CPUs [ 0.426940] SMP: Total of 2 processors activated (2792.83 BogoMIPS). [ 0.453155] devtmpfs: initialized [ 0.467803] EVM: security.selinux [ 0.471313] EVM: security.SMACK64 [ 0.474822] EVM: security.capability [ 0.481170] omap_sr_disable: omap_sr struct for sr_core not found [ 0.487579] omap_sr_disable: omap_sr struct for sr_core not found [ 0.493988] omap_sr_disable: omap_sr struct for sr_core not found [ 0.500427] omap_sr_disable: omap_sr struct for sr_core not found [ 0.506835] omap_sr_disable: omap_sr struct for sr_core not found [ 0.513244] omap_sr_disable: omap_sr struct for sr_core not found [ 0.519653] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.525970] omap_sr_disable: omap_sr struct for sr_core not found [ 0.532379] omap_sr_disable: omap_sr struct for sr_core not found [ 0.538818] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.545166] omap_sr_disable: omap_sr struct for sr_core not found [ 0.551605] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.558959] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.565307] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.571746] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.578063] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.584411] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.593475] omap_hwmod: mcpdm: _wait_target_ready error: -16 [ 0.599426] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.605712] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.611328] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.617675] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.623992] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.630340] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.637939] omap_sr_disable: omap_sr struct for sr_iva not found [ 0.650054] dummy: [ 0.662658] NET: Registered protocol family 16 [ 0.681274] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.689300] GPMC revision 6.0 [ 0.699768] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.706726] OMAP GPIO hardware version 0.1 [ 0.711303] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.718688] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.725830] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.733032] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.740295] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.753173] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.761169] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.772979] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [ 0.780731] omap_hwmod_mux_init: Could not allocate device mux entry [ 0.797668] No ATAGs? [ 0.799865] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.808563] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.823669] Updated GPU clock source to be dpll_per_m7x2_ck [ 0.835693] omap-mcbsp.1: alias pad_fck already exists [ 0.842224] omap-mcbsp.2: alias pad_fck already exists [ 0.848236] omap-mcbsp.3: alias pad_fck already exists [ 0.854278] omap-mcbsp.4: alias pad_fck already exists [ 0.860687] omap4plus_scm.0: alias fck already exists [ 0.868804] OMAP DMA hardware revision 0.0 [ 0.874877] emif emif.1: Device configured with addr = f0e00000 and IRQ142 [ 0.882568] emif emif.2: Device configured with addr = f1000000 and IRQ143 [ 0.949737] bio: create slab at 0 [ 0.956787] vwl1271: 1800 mV [ 0.966827] SCSI subsystem initialized [ 0.973632] usbcore: registered new interface driver usbfs [ 0.980010] usbcore: registered new interface driver hub [ 0.986083] usbcore: registered new device driver usb [ 0.994445] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 1.003540] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.015014] twl 1-0048: PIH (irq 39) chaining IRQs 416..436 [ 1.022949] VUSB: 3300 mV normal standby [ 1.032775] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 1.041900] V1V8: 1800 mV normal standby [ 1.047393] V2V1: 2100 mV normal standby [ 1.053009] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 1.060760] VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 1.068756] VCXIO: 1800 mV normal standby [ 1.073028] VCXIO: supplied by V2V1 [ 1.079376] VDAC: 1800 mV normal standby [ 1.083587] VDAC: supplied by V2V1 [ 1.089202] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 1.097656] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 1.106079] CLK32KG: [ 1.109771] VANA: 2100 mV normal standby [ 1.114990] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 1.121429] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz [ 1.128570] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 1.135375] Linux media interface: v0.10 [ 1.142364] omap-iommu omap-iommu.0: dsp registered [ 1.147644] omap-iommu omap-iommu.1: ipu registered [ 1.154022] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 1.164031] NetLabel: Initializing [ 1.167633] NetLabel: domain hash size = 128 [ 1.172332] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.177825] NetLabel: unlabeled traffic allowed by default [ 1.185913] Switching to clocksource 32k_counter [ 1.257781] AppArmor: AppArmor Filesystem Enabled [ 1.308227] NET: Registered protocol family 2 [ 1.313537] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.323059] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.334014] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes) [ 1.364746] TCP: Hash tables configured (established 131072 bind 65536) [ 1.371887] TCP: reno registered [ 1.375335] UDP hash table entries: 512 (order: 3, 49152 bytes) [ 1.381927] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes) [ 1.389770] NET: Registered protocol family 1 [ 1.395935] RPC: Registered named UNIX socket transport module. [ 1.402191] RPC: Registered udp transport module. [ 1.407135] RPC: Registered tcp transport module. [ 1.412078] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.419036] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2 [ 1.427947] Trying to unpack rootfs image as initramfs... [ 1.763702] Freeing initrd memory: 3324K [ 2.066101] Registering 23 OPPs [ 2.071899] omap-rproc.1: alias fck already exists [ 2.078765] omap_sr_disable: omap_sr struct for sr_iva not found [ 2.085296] omap_sr_disable: omap_sr struct for sr_iva not found [ 2.091766] omap_sr_disable: omap_sr struct for sr_iva not found [ 2.098297] omap_sr_disable: omap_sr struct for sr_iva not found [ 2.107971] audit: initializing netlink socket (disabled) [ 2.113983] type=2000 audit(2.093:1): initialized [ 2.305297] highmem bounce pool size: 64 pages [ 2.311004] VFS: Disk quotas dquot_6.5.2 [ 2.315429] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.326660] NFS: Registering the id_resolver key type [ 2.333312] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.340545] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc. [ 2.348724] fuse init (API version 7.18) [ 2.354705] Btrfs loaded [ 2.357513] msgmni has been set to 1373 [ 2.365631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.373565] io scheduler noop registered [ 2.377685] io scheduler deadline registered [ 2.382385] io scheduler cfq registered (default) [ 2.389587] OMAP DSS rev 4.0 [ 2.707916] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.739593] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 2.748718] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 2.757598] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.765563] console [ttyO2] enabled, bootconsole disabled [ 2.765563] console [ttyO2] enabled, bootconsole disabled [ 2.778106] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 2.788208] [drm] Initialized drm 1.1.0 20060810 [ 2.817199] brd: module loaded [ 2.834686] loop: module loaded [ 2.838256] (stk) :sysfs entries created [ 2.843383] (stk) : debugfs entries created [ 2.864379] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.871917] tun: Universal TUN/TAP device driver, 1.6 [ 2.877258] tun: (C) 1999-2004 Max Krasnyansky [ 2.884735] PPP generic driver version 2.4.2 [ 2.890686] usbcore: registered new interface driver smsc95xx [ 2.897735] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.905059] ehci-omap.0 supply hsusb0 not found, using dummy regulator [ 2.912414] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.919250] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 2.928802] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 2.949005] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.955902] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.963195] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.970886] usb usb1: Product: OMAP-EHCI Host Controller [ 2.976531] usb usb1: Manufacturer: Linux 3.4.0-2-linaro-lt-omap ehci_hcd [ 2.983764] usb usb1: SerialNumber: ehci-omap.0 [ 2.992034] hub 1-0:1.0: USB hub found [ 2.996215] hub 1-0:1.0: 3 ports detected [ 3.035186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.042480] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 3.048889] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 3.057739] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800 [ 3.141296] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.148529] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.156219] usb usb2: Product: OMAP3 OHCI Host Controller [ 3.161956] usb usb2: Manufacturer: Linux 3.4.0-2-linaro-lt-omap ohci_hcd [ 3.169158] usb usb2: SerialNumber: ohci-omap3.0 [ 3.175781] hub 2-0:1.0: USB hub found [ 3.179809] hub 2-0:1.0: 3 ports detected [ 3.186218] Initializing USB Mass Storage driver... [ 3.191864] usbcore: registered new interface driver usb-storage [ 3.198211] USB Mass Storage support registered. [ 3.204986] mousedev: PS/2 mouse device common for all mice [ 3.215393] twl_rtc twl_rtc: Power up reset detected. [ 3.222015] twl_rtc twl_rtc: Enabling TWL-RTC [ 3.232452] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 3.239624] i2c /dev entries driver [ 3.248962] device-mapper: uevent: version 1.0.3 [ 3.254852] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.264373] sdhci: Secure Digital Host Controller Interface driver [ 3.271087] sdhci: Copyright(c) Pierre Ossman [ 3.279418] omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator [ 3.290313] omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator [ 3.302703] thermal_governor_dev_register:Adding omap_ongpu_governor governor [ 3.310363] thermal_get_slope:Getting slope is not supported for domain gpu [ 3.317779] thermal_get_offset:Getting offset is not supported for domain gpu [ 3.325408] RMH: STM: 956: stm_arm_init [ 3.325469] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 3.337066] RMH: STM device init [ 3.340545] RMH: STM: 808: stm_device_setup [ 3.345001] RMH: STM: 815: stm_probe: base_addr=0x5415a000 regs=0xf00d2000 [ 3.352935] RMH: STM: 823: stm_device_setup: probing device [ 3.358947] RMH: STM: 826: DEVTYPE = 0x0 [ 3.363189] RMH: STM: 836: PID=0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 [ 3.369384] RMH: STM: 843: CID=0x0 0x0 0x0 0x0 [ 3.374328] RMH: STM device init'd [ 3.378265] stm_fw: vendor driver stm_arm registered [ 3.392791] omap_pcm_dummy() init [ 3.397521] OMAP4/5 SoC init [ 3.400573] omap_pcm_dummy() init [ 3.404144] omap_mcpdm_dummy() init [ 3.411590] aess aess: ABE Firmware version 9560 [ 3.419799] omap_sr_disable: omap_sr struct for sr_iva not found [ 3.458129] omap_sr_disable: omap_sr struct for sr_iva not found [ 3.472534] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok [ 3.480926] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok [ 3.487152] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.488769] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.488800] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.510620] mmc0: new SDHC card at address e624 [ 3.512756] hub 1-1:1.0: USB hub found [ 3.513031] hub 1-1:1.0: 5 ports detected [ 3.526611] asoc: snd-soc-dummy-dai <-> Voice mapping ok [ 3.526672] mmcblk0: mmc0:e624 SD04G 3.69 GiB [ 3.537689] mmcblk0: p1 p2 [ 3.543518] asoc: snd-soc-dummy-dai <-> Tones mapping ok [ 3.560150] asoc: snd-soc-dummy-dai <-> Vibra mapping ok [ 3.566864] asoc: snd-soc-dummy-dai <-> MODEM mapping ok [ 3.573303] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok [ 3.580383] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 3.590118] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok [ 3.597900] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok [ 3.603973] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok [ 3.610046] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok [ 3.616088] asoc: twl6040-vib <-> mcpdm-vib mapping ok [ 3.622161] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok [ 3.628936] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok [ 3.635620] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 3.642364] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 3.651672] input: PandaBoardES Headset Jack as /devices/platform/omap-abe-twl6040/sound/card0/input0 [ 3.672363] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 3.688323] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok [ 3.693237] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.695068] mmc1: new SDIO card at address 0001 [ 3.711242] oprofile: using arm/armv7-ca9 [ 3.716278] TCP: cubic registered [ 3.719818] Initializing XFRM netlink socket [ 3.725006] NET: Registered protocol family 10 [ 3.732543] NET: Registered protocol family 17 [ 3.737304] NET: Registered protocol family 15 [ 3.743469] Registering the dns_resolver key type [ 3.748931] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 3.757232] ThumbEE CPU extension supported. [ 3.761871] Registering SWP/SWPB emulation handler [ 3.780303] Power Management for TI OMAP4XX/OMAP5XXX devices. [ 3.786529] hwmod gpmc not found [ 3.790100] sr_init: No PMIC hook to init smartreflex [ 3.795654] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 3.795867] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.796234] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.796691] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.827819] SmartReflex class 1.5 driver: initialized (86400000ms) [ 3.855682] do_calibrate: mpu: Calibration complete: Voltage Nominal=1203000Calib=1010000 margin=0 [ 3.871276] clock: disabling unused clocks to save power [ 3.877197] do_calibrate: iva: Calibration complete: Voltage Nominal=1140000Calib=987520 margin=0 [ 3.886901] do_calibrate: core: Calibration complete: Voltage Nominal=1127000Calib=1012840 margin=13000 [ 3.889068] registered taskstats version 1 [ 3.925109] VANA: incomplete constraints, leaving on [ 3.932342] VDAC: incomplete constraints, leaving on [ 3.939117] VUSB: incomplete constraints, leaving on [ 3.946716] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.955627] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.963012] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.975738] smsc95xx v1.0.4 [ 3.979675] dmm dmm: initialized all PAT entries [ 4.074890] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 0e:60:cf:e5:49:01 [ 4.168029] usb 1-1.2: new low-speed USB device number 4 using ehci-omap [ 4.196502] [drm] Enabling DMM ywrap scrolling [ 4.257995] Console: switching to colour frame buffer device 160x45 [ 4.282684] fb0: omapdrm frame buffer device [ 4.287414] drm: registered panic notifier [ 4.292022] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.299255] [drm] No driver support for vblank timestamp query. [ 4.305908] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 4.313537] ALSA device list: [ 4.316894] #0: PandaBoardES [ 4.320251] #1: OMAPHDMI [ 4.324401] usb 1-1.2: New USB device found, idVendor=0a81, idProduct=0101 [ 4.331909] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.340301] Freeing init memory: 372K [ 4.340332] Write protecting the kernel text section c0008000 - c06d8000 [ 4.370452] usb 1-1.2: Product: USB Keyboard [ 4.381347] usb 1-1.2: Manufacturer: CHESEN Loading, please wait... [ 4.480407] usb 1-1.3: new high-speed USB device number 5 using ehci-omap [ 4.498962] udevd[1348]: starting version 175 Begin: Loading essential drivers ... [ 4.607299] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608 [ 4.648742] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 done. [ 4.676391] usb 1-1.3: Product: USB2.0 Hub Begin: Running /scripts/init-premount ... done. [ 4.754974] hub 1-1.3:1.0: USB hub found Begin: Mounting root file system ... [ 4.831756] hub 1-1.3:1.0: 4 ports detected Begin: Running /scripts/local-top ... done. [ 4.941223] do_calibrate: mpu: Calibration complete: Voltage Nominal=1380000Calib=1210000 margin=0 Begin: Running /scripts/local-premount ... [ 5.152526] usb 1-1.3.3: new low-speed USB device number 6 using ehci-omap done. [ 5.313873] usb 1-1.3.3: New USB device found, idVendor=093a, idProduct=2510 [ 5.335235] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.347198] usb 1-1.3.3: Product: USB Optical Mouse [ 5.355773] usb 1-1.3.3: Manufacturer: PixArt [ 5.369232] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 5.964569] do_calibrate: mpu: Calibration complete: Voltage Nominal=1025000Calib=810000 margin=10000 [ 6.340850] init: ureadahead main process (1481) terminated with status 5 fsck from util-linux 2.20.1 rootfs: Superblock last write time is in the future. (by less than a day, probably due to the hardware clock being incorrectly set). FIXED. rootfs: clean, 141951/193536 files, 467447/773120 blocks [ 10.238677] (stk) :ldisc installation timeout * Starting bluetooth daemon[ OK ] * Starting Mount network filesystems[ OK ] * Starting Failsafe Boot Delay[ OK ] * Starting configure network device security[ OK ] * Stopping Mount network filesystems[ OK ] * Starting configure network device[ OK ] [ 11.253723] (stk) : timed out waiting for ldisc to be un-installed * Starting Bridge socket events into upstart[ OK ] * Starting mDNS/DNS-SD daemon[ OK ] * Starting configure network device[ OK ] * Stopping Failsafe Boot Delay[ OK ] * Starting System V initialisation compatibility[ OK ] * Starting modem connection manager[ OK ] * Starting configure network device security[ OK ] * Starting configure network device security[ OK ] * Starting configure network device[ OK ] * Stopping cold plug devices[ OK ] * Stopping log initial device creation[ OK ] * Starting configure network device security[ OK ] * Starting configure virtual network devices[ OK ] * Starting save udev log and update rules[ OK ] * Stopping configure virtual network devices[ OK ] * Stopping save udev log and update rules[ OK ] * Starting CUPS printing spooler/server[ OK ] * Starting network connection manager[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher * Stopping System V initialisation compatibility[ OK ] * Starting System V runlevel compatibility[ OK ] * Starting automatic crash report generation[ OK ] * Starting LightDM Display Manager[ OK ] * Starting save kernel messages[ OK ] * Starting anac(h)ronistic cron[ OK ] * Starting regular background program processing daemon[ OK ] saned disabled; edit /etc/default/saned * Stopping System PulseAudio sound server[ OK ] * Starting crash report submission daemon[ OK ] * Stopping Setup OMAP4 audio and video[ OK ] * Stopping save kernel messages[ OK ] Welcome to Linaro 12.08 (GNU/Linux 3.4.0-2-linaro-lt-omap armv7l) * Documentation: https://wiki.linaro.org/ The programs included with the Linaro system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Linaro comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. [ 19.540283] [ 19.541900] ============================================= [ 19.547729] [ INFO: possible recursive locking detected ] [ 19.553527] 3.4.0-2-linaro-lt-omap #2~ci+120825182553-Ubuntu Tainted: G C O [ 19.561737] --------------------------------------------- [ 19.567565] Xorg/2046 is trying to acquire lock: [ 19.572509] (psPVRSRVMutex){+.+.+.}, at: [] LinuxLockMutex+0xe/0x10 [omapdrm_pvr] [ 19.581726] [ 19.581756] but task is already holding lock: [ 19.588012] (psPVRSRVMutex){+.+.+.}, at: [] LinuxLockMutex+0xe/0x10 [omapdrm_pvr] [ 19.597198] [ 19.597198] other info that might help us debug this: [ 19.604217] Possible unsafe locking scenario: [ 19.604217] [ 19.610595] CPU0 [ 19.613220] ---- [ 19.615844] lock(psPVRSRVMutex); [ 19.619537] lock(psPVRSRVMutex); [ 19.623229] [ 19.623229] *** DEADLOCK *** [ 19.623260] [ 19.629638] May be due to missing lock nesting notation [ 19.629638] [ 19.636932] 2 locks held by Xorg/2046: [ 19.640960] #0: (drm_global_mutex){+.+.+.}, at: [] drm_release+0x21/0x288 [ 19.649475] #1: (psPVRSRVMutex){+.+.+.}, at: [] LinuxLockMutex+0xe/0x10 [omapdrm_pvr] [ 19.659118] [ 19.659118] stack backtrace: [ 19.663879] [] (unwind_backtrace+0x1/0x90) from [] (print_deadlock_bug+0x81/0xac) [ 19.673828] [] (print_deadlock_bug+0x81/0xac) from [] (validate_chain.isra.26+0x341/0x360) [ 19.684600] [] (validate_chain.isra.26+0x341/0x360) from [] (__lock_acquire+0x4d5/0x54e) [ 19.695159] [] (__lock_acquire+0x4d5/0x54e) from [] (lock_acquire+0xbb/0xd8) [ 19.704650] [] (lock_acquire+0xbb/0xd8) from [] (mutex_lock_nested+0x37/0x250) [ 19.714355] [] (mutex_lock_nested+0x37/0x250) from [] (LinuxLockMutex+0xe/0x10 [omapdrm_pvr]) [ 19.725463] [] (LinuxLockMutex+0xe/0x10 [omapdrm_pvr]) from [] (LinuxMMapPerProcessDisconnect+0x16/0x4e [omapdrm_pvr]) [ 19.738891] [] (LinuxMMapPerProcessDisconnect+0x16/0x4e [omapdrm_pvr]) from [] (OSPerProcessPrivateDataDeInit+0x10/0x26 [omapdrm_pvr]) [ 19.753845] [] (OSPerProcessPrivateDataDeInit+0x10/0x26 [omapdrm_pvr]) from [] (PVRSRVDissociateMemFromResmanKM+0x58/0x76 [omapdrm_pvr]) [ 19.768981] [] (PVRSRVDissociateMemFromResmanKM+0x58/0x76 [omapdrm_pvr]) from [] (PVRSRVPerProcessDataDisconnect+0x2a/0x3c [omapdrm_pvr]) [ 19.784179] [] (PVRSRVPerProcessDataDisconnect+0x2a/0x3c [omapdrm_pvr]) from [] (PVRSRVProcessDisconnect+0xc/0xe [omapdrm_pvr]) [ 19.798492] [] (PVRSRVProcessDisconnect+0xc/0xe [omapdrm_pvr]) from [] (PVRSRVRelease+0x5c/0x8c [omapdrm_pvr]) [ 19.811187] [] (PVRSRVRelease+0x5c/0x8c [omapdrm_pvr]) from [] (PVRSRVDrmRelease+0x1a/0x2c [omapdrm_pvr]) [ 19.823394] [] (PVRSRVDrmRelease+0x1a/0x2c [omapdrm_pvr]) from [] (dev_preclose+0x2b/0x54) [ 19.834167] [] (dev_preclose+0x2b/0x54) from [] (drm_release+0x41/0x288) [ 19.843261] [] (drm_release+0x41/0x288) from [] (__fput+0x97/0x154) [ 19.851898] [] (__fput+0x97/0x154) from [] (filp_close+0x41/0x48) [ 19.860321] [] (filp_close+0x41/0x48) from [] (sys_close+0x87/0xc4) [ 19.868957] [] (sys_close+0x87/0xc4) from [] (ret_fast_syscall+0x1/0x52) [ 20.545318] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.553863] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 root@linaro-ubuntu-desktop:~# [ 31.511322] eth0: no IPv6 routers present [ 46.725372] warning: process `colord' used the deprecated sysctl system call with 8.1.2. root@linaro-ubuntu-desktop:~#