U-Boot 2011.06 (Sep 26 2011 - 18:20:34) CPU: Freescale i.MX53 family rev2.1 at 800 MHz Reset cause: POR Board: MX53 LOCO I2C: ready DRAM: 1 GiB CPU: Switch CPU clock to 1GHZ OK DDR: Switch DDR clock to 400MHz OK MMC: FSL_ESDHC: 0, FSL_ESDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: got MAC address from fuse: 00:04:9f:01:b3:79 FECWarning: failed to set MAC address Hit any key to stop autoboot: 3  2  1  0 reading boot.scr 421 bytes read Running bootscript from mmc ... ## Executing script at 70800000 reading uImage 2844824 bytes read reading uInitrd 192491 bytes read ## Booting kernel from Legacy Image at 70000000 ... Image Name: Linux-2.6.38.7+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2844760 Bytes = 2.7 MiB Load Address: 70008000 Entry Point: 70008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 72000000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 192427 Bytes = 187.9 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38.7+ (jenkins-build@ip-10-122-203-249) (gcc version 4.6.2 20110908 (prerelease) (Linaro GCC 4.6-2011.09-1) ) #1 Mon Sep 26 18:57:20 UTC 2011 [ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c5387f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Freescale MX53 LOCO Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 218112 [ 0.000000] Kernel command line: console=tty0 console=ttymxc0,115200n8 rootwait ro earlyprintk rootdelay=1 fixrtc nocompcache di1_primary tve init=/init androidboot.console=ttymxc0 [ 0.000000] [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 352MB 512MB = 864MB total [ 0.000000] Memory: 870512k/870512k available, 14224k reserved, 524288K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xf7e00000 - 0xffe00000 ( 128 MB) [ 0.000000] vmalloc : 0xd6800000 - 0xf4000000 ( 472 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd6000000 ( 352 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .init : 0xc0008000 - 0xc003b000 ( 204 kB) [ 0.000000] .text : 0xc003b000 - 0xc055e000 (5260 kB) [ 0.000000] .data : 0xc055e000 - 0xc05a8480 ( 298 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:368 [ 0.000000] TrustZone Interrupt Controller (TZIC) initialized [ 0.000000] MXC GPIO hardware [ 0.000000] sched_clock: 32 bits at 8MHz, resolution 125ns, wraps every 536870ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000479] Calibrating delay loop... 999.42 BogoMIPS (lpj=4997120) [ 0.260216] pid_max: default: 32768 minimum: 301 [ 0.260437] Security Framework initialized [ 0.260495] AppArmor: AppArmor disabled by boot time parameter [ 0.260582] Mount-cache hash table entries: 512 [ 0.261137] CPU: Testing write buffer coherency: ok [ 0.261461] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.262441] devtmpfs: initialized [ 0.288371] print_constraints: dummy: [ 0.288662] NET: Registered protocol family 16 [ 0.313589] IRAM READY [ 0.313849] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.314503] IMX usb wakeup probe [ 0.314846] IMX usb wakeup probe [ 0.320607] bio: create slab at 0 [ 0.322076] SCSI subsystem initialized [ 0.322757] Freescale USB OTG Driver loaded, $Revision: 1.55 $ [ 0.430956] usbcore: registered new interface driver usbfs [ 0.431135] usbcore: registered new interface driver hub [ 0.431439] usbcore: registered new device driver usb [ 0.432835] da9052_i2c_is_connected - i2c read success.............. [ 0.433326] print_constraints: VDDA: 3200 mV [ 0.435567] print_constraints: DA9052_LDO1: 600 <--> 1800 mV at 1300 mV normal [ 0.436585] print_constraints: DA9052_LDO2: 600 <--> 1800 mV at 1300 mV normal [ 0.437597] print_constraints: DA9052_LDO3: 1725 <--> 3300 mV at 3300 mV normal [ 0.438573] print_constraints: DA9052_LDO4: 1725 <--> 3300 mV at 2775 mV normal [ 0.439585] print_constraints: DA9052_LDO5: 1200 <--> 3600 mV at 1300 mV normal [ 0.440640] print_constraints: DA9052_LDO6: 1200 <--> 3600 mV at 1300 mV normal [ 0.441628] print_constraints: DA9052_LDO7: 1200 <--> 3600 mV at 2750 mV normal [ 0.442629] print_constraints: DA9052_LDO8: 1200 <--> 3600 mV at 1800 mV normal [ 0.443645] print_constraints: DA9052_LDO9: 1250 <--> 3650 mV at 1500 mV normal [ 0.444654] print_constraints: DA9052_LDO10: 1200 <--> 3600 mV at 1300 mV normal [ 0.445664] print_constraints: DA9052_BUCK_CORE: 500 <--> 2075 mV at 1250 mV normal [ 0.446661] print_constraints: DA9052_BUCK_PRO: 500 <--> 2075 mV at 1350 mV normal [ 0.447702] print_constraints: DA9052_BUCK_MEM: 925 <--> 2500 mV at 1500 mV normal [ 0.448722] print_constraints: DA9052_BUCK_PERI: 925 <--> 2500 mV at 2475 mV normal [ 0.451881] IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) [ 0.451954] imx-ipuv3 imx-ipuv3: DI1 is primary [ 0.453047] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.453793] NetLabel: Initializing [ 0.453841] NetLabel: domain hash size = 128 [ 0.453856] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.453935] NetLabel: unlabeled traffic allowed by default [ 0.454127] i2c-core: driver [mc13892] using legacy suspend method [ 0.454157] i2c-core: driver [mc13892] using legacy resume method [ 0.454218] Switching to clocksource mxc_timer1 [ 0.460698] Switched to NOHz mode on CPU #0 [ 0.475557] NET: Registered protocol family 2 [ 0.475802] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.476329] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.477313] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.477885] TCP: Hash tables configured (established 65536 bind 65536) [ 0.477921] TCP reno registered [ 0.477943] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.477974] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.478369] NET: Registered protocol family 1 [ 0.478846] RPC: Registered udp transport module. [ 0.478889] RPC: Registered tcp transport module. [ 0.478910] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.479316] Trying to unpack rootfs image as initramfs... [ 0.495317] Freeing initrd memory: 184K [ 0.495812] Bus freq driver module loaded [ 0.495955] sdram autogating driver module loaded [ 0.495984] Static Power Management for Freescale i.MX5 [ 0.496160] cpaddr = d6840000 suspend_iram_base=d687e000 [ 0.496229] PM driver module loaded [ 0.496260] i.MXC CPU frequency driver [ 0.496534] mxc_dvfs_core_probe [ 0.496596] mxc_dvfs_core_probe: failed to get gp regulator [ 0.496716] DVFS driver module loaded [ 0.497154] audit: initializing netlink socket (disabled) [ 0.497246] type=2000 audit(0.490:1): initialized [ 0.604622] highmem bounce pool size: 64 pages [ 0.605128] ashmem: initialized [ 0.611981] VFS: Disk quotas dquot_6.5.2 [ 0.612377] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.617318] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.617751] msgmni has been set to 676 [ 0.619768] io scheduler noop registered [ 0.619825] io scheduler deadline registered [ 0.620358] io scheduler cfq registered (default) [ 0.622176] _regulator_get: get() with no identifier [ 0.622698] By setting, SII driver will not be enabled [ 0.622794] i2c-core: driver [sii902x] using legacy suspend method [ 0.622817] i2c-core: driver [sii902x] using legacy resume method [ 0.622908] By setting, LDB driver will not be enabled [ 0.624154] imx-ipuv3 imx-ipuv3: Channel already disabled 9 [ 0.624169] imx-ipuv3 imx-ipuv3: Channel already uninitialized 9 [ 0.634423] IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) [ 0.692953] Console: switching to colour frame buffer device 128x48 [ 0.701752] imx-ipuv3 imx-ipuv3: Channel already disabled 7 [ 0.701773] imx-ipuv3 imx-ipuv3: Channel already uninitialized 7 [ 0.712804] imx-ipuv3 imx-ipuv3: Channel already disabled 10 [ 0.712822] imx-ipuv3 imx-ipuv3: Channel already uninitialized 10 [ 0.720460] Serial: IMX driver [ 0.720807] imx-uart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a IMX [ 1.805500] console [ttymxc0] enabled [ 1.822205] brd: module loaded [ 1.833269] loop: module loaded [ 1.840554] NO SATA device is found, relase resource! [ 1.850988] FEC Ethernet Driver [ 1.861540] fec_enet_mii_bus: probed [ 1.869122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.879196] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller [ 1.889202] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 [ 1.924377] fsl-ehci fsl-ehci.0: irq 18, io base 0x53f80000 [ 1.944341] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 [ 1.953964] hub 1-0:1.0: USB hub found [ 1.961049] hub 1-0:1.0: 1 port detected [ 2.074313] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller [ 2.084344] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 [ 2.124370] fsl-ehci fsl-ehci.1: irq 14, io base 0x53f80200 [ 2.144339] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 [ 2.153832] hub 2-0:1.0: USB hub found [ 2.160937] hub 2-0:1.0: 1 port detected [ 2.168701] Initializing USB Mass Storage driver... [ 2.177123] usbcore: registered new interface driver usb-storage [ 2.186346] USB Mass Storage support registered. [ 2.194117] ARC USBOTG Device Controller driver (1 August 2005) [ 2.203994] mousedev: PS/2 mouse device common for all mice [ 2.213787] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.224737] i2c-core: driver [mpr121] using legacy suspend method [ 2.234255] i2c-core: driver [mpr121] using legacy resume method [ 2.243850] i2c-core: driver [synaptics-rmi-ts] using legacy suspend method [ 2.254126] i2c-core: driver [synaptics-rmi-ts] using legacy resume method [ 2.265209] i2c-core: driver [isl29023] using legacy suspend method [ 2.274872] i2c-core: driver [isl29023] using legacy resume method [ 2.286246] using rtc device, mxc_rtc, for alarms [ 2.290975] mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0 [ 2.303896] i2c /dev entries driver [ 2.311642] lirc_dev: IR Remote Control driver registered, major 251 [ 2.321504] IR NEC protocol handler initialized [ 2.329436] IR RC5(x) protocol handler initialized [ 2.337465] IR RC6 protocol handler initialized [ 2.345226] IR JVC protocol handler initialized [ 2.352852] IR Sony protocol handler initialized [ 2.360624] IR RC5 (streamzap) protocol handler initialized [ 2.369372] IR LIRC bridge handler initialized [ 2.377038] Linux video capture interface: v2.00 [ 2.384870] usb 1-1: new low speed USB device number 2 using fsl-ehci [ 2.395253] mxc_v4l2_output mxc_v4l2_output.0: Registered device video0 [ 2.406503] test_power_get_battery_property: some properties deliberately report errors. [ 2.418187] power_supply test_battery: driver failed to report `charge_full' property [ 2.429917] test_power_get_battery_property: some properties deliberately report errors. [ 2.441581] power_supply test_battery: driver failed to report `charge_full' property [ 2.453854] virtual_battery: registered [ 2.461567] check mma8450 chip ID [ 2.570637] mma8450 0-001c: build time Sep 26 2011 18:52:58 [ 2.580197] input: mma8450 as /devices/virtual/input/input1 [ 2.589891] i2c-core: driver [mma8450] using legacy suspend method [ 2.599768] i2c-core: driver [mma8450] using legacy resume method [ 2.609478] add mma8450 i2c driver [ 2.616545] i2c-core: driver [mma8451] using legacy suspend method [ 2.626341] i2c-core: driver [mma8451] using legacy resume method [ 2.635894] add mma8451 i2c driver [ 2.643970] device-mapper: uevent: version 1.0.3 [ 2.653076] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 2.665565] cpuidle: using governor ladder [ 2.673358] cpuidle: using governor menu [ 2.681445] imx-sdma imx-sdma: loaded firmware 1.0 [ 2.694895] imx-sdma imx-sdma: initialized [ 2.702766] sdhci: Secure Digital Host Controller Interface driver [ 2.712654] sdhci: Copyright(c) Pierre Ossman [ 2.720901] mmc0: no vmmc regulator found [ 2.728965] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.0] using DMA [ 2.740109] mmc1: no vmmc regulator found [ 2.748200] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA [ 2.860379] VPU initialized [ 3.178320] usbcore: registered new interface driver usbhid [ 3.187605] usbhid: USB HID core driver [ 3.196151] logger: created 64K log 'log_main' [ 3.204653] logger: created 256K log 'log_events' [ 3.213430] logger: created 64K log 'log_radio' [ 3.222011] logger: created 64K log 'log_system' [ 3.232419] ALSA device list: [ 3.239121] No soundcards found. [ 3.246841] TCP cubic registered [ 3.253528] NET: Registered protocol family 17 [ 3.261720] Registering the dns_resolver key type [ 3.270005] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ 3.282622] ThumbEE CPU extension supported. [ 3.290538] Registering SWP/SWPB emulation handler [ 3.308852] regulator_init_complete: DA9052_BUCK_PERI: incomplete constraints, leaving on [ 3.320834] regulator_init_complete: DA9052_BUCK_MEM: incomplete constraints, leaving on [ 3.332725] regulator_init_complete: DA9052_BUCK_PRO: incomplete constraints, leaving on [ 3.344533] regulator_init_complete: DA9052_BUCK_CORE: incomplete constraints, leaving on [ 3.356382] regulator_init_complete: DA9052_LDO10: incomplete constraints, leaving on [ 3.367821] regulator_init_complete: DA9052_LDO9: incomplete constraints, leaving on [ 3.379235] regulator_init_complete: DA9052_LDO8: incomplete constraints, leaving on [ 3.390552] regulator_init_complete: DA9052_LDO7: incomplete constraints, leaving on [ 3.401691] regulator_init_complete: DA9052_LDO6: incomplete constraints, leaving on [ 3.412846] regulator_init_complete: DA9052_LDO5: incomplete constraints, leaving on [ 3.423911] regulator_init_complete: DA9052_LDO4: incomplete constraints, leaving on [ 3.434795] regulator_init_complete: DA9052_LDO3: incomplete constraints, leaving on [ 3.445759] regulator_init_complete: DA9052_LDO2: incomplete constraints, leaving on [ 3.456702] regulator_init_complete: DA9052_LDO1: incomplete constraints, leaving on [ 3.467556] regulator_init_complete: VDDA: incomplete constraints, leaving on [ 3.477902] mxc_rtc mxc_rtc.0: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.489492] sgtl5000 1-000a: Failed to get supply 'VDDD': -19 [ 3.598937] print_constraints: 1-000a: 850 <--> 1600 mV at 1200 mV normal [ 3.609434] mmc0: new high speed SDHC card at address b368 [ 3.619092] mmcblk0: mmc0:b368 00000 3.74 GiB [ 3.629700] sgtl5000 1-000a: sgtl5000 revision 17 [ 3.643732] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 > [ 3.806021] asoc: sgtl5000 <-> imx-ssi.1 mapping ok [ 3.914626] usb 1-1: device not accepting address 2, error -71 [ 3.924663] input: sgtl5000-audio Headphone Jack as /devices/platform/soc-audio/sound/card0/input2 [ 3.938057] Freeing init memory: 204K [ 4.034516] usb 1-1: new low speed USB device number 3 using fsl-ehci [ 4.243234] test_power_get_battery_property: some properties deliberately report errors. [ 4.254803] power_supply test_battery: driver failed to report `charge_full' property [ 4.399341] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 4.600933] usb 1-1: device descriptor read/all, error -71 [ 4.724331] usb 1-1: new low speed USB device number 4 using fsl-ehci [ 4.761921] usb 1-1: device v045e p0040 is not supported [ 4.775024] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.0/input/input3 [ 4.789501] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-fsl-ehci.0-1/input0 [ 4.924361] usb 2-1: new low speed USB device number 2 using fsl-ehci [ 5.098909] input: Logitech Logitech USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1:1.0/input/input4 [ 5.111692] generic-usb 0003:046D:C315.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-fsl-ehci.1-1/input0 [ 5.130646] usb 1-1: USB disconnect, device number 4 [ 5.260637] usb 1-1: new low speed USB device number 5 using fsl-ehci [ 5.421920] usb 1-1: device v045e p0040 is not supported [ 5.434902] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.0/input/input5 [ 5.449412] generic-usb 0003:045E:0040.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-fsl-ehci.0-1/input0 [ 5.465137] hub 1-0:1.0: suspend error -16 [ 5.699139] EXT4-fs (mmcblk0p5): recovery complete [ 6.054348] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) [ 10.270556] EXT4-fs (mmcblk0p6): recovery complete [ 10.278509] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ 10.309740] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. [ 10.435987] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' # [ 10.945625] warning: `rild' uses 32-bit capabilities (legacy support in use) [ 33.057138] alarm_release: clear alarm, pending 0 [ 33.077605] init: untracked pid 52 exited [ 33.081719] init: untracked pid 56 exited [ 48.014468] usb 1-1: reset low speed USB device number 5 using fsl-ehci [ 48.284456] usb 1-1: device descriptor read/64, error -108 [ 48.676754] usb 1-1: device descriptor read/64, error -108 [ 49.074440] usb 1-1: reset low speed USB device number 5 using fsl-ehci [ 49.344444] usb 1-1: device descriptor read/64, error -108 [ 49.724465] usb 1-1: device descriptor read/64, error -108 [ 50.104483] usb 1-1: reset low speed USB device number 5 using fsl-ehci [ 50.574401] usb 1-1: device not accepting address 5, error -108 [ 50.864412] usb 1-1: reset low speed USB device number 5 using fsl-ehci [ 51.284331] usb 1-1: device not accepting address 5, error -108 [ 51.290449] usb 1-1: USB disconnect, device number 5 [ 51.434360] usb 1-1: new low speed USB device number 6 using fsl-ehci [ 51.554629] usb 1-1: device descriptor read/64, error -108 [ 51.784455] usb 1-1: device descriptor read/64, error -108 [ 52.014443] usb 1-1: new low speed USB device number 7 using fsl-ehci [ 52.144428] usb 1-1: device descriptor read/64, error -108 [ 52.374428] usb 1-1: device descriptor read/64, error -108 [ 52.604479] usb 1-1: new low speed USB device number 8 using fsl-ehci [ 53.024400] usb 1-1: device not accepting address 8, error -108 [ 53.164470] usb 1-1: new low speed USB device number 9 using fsl-ehci [ 53.654372] usb 1-1: device not accepting address 9, error -108 [ 53.660377] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 65.684059] FAT: IO charset iso8859-1 not found