Texas Instruments X-Loader 1.4.4ss (Mar 8 2011 - 08:51:11) Beagle xM Reading boot sector Loading u-boot.bin from mmc U-Boot 2011.06 (Jul 18 2011 - 01:32:57) OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle unknown 0x02 No EEPROM on expansion board Die ID #4bac00029ff800000160a7450701c00a Hit any key to stop autoboot: 10  9  8  7  6  5  4  3  2  1  0 SD/MMC found on device 0 reading boot.scr 389 bytes read Running bootscript from mmc ... ## Executing script at 82000000 reading uImage 3854488 bytes read reading uInitrd 171243 bytes read ## Booting kernel from Legacy Image at 80000000 ... Image Name: Linux-3.0.0-rc7-g3371370 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3854424 Bytes = 3.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 171179 Bytes = 167.2 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Linux version 3.0.0-rc7-g3371370 (jenkins-build@ip-10-80-107-94) (gcc version 4.5.4 20110526 (prerelease) (Linaro GCC 4.5-2011.06-0) ) #1 Mon Jul 18 02:32:03 UTC 2011 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] Reprogramming SDRC clock to 332000000 Hz [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126976 [ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 rootwait ro earlyprintk fixrtc nocompcache vram=12M omapfb.mode=dvi:1280x720MR-16@60 mpurate=auto init=/init androidboot.console=ttyO2 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 500MB = 500MB total [ 0.000000] Memory: 493664k/493664k available, 30624k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0041000 ( 228 kB) [ 0.000000] .text : 0xc0041000 - 0xc0722294 (7045 kB) [ 0.000000] .data : 0xc0724000 - 0xc078cde0 ( 420 kB) [ 0.000000] .bss : 0xc078ce04 - 0xc0d4b5e8 (5882 kB) [ 0.000000] NR_IRQS:410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.003479] Calibrating delay loop... 509.42 BogoMIPS (lpj=1990656) [ 0.080017] pid_max: default: 32768 minimum: 301 [ 0.080383] Security Framework initialized [ 0.080627] Mount-cache hash table entries: 512 [ 0.083923] CPU: Testing write buffer coherency: ok [ 0.092437] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core [ 0.092498] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per [ 0.092559] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup [ 0.106750] omap_hwmod: i2c1: softreset failed (waited 10000 usec) [ 0.119262] omap_hwmod: i2c2: softreset failed (waited 10000 usec) [ 0.131866] omap_hwmod: i2c3: softreset failed (waited 10000 usec) [ 0.138336] print_constraints: dummy: [ 0.139404] NET: Registered protocol family 16 [ 0.140624] GPMC revision 5.0 [ 0.147460] omap_device: omap_gpio.0: new worst case activate latency 0: 91552 [ 0.149536] OMAP GPIO hardware version 2.5 [ 0.150726] OMAP GPIO hardware version 2.5 [ 0.151824] OMAP GPIO hardware version 2.5 [ 0.152954] OMAP GPIO hardware version 2.5 [ 0.154327] OMAP GPIO hardware version 2.5 [ 0.155426] OMAP GPIO hardware version 2.5 [ 0.161285] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.163574] OMAP3 Beagle Rev: unknown 2 [ 0.170104] omap_device: omap_uart.0: new worst case activate latency 0: 30517 [ 0.170349] omap_device: omap_uart.0: new worst case deactivate latency 0: 30517 [ 0.176788] Found NAND on CS0 [ 0.176818] Registering NAND on CS0 [ 0.177703] Unable to get DVI reset GPIO [ 0.178009] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.190338] OMAP DMA hardware revision 5.0 [ 0.254028] bio: create slab at 0 [ 0.261077] SCSI subsystem initialized [ 0.261627] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517 [ 0.263702] omap_device: omap2_mcspi.2: new worst case deactivate latency 0: 30517 [ 0.268188] usbcore: registered new interface driver usbfs [ 0.269104] usbcore: registered new interface driver hub [ 0.269683] usbcore: registered new device driver usb [ 0.273925] omap_device: omap_i2c.1: new worst case activate latency 0: 30517 [ 0.286682] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz [ 0.295166] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.295349] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.296936] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.303985] print_constraints: VUSB1V5: 1500 mV normal standby [ 0.305847] print_constraints: VUSB1V8: 1800 mV normal standby [ 0.307922] print_constraints: VUSB3V1: 3100 mV normal standby [ 0.312713] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.317230] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby [ 0.319183] print_constraints: VDAC: 1800 mV normal standby [ 0.321258] print_constraints: VDVI: 1800 mV normal standby [ 0.323272] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 0.323852] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517 [ 0.324127] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz [ 0.329132] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.334625] cfg80211: Calling CRDA to update world regulatory domain [ 0.337127] Switching to clocksource 32k_counter [ 0.340057] Switched to NOHz mode on CPU #0 [ 0.439910] musb-hdrc: version 6.0, pio, otg (peripheral+host) [ 0.440277] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517 [ 0.440612] omap_device: omap_i2c.1: new worst case activate latency 0: 61035 [ 0.445831] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using PIO, IRQ 92 [ 0.448150] NET: Registered protocol family 2 [ 0.448669] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.450134] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.450836] TCP bind hash table entries: 16384 (order: 7, 589824 bytes) [ 0.459136] TCP: Hash tables configured (established 16384 bind 16384) [ 0.459259] TCP reno registered [ 0.459320] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.459625] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.460449] NET: Registered protocol family 1 [ 0.461242] Trying to unpack rootfs image as initramfs... [ 0.466247] omap_device: musb-omap2430.-1: new worst case deactivate latency 0: 61035 [ 0.482238] Freeing initrd memory: 164K [ 0.482269] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.655578] ashmem: initialized [ 0.656158] VFS: Disk quotas dquot_6.5.2 [ 0.656249] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.658172] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.659973] Btrfs loaded [ 0.660064] msgmni has been set to 964 [ 0.664550] io scheduler noop registered [ 0.664611] io scheduler deadline registered [ 0.664733] io scheduler cfq registered (default) [ 0.727905] OMAP DSS rev 2.0 [ 0.735382] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.741821] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 0.743347] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 0.744812] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 1.532806] console [ttyO2] enabled [ 1.537597] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3 [ 1.572723] brd: module loaded [ 1.589050] loop: module loaded [ 1.598480] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.605438] omap2-nand driver initializing [ 1.610321] No NAND device found. [ 1.614105] No NAND device found. [ 1.618621] OneNAND driver initializing [ 1.629821] usbcore: registered new interface driver asix [ 1.636260] usbcore: registered new interface driver cdc_ether [ 1.643035] usbcore: registered new interface driver smsc75xx [ 1.649566] usbcore: registered new interface driver smsc95xx [ 1.656188] usbcore: registered new interface driver net1080 [ 1.662658] usbcore: registered new interface driver cdc_subset [ 1.669403] usbcore: registered new interface driver zaurus [ 1.675354] cdc_ncm: 01-June-2011 [ 1.679321] usbcore: registered new interface driver cdc_ncm [ 1.685913] usbcore: registered new interface driver usb8xxx [ 1.691925] libertas_sdio: Libertas SDIO driver [ 1.696716] libertas_sdio: Copyright Pierre Ossman [ 1.703674] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.720123] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 3.730529] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 3.738922] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 3.759246] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 3.766357] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.773559] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.781188] usb usb1: Product: OMAP-EHCI Host Controller [ 3.786804] usb usb1: Manufacturer: Linux 3.0.0-rc7-g3371370 ehci_hcd [ 3.793609] usb usb1: SerialNumber: ehci-omap.0 [ 3.802825] hub 1-0:1.0: USB hub found [ 3.807037] hub 1-0:1.0: 3 ports detected [ 3.846099] usbcore: registered new interface driver cdc_wdm [ 3.852111] Initializing USB Mass Storage driver... [ 3.857849] usbcore: registered new interface driver usb-storage [ 3.864227] USB Mass Storage support registered. [ 3.870330] usbcore: registered new interface driver libusual [ 3.877014] usbcore: registered new interface driver usbtest [ 3.896850] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 3.904174] android_usb gadget: Number of LUNs=1 [ 3.909454] lun0: LUN: removable file: (no medium) [ 3.916870] android_usb gadget: android_usb ready [ 3.921844] musb-hdrc musb-hdrc: MUSB HDRC host driver [ 3.928680] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2 [ 3.936737] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.943908] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.951538] usb usb2: Product: MUSB HDRC host driver [ 3.956787] usb usb2: Manufacturer: Linux 3.0.0-rc7-g3371370 musb-hcd [ 3.963592] usb usb2: SerialNumber: musb-hdrc [ 3.970947] hub 2-0:1.0: USB hub found [ 3.975036] hub 2-0:1.0: 1 port detected [ 3.982910] mousedev: PS/2 mouse device common for all mice [ 3.991516] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.006042] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1 [ 4.025024] using rtc device, twl_rtc, for alarms [ 4.029937] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 4.036865] twl_rtc twl_rtc: Power up reset detected. [ 4.042785] twl_rtc twl_rtc: Enabling TWL-RTC. [ 4.048583] i2c /dev entries driver [ 4.055725] Driver for 1-wire Dallas network protocol. [ 4.062835] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517 [ 4.072753] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 4.080413] twl4030_wdt twl4030_wdt: Failed to register misc device [ 4.087097] twl4030_wdt: probe of twl4030_wdt failed with error -16 [ 4.106475] usbcore: registered new interface driver usbhid [ 4.112426] usbhid: USB HID core driver [ 4.118377] logger: created 64K log 'log_main' [ 4.123809] logger: created 256K log 'log_events' [ 4.130126] logger: created 64K log 'log_radio' [ 4.135650] logger: created 64K log 'log_system' [ 4.144744] usbcore: registered new interface driver snd-usb-audio [ 4.156127] ALSA device list: [ 4.159332] No soundcards found. [ 4.162933] oprofile: hardware counters not available [ 4.168273] oprofile: using timer interrupt. [ 4.173370] TCP cubic registered [ 4.176788] Initializing XFRM netlink socket [ 4.181427] NET: Registered protocol family 17 [ 4.186340] NET: Registered protocol family 15 [ 4.191070] lib80211: common routines for IEEE802.11 drivers [ 4.197143] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 4.242187] clock: disabling unused clocks to save power [ 4.252258] fbcvt: 1280x720@60: CVT Name - .921M9-R [ 4.280639] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 4.289459] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 4.300659] Freeing init memory: 228K [ 4.550048] mmc0: new SDHC card at address b368 [ 4.560791] mmcblk0: mmc0:b368 USD 3.75 GiB (ro) [ 4.581970] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 4.739562] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.763458] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. [ 4.804412] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 4.832916] init: cannot execve('/system/etc/init.omap3.sh'): Permission denied [ 4.848480] adb_open # [ 5.314605] warning: `rild' uses 32-bit capabilities (legacy support in use)