Boot Android on SabreLite <6>warning: `rild' uses 32-bit capabilities (legacy support in use)

[Alexandre Delove]

Hello,

I am trying to put android on a sabrelite, i used this : https://wiki.linaro.org/Boards/MX6QSabreLite?action=AttachFile&do=view&target=iMX6DQ_SPI_to_SD_loader_binaries_rev1.0.zip

And this android: http://releases.linaro.org/12.03/android/images/imx6-ics-gcc47-freescalelt-stable-open/

But when i boot the card, there is this error on minicom:

<6>Machine: Freescale i.MX6 Quad (Device Tree), model: Freescale i.MX6 Quad SABRE Lite Board
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.2.0+ (jenkins-build@ip-10-224-54-183) (gcc version 4.6.3 (Linaro GCC 4.6-2012.03) ) #1 SMP PREEMPT Mon Mar 26 15:12:12 UTC 2012
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Freescale i.MX6 Quad (Device Tree), model: Freescale i.MX6 Quad SABRE Lite Board
<6>bootconsole [earlycon0] enabled
[ 0.000000] bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>On node 0 totalpages: 229376
<7>free_area_init_node: node 0, pgdat c0803820, node_mem_map c0987000
<7> Normal zone: 1584 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 178640 pages, LIFO batch:31
<7> HighMem zone: 720 pages used for memmap
<7> HighMem zone: 48432 pages, LIFO batch:15
<6>PERCPU: Embedded 8 pages/cpu @c1296000 s10688 r8192 d13888 u32768
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1296000 s10688 r8192 d13888 u32768
<7>pcpu-alloc: s10688 r8192 d13888 u32768 alloc=8*4096
<7>pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227072
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227072
<5>Kernel command line: console=ttymxc0,115200n8 rootwait ro earlyprintk rootdelay=1 fixrtc nocompcache di1_primary tve init=/init androidboot.console=ttymxc0
[ 0.000000] Kernel command line: console=ttymxc0,115200n8 rootwait ro earlyprintk rootdelay=1 fixrtc nocompcache di1_primary tve init=/init androidboot.console=ttymxc0
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory:[ 0.000000] Memory: 896MB 896MB = 896MB total
 = 896MB total
<5>Memory: 897324k/897324k available, 151252k reserved, 196608K highmem
[ 0.000000] Memory: 897324k/897324k available, 151252k reserved, 196608K highmem
<5>Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    vmalloc : 0xec800000 - 0xf4000000 ( 120 MB)
    lowmem : 0xc0000000 - 0xec000000 ( 704 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
      .text : 0xc0008000 - 0xc077027c (7585 kB)
      .init : 0xc0771000 - 0xc07ba9c0 ( 295 kB)
      .data : 0xc07bc000 - 0xc0805f70 ( 296 kB)
       .bss : 0xc0805f94 - 0xc0986770 (1538 kB)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xec800000 - 0xf4000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc077027c (7585 kB)
[ 0.000000] .init : 0xc0771000 - 0xc07ba9c0 ( 295 kB)
[ 0.000000] .data : 0xc07bc000 - 0xc0805f70 ( 296 kB)
[ 0.000000] .bss : 0xc0805f94 - 0xc0986770 (1538 kB)
<6>Preemptible hierarchical RCU implementation.
[ 0.000000] Preemptible hierarchical RCU implementation.
<6>NR_IRQS:432
[ 0.000000] NR_IRQS:432
<6>L310 cache controller enabled
[ 0.000000] L310 cache controller enabled
<6>l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
[ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
<6>sched_clock: 32 bits at 8MHz, resolution 121ns, wraps every 520602ms
[ 0.000000] sched_clock: 32 bits at 8MHz, resolution 121ns, wraps every 520602ms
<6>Console: colour dummy device 80x30
[ 0.000000] Console: colour dummy device 80x30
<3>ram_console: buffer (null), invalid size 0, datasize 4294967284
[ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284
<6>Calibrating delay loop... [ 0.024213] Calibrating delay loop... <c>1581.05 BogoMIPS (lpj=7905280)
1581.05 BogoMIPS (lpj=7905280)
<6>pid_max: default: 32768 minimum: 301
[ 0.121269] pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
[ 0.129885] Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: [ 0.143932] CPU: Testing write buffer coherency: ok
ok
<6>ftrace: allocating 20020 entries in 59 pages
[ 0.153621] ftrace: allocating 20020 entries in 59 pages
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.192278] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>Calibrating local timer... [ 0.200777] Calibrating local timer... 396.20MHz.
396.20MHz.
<6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.267415] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
CPU1: Booted secondary processor
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
<6>CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
<6>CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>Brought up 4 CPUs
[ 0.373839] CPU1: Booted secondary processor
[ 0.415043] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.453865] CPU2: Booted secondary processor
[ 0.495085] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.533901] CPU3: Booted secondary processor
[ 0.575124] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.577106] Brought up 4 CPUs
<6>SMP: Total of 4 processors activated (6324.22 BogoMIPS).
[ 0.615834] SMP: Total of 4 processors activated (6324.22 BogoMIPS).
<6>devtmpfs: initialized
[ 0.625711] devtmpfs: initialized
<6>print_constraints: dummy:
[ 0.638653] print_constraints: dummy:
<6>NET: Registered protocol family 16
[ 0.646375] NET: Registered protocol family 16
<7>gpiochip_find_base: found new base at 224
<7>gpiochip_find_base: found new base at 192
<7>gpiochip_find_base: found new base at 160
<7>gpiochip_find_base: found new base at 128
<7>gpiochip_find_base: found new base at 96
<7>gpiochip_find_base: found new base at 64
<7>gpiochip_find_base: found new base at 32
<4>audmux_v2 21d8000.audmux: audmux_v2_probe: cannot get clock: 0
[ 0.705210] audmux_v2 21d8000.audmux: audmux_v2_probe: cannot get clock: 0
<6>cpaddr = ec880000 suspend_iram_base=ec826000
[ 0.723472] cpaddr = ec880000 suspend_iram_base=ec826000
<6>No ATAGs?[ 0.729992] No ATAGs?<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

[ 0.739107] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
<6>hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.752301] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>bio: create slab <bio-0> at 0
[ 0.790526] bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
[ 0.800239] SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
[ 0.813019] usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
[ 0.823296] usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
[ 0.833028] usbcore: registered new device driver usb
<6>imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.871875] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
<6>imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.901885] imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
<6>Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.915796] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>Switching to clocksource mxc_timer1
[ 0.927212] Switching to clocksource mxc_timer1
<6>NET: Registered protocol family 2
[ 0.984181] NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.995027] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.009347] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 1.024376] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
[ 1.037797] TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
[ 1.046632] TCP reno registered
<6>UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.054762] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.066148] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>NET: Registered protocol family 1
[ 1.076308] NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
[ 1.086165] RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
[ 1.095891] RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
[ 1.104360] RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.114589] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>Trying to unpack rootfs image as initramfs...
[ 1.125767] Trying to unpack rootfs image as initramfs...
<6>Freeing initrd memory: 192K
[ 1.148264] Freeing initrd memory: 192K
<6>i.MXC CPU frequency driver
[ 1.155616] i.MXC CPU frequency driver
<6>audit: initializing netlink socket (disabled)
[ 1.164543] audit: initializing netlink socket (disabled)
<5>type=2000 audit(1.090:1): initialized
[ 1.173772] type=2000 audit(1.090:1): initialized
highmem bounce pool size: 64 pages
[ 1.198374] highmem bounce pool size: 64 pages
<6>ashmem: initialized
[ 1.205578] ashmem: initialized
<6>Btrfs loaded
[ 1.213173] Btrfs loaded
<6>msgmni has been set to 1368
[ 1.218642] msgmni has been set to 1368
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.230112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>io scheduler noop registered
[ 1.240526] io scheduler noop registered
<6>io scheduler deadline registered
[ 1.247793] io scheduler deadline registered
<6>io scheduler cfq registered (default)
[ 1.255942] io scheduler cfq registered (default)
<6>mxc_sdc_fb 0.fb: register mxc display driver ldb
[ 1.268783] mxc_sdc_fb 0.fb: register mxc display driver ldb
<3>_regulator_get: get() with no identifier
[ 1.278526] _regulator_get: get() with no identifier
<4>imx-ipuv3 imx-ipuv3.1: Channel already disabled 9
<4>imx-ipuv3 imx-ipuv3.1: Channel already uninitialized 9
<6>imx-ipuv3 imx-ipuv3.1: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[ 1.288436] imx-ipuv3 imx-ipuv3.1: Channel already disabled 9
[ 1.293594] imx-ipuv3 imx-ipuv3.1: Channel already uninitialized 9
[ 1.319059] imx-ipuv3 imx-ipuv3.1: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
<6>Console: switching to colour frame buffer device 128x48
[ 1.370839] Console: switching to colour frame buffer device 128x48
<4>imx-ipuv3 imx-ipuv3.1: Channel already disabled 10
<4>imx-ipuv3 imx-ipuv3.1: Channel already uninitialized 10
[ 1.392261] imx-ipuv3 imx-ipuv3.1: Channel already disabled 10
[ 1.397531] imx-ipuv3 imx-ipuv3.1: Channel already uninitialized 10
<6>mxc_sdc_fb 1.fb: register mxc display driver hdmi
[ 1.417951] mxc_sdc_fb 1.fb: register mxc display driver hdmi
<6>mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[ 1.429712] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
<4>imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
<4>imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
[ 1.441523] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
[ 1.446677] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
<4>imx-ipuv3 imx-ipuv3.0: Channel already disabled 10
<4>imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 10
[ 1.479421] imx-ipuv3 imx-ipuv3.0: Channel already disabled 10
[ 1.484663] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 10
<6>imx-sdma 20ec000.sdma: loaded firmware 1.1
mx 1.505212] imx-sdma 20ec000.sdma: loaded firmware <61.>i1
-sdma 20ec000.sdma: initialized
[ 1.51384<65]>S iemrxia-lsd: maI M2X 0decri00v0e.r
dma:<6 i>2n1ite8ia00li0z.uedar s
 ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
[ 1.518822] Serial: IMX driver
[ 1.525956] 21e8000.uart: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
<6>imx-ocotp 21bc000.ocotp: initialized
[ 1.757928] imx-ocotp 21bc000.ocotp: initialized
<6>brd: module loaded
[ 1.779632] brd: module loaded
<6>loop: module loaded
[ 1.792735] loop: module loaded
<6>No sata disk, enter into PDDQ mode.
[ 2.403868] No sata disk, enter into PDDQ mode.
<4>m25p80 spi32766.0: found sst25vf016b, expected m25p32
[ 2.417073] m25p80 spi32766.0: found sst25vf016b, expected m25p32
<6>m25p80 spi32766.0: sst25vf016b (2048 Kbytes)
[ 2.427762] m25p80 spi32766.0: sst25vf016b (2048 Kbytes)
<6>spi_imx 2008000.ecspi: probed
[ 2.437353] spi_imx 2008000.ecspi: probed
<6>FEC Ethernet Driver
[ 2.445074] FEC Ethernet Driver
<6>fec_enet_mii_bus: probed
[ 2.468321] fec_enet_mii_bus: probed
<6>usbcore: registered new interface driver asix
[ 2.477815] usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
[ 2.488344] usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver smsc95xx
[ 2.499232] usbcore: registered new interface driver smsc95xx
<6>usbcore: registered new interface driver net1080
[ 2.509931] usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver cdc_subset
[ 2.520794] usbcore: registered new interface driver cdc_subset
<6>usbcore: registered new interface driver zaurus
[ 2.531579] usbcore: registered new interface driver zaurus
<6>cdc_ncm: 04-Aug-2011
[ 2.539488] cdc_ncm: 04-Aug-2011
<6>usbcore: registered new interface driver cdc_ncm
[ 2.547671] usbcore: registered new interface driver cdc_ncm
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.559531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
<6>mxc-ehci ehci-mxc.0: initializing i.MX USB Controller
[ 2.576281] mxc-ehci ehci-mxc.0: initializing i.MX USB Controller
<6>mxc-ehci ehci-mxc.0: Freescale On-Chip EHCI Host Controller
[ 2.617528] mxc-ehci ehci-mxc.0: Freescale On-Chip EHCI Host Controller
<6>mxc-ehci ehci-mxc.0: new USB bus registered, assigned bus number 1
[ 2.630868] mxc-ehci ehci-mxc.0: new USB bus registered, assigned bus number 1
<7>mxc-ehci ehci-mxc.0: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1
<7>mxc-ehci ehci-mxc.0: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park
<7>mxc-ehci ehci-mxc.0: park 0
<7>mxc-ehci ehci-mxc.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
<7>mxc-ehci ehci-mxc.0: ...powerdown ports...
<6>mxc-ehci ehci-mxc.0: irq 75, io mem 0x02184000
[ 2.696424] mxc-ehci ehci-mxc.0: irq 75, io mem 0x02184000
<7>mxc-ehci ehci-mxc.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
<6>mxc-ehci ehci-mxc.0: USB 2.0 started, EHCI 1.00
[ 2.726489] mxc-ehci ehci-mxc.0: USB 2.0 started, EHCI 1.00
<7>usb usb1: default language 0x0409
<7>usb usb1: udev 1, busnum 1, minor = 0
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.745089] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.758194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: Freescale On-Chip EHCI Host Controller
[ 2.770943] usb usb1: Product: Freescale On-Chip EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 3.2.0+ ehci_hcd
[ 2.781861] usb usb1: Manufacturer: Linux 3.2.0+ ehci_hcd
<6>usb usb1: SerialNumber: ehci-mxc.0
[ 2.790780] usb usb1: SerialNumber: ehci-mxc.0
<7>usb usb1: usb_probe_device
<7>usb usb1: configuration #1 chosen from 1 choice
<7>usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>hub 1-0:1.0: usb_probe_interface
<7>hub 1-0:1.0: usb_probe_interface - got id
<6>hub 1-0:1.0: USB hub found
[ 2.818335] hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
[ 2.825097] hub 1-0:1.0: 1 port detected
<7>hub 1-0:1.0: standalone hub
<7>hub 1-0:1.0: individual port power switching
<7>hub 1-0:1.0: individual port over-current protection
<7>hub 1-0:1.0: Single TT
<7>hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>hub 1-0:1.0: power on to power good time: 20ms
<7>hub 1-0:1.0: local power source is good
<7>hub 1-0:1.0: enabling power on all ports
<6>mxc-ehci ehci-mxc.1: initializing i.MX USB Controller
[ 2.866881] mxc-ehci ehci-mxc.1: initializing i.MX USB Controller
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<6>mxc-ehci ehci-mxc.1: Freescale On-Chip EHCI Host Controller
[ 2.967517] mxc-ehci ehci-mxc.1: Freescale On-Chip EHCI Host Controller
<6>mxc-ehci ehci-mxc.1: new USB bus registered, assigned bus number 2
[ 2.980895] mxc-ehci ehci-mxc.1: new USB bus registered, assigned bus number 2
<7>mxc-ehci ehci-mxc.1: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1
<7>mxc-ehci ehci-mxc.1: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park
<7>mxc-ehci ehci-mxc.1: park 0
<7>mxc-ehci ehci-mxc.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<7>mxc-ehci ehci-mxc.1: ...powerdown ports...
<6>mxc-ehci ehci-mxc.1: irq 72, io mem 0x02184200
[ 3.046426] mxc-ehci ehci-mxc.1: irq 72, io mem 0x02184200
<7>mxc-ehci ehci-mxc.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
<6>mxc-ehci ehci-mxc.1: USB 2.0 started, EHCI 1.00
[ 3.076482] mxc-ehci ehci-mxc.1: USB 2.0 started, EHCI 1.00
<7>usb usb2: default language 0x0409
<7>usb usb2: udev 1, busnum 2, minor = 128
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.095229] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.108335] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: Freescale On-Chip EHCI Host Controller
[ 3.121085] usb usb2: Product: Freescale On-Chip EHCI Host Controller
<6>usb usb2: Manufacturer: Linux 3.2.0+ ehci_hcd
[< 6 >u s 3b .1us32b02:04 S]e urisbal uNsumb2be:r M: anehufcai-ctmxucre.1r:
sLinux 3.<72.>u0s+ b ehucsib2_:hc ud
probe_device
e< 7 >u s 3b .1us38b82:07 c]o unfsbig uusrab2ti:o Sn er#1ia lchNuosmeben r:fr eohm ci1 -cmxhoc.ic1

<7>usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>hub 2-0:1.0: usb_probe_interface
<7>hub 2-0:1.0: usb_probe_interface - got id
<6>hub 2-0:1.0: USB hub found
[ 3.167734] hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
[ 3.174479] hub 2-0:1.0: 1 port detected
<7>hub 2-0:1.0: standalone hub
<7>hub 2-0:1.0: individual port power switching
<7>hub 2-0:1.0: individual port over-current protection
<7>hub 2-0:1.0: Single TT
<7>hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>hub 2-0:1.0: power on to power good time: 20ms
<7>hub 2-0:1.0: local power source is good
<7>hub 2-0:1.0: enabling power on all ports
<6>usbcore: registered new interface driver cdc_wdm
[ 3.216283] usbcore: registered new interface driver cdc_wdm
<6>Initializing USB Mass Storage driver...
[ 3.225903] Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
[ 3.236145] usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
[ 3.245860] USB Mass Storage support registered.
<6>usbcore: registered new interface driver libusual
[ 3.255553] usbcore: registered new interface driver libusual
<6>usbcore: registered new interface driver usbtest
[ 3.266283] usbcore: registered new interface driver usbtest
<3>egalax_ts 2-0004: egalax_ts: failed to read firmware version
[ 3.278217] egalax_ts 2-0004: egalax_ts: failed to read firmware version
<4>egalax_ts: probe of 2-0004 failed with error -5
[ 3.289591] egalax_ts: probe of 2-0004 failed with error -5
<6>using rtc device, 20cc000.snvs, for alarms[ 3.301889] using rtc device, 20cc000.snvs, for alarms<7>mxc-ehci ehci-mxc.1: GetStatus port:1 status 10001803 8 ACK POWER sig=j CSC CONNECT

<7>hub 2-0:1.0: port 1: status 0101 change 0001
<6>snvs_rtc 20cc000.snvs: rtc core: registered 20cc000.snvs as rtc0
[ 3.325350] snvs_rtc 20cc000.snvs: rtc core: registered 20cc000.snvs as rtc0
<6>i2c /dev entries driver
[ 3.335317] i2c /dev entries driver
<6>Linux video capture interface: v2.00
[ 3.343725] Linux video capture interface: v2.00
<6>mxc_v4l2_output v4l2-out.5: V4L2 device registered as video16
[ 3.354962] mxc_v4l2_output v4l2-out.5: V4L2 device registered as video16
<6>mxc_v4l2_output v4l2-out.5: V4L2 device registered as video17
[ 3.368010] mxc_v4l2_output v4l2-out.5: V4L2 device registered as video17
<6>mxc_v4l2_output v4l2-out.5: V4L2 device registered as video18
[ 3.381015] mxc_v4l2_output v4l2-out.5: V4L2 device registered as video18
<6>mxc_v4l2_output v4l2-out.5: V4L2 device registered as video19
[ 3.394026] mxc_v4l2_output v4l2-out.5: V4L2 device registered as video19
<6>Driver for 1-wire Dallas network protocol.
[ 3.405257] Driver for 1-wire Dallas network protocol.
<6>imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
[ 3.418962] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
<7>hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: <email address hidden>
[ 3.444936] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: <email address hidden>
<4>clk_reg_cpufreq: regulator cpu get failed.
[ 3.457634] clk_reg_cpufreq: regulator cpu get failed.
<6>cpuidle: using governor ladder
[ 3.466312] cpuidle: using governor ladder
<6>cpuidle: using governor menu
[ 3.473391] cpuidle: using governor menu
<6>sdhci: Secure Digital Host Controller Interface driver
[ 3.483262] sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
<7>mxc-ehci ehci-mxc.1: port 1 high speed
[< 7> mx c3.-e49hc28i8 e3]hc isd-mhcxci:. 1:Co GpeyrtSigtahtt(usc) poPirte:rr1 e stOsastumas n1
01205 12 ACK POWER sig=se0 LPM PE CONNECT
<6>sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.514026] sdhci-pltfm: SDHCI platform and OF driver helper
<7>mxc: set GPIO 32 to high trigger
<4>sdhci-esdhc-imx 2198000.usdhc: vmmc-supply property in node /soc/aips-bus@02100000/usdhc@02198000 references invalid phandle[<6 > m mc3.0:5 34no64 v6]m mcsd rhecigu-elasdthorc- fiomxun 2d
8000<.7>usRdeghci:st vermemcd -sluepd pdlyev pircoe:p ermmtyc 0i::n 19
ode /soc/aips-bu<s6@>m02mc1000: 00S0D/HCuIsd chco@n0tr2o19ll8e00r 0o rn ef21er9e80nc00e.s usindhvacl [id21 9ph80an00dl.eusdhc] using DMA

>[m xc : 3.s5et40 G5P87IO] 1mm9c8 0t: o nohi vgmh mctr ireggguerla
or<4 >fosudhndci t
c@ dh c- i3.mx55 827197c0]00 m0m.cus0d: hcSD:H CvmIm cco-sntupropllyle prr oopn er21t9y 80in0 0.nousdedh c/s [oc2/19ai80ps00-.buuss@d0hc21] 00us0i00ng/u sDMdhA
0219c000 references invalid phandle<6>usb 2-1: new high-speed USB device number 2 using mxc-ehci
<6>mmc1: no vmmc regulator found
[ 3<7.5>8Re47gi1s5]te sredhdc li-ede sddehcvi-icme:x m2m19c1c0::00
usdhc: vmmc-supp<l6>y mmpcr1o:pe SrtDyHC iI nc nonodtre o/llsoerc /aonip 2s-1b9cus00@002.u10sd00h0c 0/[2u1sd9chc00@002.u19sdch00c]0 uresfinerge DncMAe
6nvalid phandle< s
VP[U i n3it.5ia9l02iz27ed]
sb 2-1: n<7e>w Rehigighs-tespreeded l UedSB dedevivicec:e Hnueambretbr ea2t u
sing mxc-ehci
[ 3.593204] mmc1: no vmmc regulator found
[ 3.613059<6]> musmcb1c:or eSD: HCreI gicostnterreold lnerew o in n2te19rfca00ce0. dusrdivhcer [2us19bhc0i0d
I<6sd>uhsc]bh uisdi:n UgS DB MAH 0.
c[ or e 3dr.i61ve77r5
] VPU init<i6a>lliogzgeder
 created 256K log 'log_main'
[ <6 >3.lo64gg0e41r:4] c urseabcteodre 2: 56reKg lisogt er'ledog n_eevw enitnts'er
face d<r6i>lveogrg uersb:h icrde
e[d 2 536K.6 l4o59g 82'l] oug_sbrahdidio: '
a HID< 6c>looregg derri:v cerre US
te[ d 25 63.K 65l1o2g 0'2]lo glo_sggysert:e m'c
ated 256K log 'log_main' re
[ 3.658789] logger: creat<e3>d sg2t56l5K 00lo0g 0 '-0l0og0a_e:v Fenaitls'ed
to[ g et 3.su66p6p2ly7 1]'V lDoDgA'g:er -: 1c9r
0ated <625>p6Kr inlot_gc 'onlostg_rraiadntiso':
-0[ 00 a :3 8.5670 39<2-7->] l16og0g0e mrV: acrte a12t0ed0 2m5V6 nKo lrmoga l'
00_<s3>yssgtteml5' l
0 0-000a: Failed to get supply 'VDDA': -19
[ <3 3>s.6g8tl8050404]0 s0-gt0l0050a:0 0 Fa0-il00e0d a:to Fareilquede stto s ugeppt lisueps:pl -y1 '9
0<A3'>s:g -tl195 VD
 [ 0- 00 30a.7:0 a00so5c0]: pfariinlet_d ctono stprraoibne tsCO:D 0EC-0 s00gatl: 5080500. <0---0>00 1a:6 00-1 m9
 t< 3>12a0so0 c:m V fanoilrmead l to V
in[ st a nt3i.a70t5e7 c9a2]rd s gstgtll5050000 00-a-u00di0ao:: -F1ai9
d to get <6s>uAppLSlyA 'deVvDDicA'e: li-s19t: le

[<6 > 3No.7 s1o52un9d4c] arsgdtsl f5o00un0 d0.-
ca0a: Fai<6le>od ptroo firleqe:ue usts insug paplrmie/as:r mv-179-
9
 <7 > 3u.s7b 2274-173:] udsegtv l520,0 b0u 0sn-0u0m0 2a,: masioncor: f= ai1l2e9
 t<o6> pusrbo be2 -C1:OD NEeC w sgUStlB5 d00ev0i.0ce-0 f00oaun: d,- 19id d
n[ d or = 304.72347, 4i79dP] raosduocc:t= f2a5i13l
0<t6>o usibns 2ta-1nt:i Natewe cUSarB d dsevgticle50 s00tr-aiungdis:o : Mf-1r=9
P[r o du 3ct.=740,20 S03e]ri AaLlSNuAm dbeevri=c0
 list: e
[ <6 >T3C.7P 4c67u2bi7c] r eNgios steournedd
: 7ds>u fsob un2-d1. ca
us[ b_ pr 3o.be75_d3e25vi3]ce o
k 6of>Iilnie:t iualsiinzig nagr XmF/aRMrm vn7et-lcain9
so[c ke t
7<772>0u4s4b ] 2-u1sb: 2co-1n:fi Nguerw atUSioB nd #ev1 icceho fseounn fd,ro mid 1Ve cndhooir=ce0
in <i7>duPrsbod 2uc-t1=: 2a51dd3 42
g [ 2 -1 :13..70 84(c22o5nf] igu sb#1 2, -1i:nt Nerefw acUSe B 0d)
ice s<t7>rihnugb s2: -1Mf:r1=.00:, uPsrob_duprcto=be0,_i nSeterirfalaNceum
ub<7r=>h0
 2-1:1.0: usb_probe_interface - got id
[< 6> hu 3b .278-194:175.]0: T UCSP B cuhubibc f rouengid
ere<6d> st
b[ 2 -1 :3.1.800:11 33 2]po rIntsit diaelteizctiengd
an<7R>M hunebt 2li-1n:k 1.so0:ck estt
dalone hub
tc7 >h ub3. 82-361:2111.0] : huibnd 2iv-i1:du1.al0: poUSrtB phoubwe fro uswnid
hi[ n g
rr7.>84hu23b0 21]-1 :hu1.b 0:2- 1in:1di.v0:id 3ua plo prtorst d oetveecrt-cedu
nt protection
<7>hub 2-1:1.0: TT per port
<7>hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
<7>hub 2-1:1.0: power on to power good time: 100ms
<7>hub 2-1:1.0: local power source is good
<7>hub 2-1:1.0: enabling power on all ports
<7>hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002
<6>NET: Registered protocol family 10
[ 3.893887] NET: Registered protocol family 10
<7>usb 2-1: link qh256-0001/e89dfb60 start 1 [1/0 us]
<7>hub 2-1:1.0: state 7 ports 3 chg 0000 evt 0000
<6>IPv6 over IPv4 tunneling driver
[ 3.995461] IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
[ 4.004293] NET: Registered protocol family 17
<6>NET: Registered protocol family 15
[ 4.012301] NET: Registered protocol family 15
<5>Registering the dns_resolver key type
[ 4.020585] Registering the dns_resolver key type
<6>VFP support v0.3: [ 4.027400] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
implementor 41 architecture 3 part 30 variant 9 rev 4
<6>ThumbEE CPU extension supported.
[ 4.121079] ThumbEE CPU extension supported.
<5>Registering SWP/SWPB emulation handler
[ 4.129231] Registering SWP/SWPB emulation handler
<6>turn off boot console earlycon0
[ 4.137318] turn off boot console earlycon0
<6>snvs_rtc 20cc000.snvs: setting system clock to 1970-01-01 00:00:00 UTC (0)
<4>Warning: unable to open an initial console.
<6>Freeing init memory: 292K
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>init: cannot open '/initlogo.rle'
<6>mmc0: new high speed SDHC card at address 0007
<6>mmcblk0: mmc0:0007 SD4GB 3.67 GiB
<6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
<6>EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend, wakeup 1
<7>mxc-ehci ehci-mxc.0: suspend root hub
<7>hub 2-1:1.0: hub_suspend
<7>usb 2-1: unlink qh256-0001/e89dfb60 start 1 [1/0 us]
<7>usb 2-1: usb auto-suspend, wakeup 1
<6>EXT4-fs (mmcblk0p5): recovery complete
<6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
<7>hub 2-0:1.0: hub_suspend
<7>usb usb2: bus auto-suspend, wakeup 1
<7>mxc-ehci ehci-mxc.1: suspend root hub
<6>EXT4-fs (mmcblk0p6): recovery complete
<6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
<4>Disabling lock debugging due to kernel taint
<3>init: service 'console' requires console
<3>init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<3>init: service 'console' requires console
<6>warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>request_suspend_state: wakeup (3->0) at 30639167390 (1970-01-02 00:00:12.348317936 UTC)
<6>alarm_release: clear alarm, pending 0
<6>alarm_release: clear alarm, pending 0
<6>request_suspend_state: wakeup (0->0) at 42653210540 (1970-01-02 00:00:24.362360480 UTC)
<3>init: untracked pid 1052 exited

Then it starts to show that with different pid:
<6>alarm_release: clear alarm, pending 0
<6>request_suspend_state: wakeup (0->0) at 63993607627 (1970-01-02 00:00:45.702759991 UTC)
<3>init: untracked pid 1156 exited
<3>init: untracked pid 1155 exited

[Chase Qi (chase-qi)]

Migrated to bugzilla:
https://bugs.linaro.org/show_bug.cgi?id=420