| 2013-01-08 11:25:28 |
Botao |
bug |
|
|
added bug |
| 2013-01-15 13:12:23 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up. |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158 |
|
| 2013-01-24 02:58:51 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167 |
|
| 2013-01-30 12:02:12 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1 |
|
| 2013-02-07 07:40:06 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179 |
|
| 2013-02-14 10:43:22 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185 |
|
| 2013-02-19 01:22:57 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191 |
|
| 2013-02-25 04:46:43 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2 |
|
| 2013-03-21 04:59:32 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220 |
|
| 2013-03-27 07:33:33 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1 |
|
| 2013-04-11 10:26:41 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250 |
|
| 2013-04-23 04:20:01 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5 |
|
| 2013-05-22 06:36:38 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291 |
|
| 2013-06-19 15:22:38 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325 |
|
| 2013-06-19 15:22:56 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325 |
|
| 2013-06-24 04:30:40 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1 |
|
| 2013-06-24 04:31:26 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1 |
|
| 2013-07-23 01:54:54 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2 |
|
| 2013-08-20 08:16:18 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59 |
|
| 2013-08-27 12:22:47 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1 |
|
| 2013-08-27 12:22:59 |
Botao |
bug |
|
|
added subscriber vishal |
| 2013-08-27 12:23:09 |
Botao |
bug |
|
|
added subscriber Soumya Basak |
| 2013-09-18 07:21:31 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=85 |
|
| 2013-09-24 07:36:44 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=85 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=85
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.09-release/#build=6 |
|
| 2013-09-24 07:37:36 |
Botao |
attachment added |
|
Monitor_Display_After_Suspend_Reached.png https://bugs.launchpad.net/linaro-android/+bug/1097241/+attachment/3837667/+files/Monitor_Display_After_Suspend_Reached.png |
|
| 2013-10-15 08:55:09 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=85
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.09-release/#build=6 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=85
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.09-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=127 |
|
| 2013-10-17 07:00:55 |
Naresh Kamboju |
bug |
|
|
added subscriber Naresh Kamboju |
| 2013-10-22 10:24:10 |
Botao |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=85
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.09-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=127 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=85
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.09-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=127
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.10-release/#build=2 |
|
| 2013-10-23 09:48:43 |
Naresh Kamboju |
description |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=85
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.09-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=127
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.10-release/#build=2 |
On ARM Versatile Express A9 board with Linaro Android Jelly Bean image:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
Set the suspend time to 15 seconds, then wait. The monitor can be turned off successfully when the interval reached, but if waiting for a longer time, for example, 10 minutes, the monitor is turned on automatically, although with a lower brightness.
The monitor should be always stayed in black after the suspend time reached, until an event wakes it up.
#########################################################################
This issue is observed on following images:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=152
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=158
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-armlt-tracking-open/#build=167
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.01-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=179
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=185
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=191
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.02-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=220
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.03-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=250
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.04-release/#build=5
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=291
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp/#build=325
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-mp-13.05-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.06-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.07-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=59
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-4.3-13.08-release/#build=1
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=85
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.09-release/#build=6
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro/#build=127
https://android-build.linaro.org/builds/~linaro-android/vexpress-linaro-13.10-release/#build=2
https://android-build.linaro.org/builds/~linaro-android/vexpress-lsk-13.10-release/#build=2 |
|
| 2013-10-30 21:01:35 |
vishal |
linaro-android: status |
New |
Won't Fix |
|
