smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: Hitachi HTS542516K9A300 Serial Number: 080608BB6303ACJ3P6KG Firmware Version: BBCOC3MP User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3f Local Time is: Sat Oct 24 16:13:31 2009 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 75) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0023 253 100 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 2189 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 65543 7 Seek_Error_Rate 0x000f 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 3983 10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1422 184 Unknown_Attribute 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 059 059 000 Old_age Always - 4259881 188 Unknown_Attribute 0x0032 100 095 000 Old_age Always - 963 190 Airflow_Temperature_Cel 0x0022 062 048 000 Old_age Always - 38 (Lifetime Min/Max 28/49) 191 G-Sense_Error_Rate 0x000a 099 094 000 Old_age Always - 65537 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 7536755 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 37479 194 Temperature_Celsius 0x0022 144 100 000 Old_age Always - 38 (Lifetime Min/Max 21/52) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x002a 200 200 000 Old_age Always - 0 223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 40 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 40 occurred at disk power-on lifetime: 2480 hours (103 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 74 f4 7c e3 Error: UNC at LBA = 0x037cf474 = 58520692 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 01 74 f4 7c e0 00 05:02:50.400 READ VERIFY SECTOR(S) EXT 42 00 01 73 f4 7c e0 00 05:02:50.400 READ VERIFY SECTOR(S) EXT 42 00 02 75 f4 7c e0 00 05:02:50.400 READ VERIFY SECTOR(S) EXT 25 00 01 30 02 17 e0 00 05:02:50.400 READ DMA EXT 42 00 02 73 f4 7c e0 00 05:02:46.200 READ VERIFY SECTOR(S) EXT Error 39 occurred at disk power-on lifetime: 2480 hours (103 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 74 f4 7c e3 Error: UNC at LBA = 0x037cf474 = 58520692 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 02 73 f4 7c e0 00 05:02:46.200 READ VERIFY SECTOR(S) EXT 25 00 01 40 9f 6d e0 00 05:02:46.200 READ DMA EXT 42 00 04 73 f4 7c e0 00 05:02:42.100 READ VERIFY SECTOR(S) EXT 25 00 01 40 d0 98 e0 00 05:02:42.100 READ DMA EXT 42 00 04 6f f4 7c e0 00 05:02:42.100 READ VERIFY SECTOR(S) EXT Error 38 occurred at disk power-on lifetime: 2480 hours (103 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 74 f4 7c e3 Error: UNC at LBA = 0x037cf474 = 58520692 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 04 73 f4 7c e0 00 05:02:42.100 READ VERIFY SECTOR(S) EXT 25 00 01 40 d0 98 e0 00 05:02:42.100 READ DMA EXT 42 00 04 6f f4 7c e0 00 05:02:42.100 READ VERIFY SECTOR(S) EXT 25 00 01 40 01 c4 e0 00 05:02:42.100 READ DMA EXT 42 00 08 77 f4 7c e0 00 05:02:42.100 READ VERIFY SECTOR(S) EXT Error 37 occurred at disk power-on lifetime: 2480 hours (103 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 74 f4 7c e3 Error: UNC at LBA = 0x037cf474 = 58520692 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 08 6f f4 7c e0 00 05:02:37.900 READ VERIFY SECTOR(S) EXT 25 00 01 00 00 00 e0 00 05:02:37.900 READ DMA EXT 42 00 10 6f f4 7c e0 00 05:02:33.700 READ VERIFY SECTOR(S) EXT 25 00 01 00 00 00 e0 00 05:02:33.700 READ DMA EXT 42 00 10 5f f4 7c e0 00 05:02:33.700 READ VERIFY SECTOR(S) EXT Error 36 occurred at disk power-on lifetime: 2480 hours (103 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 0b 74 f4 7c e3 Error: UNC at LBA = 0x037cf474 = 58520692 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 10 6f f4 7c e0 00 05:02:33.700 READ VERIFY SECTOR(S) EXT 25 00 01 00 00 00 e0 00 05:02:33.700 READ DMA EXT 42 00 10 5f f4 7c e0 00 05:02:33.700 READ VERIFY SECTOR(S) EXT 25 00 01 00 00 00 e0 00 05:02:33.700 READ DMA EXT 42 00 20 5f f4 7c e0 00 05:02:29.500 READ VERIFY SECTOR(S) EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3982 - # 2 Extended offline Completed without error 00% 3957 - # 3 Short offline Completed without error 00% 3956 - # 4 Extended offline Aborted by host 30% 3955 - # 5 Short offline Completed without error 00% 3953 - # 6 Extended offline Aborted by host 90% 3953 - # 7 Extended offline Aborted by host 70% 162 - # 8 Short offline Completed without error 00% 162 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.