|-------------------------------------------------------------------------------+----------------------------------------------------------------| | client (saenger) - 10.228.68.199 | server (segers) - 10.228.68.119 | |-------------------------------------------------------------------------------+----------------------------------------------------------------| | sudo modprobe ib_umad | | | sudo modprobe hns-roce-hw-v2 | | | sudo apt install -y perftest | sudo modprobe ib_umad | | | sudo modprobe hns-roce-hw-v2 | | | sudo apt install -y perftest | | ib_atomic_bw -d hns_0 -A CMP_AND_SWAP -e & | | | | ib_atomic_bw -d hns_0 -A CMP_AND_SWAP -e & | | | echo 7 > /proc/sys/kernel/printk | | | echo 1 > /sys/class/net/enp189s0f0/device/sriov_numvfs | | | echo help > /sys/kernel/debug/hns3/0000\:bd\:00.0/cmd | | | ethtool -s enp189s0f0 msglvl 0x0 | | | ethtool -s enp189s0f0 msglvl probe on | | | fping 10.228.68.199 # OK | | | sudo modprobe rdma_ucm # needed for next command | | | ib_send_bw -d hns_0 -x 0 -c RC --use-srq -R & | | | ib_send_bw -d hns_0 -x 0 -c RC --use-srq -R 10.228.68.119 & | | ib_send_bw -d hns_0 -x 0 -c RC --use-srq -R --run_infinitely & | | | ib_send_bw -d hns_0 -x 0 -c RC --use-srq -R 10.228.68.119 --run_infinitely[*] | | | | sudo apt install -y netperf | | | sudo ethtool -N enp189s0f0 rx-flow-hash udp4 sdfn | | | watch -d -n 1 "ethtool -S enp189s0f0 | grep rxq | grep pktnum" | | | sudo ethtool -N enp189s0f0 rx-flow-hash udp4 d | | sudo apt install -y netperf | | | netperf -H 10.228.68.119 -t UDP_STREAM -l 10 -- -m 10240 | | | netperf -H 10.228.68.119 -t UDP_STREAM -l 10 -- -m 10240 | | | netperf -H 10.228.68.119 -t UDP_STREAM -l 10 -- -m 10240 | | | | ^c previous ib_send_bw commands | | | ib_send_bw -d hns_0 -n 5 -s1024 -S 3 -x 3 | | ib_send_bw -d hns_0 -n 5 -s1024 -S 3 -x 3 10.228.68.11 | | | sudo ufw disable | | | | sudo ufw disable | [*] Command failed: hr_qp->port_num= 0x1 Unexpected CM event bl blka 8 Unable to perform rdma_client function Unable to init the socket connection