Rozumiem że z odpowiedzi Sandipa wynika że wszystko OK? -- Marcin Orkiszewski Od: Sandip Dey Data: poniedziałek, 20 sierpnia 2018 18:39 Do: Marcin Orkiszewski , Ram Yadav , Aswani Kumar Gaddam , Sachchidanand Vaidya , Sudheendra Rao DW: Adrian Szczepański , Amudha R , Artur Dębski , Krzysztof Gromadzki Temat: Re: steps to run sanity on vCenter local setup's Hi Marcin Magda had access to the this environment.Could you check with her.She once accessed my setup. Response inline…. Regards Sandip From: Marcin Orkiszewski Date: Monday, August 20, 2018 at 9:44 PM To: Sandip Dey , Ram Yadav , Aswani Kumar Gaddam , Sachchidanand Vaidya , Sudheendra Rao Cc: Adrian Szczepański , Amudha R , Artur Dębski , Krzysztof Gromadzki Subject: Re: steps to run sanity on vCenter local setup's Hi Sandip, Could you please check on your test environment the following issues? 1. Verify if hostnames on ContrailVM virtual machines are unique - hostname as in the name of the host as reported by the OS, not vCenter VM name (verify the output of 'hostname' command on ContrailVM shell, and the content of /etc/hostname file) +++sandipd:The hostnames are different in 3 contrail-vms.If hostnames are same,vrouter agent does not come up.Just pasting output from one contrail-vm [root@nodek4-compute-vm ~]# [root@nodek4-compute-vm ~]# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES be477c351f85 10.204.217.152:5000/contrail-vcenter-manager:ocata-5.0-168 "/entrypoint.sh /b..." 4 hours ago Up 4 hours vcenter_manager_vcenter-manager_1 9f2ae0c8d086 10.204.217.152:5000/contrail-vrouter-agent:ocata-5.0-168 "/entrypoint.sh /u..." 4 hours ago Up 4 hours vrouter_vrouter-agent_1 f39c578866e8 10.204.217.152:5000/contrail-nodemgr:ocata-5.0-168 "/entrypoint.sh /b..." 4 hours ago Up 4 hours vrouter_nodemgr_1 [root@nodek4-compute-vm ~]# docker exec -it 9f2ae0c8d086 bash (vrouter-agent)[root@nodek4-compute-vm /]$ hostname nodek4-compute-vm (vrouter-agent)[root@nodek4-compute-vm /]$ cat /etc/hostname nodek4-compute-vm (vrouter-agent)[root@nodek4-compute-vm /]$ 2. Verify if docker containers of contrail-vrouter-agent on ContrailVMs also have unique hostnames (run bash inside the container and check output of 'hostname' command and the content of /etc/hostname file inside the container) +++sandipd: Replied as above 3. Verify if there are port errors (vrf-name) in vrouter-agent introspect on ContrailVMs (http://localhost:8085/Snh_ItfReq) The above issues may cause problems with assigning IP addresses to the VMs (we came across such cases during development). Could you let us know if the above issues are correct? (+cc Krzysztof Gromadzki and Artur Debski) +++sandipd:Ports are created properly.There is no problem from contrail side. Also, we could help in more detail, if we could look at the failing testing environment, but we have trouble getting in via VPN. We want to access the vCenter at 10.204.217.246:9443 and Contrail Controller at 10.204.216.61. Those machines respond to ping but we are unable to access the UIs via browser or login via SSH. Do you have the possibility to verify if this access works? Thanks, -- Marcin Orkiszewski Project Manager +48 736 658 288 CodiLime Sp. z o.o. - Ltd. company with its registered office in Poland, 02-493 Warsaw, ul. Krancowa 5.Registered by The District Court for the Capital City of Warsaw, XII Commercial Department of the National Court Register.Entered into National Court Register under No. KRS 0000388871. Tax identification number (NIP) 5272657478. Statistical number (REGON) 142974628. Od: Sandip Dey Data: poniedziałek, 20 sierpnia 2018 14:25 Do: Ram Yadav , Aswani Kumar Gaddam , Sachchidanand Vaidya , Sudheendra Rao DW: Marcin Orkiszewski , Adrian Szczepański , Amudha R Temat: Re: steps to run sanity on vCenter local setup's Hi Ram We could not reproduce the problem in your setup. Then we tried in our setup and its easily reproducible.Out of 3 vms, 2 did not get ips. In your setup you have contrail-master + vcenter Version 6.5.0.13000 Build 7515524 I am running contrail ocata-5.0-168 + vcenter Version 6.5.0 Build 5705665 You can use my setup to compare if needed https://10.204.217.246:9443/ username: password: Contrail123! The config files are https://github.com/Juniper/contrail-tools/tree/R5.0/yamls/vcenter/c4_clutser/multi-interface Regards Sandip From: Sandip Dey Date: Monday, August 20, 2018 at 12:03 PM To: Ram Yadav , Aswani Kumar Gaddam , Sachchidanand Vaidya , Sudheendra Rao Cc: Marcin Orkiszewski , Adrian Szczepański , Amudha R Subject: Re: steps to run sanity on vCenter local setup's Hi Ram We are trying in your setup.Will let you know. Regards Sandip From: Ram Yadav Date: Monday, August 20, 2018 at 11:58 AM To: Aswani Kumar Gaddam , Sachchidanand Vaidya , Sudheendra Rao , Sandip Dey Cc: Marcin Orkiszewski , Adrian Szczepański , Amudha R Subject: Re: steps to run sanity on vCenter local setup's Single ping test passed. [root@ab0e1c12eb88 contrail-test]# python -m testtools.run scripts.vm_regression.test_vm_basic.TestBasicVMVN.test_ping_within_vn Tests running... 2018-08-19 22:46:07,024 - INFO - Ping to IP 92.231.138.250 from VM ctest-vm1-09003512 passed [ubuntu@169.254.0.7] sudo: ping -s 56 -c 5 -W 1 92.231.138.252 [ubuntu@169.254.0.7] out: PING 92.231.138.252 (92.231.138.252) 56(84) bytes of data. [ubuntu@169.254.0.7] out: 64 bytes from 92.231.138.252: icmp_req=1 ttl=64 time=0.967 ms [ubuntu@169.254.0.7] out: 64 bytes from 92.231.138.252: icmp_req=2 ttl=64 time=0.601 ms [ubuntu@169.254.0.7] out: 64 bytes from 92.231.138.252: icmp_req=3 ttl=64 time=0.938 ms [ubuntu@169.254.0.7] out: 64 bytes from 92.231.138.252: icmp_req=4 ttl=64 time=0.544 ms [ubuntu@169.254.0.7] out: 64 bytes from 92.231.138.252: icmp_req=5 ttl=64 time=0.769 ms [ubuntu@169.254.0.7] out: [ubuntu@169.254.0.7] out: --- 92.231.138.252 ping statistics --- [ubuntu@169.254.0.7] out: 5 packets transmitted, 5 received, 0% packet loss, time 4000ms [ubuntu@169.254.0.7] out: rtt min/avg/max/mdev = 0.544/0.763/0.967/0.174 ms [ubuntu@169.254.0.7] out: 2018-08-19 22:46:22,340 - INFO - Ping to IP 92.231.138.252 from VM ctest-vm3-08653530 passed 2018-08-19 22:46:22,341 - INFO - Deleting VM ctest-vm3-08653530 2018-08-19 22:46:26,430 - INFO - Deleting VM ctest-vm2-81074936 2018-08-19 22:46:30,578 - INFO - Deleting VM ctest-vm1-09003512 2018-08-19 22:46:34,666 - INFO - Deleting VN ctest-vn30-93720575 2018-08-19 22:46:39,465 - INFO - END TEST : test_ping_within_vn : PASSED[0:22:14] 2018-08-19 22:46:39,465 - INFO - -------------------------------------------------------------------------------- Ran 1 test in 1369.229s OK We are not able to recreate the DHCP issue. Thanks, Ram From: Ram Yadav Date: Sunday, August 19, 2018 at 10:26 PM To: Aswani Kumar Gaddam , Sachchidanand Vaidya , Sudheendra Rao , Sandip Dey Cc: Marcin Orkiszewski , Adrian Szczepański , Amudha R Subject: Re: steps to run sanity on vCenter local setup's I rebooted both contrailVM’s to get the IP back. But still the question remain what caused it. Only thing run before getting into this state was sanity. From: Ram Yadav Date: Sunday, August 19, 2018 at 10:19 PM To: Aswani Kumar Gaddam , Sachchidanand Vaidya , Sudheendra Rao , Sandip Dey Cc: Marcin Orkiszewski , Adrian Szczepański , Amudha R Subject: Re: steps to run sanity on vCenter local setup's Aswani, Looks like the IP address for contrail VM got changed messed up. Does the sanity run play around with contrailVM IP’s? IP address got unassigned for both VM’s. Thanks, Ram From: Ram Yadav Date: Sunday, August 19, 2018 at 10:08 PM To: Aswani Kumar Gaddam , Sachchidanand Vaidya , Sudheendra Rao , Sandip Dey Cc: Marcin Orkiszewski , Adrian Szczepański , Amudha R Subject: Re: steps to run sanity on vCenter local setup's Aswani, In the same container I’m running single test case and it fails: [root@a3s10 ~]# docker attach ab0e1c12eb88 [root@ab0e1c12eb88 contrail-test]# export PYTHONPATH=$PATH:$PWD:$PWD/fixtures:$PWD/scripts [root@ab0e1c12eb88 contrail-test]# export TEST_CONFIG_FILE=contrail_test_input.yaml [root@ab0e1c12eb88 contrail-test]# python -m testtools.run scripts.vm_regression.test_vm_basic.TestBasicVMVN.test_ping_within_vn Tests running... ====================================================================== ERROR: setUpClass (scripts.vm_regression.test_vm_basic.TestBasicVMVN) ---------------------------------------------------------------------- Traceback (most recent call last): File "scripts/vm_regression/test_vm_basic.py", line 27, in setUpClass super(TestBasicVMVN, cls).setUpClass() File "scripts/vm_regression/base.py", line 12, in setUpClass super(BaseVnVmTest, cls).setUpClass() File "test_v1.py", line 13, in setUpClass super(BaseTestCase_v1, cls).setUpClass() File "test.py", line 79, in setUpClass cls.inputs = ContrailTestInit(cls.input_file,logger = cls.logger) File "common/contrail_test_init.py", line 853, in __init__ self.inputs = TestInputs(input_file, self.logger) File "tcutils/util.py", line 997, in __call__ Singleton, cls).__call__(*args, **kwargs) File "common/contrail_test_init.py", line 102, in __init__ self.parse_yml_file() File "common/contrail_test_init.py", line 450, in parse_yml_file self.parse_topo() File "common/contrail_test_init.py", line 302, in parse_topo hostname = self.run_cmd_on_server(host_data['host_ip'], 'hostname') File "common/contrail_test_init.py", line 834, in run_cmd_on_server shell_prefix=shell_prefix) File "tcutils/util.py", line 814, in run_cmd_on_server output = _run(updated_cmd, pty=pty) File "/usr/lib/python2.7/site-packages/fabric/network.py", line 633, in host_prompting_wrapper return func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/fabric/operations.py", line 1095, in sudo stderr=stderr, timeout=timeout, shell_escape=shell_escape, File "/usr/lib/python2.7/site-packages/fabric/operations.py", line 909, in _run_command channel=default_channel(), command=wrapped_command, pty=pty, File "/usr/lib/python2.7/site-packages/fabric/state.py", line 387, in default_channel chan = _open_session() File "/usr/lib/python2.7/site-packages/fabric/state.py", line 379, in _open_session return connections[env.host_string].get_transport().open_session() File "/usr/lib/python2.7/site-packages/fabric/network.py", line 154, in __getitem__ self.connect(key) File "/usr/lib/python2.7/site-packages/fabric/network.py", line 146, in connect user, host, port, cache=self, seek_gateway=seek_gateway) File "/usr/lib/python2.7/site-packages/fabric/network.py", line 559, in connect raise NetworkError(msg, e) NetworkError: Timed out trying to connect to 10.84.16.23 (tried 1 time) Ran 0 tests in 10.044s FAILED (failures=1) What could be the issue. But similar ping test case passed in the sanity run. Thanks, Ram From: Aswani Kumar Gaddam Date: Saturday, August 18, 2018 at 9:44 AM To: Sachchidanand Vaidya , Sudheendra Rao , Ram Yadav , Sandip Dey Cc: Marcin Orkiszewski , Adrian Szczepański , Amudha R Subject: Re: steps to run sanity on vCenter local setup's Sachin, I triggered the sanity in the following container and its running now [root@a3s10 ~]# docker attach ab0e1c12eb88 [root@ab0e1c12eb88 contrail-test]# bash -x run_tests.sh -T vcenter --send-mail -U 2018-08-18 09:41:56,829 - INFO - ================================================================================ 2018-08-18 09:41:56,829 - INFO - STARTING TEST : test_contrail_alarms 2018-08-18 09:41:56,831 - INFO - TEST DESCRIPTION : Test to check if alarms are present 2018-08-18 09:42:00,114 - INFO - Initial checks done. Running the testcase now 2018-08-18 09:42:00,115 - INFO - 2018-08-18 09:42:03,333 - INFO - END TEST : test_contrail_alarms : PASSED[0:00:07] 2018-08-18 09:42:03,334 - INFO - -------------------------------------------------------------------------------- 2018-08-18 09:42:03,339 - INFO - ================================================================================ 2018-08-18 09:42:03,339 - INFO - STARTING TEST : test_contrail_status 2018-08-18 09:42:03,339 - INFO - TEST DESCRIPTION : Test to verify that all services are running and active Thanks, Aswani Kumar From: Sachchidanand Vaidya Date: Saturday, 18 August 2018 at 10:03 PM To: Madhava Rao Sudheendra Rao , Ram Yadav , Sandip Dey , Aswani Kumar Gaddam Cc: Marcin Orkiszewski , Adrian Szczepański , Amudha R Subject: Re: steps to run sanity on vCenter local setup's Ok. Single Sanity run passed. 2018-08-18 08:53:06,766 - INFO - END TEST : test_ping_within_vn : PASSED[0:26:42] 2018-08-18 08:53:06,766 - INFO - -------------------------------------------------------------------------------- But I’m trying to run complete Sanity using following command: [root@ab0e1c12eb88 contrail-test]# ./run_tests.sh -T venter --send-mail - The run was over immediately.. Sandip/ Sudhee, can you pls let us what the error is here ? I have attached complete log to the mail. Relevant logs are included : [root@10.84.16.10] sudo: systemctl enable nfs-server.service [root@10.84.16.10] sudo: systemctl start nfs-server.service [root@10.84.16.11] run: vim-cmd hostsvc/vmotion/vnic_set vmk0 [root@10.84.16.12] run: vim-cmd hostsvc/vmotion/vnic_set vmk0 Exception in thread Thread-8 (most likely raised during interpreter shutdown):Exception in thread Thread-3 (most likely raised during interpreter shutdown): Traceback (most recent call last): [localhost] local: rpm -q --queryformat '%{VERSION}-' contrail-test; rpm -q --queryformat '%{RELEASE}' contrail-test | awk -F'.' '{print $1}' Exception in thread Thread-3 (most likely raised during interpreter shutdown):Generated report_details* file: report_details_2018_08_18_09_29_40.ini could not change test cases names could not change test cases names Buildfile: /contrail-test/build.xml junit-report: [delete] Deleting directory /contrail-test/report [junitreport] Processing /contrail-test/report/TESTS-TestSuites.xml to /contrail-test/report/junit-noframes.html [junitreport] Loading stylesheet /contrail-test/junit-noframes.xsl [junitreport] Warning: org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser: Property 'http://javax.xml.XMLConstants/property/accessExternalDTD' is not recognized. [junitreport] Warning: org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser: Property 'http://www.oracle.com/xml/jaxp/properties/entityExpansionLimit' is not recognized. [junitreport] Transform time: 324ms BUILD SUCCESSFUL Total time: 0 seconds Generate HTML reports in report/ folder : report/junit-noframes.html logs/tcutils.util.log logs/tcutils.config.vcenter_verification.log logs/__main__.log logs/tcutils.collector.opserver_results.log logs/introspect.log logs/a3s10-tracebacks.log logs/a3s10-ignored_tracebacks.log logs/a3s10-traceback_parse_failures.log logs/common.contrail_test_init.log logs/testbasicvmvn.log Converted log files to html files [root@10.84.16.10] put: tools/search-bt.py -> /tmp/search-bt.py Traceback details will be in /tmp/a3s10-tracebacks.log Ignored Traceback details will be in /tmp/a3s10-ignored_tracebacks.log Traceback parse errors will be in /tmp/a3s10-traceback_parse_failures.log Done looking for tracebacks [root@10.84.16.10] download: /contrail-test/logs/a3s10-tracebacks.log <- /tmp/a3s10-tracebacks.log Warning: Local file /contrail-test/logs/a3s10-tracebacks.log already exists and is being overwritten. Warning: get() encountered an exception while downloading '/tmp/a3s10-tracebacks.log' Underlying exception: No such file [root@10.84.16.10] download: /contrail-test/logs/a3s10-ignored_tracebacks.log <- /tmp/a3s10-ignored_tracebacks.log Warning: Local file /contrail-test/logs/a3s10-ignored_tracebacks.log already exists and is being overwritten. Warning: get() encountered an exception while downloading '/tmp/a3s10-ignored_tracebacks.log' Underlying exception: No such file [root@10.84.16.10] download: /contrail-test/logs/a3s10-traceback_parse_failures.log <- /tmp/a3s10-traceback_parse_failures.log Warning: Local file /contrail-test/logs/a3s10-traceback_parse_failures.log already exists and is being overwritten. Warning: get() encountered an exception while downloading '/tmp/a3s10-traceback_parse_failures.log' Underlying exception: No such file Exception in thread Thread-3 (most likely raised during interpreter shutdown): Uploaded reports Not all mail server details are available. Skipping mail send. Sent mail to interested parties [root@ab0e1c12eb88 contrail-test]# Thanks, Sachin From: Sachchidanand Vaidya Date: Saturday, August 18, 2018 at 8:30 AM To: Sudheendra Rao , Ram Yadav , Sandip Dey , Aswani Kumar Gaddam Cc: Marcin Orkiszewski , Adrian Szczepański , Amudha R Subject: Re: steps to run sanity on vCenter local setup's After removing nfs-ds from ESXI hosts datastore, test is running now. I will post the result once the tests are run. Thanks Sachin From: Sudheendra Rao Date: Saturday, August 18, 2018 at 4:15 AM To: Ram Yadav , Sandip Dey , Aswani Kumar Gaddam Cc: Sachchidanand Vaidya , Marcin Orkiszewski , Adrian Szczepański , Amudha R Subject: Re: steps to run sanity on vCenter local setup's Hi Ram, Sandip had already mentioned that automation code expects that vcenter_vars.yaml has ‘server1’ only under ‘vcenter_servers’, anything else will result in error. Change all occurrence of SRV1 in vcenter_vars.yaml to server1 and launch new test container using test_runner.sh I tried and it got past that stage, but seeing below error, I don’t understand this, please check – the test container is ab0e1c12eb88 [root@ab0e1c12eb88 contrail-test]# python -m testtools.run scripts.vm_regression.test_vm_basic.TestBasicVMVN.test_ping_within_vn : : [root@10.84.16.10] out: Created symlink from /etc/systemd/system/multi-user.target.wants/nfs-server.service to /usr/lib/systemd/system/nfs-server.service. [root@10.84.16.10] out: [root@10.84.16.10] sudo: systemctl start nfs-server.service ====================================================================== ERROR: setUpClass (scripts.vm_regression.test_vm_basic.TestBasicVMVN) ---------------------------------------------------------------------- Traceback (most recent call last): File "scripts/vm_regression/test_vm_basic.py", line 27, in setUpClass super(TestBasicVMVN, cls).setUpClass() File "scripts/vm_regression/base.py", line 12, in setUpClass super(BaseVnVmTest, cls).setUpClass() File "test_v1.py", line 38, in setUpClass cls.admin_isolated_creds.setUp() File "common/isolated_creds.py", line 132, in setUp password=self.password) File "common/connections.py", line 68, in __init__ self.vnc_lib = self.get_vnc_lib_h() File "common/connections.py", line 167, in get_vnc_lib_h env[attr].setUp() File "/contrail-test/fixtures/vnc_api_test.py", line 113, in setUp if self.orch: File "/contrail-test/fixtures/vnc_api_test.py", line 178, in orch self._orch = self.get_orch_h() File "/contrail-test/fixtures/vnc_api_test.py", line 201, in get_orch_h logger=self.logger) File "/contrail-test/fixtures/vcenter.py", line 144, in __init__ self._nfs_ds = NFSDatastore(self._inputs, self) File "tcutils/util.py", line 997, in __call__ Singleton, cls).__call__(*args, **kwargs) File "/contrail-test/fixtures/vcenter.py", line 92, in __init__ host.configManager.datastoreSystem.CreateNasDatastore(spec) File "/usr/lib/python2.7/site-packages/pyVmomi/VmomiSupport.py", line 580, in self.f(*(self.args + (obj,) + args), **kwargs) File "/usr/lib/python2.7/site-packages/pyVmomi/VmomiSupport.py", line 386, in _InvokeMethod return self._stub.InvokeMethod(self, info, args) File "/usr/lib/python2.7/site-packages/pyVmomi/SoapAdapter.py", line 1366, in InvokeMethod raise obj # pylint: disable-msg=E0702 vim.fault.DuplicateName: (vim.fault.DuplicateName) { dynamicType = , dynamicProperty = (vmodl.DynamicProperty) [], msg = "The name 'nfs-ds' already exists.", faultCause = , faultMessage = (vmodl.LocalizableMessage) [], name = 'nfs-ds', object = 'vim.Datastore:10.84.16.10:/nfs' } Ran 0 tests in 25.285s FAILED (failures=1) Thanks, Sudhee. From: Ram Yadav Date: Saturday, 18 August 2018 at 6:21 AM To: Sandip Dey Cc: Sachchidanand Vaidya , Sandip Dey , Marcin Orkiszewski , Sudheendra Rao , Adrian Szczepański , Amudha R Subject: Re: steps to run sanity on vCenter local setup's Hi Sandip, I pulled in the docker image: contrail-test-test:master-221 And followed the steps for single sanity test case run. I’m getting the following error: ERROR: setUpClass (scripts.vm_regression.test_vm_basic.TestBasicVMVN) ---------------------------------------------------------------------- Traceback (most recent call last): File "scripts/vm_regression/test_vm_basic.py", line 27, in setUpClass super(TestBasicVMVN, cls).setUpClass() File "scripts/vm_regression/base.py", line 12, in setUpClass super(BaseVnVmTest, cls).setUpClass() File "test_v1.py", line 13, in setUpClass super(BaseTestCase_v1, cls).setUpClass() File "test.py", line 79, in setUpClass cls.inputs = ContrailTestInit(cls.input_file,logger = cls.logger) File "common/contrail_test_init.py", line 853, in __init__ self.inputs = TestInputs(input_file, self.logger) File "tcutils/util.py", line 997, in __call__ Singleton, cls).__call__(*args, **kwargs) File "common/contrail_test_init.py", line 102, in __init__ self.parse_yml_file() File "common/contrail_test_init.py", line 589, in parse_yml_file self.vcenter_dc = _parse_vcenter.vcenter_dc File "common/contrail_test_init.py", line 1466, in vcenter_dc Test container is spawned on 10.84.16.10. /root/contrail-ansible-deployer has the contrail_test_input.yml and vcenter_vars.yml Thanks, Ram From: Ram Yadav Date: Tuesday, August 14, 2018 at 4:31 PM To: Adrian Szczepański , Amudha R Cc: Sachchidanand Vaidya , Sandip Dey , Marcin Orkiszewski Subject: steps to run sanity on vCenter local setup's Hello, Below is the instruction to run sanity 1.wget https://github.com/Juniper/contrail-test/raw/master/testrunner.sh 2.docker pull 10.204.217.152:5000/contrail-test-test:ocata-5.0- 3../testrunner.sh run -s -P contrail_test_input.yml,vcenter_vars.yml 10.204.217.152:5000/contrail-test-test:ocata-5.0- 4.cd contrail-test 5.export TEST_CONFIG_FILE=contrail_test_input_useit.yaml 6./run_tests.sh -T venter --send-mail - To run a single test case 1.wget https://github.com/Juniper/contrail-test/raw/master/testrunner.sh 2.docker pull 10.204.217.152:5000/contrail-test-test:ocata-5.0- 3../testrunner.sh run -s -P contrail_test_input.yml,vcenter_vars.yml 10.204.217.152:5000/contrail-test-test:ocata-5.0- 4.cd contrail-test 5.export PYTHONPATH=$PATH:$PWD:$PWD/fixtures:$PWD/scripts 6.export TEST_CONFIG_FILE=contrail_test_input_useit.yaml 7.python -m testtools.run scripts.vm_regression.test_vm_basic.TestBasicVMVN.test_ping_within_vn Docker pull needs to be done on ci-repo.englab.juniper.net or local repo as mentioned in the above step which is Bangalore local repo. Apart from this you will need set of vmdk file which was copied by Sandip Dey at some sunnyvale location. Sandip, Can provide detail on the file’s that we need to copy say to codilime’s server locally for sanity to run on there setup? Thanks, Ram Błąd! Nie podano nazwy pliku. ------------------------------- The information in this email is confidential and may be legally privileged, it may contain information that is confidential in CodiLime Sp. z o. o. It is intended solely for the addressee. Any access to this email by third parties is unauthorized. If you are not the intended recipient of this message, any disclosure, copying, distribution or any action undertaken or neglected in reliance thereon is prohibited and may result in your liability for damages. -- ------------------------------- The information in this email is confidential and may be legally privileged, it may contain information that is confidential in CodiLime Sp. z o. o. It is intended solely for the addressee. Any access to this email by third parties is unauthorized. If you are not the intended recipient of this message, any disclosure, copying, distribution or any action undertaken or neglected in reliance thereon is prohibited and may result in your liability for damages.